System reboots after game starts processing 3d

Got a 970gtx gaming 4g a couple of weeks ago and it seemed as though it was fine when running on my old i7 930 and ASRock x58 extreme3 with windows 7 ultimate.
Yesterday I upgraded my motherboard and cpu to an ASRock z97 extreme6 and an i5 4690k and made the move to Windows 8.1 pro. Today I got around to doing a little bit of gaming and after about 20mins the screen went black and system rebooted. There was no dump file and no log in the event viewer beyond a kernel warning. Now whenever I boot up a game it might go through 2d loading screens fine but as soon as there are polygons to process the system is suddenly back on the bios splash screen.
I've pulled the 970 out and tested it with onboard gfx and my old 2gb 560 ti and it is fine. I haven't gotten around to swapping the MB and CPU back yet to test. Is this likely to be an old fashioned hardware incompatibility? Anything else I can do to attempt to get it working?

I know it is only software monitoring, but I noticed that when the 970 is in my 12v rail voltage drops pretty low (seen readings as low as 10.1), but when my other cards are in it stays between 11.7 and 12.2. The next step is to add the pci express power to the MB.

Similar Messages

I can't download OS5 or, rather, iTunes does download it about 450 mb and then, a few seconds after it starts processing the file, I get the message that I am timed out and am recommended to check my internet connection. I am using 3g to download it.

I can't download OS5 or, rather, iTunes does download it about 450 mb and then, a few seconds after it starts processing the file, I get the message that I am timed out and am recommended to check my internet connection. I am using 3g to download it.

I don't know which country you're in, but in the US, carriers limit the amount of download for a single file when using 3G. Have you tried wifi?

System reboots in games

*Edited*
Ok lets do this one more time.
First of all this is what i use. Windows XP SP2.
P4 3,4 GHz Prescott socket 775 with a Zalman 7700 Cu cooler. Soltek SL-915GPRO-FGR mainboard. Corsair 2x512 DDR Dual Channel memory and MSI GeForce NX6800-TD256E VGA with a AC Silencer 5 cooler. In windows i have no problems but when i start a game it freezed. Sometime almost directly and sometimes it takes a while 1-5 minutes. Games it has happened in yet is Everquest2, Battlefield 1942, Doom3, Counter-Strike. Systems freezes and sometimes after a while it reboots. Since i have good cooling on but CPU and VGA i dont think that the temp is the problem. Tried clocking down my card as i read in other posts but with the same result, it freezes. Using the 71.22 driver MSI has on its homepage. If anyone got any idea what the problem might be please post.

Sounds like you have been struck down by the 6800 "feature" that i have been plauged with.
Try these things to confirm it.
1) Memtest86+ test for RAM
2) Clean driver install (use Detenator RIP or DriverCleaner)
3) Unplug all unneccesary CD drives/HDs.... ie bootup with only C: installed.
4) Underclock to ~400MHz DDR (i.e 2x200MHz)
If the underclock works, you have a dodgy card. A solution to this blackscreen problem has been found, and you have allready fitted a new fan = NO RMA. My card worked at 300MHz core and 520Mhz DDR. Should of been 300*700...
Hope this helps
Bila
PS: AGP voltage is irrelavent as it takes it all from the 12V line of the PSU directly.

Slower system reboot after installed CC Apps. Why?

I have a 2011 thunderbolt 17 inch macbook pro with an SSD HD and 8 gigs of ram installed. When I installed my SSD, my computer would complete a restart cycle in 20 seconds. But after I installed the CC apps my computer reboots in about 40-45 seconds now. Im sure it is the CC apps that are causing this additional boot time because I did a clean install of my OS 10.8 and did my reboot before I installed the apps and it was back to its 20 second reboot. Once I reinstalled the CC Apps it was at 40 secs again. Does anyone know why the CC apps cause this additional time to my reboot? Im just curious?

Hi AzzieScott,
No sure, but things I wondered about - how long does a restart take if you started the mac in safe boot. Does ending any Adobe processes with Activity Monitor prior to the restart make it take 20 seconds again?
-Dave

MSI X79A-GD65 (8D) -- system reboots after 2 minutes ...

MSI X79A-GD65 (8D)
Intel® Core™ i7-3930K
G.Skill DIMM 32 GB DDR3-1600 - F3-12800CL10Q-32GBZL,RipjawsZ-Serie
Noctua NH-D14 SE2011
PNY Quadro 4000
Power supply CMPSU-750AX
BIOS Version: E7760IMS 1.7
Hi guys,
I'm in trouble! I have just assembled my new system with the components listed above. When I plug in the power supply I'm able to start the it. It runs for 1 to 2 minutes and I can call up the BIOS for instance. Everything seems to be fine. But then it crashes and tries to restart and get stuck on the POST code "dE" (I know, such a POST code doesn't exists...) When I turn it off, I'm not able to start again until I unplug the power supply for 10 minutes.
I have tried to start it with only one DDR3-RAM in DIMM one. I have already cleared the CMOS a couple of times with a jumper. I have removed the CMOS battery for a while, I have tried all 4 RAM's in DIMM 1....
It would be great if someone has an idea what's going on here. I go insane
Thanks,
Selwy

dammit! It's the PSU!! How is that possible!?
I have installed a old 550W Enermax PSU and it worked with all the new components - msi board, PNY Quadro, i73930k...
What I really don't understand is, why did the PSU worked with my old VGA this afternoon? It had a 6-pin connector too.
What do you guys think I should do now? Send to PSU back to Corsair and ask for a new one - same version? Or would it be better to get one from another brand? Or is there something I can test or adjust on the PSU before I send it back? Or is it even "broken enough" to send it back? I mean, it works - a little bit
Once again, thank you very much to all of you for your help!!

After iMessage start ChaxHelper App asks for System Code, after iMessage start ChaxHelper App asks for System Code

every time i start imessage under os x 10.8.2 a pop up window appears and ask "chaxhelperapp versucht befehler für beschränkte script additions an andere programme zu senden. geben sie ihr kennwort ein, um dies zu erlauben". Besides the synchronisation from imessages under all devices does not work propper.
can i install imessages new and where to find the dmg?
thx

every time i start imessage under os x 10.8.2 a pop up window appears and ask "chaxhelperapp versucht befehler für beschränkte script additions an andere programme zu senden. geben sie ihr kennwort ein, um dies zu erlauben". Besides the synchronisation from imessages under all devices does not work propper.
can i install imessages new and where to find the dmg?
thx

After update to IOS 7x some apps are crashing a lot & system Reboots!

After installing IOS 7.1.1 on 1 x iPhone 4 16GB, 3x iPhone 4s 64GB and 1 iPad mini 64GB, Apps started crashing which worked well on IOS 5.5 & IOS 6. After Updating to IOS 7, the problems started. Some of my favourite games like "Call Of Duty: Black Ops Zombies"and Avengers Initiative keep crashing at the start. "Call Of Duty" reported Low Memory even though I turned off Background App Refresh, Re-downloaded the Apps, performed full system reboot, enabled "Reduce Motion", enabled "Increase Contrast" and still no luck. I have also deleted many of my Apps to free up storage space but still no improvement. Other problems major problems are that the screen freezes and Apps become unresponsive requiring a full system reboot. This happens very often and also when trying to update or download Apps the system crashes and often Reboots itself. I believe the main problem is with low memory because I ran an App called "Battery Doctor" which shows that 82% of the 512MB RAM is already been used before any Apps have even been started leaving only 89MB of free RAM which is hardly enough to run decent Games on. There are many occasions when FaceTime wouldn't allow Sign In and in iTunes Apps would revert to how they were after applying changes. When adding Contacts, changes would often revert back. Also I have noticed that the iPhone sometimes would display the wrong amount of free Storage space and it would sometimes show like 5GB available and then go to 0MB available and cause crashes during downloads. Another problem I found was that when Apps start up, a white patch shows on the screen temporarily which wasn't apparent before IOS 7x. When adding contacts I noticed that with "Increase Contrast" disabled, some of the entries added did not display while typing with the keyboard and the text was greyed out making it difficult to read what you are typing. Now I wish that I had not updated to IOS 7 as suggested because it has messed up my £700 iPhones and I don't see a way of downgrading without Jailbreaking making my phones worthless. We are very very upset and disappointed because we paid so much money for the devices and have not had them long. We do not want to buy a newer device just because of the update messing up our phones. Also I do not want to try and restore from a previous backup because the last few times I've tried and it does not restore everything. It is very time consuming and I am too ill to go through all that again on each device. Also I believe the restore does not give me the choice of going back to IOS 5.5 or IOS 6. Therefore if Apple could give the opportunity to update to IOS 5.5 or IOS 6 for older devices and have a separate update for IPhone 5s which have a faster processor and double RAM (1GB) then I would be very grateful. I would also like to add the fact that IOS 7.x.x drains the battery very quickly. After reading the many complaints about IOS 7 update & my personal experience, I now regret updating and also fear that future updates may render my iPhones useless. I bought my iPhone 4s direct from Apple and paid a premium for Factory Unlocked iPhones. I think the iPhones may now be out of warranty and are very unhappy with this situation. Please, please please could you send a fix in another update!

Actually DIESEL they do force you to update. my wife has not update hers yet to ios6 and none of the apps work at full tilt anymore because they are all updated for ios 6....Apple is now making you either update(and ruin your iphone 4s) or buy the new iphone 5(which i doubt will have any of the problems people with iphone 4s are having).
Since updating my 4s i have lost signal, data has been very low at best. i can not access any apps or they open up and do not refresh. I use to have 4bars at my work and now i have 1.

TS1717 My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.

IMovie has frozen up on me. I've tried rebooting and reinstalling the apps- no help. I can play some of the files- but I can't get into the libraries.Even when I can get something to play the whole system crashes after a few minutes. What can I do?

I desperately need your help. I was working on iMovie last night when the thing froze up on me. I've tried rebooting. I've tried reinstalling the apps. No change. I can play some of the files- although I can't tell which ones will play until they magically appear. I can't get into the project library or the event library. The bar that lets me scroll through the clips is gone. Even when I can get something to play the whole system crashes after a couple of minutes and generates a "problem report" that says "iMovie Quit Unexpectedly". This all started when I was adding cutaways- and one clip just would not load. After I tried several times everything froze up. Have you ever heard of something like this? Maybe I pushed a button or somehow changed a setting? Maybe some of the video is corrupt? What do you recommend?
Thanks for any advice you can offer!

I have tried all the above and nothing seems to work. Any other suggestions?

Continues rebooting after installing system upgrade

Hi
I have a HP voicetab 7. Today (10.02.2015) got a system upgrade. after installing the system upgrade, my tab is switching on but stuckup in the boot screen.
what to do next.

Hey @jagan_0018 ,
Welcome to the HP Forums!
I understand after a failed update to KitKat your Slate 7 Voice Tab will not boot.
Please try the following.
1. Download the update.zip for your device and copy the file to the root directory of an empty micro-SD card (at least 1 GB, FAT 32 format). Do not unzip this file. You can find the update.zip for your device here: HP - Drivers & Downloads.
NOTE: You will need the exact model number to locate the correct package. There are multiple update.zip recovery images available. Ensure you select the correct download for your region. If your tablet does not boot after attempting to update you may need to try both the KitKat and JellyBean images. For information on finding your product or model number click here: Finding Your HP Product Model Number.
2. Fully charge the tablet and then disconnect the power from the device.
3. Power off the device.
If your tablets micro-SD slot is on the side or bottom of your tablet skip to step 5.
4a. Place the tablet on a flat surface, display panel side down, with the release notch towards you.
NOTE: Before positioning the tablet with the display panel facing down, make sure the work surface is clear of any foreign objects. Failure to follow this caution can result in damage to the display panel assembly.
4b. Remove the back cover. Use the release notch to remove the back cover.
4c. Insert the micro-SD memory card into the reader slot.
4d. Reverse the procedure detailed above to install the back cover.
5. Insert the micro-SD card into the micro-SD card reader.
6. Press and hold the volume up button and power button at the same time.
7. When the HP logo appears on the screen, release all the buttons.
8. When the Android system recovery menu appears, use the volume down button to highlight "apply update from external storage".
9. Press the power button to validate "apply update from external storage".
10. Use the volume down button to highlight the software recovery file, update.zip.
11. Press the power button to select the update.zip file and launch the recovery.
NOTE: Wait until the entire recovery process finishes. The device might seem unresponsive at times (multiple reboots and black screens) when it is performing the update.
If this does not resolve the issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

SAP system doesn't automatically start after restart (but manual start ok)

Hi,
We've got a new production line of SAP EP 7.0 systems, which have CI on HP-UX and DIs on windows. The version is NW2004s SPS09.
What we see is that after a restart of the windows servers (usually because of windows patching), the SAP system doesn't automatically start up. It doesn't start up if I restart the SAP<SID>_<instance> service either.
However, I've got no problem starting the system with the MMC.
Any idea what I am missing here? is it as simple as a profile parameter ?
As far as I can see the profile used seem ok.
After a restart of the windows server the following files have log entries in the c:\usr\sap\<SID>\J<instance>\work folder
sapstartsrv.log
trc file: "sapstartsrv.log", trc level: 0, release: "700"
Fri Nov 17 15:51:26 2006
<<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_LIB_NOT_FOUND
sapstart.log
Starting WebService thread
SapSSLInit failed => https support disabled
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_97
Webservice thread started, listening on port 59713
sapstart.trc
Starting WebService thread
SapSSLInit failed => https support disabled
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_97
Webservice thread started, listening on port 59713
The windows event log have the application events
(first)SAP Service SAP<SID>_<instance> successfully started.
(at the same time)
Failed to update service environment from user (STATOIL-NET\<sid>adm) environment. [ntservmgr.cpp 201]
(note that this doesn't happen for all systems which have this problem, for other there is no entry like this)
I see no failed login attemps in the security event log, but see the that a login is performed for SAPService<SID>.
Since it also fails to automatically startup when I restart the service, I am able to use filemon to see what happens at a file level. Here I see that it can access the shared file system without any problems, and can read the profile and everything.
MOM is running on the server and gets some Access denied errors since it doesn't have access to the shared file system, but I don't think that matters.
Cheers
Dagfinn

hi we are using sap bw 3.5 . database is oracle 9i
i applied a kernel patch and when i tried to start the services . there was no problem with the oracle services and saposcol but the service sap<sid>_nr did not start .
when i went to check the error in work folder ..
it say " SapSSLinit failed => https support disabled .
then i tried to start sap from cmd pmt . din`t work .
is there a way to statrt this ...
thanks alot.
arjun

I have a late 2006 iMac that has just started giving me a message to reboot after a black screen comes down slowly from the top top of the screen to the bottom. I reloaded software and restored from Time Machine, it now happens frequently. Any insight?

I have a late 2006 iMac that has just started giving me a message to reboot after a black screen comes down slowly from the top top of the screen to the bottom. I reloaded software and restored from Time Machine, but it keeps happening, now several tomes a day. Any insight as to the issue or a proposed solution?

Unplug any peripherals you have except your keyboard, reboot, and check activity monitor for apps. Keep running apps to a minimum to find the App causing the issue.

Error Start Process Scheduler after configure Crystal Path

Hi All,
Kindly help me to solve this issue. I'd installed Peoplesoft HCM 9.2, Application Server and Process Scheduler run sucessfull but after i install Crystal Report Runtime Redistribute 2008 and configure crystal path (C:\Program Files(x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86) i got this error when i try to start process scheduler
Booting admin processes ...
exec BBL -A :
process id=3164 ... started
1 process started
Attaching to active bulletin board.
> Attempting to boot ...
INFO: Oracle Tuxedo, Version 11.1.1.2.0 with VS2010, 64-bit, Patch Level (none)
Booting server processes ...
exec PSMSTPRC -0 ".\LOGS\stdout" -e ".\LOGS\stderr" -A -- -CD ORCL -PS PSNT -A start -S PSMSTPRC :
CMDTUX_CAT:1685: ERROR: Application initialization failure
CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
tmshutdown -qy

Hi all,
I am getting a similar message ...
failure: CORE3170: Configuration initialization failed: Error running init function load-modules: dlopen of /opt/SUNWwbsvr/plugins/passthrough/libpassthrough.so failed (ld.so.1: webservd: fatal: /opt/SUNWwbsvr/plugins/passthrough/libpassthrough.so: wrong ELF class: ELFCLASS64)
+/usr/bin/isainfo -kv+ gives *64-bit sparcv9 kernel modules*
I have also added the path of libpassthrough.so in LD_LIBRARY_PATH .
What can be the reason now ?
I had downloaded SP4. Does my webserver(sunone 6.1) also needs an update of service pack 4 then ? (It was installed about 2 months ago).

Start-Process : This command cannot be run due to the error: The system cannot find the file specified.

Hi,
I need some help with my script. It copies the file to the remote laptops but when it needs to install the .exe it fails.
If I run 1 line at the time in Powershell ISE, then it works. Somebody has an idea why it doesn't work or can help me on the right way?
Script:
$laptops = Get-Content -Path "C:\Users\bruyld01\Documents\STEPSTONE\Powershell\SAP\LaptopList.txt"
foreach ($laptop in $laptops)
Copy-Item "C:\Users\bruyld01\Desktop\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -Destination \\$laptop\C$\
Enter-PSSession $laptop
$version = Get-WmiObject -Class Win32_Product | where {$_.Name -like "*SAP Business*"} | Select-Object Version
if ($version -ne "135.0.2071.1047")
Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -ArgumentList "/quiet"
else
Write-Host "SAP outlook add-in is up to date!" -ForegroundColor Green
Exit-PSSession
Error message:
Start-Process : This command cannot be run due to the error: The system cannot find the file specified.
At line:2 char:1
+ Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [Start-Process], InvalidOperationException
+ FullyQualifiedErrorId : InvalidOperationException,Microsoft.PowerShell.Commands.StartProcessCommand
Thanks,
Dimitri

Hi,
Enter-PSSession is used for interactive remote sessions. Look into Invoke-Command instead.
http://ss64.com/ps/invoke-command.html
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Users added to a Task AFTER the BPM process has started

Does anyone know of a way to assign users to a task AFTER the BPM process has started?

Hi Craig,
whenever a Task Instance gets created, the assigned roles and groups are resolved into individual users. This means that changes to the roles and groups do not affect existing Task Instances.Then the only way to assign additional users is via "nominate" operation from the NWA or "delegate" from the Task UI. Such changes in the roles and groups will only take affect for newly created Task Instances.
Hope this helps.
Stefan

System reboots after game starts processing 3d

Similar Messages

Maybe you are looking for