System will hang up when I was using pen brush. Could you please advise me how to fix it...
Hi Sir,
當我使用調整筆刷時整個Lr 似乎就會變的很慢, 甚至停止回應..請問我要如何解決??
Thanks
foster
Hi, JEvansIII.
Thank you for visiting Apple Support Communities.
Try resetting your System Management Controller or SMC then launch iTunes after processing these steps. If the issue persists, try downloading a fresh copy of iTunes by accessing the second link below.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/en-us/HT201295
http://www.apple.com/itunes/
Cheers,
Jason H.
Similar Messages
-
After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.
IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost -
When I click email links on firefox, it opens AOL, but comes up like this.. "The file may not be supported by AOL, AOL will try to open it as a text file if you choose to continue" how to fix? and yeah, I know, ditch AOL and all that good stuff, but I have so many things tied into my email address that it's not in the cards atm..
Thanks!
*ChrisThat file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.
-
Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.
Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US
-
Hi,
Could you please tell me how to configure NSP as « trusted » system in the latest trial version of NetWeaver?
Please see the attachment.
Thanks,
MarcHi Marc,
go to transaction STRUSTSSO2, generate a certificate for your system, then add it to certicate list and to ACL for your client.
There will probabely be several parameters to set in instance profile if you plan to use SSO.
Best regards,
Vincent -
I have Xerox 3140 printer. Mountain Lion version can not use my printer. could you please help me. I know little English. I would like to thank those who help.
I have a small office. I have three devices mac mini osx 10.08. your suggestions helped me. I would like to thank. I liked your help. partially solved the problem .. I installed the drivers from the other computers on the network. When printing a document, "no pages found" error occurs. and can not print the document. please help me. I do not want to get a new printer. thank you for friendship ...
-
Lightroom crashes at start up with the error message "Lightroom encountered an error when reading from its preview cache and needs to quit". Please advise on how to fix this error. Thanks
You probably need to delete your preview cache. See here
Why And How To Clear Your Lightroom Cache - Lightroom Fanatic
Preference and other file locations in Lightroom 5 -
The decline button is not showing up on IOS 7 iphone 5(when phone locked). could you please advise me on this?
Is it because the new itunes looks different.
View > Show Sidebar
Then it should work just the same as on your old computer. -
Could you please correct me - how to use
Could you please correct me how can I use category in WHERE condition ?
LOOP AT gt_zgfld_prctr
INTO wa_zgfld_prctr
<b>WHERE category CO LIMIT_PRCTR%</b>.
Thanks,Hi,
Please try this.
ranges: r_category for gt_zgfld_prctr-category.
r_category-sign = 'I'.
r_category-option = 'CP'.
r_category-low = 'LIMIT_PRCTR%'.
append r_category.
LOOP AT gt_zgfld_prctr
INTO wa_zgfld_prctr
WHERE category IN r_category.
ENDLOOP.
Regards,
Ferry Lianto -
HT5622 hi, i dont use to facetime. could you please help me?
hi, i dont use to facetime. could you please help me?
Hi,
change loginform action to login2 (servlet) for validate user.
<Form name=loginform onsubmit="return checkUserName(this);"
action=login2 method=post>Regards,
Ram. -
When I type into Spotlight the name of a folder on the desktop, it doesn't appear in Spotlight. Could you please tell me how to get it right? Thank you.
And, what do I do if one of the harddisks on my Mini (2010, SL Server) starts misbehaving?Which security software (firewall, anti-virus) do you have?
Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps and allows to delete the Firefox program folder. -
My Ipad can't connect to WiFi. I tried to reset and connect to the wifi network, it will divert me to the IOS page...could you please help? Thanks.
Try a soft reset or turn the device completely off then turn it back on again. Also you can toggle Airplane mode on for about 10 seconds and then turn it off. Sometimes that resets the radio signal inside the device.
A soft reset is basically holding onto the power button and the home button simultaneously together for about 10 seconds or until you see the screen flash and it should go completely black. Afterwards, tun the device back on like normally and see if that fixes the problem. -
HT201210 My Ipod will not work anymore its just the apple showing could you please help me restart
My Ipod will not work anymore its just the apple showing could you please help me restart?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hey my ipad 3 was fully charged. But all of a sudden it got switched off and I cannot switch it back. I connected it to a charger but there was no improvements. I also tried pressing the top button for 30 seconds. Nothing seems to switch it on. Could you please tell me what to do?
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
could someone please tell me how to turn off the email sign-in and password function when I open Itunes on my computer - I don not wish to sign in every time
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Maybe you are looking for
-
Problem connecting N8 to internet via Talk Talk ro...
Hi there Could somebody help me resolve my problem connecting nokia N8 to internet via Talk Talk router with WEP. I have just updated my Nokia's software and now I can use an internet because I'm getting error. I can connect to the router, there is a
-
Registration Page is wrong?
the code on the registration is: date -u +%VLinux|sha256sum|sed 's/\w//g' that always resulting: it should be date -u +%VLinux|sha256sum|sed 's/\W//g'
-
Problem for using query in netbeans
hello friends, i created a database using mysql(5.0.33) in XAMPP. I am using netbeans5.5 and i got the connection to the database successfully and can query well using SQL command. the problem is that i can't use the query to insert the data from the
-
Dynamic images? Help greatly Appriciated!
I've searched the web for quite a while now, and cannot find a definate answer to my problem. I'm trying to dynamically load about 10 images into their own movie clips, all of which will be on the screen at the same time. It needs to be dynamic becau
-
I want to edit a node in flex tree. Editable property of the tree makes all nodes editable based on "SELECT" action . But now based on my custom selection I want to edit a particular node. I thought of custom item renderer and item editor but that ap