Systemd: Use instantiated unit with path

Hello,
I have a systemd unit that should do a commit on a specific path. Since there are more then one path / repos, I want to use an instantiated unit for that (the stuff with @ in the unit name):
~/.config/systemd/user % cat [email protected]
[Unit]
Description=Auto commit for instance.
[Service]
Type = oneshot
Nice = 10
# git returns 1 if there is nothing to commit
SuccessExitStatus=1
WorkingDirectory = %I # also tried %i
ExecStart = /usr/bin/sh -c 'echo %i > wd'
ExecStart = /usr/bin/sh -c 'echo %i >> wd'
ExecStart = /usr/bin/sh -c 'echo `pwd` >> wd'
ExecStart = /usr/bin/git add --all .
ExecStart = /usr/bin/git commit -a -m "Automatic commit."
It seems that using %i or %I as working directory does not work. When I do systemctl --user start git-commit@/home/florian/timer.test.service the journal prints:
Aug 19 18:43:01 asaru systemd[375]: Starting Auto commit for instance....
Aug 19 18:43:01 asaru git[4761]: fatal: Not a git repository (or any of the parent directories): .git
Aug 19 18:43:01 asaru systemd[375]: [email protected]: main process exited, code=exited, status=128/n/a
Aug 19 18:43:01 asaru systemd[375]: Failed to start Auto commit for instance..
Aug 19 18:43:01 asaru systemd[375]: Unit [email protected] entered failed state.
and wd (created in ~) contains
-home-florian-timer.test
-home-florian-timer.test
/home/florian
Any ideas how I can change the working directory to the directory given by the instance name?
Thx!
Last edited by Osiris (2014-08-19 17:01:34)

I've brought that to the systemd mailing list and learned a lot. Indeed it's possible without a wrapper.
http://article.gmane.org/gmane.comp.sys … evel/22154

Similar Messages

Using UPS units with iMac G5 (iSight)

I just bought an APC RS 800 VA UPS for my iMac and now find that it might not be a good idea. There is a post on Macintouch about a report from APC tech saying that the cheaper units are not compatible with iMacs because of the squarewave (vs sinewave) output. If it goes on battery power, it could damage the iMac power supply.
Very strange, because they have the iMac listed on the box the unit shipped in as being ideal for use with this UPS!
Has anyone used the less expensive UPS units with the iMac G5 successfully? Have you had it run on battery power with no noise (hum or buzz) or other anomalies?
Griff

I do not have a UPS from APC, but a generic one from Best Buy which looks like a unit made by CyberPower. It has kicked in several times without any humming or buzzing at all.

Use of organizational unit with org. Object type

Hi,
In What Scenario we will use organizational unit with org. Object type .
Regards,
Peter Son

This technique works by matching codes entered in customizing tables against organizational objects in the organizational plan.
      E.g. A particular Sales Area can be related to an Organizational unit that represents all people in that Sales Area.
     SAP Organizational Objects
     Organizational entities (such as sales group, Distribution Channel, or purchasing organization) are represented by object types in the Business Object Repository.
        The indicator organizational type in their basic data defines
        such object types as SAP Organizational Objects
     For Agent Determination, relationships are created between SAP Organizational Objects (residing in BOR) and the Organizational Management objects.
     The agents are found by tracing these relationships.
Thanks and Regards,
Prabhakar Dharmala

Time Format using text variable with replacement path

Hi Friends,
I've used "Text variable with replacement path" to make the column heading dynamic by replacing the values referring from "0calday"...
everything is working fine, but here it is displaying the time format like
YYYYMMDD (20030101), i want it to be displayed DDMMYYYY (01012003) in the column heading... how to make it possible?
pls waiting for ur inputs, it's an urgent...
Regards,
Pattnaik

Hi Satyakam,
In the text variable properties make sure that in the replacment path you have chosen "Text" to appear date as per user setting . Other wise as in your case it must be set to "Key" which always shows in the format YYYYMMDD.
Hope that helps.
Regards
Mr Kapadia

Using the Ipod with a car stereo head unit interface

I have a Kenwood stereo head unit with a kca-ip500 interface for the ipod in my car so I can control the ipod through the head unit.
I was using my mothers old Ipod Nano with it and it was great because when you turn the car off, the song would pause and then when you start your car again, the song would continue on.
Now that I have my own Ipod, the 6th generation Nano, the ipod does not automatically turn on when i start the car unless it was on not long ago. Meaning the ipod turns itself off eventually and the next day when i drive my car I have to pull the ipod out of the glove box and turn it back on. I did not have to touch my mothers ipod, it just automatically turned on for me.
Any way around this so the ipod automatically turns on when it is fed power???

http://support.apple.com/kb/HT1353
You did not answer my question, was it a firmware update for you iPod or you radio.
Firmware updates for iPods are done through iTunes, did they send instructions on how you were supposed to load it?
What was the filename?

HI everybody i want to ask if you come me in help, i want to draw paths but when i use stroke options with pen or brush settings i loose quality when i zoom in , can someone help me with pen settings???

HI everybody i want to ask if you come me in help, i want to draw paths but when i use stroke options with pen or brush settings i loose quality when i zoom in , can someone help me with pen settings???

The work path is a vector object, and infinitely scalable, but when you stroke it, Photoshop lays pixels on a layer that follow the path. These pixels are raster based and can not be scaled without loosing quality. You do have options. If you want to make the raster layer bigger, transform the work path and stroke it again. Or work at a higher resolution in the first place.
Incidentally, you can't stroke a Path with the Pen, because it is a Vector based tool, and stroking is a raster based function.

Follow path using IP camera with Starter kit 2.0

I am developing a program to follow path using IP camera with Starter kit 2.0. I faced some problems, someone please help.

thiensung92 wrote:
I am developing a program to follow path using IP camera with Starter kit 2.0. I faced some problems, someone please help.
You "faced some problems"...
Without any further information I assume that your computer is unplugged. All fixed. You are welcome!
Obviously we need a LOT more information. We are not going to waste our time guessing when we could be helping others.
Using LabVIEW: 7.1.1, 8.5.1 & 2013

Org Unit with more than one Chief Position

Hi,
we have implemented MSS via the portal using a one-to-one relationship between Org Units and Chief Positions, and we would now like to have multiple Chief positions attached to one Org Unit.
As far as I can tell from the SAP documentation, this should be straightforward, but the results we are getting do not seem correct.
I have an Org Unit that has position 1 and position 2 assigned to it with relationship A/B 012 denoting that they are Chief Positions.
User 1 is holder of position 1 and user 2 is holder of position 2.
Both users have the same security roles.
The views used on the portal are configured using the MSS Object and Data Provider functionality, using the standard ORGEH view, evaluation path for root objects SAP_MANG and evaluation path objects SBES. The checkbox 'Excl. Managers' is ticked.
The problem is this - both users can see all the subordinate employees in the Org Unit when they log on to MSS but user 1 can also see user 2 in his list of employees, which is not correct as user 1 and user 2 are both chiefs. User 2 cannot see user 1 in his list of employees, which we would expect.
The only logic we can see for user 1 being able to see user 2's details is that user 1 must be somehow defined as the 'superior' Chief Position, but we have not defined this as far as we know.
Any ideas as to why this is happening for us?
Many thanks,
Fran.

Hi Fran,
Sounds like you have set up the reporting structures and MSS properly. I do question why two chiefs for one org unit. As you stated, both can see all employees and so both can approve time, give pay increases, etc. without the approval of the other. If this is want you want, then you have set it up properly. Usually, one has to approve the actions of the other, thus, is in a superior relationship. This can be handled by having a higher level new org unit with the higher person as chief and the lower stay as head of the lower org unit which reports to it.
As you have it now, both individuals have the same rights and access. They should both be excluded from iViews if you checked the "Excl. Managers" box. Since, you just recently made one a manager, have you checked for any date dependencies? If the Chief #1 is selecting a view for "Current Year", for example, he would be able to see all persons who reported to him for this year, which includes Chief #2. There are no 'superior chief' designations (except by structure), so without being able to view your configuration, my suggestion is to check all dates for the assignments and relationships vs. dates of the view.

Compatable GPS units with Aperture 3

In the user manual for Aperture 3, there is a link for a list of compatable devices; http://www.apple.com/aperture/specs
There is no list at this link. Does anyone know where I can get this info? I'm looking to use a GPS for upcoming shoots and would like to know what is compatible with Aperture 3. Any help appreciated

Another AMOD user here - I posted a few times about this last week, but I'll borrow from that thread to talk about my experiences with the AMOD and Places.
Had a 3 week shoot in Argentina and decided to try out Aperture 3's new GPS location tagging. So I bought an AMOD 3080 logger and faithfully used it the entire trip. Here's my story, plus a few issues with Places.
First some notes on using the AMOD 3080 - at times it was hard to get to get it logging in Buenos Aires, I assume due to the building density blocking the satellite receptio. Sometimes took 20 minutes to start "flashing", meaning it had acquired the GPS signal and was logging, though it was much speedier out in rural areas.
Charging the three NiMH batteries every night was a bit of a hassle for my charger, which recharges by pairs (I logged about 12 hours a day, so the batteries were usually out of juice by the end of the day). I had a second set of extra batteries, so I would recharge 2 batteries one night and 4 the next. A couple of times I misplaced which of the three was the uncharged battery from the night before, so that was another stupid thing to have to worry about. But be sure to factor in another $30 for a NiMH charger into your total price for the AMOD (plus the weight of the chargers on the road). It might mean a more expensive unit, with a lighter and integrated built-in charger, could suddenly look better. FYI, after returning I found the following unit that charges each AAA battery independently, which would be a better way to go.
http://www.amazon.com/Crosse-Technology-BC-700-Battery-Charger/dp/B000RSOV50/ref =wlit_dpo?ie=UTF8&coliid=I38WY26GTFAAB0&colid=1JZG5Z0U956FB
But other than remembering to switch it on and off, I'd just throw the AMOD in my camera bag throughout the day. One nice thing is no fussy settings beyond on or off - it just pulls time (UTC) and location from the GPS ttransmissions - only option is to choose a 1 second or 5 second log interval.
I ended up with about 30 log tracks from the trip (everytime you switch on the unit, it adds a new track). This was more data than the 128 MB capacity, but I also was able to back up the AMOD to my NEXTODi Extreme 2700 units - I back up my images onto two different Extreme units every night before wiping my CF cards. Near the end I did a "move" onto the NEXTODi which copied the data over and then erased the AMOD.
Regarding the import of the GPS logs into Aperture, the import for the AMOD files is fast and painless. I did sych the cameras to UTC before I left (within half a second), as I thought there would be some sort of auto import. But after the logs are inside Aperture (you select/load them on a map), you have to choose the images you want to place on that particular log, then drop them onto the track at the corresponding time for the main image you have chosen. Even though I set my camera to Argentina time, when I imported my images into Aperture 3 they defaulted to US PST, my home time zone. So i had to readjust all photos to -5 hours, Argentina time, to match the GPS data. So to implement the correct placement, in this case I had to drag the selected photos around the GPS track on the map until it showed 5 hours 0 minutes time difference, then drop the photos onto the map.
Understanding this now, I suspect the Aperture team did it this way (all photos will be offset by the same time difference show when dropping) in case the camera is not set to the exact time used by satellites (UTC). But it still is a bit frustrating that I can only get a minute synch. Further, if you are in pone place for an extended time, you get a tangle of lines on your GPS track - finding the correct one wold be murder. Combined with the problem getting a signal in BsAs, I had to fuss with placing the images much more than I thought I would have to. I solved this by starting a group selection from an image that had a "cleaner" time to find onthe HPS path. Again, not a deal-breaker but a bit more hassle than i expected. All in all, I'd say I spent 5 or 6 hours getting the 7000 images on the correct tracks, at the correct times. Ths included some time for manually placing images that fell outside of the logs.

Combine pallets using Handling unit

Hi experts,
i created a material using pallets and that pallets has 12 piece of materials ,i just want to combine 3 pallets in one handing unit(like container) using handling unit ..how i have to configure........
thanks

Dear Kumar,
You can get through packing related configuration settings and assign those settings in the Material master data.
Please fallow these steps
-->First you create material master data for the packaging material Pallets and Container with VERP material type.
Now you go to IMG then define packing related settings for the packaging material.Menu path is
SPRO>IMG>Logistics execution>Shipping>Packing
-->Define Packaging Material Types as ZPL Pallet ,ZCON Container
-->Define Material Group for Packaging Materials as ZPL Pallet ,ZCON Container.
-->Define Allowed Packaging Materials
ZPL Pallet <>ZCON-- Container.
Now you assign Material Group for Packaging Materials in the material master data Basic Data 1 view.
In finished material master data assign Pallet material group.
In Pallet material master data assign container material group.
Noe you can able to pack as per your requirement in the delivery document.
I hope it will help you,
Regards,
Murali.

Using directory alias with a wanboot installation

I have setup a Jumpstart server and have been using it for a while without issues. Now I want to incorporate wanboot into the process so that I do not need boot servers in each of our subnets. Since the jumpstart directory structure is already in place and I have apache running on the same server, I did not want to have to recreate the whole jumpstart directory structure. So I decided to create an alias in the apache configuration for the jumpstart directory:
root@swamphenxb:/usr/local/apache2/conf> cat httpd.conf
<snip>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
Alias /jumpstart /export/jumpstart
ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock logs/cgisock
</IfModule>
# "/usr/local/apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/usr/local/apache2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
*<Directory /export/jumpstart>*
AllowOverride None
Options All
Order allow,deny
Allow from all
*</Directory>*
The wanboot.conf file is located in /etc/netboot and looks with the following information:
root@swamphenxb:/usr/local/apache2/conf> cat /etc/netboot/wanboot.conf
# Copyright 2004 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
# ident "@(#)wanboot.conf.sample 1.2 04/01/30 SMI"
# wanboot.conf(4): boot configuration file.
# Please consult wanboot.conf(4) for further information. Note that
# this interface is "Evolving" as defined by attributes(5).
# Anything after a '#' is comment. Values may be quoted (e.g. "val").
# <empty> means there is no value, i.e. null. The absence of any
# parameter implies that it takes a default value (<empty> unless
# otherwise specified).
# <url> is of the form http://... or https://...
# The path of the bootstrap file (within htdocs) which is served up
# by wanboot-cgi(bootfile).
boot_file=/jumpstart/wanboot/wanboot.s10_sparc # <absolute pathname>
# These are used by wanboot-cgi(bootfile|bootfs|rootfs) to determine
# whether boot_file or the bootfs is to be sent encrypted/signed, or
# root_file is to be sent signed; the client must be setup with the
# corresponding encryption/signature key(s) (which cannot be auto-
# matically verified).
# If an encryption_type is specified then a signature_type must also
# be specified.
encryption_type= # 3des | aes | <empty>
signature_type= # sha1 | <empty>
# This is used by wanboot-cgi(bootfs) and wanboot to determine whether
# server authentication should be requested during SSL connection
# setup.
server_authentication=no # yes | no
# This is used by wanboot-cgi(bootfs) and wanboot to determine whether
# client authentication should be requested during SSL connection
# setup. If client_authentication is "yes", then server_authentication
# must also be "yes".
client_authentication=no # yes | no
# wanboot-cgi(bootfs) will construct a hosts file which resolves any
# hostnames specified in any of the URLs in the wanboot.conf file,
# plus those found in certificates, etc. The following parameter
# may be used to add additional mappings to the hosts file.
resolve_hosts= # <hostname>[,<hostname>*] | <empty>
# This is used to specify the URL of wanboot-cgi on the server on which
# the root_file exists, and used by wanboot to obtain the root server's
# URL; wanboot substitutes root_file for the pathname part of the URL.
# If the schema is http://... then the root_file will be signed if there
# is a non-empty signature_type. If server_authentication is "yes", the
# schema must be https://...; otherwise it must be http://...
root_server=http://170.12.14.240/cgi-bin/wanboot-cgi # <url> | <empty>
# This is used by wanboot-cgi(rootfs) to locate the path of the
# rootfs image (within htdocs) on the root_server.
root_file=/jumpstart/miniroot/miniroot # <absolute pathname> | <empty>
# This is used by wanboot to determine the URL of the bootserver
# (and whether bootlog traffic should be sent using http or https),
# or whether it should simply be sent to the console.
boot_logger= # <url> | <empty>
# This is used by the system startup scripts. If set, it should
# point to a file that contains name value pairs to be used at
# start up time. For example, this file may be used to provide
# install the values for sysidcfg and jumpscfg.
system_conf=system.conf
I have the client configured to boot from the web server and when I attempt to boot, I get the following message:
{2} ok boot net - install
Boot device: /pci@9,700000/pci@2/network@0 File and args: - install
/pci@9,700000/pci@2/network@0: 1000 Mbps full duplex link up
HTTP: Bad Response: 500 Internal Server Error (boot_file missing)
Boot load failed
I am able to see a listing of all the directories and files including the boot_file in my browser. The permissions for the /etc/netboot directory is:
root@swamphenxb:/etc/netboot> ls -al
total 26
drwx------ 3 daemon other 512 Nov 20 13:09 .
drwxr-xr-x 63 root sys 6144 Nov 2 11:43 ..
drwx------ 3 daemon other 512 Nov 20 13:10 170.12.144.0
-rw------- 1 daemon other 80 Nov 5 17:02 system.conf
-rw------- 1 daemon other 3331 Nov 2 14:07 wanboot.conf
It looks like maybe wanboot does not like the alias I am using, but I want to verify that before I move on to plan B. Thanks.
Chuck Briggs

Long but this is a copy of my lab configuration files for WAN boot
*/etc/ethers*
0:3:ba:16:99:f5 wgls01
0:3:ba:14:b9:71 wgls02
0:3:ba:16:a5:bf wgls03
0:3:ba:5b:c7:5b wgls04
0:3:ba:16:9d:31 wgls05
0:3:ba:e8:65:9 wgls07
0:3:ba:e8:92:a9 wgls08
0:3:ba:16:6b:27 wgls09
0:3:ba:2b:35:c2 wgls10
0:3:ba:5c:b0:5 wgls11*/etc/bootparams*
wgls01 root=wgls06:/js/sparc/Solaris_10_2009-10/Solaris_10/Tools/Boot install=wgtsinf01:/js/sparc/Solaris_10_2009-10 boottype=:in   rootopts=:rsize=8192
wgls02 root=wgls06:/js/sparc/Solaris_9_2005-09/Solaris_9/Tools/Boot   install=wgtsinf01:/js/sparc/Solaris_9_2005-09 boottype=:in   rootopts=:rsize=8192
wgls03 root=wgls06:/js/sparc/Solaris_10_2009-10/Solaris_10/Tools/Boot install=wgtsinf01:/js/sparc/Solaris_10_2009-10 boottype=:in   rootopts=:rsize=8192
wgls04 root=wgls06:/js/sparc/Solaris_10_2009-10/Solaris_10/Tools/Boot install=wgtsinf01:/js/sparc/Solaris_10_2009-10 boottype=:in   rootopts=:rsize=8192
wgls05 root=wgls06:/js/sparc/Solaris_9_2005-09/Solaris_9/Tools/Boot   install=wgtsinf01:/js/sparc/Solaris_9_2005-09 boottype=:in   rootopts=:rsize=8192
wgls06 root=wgls06:/js/sparc/Solaris_10_2009-10/Solaris_10/Tools/Boot install=wgtsinf01:/js/sparc/Solaris_10_2009-10 boottype=:in   rootopts=:rsize=8192
wgls07 root=wgls06:/js/sparc/Solaris_10_2009-10/Solaris_10/Tools/Boot install=wgtsinf01:/js/sparc/Solaris_10_2009-10 boottype=:in   rootopts=:rsize=8192
wgls08 root=wgls06:/js/sparc/Solaris_10_2009-10/Solaris_10/Tools/Boot install=wgtsinf01:/js/sparc/Solaris_10_2009-10 boottype=:in   rootopts=:rsize=8192
wgls09 root=wgls06:/js/sparc/Solaris_8_2004-02/Solaris_8/Tools/Boot   install=wgtsinf01:/js/sparc/Solaris_8_2004-02 boottype=:in   rootopts=:rsize=8192
wgls10 root=wgls06:/js/sparc/Solaris_10_2009-10/Solaris_10/Tools/Boot install=wgtsinf01:/js/sparc/Solaris_10_2009-10 boottype=:in   rootopts=:rsize=8192*/etc/hosts*
# Fake prod subnet
#10.64.86.30     wgls01.nz.thenational.com wgls01
#10.64.86.31     wgls02.nz.thenational.com wgls02
10.64.86.32     wgls03.nz.thenational.com wgls03
10.64.86.33     wgls04.nz.thenational.com wgls04
10.64.86.34     wgls05.nz.thenational.com wgls05
10.64.86.35     wgls06.nz.thenational.com wgls06
10.64.86.36     wgls07.nz.thenational.com wgls07
#10.64.86.37     wgls08.nz.thenational.com wgls08
#10.64.86.42     wgls09.nz.thenational.com wgls09
10.64.86.43     wgls10.nz.thenational.com wgls10Under wgls06:/js/sparc I have many small (~85MB) directories just to load the boot code
# find /js/sparc/Solaris_10_2008-10
/js/sparc/Solaris_10_2008-10
/js/sparc/Solaris_10_2008-10/Solaris_10
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Installers
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Installers/solarisn
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Installers/liveupgrade20
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Installers/.install
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Installers/.install/solarisn.class
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Installers/.install/JRE
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Installers/.install/liveupgrade20.class
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Installers/.install/com
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Installers/.install/com/sun
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Installers/.install/com/sun/launcher
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Installers/.install/com/sun/liveupgrade
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Installers/.install/install_common
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/rm_install_client
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/add_install_client
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot/pkg_db.cpio.bz2
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot/X_small.cpio.bz2
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot/platform
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot/platform/sun4us
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot/platform/sun4us/inetboot
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot/platform/sun4us/wanboot
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot/platform/sun4us/boot_archive
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot/platform/sun4u
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot/platform/sun4u/boot_archive
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot/platform/sun4u/inetboot
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot/platform/sun4u/wanboot
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot/platform/sun4v
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot/platform/sun4v/wanboot
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot/platform/sun4v/inetboot
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot/platform/sun4v/boot_archive
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot/netmask
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot/X.cpio.bz2
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot/lu.platforms
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/Boot/lu.cpio.bz2
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/.wanboot_unneeded_packages
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/setup_install_server
/js/sparc/Solaris_10_2008-10/Solaris_10/Tools/dialAll OS files are located at wgtsinf01:/js/sparc
Firewalls should allow the traffic (TFTP)

JS error while using input fields with type=file on XP SP2

Hi all,
we found a new problem in applications which use input fields with type=file running in a browser on Microsoft Windows XP with SP2.
A typical test layout might look like:
<html>
<head>
    <title>File-Upload</title>
</head>
<body>
    <form action="/cgi-bin/upload.pl" method=post
          enctype="multipart/form-data">
      <input type=file size=50 maxlength=100000 name="file"
             accept="text/*"><br>
      <button onclick="document.forms[0].submit();">Send</button>
    </form>
</body>
</html>
When you add a link without the fully qualified path (for example pic01.jpg instead of c:\pictures\pic01.jpg) and click on the 'Send' button, nothing happens and you get a Javascript error 'Access denied'.
The solution can be found in the MS Knowledge Base article 892442:
http://support.microsoft.com/default.aspx?scid=kb;en-us;892442
We still investigate this issue and will inform you about the further proceeding.
Regards,
Rainer

Hi Yepin Jin,
I am facing the same issue did you solved it?
Regards,
Orlando Covault

Using a real file path to include a JSP using RequestDispatcher

Hi,
I am trying to figure out how to use RequestDispatcher inside a servlet to include a jsp page using a real file path instead of a context path. So for example I would want to do something like...
RequestDispatcher rd = this.getServletContext().getRequestDispatcher("c:/tomcat/conf/think.jsp");
Is this possible? tomcat is complaining that the path does not start with a "/"
From a higher level I am trying to setup a solution where all of my web applications can share a set of global jsp pages and other resources. I know the easiest solution would be to put everything into one web application but this does not make sense in my situation because I have differnet web applications for different companies on the same server. Any help would be greatly appreciated. - krebsnet

First of all...
My test environment is Tomcat 4.1.24 and it runs on port 80 as my webserver as well.
I can place the .jsp (or .html) in the shared folder. Not in the lib or class folders but right in the shared folder. I can then call it from multiple contexts without using the context path. Just tested it a minute ago. For example I have test.jsp in the shared folder and loaded it from two separate contexts (one named /demo and one named /inetapps) by calling Load test. It loaded in both of them and neither contain a test.jsp file.

Path palette: What's wrong with "path share" and "path exclude"?

Hi everybody. First of all: Sorry for my english, but I hope someone can understanding me.
Well, I want to work with Fireworks in the future because I think that this programm keep in some situation more efficience as Photoshop... So I was trying to learn how this programm is working.
Since some days I make some experiments with Path's, because I like to work with Illustrator as well. But now, I am still going crazy because I don't understanding 2 options. I don't know the english names but In the path palette does they have this Icons:
The first option (Pfade teilen) is "path share" and the second one (Pfade ausschließen) is free translate "path exclude"
My question is: When I can use this 2 Options? I really did everything but nothing was working

Thanks for posting about this issue! I've taken a look at the "Combine Paths" operations in the Paths panel in both Fireworks CS6 and CS5 on my Mac, and noticed several bugs. Between you and I, here's a summary of what we've found:
Fireworks CS6, Version 12.0.0.236, WIN, 7, 64 Bit, SP 1
Exclude Paths - Does not work.
Fireworks CS6, Version 12.0.0.236, Mac OS 10.6.8 (Snow Leopard)
Divide Paths - No effect on rectangles.
Exclude Paths - Requires 2 clicks for rectangles - one to ungroup rectangles and another to apply path operation.
Fireworks CS5, Version 11.1.0.205, Mac OS 10.6.8 (Snow Leopard)
Divide Paths - Works like Exclude Paths.
Undo - Deletes previous unrelated non-path operation. For example:
Draw two ellipses.
Draw a rectangle.
Select two ellipses and apply Combine Paths operation.
Undo (Command-Z).
The rectangle disappears!
You can submit a bug report to Adobe about the "Exclude Paths" issue, and include the URL for this discussion within your report:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
In the meantime, I'm going to send an e-mail to the developer about these issues. I know that he's working on a fix for another problem with this panel and planning on releasing a fix at some point, so hopefully these issues can get fixed as well.
Again, thanks for being so persistent. It is challenging to understand your writing at times; however, the animated GIF was very helpful—and very well done. Have you tried composing your posts in your native language and then using something like Google Translate to convert it to English? I don't know if the results would be better; it's just an idea.

Adding a specific org unit with a user id.

Hi SAP Master,
How can I add a specific organization Unit with a particular User Id, i.e when ever that user id logs in into system and create a transaction the org. unit assigned with him determined automatically.
And one more query, how can we send a org. unit for approval?
Thanks and Regards
Rahul
Edited by: Rahul07 on Jun 10, 2011 10:18 AM

Hi Rahul,
We don't assign the Organization unit to the user in the SU01. In SU01 we assing the PFCG roles and authorization related stuff.
Rather we create the Organization model, assign positions and then assign the user to the relevant position under the required organization unit using the tcode "PPOMA_CRM".
When you setup the Organization determination procedure, then automatically while creating the transaction, the Organization Unit of the person who is creating the Transaction gets determined.
rgrds,
Randhir

Systemd: Use instantiated unit with path

Similar Messages

Maybe you are looking for