T Code CR11 & CR15 usage
Hi All,
Can anybody explain me the use of Capacity of work center in TCode CR11 and the use of work center capacity evaluation in TCode CR15.
My Actual requirement is like this.
I have a Maintenance work center in which 10 employees assigned.
I want to assign particullar employee to an operation in the order.
I want to evaluate the performance of each employee in that work center in a specified time.
How to do this. Plz explain.....
Hiii
Maven CR11 is used to create capacity. This function is same as you maintain it while creating Work center. Only difference is while creating it for Workcenter capacity is having link with work center. When you create it seperately, i do not have any idea whether it can be assigned to workcenter or not. I need to check it.
Transaction code CR15 is used for evaluation of capacity. You can use capacity evaluations to analyze capacity loads in your company. You can adjust the analyses for each user according to the planning level, planning horizon and the area of responsibility. Available capacities and capacity requirements can be selected according to various criteria and cumulated using any period split you choose.
You can use work center hierarchies to cumulate the available capacities of production work centers and their capacity requirements to superior planning work centers.
To assign a person to order operation just go to operation tab view of the order Select the order operation & click on internal button you will be on internal tab view for the order. There you can assign the person number.
You have standard time for the operation that you define at the time of the defining or planning the tasklist. You have actual time for the operation from AFRU table. You can develop report to compair these two times & get the performance of the person who is working on order operation & by colloecting all timings for all operation you can decide what efficient that person is.
I hope this will anwer your question. let me know if further you need any more information.
Regards
Makarand Gurjar
Similar Messages
-
ISO code 3 character - usage in SAP
Hello experts,
There is field "ISO code 3 character" which can be customised under t-code : OY01 [alternatively - SAP NetWeaver >> General Settings >> Set Countries >> Define Countries in mySAP Systems ('New Entries')]
It possibly can be entered in transaction OY07 also.
Can anyone tell about its usage in SAP? Once this is entered in customisation, where is this field available for entry/or where does this field show up? (e.g. once document type is configured, it is available for entry in FB01 header data/once trading partner is configured, it is available for entry in vendor master data)
Thanks and regards,
Sudip LahiriHi,
refer below thread might be useful
[Problem with <SOURCE_FIELDS> in BI 7.0;
Thank,s -
Block company code for any usage
Hi
how to find the compnay code or Plant blocked for any usage like block for transactions like master data creation or any positing like good receiot etc. Please confirm.
MadhavanYou can also block all posting periods, trough OB52 but it would depend in the Posting Period Variant of the company
Regards
Jose -
Problem in Compilation of a c++ code due to usage of regexec in Solaris.
HI all,
I am using regexec as "err=regexec(®exBuffer, m_data, maxMatches, regexMatches, eFlags)"
i am having a problem running this code in Solaris although i works fine in windows.
When i try to display indivial values of the structure regexec, i get the following compilation error:
"common/src/fact/regexp.cpp", line 88: Error: allocated is not a member of boost::regex_tA.
"common/src/fact/regexp.cpp", line 89: Error: buffer is not a member of boost::regex_tA.
"common/src/fact/regexp.cpp", line 90: Error: can_be_null is not a member of boost::regex_tA.
"common/src/fact/regexp.cpp", line 91: Error: fastmap is not a member of boost::regex_tA.
"common/src/fact/regexp.cpp", line 92: Error: Unexpected ")" -- Check for matching parenthesis.
"common/src/fact/regexp.cpp", line 92: Error: Badly formed expression.
"common/src/fact/regexp.cpp", line 93: Error: newline_anchor is not a member of boost::regex_tA.
"common/src/fact/regexp.cpp", line 94: Error: no_sub is not a member of boost::regex_tA.
"common/src/fact/regexp.cpp", line 95: Error: not_bol is not a member of boost::regex_tA.
"common/src/fact/regexp.cpp", line 96: Error: not_eol is not a member of boost::regex_tA.
"common/src/fact/regexp.cpp", line 98: Error: regs_allocated is not a member of boost::regex_tA.
"common/src/fact/regexp.cpp", line 99: Error: syntax is not a member of boost::regex_tA.
"common/src/fact/regexp.cpp", line 100: Error: translate is not a member of boost::regex_tA.
"common/src/fact/regexp.cpp", line 101: Error: used is not a member of boost::regex_tA.
Help!!!
Regards
Ajithi,
If the data has been archieved then there is no tool to get the archieve data back in BW. So I suggest to investigate further.
Thanks -
Untidy HTML code and strange usage of Tags.
RH8 HTML
I've been noticing over pretty much all of my topics that the HTML is quite messy, and various types of tags are being used.
Best example is the use of both the <span style="font-weight: bold;"> and the very standard <b> tag being used to both achieve bold text, the same is occuring for italic text.
sometimes this is happening at the same time, example: <b><span style="font-weight: bold;">Form Builder</span></b>
I'm using either CTRL+B or the Bold icon in RH to set off the bold text, and it seems to pick whichever tag it wants at random.
does this happen for everyone....is there anyway to lcean this up automatically somehow....I'm not looking to edit this all manually, and if its not broken I'm not going to try, but I like things to be clean, and this is not clean at all.
Thanks,
NickHi,
<b>,<i>,<small>, etc are not (yet) decaprated in HTML and XHTML F,T,S. See http://www.w3schools.com/tags/tag_font_style.asp, although I think that it's sensible to avoid these tags altogeher.
My solution to this untide HTML is avoid inline styling and above mentiond tags altogeher. Personally, I use span classes for every use, even though separate uses have the same styling, such as field names, page names, paramaters, etc. By creating a separate class for every use, you insure that you can easily change the style of a specific type.
This means ofcourse a rather large style sheet and you cannot use the styling options in RoboHelp itself. But once you're used to that, it actually saves you a lot of time. I've had to change some specific styles more than once and it's much easier to to change a style sheet, than change hundreds of topics with a Find and Replace or by hand.
Greet,
Willam -
Z- T code usage log table.
hi All,
I am looking for T-code or program usage log standard table to fulfill my requirement.
Like I can get these values username, run date, run time etc.
-Thanks
AmitHello Amit,
although it was not specifically meant for this purpose, transaction STAD is an alternative how you can check the usage of a Z-transaction.
Usage of transaction STAD is:
enter the starting date / time
enter the length which indicates how long the server should be analysed from the starting date / time
in field "Transaction" enter the transaction name you need to check
simply press <enter>
Transaction STAD contains a huge amount of information about program statistics, so the information won't be kept here for long. However, the amount of storable program statistics should be raised only with care, as it can give a huge additional load on the server.
Best regards,
Laszlo -
We need to include concuurent usage metering code to our Forte
application to limit the number of concurrent users which may start
our application to the number of run-time licences. The metering code
should allow usage to exceed the number of run-time licences provided
that such excess generate conspicuous user notifications of the need
to purchase additional Forte run-time licences.
Has anyone else implemented this sort of usage metering code before?
If so, how did you implement it?
Thank you in advance.
Regards,
==
Henry Bissell
CGU
Melbourne, VIC
Australia
03-9601-8985
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>I have no other explanation, though. It seems the data has something to do.
Thanks again.
Gabriel.
Originally Posted by AndersG
Gabrielf60,
> It seems I've found the culprit. The date was wrong and I believe it
> affects
> somehow the certificates or something related to the PKI. Could I be
> right?
>
> Since I corrected the date no abends appeared again.
Well, certificates have a best-before date, but I have never seen NLDAP
crash because of that. Glad you got it sorted though.
Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Have an idea for a product enhancement? Please visit:
http://www.novell.com/rms -
Bar Code Sample Example for Usage in Smarform
Dear Experts,
We are trying to print the barcode on the Manufacturing Sheet and should contain the PART code, Serial Number and the Mfg. Date embeded in the bar code.
Can somebody share the sample Bar Code Example for Usage in Smarforms.
I never got a chance to work on such development. We are getting different answers from our development partner and sould like to excersize this on my own.
Appreciate your help
Regards,
RavatiHi Ravati, It's simple!!
Follow the example below for printing barcode in smartform .
There are some SAP standard barcodes(for ex.ARTNR,AUFNR ..etc) and also we can create our own barcode for it by using transaction code SE73.
1. Steps for using existing barcode in Smartform
For Printing Barcode in Smartform, you need to have the style with barcode active in it. So define new style where the standard settings should define the barcode that you want to use in the smartform.
For example, For product information display I use the Style as ZMFG_BARCODE.
Create paragraph & character format as "P1 - Product Description". In standard setting of character format P1, select the standard or custom defined barcode. This will ensure the printing of Product Information in Barcode format.
Now Create Smartform with output options specifying style name which you have created with Barcode active.
Complete your smartform coding, and when you want to display the information in barcode, concatinate all the required information and enclose that text in character format like,
for Product Code assuming the technical field name as mara-matnr, it should be printed as below:
<P1>&mara-matnr&</>
2. Steps to create new barcode using SE73 - SAPScript Font Maintenance.
In SE73, Select radio button "System barcode" to create new barcode. While creation of this barcode, you have to describe the new barcode, select technology new, barcode symbology and barcode alignment.
You may also chage the barcode parameter if required.
Now follow the same steps to implement this new barcode.
Hope this will help you.
Regards,
Pravin -
Item category usage - how to configure
My client requirements are
Need a new Usage code (item category usage)
description = "Included with System "
The users will use this to add items to the sales order as Free Goods but the revenue for the items is already embedded in the main item
How to configure this?
Also are there any additional updates required to allow the usage code to be used ?
Thank you!Hi
Usage indicator is something else. Just go through F1 help and see for what purpose we can use this field. What you are looking for is free goods configuration. This has been discussed so many times. Search with thext free goods and see if you find something. If you have some other requirement then come again with more explanation.
Thank$ -
PP - QM: Reversal of the usage decision
Hi Gurus,
We have completed Result Recording using QE51N transaction and Usage decision using QA11. It has posted a stock from QI to Unrestricted use. Now I want to take it back from Unrestricted use to QI. This needs reversal of usage decision (What I think).
Can you suggest me the proper way of performing the said transaction?
I will really appreciate your concern.
Thanks
ShivR/3 note no. 175842 14.12.2001 Page 1
Number 0175842
Version 0021 from 29.11.2001
Status Released for customer
Set by SAP AG on 03.12.2001
Language EN
Short text Inspection lot: Reversal of goods movements from UD
Administrator SAP AG
Component QM-IM-UD Inspection Lot Completion
Long text
Symptom
Goods movements, which were created from the transactions of the usage
decision, can no longer be reversed.
Additional key words
QA11, QA12, QA14, MBST, MF41
Inspection lot, usage decision, goods movements, reversal, material
document
Cause and preconditions
Presently, the function is not provided in the standard system.
Solution
The function is not provided in the standard system up to and including
Release 4.6C.
When you do this bear the following in mind:
1. Using the attached program corrections, stock transfer postings can
be reset for the usage decision.If it is possible to post this
document in the stock management, the inspection lot is also
corrected and the Quality Management Information System is if
necessary updated.After the reset has been successfully carried out,
the inspection lot, related to the stocks, has the status before the
first stock credit entry.The usage decision is not reset.If, after
the usage decision, further transfer postings are carried out in the
stock management which lead to the usage decision transfer postings
not being able to be reset due to missing availability, these
postings must be reversed first.
2. The goods movement is carried out in each case with the reversal
movement type (document neutral reversal).The original documents are
not reversed related to the document.This may lead to deviations in
the accounting caused by valuation.
3. Resetting postings for materials requiring serial numbers is not
supported.
4. With this correction program, you cannot reverse goods movements for
inpection lots for handling units (HU).
5. Batch status changes which have possibly been carried out are not
cancelled.
6. Batches which have been created in the usage decision during a
transfer posting are not deleted.The classification of these batches
is not changed either.
Page 2
7. Within the adjustment posting, in Release 4.x, the reference records
are also adjusted between the material document and inspection
lot.This can possibly lead to an incorrect description of the
reference type when displaying material documents for the inspection
lot.In Release 3.x, the reference records are deleted in order to
make sure that individual documents cannot be cancelled several
times.
8. The program does not contain any own authorization checks and should
be used with utmost care and ONLY after a successful test. The
program should ONLY be applied in exceptions and should not be part
of the standard procedure.
9. The logic implemented in the program for the generation of material
documents or for the update of inspection lot quantities and
inspection lot status should under no circumstances be be changed as
this might lead to inconsistent data. Since this is a program that is
not contained in the standard system, problems that are created as a
result of the program application can be dealt with as problems that
have arisen as a result of a customer modification.
To implement the program, proceed as follows:
1. Create an executable program and copy the attached source code.Then
maintain the text for selection parameter PRUEFLOS by transferring
the Dictionary text.
2. If you a use a Release < 4.6, you must create the function group
ZQMB. In this function group, you must create function module
'ZQMB_QAMB_CANCEL'. Flag the function module as an update function
module (Start immediately) and include table interface parameter
'I_QAMB_TAB' (type specification LIKE, reference structure QAMB).
Afterwards you must include exception 'ERROR_DURING_UPDATE' and
implement the attached source code.
3. Use Transaction OMJJ to enter further entries in level 'Allowed
transactions' (table T158B) for transaction code 'QA11' (Record Usage
Decision).The movement types for which these entries must be created
are derived from the system settings for the goods movements for the
usage decision (table TQ07M):The reversal movement type must be
determined for every movement type that is entered in table TQ07M
with the key VMENGE01 - VMENGE09 and the corresponding entry must be
included in the above-mentioned table.You can use table T156N for
determining the reversal movement type:You can determine the reversal
movement type by entering the movement type (BWART) and function code
(FCODE) ST (BWART_NEXT).For missing entries, the system generates
error M7096 'Goods movement not possible with mvmt type &'.
Source code corrections
Page 3
Valid releases
R/3 Standard 46C - 46D
46A - 46B
45A - 45B
40A - 40B
30F - 31I
Other components
QM-IM Quality Inspection
Reference to related notes
Number Short text
0033924 Cancelling usage decisions
0048815 Checking possible inconsistencies between MM and QM
Page 4
Assigned correction instructions
$$----
$$
$ Correction Instr. : 0120024545 0000111772 $
$ Software Component : SAP_APPL SAP Application $
*$----
$*
$ Validity : 40A SAPKH40A01 - SAPKH40A25 $
$ : 40B All Patches $
$ : 45A All Patches $
$ : 45B All Patches $
*$----
$*
$ Changes/Objects Not Contained in Standard SAP System $
$$----
$$
*& Object FUNC ZQMB_QAMB_CANCEL
*& Object Header FUGR ZQMB
*& FUNCTION ZQMB_QAMB_CANCEL
*>>>> START OF INSERTION <<<<
UPDATE QAMB FROM TABLE I_QAMB_TAB.
IF NOT SY-SUBRC IS INITIAL.
RAISE ERROR_DURING_UPDATE.
ENDIF.
*>>>> END OF INSERTION <<<<<<
*& Object REPS RQEVAC50
*& Object Header PROG RQEVAC50
*& REPORT RQEVAC50
*>>>> START OF INSERTION <<<<
REPORT RQEVAC50 MESSAGE-ID QA.
TYPES:
T_QAMB_TAB LIKE QAMB OCCURS 0,
T_MKPF_TAB LIKE MKPF OCCURS 0,
T_MSEG_TAB LIKE MSEG OCCURS 0.
PARAMETERS:
PRUEFLOS LIKE QALS-PRUEFLOS OBLIGATORY MEMORY ID QLS.
DATA:
G_MSGV1 LIKE SY-MSGV1,
G_QALS LIKE QALS,
G_QALS_LEISTE LIKE QALS,
G_QAMB_TAB TYPE T_QAMB_TAB,
G_QAMB_VB_TAB TYPE T_QAMB_TAB,
G_MKPF_TAB TYPE T_MKPF_TAB,
G_MSEG_TAB TYPE T_MSEG_TAB,
G_SUBRC LIKE SY-SUBRC.
START-OF-SELECTION.
Page 5
PERFORM ENQUEUE_QALS USING PRUEFLOS
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM READ_QALS USING PRUEFLOS
G_QALS
G_QALS_LEISTE
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID 'QA' TYPE 'S' NUMBER '102'
WITH PRUEFLOS.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM CHECK_LOT USING G_QALS
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
CASE G_SUBRC.
WHEN 128.
G_MSGV1 = 'Material & is serialized'.
REPLACE '&' WITH G_QALS-MATNR INTO G_MSGV1.
WHEN 64.
G_MSGV1 = 'Lot & is not stock relevant'.
WHEN 32.
G_MSGV1 = 'Lot &: No stock transferred'.
WHEN 16.
G_MSGV1 = 'Lot & is cancelled'.
WHEN 8.
G_MSGV1 = 'Lot & is archived'.
WHEN 4.
G_MSGV1 = 'Lot & is blocked'.
WHEN 2.
G_MSGV1 = 'Lot & is HU managed'.
ENDCASE.
REPLACE '&' WITH PRUEFLOS INTO G_MSGV1.
MESSAGE ID '00' TYPE 'S' NUMBER '208'
WITH G_MSGV1.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM READ_QAMB USING G_QALS
G_QAMB_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID 'QA' TYPE 'S' NUMBER '068'
WITH PRUEFLOS.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM READ_MKPF USING G_QAMB_TAB
G_MKPF_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
Page 6
MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM CHECK_MKPF USING G_MKPF_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID 'QA' TYPE 'S' NUMBER '068'
WITH PRUEFLOS.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM READ_MSEG USING G_MKPF_TAB
G_MSEG_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM CHECK_MSEG USING G_MSEG_TAB
G_QAMB_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID 'QA' TYPE 'S' NUMBER '068'
WITH PRUEFLOS.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM CREATE_GOODS_MOVEMENT USING G_QALS
G_MSEG_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID 'QA' TYPE 'S' NUMBER '068'
WITH PRUEFLOS.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
PERFORM POST_GOODS_MOVEMENT.
PERFORM POST_DATA USING G_QALS
G_QALS_LEISTE
G_QAMB_TAB
G_QAMB_VB_TAB
G_SUBRC.
IF NOT G_SUBRC IS INITIAL.
MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ELSE.
COMMIT WORK AND WAIT.
G_MSGV1 = 'inspection lot &'.
REPLACE '&' WITH PRUEFLOS INTO G_MSGV1.
MESSAGE ID '00' TYPE 'S' NUMBER '368'
Page 7
WITH 'Stock posting reversed for ' G_MSGV1.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
Form ENQUEUE_QALS *
Los sperren *
FORM ENQUEUE_QALS USING P_PRUEFLOS LIKE QALS-PRUEFLOS
P_SUBRC LIKE SY-SUBRC.
CLEAR: P_SUBRC.
CALL FUNCTION 'ENQUEUE_EQQALS1'
EXPORTING
PRUEFLOS = P_PRUEFLOS
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3.
P_SUBRC = SY-SUBRC.
ENDFORM. " ENQUEUE_QALS
Form READ_QALS *
Prüflos lesen *
FORM READ_QALS USING P_PRUEFLOS LIKE QALS-PRUEFLOS
P_QALS LIKE QALS
P_QALS_LEISTE LIKE QALS
P_SUBRC LIKE SY-SUBRC.
CLEAR: P_SUBRC.
CALL FUNCTION 'QPSE_LOT_READ'
EXPORTING
I_PRUEFLOS = P_PRUEFLOS
I_RESET_LOT = 'X'
IMPORTING
E_QALS = P_QALS
EXCEPTIONS
NO_LOT = 1.
P_SUBRC = SY-SUBRC.
IF P_SUBRC IS INITIAL.
P_QALS_LEISTE = P_QALS.
ELSE.
CLEAR: P_QALS,
P_QALS_LEISTE.
ENDIF.
ENDFORM. " READ_QALS
Form CHECK_LOT *
Page 8
Prüflos prüfen *
FORM CHECK_LOT USING P_QALS LIKE QALS
P_SUBRC LIKE SY-SUBRC.
DATA:
L_STAT LIKE JSTAT,
L_STAT_TAB LIKE JSTAT OCCURS 0 WITH HEADER LINE.
P_SUBRC = 128.
*/Serialized Material
IF NOT P_QALS-SERNP IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 64.
ENDIF.
*/BERF
CALL FUNCTION 'STATUS_CHECK'
EXPORTING
OBJNR = P_QALS-OBJNR
STATUS = 'I0203'
EXCEPTIONS
STATUS_NOT_ACTIVE = 2.
IF NOT SY-SUBRC IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 32.
ENDIF.
*/BTEI & BEND
CLEAR L_STAT. CLEAR L_STAT_TAB. REFRESH L_STAT_TAB.
L_STAT-STAT = 'I0219'. APPEND L_STAT TO L_STAT_TAB. "BTEI
L_STAT-STAT = 'I0220'. APPEND L_STAT TO L_STAT_TAB. "BEND
CALL FUNCTION 'STATUS_OBJECT_CHECK_MULTI'
EXPORTING
OBJNR = P_QALS-OBJNR
TABLES
STATUS_CHECK = L_STAT_TAB.
IF L_STAT_TAB[] IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 16.
ENDIF.
*/LSTO & LSTV
CLEAR L_STAT. CLEAR L_STAT_TAB. REFRESH L_STAT_TAB.
L_STAT-STAT = 'I0224'. APPEND L_STAT TO L_STAT_TAB. "LSTO
L_STAT-STAT = 'I0232'. APPEND L_STAT TO L_STAT_TAB. "LSTV
CALL FUNCTION 'STATUS_OBJECT_CHECK_MULTI'
EXPORTING
Page 9
OBJNR = P_QALS-OBJNR
TABLES
STATUS_CHECK = L_STAT_TAB.
IF NOT L_STAT_TAB[] IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 8.
ENDIF.
*/ARSP & ARCH & REO1 & REO2 & REO3
CLEAR L_STAT. CLEAR L_STAT_TAB. REFRESH L_STAT_TAB.
L_STAT-STAT = 'I0225'. APPEND L_STAT TO L_STAT_TAB. "ARSP
L_STAT-STAT = 'I0226'. APPEND L_STAT TO L_STAT_TAB. "ARCH
L_STAT-STAT = 'I0227'. APPEND L_STAT TO L_STAT_TAB. "REO3
L_STAT-STAT = 'I0228'. APPEND L_STAT TO L_STAT_TAB. "REO2
L_STAT-STAT = 'I0229'. APPEND L_STAT TO L_STAT_TAB. "REO1
CALL FUNCTION 'STATUS_OBJECT_CHECK_MULTI'
EXPORTING
OBJNR = P_QALS-OBJNR
TABLES
STATUS_CHECK = L_STAT_TAB.
IF NOT L_STAT_TAB[] IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 4.
ENDIF.
*/SPER
CALL FUNCTION 'STATUS_CHECK'
EXPORTING
OBJNR = P_QALS-OBJNR
STATUS = 'I0043'
EXCEPTIONS
STATUS_NOT_ACTIVE = 2.
IF SY-SUBRC IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 2.
ENDIF.
*/HUM
CALL FUNCTION 'STATUS_CHECK'
EXPORTING
OBJNR = P_QALS-OBJNR
STATUS = 'I0443'
EXCEPTIONS
STATUS_NOT_ACTIVE = 2.
IF SY-SUBRC IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 0.
ENDIF.
Page 10
ENDFORM. " CHECK_LOT
Form READ_QAMB *
QAMBs lesen *
FORM READ_QAMB USING P_QALS LIKE QALS
P_QAMB_TAB TYPE T_QAMB_TAB
P_SUBRC LIKE SY-SUBRC.
CLEAR: P_SUBRC.
SELECT * FROM QAMB INTO TABLE P_QAMB_TAB
WHERE PRUEFLOS = P_QALS-PRUEFLOS
AND TYP = '3'.
P_SUBRC = SY-SUBRC.
ENDFORM. " READ_QAMB
Form READ_MKPF *
Read material document header *
FORM READ_MKPF USING P_QAMB_TAB TYPE T_QAMB_TAB
P_MKPF_TAB TYPE T_MKPF_TAB
P_SUBRC LIKE SY-SUBRC.
DATA:
BEGIN OF L_MKPF_KEY_TAB OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
MJAHR LIKE MKPF-MJAHR,
END OF L_MKPF_KEY_TAB.
DATA:
L_QAMB LIKE QAMB,
L_MKPF LIKE MKPF,
L_TRTYP LIKE T158-TRTYP VALUE 'A',
L_VGART LIKE T158-VGART VALUE 'WQ',
L_XEXIT LIKE QM00-QKZ.
P_SUBRC = 4.
LOOP AT P_QAMB_TAB INTO L_QAMB.
L_MKPF_KEY_TAB-MBLNR = L_QAMB-MBLNR.
L_MKPF_KEY_TAB-MJAHR = L_QAMB-MJAHR.
COLLECT L_MKPF_KEY_TAB.
ENDLOOP.
LOOP AT L_MKPF_KEY_TAB.
CALL FUNCTION 'ENQUEUE_EMMKPF'
EXPORTING
MBLNR = L_MKPF_KEY_TAB-MBLNR
MJAHR = L_MKPF_KEY_TAB-MJAHR
EXCEPTIONS
FOREIGN_LOCK = 1
Page 11
SYSTEM_FAILURE = 2
OTHERS = 3.
IF NOT SY-SUBRC IS INITIAL.
L_XEXIT = 'X'.
EXIT.
ENDIF.
CLEAR: L_MKPF.
CALL FUNCTION 'MB_READ_MATERIAL_HEADER'
EXPORTING
MBLNR = L_MKPF_KEY_TAB-MBLNR
MJAHR = L_MKPF_KEY_TAB-MJAHR
TRTYP = L_TRTYP
VGART = L_VGART
IMPORTING
KOPF = L_MKPF
EXCEPTIONS
ERROR_MESSAGE = 1.
IF NOT SY-SUBRC IS INITIAL.
L_XEXIT = 'X'.
EXIT.
ELSE.
APPEND L_MKPF TO P_MKPF_TAB.
ENDIF.
ENDLOOP.
IF NOT L_XEXIT IS INITIAL.
EXIT.
ELSE.
P_SUBRC = 0.
ENDIF.
ENDFORM. " READ_MKPF
Form READ_MSEG *
MSEGs lesen *
FORM READ_MSEG USING P_MKPF_TAB TYPE T_MKPF_TAB
P_MSEG_TAB TYPE T_MSEG_TAB
P_SUBRC LIKE SY-SUBRC.
DATA:
L_MKPF LIKE MKPF,
L_MSEG_TAB LIKE MSEG OCCURS 0 WITH HEADER LINE,
L_TRTYP LIKE T158-TRTYP VALUE 'A',
L_XEXIT LIKE QM00-QKZ.
P_SUBRC = 4.
LOOP AT P_MKPF_TAB INTO L_MKPF.
CLEAR: L_MSEG_TAB. REFRESH: L_MSEG_TAB.
CALL FUNCTION 'MB_READ_MATERIAL_POSITION'
EXPORTING
Page 12
MBLNR = L_MKPF-MBLNR
MJAHR = L_MKPF-MJAHR
TRTYP = L_TRTYP
*/ ZEILB = P_ZEILE
*/ ZEILE = P_ZEILE
TABLES
SEQTAB = L_MSEG_TAB
EXCEPTIONS
ERROR_MESSAGE = 1.
IF NOT SY-SUBRC IS INITIAL.
L_XEXIT = 'X'.
EXIT.
ELSE.
APPEND LINES OF L_MSEG_TAB TO P_MSEG_TAB.
ENDIF.
ENDLOOP.
IF NOT L_XEXIT IS INITIAL.
EXIT.
ELSE.
*/ XAuto-Zeilen und Chargenzustandsänderung werden gelöscht
DELETE P_MSEG_TAB WHERE XAUTO NE SPACE
OR BWART EQ '341'
OR BWART EQ '342'.
P_SUBRC = 0.
ENDIF.
ENDFORM. " READ_MSEG
Form CREATE_GOODS_MOVEMENT *
Warenbewegung anlegen *
FORM CREATE_GOODS_MOVEMENT USING P_QALS LIKE QALS
P_MSEG_TAB TYPE T_MSEG_TAB
P_SUBRC LIKE SY-SUBRC.
DATA:
L_LMENGEZUB LIKE QALS-LMENGEZUB,
L_LMENGEGEB LIKE QALS-LMENGEZUB,
L_MBQSS LIKE MBQSS,
L_IMKPF LIKE IMKPF,
L_IMSEG LIKE IMSEG,
L_IMSEG_TAB LIKE IMSEG OCCURS 1,
L_EMKPF LIKE EMKPF,
L_EMSEG LIKE EMSEG,
L_EMSEG_TAB LIKE EMSEG OCCURS 1,
L_MSEG LIKE MSEG,
L_MSEG_TAB LIKE MSEG OCCURS 1,
L_TCODE LIKE SY-TCODE VALUE 'QA11',
L_TABIX LIKE SY-TABIX VALUE 1,
L_XSTBW LIKE T156-XSTBW.
CLEAR: P_SUBRC.
Page 13
*/QAMB initialisieren
CALL FUNCTION 'QAMB_REFRESH_DATA'.
*/Kopf füllen
L_IMKPF-BLDAT = SY-DATLO.
L_IMKPF-BUDAT = SY-DATLO.
L_IMKPF-BKTXT = 'Cancellation of QM UD postings'.
*/Ursprüngliche zu buchende Menge merken + inkrementieren
L_LMENGEZUB = P_QALS-LMENGEZUB.
L_LMENGEGEB = P_QALS-LMENGE01
+ P_QALS-LMENGE02
+ P_QALS-LMENGE03
+ P_QALS-LMENGE04
+ P_QALS-LMENGE05
+ P_QALS-LMENGE06
+ P_QALS-LMENGE07
+ P_QALS-LMENGE08
+ P_QALS-LMENGE09.
*/Zeilen aufbauen
L_MSEG_TAB[] = P_MSEG_TAB[].
LOOP AT L_MSEG_TAB INTO L_MSEG.
MOVE-CORRESPONDING L_MSEG TO L_MBQSS.
MOVE-CORRESPONDING L_MBQSS TO L_IMSEG.
*/ Referenzbeleg übergeben, falls Bestellnummer gefüllt
IF NOT L_MSEG-EBELN IS INITIAL.
MOVE: L_MSEG-LFBNR TO L_IMSEG-LFBNR,
L_MSEG-LFBJA TO L_IMSEG-LFBJA,
L_MSEG-LFPOS TO L_IMSEG-LFPOS.
ENDIF.
MOVE L_MSEG-KDAUF TO L_IMSEG-KDAUF.
MOVE L_MSEG-KDPOS TO L_IMSEG-KDPOS.
MOVE L_MSEG-PS_PSP_PNR TO L_IMSEG-PS_PSP_PNR.
*/ Umlagerungsfelder setzen
MOVE:
L_MSEG-UMMAT TO L_IMSEG-UMMAT,
L_MSEG-UMWRK TO L_IMSEG-UMWRK,
L_MSEG-UMLGO TO L_IMSEG-UMLGO,
L_MSEG-UMCHA TO L_IMSEG-UMCHA.
*/ Storno-Beleg setzen
MOVE: L_MSEG-MJAHR TO L_IMSEG-SJAHR,
L_MSEG-MBLNR TO L_IMSEG-SMBLN,
L_MSEG-ZEILE TO L_IMSEG-SMBLP.
*/ Falsch gefüllte Felder initialisieren
CLEAR: L_IMSEG-MBLNR,
L_IMSEG-MENGE,
L_IMSEG-MEINS.
*/ Bewegungsart lesen
SELECT SINGLE XSTBW FROM T156 INTO L_XSTBW
WHERE BWART = L_IMSEG-BWART.
Page 14
IF NOT SY-SUBRC IS INITIAL.
P_SUBRC = 4.
EXIT.
ENDIF.
*/ Werk/Lagerort füllen
IF P_QALS-STAT11 IS INITIAL.
IF L_XSTBW IS INITIAL.
MOVE P_QALS-LAGORTVORG TO L_IMSEG-LGORT.
ELSE.
MOVE P_QALS-LAGORTVORG TO L_IMSEG-UMLGO.
ENDIF.
ENDIF.
IF L_XSTBW IS INITIAL.
MOVE P_QALS-WERKVORG TO L_IMSEG-WERKS.
ELSE.
MOVE P_QALS-WERKVORG TO L_IMSEG-UMWRK.
ENDIF.
*/ Zusätzliche Felder
MOVE P_QALS-MENGENEINH TO L_IMSEG-ERFME.
"MOVE P_GRUND TO L_IMSEG-GRUND.
"MOVE P_ELIKZ TO L_IMSEG-ELIKZ.
*/ Kennzeichen Storno-Buchung setzen
MOVE 'X' TO L_IMSEG-XSTOB.
MOVE P_QALS-PRUEFLOS TO L_IMSEG-QPLOS.
APPEND L_IMSEG TO L_IMSEG_TAB.
IF P_QALS-STAT11 IS INITIAL.
ADD L_IMSEG-ERFMG TO L_LMENGEZUB.
SUBTRACT L_IMSEG-ERFMG FROM L_LMENGEGEB.
ELSE.
IF L_IMSEG-KZBEW EQ SPACE
AND L_IMSEG-WERKS NE SPACE
AND L_IMSEG-LGORT NE SPACE
AND L_IMSEG-UMWRK NE SPACE
AND L_IMSEG-UMLGO NE SPACE
AND L_IMSEG-WERKS EQ L_IMSEG-UMWRK
AND L_IMSEG-UMLGO EQ L_IMSEG-UMLGO.
*/ Dummy Buchung bei WE-Sperrbestand & Stichprobe
ELSE.
ADD L_IMSEG-ERFMG TO L_LMENGEZUB.
SUBTRACT L_IMSEG-ERFMG FROM L_LMENGEGEB.
ENDIF.
ENDIF.
ENDLOOP.
IF NOT P_QALS-STAT11 IS INITIAL.
*/ Bei WE-Sperrbestand und Stichprobenbuchung Zeilen tauschen
DO.
READ TABLE L_IMSEG_TAB INDEX SY-INDEX INTO L_IMSEG.
IF SY-SUBRC IS INITIAL
AND L_IMSEG-KZBEW EQ SPACE
AND L_IMSEG-WERKS NE SPACE
AND L_IMSEG-LGORT NE SPACE
AND L_IMSEG-UMWRK NE SPACE
AND L_IMSEG-UMLGO NE SPACE
Page 15
AND L_IMSEG-WERKS EQ L_IMSEG-UMWRK
AND L_IMSEG-UMLGO EQ L_IMSEG-UMLGO.
IF SY-TABIX NE L_TABIX.
DELETE L_IMSEG_TAB INDEX SY-TABIX.
INSERT L_IMSEG INTO L_IMSEG_TAB INDEX L_TABIX.
L_TABIX = L_TABIX + 1.
ELSE.
L_TABIX = L_TABIX + 1.
CONTINUE.
ENDIF.
ELSEIF SY-SUBRC IS INITIAL.
CONTINUE.
ELSE.
EXIT. "from do
ENDIF.
ENDDO.
ENDIF.
*/QM deaktivieren
CALL FUNCTION 'QAAT_QM_ACTIVE_INACTIVE'
EXPORTING
AKTIV = SPACE.
*/Buchen
CALL FUNCTION 'MB_CREATE_GOODS_MOVEMENT'
EXPORTING
IMKPF = L_IMKPF
XALLP = 'X'
XALLR = 'X'
CTCOD = L_TCODE
XQMCL = ' '
IMPORTING
EMKPF = L_EMKPF
TABLES
IMSEG = L_IMSEG_TAB
EMSEG = L_EMSEG_TAB.
*/QM wieder aktivieren
CALL FUNCTION 'QAAT_QM_ACTIVE_INACTIVE'
EXPORTING
AKTIV = 'X'.
*/Buchung auswerten
IF L_EMKPF-SUBRC GT 1.
IF L_EMKPF-MSGID NE SPACE.
*/ Fehler auf Kopfebene
MESSAGE ID L_EMKPF-MSGID TYPE 'S'
NUMBER L_EMKPF-MSGNO
WITH L_EMKPF-MSGV1 L_EMKPF-MSGV2
L_EMKPF-MSGV3 L_EMKPF-MSGV4.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ELSE.
*/ Fehler auf Zeilenebene (Ausgabe des ersten Fehlers)
LOOP AT L_EMSEG_TAB INTO L_EMSEG.
IF L_EMSEG-MSGID NE SPACE.
MESSAGE ID L_EMSEG-MSGID TYPE 'S'
NUMBER L_EMSEG-MSGNO
WITH L_EMSEG-MSGV1 L_EMSEG-MSGV2
L_EMSEG-MSGV3 L_EMSEG-MSGV4.
Page 16
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
LOOP AT L_EMSEG_TAB INTO L_EMSEG.
CALL FUNCTION 'QAMB_COLLECT_RECORD'
EXPORTING
LOTNUMBER = P_QALS-PRUEFLOS
DOCYEAR = L_EMKPF-MJAHR
DOCNUMBER = L_EMKPF-MBLNR
DOCPOSITION = L_EMSEG-MBLPO
TYPE = '7'.
ENDLOOP.
*/Sonderkorrektur für Frei-An-Frei & WE-Sperr-An-We-Sperr
IF NOT P_QALS-STAT11 IS INITIAL.
IF P_QALS-LMENGE04 EQ L_LMENGEGEB.
ADD P_QALS-LMENGE04 TO L_LMENGEZUB.
SUBTRACT P_QALS-LMENGE04 FROM L_LMENGEGEB.
ENDIF.
ELSEIF P_QALS-INSMK IS INITIAL.
IF P_QALS-LMENGE01 GE L_LMENGEGEB
AND NOT P_QALS-LMENGE01 IS INITIAL.
ADD L_LMENGEGEB TO L_LMENGEZUB.
SUBTRACT L_LMENGEGEB FROM L_LMENGEGEB.
ENDIF.
ENDIF.
CLEAR: P_QALS-STAT34,
P_QALS-MATNRNEU,
P_QALS-CHARGNEU,
P_QALS-LMENGE01,
P_QALS-LMENGE02,
P_QALS-LMENGE03,
P_QALS-LMENGE04,
P_QALS-LMENGE05,
P_QALS-LMENGE06,
P_QALS-LMENGE07,
P_QALS-LMENGE08,
P_QALS-LMENGE09.
P_QALS-LMENGEZUB = L_LMENGEZUB.
IF NOT L_LMENGEGEB IS INITIAL.
P_SUBRC = 4.
ENDIF.
ENDFORM. " CREATE_GOODS_MOVEMENT
Form POST_GOODS_MOVEMENT *
Warenbewegung buchen *
FORM POST_GOODS_MOVEMENT.
CALL FUNCTION 'MB_POST_GOODS_MOVEMENT'.
Page 17
ENDFORM. " POST_GOODS_MOVEMENT
Form POST_DATA *
QM-Daten verbuchen *
FORM POST_DATA USING P_QALS LIKE QALS
P_QALS_LEISTE LIKE QALS
P_QAMB_TAB TYPE T_QAMB_TAB
P_QAMB_VB_TAB TYPE T_QAMB_TAB
P_SUBRC LIKE SY-SUBRC.
DATA:
L_STAT LIKE JSTAT,
L_STAT_TAB LIKE JSTAT OCCURS 0,
L_QAMB LIKE QAMB,
L_UPDKZ LIKE QALSVB-UPSL VALUE 'U'.
*/QAMBs umsetzen (7 = VE-Buchung storniert)
LOOP AT P_QAMB_TAB INTO L_QAMB.
L_QAMB-TYP = '7'.
APPEND L_QAMB TO P_QAMB_VB_TAB.
ENDLOOP.
*/BERF & BTEI zurücknehmen
CLEAR L_STAT. CLEAR L_STAT_TAB.
L_STAT-INACT = 'X'.
L_STAT-STAT = 'I0219'. APPEND L_STAT TO L_STAT_TAB. "BTEI
L_STAT-STAT = 'I0220'. APPEND L_STAT TO L_STAT_TAB. "BEND
CALL FUNCTION 'STATUS_CHANGE_INTERN'
EXPORTING
OBJNR = P_QALS-OBJNR
TABLES
STATUS = L_STAT_TAB
EXCEPTIONS
ERROR_MESSAGE = 1.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
SUBMIT (SY-REPID) VIA SELECTION-SCREEN.
ENDIF.
*/Prüflos aktualisieren
CALL FUNCTION 'QPL1_UPDATE_MEMORY'
EXPORTING
I_QALS = P_QALS
I_UPDKZ = L_UPDKZ.
CALL FUNCTION 'QPL1_INSPECTION_LOTS_POSTING'.
CALL FUNCTION 'STATUS_UPDATE_ON_COMMIT'.
*/QAMB initialisieren
CALL FUNCTION 'QAMB_REFRESH_DATA'.
Page 18
PERFORM UPDATE_QAMB ON COMMIT.
P_SUBRC = 0.
ENDFORM. " POST_DATA
Form UPDATE_QAMB * -
Can a CIN be written for Visual Basic code
I've read about C code and CIN usage and seen references to other
languages such as Visual Basic (Visual Studio- don't have NET yet).
Is the only way to create a dll?Don't confuse a CIN (Code Interface Node) with the Call Library Function Node in which you interface to a dll. A CIN is a c language function only. The Call Library Function Node can be used for any dll in which the parameters and calling conventions are something LabVIEW can handle. You can create these dll's which c, C++, VB, Delphi, etc. The pdf document "Using External Code in LabVIEW" that is part of the shipping documentation explains the differences between the two. You can also find app notes and example code here that might help.
-
can anybody tell hw many QM Tables and T codes are ther in total approx.
and if possible which r imp. one?atleast tables.
thnxDear Sandip,
<b>Important QM Tables</b>
Area Table Description
Master Data QMAT Inspection type - material parameters
Master Data QMHU QM Link Between Inspection Lot and Handling Unit Item
Master Data QMTB Inspection method master record
Master Data QMTT Inspection Method Texts
Master Data QPAC Inspection catalog codes for selected sets
Master Data QPAM Inspection catalog selected sets
Master Data QPMK Inspection characteristic master
Master Data QPMT Master Inspection Characteristics Texts
Master Data QPMZ Assignment table - insp. methods/master insp. characteristic
Master Data TQ01D Authorization groups for QM master data
Master Data TQ01E Text authorization groups for QM master data
Master Data TQ21 Assignment of screens to screen groups
Master Data TQ25 QM:screen sequence for master and inspection characteristics
QM Master Data
Catalog QPCD Inspection catalog codes
Catalog QPCT Code texts
Catalog QPGR Inspection catalog code groups
Catalog QPGT Code group texts
Catalog TQ07 Follow-Up Action for Usage Decision of Inspection Lot
Catalog TQ07A QM: Function Modules for Follow-Up Action
Catalog TQ07T Language-dependent texts for Table TQ07
Catalog TQ15 Inspection catalog type index
Catalog TQ15T Language-dependent texts for table TQ15
Catalog TQ17 Defect classes
Catalog TQ17T Language-dependent texts for table TQ17
Catalog
Sample Determination QDEB Allwd. Relationships: Sampling Procedures/Dynamic Mod. Rules
Sample Determination QDEBT Allowed combinations of procedures/dynamic mod. rules: texts
Sample Determination QDPA Sampling scheme-instructions
Sample Determination QDPK Sampling scheme header
Sample Determination QDPKT Sampling scheme: texts
Sample Determination QDPP Sampling scheme item
Sample Determination QDQL Quality level
Sample Determination
Inspection Char TQ17A Weighting of Char
Inspection Char TQ11 Inspection Qualification
Inspection Char TQ29 Tolerance Keys
Inspection Char T006 Unit of measurement
Inspection Char
Dynamic Modification QDBM Valuation mode
Dynamic Modification QDBMT Valuation Mode: Texts
Dynamic Modification QDDR Dynamic modification rule (header)
Dynamic Modification QDDRT Dynamic modification rule: texts
Dynamic Modification QDEP Allowed inspection severities
Dynamic Modification QDEPT Allowed Inspection Severities: Texts
Dynamic Modification QDFB Function modules for the individual procedure categories
Dynamic Modification QDFBT Function Modules for Procedure: Texts
Dynamic Modification QDFM Function modules for valuation mode
Dynamic Modification QDFMT Function Modules for Valuation Mode: Texts
Dynamic Modification QDPS Inspection stages for a dynamic modification rule
Dynamic Modification QDPST Inspection Stages: Texts
Dynamic Modification QDSA Sampling type
Dynamic Modification QDSAT Sampling Type: Texts
Dynamic Modification QDSV Sampling procedure
Dynamic Modification QDSVT Sampling Procedure: Texts
Dynamic Modification TQ39B QM : Activates reference for dyn. modification level
Dynamic Modification
Graphics & SPC QASH Quality control chart
Graphics & SPC QAST Control chart track
Graphics & SPC QPSH Control chart types
Graphics & SPC QPSHT Texts for control chart types
Graphics & SPC QPSP SPC criterion
Graphics & SPC QPSPT Texts for SPC criteria
Graphics & SPC QPST Control chart track
Graphics & SPC QPSTT Texts for control chart tracks
Graphics & SPC
Specifications QMSP QM: material specification
Specifications
Inspection Plan PLKO Inspection plan Header
Inspection Plan MAPL Material Assignement
Inspection Plan PLPO Operation Details
Inspection Plan PLMK Inspection plan characteristics
Inspection Plan PLMW MAPL-Dependent Charac. Specifications (Inspection Plan)
Inspection Plan TQ03 QSS: Control for Screen Texts/TABLE NOT USED (Rel. 4.6)
Inspection Plan TQ29A Dependency tolerance key - nominal measurement
Inspection Plan TQ72 Type of share calculation
Inspection Plan TQ72T Texts for type of share calculation
Inspection Plan TQ75 QM formula parameters
Inspection Plan TQ75F Field names for QM formulas
Inspection Plan TQ75K Short text for Table TQ75F
Inspection Plan TQ75T Description of formula parameters
Inspection Plan
Qm in procurement QINF QM-info record for material and vendor
Qm in procurement TQ02 QM system definition
Qm in procurement TQ02A QM system assignment and QM system requirements
Qm in procurement TQ02B QM system
Qm in procurement TQ02T QM system description
Qm in procurement TQ02U Description QM system
Qm in procurement TQ04A Functions that can be blocked
Qm in procurement TQ04S QM block functions : texts
Qm in procurement TQ05 QM certificate categories for procurement
Qm in procurement TQ05T QM: text table for certificate types
Qm in procurement TQ08 Control of QM in procurement
Qm in procurement TQ08T QM: text for QM procurement keys
Qm in procurement TQ09 QM: agreement of QM document types
Qm in procurement TQ09T QM: agreement of QM document types
Qm in procurement TQ32A Inspection type to status assignment from status profile
Qm in procurement
QM in SD QVDM QM Info Record - QM Control in SD
QM in SD TQ32B Find insp.type for quality insp. for delivery note
QM in SD
Inspectio lot QALS Inspection lot record
Inspectio lot QALT Partial lot
Inspectio lot T156Q Movement Type: Material-Independent Control
Inspectio lot TQ30 Inspection types
Inspectio lot TQ30T Texts for inspection types
Inspectio lot TQ32 Assignment of inspection type to origin
Inspectio lot TQ32C Lot creation allowed values for the origin
Inspectio lot TQ32C _T Texts for lot creation indicator
Inspectio lot TQ33 Relevant fields for origin
Inspectio lot TQ34 Default values for inspection type
Inspectio lot
Inspection point QAPP Inspection point
Inspection point TQ79 Table with inspection point/user field combinations
Inspection point TQ79T Key words for inspeciton point user fields
Inspection point
Results Recording QAES Sample unit table
Results Recording QAKL Results table for value classes
Results Recording QAMR Characteristic results during inspection processing
Results Recording QAMV Characteristic specifications for inspection processing
Results Recording QASE Results table for the sample unit
Results Recording QASR Sample results for inspection characteristics
Results Recording QASV Sample specifications for inspection processing
Results Recording TQ12 Ind. external numbering for test units in results recording
Results Recording TQ12T Texts for the ind. for ext. numbering of units to be insp.
Results Recording TQ70 Control table for results recording
Results Recording TQ70C Function codes for navigation from the char.overview screen
Results Recording TQ70E Screen-based processing tables
Results Recording TQ70F Navigation during results recording
Results Recording TQ70S Characteristic overview screen for results recording
Results Recording TQ73 Origin of results data
Results Recording TQ73T Texts for origin of results data
Results Recording TQ74 Recording configuration
Results Recording TQ74T Recording configuration
Results Recording TQ76 Processing status of inspection characteristics
Results Recording TQ76T Texts for the processing status of insp. characteristics
Results Recording TQ77 Attributes for the Inspection Characteristic
Results Recording TQ77T Text Tables for Attributes
Results Recording TQ78 Status-dependent processing table for insp. characteristics
Results Recording TQ78T Texts for the status-specific proc. table for insp. char.
Results Recording
Defects recording TQ84 Confirmation profile
Defects recording TQ84T Text table for confirmation profile
Defects recording TQ86 Report category for defects recording
Defects recording TQ86A Assignment report category for work center
Defects recording TQ86T Text table for report category
Defects recording V_T35 2B_F Generated table for view V_T352B_F
Defects recording
Usage decision QAMB QM: Link Between Inspection Lot and Material Document
Usage decision QAVE Inspection processing: Usage decision
Usage decision TQ06 Procedure for Calculating the Quality Score
Usage decision TQ06T Language-specific texts for Table TQ06
Usage decision TQ07M QM: Inventory postings with usage decision
Usage decision
Sample Mgmt QPRN Sample drawing of phys. samples
Sample Mgmt QPRS Master record for phys. samples
Sample Mgmt QPRVK Sample-drawing procedure
Sample Mgmt QPRVK T Header for sample drawing procedure texts
Sample Mgmt QPRVP Sample-drawing items
Sample Mgmt QPRVP T Items for sample drawing procedure texts
Sample Mgmt TQ40 Definition of sample types
Sample Mgmt TQ40T Text table for sample type
Sample Mgmt TQ41 Storage locations for physical samples
Sample Mgmt TQ41T Texts for storage locations
Sample Mgmt TQ42 Physical sample containers
Sample Mgmt TQ42T Texts for phys. sample containers
Sample Mgmt
QMIS S068 Vendor statistics
QMIS S069 Material statistics
QMIS S097 QM notifications: Matl anal.
QMIS S098 QM notification: Vendor anal.
QMIS S099 QM notifications: Cust. anal.
QMIS S100 Problems: Material analysis
QMIS S102 Problems: Vendor analysis
QMIS S103 Problems: Customer analysis
QMIS S104 Customer statistics
QMIS S161 Inspection results: General
QMIS S162 Quantitative insp. results
QMIS S163 Quant. Insp. Result: Vendor
QMIS S164 Quant. Insp. Result: Vendor
QMIS S165 Inspection result: gen. custs
QMIS S166 Insp. Results: Quant. Customer
QMIS TQ55 Assign inspection lot origin for update group
QMIS TQ56 Definition of quality score classes
QMIS TQ56T Text table for the definition of quality score classes
QMIS TQ57 Assignment of quality score key to info structure
QMIS
Quality Certificates QCPR QM quality certificates in procurement
Quality Certificates I000 Conditions for certificate profile
Quality Certificates KONDI Conditions: Data part for certificates
Quality Certificates QCVK Certificate profile header
Quality Certificates QCVM Certificate profile characteristic level
Quality Certificates QCVMT Certificate profile characteristic level: texts
Quality Certificates QCVV Certificate Profile: List of Preliminary Products
Quality Certificates TQ61 Result value origin for certificates
Quality Certificates TQ61T Origin of result values for certificates: texts
Quality Certificates TQ62 Output strategy for skip characteristics
Quality Certificates TQ62T Output strategy for skip characteristics: texts
Quality Certificates TQ63 Origin of insp. specs for certificates (function modules)
Quality Certificates TQ63T Origin of inspection specifications for certificates: texts
Quality Certificates TQ64 Origin of characteristic short text for certificates
Quality Certificates TQ64T Origin of characteristic short text for certificates: texts
Quality Certificates TQ65 Certificates: Combinations allowed for origins, specs/values
Quality Certificates TQ67 Certificate-Relevant Output Types
Quality Certificates
Quality Notification QMEL Notification header
Quality Notification QMFE Item
Quality Notification QMSM Task
Quality Notification QMMA Activities
Quality Notification T352C Catalog types for each catalog profile
Quality Notification TQ81 Notification Scenario
Quality Notification TQ81V Usage of parts
Quality Notification TQ81V_T Texts for usage of parts
Quality Notification TQ81_T Texts for Notification Scenarios
Quality Notification TQ82 Change of Notification Type
Quality Notification TQ83 Partner Functions for Codes
Quality Notification TQ85 Function table for follow-up functions
Quality Notification TQ85R Rules for Follow-Up Functions
Quality Notification TQ85_T Action box text table
Quality Notification TQ8CO Assignment of reference orders to notification type
Quality Notification
Other Objects MARA Material Number
Other Objects T001W Plant
Other Objects LFA1 Vendor
Other Objects KNA1 Customer
Other Objects AUFK Order Number
Other Objects SAFK Run Schedule Header Number
Other Objects MCH1 Batch Number
Other Objects MCHA Batch Record
Other Objects EKKO Purchasing Document Header
Other Objects EKPO Purchasing document Item
Other Objects EKET Delivery Schedule
Other Objects VBUK Delivery Header
Other Objects VBUP Delivery Item
Other Objects CSKS Cost Center
Other Objects EQUI Equipment Number
<b>Transaction List:</b>
Q000 Quality management
QA00 Quality inspection
QA01 Create Inspection Lot
QA01A Create Inspection Lot
QA02 Change Inspection Lot
QA02A Change Inspection Lot
QA03 Display inspection lot
QA05 Job planning: Periodic inspection
QA06 Job overview: Periodic inspection
QA07 Trigger for recurring inspection
QA07L Deadline Monitoring Log
QA08 Collective Processing of Insp. Setup
QA09 No. range maintenance for insp.lots
QA10 Trigger automatic usage decision
QA10L Log for Automatic Usage Decision
QA11 Record usage decision
QA12 Change usage decision with history
QA13 Display usage decision
QA14 Change UD without history
QA16 Collective UD for accepted lots
QA17 Job planning for auto usage decision
QA18 Job overview for auto usage decision
QA19 Automatic usage decision
QA22 Change inspection point quantities
QA23 Display insp.point quantities
QA32 Change data for inspection lot
QA32WP QA32 -Call from Workplace/MiniApp
QA33 Display data for inspection lot
QA40 Auto. Usage Decision for Production
QA40L Log for Automatic Usage Decision
QA41 Scheduling UD for Production Lots
QA42 Job planning: UD prod. insp.lots
QA51 Scheduling Source Inspections
QA52 Source inspections: Job overview
QAC1 Change insp. lot actual quantity
QAC2 Transfer stock to insp. lot
QAC3 Reset sample
QAER Display archive objects
QAS1 Download Insp. Specs. (Obsolete)
QAS2 Download Basic Data (Obsolete)
QAS3 Upload Results (Obsolete)
QAS4 Upload UD (Obsolete)
QC01 Create certificate profile
QC02 Change certificate profile
QC03 Display certificate profile
QC06 Immediate delete of cert. profiles
QC11 Create cert. profile assignment
QC12 Change cert. profile assignment
QC13 Display cert. profile assignment
QC14 Create cert.prof.assign.w/copy model
QC15 Create cert. profile assignment
QC16 Change cert. profile assignment
QC17 Display cert. profile assignment
QC18 Create cert.prof.assign.w/copy model
QC20 Certificates for Deliveries
QC21 Quality certificate for the insp.lot
QC22 Quality Certificate for Batch
QC31 Archive display: Delivery item
QC32 Archive display: Inspection lot
QC40 Internet Certificate for Delivery
QC40A Internet Certificate for Delivery
QC42 Batch certificate on WWW
QC51 Create certificate in procurement
QC52 Change certificate in procurement
QC53 Display certificate in procurement
QC55 Worklist: Certificates - Procurement
QCC0 QM: Direct Access to IMG
QCC1 Direct Access to IMG: Notification
QCC2 IMG Direct Access: QM Q-Notification
QCC3 IMG Direct Access: QM Q-Inspection
QCC4 IMG Direct Access: QM Q-Planning
QCC5 IMG Direct Selection: QM Bus. Add-In
QCC_STABI Copy Stability Study Customizing
QCC_STABI_NK Copy Stability Study Number Ranges
QCCC QM standard settings complete
QCCF QM standard forms
QCCK QM standard settings: Catalogs
QCCM QM std. settings: Qual. notifs.
QCCN QM standard number ranges
QCCP QM std. settings: Quality planning
QCCS QM sampling schemes
QCCT QM standard texts
QCCU QM standard settings: Environment
QCCW QM std. settings: Quality inspection
QCCY Transport QM tolerance key
QCCZ QM std. settings: Qual. certificates
QCE2 Edit Communication Support
QCE3 Display Communication Support
QCYF QM standard forms (general)
QCYT QM standard texts (general)
QD21 Mark completed notifications
QD22 Archiving Notifications: Archive
QD24 Archiving Notifications: Delete
QD25 Archiving Notifications: Admin.
QD33 Delete quality level
QD34 Delete quality level planning
QD35 Delete job overview for Q-levels
QDA1 Edit sampling type
QDA3 Display sampling type
QDB1 Maintain allowed relationships
QDB3 Display allowed relationships
QDH1 Q-level evaluation: Change data
QDH2 Q-level evaluation: Display data
QDL1 Create quality level
QDL2 Change quality level
QDL3 Display quality level
QDM1 Edit valuation mode
QDM3 Display valuation mode
QDP1 Create sampling scheme
QDP2 Change sampling scheme
QDP3 Display sampling scheme
QDR1 Create dynamic modification rule
QDR2 Change dynamic modification rule
QDR3 Display dynamic modification rule
QDR6 Disp. where-used list-dyn. mod. rule
QDR7 Replace dynamic mod. rule used
QDV1 Create sampling procedure
QDV2 Change sampling procedure
QDV3 Display sampling procedure
QDV6 Uses: Sampling procedures
QDV7 Replace sampling procedure used
QE00 Quality Planning
QE01 Record characteristic results
QE02 Change characteristic results
QE03 Display characteristic results
QE04 Record sample results
QE05 Change sample results
QE06 Display sample results
QE09 Indiv.display of charac.result
QE09WP Call QE09 from Workplace
QE11 Record results for inspection point
QE12 Change results for inspection point
QE13 Display results for inspection point
QE14 Record results for delivery note
QE15 Change results for delivery note
QE16 Display results for delivery note
QE17 Record results for equipment
QE18 Change results for equipment
QE19 Display results for equipment
QE20 Record results for funct. location
QE21 Change results for funct. location
QE22 Display results for funct. location
QE23 Record results for phys. sample
QE24 Change results for phys. sample
QE25 Display results for phys. sample
QE29 No. Range Maint.: Conf. No. for Char
QE51 Results recording worklist
QE51N Results Recording Worklist
QE52 Worklist: Results for phys. sample
QE53 Worklist: Record results for equip.
QE54 Worklist: Results for funct. loctns
QE71 Tabular res. recording for insp. pts
QE72 Tabular Results Rec. for Insp. Lots
QE73 Tabular res. recording for characs.
QEH1 Worklist for Mobile Results Rec.
QEI1 Displaying QM Interfaces Appl. Log
QEI2 Deleting QM Interfaces Appl. Log
QEW01 Results Recording on Web
QEW01V Variant Maint.: Recording on Web
QF01 Record defect data
QF02 Change defect data
QF03 Display defect data
QF11 Record defects for inspection lot
QF21 Record defects for operation
QF31 Record defects for characteristic
QG09 Maint. num. range Q control charts
QGA1 Display quality score time line
QGA2 Display inspection results
QGA3 Print inspection results
QGC1 Qual. control charts for insp. lots
QGC2 Control charts for task list charac.
QGC3 Control charts for master insp. char
QGD1 Test Equipment Usage List
QGD2 Test Equipment Tracking
QGP1 Results history for task list charac
QGP2 Results History for Task List Charac
QI01 Create quality info. - purchasing
QI02 Change qual.information - purchasing
QI03 Display quality info. - purchasing
QI04 Job planning for QM procurement keys
QI05 Mass maintenance QM procurement keys
QI06 QM Releases: Mass maintenance
QI07 Incoming insp. and open pur. orders
QI08 Job overview of QM procurement keys
QISR Internal Service Request
QISR1 Internal Service Request - Forms
QISR_PCR60 vc_scenario for Message type 60(PCR)
QISR_SM29 ISR Customizing: Table Transfer
QISR_SR12_START Suggestion System
QISRSCENARIO Customizing Szenario
QISRTRANSPORT ISR Customizing Transport
QISRW Internal Service Request on the Web
QK01 Assign QM order to material
QK02 Display assigned QM orders
QK03 Maintain specs. for order type
QK04 Create QM order
QK05 Confirmed activities for insp. lot
QL11 Mat: Distribute Inspection Setup-ALE
QL21 Master Inspection Characs (ALE)
QL31 Distribute Inspection Methods (ALE)
QL41 Distribute Code Groups (ALE)
QM00 Quality Notifications
QM01 Create quality notification
QM02 Change quality notification
QM03 Display quality notification
QM10 Change list of quality notifications
QM10WP QM10 - Call from Workplace/MiniApp
QM11 Display List of Qual. Notifications
QM12 Change list of tasks
QM13 Display list of tasks
QM13WP QM13 - Call from Workplace/MiniApp
QM14 Change list of items
QM15 Display list of items
QM16 Change activity list
QM17 Display activity list
QM19 List of Q Notifications, Multi-Level
QM50 Time line display Q notifications
QMW1 Create quality notification (WWW)
QP01 Create
QP02 Change
QP03 Display
QP05 Print inspection plan
QP06 List: Missing/unusable insp. plans
QP07 List: Missing/Unusable GR InspPlans
QP08 Print task lists for material
QP11 Create reference operation set
QP12 Change reference operation set
QP13 Display reference operation set
QP48 Number Ranges for Physical Samples
QP49 Number range for phys. samp. drawing
QP60 Time-related development of plans
QP61 Display change documents insp.plan
QP62 Change documents ref.operation sets
QPIQS8 QM MiniApp Selection Variant
QPIQS9 QM MiniApp Selection Variant
QPNQ Number ranges for inspection plans
QPQA32 QM MiniApp Selection Variant
QPQGC1 QM MiniApp Selection Variant
QPQM10 QM MiniApp Selection Variant
QPQM13 QM MiniApp Selection Variant
QPR1 Create physical sample
QPR2 Change physical sample
QPR3 Display physical sample
QPR4 Confirm physical sample drawing
QPR5 Manual inspection lots for physSamps
QPR6 Create new phys.-samp. drawing w.ref
QPR7 Storage Data Maintenance
QPV2 Maintain sample drawing procedure
QPV3 Display sample drawing procedure
QS21 Create master insp. characteristic
QS22 Create master insp. charac. version
QS23 Change master insp. charac. version
QS24 Display master insp. charac. version
QS25 Delete master insp. charac. version
QS26 Display characteristic use
QS27 Replace master insp. characteristic
QS28 Display insp. charac. list
QS29 Maintain characteristic number range
QS31 Create inspection method
QS32 Create inspection method version
QS33 Change inspection method version
QS34 Display inspection method version
QS35 Delete inspection method version
QS36 Display inspection method use
QS37 Central replacement of methods
QS38 Display inspection method list
QS39 Maintain method number range
QS41 Maintain catalog
QS42 Display catalog
QS43 Maintain catalog
QS44 Maintain catalog
QS45 Display catalog
QS46 Display code group use
QS47 Central replacement of code groups
QS48 Usage indicator - code groups
QS49 Display code groups and codes
QS4A Display catalog
QS51 Edit Selected Sets
QS52 Display selected set index
QS53 Maintain individual selected set
QS54 Maintain selected set
QS55 Display selected set
QS58 Usage indicator - selected sets
QS59 Display selected sets
QS61 Maintain material specification
QS62 Display material specification
QS63 Maintain material spec: Planning
QS64 Display material spec: For key date
QS65 Activate material specification
QS66 Plan activation of material spec.
QS67 Job overview: Activate mat. spec.
QSR5 Archive inspection plans
QSR6 Delete routings
QST01 Create Stability Study
QST03 Display Stability History
QST04 Display Inspection Plans
QST05 Graphical Scheduling Overview
QST06 Scheduling Overview (StabilityStudy)
QST07 Change Testing Schedule Items
QST08 Display Testing Schedule Items
QSUB Define subsystems
QT00 Test Equipment Management
QT01 Test equipment management
QTSA Product Allocations: Send Quantities
QTSP Product Allocations:Send Customizing
QUERY_BP_FSBPBILDER BP: Screen Customizing for Query
QV01 Create quality assurance agreement
QV02 Change quality assurance agreement
QV03 Display quality assurance agreement
QV04 Find Quality Assurance Agreement
QV11 Create technical delivery terms
QV12 Change technical delivery terms
QV13 Display technical delivery terms
QV14 Search technical terms of delivery
QV21 Create QA agreement (DocType Q03)
QV22 Change Q-agreement (doc. type Q03)
QV23 Display Q-agreement (doc. type Q03)
QV24 Find Q-agreement (doc. type Q03)
QV31 Create Q-spec. (doc.type Q04)
QV32 Change Q-specification (docType Q04)
QV33 Displ. Q-specification (docType Q04)
QV34 Find Q-specification (doc. type Q04)
QV51 Create control for QM in SD
QV52 Change control for QM in SD
QV53 Display control for QM in SD
QVM1 Inspection lots without completion
QVM2 Inspection lots with open quantities
QVM3 Lots without usage decision
QZ00 Quality Certificates
Hope this will help.
Regards,
Naveen. -
Help me in usage of advanced queuing please ....
hello all,
we are developing a network based application in java servlets and oracle 8i as database at the servers.
to transfer data as costomised messages we are using ibm mq series as middle layer on top of tcp/ip.
we want to replace ibm mq series with oracle advanced queuing.
i could not find any details regarding this latest feature
i want to know what are the java packages available to use this feature and how to use them
are they similar to that of ibm.mq package
can i have some sample code about the usage of them ?
please send me the details ......
with regards,
prasadTry the standard ORACLE documentation
Oracle8i Application Developers Guide - Advanced Queuing (AQ).
There are also some examples.
Others you can find in $(ORACLE_HOME)\oci\samples -
can some one explain me where sales bom is uned.
is there any chance where we can use it in a production process.Hi,
While using the material in each dept. the usage differs so for that sap provided this function. for sales bom is used only sales and also that material already exist in the plant. and mm bom the material has to procure from the some third party that all functionality will control throgh the maitaning bom usage.
You can use OS20 T code for the usage.
Refer this thread also,
https://forums.sdn.sap.com/click.jspa?searchID=16427620&messageID=4368923
Regards,
R.Brahmankar
Edited by: R Brahmankar on Sep 18, 2008 11:16 AM -
Segment Usage/Freespace by device.
I need the ability to monitor my segment usage by device in MB for data growth. The scripts I have found/developed are not providing the information I need. At a minim the devices are separated by data and index. Would any one have a good script for this?
Example.
Database ScoobyDoo.
database_name database_size
ScoobyDoo 284536.0 MB
reserved data index_size unused
164417808 KB 92098352 KB 70607632 KB 1709536 KB
Segment Device PhyDvSize AssignedDvSize DataUsed %Avail
Seg_SD_Data ScoobyDoo _Data1 81920 81000 79,999 0%
Seg_SD_Data ScoobyDoo _Data2 81920 81000 54,399 33%
Seg_SD_IDX1 ScoobyDoo _IDX_Shaggy 30000 29500 12,853 57%
Seg_SD_IDX2 ScoobyDoo _IDX_Velma 30000 29200 15,478 48%Here is the code:
Select 'Segment Usage'
select db_name(d.dbid) as db_name, v.name,
"Data Size," = sum(size * abs(sign(segmap - 4))) *16/1024,
"Data Used," = sum((size - curunreservedpgs(d.dbid, lstart, unreservedpgs)) * abs(sign(segmap - 4)))*16/1024 ,
convert(varchar(10),100-ceiling(100 * (1 - 1.0 * sum(case when u.segmap != 4 then curunreservedpgs(u.dbid, u.lstart, u.unreservedpgs) end) / sum(case when u.segmap != 4 then u.size end)))) as '% data spacee avail'
from master..sysdatabases d, master..sysusages u,
master..sysdevices v
where u.dbid = d.dbid and d.status != 256 and
db_name(d.dbid) not like '%model%' and
db_name(d.dbid) not like 'temp%' and
db_name(d.dbid) not like 'sybsystem%' and
upper(v.name) not like 'TAPEDUMP%' and
upper(v.name) not like '%LOG%' and
v.vdevno = u.vdevno
group by d.dbid, v.name
order by d.dbid, v.name
Results From Dev Environment:
Segment Usage
db_name name Data Size, Data Used, % data space avail
master master 400 36 90
BuggsB WBA_BuggsB_Data 37000 13973 62
WillyECoyote WBA_WillyECoyote_Data 1000 157 84
Sylvester WBA_Sylvester_Data1 81000 79855 1
Sylvester WBA_Sylvester_Data2 81000 55995 30
Sylvester WBA_Sylvester_IDX_CatData 29500 11223 61
Sylvester WBA_Sylvester_IDX_CatItems 29500 9137 69
TweetyB WBA_TweetyB_Data 37000 36999 0
TweetyB WBA_TweetyB_Data2 37000 16184 56
TweetyB WBA_TweetyB_IDX_BirdTables 40000 6625 83
TweetyB WBA_TweetyB_TBL_BirdTables 10000 1505 84
UserHome WBA_UserHome_Data 348 27 91
ElmerFudd WBA_ElmerFudd_Data 10240 448 95
SybMonitor WBA_SybMonitor_Data 10000 51 99
RoosterCogburn WBA_RoosterCogburn_Data 1500 1016 32
CrunchData WBA_CrunchData_Data1 50000 31771 36
Maybe you are looking for
-
XML data into spreadsheet form?
I created the form and a customer filled it out and returned it to me using the submit button via email. Is there a way to take the xml data and populate an excel spreadsheet appropriately? Adobe LiveCycle Designer 7.0/ Microsoft XP Pro/ 160 gig hard
-
IPhone '08 version 7.1.5 to iPad
My iPad shows up in iPhoto, but I cannot drag and drop albums into iPhoto. Why?
-
Airport download speeds slow when extending display to LCD
When I connect my Macbook using the mini display to DVI, DVI to HDMI adapter to my LCD TV, my download speeds pretty much fall off to nothing. When I disconnect the display adapter, the connection resumes. Any ideas?
-
Hi Everyone, I need a query that gives the transactions made to GLl from AR,AR and other responsibility in particular period. I required the fields to display in my report are: GL transaction date, account number,debit, credit, opening balance,period
-
Junk email rule causing problems with mailbox restore
Running the command new-restoremailboxrequest on Exchange 2010 SP1. The restore fails and the following event is logged which seems to indicate a conflict with the Junk Email rule. I've tried disabling junk email by using set-mailboxjunkemailconfig