T Code: MB22, Disable/Enable Movemnt allowed indicator on a condition.

I need to disable/enable the movement Allowed indicator depending on a specific condition in T Code MB22.
I tried to put a break point in MB_RESERVATION_BADI implementation. But it is triggered only after I save the changes made in the Reservation.
I want a BADI/ User exit that is triggered when I enter the MB22 screen before the changes are being made.
Any Help?
Edited by: qwerty_m on Oct 3, 2011 1:01 PM

Hi ,
In the subroutine DYNPRO_MODIFIZIEREN (include FM07MED0_DYNPRO_MODIFIZIEREN) you can implement the enhancement point DYNPRO_MODIFIZIEREN_03 and make the screen input 0 or 1 for the field 'RESB-XWAOK' based on the conditions when the tcode is MB22.
Regards,
Poornima

Similar Messages

  • Scroll Bar Disable/Enable

    I need a code that will enable and disable the browser window
    scroll bars when the browser window is resized smaller than my
    MovieClip (800x650) and will disable them when the browser window
    is bigger than the movie clip.
    I have my publish settings set at 100% and becuase of this it
    does not allow the browser scroll bars to be enabled/disabled.
    Thanks In Advance For Any Help You Can Provide!

    Hi mbhatti2000,
    - Could you put up a small example of what you mean?
    If you just want to disable the array indicator and gray it out, then you can use the property shown below.
    Regards,
    Peter D
    Attachments:
    DisableIndicator.vi ‏9 KB

  • Enabling Insert allowed for particualr records in a block,

    Hi All,
    I have a requirement to enable insert allowed(and delete allowed) button for only particular records(say for all records where column1=2) and for all other values that insert allowed button should be disabled.
    I tried setting the property
    SET_BLOCK_PROPERTY for insert allowed for my block, in new_block_instance.
    when i'm querying the first time with column1=2, its working fine.
    But, when im querying my blcok with column1=5 and then requerying the block with column1=2, im facing issue. insert allowed button is disabled here.
    Not sure, whether this can be achieved or not using this way. Please suggest me if there is any other ways we can do in oracle forms.
    Thanks & regards,
    Pavan Kumar

    I have used the below code in when new record instance at block level,
    IF event='INSERT'
    THEN
    IF :xxscp_gbl_exp_detail_v.order_type=5
         THEN
         SET_BLOCK_PROPERTY('XXSCP_GBL_EXP_DETAIL_V',
         insert_allowed,
         property_true);
    ELSE
    SET_BLOCK_PROPERTY('XXSCP_GBL_EXP_DETAIL_V',
         insert_allowed,
         property_false);
    END IF;
    END IF;
    as i already told, it work when i directly search with order_type=5.
    But not working, when i first search with order_type=1 and then with order type 5.
    Thanks in advance,
    pavan

  • Trying to download Msecer from app store keep getting error code(4) disabled growl

    trying to download Msecer from app store keep getting error code(4) disabled growl & enabled gatekeeper to allow download from app store but still cant down load app to mini mac. Anyone have any solutions i havent tryed?

    Hi ..
    Disable anti virus software if installed
    Make sure the firewall is turned off in System Preferences > Security & Privacy > Firewall

  • Enable Goods Receipt Indicator

    Dear all,
    I would like to ask how can I activate the Goods Receipt and GR Non-Valuated indicator in the Purchase Order Delivery Tab page.  Currently it is marked as disabled during creation of the PO.  Thanks.

    Hi
    Goods receipt Indicator
    For stock Material Procurement the Goods receipt indicator is set automatically by SAP standard setting sothat you can do the GR against the Purchase order.
    The below combinations are having the same functinality if the material is procured for multiple account assignment ie) Consumable Material procurment where the GR is Non valuated. If you use certain certain material type like NLAG or UNBW then the indicator will be set by the system.
    Also if you select mulitple account assignment the systme will set these indicators.
    1) Goods Receipt indicator - Disabled
        GR Non valuated indicator - Disabled
    2) Goods Receipt indicator - Enabled
        GR Non valuated indicator - Enabled
    Hope you understood. If no please explain why do you want to activate the indicators??
    Thanks / Karthik

  • External Speakers Randomly Stop Working until I "Test" or Disable/Enable

    I'm using a HP Pavillion DV6 Notebook PC Running Windows 7 Professional 64-bit SP1.
    External speakers randomly stop working until I "test" or disable/enable them. Headphone/HDMI Audio Works.
    Background
    -Recently had to do a clean install of windows.
    -Went to the HP Drivers Website and downloaded all of the latest drivers.
    -I installed several other programs as well (Flash, Steam, Media Player, Browser)
    -The problem started
    Current Settings
    -My deafult device is "Speakers and Headphones: IDT High Definition Audio CODEC"
    -Enhancements are disabled
    -Bass and Treble are set to 4
    -Format is set to 16 bit, 48000 Hz (DVD Quality)
    -Allowing applications to take exclusive control of the device or not doesn't make a difference (but it's currently off)
    Troubleshooting
    -The audio works by plugging in headphones or using an HDMI device
    -The audio comes back if I go to my sound settings and hit "Test", or if I disable and re-enable the device
    Error Messages
    -Youtube starts the video for 3 seconds, restarts and sputters a bit, and then says that there was an error
    -My media player (MusicBee) gives me this message: "Unable to start playback (Error = BASS_ERROR_BUFLOST)"
    That's everything I can think of. Any ideas?

    Hi TheBigBoy,
    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having a frustrating time with the sound to your external speakers. Have you tried connecting the speakers to another computer to see if is a hardware issue with the speakers? Do the regular speakers work? What is your product number as there are several models in the dv6 series?
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • IOS6 update disabled the option to disable/enable location services

    I have updated to iOS6 (from the earlier latest iOS5.x.). I now notice that the option to Disable / Enable Location Sevices (global / application specific) is now not possible post this update to iOS6.
    Note, I have already tried the "Rest Network Settings" and "Reset Location & Privacy" neither of which seem to have helped, reboot the iPhone does not help either. please advise if you came across this issue.

    Go to settings/general/restrictions then look at location services and make sure it is set to allow changes

  • WLST Script for Disabling/Enabling Global SLA Alerting.

    Hello,
    I wanna find a way from the WLST to disable and enable the SLA Alerting which is under Operations-->Global Settings in the sbconsole. This is the global setting not per sercive!
    I have found how to create a session and how to disable the alerts per service, but i cannot find which MBean is accessed when throught the sbconsole the global SLA alerting is disabled/enabled.
    Can anybody point me to the right direction or help me to find how to do this from WLST.
    Thanks.

    Hi Ganesh,
    I have finally created the script i was looking for.. I copy-paste it below as a sample... For sure you need all the lines of code until the comment i have put "#####you need this code above"
    now the code you see below the comment is for disabling the global sla alerting... you have to write a bit to target a specific service that you want to disable.
    Keep in mind that after you make your change you hava to include those lines in order to activate the changes and disconnect and exit..
    sessionMBean.activateSession(sessionName, "enable SLA")
    disconnect()
    exit()
    If you have access to oracle support search for wlst script for osb it has a lot and you can find how to target a specific service...
    I hope that i help a little bit
    import sys
    import wlstModule
    from com.bea.wli.sb.management.configuration import SessionManagementMBean
    from com.bea.wli.sb.management.configuration import ALSBConfigurationMBean
    #from com.bea.wli.sb.management.configuration import ProxyServiceConfigurationMBean
    from com.bea.wli.sb.management.configuration.operations import OperationsConfigMBean
    from com.bea.wli.config import Ref
    from com.bea.wli.sb.util import Refs
    # Connect (username, password, URL)
    connect('weblogic', 'password', 't3://localhost:7001')
    domainRuntime()
    # Create a session name
    sessionName =sessionName = String("SessionScript"+Long(System.currentTimeMillis()).toString())
    print('... after session. Session is: ', sessionName)
    # Get the session MBean and create a session
    sessionMBean = findService(SessionManagementMBean.NAME,SessionManagementMBean.TYPE)
    print('-debug-this is the sessionbean',sessionMBean)
    print('SessionMBean is: ', sessionMBean)
    sessionMBean.createSession(sessionName)
    print(String('Session was created ... ').concat(sessionName))
    #####you need this code above
    domainCustom()
    cd('com.bea')
    #path='com.bea:Name=OperationsConfig.'+sessionName+',Location=AdminServer,Type=com.bea.wli.sb.management.configuration.operations.OperationsConfigMBean'
    cd('com.bea:Name=OperationsConfig.'+str(sessionName)+',Location=AdminServer,Type=com.bea.wli.sb.management.configuration.operations.OperationsConfigMBean')
    set('DomainSLAAlertingEnabled',java.lang.Boolean("true"))
    # Now commit (activate) the changes
    sessionMBean.activateSession(sessionName, "enable SLA")
    disconnect()
    exit()

  • Disable / Enable Swing Objects

    Hello,
    I have a JFrame with objects on it,
    like several JTextField, JComboBox, JFormattedTextField, JCheckBox, JButton.
    - User set some parameters on the GUI
    - When user press the "export" button, an export function starts as Thread.
    During the export process, how can I prevent that user changes the settings or press the export button again?
    I am thinking about ...
    When user press the export button, then
    - export runs
    - all objects are disabled
    When export is done, then
    - all objects are enabled
    Is there a smart way of disabling / enabling all objects at once, without explicitly referencing each one of them like field1.disbabled(), ...
    I am open also for other approaches.
    Thanks,A.

    Hi Kayaman,
    the approach with progress bar with modal dialog fits best to my need.
    I re-used the code from the following website ...
    http://www.java2s.com/Code/Java/Swing-JFC/Creatingamodalprogressdialog.htm
    Thanks, A.

  • How to disable 'Enable JavaScript' and 'Display PDF in browser' in Adobe Reader 9.1 msi?

    I'd like to how to disable 'Enable JavaScript' and 'Display PDF in browser' in Adobe Reader 9.1 msi.
    Any help would be appreciated.

    NeoChang:
    You can modify the installation package using the Adobe Customization Wizard to toggle the "Display PDF in Browser" but I have not found a setting to disable JavaScript from the Wizard. I have created a script which makes the changes, but it has to be run for every user since that info is stored in the User hive of the Windows registry.
    Disable JavaScript:
    REG ADD "HKCU\SOFTWARE\Adobe\Acrobat Reader\9.0\JSPrefs" /v bEnableJS /d 0 /t REG_DWORD /f
    Disable Browser Integration:
    REG ADD "HKCU\Software\Adobe\Acrobat Reader\9.0\Originals" /v bBrowserIntegration /d 0 /t REG_DWORD /f
    Michael
    ~Simplicity of Character is a Natural Result of Profound Thought~

  • My iphone icon shows in itunes but is missing from my computer desktop. It is detected as a iphone camera device. I have tried everything from unistalling-reinstalling, disabling-enabling, and updating. Still no iphone icon showing in my computer desktop.

    My iphone icon shows in itunes but is missing from my computer desktop. It is detected as a iphone camera device. I have tried everything from uninstalling-reinstalling, disabling-enabling, and updating. Still no iphone icon showing in my computer desktop. I have been troubleshooting this for 7 days with no luck! Please help?

    yes, I dony know what else to do?
    thanks

  • How to make Mvt allowed indicator editable in CJ20N transection ?

    Dear Experts,
    How to make Mvt allowed indicator editable in CJ20N transaction ,I want to control material issue by reservations,waiting for your suggestions.
    Thanks

    What is the object status? if the status is Started, you might have problems becouse that status does not permit cost assignments.
    As the previous reply, at the moment of the release, you will have this field editable.
    Best Regards.

  • I forgot my pass code and disabled my iPad

    I Forgot my pass code and disabled my iPad I have no computers or laptops to connect to as it tells me to connect to iTunes I connected to a freinds computer and it told me to put in my pass code but I don't know what it is ?

    You may need to put the iPad into recovery mode in order to be able to reset it : http://support.apple.com/kb/ht1808
    If you don't have a backup then you won't be able to restore your content to it, but you might be able to re-download some/all of your purchases via the Purchases tabs in the iTunes and App Store apps, and the ibookstore in the iBooks app

  • How do I disable the Firefox allow page display

    How do I disable the Firefox allow page feature.
    when I click on allow, it completely knocks me out of the website in which i have to log in again.

    Uncertain of your question. If you are getting a re-direct to another page after signing in (common occurence after signing in) check the following setting:
    *''Firefox button > Options > Options (or Tools > Options) > Advanced > General (Accessibility section), '''<u>un-check</u>''' "Warn me when websites try to redirect or reload the page"''
    Advanced options panel - https://support.mozilla.org/en-US/kb/advanced-settings-browsing-network-updates-encryption<br />
    Link to other options panels - https://support.mozilla.org/en-US/kb/firefox-options-preferences-and-settings
    Other- You should check your plugins and update as needed.
    #Check your plugins - https://www.mozilla.org/en-US/plugincheck/
    #Seriously out of date and subject to known vulnerabilities - '''''Next Generation Java Plug-in 1.6.0_29 for Mozilla browsers'''''
    #*NOTE: Java 6 versions are scheduled for end of life (no more updates or support) in February 2013. You should probably update to Java 7 latest release.
    #*Update to lastest 1.6.41 or 1.7.15 from page below. '''''JRE version''''' for most users; '''''JDK version''''' for developers. '''''i586''''' for 32-bit browsers (Firefox is 32-bit)
    #*Download JRE version, save, close all browsers, run installer you just downloaded - http://www.oracle.com/technetwork/java/javase/downloads/index.html
    #*Also see - https://support.mozilla.org/en-US/kb/use-java-plugin-to-view-interactive-content

  • How to make disable/enable single item recovery effectively Immediately?

    for the following command , "it may take up to one hour to disable single item recovery",my question is how to make the disable/enable  single item recovery
    effectively Immediately by some command?
    SingleItemRecoveryEnabled $false/true
    http://technet.microsoft.com/en-us/library/ff678798(v=exchg.141).aspx
    Please click the Mark as Answer button if a post solves your problem!

    other options:
    Move the mailbox to another DB or if in a DAG, activate the DB on another server. ( the activating seems to work as far as I have seen at least).
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Maybe you are looking for