T.code to see the daily balance for 3 bank accounts at a time
HI
There are 3 banks ie. Andhra bank, SBI and CITI
The client want to see the todays balance in all accouns at a time
So which T.code is available to see the present balance
Regards,
Venkat
Hi
You can use the T Code FAGLB03 in ECC 6.0. However, this can be used specifically with your purpose only if all the three bank accounts are in continuation else the system will display balance of intermediary accounts also.
Assign points if the information is usefu;
Regards
Sanil Bhandari
Similar Messages
-
How to get the GL Daily Balances for an Account
Hi,
We need to create a report to see the daily balances (as at date) from 11i GL.
Our accounting periods are defined as calender months.
Ex: Account Combination X.XXX.XXXX.XXX Balance as at 11-AUG-09
Please let us know the tables which we need to query for this requirement.
Thanks!Hello Nilaksha.
You can use the following query. Modify the segment to be queried if you wish.
SELECT cc.segment1||'.'||segment2||'.'||segment3||'.'||segment4 "Account",
nvl(sum(l.accounted_dr - l.accounted_cr),0) "Balance"
FROM gl_code_combinations cc,
gl_je_lines l
WHERE cc.code_combination_id = l.code_combination_id
AND l.set_of_books_id = <your set_of_books_id'
AND cc.segment2 = 'your segment value'
AND l.effective_date <= '30-nov-09'
GROUP BY cc.segment1||'.'||segment2||'.'||segment3||'.'||segment4
Hope this helps.
Octavio -
How would one build a query to give daily balance across bank accounts? (to then plot in a graph)
Assumptions:
* There is a table TRANSACTIONS which includes columns TRANS_DATE, AMOUNT and BANK_ID. It does NOT include a column for balance. So current balance for a bank account is the sum of the AMOUNTs for that BANK_ID for example. Balance on date XX will be the sum
of all AMOUNTS for that BANK_ID for all TRANS_DATE's prior and including the date XX.
* There is not necessarily transactions on every day for each bank
* Table BANKS which has BANK_ID and TITLE
Would like a query that gives: Supply StartDate and EndDate for the query:
Date Bank1Balance Bank2Balance Bank3Balance TotalBalance
1/1/15 $100 $200 $100 $400
1/2/15 $200 $200 $100 $500
etcYou'll find examples of queries for computing balances in various contexts in Balances.zip in my public databases folder at:
https://onedrive.live.com/?cid=44CC60D7FEA42912&id=44CC60D7FEA42912!169
If you have difficulty opening the link copy its text (NB, not the link location) and paste it into your browser's address bar.
The queries in this little demo file return balances per transaction, however, whereas you appear to wish to return balances at close of business per day. This can easily be done by means of a subquery which sums all transactions to date. To return
balances for all dates regardless of whether or not any transactions have been undertaken on the day, an auxiliary calendar table can be introduced into the database to plug the gaps, The Calendar.zip file in my same OneDrive folder has means of generating
such a table.
With the introduction of an auxiliary calendar table into the database a query can then be written to return the balance per customer at close of business per day over the period 2009 - 2012 covered by the data in the Transactions table:
SELECT CustomerID, Firstname, LastName, calDate,
(SELECT SUM(TransactionAmount)
FROM Transactions
WHERE Transactions.CustomerID = Customers.CustomerID
AND Transactions.TransactionDate <= Calendar.calDate) AS Balance
FROM Calendar,Customers
WHERE calDate BETWEEN #2009-01-01# AND #2012-12-31#
ORDER BY CustomerID, CalDate;
Rows for each customer/date are returned by means of the Cartesian product of the Calendar and Customers tables (the latter analogous to your Banks table), and the subquery returns the balance at close of each day by correlating the Transactions table with
the Customers and Calendar tables, returning the sum of all transactions per customer up to and including the date in question. In this example credit and debit transactions are expressed as positive and negative values in a single column of course,
but where separate credit and debit columns are used its merely a case of summing (Credit-Debit), as done in some of the examples in my demo.
To return the data in a horizontal format per date I'd suggest the use of a report which returns one row per date, and within it a multi-column subreport in across-then down column layout, linking the subreport to the parent report on the date columns.
Ken Sheridan, Stafford, England -
New to Iphone ...purchased Music but don't see the charges in my bank account
I am a brand new iPhone 5 user; actually a brand new apple user. I purchased some music last night and this morning, but I don't see the charges showing as pending in my bank account. Do they not show up as pending? or do they accumulate for a few days or so and then are charged? or are they charged for each single purchase? Just wondering how this works.
http://ipod.about.com/od/itunesproblems/f/itunes-billing-delay.htm
-
Unable to see the gl balances in FS10N
Hi,
I am unable to see the gl balances in FS10n for the periods that were having the balances. I have activated the new GL and amounts that are posted only after activating the new GL are comming. What should I do to see the gL balances for all the periods before and after activating the new GL.
Please assist,
Thanks,
Shilpa.
Edited by: ashilpa54 on Jan 12, 2011 5:27 AMHello Shilpa,
You ahve activated the New Gl so your system Table get changed from GLT0 to FAGLFLEXT so what ever transaction has been performed after activation of new gl will be reflected.
i think U need to retrive the data from GLT0 and migrate those data to new GL then only the balances can appear.
Hope u ca understand........ -
How to query the opening balance for an specific account for an spec. date
Hi all,
for my user query I need to calculate the opening balance for an cash account for an specific date.
Any ideas, how can I do this?
Or may be you know a field in an SBO table that already contains information I need...
Best Regards,
InnaHi Inna,
to find the opening balance for an account or a business partner, please see SAP Note [1114253|https://service.sap.com/sap/support/notes/1114253] :
Symptom
How to find the opening balance of a business partner or G/L account.
Other terms
Account, customer, supplier, vendor, creditor, debitor, start, initial, first, opening balance, business partner, G/L, SAP Business One
Reason and Prerequisites
Consulting
Solution
There are several possible approaches:
Approach 1 - Business Partner Opening Balance:
1. Go to Business Partners -> Business Partner Master Data -> find the Business Partner
2. Click on the orange link arrow next to the field 'Account Balance' in the header region of the window.
3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
4. Click on the button 'Refresh'.
5. Find 'OB' in the column 'Origin', this is the opening balance journal entry.
Approach 2 - Business Partner Opening Balance:
1. Go to Business Partners -> Business Partner Master Data.
2. Click on the orange link arrow next to the field 'Account Balance' in the header region of the window.
3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
4. Click on the button 'Refresh'.
5. Double click on the column header 'Posting Date' to find the earliest transaction on the business partner account. This transaction could be opening balance, verify this with the company accountant.
Approach 3 - G/L Account Opening Balance:
1. Go to Financials -> Chart of Accounts -> click on the account name once.
2. Click on the orange link arrow next to the field 'Balance'.
3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
4. Click on the button 'Refresh'.
5. Find 'OB' in the column 'Origin', this is the opening balance journal entry.
Approach 4 - Business Partner and/or G/L Account Opening Balance:
1. If using SAP Business One 2005 SP01 or earlier, go to Reports -> Query Generator -> click on 'Execute'.
2. If using SAP Business One 2007 or later, go to Tools -> Queries -> Query Generator -> click on 'Execute'.
3. Ignore the red system message in the bottom of the screen.
4. Click on the pencil icon in the top left of the window, the field with 'SELECT *' will change colour to white, then yellow when activated by clicking in the field.
5. Copy the query below:
SELECT T0.[TransId], T0.[Debit], T0.[Credit] , T0.[CreatedBy], T0.[TransType] FROM [dbo].[JDT1] T0 WHERE T0.[TransType] = '-2' and T0.[ShortName] = '[%1]'
6. Click on 'Save' and give the query an appropriate name and select the appropriate category.
7. Click on 'Execute'.
8. Click on 'Existing Values'.
9. Select the G/L account or the Business Partner name from the list and click on 'OK'.
10. The system message 'Records retrieved by this query #' (# = number of records) will pop up. Click on 'OK'.
All the best,
Kerstin -
Check GL(Bank) account balance for banks and stop payment if sufficient
Hi Experts
Requirement is to check GL account balance for bank account and check whether enough balance exists for effecting payments. In the absence of insufficient bank balance, payment should not be effected. Balance needs to be check either manual cheque payment or automatic payment program.
Please provide best solution.
RegardsHi,
Requirement is very clear,
this is critical requirement, normal situation nobady update values in Available amount every day in FBZP
If you want to impliment this reqirement, discuss with technical person (ABAPer) to impliment BADI functionality.
As a functional consultant you have to tell the technical person,
1 - Create Z internal maintanance table. for house bank & Company code againest available amount.
2 - During payment (FB01,F-53,F-48,F-58 & F110) system need to Compare table Vendor open Item (BSIK) and Z teble balances, if Z table balance is less than table (BSIK) value system stop the process else system process for payment.
for better clarification discuss with technical expert.
Regards,
Viswa -
I want to keep track of a running balance for a account
I would like to keep a running balance for a account, I would like to be able to add a new amount whenever there is a new transaction and be shown what the new balance for that account is. I am sure that this is simple to do and i can do it the long way however a shortcut would be greatly appreciated, if there is already a thread that answers this question, please point me in the right direction.
See this thread, among others. "Running totals" is another way you might search.
SG -
Hi all,
I have TFS2012 and run several projects.
We encounterwed with such an error while using Build server.
Overall Build Process
Initial Property Values
AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
BinariesSubdirectory =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MSBuildArguments =
MSBuildPlatform = Auto
RecursionType = OneLevel
SourcesSubdirectory =
TestResultsSubdirectory =
Verbosity = Diagnostic
00:00
Get the Build
00:00
Update Build Number
Initial Property Values
BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
Final Property Values
BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
Result = Ephone_DIT_Deploy_20150424.1
01:56
Run On Agent (reserved build agent U4VMDWODBDEV03 - Agent1)
Initial Property Values
MaxExecutionTime = 00:00:00
MaxWaitTime = 04:00:00
ReservationSpec = Name=*, Tags=
00:00
Get the Build Directory
Initial Property Values
Result = d:\temp\217\CTI\Ephone_DIT_Deploy
01:53
If Not String.IsNullOrEmpty(ConfigurationFolderPath)
Initial Property Values
Condition = True
01:53
Run TfsBuild for Configuration Folder
Initial Property Values
BinariesSubdirectory =
BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
CommandLineArguments =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MaxProcesses = 1
NodeReuse = False
RecursionType = OneLevel
SourcesSubdirectory =
TargetsNotLogged =
TestResultsSubdirectory =
ToolPath =
ToolPlatform = Auto
Verbosity = Diagnostic
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\MSBuild.exe /nologo /noconsolelogger "d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TFSBuild.proj" /m:1 /nr:False "@d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TfsBuild.rsp"
00:08
Getting sources
00:02
Labeling sources
00:19
Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileConfiguration.
00:19
Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileSolution.
00:19
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.sln for default targets.
00:05
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:10
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:05
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Workflow.Targets (121): Compilation failed. Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneMarcomApplication/EPhoneMarcomApplication.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallbackApplication/EPhoneCallbackApplication.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneQueView/EPhoneQueView.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.Runner/Ephone.Tests.Runner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneIDD/EPhoneIDD.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegratorTest/ChannelIntegratorTest.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
MSBuild Log File
00:08
Generating list of changesets
00:20
Built Skins\SkinEPhone.cs for default targets.
Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): The "CreateNewWorkItem" task failed unexpectedly.
Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemTypeDeniedOrNotExistException: TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
at Microsoft.TeamFoundation.Build.Tasks.WorkflowTask.ExecuteInternal()
at Microsoft.TeamFoundation.Build.Tasks.Task.Execute()
at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
at Microsoft.Build.BackEnd.TaskBuilder.<ExecuteInstantiatedTask>d__20.MoveNext()
00:03
Creating work item
Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)
Exception Stack Trace: at System.Activities.Statements.Throw.Execute(CodeActivityContext context)
at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
Final Property Values
BinariesSubdirectory =
BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
CommandLineArguments =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MaxProcesses = 1
NodeReuse = False
RecursionType = OneLevel
SourcesSubdirectory =
TargetsNotLogged =
TestResultsSubdirectory =
ToolPath =
ToolPlatform = Auto
Verbosity = Diagnostic
Final Property Values
Condition = True
Final Property Values
MaxExecutionTime = 00:00:00
MaxWaitTime = 04:00:00
ReservationSpec = Name=*, Tags=
Result = U4VMDWODBDEV03 - Agent1 (vstfs:///Build/Agent/217)
Final Property Values
AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
BinariesSubdirectory =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MSBuildArguments =
MSBuildPlatform = Auto
RecursionType = OneLevel
SourcesSubdirectory =
TestResultsSubdirectory =
Verbosity = Diagnostic
Please have a look and guide where to find a problem
Thanks aheadHi Hooi,
I'd like to know whether you can build successfully in your local machine with MSBuild. You have to build succeed with MSBuild beore you can build with TFS Build since TFS build use MSBuild as its default compiler.
From the error message, you might build with wrong platform for your project. Please check if the build platfrom is proper. If you have customization of your build process template, it would be better to elaborate the reproduce steps and customization details.
Best regards, -
Table Name to see the Document Flow for Service Order - T. Code IW33?
Hi,
can u advise the Table Name to see the Document Flow for Service Order - T. Code IW33?
Ravi.Hi,
From SERVICE ORDER you cant get the INVOCIE NUMBER,
You will get the SALES ORDER number for that Service order in QMEL table and fetch the Sales order and then goto VBFA to get the Invoice number for the sales order with the DOCUMENT CATEGORY M.
hope it will serve you.
thanks,
santosh -
How to see the customer balance as on particular date wise
hello expert,
i want to see the customer balance as on particular date wise. i have already search the given standard t code. is there any option to see the report. please advice me.
Thanks and regards
konishko
Moderator: Search SDNHi,
Please try reports S_ALR_87012168/S_ALR_87012174.
Regards,
SAPFICO -
What are the T-codes that contain the master data for material and vendor?
what are the T-codes that contain the master data for material and vendor?
hi ,
- Display Material tcodes...
MM01 - Create Material
MM02 - Change Material
MM03 - Display Material
MM50 - List Extendable Materials
MMBE - Stock Overview
MMI1 - Create Operating Supplies
MMN1 - Create Non-Stock Material
MMS1 - Create Service
MMU1 - Create Non-Valuated Material
ME51N - Create Purchase Requisition
ME52N - Change Purchase Requisition
ME53N - Display Purchase Requisition
ME5A - Purchase Requisitions: List Display
ME5J - Purchase Requisitions for Project
ME5K - Requisitions by Account Assignment
MELB - Purch. Transactions by Tracking No.
ME56 - Assign Source to Purch. Requisition
ME57 - Assign and Process Requisitions
ME58 - Ordering: Assigned Requisitions
ME59 - Automatic Generation of POs
ME54 - Release Purchase Requisition
ME55 - Collective Release of Purchase Reqs.
ME5F - Release Reminder: Purch. Requisition
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MBRL - Return Delivery per Mat. Document
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB1B - Transfer Posting
MIBC - ABC Analysis for Cycle Counting
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI21 - Print physical inventory document
MI04 - Enter Inventory Count with Document
MI05 - Change Inventory Count
MI06 - Display Inventory Count
MI09 - Enter Inventory Count w/o Document
MI34 - Batch Input: Enter Count
MI35 - Batch Input: Post Zero Stock Balance
MI38 - Batch Input: Count and Differences
MI39 - Batch Input: Document and Count
MI40 - Batch Input: Doc., Count and Diff.
MI08 - Create List of Differences with Doc.
MI10 - Create List of Differences w/o Doc.
MI20 - Print List of Differences
MI11 - Physical Inventory Document Recount
MI07 - Process List of Differences
MI37 - Batch Input: Post Differences
for vendor..
XKN1 Display Number Ranges (Vendor)
XK01 Create vendor (centrally)
XK02 Change vendor (centrally)
XK03 Display vendor (centrally)
XK04 Vendor Changes (Centrally)
XK05 Block Vendor (Centrally)
XK06 Mark vendor for deletion (centrally
XK07 Change vendor account group
XK11 Create Condition
XK12 Change Condition
XK13 Display Condition
XK14 Create with cond. ref. (cond. list)
XK15 Create Conditions (background job)
reward points if useful,
venkat. -
I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
Error: Sub report cannot be shown.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
Any Suggestion/feedback is highly appreciated.
Thank You.
The code of the sample RDL is shown below:
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>DataSource1</DataSourceReference>
<rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
</DataSource>
</DataSources>
<BottomMargin>0.25in</BottomMargin>
<RightMargin>0.25in</RightMargin>
<PageWidth>11in</PageWidth>
<ReportParameters>
<ReportParameter Name="machine_id">
<DataType>String</DataType>
<Prompt>machine_id</Prompt>
</ReportParameter>
<ReportParameter Name="from_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>From Date</Prompt>
</ReportParameter>
<ReportParameter Name="to_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>To Date</Prompt>
</ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
<ReportItems>
<Table Name="table1">
<DataSetName>Main_Report</DataSetName>
<TableGroups>
<TableGroup>
<Header>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Textbox Name="textbox2">
<rd:DefaultName>textbox2</rd:DefaultName>
<ZIndex>1</ZIndex>
<Style>
<TextAlign>Left</TextAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingBottom>2pt</PaddingBottom>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<CanGrow>true</CanGrow>
<Value>=Fields!syscode.Value</Value>
</Textbox>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
<RepeatOnNewPage>true</RepeatOnNewPage>
</Header>
<Grouping Name="table1_Group1">
<PageBreakAtEnd>true</PageBreakAtEnd>
<GroupExpressions>
<GroupExpression>=Fields!syscode.Value</GroupExpression>
</GroupExpressions>
</Grouping>
</TableGroup>
</TableGroups>
<Details>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Subreport Name="subreport1">
<Parameters>
<Parameter Name="machine_id">
<Value>=Fields!machine_ip.Value</Value>
</Parameter>
<Parameter Name="syscode">
<Value>=Fields!syscode.Value</Value>
</Parameter>
<Parameter Name="from_date">
<Value>=Parameters!from_date.Value</Value>
</Parameter>
<Parameter Name="to_date">
<Value>=Parameters!to_date.Value</Value>
</Parameter>
</Parameters>
<ReportName>Holding_Summary_Multi_Period</ReportName>
</Subreport>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
</Details>
<TableColumns>
<TableColumn>
<Width>10.5in</Width>
</TableColumn>
</TableColumns>
<Height>0.5in</Height>
</Table>
</ReportItems>
<Height>0.75in</Height>
</Body>
<rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
<LeftMargin>0.25in</LeftMargin>
<DataSets>
<DataSet Name="Main_Report">
<Query>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
<CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
where machine_ip = @machine_id</CommandText>
<QueryParameters>
<QueryParameter Name="@machine_id">
<Value>=Parameters!machine_id.Value</Value>
</QueryParameter>
</QueryParameters>
<DataSourceName>DataSource1</DataSourceName>
</Query>
<Fields>
<Field Name="syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>syscode</DataField>
</Field>
<Field Name="display_name">
<rd:TypeName>System.String</rd:TypeName>
<DataField>display_name</DataField>
</Field>
<Field Name="customer_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>customer_syscode</DataField>
</Field>
<Field Name="account_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>account_syscode</DataField>
</Field>
<Field Name="machine_ip">
<rd:TypeName>System.String</rd:TypeName>
<DataField>machine_ip</DataField>
</Field>
</Fields>
</DataSet>
</DataSets>
<Code>Shared offset As Integer
Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
If reset
offset = pagenumber - 1
End If
Return pagenumber - offset
End Function
</Code>
<Width>10.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<PageFooter>
<ReportItems>
<Image Name="image1">
<Sizing>Fit</Sizing>
<Left>8.875in</Left>
<MIMEType />
<Width>1.5in</Width>
<Source>External</Source>
<Style />
<Value>bottom_right_logo.gif</Value>
</Image>
</ReportItems>
<Height>0.5in</Height>
<PrintOnLastPage>true</PrintOnLastPage>
<PrintOnFirstPage>true</PrintOnFirstPage>
</PageFooter>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
</Report>i created a SSRS report with shared datasets and uploaded rdl files and rsd files , while trying to map rdl file with data sets i am getting an error
when i click on manage for .rdl file, its throwing error , as
"An internal error occurred on the report server. See the error log for more details. (rsInternalError)
Object reference not set to an instance of an object.
please help me with this -
T-code to see the report generated by a Report Writer.
Hi,
I am new to report writer and need your help.
I have a output which is generated through a report writer.
I need to compare the code that generated this output in development and production systems.
The only information I have is the library name and a z report name which gives the output.(throgh t-code GR33)
But when I try to execute the same report in Se 38, it says that te report does not exists .
Please suggest what is the t-code to see the report generated by a report writer , so that I can compare the codes in different systems.
Thanks,
Suchi.Hi,
Thanks for the replies.
The actual issue is :
I have a report created by report writer in 2 languages in Chineese and in English.
In the selection screen of the chineese report some of the labels are missing.
It is getting printed as ####### instead of fiscal year , Period etc.
This is happening only in production while in the development system it is correct (Both the chineese and the English selection screen ).
I guess this is a transportation issue.
Please suggest.
I am ot able to see the Transport Requests associated with it .
Can you please guide me for the same.
Where can I see the TRs associated with this report. -
I get this exception (and long stack trace) when attempting to start my weblogic server. I'm running Weblogic 7 with Portal 7 (sp 1). I'm using Oracle 8.1.7. I upgraded this application from weblogic portal 4.0, and never had this problem there. As part of the migration process, I ran the tool to migrate all of the database tables, and I re-synched the EBCC project using version 7 of EBCC. I did a search for this problem and found a few mentions of it that seemed to be related to Oracle's handling of CLOB data. Apparently, there is a patch, but I can't seem to find this patch. I'm also not sure if this is indeed the problem since I didn't have this issue with the older version of weblogic using the same database. Any suggestions?
If you have a support contract please open a case so we can work through
this problem.
Can you run an sqlplus session on your database, execute the commands
"delete from data_sync_item" and "commit", then resync to see if it will
get you around the problem. The data_sync_item table will be fully
populated after you sync. This should get you running.
Between 4.0 and 7.0 the DefaultRequestPropertySet.req file was reduced
in size -- the CLOB would be smaller in the data_sync_item table.
I would recommend using the Version Checker against your installation --
find it on the dev2dev.bea.com site to see if the upgrade installer work
ed properly. Also consider running the full installer to avoid possible
problems that might occur with upgrade installers.
As a result of that patch you referenced in 4.0 the CLOB handling logic
was changed in 7.0 -- this is why it is strange you are seeing cleaving
errors. In 7.0 SP2 to be release next week the data sync and
persistence code was changed also.
Are you using the OCI or Thin driver?
-- Jim
Rob Goldie wrote:
Jim Litton <replyto@newsgroup> wrote:
Rob,
The CLOB issue was related to wlportal4.0 and should not be a factor
in
7.0.
Could you post the entire stack trace?
####<Jan 27, 2003 4:21:47 PM EST> <Warning> <Data Synchronization> <PFIDEV5> <pfeAricept1Server>
<main> <kernel identity> <> <000000> <Application: gmiAriceptApp; Failed to retrieve
a schema URI (document namespace) for /request/DefaultRequestPropertySet.req;
please see the following exception for details.>
Exception[com.bea.p13n.management.data.doc.DocumentProcessingException: Unable
to analyze and/or cleave document]
at com.bea.p13n.management.data.doc.cleaver.CleavingDocumentProcessor.process(CleavingDocumentProcessor.java:94)
at com.bea.p13n.management.data.repository.internal.DataItemImpl.getSchemaUri(DataItemImpl.java:136)
at com.bea.p13n.management.data.repository.DataRepositoryFactory.createDataItem(DataRepositoryFactory.java:363)
at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.createDataItems(JdbcDataSource.java:523)
at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.refresh(JdbcDataSource.java:442)
at com.bea.p13n.management.data.repository.persistence.ReadOnlyJdbcPersistenceManager.refresh(ReadOnlyJdbcPersistenceManager.java:107)
at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.<init>(AbstractDataRepository.java:193)
at com.bea.p13n.management.data.repository.internal.MasterDataRepository.<init>(MasterDataRepository.java:46)
at com.bea.p13n.management.data.repository.DataRepositoryFactory.getMasterDataRepository(DataRepositoryFactory.java:255)
at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl.ejbCreate(PlaceholderServiceImpl.java:191)
at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl_9p0jz2_Impl.ejbCreate(PlaceholderServiceImpl_9p0jz2_Impl.java:117)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.java:151)
at weblogic.ejb20.pool.Pool.createInitialBeans(Pool.java:188)
at weblogic.ejb20.manager.StatelessManager.initializePool(StatelessManager.java:380)
at weblogic.ejb20.deployer.EJBDeployer.initializePools(EJBDeployer.java:1472)
at weblogic.ejb20.deployer.EJBDeployer.start(EJBDeployer.java:1367)
at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:864)
at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:81)
at weblogic.j2ee.Application.addComponent(Application.java:294)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:164)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:303)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:256)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:207)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:732)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:714)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:417)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:926)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:470)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:198)
at $Proxy9.updateDeployments(Unknown Source)
at weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(ServerMBean_CachingStub.java:4060)
at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:2259)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:373)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:235)
at weblogic.t3.srvr.ServerLifeCycleList.resume(ServerLifeCycleList.java:61)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:806)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
at weblogic.Server.main(Server.java:32)
Caused by: org.xml.sax.SAXException: No message available. Resource not found:
repository.cleaver.no.xsi.namespace.exception Resource bundle: com/bea/p13n/management/data/datasync
at com.bea.p13n.management.data.doc.cleaver.DocumentCleaver.mapNamespaces(DocumentCleaver.java:135)
at com.bea.p13n.management.data.doc.cleaver.DocumentCleaver.startElement(DocumentCleaver.java:235)
at weblogic.apache.xerces.parsers.SAXParser.startElement(SAXParser.java:1384)
at weblogic.apache.xerces.validators.common.XMLValidator.callStartElement(XMLValidator.java:1299)
at weblogic.apache.xerces.framework.XMLDocumentScanner.scanElement(XMLDocumentScanner.java:1821)
at weblogic.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumentScanner.java:964)
at weblogic.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:396)
at weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:1119)
at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:135)
at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:133)
at com.bea.p13n.management.data.doc.cleaver.CleavingDocumentProcessor.process(CleavingDocumentProcessor.java:80)
at com.bea.p13n.management.data.repository.internal.DataItemImpl.getSchemaUri(DataItemImpl.java:136)
at com.bea.p13n.management.data.repository.DataRepositoryFactory.createDataItem(DataRepositoryFactory.java:363)
at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.createDataItems(JdbcDataSource.java:523)
at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.refresh(JdbcDataSource.java:442)
at com.bea.p13n.management.data.repository.persistence.ReadOnlyJdbcPersistenceManager.refresh(ReadOnlyJdbcPersistenceManager.java:107)
at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.<init>(AbstractDataRepository.java:193)
at com.bea.p13n.management.data.repository.internal.MasterDataRepository.<init>(MasterDataRepository.java:46)
at com.bea.p13n.management.data.repository.DataRepositoryFactory.getMasterDataRepository(DataRepositoryFactory.java:255)
at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl.ejbCreate(PlaceholderServiceImpl.java:191)
at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl_9p0jz2_Impl.ejbCreate(PlaceholderServiceImpl_9p0jz2_Impl.java:117)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.java:151)
at weblogic.ejb20.pool.Pool.createInitialBeans(Pool.java:188)
at weblogic.ejb20.manager.StatelessManager.initializePool(StatelessManager.java:380)
at weblogic.ejb20.deployer.EJBDeployer.initializePools(EJBDeployer.java:1472)
at weblogic.ejb20.deployer.EJBDeployer.start(EJBDeployer.java:1367)
at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:864)
at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:81)
at weblogic.j2ee.Application.addComponent(Application.java:294)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:164)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:303)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:256)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:207)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:732)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:714)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:417)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:926)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:470)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:198)
at $Proxy9.updateDeployments(Unknown Source)
at weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(ServerMBean_CachingStub.java:4060)
at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:2259)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:373)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:235)
at weblogic.t3.srvr.ServerLifeCycleList.resume(ServerLifeCycleList.java:61)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:806)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
at weblogic.Server.main(Server.java:32)
Are you using a UTF-8 Oracle database?
Yes
If you create a new User Profile in the EBCC and compare it to your
migrated .usr file do you see differences in the DTD's?
I recreated a new version of the .usr in the EBCC, and still got the same error.
I also tried deleting everything from the data-sync-item table and re-synching.
What does the DocumentManager section of your application-config.xml
look like?
<DocumentManager
ContentCacheName="documentContentCache"
ContentCaching="true"
DocumentConnectionPoolName="default"
MaxCachedContentSize="32768"
MetadataCacheName="documentMetadataCache"
MetadataCaching="true"
Name="default"
PropertyCase="none"
UserIdInCacheKey="false"
/>
What does the document.jar Targets="" parameter look like in config.xml?
<EJBComponent Name="document" Targets="pfeCluster" URI="document.jar"/>
-- Jim
Rob Goldie wrote:
I get this exception (and long stack trace) when attempting to start
my weblogic server. I'm running Weblogic 7 with Portal 7 (sp 1). I'm
using Oracle 8.1.7. I upgraded this application from weblogic portal
4.0, and never had this problem there. As part of the migration process,
I ran the tool to migrate all of the database tables, and I re-synched
the EBCC project using version 7 of EBCC. I did a search for this problem
and found a few mentions of it that seemed to be related to Oracle's
handling
of CLOB data. Apparently, there is a patch, but I can't seem to find
this patch. I'm also not sure if this is indeed the problem since I
didn't have this issue with the older version of weblogic using the
same database. Any suggestions?
Maybe you are looking for
-
How Do I Add A Title To My Outline?
Sick of MS WORD so I broke down and bought PAGES this morning. So far I like it, but I was most excited about using the Outline Mode, however I'm trying to add a title to my outline, but I can only make it one of the actual bullet points. Anyone know
-
Please help me activate my cs3
I had previuosly used bthe cs3 on my buisness laptop , but it was deactivated and now I am tryiong to install on my new ASUS computer
-
I have several SEO add-ons that create google 'CAPTCHA' how do I prevent this?
I use: Foxy SEO SEOQuake RDS Bar One of these (I've disabled RDS but still getting CAPTCHA so not this one) is creating thre CAPTCHA request for all computers using the internet on this IP address, how do I continue to use these Add-ons without the C
-
AS 8.1 error while accessing the instance
Hi all, I am having the following error: Expected pre-compiled classname: 'org .apache.jsp.jsp.serverInstance_jsp' The root cause is "java.net.SocketTimeoutException: Read Timed out Any clues. Thanks, Scotty
-
LOV in tabular form-Apex 4.0
Hi I am creating a wizard based tabular form in Apex 4.0 and my scenario is like I have a deptno column in my form and i want the employees for that particular dept in the ename select list. I know that it can be done with manual tabular form. But si