T410 - How to show 1280X800 Resolution on a 4:3 LCD?
Hello,
I have a T410 that's running Windows XP. I have a 19" LCD which is 4:3 format, and I want to acheive the following:
I want to have a resolution of 1280X800 (i.e. 16:9 aspect ratio) that's when connected to the external LCD, keeps the same resolution and shows black bars on the top and bottom (i.e. does not stretch the image).
How can I do that?
Thanks,
Ronen
Called Apple support, turned out to be a corrupt preference file; I renamed the preferences folder & rebooted & that resolved the issue. Now have to rebuild / copy back my old preferences...
Similar Messages
-
How to get 1280x800 resolution on VirtualBOX?
Hello, I have a 1280x800 monitor, and I can't get Virtualbox to fit into my resolution window correctly. With vmware I could do it. Is there any way to perform that?
GreetingsYou can do it from a host console.
Start the guest, and then type in the host console
vboxmanage controlvm "put-your-guest-name-here-without-the-quotes" setvideomodehint "1280" "800" "24"
I believe it has to be done just once, but can't confirm- still using VMWare on my laptop.
Last edited by scarecrow (2007-07-25 09:05:59) -
How to do screen resolution in session method
hi guru how to do screen resolution in session method.
please tell me.
regards
subhasisSometime back this is refered in SDN :
Check table <i>CTU_PARAMS</i> and field <i>DEFSIZE</i> for setting fixed line of table control.
CALL TRANSACTION 'VA01' USING it_bdcdata
OPTIONS FROM OPT
MESSAGES INTO it_mesg.
opt of type ctu_params.
WA_CTU_PARAMS-DISMODE = 'N'. "no screen mode
WA_CTU_PARAMS-UPDMODE = 'S'. "synchronus update
WA_CTU_PARAMS-NOBINPT = 'X'.
WA_CTU_PARAMS-NOBIEND = 'X'.
WA_CTU_PARAMS-DEFSIZE = 'X'. "Default size
Default size will play good role in terms of resoultion. in one system in table control you can see 10rows, but in others system it will show 20 records. it depends on resoultion. but when you set the default size then it will take same (default screen size) in all the systems when you run BDC.
Thanks!! -
How to get better resolution on graphical borders in Pages?
When using the «line effect» on a picture frame and choose a «image border», these borders a very pixelated and low resoltion when i.e. printing on a quality printer. Seems to be only screen resolution (100-150 dpi)? Is this a bug in Pages – how to get better resolution for these borders when exporting for example to PDF?
Here you see the issue. The Document's size is A6 landscape, means 14.8x10.5 cm, and it prints and shows really pixelated
-
How to find the resolution of media files in mac
how to see the resolution of media files in mac?
WIndows show the resolution when putting the mouse over the file.Hi Austin
I should have describe more clearly.
What I mean is for video files, I cannot see the resloution of the file. For example, 1980x1080 or 1080x720 so on
Sometimes they do show -
How can I increase resolution when burning a dvd with elements 11 premiere
How can I increase resolution when burning a dvd with elements 11 premiere
I am trying to generate a slide show DVD....the pictures on the TV are poor qualityWelcome to the forum.
As Steve points out, a DVD-Video is set in resolution, to 720 x 480 (for NTSC), in either Standard 4:3, or Widescreen 16:9. That is as good as it can get, and is not a limitation of PrE, but of the DVD-Video specs, which were written a long time ago.
The best that one can get is to play that DVD-Video on an up-rezzing DVD player, or most BD players, that also have up-rezzing, to an HD TV monitor. Those players have dedicated chips, JUST for up-rezzing.
Then, and per Peru Bob's questions, I attain the ultimate Still Images to DVD-Video, by doing my Scaling in Photoshop, and using either the Bicubic Sharper, or Bicubic Smoother Scaling algorithms. I Scale my Camera RAW Images to match my Project's Frame Size, and Crop, where necessary to match the Aspect Ratio of my Images, to the Aspect Ratio of the Project, i.e. if going to a 16:9 Widescreen, I will lose some pixels top and bottom, but I account for that, per my asesthetic.
Note: some PrE users insist that the Scaling in PrE is as good as Photoshop's, but my critical eyes point to using PS. Also, I do NOT use JPEG, which is a lossy, compressed format, and will Save_As PSD from Photoshop, for ultimate quality.
Good luck, and please let us know the pixel x pixel dimensions of your Images.
Hunt -
How to show more than one record at a form-like style report?
Hi All,
I developed a form-like style report
I want it to show more than one record at once (At the same page)
I tried that by setting the value to "Maximum records per page" property for the repeating frame to 10
but when I close the property palete and open it agian the value is returned to 1 !!!
how to show more than one record at the same page?????
Thank uHi,
there's perhaps another property like "page protect". If than 2 records didn't fit at one page there's a page break. Or is there any object inside the repeating frame with page-break properties? Sorry .. it's like looking into a chrystal ball ...
Regards
Rainer -
How to show custom error message in WebADI Excel template?
Hi,
I've created a custom Web ADI integrator and associated it with a 'Procedure' based custom interface.
WebADI Interface API Returns is set to "Error Message".
I'm using raise_application_error(-20001, "Actual Error Message") for invalid rows,but custom error message from PL/SQL is not populated on the excel template.
Instead it is showing "SQL exception occurred during PL/SQL upload".
Am I missing anything? How to show custom error message from Pl/SQL procedure to WebADI Excel template?
TIA
NarasimhaThe custom API errors are visible in the BNE log but not on the Excel.
BNE Log=>
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR BnePLSQLUpload.doUpload: Exception while uploading to PL/SQL API. Error Code: 20001, Message: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR BnePLSQLUpload.doUpload: Stack trace: java.sql.SQLException: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:202)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1005)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1307)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3449)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3550)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4710)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.bne.integrator.upload.BnePLSQLUpload.doUpload(BnePLSQLUpload.java:284)
at oracle.apps.bne.integrator.upload.BneSAXUploader.processDeepestLevel(BneSAXUploader.java:2346)
at oracle.apps.bne.integrator.upload.BneSAXUploader.startElement(BneSAXUploader.java:1182)
at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:181)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1288)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:234)
at oracle.apps.bne.integrator.upload.BneUploader.processUpload(BneUploader.java:301)
at oracle.apps.bne.integrator.upload.BneAbstractUploader.processUpload(BneAbstractUploader.java:114)
at oracle.apps.bne.integrator.upload.async.BneAsyncUploadThread.run(BneAsyncUploadThread.java:140)
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 WARNING BneOracleWebAppsContext.getTimeZone CLIENT_TIMEZONE_ID has not been set
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 ERROR BneOracleWebAppsContext.getExtraJDBCConnection recieved the same connection as the base connection. There may be transaction problems.
How to show the same error in the excel template?
Here is the package:
CREATE OR REPLACE PACKAGE BODY APPS.XXPO_COSTFACTS_WEBADI_PKG
AS
PROCEDURE upload_data (
P_CONTAINER_ID IN VARCHAR2
, P_SAIL_DATE IN DATE
, P_PO_NO IN VARCHAR2
) IS
--declare
lv_err_msg VARCHAR2(240);
lf_err_flag NUMBER := 0;
ln_temp NUMBER;
BEGIN
--------------------- checking for mandatory parameters---------------------------
IF (P_CONTAINER_ID IS NULL) THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg||'-'||'Please enter CONTAINER_ID - ';
END IF;
-------------Validation for Sail Date Format----------------------
IF (P_SAIL_DATE IS NULL) THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' ' || 'Enter Sail Date - ';
ELSE
BEGIN
SELECT 1
INTO ln_temp
FROM DUAL
WHERE P_SAIL_DATE = TO_DATE (TO_CHAR (P_SAIL_DATE, 'DD-MON-YYYY'), 'DD-MM-YYYY');
EXCEPTION
WHEN NO_DATA_FOUND THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format';
WHEN OTHERS THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format'|| SQLERRM;
END;
END IF;
-------------Validation for PO_Number----------------------
IF (P_PO_NO IS NULL) THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' ' || 'Enter PO_NO - ';
ELSE
BEGIN
SELECT count(1)
INTO ln_temp
FROM PO_HEADERS
WHERE Attribute4 = P_PO_NO;
EXCEPTION
WHEN NO_DATA_FOUND THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' No Oracle PO for Biceps PO#'||P_PO_NO;
WHEN OTHERS THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' Error getting the Oracle PO for Bicpes PO#'||P_PO_NO||' Error-' || SQLERRM;
END;
END IF;
-----------------------Insert Record----------------------------
IF lv_err_msg is NULL THEN
BEGIN
INSERT
INTO XXP2P_HW_COST_FACTORS_STG
CONTAINER_ID
,SAIL_DATE
,PO_NO
, ERROR_FLAG
, ERROR_MSG
,CREATED_BY
,CREATION_DATE
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
,LAST_UPDATE_LOGIN
VALUES
P_CONTAINER_ID
,P_SAIL_DATE
,P_PO_NO
,lf_err_flag
,lv_err_msg
,FND_GLOBAL.USER_ID
, trunc (sysdate)
,FND_GLOBAL.USER_ID
, trunc (sysdate)
,FND_GLOBAL.LOGIN_ID
-- commit;
DBMS_OUTPUT.put_line
'-' || 'After ap_invoices_interface'
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' ' || 'error loading CONTAINER_ID-' || P_CONTAINER_ID || SQLERRM;
raise_application_error(-20001, lv_err_msg);
END;
ELSE
raise_application_error(-20001, lv_err_msg);
END IF;
END upload_data;
END XXPO_COSTFACTS_WEBADI_PKG; -
How to show modal window without popup in a web page using javascript
Hi,
How to show modal window without popup in a web page using javascript, means when the modalwindow is opened it should not ask for popup blocker alert......
pls help me.....Thanx for ur reply,
Actually the senario is when i click on a button, another jsp page should be displayed in a modal window without popup, but the functions alert() and confirm() will not accept the url path of the another jsp page... -
How to show "ALL" Values by default in Page Drop-Down Lists in Pivot Tables
Hi Everyone,
Iam stuck with 1 problem please can any 1 help me if u know the solution.
Here is my problem:
How to show "ALL" Values by default in Page Drop-Down Lists in Oracle BI Pivot Tables?
For example, if you place Region in the pages area, a Region drop-down list allows the user to select a particular region, and see the data for only that region, rather than seeing all the Regions,But by default its not showing "ALL" option in the drop down list ,rather than doing that its showing result for only 1 region by default.
And an other problem with this pages area is, if we palce the multiple attributes in the Pages area in the pivot table, the (Fields)result is showing in vertically, the attributes 1 by 1(Every attribute in a new line) ,rather than showing like that, is there any way to show the results in horizantally?(We want to have it as a seperate drop drown list for every field horizantally not as a concatenated list).Thanks Nikhil. But I am fetching the values from the LOVCache.java.
I am using <af:selectManyChoice>. Is there any way I can use LOVCache.java value for selecting default values instead of hard coding?
I mean to say can I write
unselectedLabel="#{LOVCache.entityTypeSelectionList.anyValue}"
where LOVCache.entityTypeSelectionList is used to populate the drop down box.
Regards,
Aseet -
On 11in Macbook Air (10.10), how do I increase resolution of built-in display to 2560 by 1600 pixels?
It can be accomplished when an external display is connected, so I expect it can be done without an external display.You're getting full native resolution 1366 x 768 on your internal display, nothing more.
http://www.apple.com/macbook-air/specs.html
April 2014 11" MacBook Air Specs:
DISPLAY: 11.6-inch (diagonal) LED-backlit glossy widescreen display with support for millions of colors
Supported resolutions:
1366 by 768 (native), 1344 by 756, and 1280 by 720 pixels at 16:9 aspect ratio; 1152 by 720 and 1024 by 640 pixels at 16:10 aspect ratio; 1024 by 768 and 800 by 600 pixels at 4:3 aspect ratio
GRAPHICS & VIDEO SUPPORT:
Intel HD Graphics 5000
Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on an external display, both at millions of colors
http://www.everymac.com/systems/apple/macbook-air/specs/macbook-air-core-i7-1.7- 11-early-2014-specs.html -
How to show all view tab (Main Report and all Sub Report) in Visual FoxPro 9
I use ActiveX from Crystal Report Developer XI for viewer in Visual FoxPro 9 and I already know how to show Main Report by using command:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Inside the MyReport.rpt there is two subreport name :
1. MySubReport1
2. MySubReport2
My Question is :
How to show all view tab (Main Report and all Sub Report) at the 1st time we call ViewReport?
I try to using command :
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptSub=oRptOpen.OpenSubreport("MySubReport1")
oRptSub=oRptOpen.OpenSubreport("MySubReport2")
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
but only show Main Report (view tab name : Preview)?
Did I miss any command before I call oRptView.ViewReport?Your right, there is only one tab to view the report.
To open the subreports you will need to click on them in the main report. I don't know of a way to open them programmatically like you are doing here
http://diamond.businessobjects.com/robhorne</a> -
How to show all the search result in a report page
I have a report page which the user can enter first or last name to find the matched employees. The current report only show maximum of 15 matched results. How to show all of them in one page if more than 15.
Also, the employee name on the report is a link, how to make the link to be conditional. ( I mean it can be a link or not based on another column)
Thanks.
JenHi, you can change the number of rows on the report definition page (15 is the default value)- that's also where you can change pagination and max. number of rows etc.
About the second question - you will have to use Case or Decode in your report query and have the value as link or not based on the condition column, something like:
Select Decode(condition_column, 'link_value', '<a href="f?p=YOUR_APP:PAGE_TO_LINK_TO:' || :SESSION || ':::::">display_column</a>' , display_column) From .....
Hope this helps. -
How to show filtered parameter in dropdown form in crm 2013
Hi,
I want to create a report in crm 2013. When I report is run then filtered parameter fill record from database in dropdown form and when I select record from dropdown then generate report of selected record. Please tell me how to show record in filtered parameter
from database within crm. In below image paramter is text field. How to auto fill filtered parameter from database.Hi Aamir,
Check if the below link helps!!
https://social.microsoft.com/Forums/en-US/ad8a3bc2-dbec-4597-adfd-8bd6c34f5e9a/drop-down-parameter-in-crm-2011-custom-report?forum=crm
Thanks,
Prasad
Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question. -
How to show GL Account Balance amount in Ledger Report.
Hi,
We need to show General Ledger balance based transaction wise how we can show GL Account Balance where it will store which table and which filed.here below query is there here only I need to add balance after Total please guide me.
select T0.transid,T0.number,T2.seriesname,T0.refdate,T0.baseref,T1.account,T1.shortname,T3.acctname,T1.credit,T1.debit,T1.credit+T1.debit as Total,T3.CurrTotal,T0.ref1,T0.ref2,T1.ref3line,T0.memo,T1.paymentref, T1.ProfitCode, T1.OcrCode2, T1.OcrCode3,
T1.OcrCode4, T1.OcrCode5,T1.U_Naration as RowNarration,T0.U_naration as DocumentNarration from OJDT T0
inner join jdt1 T1 on T0.transid=T1.transid
inner join nnm1 T2 on T2.series=T0.series
inner join oact T3 on T3.acctcode=T1.account
where T3.acctcode='1030101003'
Regds,
Sampathhi sampath,
I giving u fair idea how to show g/l account balance
There is a field in JDT1 - journal entry rows - JDT1.DebCred which is indicator when g/l account
is debited / credited,it is filled with value D or C.
You can add Case syntax in existing query with condition JDT1.DebCred = 'D' then
JDT1.Debit + Opening/Closing balance and if JDT1.DebCred = 'C' then
JDT1.Credit - Opening/Closing balance.
It requires much time & effort to build this query.
Edited by: Jeyakanthan A on May 14, 2009 3:54 PM
Maybe you are looking for
-
Newbie: BW Export to Excel/CSV file destination and file name
Is it possible to control where the export of a BW web query is sent by appending the url with some tag voodoo? Also, can I create the file name of the exported file? I figured out how to kick off the export process, but haven't found any code to con
-
True circles from round-cap dash?
In the discussion of tricuspoids Jongware stated that "circles" in Illustrator are not circles at all, but approximations "from four quadratic Bézier curves." Is the round cap for a stroke generated the same way, or would it be possible to generate a
-
I have 2008 dual quad 2.6GHZ, 32 GB ram. 128GB SSD system drive, 3 1TB storage drives, mountain Lion. Mac pro boots up fine, no issues while operating it. however, in some sort of a time span between 12-18 hours, i will hear the fan spinning at very
-
Path expression for custom generic object
I am creating a user defined generic object so that I can use path expression to edit them from the form. Below is the code snippet. However the path expression is coming as null. Please let me know if I am missing anything <block> <set name='newGen'
-
ALE/UPS (Uniform packaging service): Can anybody help me?
Hi experts, for a new ALE scenario (MM master data distribution) I would like to use the ALE/Uniform Packaging Service technology. Unfortunately, the SAP documentation is not very helpful. Does someone have experience with Uniform Packaging Service?