T420 nvidia GPU driver crash
Hi all.
I have an annoing issue with my t420's gpu. Driver seems to crash very often when i use gpu-hungry apps. i get a message like this "nvidia kernel driver has stopped responding but was recovered'. Maybe anoyone has the same problem and solved it?
System is windows 8 64bit with the latest updates and video drivers.
Lock PCI/AGP to 66/33, that's the first thing.
2nd thing, get a better RAM.
3rd thing, get a better PSU.
Similar Messages
-
NVIDIA Diplay driver crashes in Premiere Pro CS5.5
I have been editing AVCHD video in the latest version of Premiere Pro CS5.5 for some time now and then suddenly about 3 weeks ago I started having problems where the NVIDIA display driver for my GTX 580 would crash and then recover but kick me out of Premiere Pro in the process. I had the Mercury Playback Hardware engine enabled. Chaging it to software render mode fixed the issue and ultimately rolling my video drivers back to a previous version seemed to eliminate the problem completely allowing me to enable hardware render mode again.
I turned off auto updates on my video card since then and last night the problem suddenly came back. This time software render mode crashes too. I can even have Premiere Pro open and not be doing anyhting and sometimes after a while it just randomly crashes. It happens with all my projects and never in the same place on the timeline.
I deleted all of the render files and recreated them and even imported the project into a new project. This did not fix it.
I tried reinstalling old and new drivers using the "clean install" feature. No good.
I edited the TDR settings in my registry increasing the delay time before it recovers as recommended by Microsoft when this issue occcurs and this did not resolve my issue.
I am really concerned now because from everyhting I have read it should be working in software render mode. Since it's not I am at a loss.
I have other programs that use CUDA hardware rendering and none of them have an issue. It just seems to be with Premiere.
I also checked the temperature of the video card and that's fine. No overheating issues with my MOBO either.
I read somewhere that it could even be caused by a drop in clock speed on the card so I downloaded a utility to overclock my card and that didn't resolve the issue either.
Any ideas? I'm in crunch time on a major project and I can't render, export or do anything without it crashing.
I have Windows 7 Ultimate 64 Bit, 12 GB of RAM, terabytes of hard drive space and an intel 6 core processor. My specs are well above the requirements. I have had this card since December and like I said, the issues just started a few weeks ago.
Thanks.I am not at home so I haven't tried rolling back further but I can confirm the version drivers that I tried are 320.18 which was working for a while, 320.49 and 327.23.
For reference I have Premiere Pro CS5.5.2 and the latest Windows 7 64-bit updates installed.
The mobo is an ASUS P6T Deluxe.
When I reinstall the NVIDIA drivers I use the clean install option which completely removes the previous version before reinstalling. I found that I have to reinstall this is the best way since uninstalling from the control panel only adds the drivers back on a reboot. -
My GPU driver crash my system plz help
hello,
when i try to put TURBO mode or DOT my system become very unstable. The diagnostic said that my problem come from my GPU driver ATI2DVAG.
My GPU is a suma ati 9500 pro and i use catalyst 3.7
bios version : 1.7 (but i have try with 1.5 and 1.3 !!!)
mobo 865pe neo2 fis2r
why my GPU crash my system like that????
is there a solution???Lock PCI/AGP to 66/33, that's the first thing.
2nd thing, get a better RAM.
3rd thing, get a better PSU. -
Satellite Pro A100-080: NVidia display driver crashing during 3D Games
Hello,
i have some problems with the display driver since i've bought the notebook 9 month ago. I've tried to install every new driver published on the toshiba homepage but no driver is running stable on my system.
The problem is that my notebook is crashing with bluescreen during playing 3d games and my windows vista tells me its the display driver causing the crashes.
I had the previous version of the driver installed several month ago and i feel it was more stable than the current version. But unfortunately i've lost the files for that one, but i would prefer any functional driver for this notebook.
My Notebook
Satellite Pro A100-080
Modelno. PSAASE-00G004GR
Manufactured on 2007-02-20
Thank you all in advance for yr assistance
bgrds
RobertHi,
below you will find a small list of games i've tried on my system.
Supreme Commander
Halflife 2 (including several mods)
World in Conflict Demo
Warhammer - Mark of Chaos
Warhammer - Dawn of War
X3
I've also tried to play the older games on compatibility mode, but this doesnt run. At least one of those games should run properly on my system, but none is running. -
W701ds Nvidia display driver crashes frequently
Hello, I have a W701ds with 16gb of ram running Win7 Pro 64bit. Using preinstalled OS. My display driver keeps crashing (about once an hour or so) with an error message that the display driver recovered from an error. The screen goes black for a few seconds and then returns. This generally happens when I am watching a video or working in Powerpoint, Adobe After Effects, etc. All drivers are up to date. Has anyone else experienced this problem, and do you have any recommendations as to how I can resolve this? Thanks all.
Been a couple months since the video card was replaced. Happy to say I am ROCK solid now!! Absolutely zero display crashes even running heavy applications!
-
[Partly solved] Nouveau driver crashes, nvidia-libgl-beta problem etc.
I had the same issue as in thread 1446984 but disabling USB 3.0 in BIOS did not solve the problem.
I have a new install, and are getting complete freezes on shutdown, but also on switching to another tty than the graphical (freeze after 1-20 seconds after switching tty). This is reproducible 100% of the time.
I were also getting errors about nouveau, and thought the tty switching freezes might be related to that.
This was correct, since installing the nvidia-beta driver solved that problem (but not the shutdown issues).
As a side note, I also had some minor problems installing nvidia-libgl-beta which is a dependency for nvidia-beta.
Trying to install it with aura gave the following error:
$ sudo aura -A nvidia-libgl-beta
[sudo] password for rix:
aura >>= The following are not AUR packages:
nvidia-libgl-beta
aura >>= No valid packages specified.
Installing it manually from the tarball in AUR seemed to work, but when I tried to install nvidia-beta it complained about nvidia-libgl-beta missing, and it's not in the output of pacman -Q !
Trying to reinstall it works as well, and pacman says it is reinstalling with net upgrade size 0.
I removed nvidia-libgl-beta as a dependency from the nvidia-beta PKGBUILD and installed it, it seems to work at least, no more tty switch crashes.
Also, after installing there is no nvidia*.pkg.tar.xz files in /var/cache/pacman/pkg/. Maybe these are put somewhere else?
dmesg (includes nouveau errors but it's the "ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion ..." line I believe is the interesting one):
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=1a4daa5b-c2e9-44c0-9155-95a9d2c25878 rw cryptdevice=UUID=67ed3f10-6bc9-4413-b567-f9f0111aecf0:cryptroot resume=/dev/mapper/lvm-swapvol quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba004fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba005000-0x00000000ba00bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ba00c000-0x00000000ba7abfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba7ac000-0x00000000baa1afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000baa1b000-0x00000000cb3c9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb3ca000-0x00000000cb453fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cb454000-0x00000000cb46efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cb46f000-0x00000000cb9ddfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cb9de000-0x00000000cbffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cbfff000-0x00000000cbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Micro-Star International Co., Ltd. GS60 2PE/MS-16H2, BIOS E16H2IMS.106 05/13/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x42fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 0420000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 5 base 00CE000000 mask 7FFE000000 uncachable
[ 0.000000] 6 base 00CD000000 mask 7FFF000000 uncachable
[ 0.000000] 7 base 042FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcc000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff8800000fd770]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
[ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
[ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x42fc00000-0x42fdfffff]
[ 0.000000] [mem 0x42fc00000-0x42fdfffff] page 2M
[ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x42c000000-0x42fbfffff]
[ 0.000000] [mem 0x42c000000-0x42fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x42bffffff]
[ 0.000000] [mem 0x400000000-0x42bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xba004fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xb9ffffff] page 2M
[ 0.000000] [mem 0xba000000-0xba004fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xba00c000-0xba7abfff]
[ 0.000000] [mem 0xba00c000-0xba1fffff] page 4k
[ 0.000000] [mem 0xba200000-0xba5fffff] page 2M
[ 0.000000] [mem 0xba600000-0xba7abfff] page 4k
[ 0.000000] BRK [0x01b27000, 0x01b27fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbaa1b000-0xcb3c9fff]
[ 0.000000] [mem 0xbaa1b000-0xbabfffff] page 4k
[ 0.000000] [mem 0xbac00000-0xcb1fffff] page 2M
[ 0.000000] [mem 0xcb200000-0xcb3c9fff] page 4k
[ 0.000000] BRK [0x01b28000, 0x01b28fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xcbfff000-0xcbffffff]
[ 0.000000] [mem 0xcbfff000-0xcbffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x374fa000-0x37a74fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 MSI_NB)
[ 0.000000] ACPI: XSDT 0x00000000CB459098 0000B4 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CB466618 00010C (v05 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CB4591E0 00D433 (v02 MSI_NB MEGABOOK 00000030 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000CB9DC080 000040
[ 0.000000] ACPI: APIC 0x00000000CB466728 000092 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CB4667C0 000044 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x00000000CB466808 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: MSDM 0x00000000CB4668B0 000055 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: LPIT 0x00000000CB466908 00005C (v01 MSI_NB MEGABOOK 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CB466968 000228 (v01 INTEL sensrhub 00000000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CB466B90 00018F (v01 Intel zpodd 00001000 INTL 20120711)
[ 0.000000] ACPI: SLIC 0x00000000CB466D20 000176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CB466E98 000575 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CB467410 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x00000000CB467EE8 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CB467F28 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CB467F60 000315 (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000CB468278 003550 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000CB46B7C8 00143A (v01 SgRef SgPeg 00001000 INTL 20120711)
[ 0.000000] ACPI: DMAR 0x00000000CB46CC08 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000CB46CCC0 001472 (v01 OptRef OptTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x42fdfffff]
[ 0.000000] NODE_DATA [mem 0x42fdf6000-0x42fdfafff]
[ 0.000000] [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041f400000-ffff88042f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x42fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xba004fff]
[ 0.000000] node 0: [mem 0xba00c000-0xba7abfff]
[ 0.000000] node 0: [mem 0xbaa1b000-0xcb3c9fff]
[ 0.000000] node 0: [mem 0xcbfff000-0xcbffffff]
[ 0.000000] node 0: [mem 0x100000000-0x42fdfffff]
[ 0.000000] On node 0 totalpages: 4173553
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12934 pages used for memmap
[ 0.000000] DMA32 zone: 827733 pages, LIFO batch:31
[ 0.000000] Normal zone: 52216 pages used for memmap
[ 0.000000] Normal zone: 3341824 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcd200000-0xcf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba005000-0xba00bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba7ac000-0xbaa1afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb3ca000-0xcb453fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb454000-0xcb46efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb46f000-0xcb9ddfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb9de000-0xcbffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc000000-0xccffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd000000-0xcf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88042fa00000 s86784 r8192 d23808 u262144
[ 0.000000] pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4108318
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=1a4daa5b-c2e9-44c0-9155-95a9d2c25878 rw cryptdevice=UUID=67ed3f10-6bc9-4413-b567-f9f0111aecf0:cryptroot resume=/dev/mapper/lvm-swapvol quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16347668K/16694212K available (5334K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 346544K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.320 MHz processor
[ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.50 BogoMIPS (lpj=8314400)
[ 0.000024] pid_max: default: 32768 minimum: 301
[ 0.000029] ACPI: Core revision 20140424
[ 0.009832] ACPI: All ACPI Tables successfully acquired
[ 0.010517] Security Framework initialized
[ 0.010521] Yama: becoming mindful.
[ 0.011207] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.013363] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.014280] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.014292] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.014481] Initializing cgroup subsys memory
[ 0.014494] Initializing cgroup subsys devices
[ 0.014498] Initializing cgroup subsys freezer
[ 0.014500] Initializing cgroup subsys net_cls
[ 0.014502] Initializing cgroup subsys blkio
[ 0.014521] CPU: Physical Processor ID: 0
[ 0.014521] CPU: Processor Core ID: 0
[ 0.014525] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.015291] mce: CPU supports 9 MCE banks
[ 0.015301] CPU0: Thermal monitoring enabled (TM1)
[ 0.015311] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
[ 0.015382] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
[ 0.015942] ftrace: allocating 20434 entries in 80 pages
[ 0.022339] dmar: Host address width 39
[ 0.022341] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.022348] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.022349] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.022352] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.022353] dmar: RMRR base: 0x000000cbe94000 end: 0x000000cbea2fff
[ 0.022354] dmar: RMRR base: 0x000000cd000000 end: 0x000000cf1fffff
[ 0.022418] IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
[ 0.022419] HPET id 0 under DRHD base 0xfed91000
[ 0.022420] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.022530] Enabled IRQ remapping in x2apic mode
[ 0.022531] Enabling x2apic
[ 0.022532] Enabled x2apic
[ 0.022541] Switched APIC routing to cluster x2apic.
[ 0.022958] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056020] smpboot: CPU0: Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz (fam: 06, model: 3c, stepping: 03)
[ 0.056031] TSC deadline timer enabled
[ 0.056047] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.056060] ... version: 3
[ 0.056061] ... bit width: 48
[ 0.056061] ... generic registers: 4
[ 0.056062] ... value mask: 0000ffffffffffff
[ 0.056063] ... max period: 0000ffffffffffff
[ 0.056063] ... fixed-purpose events: 3
[ 0.056064] ... event mask: 000000070000000f
[ 0.079493] x86: Booting SMP configuration:
[ 0.079494] .... node #0, CPUs: #1
[ 0.093398] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.100083] #2 #3 #4 #5 #6 #7
[ 0.220438] x86: Booted up 1 node, 8 CPUs
[ 0.220442] smpboot: Total of 8 processors activated (39925.00 BogoMIPS)
[ 0.226421] devtmpfs: initialized
[ 0.228397] PM: Registering ACPI NVS region [mem 0xba005000-0xba00bfff] (28672 bytes)
[ 0.228398] PM: Registering ACPI NVS region [mem 0xcb46f000-0xcb9ddfff] (5697536 bytes)
[ 0.228983] pinctrl core: initialized pinctrl subsystem
[ 0.229021] RTC time: 0:23:19, date: 08/15/14
[ 0.229056] NET: Registered protocol family 16
[ 0.229128] cpuidle: using governor ladder
[ 0.229129] cpuidle: using governor menu
[ 0.229147] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.229148] ACPI: bus type PCI registered
[ 0.229150] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.229202] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.229203] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.229261] PCI: Using configuration type 1 for base access
[ 0.243279] ACPI: Added _OSI(Module Device)
[ 0.243281] ACPI: Added _OSI(Processor Device)
[ 0.243282] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.243283] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.245353] ACPI Error: No handler for Region [EC__] (ffff88041f03bc18) [EmbeddedControl] (20140424/evregion-162)
[ 0.245356] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-299)
[ 0.245358] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC__._REG] (Node ffff88041f03ecf8), AE_NOT_EXIST (20140424/psparse-536)
[ 0.246040] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.286406] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.299829] ACPI: Dynamic OEM Table Load:
[ 0.299835] ACPI: SSDT 0xFFFF880418CB3000 0003EA (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.313292] ACPI: Dynamic OEM Table Load:
[ 0.313298] ACPI: SSDT 0xFFFF880418D31000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.326537] ACPI: Dynamic OEM Table Load:
[ 0.326541] ACPI: SSDT 0xFFFF880418D01A00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.354461] ACPI: Interpreter enabled
[ 0.354467] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.354471] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.354482] ACPI: (supports S0 S3 S4 S5)
[ 0.354483] ACPI: Using IOAPIC for interrupt routing
[ 0.354500] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.371125] ACPI: Power Resource [PG00] (on)
[ 0.385654] ACPI: Power Resource [FN00] (off)
[ 0.385699] ACPI: Power Resource [FN01] (off)
[ 0.385742] ACPI: Power Resource [FN02] (off)
[ 0.385786] ACPI: Power Resource [FN03] (off)
[ 0.385831] ACPI: Power Resource [FN04] (off)
[ 0.386362] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.386366] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.386519] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.386601] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.386931] PCI host bridge to bus 0000:00
[ 0.386933] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.386935] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.386936] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.386937] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.386938] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.386939] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.386940] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.386940] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.386941] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.386942] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.386943] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff]
[ 0.386948] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.387008] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.387033] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.387061] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.387093] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.387101] pci 0000:00:02.0: reg 0x10: [mem 0xf6400000-0xf67fffff 64bit]
[ 0.387105] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.387108] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.387156] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.387162] pci 0000:00:03.0: reg 0x10: [mem 0xf7414000-0xf7417fff 64bit]
[ 0.387235] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.387251] pci 0000:00:14.0: reg 0x10: [mem 0xf7400000-0xf740ffff 64bit]
[ 0.387303] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.387325] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.387356] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.387373] pci 0000:00:16.0: reg 0x10: [mem 0xf741e000-0xf741e00f 64bit]
[ 0.387429] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.387490] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.387508] pci 0000:00:1a.0: reg 0x10: [mem 0xf741c000-0xf741c3ff]
[ 0.387586] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.387623] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.387656] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.387670] pci 0000:00:1b.0: reg 0x10: [mem 0xf7410000-0xf7413fff 64bit]
[ 0.387730] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.387754] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.387784] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.387850] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.387876] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.387902] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.387968] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.387994] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.388018] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.388084] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.388110] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.388133] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[ 0.388199] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.388225] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.388261] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.388279] pci 0000:00:1d.0: reg 0x10: [mem 0xf741b000-0xf741b3ff]
[ 0.388358] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.388395] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.388428] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
[ 0.388564] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.388578] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.388584] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.388591] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.388597] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.388618] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.388625] pci 0000:00:1f.2: reg 0x24: [mem 0xf741a000-0xf741a7ff]
[ 0.388658] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.388708] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.388721] pci 0000:00:1f.3: reg 0x10: [mem 0xf7419000-0xf74190ff 64bit]
[ 0.388739] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.388833] pci 0000:01:00.0: [10de:1199] type 00 class 0x030200
[ 0.388840] pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff]
[ 0.388847] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.388854] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.388858] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.388863] pci 0000:01:00.0: reg 0x30: [mem 0xf6000000-0xf607ffff pref]
[ 0.388900] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.393257] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.393259] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.393261] pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf60fffff]
[ 0.393264] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.393341] acpiphp: Slot [1] registered
[ 0.393351] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.393425] acpiphp: Slot [1-1] registered
[ 0.393435] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.393439] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.393443] pci 0000:00:1c.2: bridge window [mem 0xf6800000-0xf71fffff]
[ 0.393448] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
[ 0.393716] pci 0000:04:00.0: [1969:e091] type 00 class 0x020000
[ 0.394035] pci 0000:04:00.0: reg 0x10: [mem 0xf7300000-0xf733ffff 64bit]
[ 0.394138] pci 0000:04:00.0: reg 0x18: [io 0xc000-0xc07f]
[ 0.395629] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.395860] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.400012] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.400015] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 0.400019] pci 0000:00:1c.3: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.400137] pci 0000:05:00.0: [8086:08b1] type 00 class 0x028000
[ 0.400192] pci 0000:05:00.0: reg 0x10: [mem 0xf7200000-0xf7201fff 64bit]
[ 0.400431] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.400485] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.406642] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.406647] pci 0000:00:1c.4: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.406725] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.414012] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.414043] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.414073] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.414102] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.414131] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.414160] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.414189] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.414217] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.414398] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.414425] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.414488] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.414490] vgaarb: loaded
[ 0.414491] vgaarb: bridge control possible 0000:00:02.0
[ 0.414510] PCI: Using ACPI for IRQ routing
[ 0.415717] PCI: pci_cache_line_size set to 64 bytes
[ 0.415760] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.415762] e820: reserve RAM buffer [mem 0xba005000-0xbbffffff]
[ 0.415763] e820: reserve RAM buffer [mem 0xba7ac000-0xbbffffff]
[ 0.415764] e820: reserve RAM buffer [mem 0xcb3ca000-0xcbffffff]
[ 0.415765] e820: reserve RAM buffer [mem 0x42fe00000-0x42fffffff]
[ 0.415845] NetLabel: Initializing
[ 0.415846] NetLabel: domain hash size = 128
[ 0.415847] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.415856] NetLabel: unlabeled traffic allowed by default
[ 0.415875] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.415879] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.417907] Switched to clocksource hpet
[ 0.421100] pnp: PnP ACPI init
[ 0.421109] ACPI: bus type PNP registered
[ 0.421154] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.421156] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.421271] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.421272] system 00:01: [io 0xffff] has been reserved
[ 0.421274] system 00:01: [io 0xffff] has been reserved
[ 0.421275] system 00:01: [io 0xffff] has been reserved
[ 0.421276] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.421278] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.421279] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.421280] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.421281] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.421283] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.421284] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.421306] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.421336] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.421337] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.421368] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.421370] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.421401] pnp 00:05: Plug and Play ACPI device, IDs ETD0301 PNP0f13 SYN1500 SYN0002 (active)
[ 0.421425] pnp 00:06: Plug and Play ACPI device, IDs MSI0007 PNP030b (active)
[ 0.428497] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.428499] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.428500] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.428501] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.428502] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.428503] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.428504] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.428505] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.428507] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.428508] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.428509] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.428510] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.428512] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.428661] pnp: PnP ACPI: found 8 devices
[ 0.428662] ACPI: bus type PNP unregistered
[ 0.434525] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.434527] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.434529] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.434547] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.434548] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.434549] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.434553] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf200000-0xcf3fffff]
[ 0.434557] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref]
[ 0.434559] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.434560] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.434562] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.434564] pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf60fffff]
[ 0.434566] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.434568] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.434571] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.434574] pci 0000:00:1c.0: bridge window [mem 0xcf200000-0xcf3fffff]
[ 0.434578] pci 0000:00:1c.0: bridge window [mem 0xcf400000-0xcf5fffff 64bit pref]
[ 0.434583] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.434585] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.434594] pci 0000:00:1c.2: bridge window [mem 0xf6800000-0xf71fffff]
[ 0.434597] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
[ 0.434602] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.434604] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 0.434608] pci 0000:00:1c.3: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.434614] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.434619] pci 0000:00:1c.4: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.434625] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.434627] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.434628] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.434628] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.434629] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.434630] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.434631] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.434632] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.434633] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.434634] pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff]
[ 0.434635] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.434636] pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf60fffff]
[ 0.434637] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.434638] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.434639] pci_bus 0000:02: resource 1 [mem 0xcf200000-0xcf3fffff]
[ 0.434640] pci_bus 0000:02: resource 2 [mem 0xcf400000-0xcf5fffff 64bit pref]
[ 0.434641] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.434642] pci_bus 0000:03: resource 1 [mem 0xf6800000-0xf71fffff]
[ 0.434643] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf2afffff 64bit pref]
[ 0.434644] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.434645] pci_bus 0000:04: resource 1 [mem 0xf7300000-0xf73fffff]
[ 0.434646] pci_bus 0000:05: resource 1 [mem 0xf7200000-0xf72fffff]
[ 0.434665] NET: Registered protocol family 2
[ 0.434817] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.434957] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.435058] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.435070] TCP: reno registered
[ 0.435083] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.435119] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.435175] NET: Registered protocol family 1
[ 0.435185] pci 0000:00:02.0: Boot video device
[ 0.468054] pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.468062] PCI: CLS 64 bytes, default 64
[ 0.468102] Unpacking initramfs...
[ 0.532072] Freeing initrd memory: 5612K (ffff8800374fa000 - ffff880037a75000)
[ 0.532091] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.532093] software IO TLB [mem 0xc73ca000-0xcb3ca000] (64MB) mapped at [ffff8800c73ca000-ffff8800cb3c9fff]
[ 0.532304] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.532341] Scanning for low memory corruption every 60 seconds
[ 0.532551] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.532785] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.533736] zbud: loaded
[ 0.533873] VFS: Disk quotas dquot_6.5.2
[ 0.533900] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.533989] msgmni has been set to 31940
[ 0.534033] Key type big_key registered
[ 0.534168] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.534218] io scheduler noop registered
[ 0.534220] io scheduler deadline registered
[ 0.534251] io scheduler cfq registered (default)
[ 0.534366] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[ 0.534677] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.534686] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.534714] vesafb: mode is 2880x1620x32, linelength=11520, pages=0
[ 0.534715] vesafb: scrolling: redraw
[ 0.534716] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.534738] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90005c00000, using 18240k, total 18240k
[ 0.822629] Console: switching to colour frame buffer device 360x101
[ 1.110079] fb0: VESA VGA frame buffer device
[ 1.110094] intel_idle: MWAIT substates: 0x42120
[ 1.110095] intel_idle: v0.4 model 0x3C
[ 1.110096] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.110313] GHES: HEST is not enabled!
[ 1.110361] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.110652] Linux agpgart interface v0.103
[ 1.110693] rtc_cmos 00:02: RTC can wake from S4
[ 1.110794] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.110819] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.110828] Intel P-state driver initializing.
[ 1.110838] Intel pstate controlling: cpu 0
[ 1.110854] Intel pstate controlling: cpu 1
[ 1.110867] Intel pstate controlling: cpu 2
[ 1.110879] Intel pstate controlling: cpu 3
[ 1.110891] Intel pstate controlling: cpu 4
[ 1.110899] Intel pstate controlling: cpu 5
[ 1.110911] Intel pstate controlling: cpu 6
[ 1.110923] Intel pstate controlling: cpu 7
[ 1.111000] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.111276] TCP: cubic registered
[ 1.111504] NET: Registered protocol family 10
[ 1.111971] NET: Registered protocol family 17
[ 1.112783] registered taskstats version 1
[ 1.114136] Magic number: 10:956:354
[ 1.114303] rtc_cmos 00:02: setting system clock to 2014-08-15 00:23:19 UTC (1408062199)
[ 1.114490] PM: Checking hibernation image partition /dev/mapper/lvm-swapvol
[ 1.114497] PM: Hibernation image not present or could not be loaded.
[ 1.116376] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
[ 1.116380] Write protecting the kernel read-only data: 8192k
[ 1.121213] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
[ 1.123178] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
[ 1.135874] random: systemd-tmpfile urandom read with 4 bits of entropy available
[ 1.136933] systemd-udevd[80]: starting version 215
[ 1.139538] device-mapper: uevent: version 1.0.3
[ 1.139594] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
[ 1.149753] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.156378] ACPI: bus type USB registered
[ 1.156404] usbcore: registered new interface driver usbfs
[ 1.156415] usbcore: registered new interface driver hub
[ 1.156476] usbcore: registered new device driver usb
[ 1.156933] SCSI subsystem initialized
[ 1.162079] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.162996] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.163041] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.163214] ehci-pci: EHCI PCI platform driver
[ 1.163316] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.163320] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.163332] ehci-pci 0000:00:1a.0: debug port 2
[ 1.164275] libata version 3.00 loaded.
[ 1.164967] AVX2 version of gcm_enc/dec engaged.
[ 1.167248] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.167266] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf741c000
[ 1.175425] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.175578] hub 1-0:1.0: USB hub found
[ 1.175582] hub 1-0:1.0: 2 ports detected
[ 1.175779] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.175783] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.175793] ehci-pci 0000:00:1d.0: debug port 2
[ 1.179710] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.179723] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf741b000
[ 1.179857] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.188804] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.188987] hub 2-0:1.0: USB hub found
[ 1.188991] hub 2-0:1.0: 2 ports detected
[ 1.189214] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.189222] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.189323] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.189343] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[ 1.189561] hub 3-0:1.0: USB hub found
[ 1.189580] hub 3-0:1.0: 14 ports detected
[ 1.192223] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.192226] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.192336] hub 4-0:1.0: USB hub found
[ 1.192347] hub 4-0:1.0: 6 ports detected
[ 1.193001] usb: failed to peer usb4-port6 and usb3-port4 by location (usb4-port6:none) (usb3-port4:usb4-port4)
[ 1.193002] usb usb4-port6: failed to peer to usb3-port4 (-16)
[ 1.193002] usb: port power management may be unreliable
[ 1.193071] ahci 0000:00:1f.2: version 3.0
[ 1.193201] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.193239] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x10 impl SATA mode
[ 1.193241] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.193733] scsi0 : ahci
[ 1.193850] scsi1 : ahci
[ 1.193946] scsi2 : ahci
[ 1.194041] scsi3 : ahci
[ 1.194109] scsi4 : ahci
[ 1.194177] scsi5 : ahci
[ 1.194201] ata1: DUMMY
[ 1.194201] ata2: DUMMY
[ 1.194202] ata3: DUMMY
[ 1.194203] ata4: DUMMY
[ 1.194205] ata5: SATA max UDMA/133 abar m2048@0xf741a000 port 0xf741a300 irq 44
[ 1.194206] ata6: DUMMY
[ 1.482494] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.512521] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.513764] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.513768] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.513770] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.514950] ata5.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133
[ 1.514953] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.516323] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.516327] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.516329] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.517496] ata5.00: configured for UDMA/133
[ 1.517668] scsi 4:0:0:0: Direct-Access ATA HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5
[ 1.520380] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.520382] sd 4:0:0:0: [sda] 4096-byte physical blocks
[ 1.520463] sd 4:0:0:0: [sda] Write Protect is off
[ 1.520466] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.520499] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.535828] tsc: Refined TSC clocksource calibration: 2494.224 MHz
[ 1.594508] sda: sda1 sda2 sda3 sda128
[ 1.595313] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.606608] hub 1-1:1.0: USB hub found
[ 1.606671] hub 1-1:1.0: 6 ports detected
[ 1.712720] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.836976] hub 2-1:1.0: USB hub found
[ 1.837108] hub 2-1:1.0: 8 ports detected
[ 1.996416] usb 3-5: new low-speed USB device number 2 using xhci_hcd
[ 2.173583] usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.175034] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.176842] usbcore: registered new interface driver usbhid
[ 2.176844] usbhid: USB HID core driver
[ 2.177298] input: Mouse USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:FFC0:0040.0001/input/input2
[ 2.177340] hid-generic 0003:FFC0:0040.0001: input,hidraw0: USB HID v1.11 Mouse [Mouse USB Laser Mouse] on usb-0000:00:14.0-5/input0
[ 2.239993] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 2.403591] usb 2-1.8: new full-speed USB device number 3 using ehci-pci
[ 2.491845] hid-generic 0003:1770:FF00.0002: hiddev0,hidraw1: USB HID v1.10 Device [MSI EPF USB MSI EPF USB] on usb-0000:00:1d.0-1.8/input0
[ 2.537099] Switched to clocksource tsc
[ 9.125249] random: nonblocking pool is initialized
[ 15.501907] NET: Registered protocol family 38
[ 17.087530] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 18.229927] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
[ 18.534354] systemd-udevd[279]: starting version 215
[ 18.952256] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/PNP0C09:00/PNP0C0D:00/input/input3
[ 18.952469] ACPI: Fan [FAN0] (off)
[ 18.952491] ACPI: Fan [FAN1] (off)
[ 18.952509] ACPI: Fan [FAN2] (off)
[ 18.952526] ACPI: Fan [FAN3] (off)
[ 18.952543] ACPI: Fan [FAN4] (off)
[ 18.955614] ACPI: Lid Switch [LID0]
[ 18.955655] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 18.955658] ACPI: Power Button [PWRB]
[ 18.955686] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 18.955687] ACPI: Power Button [PWRF]
[ 18.966606] wmi: Mapper loaded
[ 19.047576] thermal LNXTHERM:00: registered as thermal_zone0
[ 19.047578] ACPI: Thermal Zone [TZ00] (28 C)
[ 19.047729] thermal LNXTHERM:01: registered as thermal_zone1
[ 19.047730] ACPI: Thermal Zone [TZ01] (30 C)
[ 19.050742] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.068816] thermal LNXTHERM:02: registered as thermal_zone2
[ 19.068818] ACPI: Thermal Zone [THRM] (53 C)
[ 19.071927] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 19.071931] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.124018] [drm] Initialized drm 1.1.0 20060810
[ 19.155967] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 19.191918] ACPI: Battery Slot [BAT1] (battery present)
[ 19.198641] ACPI: AC Adapter [ADP1] (on-line)
[ 19.201166] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[ 19.230883] microcode: CPU0 sig=0x306c3, pf=0x20, revision=0x17
[ 19.320790] mousedev: PS/2 mouse device common for all mice
[ 19.340987] input: MSI WMI hotkeys as /devices/virtual/input/input8
[ 19.350216] iTCO_vendor_support: vendor-support=0
[ 19.357069] [drm] Memory usable by graphics device = 2048M
[ 19.357071] [drm] Replacing VGA console driver
[ 19.357073] checking generic (d0000000 11d0000) vs hw (d0000000 10000000)
[ 19.357074] fb: switching to inteldrmfb from VESA VGA
[ 19.357086] Console: switching to colour dummy device 80x25
[ 19.360084] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 19.360106] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 19.360171] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 19.375453] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 19.375461] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 19.375462] [drm] Driver supports precise vblank timestamp query.
[ 19.375480] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 19.396788] [drm] VBT doesn't support DRRS
[ 19.413293] alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [44:8a:5b:6f:c3:57]
[ 19.434956] cfg80211: Calling CRDA to update world regulatory domain
[ 19.465506] microcode: CPU1 sig=0x306c3, pf=0x20, revision=0x17
[ 19.465534] microcode: CPU2 sig=0x306c3, pf=0x20, revision=0x17
[ 19.465555] microcode: CPU3 sig=0x306c3, pf=0x20, revision=0x17
[ 19.465575] microcode: CPU4 sig=0x306c3, pf=0x20, revision=0x17
[ 19.465588] microcode: CPU5 sig=0x306c3, pf=0x20, revision=0x17
[ 19.465603] microcode: CPU6 sig=0x306c3, pf=0x20, revision=0x17
[ 19.465625] microcode: CPU7 sig=0x306c3, pf=0x20, revision=0x17
[ 19.465673] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 19.518669] Bluetooth: Core ver 2.19
[ 19.518681] NET: Registered protocol family 31
[ 19.518682] Bluetooth: HCI device and connection manager initialized
[ 19.518688] Bluetooth: HCI socket layer initialized
[ 19.518689] Bluetooth: L2CAP socket layer initialized
[ 19.545919] Bluetooth: SCO socket layer initialized
[ 19.545920] systemd-udevd[296]: renamed network interface eth0 to enp4s0
[ 19.555627] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 19.579086] fbcon: inteldrmfb (fb0) is primary device
[ 19.634446] usbcore: registered new interface driver btusb
[ 19.647874] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 19.662947] MXM: GUID detected in BIOS
[ 19.663037] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 19.663093] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 19.663229] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 19.663230] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 19.672404] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 19.672404] Copyright(c) 2003- 2014 Intel Corporation
[ 19.672511] iwlwifi 0000:05:00.0: irq 47 for MSI/MSI-X
[ 19.774284] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 19.803544] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f00)
[ 19.804987] iwlwifi 0000:05:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
[ 19.820975] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0e.
[ 19.908919] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[ 19.956219] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 20.011971] iwlwifi 0000:05:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[ 20.012015] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
[ 20.012231] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
[ 20.155135] Adding 16777212k swap on /dev/mapper/lvm-swapvol. Priority:-1 extents:1 across:16777212k FS
[ 20.301346] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 20.329844] systemd-udevd[285]: renamed network interface wlan0 to wlp5s0
[ 20.646833] Console: switching to colour frame buffer device 360x101
[ 20.661807] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 20.661808] i915 0000:00:02.0: registered panic notifier
[ 20.684762] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 20.707714] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 20.707767] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:44/LNXVIDEO:00/input/input9
[ 20.708831] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 20.708889] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10
[ 20.708952] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 20.709072] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e4190a2
[ 20.709074] nouveau [ DEVICE][0000:01:00.0] Chipset: GK104 (NVE4)
[ 20.709075] nouveau [ DEVICE][0000:01:00.0] Family : NVE0
[ 20.709094] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 20.709100] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 20.709101] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
[ 20.709410] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
[ 20.709527] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 20.778578] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 20.778580] nouveau [ VBIOS][0000:01:00.0] using image from PROM
[ 20.778686] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 20.778688] nouveau [ VBIOS][0000:01:00.0] version 80.04.ef.00.21
[ 20.778987] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
[ 20.778994] nouveau [ VBIOS][0000:01:00.0] running init tables
[ 20.968712] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 20.968772] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 20.968830] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 21.009002] sound hdaudioC1D0: autoconfig: line_outs=2 (0x15/0x1b/0x0/0x0/0x0) type:speaker
[ 21.009005] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 21.009006] sound hdaudioC1D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 21.009007] sound hdaudioC1D0: mono: mono_out=0x0
[ 21.009008] sound hdaudioC1D0: dig-out=0x1e/0x0
[ 21.009009] sound hdaudioC1D0: inputs:
[ 21.009010] sound hdaudioC1D0: Mic=0x18
[ 21.009011] sound hdaudioC1D0: Internal Mic=0x12
[ 21.016614] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input14
[ 21.016783] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 21.016842] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 21.043492] nouveau 0000:01:00.0: irq 50 for MSI/MSI-X
[ 21.043506] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 21.043546] nouveau [ PFB][0000:01:00.0] RAM type: GDDR5
[ 21.043547] nouveau [ PFB][0000:01:00.0] RAM size: 3072 MiB
[ 21.043548] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 21.045953] nouveau [ VOLT][0000:01:00.0] GPU voltage: 600000uv
[ 21.074609] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 21.074615] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 21.074622] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 21.074643] nouveau [ CLK][0000:01:00.0] 07: core 324-405 MHz memory 648 MHz
[ 21.074686] nouveau [ CLK][0000:01:00.0] 0a: core 405-967 MHz memory 1620 MHz
[ 21.074757] nouveau [ CLK][0000:01:00.0] 0e: core 405-967 MHz memory 4000 MHz
[ 21.074843] nouveau [ CLK][0000:01:00.0] 0f: core 405-967 MHz memory 5000 MHz
[ 21.074913] nouveau [ CLK][0000:01:00.0] --: core 324 MHz memory 648 MHz
[ 21.113338] nouveau E[ PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x400700 [ IBUS ]
[ 21.113368] vga_switcheroo: enabled
[ 21.113471] [TTM] Zone kernel: Available graphics memory: 8177794 kiB
[ 21.113473] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 21.113473] [TTM] Initializing pool allocator
[ 21.113477] [TTM] Initializing DMA pool allocator
[ 21.113484] nouveau [ DRM] VRAM: 3072 MiB
[ 21.113485] nouveau [ DRM] GART: 1048576 MiB
[ 21.113487] nouveau [ DRM] TMDS table version 2.0
[ 21.113489] nouveau [ DRM] DCB version 4.0
[ 21.119681] nouveau [ DRM] MM: using COPY for buffer copies
[ 21.119686] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 1
[ 21.347781] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 21.985072] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 21.993709] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 26.353187] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 26.353470] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 26.353475] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 28.489788] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: data=ordered
[ 28.566055] systemd-journald[255]: Received request to flush runtime journal from PID 1
[ 28.853911] systemd-journald[255]: File /var/log/journal/2083dda0e63b4e6cad96cc755ad72173/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 30.756848] alx 0000:04:00.0: irq 51 for MSI/MSI-X
[ 30.757162] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 30.759420] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
[ 30.759647] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
[ 30.771168] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[ 30.780781] nouveau E[ PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x400700 [ IBUS ]
[ 33.277389] nouveau E[ PGRAPH][0000:01:00.0] HUB_INIT timed out
[ 33.277393] nouveau E[ PGRAPH][0000:01:00.0] 409000 - done 0x00000220
[ 33.277397] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 33.277401] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000006 0x00000001
[ 33.277403] nouveau E[ PGRAPH][0000:01:00.0] 502000 - done 0x00000340
[ 33.277408] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x80000000 0x00006500 0x00000000 0x00000000
[ 33.277414] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000002 0x00000000
[ 33.277415] nouveau E[ PGRAPH][0000:01:00.0] 50a000 - done 0x00000340
[ 33.277421] nouveau E[ PGRAPH][0000:01:00.0] 50a000 - stat 0x80000000 0x00008e00 0x00000000 0x00000000
[ 33.277426] nouveau E[ PGRAPH][0000:01:00.0] 50a000 - stat 0x00000000 0x00000000 0x00000002 0x00000000
[ 33.277428] nouveau E[ PGRAPH][0000:01:00.0] 512000 - done 0x00000300
[ 33.277433] nouveau E[ PGRAPH][0000:01:00.0] 512000 - stat 0x00000000 0x00017f00 0x00000000 0x00000000
[ 33.277439] nouveau E[ PGRAPH][0000:01:00.0] 512000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 33.277441] nouveau E[ PGRAPH][0000:01:00.0] 51a000 - done 0x00000300
[ 33.277446] nouveau E[ PGRAPH][0000:01:00.0] 51a000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 33.277451] nouveau E[ PGRAPH][0000:01:00.0] 51a000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
[ 33.277452] nouveau E[ PGRAPH][0000:01:00.0] init failed, -16
[ 34.226370] cfg80211: Calling CRDA to update world regulatory domain
[ 36.247358] fuse init (API version 7.23)
[ 39.340754] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 39.341033] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 39.341037] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 53.952829] systemd-journald[255]: File /var/log/journal/2083dda0e63b4e6cad96cc755ad72173/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 54.363832] nouveau E[ DRM] failed to idle channel 0xcccc0000 [DRM]
[ 54.477547] pci_pm_runtime_suspend(): nouveau_pmops_runtime_suspend+0x0/0xe0 [nouveau] returns -16
[ 60.362546] wlp5s0: authenticate with 94:44:52:dc:db:bf
[ 60.365767] wlp5s0: send auth to 94:44:52:dc:db:bf (try 1/3)
[ 60.367581] wlp5s0: authenticated
[ 60.370498] wlp5s0: associate with 94:44:52:dc:db:bf (try 1/3)
[ 60.374426] wlp5s0: RX AssocResp from 94:44:52:dc:db:bf (capab=0x411 status=0 aid=3)
[ 60.375328] wlp5s0: associated
[ 60.375354] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
journalctl -x:
-- Logs begin at Thu 2014-08-14 21:31:47 CEST, end at Fri 2014-08-15 02:25:40 CEST. --
Aug 14 21:31:47 riXmsi systemd[579]: Starting Paths.
-- Subject: Unit UNIT has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has begun starting up.
Aug 14 21:31:47 riXmsi systemd[579]: Reached target Paths.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has finished starting up.
-- The start-up result is done.
Aug 14 21:31:47 riXmsi systemd[579]: Starting Timers.
-- Subject: Unit UNIT has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has begun starting up.
Aug 14 21:31:47 riXmsi systemd[579]: Reached target Timers.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has finished starting up.
-- The start-up result is done.
Aug 14 21:31:47 riXmsi systemd[579]: Starting Sockets.
-- Subject: Unit UNIT has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has begun starting up.
Aug 14 21:31:47 riXmsi systemd[579]: Reached target Sockets.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has finished starting up.
-- The start-up result is done.
Aug 14 21:31:47 riXmsi systemd[579]: Starting Basic System.
-- Subject: Unit UNIT has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has begun starting up.
Aug 14 21:31:47 riXmsi systemd[579]: Reached target Basic System.
-- Subject: Unit UNITkeyboard and mouse are now auto-detected. Do you have xf86-input-evdev installed? If so, you do not need to explicitly set the drivers for keyboard and mouse in xorg.conf. You can try it out if you like.
-
Lenovo IdeaPad Y500, Linux 3.10, NVidia driver crashes
After today's update of the Linux kernel to 3.10, I can not start X using the proprietary nvidia driver on my IdeaPad Y500 laptop (MBG2BMH with GeForce GT650M GPU).
When I try to do this, it takes a second or two in the "loading GLX" state, after which the screen goes black. My fan goes to max and after a few seconds, the system dies.
X logs don't show much:
[ 49.888] (**) NVIDIA(0): Enabling 2D acceleration
[ 56.164] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 56.164] (EE) NVIDIA(0): check your system's kernel log for additional error
[ 56.164] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
[ 56.164] (EE) NVIDIA(0): README for additional information.
[ 56.164] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[ 56.164] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 56.164] (II) UnloadModule: "nvidia"
[ 56.164] (II) UnloadSubModule: "shadow"
[ 56.164] (II) UnloadSubModule: "wfb"
[ 56.164] (II) UnloadSubModule: "fb"
[ 56.164] (EE) Screen(s) found, but none have a usable configuration.
I will add a kernel log after rebooting, because I seem to have lost it.
I think the relevant message read "GPU fell off the bus", which I think indicates a crash of the GPU driver.
After rolling back to 3.9.9, the issue is gone.
My xorg.conf (and xorg.conf.d) does not contain anything special (only a DPI fix). I tried removing it, but the issue is still there.
EDIT: I seem to be unable to get a kernel log for these sessions.
Journalctl simply does not show the failing session.
I don't know why I did get a log before. It happened on a linux-ck build with a couple of modifications, a while back (and the logs seem to be gone).
I'll try again later, making sure I sync.
Last edited by TBoshoven (2013-07-25 13:57:22)The problem persist for me with:
local/linux 3.10.5-1 (base)
The Linux kernel and modules
local/bumblebee 3.2.1-3
NVIDIA Optimus support for Linux through VirtualGL
local/nvidia 325.15-1
NVIDIA drivers for linux
local/nvidia-utils 325.15-1
NVIDIA drivers utilities
Xorg.8.log
[ 414.008]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 414.008] X Protocol Version 11, Revision 0
[ 414.008] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 414.008] Current Operating System: Linux drog-laptop 3.10.5-1-ARCH #1 SMP PREEMPT Mon Aug 5 08:04:22 CEST 2013 x86_64
[ 414.008] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=2d778b92-8e56-41d2-a238-cb1ea674849b ro quiet
[ 414.008] Build Date: 01 July 2013 10:48:42AM
[ 414.008]
[ 414.008] Current version of pixman: 0.30.0
[ 414.008] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 414.008] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 414.008] (==) Log file: "/var/log/Xorg.8.log", Time: Tue Aug 6 14:58:48 2013
[ 414.022] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 414.022] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 414.033] (==) ServerLayout "Layout0"
[ 414.033] (==) No screen section available. Using defaults.
[ 414.033] (**) |-->Screen "Default Screen Section" (0)
[ 414.033] (**) | |-->Monitor "<default monitor>"
[ 414.033] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 414.033] (**) | |-->Device "DiscreteNvidia"
[ 414.033] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 414.033] (**) Option "AutoAddDevices" "false"
[ 414.033] (**) Option "AutoAddGPU" "false"
[ 414.033] (**) Not automatically adding devices
[ 414.033] (==) Automatically enabling devices
[ 414.033] (**) Not automatically adding GPU devices
[ 414.034] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 414.034] Entry deleted from font path.
[ 414.034] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 414.034] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 414.034] Entry deleted from font path.
[ 414.034] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 414.034] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 414.034] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 414.034] (==) |-->Input Device "<default pointer>"
[ 414.034] (==) |-->Input Device "<default keyboard>"
[ 414.034] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 414.034] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 414.034] (II) Loader magic: 0x7fdc20
[ 414.034] (II) Module ABI versions:
[ 414.034] X.Org ANSI C Emulation: 0.4
[ 414.034] X.Org Video Driver: 14.1
[ 414.034] X.Org XInput driver : 19.1
[ 414.034] X.Org Server Extension : 7.0
[ 414.034] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 414.034] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 414.034] setversion 1.4 failed
[ 414.035] (--) PCI:*(0:1:0:0) 10de:0fd1:144d:c650 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 414.036] Initializing built-in extension Generic Event Extension
[ 414.036] Initializing built-in extension SHAPE
[ 414.036] Initializing built-in extension MIT-SHM
[ 414.036] Initializing built-in extension XInputExtension
[ 414.036] Initializing built-in extension XTEST
[ 414.036] Initializing built-in extension BIG-REQUESTS
[ 414.036] Initializing built-in extension SYNC
[ 414.036] Initializing built-in extension XKEYBOARD
[ 414.036] Initializing built-in extension XC-MISC
[ 414.036] Initializing built-in extension SECURITY
[ 414.036] Initializing built-in extension XINERAMA
[ 414.036] Initializing built-in extension XFIXES
[ 414.036] Initializing built-in extension RENDER
[ 414.036] Initializing built-in extension RANDR
[ 414.036] Initializing built-in extension COMPOSITE
[ 414.036] Initializing built-in extension DAMAGE
[ 414.036] Initializing built-in extension MIT-SCREEN-SAVER
[ 414.036] Initializing built-in extension DOUBLE-BUFFER
[ 414.036] Initializing built-in extension RECORD
[ 414.036] Initializing built-in extension DPMS
[ 414.036] Initializing built-in extension X-Resource
[ 414.036] Initializing built-in extension XVideo
[ 414.036] Initializing built-in extension XVideo-MotionCompensation
[ 414.036] Initializing built-in extension XFree86-VidModeExtension
[ 414.036] Initializing built-in extension XFree86-DGA
[ 414.036] Initializing built-in extension XFree86-DRI
[ 414.036] Initializing built-in extension DRI2
[ 414.036] (II) LoadModule: "glx"
[ 414.064] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 415.388] (II) Module glx: vendor="NVIDIA Corporation"
[ 415.388] compiled for 4.0.2, module version = 1.0.0
[ 415.388] Module class: X.Org Server Extension
[ 415.388] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
[ 415.424] Loading extension GLX
[ 415.424] (II) LoadModule: "nvidia"
[ 415.424] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 415.575] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 415.575] compiled for 4.0.2, module version = 1.0.0
[ 415.575] Module class: X.Org Video Driver
[ 415.586] (II) LoadModule: "mouse"
[ 415.586] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 415.598] (II) Module mouse: vendor="X.Org Foundation"
[ 415.598] compiled for 1.14.0, module version = 1.9.0
[ 415.598] Module class: X.Org XInput Driver
[ 415.598] ABI class: X.Org XInput driver, version 19.1
[ 415.598] (II) LoadModule: "kbd"
[ 415.599] (WW) Warning, couldn't open module kbd
[ 415.599] (II) UnloadModule: "kbd"
[ 415.599] (II) Unloading kbd
[ 415.599] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 415.599] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
[ 415.599] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 415.599] (--) using VT number 7
[ 415.614] (II) Loading sub module "fb"
[ 415.614] (II) LoadModule: "fb"
[ 415.614] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 415.631] (II) Module fb: vendor="X.Org Foundation"
[ 415.631] compiled for 1.14.2, module version = 1.0.0
[ 415.631] ABI class: X.Org ANSI C Emulation, version 0.4
[ 415.631] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 415.631] (II) Loading sub module "wfb"
[ 415.631] (II) LoadModule: "wfb"
[ 415.631] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 415.647] (II) Module wfb: vendor="X.Org Foundation"
[ 415.647] compiled for 1.14.2, module version = 1.0.0
[ 415.647] ABI class: X.Org ANSI C Emulation, version 0.4
[ 415.647] (II) Loading sub module "shadow"
[ 415.647] (II) LoadModule: "shadow"
[ 415.647] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 415.648] (II) Module shadow: vendor="X.Org Foundation"
[ 415.648] compiled for 1.14.2, module version = 1.1.0
[ 415.648] ABI class: X.Org ANSI C Emulation, version 0.4
[ 415.648] (II) Loading sub module "ramdac"
[ 415.648] (II) LoadModule: "ramdac"
[ 415.648] (II) Module "ramdac" already built-in
[ 415.668] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 415.668] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 415.668] (==) NVIDIA(0): RGB weight 888
[ 415.668] (==) NVIDIA(0): Default visual is TrueColor
[ 415.668] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 415.669] (**) NVIDIA(0): Option "NoLogo" "true"
[ 415.669] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 415.669] (**) NVIDIA(0): Option "UseEDID" "false"
[ 415.669] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 415.669] (**) NVIDIA(0): Enabling 2D acceleration
[ 415.669] (**) NVIDIA(0): Ignoring EDIDs
[ 415.669] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 415.669] (**) NVIDIA(0): mode
[ 421.681] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 421.681] (EE) NVIDIA(0): check your system's kernel log for additional error
[ 421.681] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
[ 421.681] (EE) NVIDIA(0): README for additional information.
[ 421.681] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[ 421.681] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 421.681] (II) UnloadModule: "nvidia"
[ 421.681] (II) UnloadSubModule: "shadow"
[ 421.681] (II) UnloadSubModule: "wfb"
[ 421.681] (II) UnloadSubModule: "fb"
[ 421.681] (EE) Screen(s) found, but none have a usable configuration.
[ 421.681] (EE)
Fatal server error:
[ 421.681] (EE) no screens found(EE)
[ 421.681] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 421.681] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 421.681] (EE)
[ 421.681] (EE) Server terminated with error (1). Closing log file.
dmesg
[ 26.065828] bbswitch: version 0.7
[ 26.065841] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 26.065850] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 26.066059] bbswitch: detected an Optimus _DSM function
[ 26.066076] pci 0000:01:00.0: enabling device (0006 -> 0007)
[ 26.066122] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 26.068197] bbswitch: disabling discrete graphics
[ 26.119240] pci 0000:01:00.0: power state changed by ACPI to D3cold
[ 26.258241] systemd-logind[1007]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
[ 26.325508] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 33.492411] r8169 0000:03:00.0 enp3s0: link down
[ 33.492451] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 37.846847] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 38.221072] r8169 0000:03:00.0 enp3s0: link down
[ 38.221110] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 45.372589] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 48.517700] wlp2s0: authenticate with 00:25:c4:5a:3b:e1
[ 48.537543] wlp2s0: send auth to 00:25:c4:5a:3b:e1 (try 1/3)
[ 48.539639] wlp2s0: authenticated
[ 48.539671] ath9k 0000:02:00.0 wlp2s0: disabling HT/VHT due to WEP/TKIP use
[ 48.540740] wlp2s0: associate with 00:25:c4:5a:3b:e1 (try 1/3)
[ 48.544916] wlp2s0: RX AssocResp from 00:25:c4:5a:3b:e1 (capab=0x431 status=0 aid=2)
[ 48.545097] wlp2s0: associated
[ 48.545113] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 51.051628] EXT4-fs (sda7): re-mounted. Opts: data=ordered,commit=0
[ 51.539082] EXT4-fs (sda8): re-mounted. Opts: data=ordered,commit=0
[ 95.719761] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ 396.531583] usb 1-4: USB disconnect, device number 2
[ 397.445922] usb 1-4: new low-speed USB device number 3 using xhci_hcd
[ 397.463231] usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 397.465641] input: USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input14
[ 397.466186] hid-generic 0003:15D9:0A33.0002: input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:14.0-4/input0
[ 408.307902] bbswitch: enabling discrete graphics
[ 408.447228] pci 0000:01:00.0: power state changed by ACPI to D0
[ 414.455675] nvidia: module license 'NVIDIA' taints kernel.
[ 414.455679] Disabling lock debugging due to kernel taint
[ 414.460793] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 414.461133] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
[ 414.461140] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 325.15 Wed Jul 31 18:50:56 PDT 2013
[ 416.186061] nvidia 0000:01:00.0: irq 47 for MSI/MSI-X
[ 422.155242] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
[ 422.175315] NVRM: RmInitAdapter failed! (0x25:0x28:1157)
[ 422.175324] NVRM: rm_init_adapter(0) failed
[ 457.892854] bbswitch: enabling discrete graphics
[ 467.532288] bbswitch: enabling discrete graphics
[ 467.532300] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 467.542607] nvidia 0000:01:00.0: Refused to change power state, currently in D3
[ 562.917909] bbswitch: enabling discrete graphics
[ 562.917923] nvidia 0000:01:00.0: power state changed by ACPI to D0 -
Nvidia CUDA driver update fixes crashes for Premiere Pro and other applications
We are seeing reports that the CUDA 5.5.47 driver update released today addresses the crashing problems introduced by the CUDA 5.5.43 driver update in Premiere Pro and other applications. So, if you have an Nvidia GPU, please update your drivers to use the most recent version of the CUDA driver.
Thanks!It should be added that only Macs and Quadros need the CUDA driver. That is not required for use with GeForce cards on Windows.
-
Nvidia CUDA driver update fixes crashes for After Effects and other applications
We are seeing reports that the CUDA 5.5.47 driver update released today addresses the crashing problems introduced by the CUDA 5.5.43 driver update.
So, if you have an Nvidia GPU, please update your drivers to use the most recent version of the CUDA driver.
On Mac OS, you can update your version of the CUDA driver from the CUDA panel, available from the Mac OS System Preferences. For CUDA downloads, see the Nvidia website.
Also, make sure that you have installed the most recent updates for your Adobe video applications.I actually had a very negative thing happen to me when I updated CUDA to 5.5.47, it broke my computer! Here's what happened and how you might put a band-aid on it for the time being....
Specs:
MacPro (Mid 2010)
Mavericks 10.9.2
ATI Radieon HD 5770 1024 MB
1) I went to System Preferences > CUDA > Update and ran the updated for 5.5.47
2) After the update was successful, I launched Adobe Prelude CC and it crashed immediately. Then I launched Adobe Premiere CC, crashed on startup.
3) I restarted my computer
4) Tried launching Adobe Prelude CC again, crashed.
5) Restarted my computer in Single User Mode, Ran a File System Check, shows that the Mac HD Appeared to Be "Okay"
6) Rebooted and went to System Preferences > CUDA, it shows that I had 5.5.47 but that a UPDATE WAS REQUIRED, the problem was that it didn't have an update button
7) I went to the CUDA update website and found the 5.5.47 update for Mac, ran it and it appeared to install successfully, but the applications still crashed and the preference pane for CUDA still showed that an update was required.
8) I called Apple, they suggested re-installing Mavericks, so I did. Still the apps crashed and CUDA showed 5.5.47 with an update still being required
9) I searched for CUDA and found that it was in HD > Library > Frameworks
10) I moved the CUDA Framework file to my Desktop to make a copy and to remove it from the Frameworks folder
11) Launched Adobe Prelude CC and Adobe Premiere CC and they worked fine.
I know CUDA does some wonderful things when it works, so if anyone has any suggestions on how to re-install and it get it working again, please let me know. -
Skype video crashes my GPU driver and causes blue screen.
Hello,
Installed a new copy of windows and got the latest version of skype for my PC (on wich skype worked just fine, video calls, voice calls, but it was an older version. No hardware changes)
With the new skype, I , for the least, get driver crashes, and for the most, a blue screen, when I just go to options to set up my webcam.As soon as I see the square "loading" my webcam in the options, everything freezes and I get a driver crash or a blue screen.
Current specs:
i5 4440, stock clocks
2x8gb 1333 ddr3 1.5v ram, stock
R7 260x, stock
500w PSU, not the best quality, But I also tried a 1000w platinum PSU, and same resaults.
last error code I remeber from the blue screen was: 0x00000116
I know it is related to the GPU, but it doesn't have power deficiency, since I manage to run heavy games just fine.By the way, my webcam works just fine on different web sites, so it's not the webcam.
What I tried:
-Degrading to the oldest supported version by skype
-Degrading video drivers
-Using different webcams
-Installed all windows 7 64 bit updates
edit:
skype 6.14 works, but newer versions crash my GPU drivers and cause blue screenI would suggest uninstalling Droidcam as it could be the source of some delays assisting in causing the problem. TDR problems occur when your videocard is unable to respond in 2 seconds for a variety of reasons (heat, tweaks), forcefully resetting the card. Some people increase this delay in their registry from 2 to up to 10 seconds to give the card time to catch up so that a reset doesn't occur. You can try this MS fix it which increases this delay. https://support.microsoft.com/en-us/kb/2665946
-
P100-240: Toshiba GPU driver is old, Nvidia driver doesn't enable the fan?
Hi,
I was wondering if Toshiba could explain their choice here.
My laptop recently got sent in for repair because it burnt itself out due to me using Nvidias own drivers on my p100-240 (pspa3e).
The problem here is that:
a) Toshibas drivers for this card are well over a year old and sometimes buggy in new games
b) Toshiba does not seem to have followed the Nvidia spec (that or there is a major ACPI issue in their bios...)
so, Upon using the Nvidia drivers the laptops fan does not kick in, sending the systems temporature up to 106cand finally turning it off. It turned back on but basic graphics acceleration then failed to work.
SO, can we get an updated driver build? OR some kind of fan control app? or can you update your bios to enable nvidias drivers to function?
I feel like I cannot use my laptop for its purpose at the moment- I have reverted to installing a non-ACPI pc driver to force the fans to stay on which works well but then basic system functions like turn off do not work.
I have also been advised that this design flaw could be considered to make the system "not fit for purpose" under which case I could just return the laptop under the Sale of Goods act.
Though really, i'd just like to get my system working properly. It's bad enough not being able to run Linux on it, but even worse that windows doesnt work properly with it with official drivers.
One final question: Can I get the older BIOSes? several fixes work with them but not with the 4.0 bios (mainly linux fixes but as long as one OS works I don't care!)
Any tips on this are also welcome! Thanks for your help. :-)
Message was edited by: damiensturdyHi
>was wondering if Toshiba could explain their choice here.
If you want to hear anything from Toshiba then you have to contact them. This forum is only a user to user forum and unfortunately you will not find anyone from Toshiba here.
But maybe you want to hear my opinion;
>My laptop recently got sent in for repair because it burnt itself out due to me using Nvidias own drivers on my p100-240 (pspa3e).
>a) Toshibas drivers for this card are well over a year old and sometimes buggy in new games
Well, many Toshiba notebooks are delivered and equipped with the same graphic cards. Maybe you have to look in other notebook series which are delivered with the same card for a newer GPU driver.
But, you are right and generally the Toshiba graphic drivers are a little bit older as the original one from GPU manufacturer.
Why? First of all the nVidia or ATI original drivers are not designed for the notebook usage. These are drivers for desktop PC graphic cards. I visited the area for mobile drivers and found a info that I have to look on the notebook manufacturer site!!! This said everything!!!!
>b) Toshiba does not seem to have followed the Nvidia spec (that or there is a major ACPI issue in their bios...)
As mentioned above the original GPU drivers are not designed for the notebook usage.
Why? Because the notebook GPUs cannot be cooled like the graphic cards for the desktop PC!!!
The Toshiba own drivers support an overheating protection which helps to avoid an GPU damage!!!!
The original nVidia or ATI drivers do not support such overheating protection!!!
If you want to use such drivers, you can do this ONLY at your own risk!
>Can I get the older BIOSes?
It seems Toshiba page provides only the newest BIOS. Maybe the authorized service provider can help you and could send you an older BIOS version.
Two years ago I contacted the ASP in my country and got a early version of my BIOS for the A50 -
Firefox randomly crashes NVIDIA 230M driver
I am truly exasperated with these crashes, which now happen twice or three times per session (I am using a Vaio laptop with the latest NVIDIA driver for my 230M chipset).
This is how I have proceeded, so far with no effect.
1) I altered the Nvidia Power Management setting to 'Prefer Maximum Performance', as advised on other threads. No change. 2) I deleted my entire profile (including settings) and reinstalled FF14. No change. 3) I deleted FF14 and re-installed FF13. No change. 4) My next step will be to repeat step 2 for FF13.
This is even worse than the video problems with Flash a month or two ago. I am seriously considering junking Firefox after many years of happy travelling. The thought of going over to Chrome fills me with horror, but it may be the only solution.
[Reposted here at the suggestion of john99 in response to my comment at http://support.mozilla.org/en-US/questions/931921Certainly that helped when I was running FF13 and had Flash problems a month ago. I would imagine it might help here too. Everything seems incredibly laggy right now. I will take up your suggestion and if there are any further driver crashes I will send in the report.
-
Latest Firefox 4 beta 6.
nVidia GT240 1GB DDR3 with driver version 258.96.
Windows 7 Ultimate.
If I have plenty of tabs opened, in Firefox 4 beta 6 with hardware acceleration enabled, using the Windows 7 Taskbar preview feature (that will show all the tabs Firefox has loaded) will cause the Nvidia display driver to crash. When this happen, the GUI part of Firefox will be unusable and has to be killed via Task Manager.
This doesn't happen if hardware acceleration is disabled.It is beta software and the older 4.0 b6 version may not work with all display drivers.
You can trey the test extension: http://jagriffin.wordpress.com/2010/08/30/introducting-grafx-bot/ -
Qosmio X70-A - difference between nVidia and Toshiba GPU driver
Is there any difference between the nvidia display driver and the one packed by toshiba?
I've been using the one from toshiba but Geforce Experience is giving me a headache with warnings about a newer driver and toshiba doesn't seem to supply one.Yes of course there is a difference between the nVidia GPU drivers (or any drivers provided by graphic card manufacturers) and drivers provided by Toshiba.
The GPU drivers from Toshiba driver page are modified and made for mobile usage.
Every notebook model supports different components (CPU, cooling modules, etc) and different design. Therefore the heat dissipation is always different.
The GPU driver provided by Toshiba supports some kind of GPU overheating protection and protects the graphic chip from damage. This means that GPU performance is controlled by the driver and in case the internal temperature would increase to critical level, the GPU performance would be decreased. Also the notebook shuts down automatically if temperature would be too high. -
Premiere pro cc and nvidia driver crash... why?
Hi guys
Since my new PC configuration, I've been having difficulties making my graphics card (Gygabyte Geforce GTX 650 Ti) enable the mercury playback engine cuda on premiere pro cc. it works for a few moments or it renders 2 3 minutes of my video and vith video hardware acceleration, but after that the video driver crashes and the rendering process and premiere as well. i have the latest driver from nvidia, but also have tried with drivers as old as 310.70 (released december 2012). i use wi 7 sp1, my cpu is intel's [email protected] and intel z77 chipset with 16GB of ram if this is of any relevance. Any ideas on what's the cause of the problem or how i may fix it? (the same thing also happened with premiere pro cs6)
Thanks for your help !From Tweakers Page - Balanced Systems
What about the amount of VRAM?
As a rough guide, how much VRAM should be installed on the video card, think along these lines:
For SD material, 1 GB is enough
For HD material, go for 1 - 2 GB
For 3K or 4K, go for 2 - 4 GB
For 5K+, go for 4 - 6 GB
Keep in mind that the requirements can vary significantly, depending on the complexity of the timeline. If it happens that the VRAM is depleted (not enough memory), hardware MPE is automatically turned off rather ungracefully and stays off for the rest of the encoding. If you use two video cards in CC, each card uses its own memory and cannot use the memory on the second card. The encoding process works like this: Frame 1 rendered on card 1, frame 2 rendered on card 2, frame 3 rendered on card 1, etc. If either card runs out of memory, again hardware MPE is turned off. Simply put, two video cards with 1 GB each can not be treated as a single card with 2 GB, so the risk of turning off hardware MPE automatically is bigger with these two cards than with a single card.
Maybe you are looking for
-
Can't see PC's on network, but can ping them, connect to server etc
Hi All I'm experiencing something pretty bizarre. I have a small network at my office. There are 3 PC's, and 2 Macs, one of them a Mac Mini running 10.6.5. All computers are set to the same workgroup. All the PCs can see all the Macs, no problem. Yet
-
Dg4odbc on windows server 64 bit
windows server 64 bit Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Gateway : Heterogeneous Agent Release 11.2.0.1.0 - 64bit Production Built with Oracle Database Gateway for ODBC Oracle Home :D:\Oracle\Ora10G Gateway Home : C:\pr
-
WCF-SQL Adapter Login fail 'NT AUTHORITY\ANONYMOUS LOGON
Hi, I am have three WCF-SQL receive with WCF-SQL Adapater and two are working fine but the third one is giving the following warning in the Eventlog. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. I really appreciate your help. thanks Ram -
-
Request log file - Custom application version
Application version : UNKNOWN in Request log file Hi, In the request log files for the programs registered with our custom applications, the application version is printed as UNKNOWN(first line of log file, next to custom application name). Initially
-
In Muse preview my fonts look great and are set as regular, which they should be. When publishing the site some pages revert to Bold type and should not be. This seems to be appearing in Firefox 13.0.1 only and not Sarafi or Chrome. If I clear the ca