T61 nvidia gpu
Anyone got a more permanent fix for the t61 nvidia gpu overheating, getting really fed up of putting a blowtorch to it, done it like 10 times now. Any help would be very appreciated
There is no really cheap way out of this problem. You'll probably find plenty of people selling boards pulled from scrap laptops or failed boards that have been reflowed or baked (like yours), but the only way to fix it properly is with a board from an august 2008 model, or one with Intel graphics. If you're interested in one you can send me the model, serial, date code and cpu model number if you know it (in a private message) and I'll see what's available.
In my opinion if you like the laptop, it's worth fixing and you might as well fix it right. Overheating your chip, or even infrared reflowing of the chip won't fix it, it only causes temporary contact across the fractured circuits. I'd never recommend this for anything other than diagnostic purposes.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)
Similar Messages
-
Successful T61P Nvidia GPU motherboard swap to T61 Intel GPU
Hi all,
Just finished my first successful T61 Intel GPU motherboard conversion from a failed T61P with the dreaded "fatal" Nvidia GPU disease. At a very reasonable price, forum contributor Tuus furnished me with a good used T61 Merom/Intel board with a Middleton bios, which allows for faster Penryn CPU's (up to T9500) and SATA2 speeds on a Merom/Intel motherboard. I used the on-line Lenovo training videos and the Lenovo system maintenance manuals as a guide, and all went quite well. Thanks to all previous forum posters for providing me with an incredible knowledgebase of Thinkpad laptop system problems and solutions, and in particular TuuS for sharing his upgrade recommendations and repair experience.
T61P- 15.4 WSXGA, Intel 965 GPU, 4GB mem, T9300 CPU, 100gbx7200 rpm HDHappy to hear that the planar swap went well.
Enjoy your reborn T61!
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
My r61's NVIDIA GPU failed. It looks like there is a precedence of NVIDIA GPU failure in R61 and T61.
When I power on the R61, the screen is blank.
What are my options?
Thanks.You might bake the system board - long-lasting success doubtful
You might replace the system board by a working one with NVIDIA GPU - riskfully if the GPU is produced before August 2008
You might contact a repair provider who solders a new GPU to your mainboard - good option if you need the GPU power, but there are conterfeit NVIDIA chips, so choose the repair provider carefully.
You might replace the system board by a working one with Intel GPU - the best option
Depending on the form factor of your R61, you can also use a system board of a R400/R500, but modifications will be needed.
You might buy a newer ThinkPad. Good option because you'll get DDR3 RAM and probably a display with LED backlight.
In an unlikely case, your problem isn't caused by the NVIDIA GPU -
Unable to Use Onboard Audio with Nvidia GPU since Linux 3.4
I am currently stuck using linux 3.3.8-1 along with nvidia 295.49-1, because I don't know how to workaround the kernel disabling MSI for snd-hda-intel. This module is used by both the Nvidia HDMI audio and the ALC880 onboard audio. Previously, I have been able to disable HDMI audio to be able to use the onboard audio, but now I don't know what to do. I have attempted to use "options snd-hda-intel enable_msi=1" when modprobing on boot, which gets rid of the "hda_intel: Disabling MSI" message but it hasn't given me a working onboard audio output.
I have also used the following command along with enable_msi=1 (found here: http://www.mjmwired.net/kernel/Document … HOWTO.txt) in my rc.local
echo 1 > /sys/bus/pci/devices/0000\:00\:1b.0/msi_bus
Of course, it is my assumption that the kernel disabling MSI is the cause of the problem, but it might be something else. Please let me know if any additional logs would be helpful.
Linux 3.4.4-3, Nvidia 302.17-2 Dmesg Output
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.4-3-ARCH (nobody@rampage) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Tue Jul 3 15:35:13 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe54000 (usable)
[ 0.000000] BIOS-e820: 000000003fe54000 - 000000003fee8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fee8000 - 000000003ff00000 (ACPI data)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: 507GR /D915GAG, BIOS AG91510J.15A.0816.2005.0214.1818 02/14/2005
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3fe54 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00fe650] fe650
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
[ 0.000000] RAMDISK: 3fb6f000 - 3fe44000
[ 0.000000] Allocated new RAMDISK: 37529000 - 377fd6a7
[ 0.000000] Move RAMDISK from 000000003fb6f000 - 000000003fe436a6 to 37529000 - 377fd6a6
[ 0.000000] ACPI: RSDP 000fe020 00014 (v00 GATEWA)
[ 0.000000] ACPI: RSDT 3fefde48 00038 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
[ 0.000000] ACPI: FACP 3fefcf10 00074 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
[ 0.000000] ACPI: DSDT 3fef8010 0339C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
[ 0.000000] ACPI: FACS 3fee5c40 00040
[ 0.000000] ACPI: APIC 3fefce10 00068 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
[ 0.000000] ACPI: WDDT 3fef7f90 00040 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
[ 0.000000] ACPI: MCFG 3fef7f10 0003C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
[ 0.000000] ACPI: SSDT 3fef6d90 00124 (v01 GATEWA CpuPm 00000330 MSFT 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 134MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003fe54
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fe54
[ 0.000000] On node 0 totalpages: 261603
[ 0.000000] free_area_init_node: node 0, pgdat c061ec40, node_mem_map f6d28200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 269 pages used for memmap
[ 0.000000] HighMem zone: 34121 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:c0100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6d07000 s31424 r0 d21824 u53248
[ 0.000000] pcpu-alloc: s31424 r0 d21824 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259558
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/10f8033d-8fe9-46be-bccf-68a14025bbaa ro init=/bin/systemd
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2093600 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003fe54)
[ 0.000000] Memory: 1025576k/1046864k available (3810k kernel code, 20836k reserved, 1471k data, 524k init, 137560k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0629000 - 0xc06ac000 ( 524 kB)
[ 0.000000] .data : 0xc04b88f7 - 0xc0628800 (1471 kB)
[ 0.000000] .text : 0xc0100000 - 0xc04b88f7 (3810 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2999.992 MHz processor.
[ 0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.98 BogoMIPS (lpj=9999973)
[ 0.006674] pid_max: default: 32768 minimum: 301
[ 0.006706] Security Framework initialized
[ 0.006712] AppArmor: AppArmor disabled by boot time parameter
[ 0.006735] Mount-cache hash table entries: 512
[ 0.007027] Initializing cgroup subsys cpuacct
[ 0.007032] Initializing cgroup subsys memory
[ 0.007043] Initializing cgroup subsys devices
[ 0.007046] Initializing cgroup subsys freezer
[ 0.007049] Initializing cgroup subsys net_cls
[ 0.007052] Initializing cgroup subsys blkio
[ 0.007102] CPU: Physical Processor ID: 0
[ 0.007105] CPU: Processor Core ID: 0
[ 0.007108] mce: CPU supports 4 MCE banks
[ 0.007122] CPU0: Thermal monitoring enabled (TM1)
[ 0.007127] using mwait in idle threads.
[ 0.010796] ACPI: Core revision 20120320
[ 0.013347] ftrace: allocating 16930 entries in 34 pages
[ 0.023410] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.023795] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.058322] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
[ 0.059996] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.059996] ... version: 0
[ 0.059996] ... bit width: 40
[ 0.059996] ... generic registers: 18
[ 0.059996] ... value mask: 000000ffffffffff
[ 0.059996] ... max period: 0000007fffffffff
[ 0.059996] ... fixed-purpose events: 0
[ 0.059996] ... event mask: 000000000003ffff
[ 0.076747] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.096685] CPU 1 irqstacks, hard=f64ae000 soft=f64b0000
[ 0.096689] Booting Node 0, Processors #1 Ok.
[ 0.009999] Initializing CPU#1
[ 0.109847] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.109913] Brought up 2 CPUs
[ 0.109918] Total of 2 processors activated (12004.96 BogoMIPS).
[ 0.110087] devtmpfs: initialized
[ 0.110253] PM: Registering ACPI NVS region [mem 0x3fe54000-0x3fee7fff] (606208 bytes)
[ 0.111622] NET: Registered protocol family 16
[ 0.111622] ACPI: bus type pci registered
[ 0.111622] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.111622] PCI: not using MMCONFIG
[ 0.112603] PCI: Using configuration type 1 for base access
[ 0.116699] bio: create slab <bio-0> at 0
[ 0.116741] ACPI: Added _OSI(Module Device)
[ 0.116741] ACPI: Added _OSI(Processor Device)
[ 0.116741] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.116741] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.117482] ACPI: EC: Look up EC in DSDT
[ 0.119433] ACPI: Interpreter enabled
[ 0.119446] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.119477] ACPI: Using IOAPIC for interrupt routing
[ 0.119501] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.119654] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.119657] PCI: Using MMCONFIG for extended config space
[ 0.121061] ACPI: No dock devices found.
[ 0.121073] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.122518] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.125297] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.125302] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.125306] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.125310] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000fffff] (ignored)
[ 0.125314] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff] (ignored)
[ 0.125317] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xe0000000] (ignored)
[ 0.125321] PCI: root bus 00: using default resources
[ 0.125377] PCI host bridge to bus 0000:00
[ 0.125382] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.125385] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.125400] pci 0000:00:00.0: [8086:2580] type 00 class 0x060000
[ 0.125463] pci 0000:00:01.0: [8086:2581] type 01 class 0x060400
[ 0.125521] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.125577] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
[ 0.125597] pci 0000:00:1b.0: reg 10: [mem 0x53300000-0x53303fff 64bit]
[ 0.125676] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.125704] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
[ 0.125786] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.125815] pci 0000:00:1c.1: [8086:2662] type 01 class 0x060400
[ 0.125898] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.125928] pci 0000:00:1c.2: [8086:2664] type 01 class 0x060400
[ 0.126011] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.126040] pci 0000:00:1c.3: [8086:2666] type 01 class 0x060400
[ 0.126123] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.126154] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[ 0.126201] pci 0000:00:1d.0: reg 20: [io 0x4080-0x409f]
[ 0.126239] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[ 0.126285] pci 0000:00:1d.1: reg 20: [io 0x4060-0x407f]
[ 0.126322] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[ 0.126368] pci 0000:00:1d.2: reg 20: [io 0x4040-0x405f]
[ 0.126405] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[ 0.126451] pci 0000:00:1d.3: reg 20: [io 0x4020-0x403f]
[ 0.126498] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[ 0.126521] pci 0000:00:1d.7: reg 10: [mem 0x53304000-0x533043ff]
[ 0.126613] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.126638] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.126718] pci 0000:00:1f.0: [8086:2640] type 00 class 0x060100
[ 0.126810] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.126823] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0680-06ff
[ 0.126850] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
[ 0.126867] pci 0000:00:1f.1: reg 10: [io 0x40d8-0x40df]
[ 0.126878] pci 0000:00:1f.1: reg 14: [io 0x40ec-0x40ef]
[ 0.126889] pci 0000:00:1f.1: reg 18: [io 0x40d0-0x40d7]
[ 0.126901] pci 0000:00:1f.1: reg 1c: [io 0x40e8-0x40eb]
[ 0.126912] pci 0000:00:1f.1: reg 20: [io 0x40b0-0x40bf]
[ 0.126954] pci 0000:00:1f.2: [8086:2651] type 00 class 0x01018f
[ 0.126971] pci 0000:00:1f.2: reg 10: [io 0x40c8-0x40cf]
[ 0.126981] pci 0000:00:1f.2: reg 14: [io 0x40e4-0x40e7]
[ 0.126991] pci 0000:00:1f.2: reg 18: [io 0x40c0-0x40c7]
[ 0.127002] pci 0000:00:1f.2: reg 1c: [io 0x40e0-0x40e3]
[ 0.127012] pci 0000:00:1f.2: reg 20: [io 0x40a0-0x40af]
[ 0.127053] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.127072] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
[ 0.127129] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
[ 0.127217] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
[ 0.127232] pci 0000:01:00.0: reg 10: [mem 0x52000000-0x52ffffff]
[ 0.127247] pci 0000:01:00.0: reg 14: [mem 0x40000000-0x4fffffff 64bit pref]
[ 0.127261] pci 0000:01:00.0: reg 1c: [mem 0x50000000-0x51ffffff 64bit pref]
[ 0.127271] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f]
[ 0.127281] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[ 0.127352] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[ 0.127367] pci 0000:01:00.1: reg 10: [mem 0x53000000-0x53003fff]
[ 0.136679] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.136685] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.136689] pci 0000:00:01.0: bridge window [mem 0x52000000-0x530fffff]
[ 0.136695] pci 0000:00:01.0: bridge window [mem 0x40000000-0x51ffffff pref]
[ 0.136765] pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
[ 0.136788] pci 0000:02:00.0: reg 10: [io 0x2028-0x202f]
[ 0.136804] pci 0000:02:00.0: reg 14: [io 0x2034-0x2037]
[ 0.136819] pci 0000:02:00.0: reg 18: [io 0x2020-0x2027]
[ 0.136836] pci 0000:02:00.0: reg 1c: [io 0x2030-0x2033]
[ 0.136852] pci 0000:02:00.0: reg 20: [io 0x2000-0x201f]
[ 0.136868] pci 0000:02:00.0: reg 24: [mem 0x53200000-0x532001ff]
[ 0.136885] pci 0000:02:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[ 0.146676] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.146682] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.146687] pci 0000:00:1c.0: bridge window [mem 0x53200000-0x532fffff]
[ 0.146740] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.146747] pci 0000:00:1c.1: bridge window [mem 0x53400000-0x534fffff]
[ 0.146798] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.146805] pci 0000:00:1c.2: bridge window [mem 0x53500000-0x535fffff]
[ 0.146858] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 0.146866] pci 0000:00:1c.3: bridge window [mem 0x53600000-0x536fffff]
[ 0.146917] pci 0000:06:05.0: [11c1:5811] type 00 class 0x0c0010
[ 0.146938] pci 0000:06:05.0: reg 10: [mem 0x53101000-0x53101fff]
[ 0.147024] pci 0000:06:05.0: supports D1 D2
[ 0.147027] pci 0000:06:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.147053] pci 0000:06:08.0: [8086:1064] type 00 class 0x020000
[ 0.147074] pci 0000:06:08.0: reg 10: [mem 0x53100000-0x53100fff]
[ 0.147086] pci 0000:06:08.0: reg 14: [io 0x1000-0x103f]
[ 0.147161] pci 0000:06:08.0: supports D1 D2
[ 0.147164] pci 0000:06:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.147208] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.147214] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
[ 0.147219] pci 0000:00:1e.0: bridge window [mem 0x53100000-0x531fffff]
[ 0.147227] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.147231] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.147260] pci_bus 0000:00: on NUMA node 0
[ 0.147266] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.147465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.147735] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.147802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.147870] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.147936] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.148039] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.148044] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.148047] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.152485] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.152581] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.152676] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.152768] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.152859] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.152951] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.153045] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.153138] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.153367] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.153374] vgaarb: loaded
[ 0.153377] vgaarb: bridge control possible 0000:01:00.0
[ 0.153377] PCI: Using ACPI for IRQ routing
[ 0.160505] PCI: pci_cache_line_size set to 64 bytes
[ 0.160612] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.160616] reserve RAM buffer: 000000003fe54000 - 000000003fffffff
[ 0.160771] NetLabel: Initializing
[ 0.160775] NetLabel: domain hash size = 128
[ 0.160777] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.160799] NetLabel: unlabeled traffic allowed by default
[ 0.160906] hpet clockevent registered
[ 0.160911] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.160917] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.160924] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.173350] Switching to clocksource hpet
[ 0.182676] pnp: PnP ACPI init
[ 0.182706] ACPI: bus type pnp registered
[ 0.184200] pnp 00:00: [bus 00-ff]
[ 0.184205] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.184209] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.184212] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.184216] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.184219] pnp 00:00: [mem 0x000c0000-0x000fffff window]
[ 0.184223] pnp 00:00: [mem 0xf0000000-0xfbffffff window]
[ 0.184229] pnp 00:00: [mem 0x40000000-0xe0000000 window]
[ 0.184297] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.184317] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.184321] pnp 00:01: [mem 0xfed13000-0xfed13fff]
[ 0.184324] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.184327] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.184330] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.184333] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.184336] pnp 00:01: [mem 0xfed20000-0xfed9ffff]
[ 0.184412] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.184417] system 00:01: [mem 0xfed13000-0xfed13fff] has been reserved
[ 0.184421] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.184425] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.184429] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.184432] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.184436] system 00:01: [mem 0xfed20000-0xfed9ffff] has been reserved
[ 0.184442] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.184642] pnp 00:02: [io 0x0000-0x000f]
[ 0.184646] pnp 00:02: [io 0x0081-0x0083]
[ 0.184649] pnp 00:02: [io 0x0087]
[ 0.184652] pnp 00:02: [io 0x0089-0x008b]
[ 0.184655] pnp 00:02: [io 0x008f]
[ 0.184658] pnp 00:02: [io 0x00c0-0x00df]
[ 0.184661] pnp 00:02: [dma 4]
[ 0.184706] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.184723] pnp 00:03: [io 0x0070-0x0071]
[ 0.184726] pnp 00:03: [io 0x0074-0x0077]
[ 0.184740] pnp 00:03: [irq 8]
[ 0.184783] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.184802] pnp 00:04: [io 0x00f0]
[ 0.184810] pnp 00:04: [irq 13]
[ 0.184854] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.184871] pnp 00:05: [io 0x0061]
[ 0.184919] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.184938] pnp 00:06: [io 0x0500-0x053f]
[ 0.184942] pnp 00:06: [io 0x0400-0x047f]
[ 0.184945] pnp 00:06: [io 0x0092]
[ 0.184948] pnp 00:06: [io 0x0680-0x06ff]
[ 0.184951] pnp 00:06: [io 0x0010-0x001f]
[ 0.184954] pnp 00:06: [io 0x0072-0x0073]
[ 0.184956] pnp 00:06: [io 0x0080]
[ 0.184959] pnp 00:06: [io 0x0084-0x0086]
[ 0.184962] pnp 00:06: [io 0x0088]
[ 0.184965] pnp 00:06: [io 0x008c-0x008e]
[ 0.184968] pnp 00:06: [io 0x0090-0x009f]
[ 0.185047] system 00:06: [io 0x0500-0x053f] has been reserved
[ 0.185051] system 00:06: [io 0x0400-0x047f] has been reserved
[ 0.185055] system 00:06: [io 0x0680-0x06ff] has been reserved
[ 0.185061] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.185320] pnp 00:07: [io 0x0378-0x037f]
[ 0.185329] pnp 00:07: [irq 7]
[ 0.185426] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.185514] pnp 00:08: [irq 12]
[ 0.185563] pnp 00:08: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.185600] pnp 00:09: [io 0x0060]
[ 0.185604] pnp 00:09: [io 0x0064]
[ 0.185611] pnp 00:09: [irq 1]
[ 0.185661] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.185822] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.185831] pnp 00:0a: [irq 4]
[ 0.185938] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.185964] pnp 00:0b: [mem 0xfec00000-0xfec000ff]
[ 0.186015] pnp 00:0b: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.186047] pnp: PnP ACPI: found 12 devices
[ 0.186049] ACPI: ACPI bus type pnp unregistered
[ 0.224576] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.224583] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.224623] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02-02] add_size 200000
[ 0.224635] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03-03] add_size 1000
[ 0.224640] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
[ 0.224651] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000
[ 0.224656] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000
[ 0.224667] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 05-05] add_size 1000
[ 0.224672] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-05] add_size 200000
[ 0.224692] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.224696] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.224701] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.224705] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.224709] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.224713] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.224717] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.224726] pci 0000:00:1c.0: BAR 15: assigned [mem 0x53700000-0x539fffff pref]
[ 0.224731] pci 0000:00:1c.1: BAR 15: assigned [mem 0x53a00000-0x53bfffff 64bit pref]
[ 0.224736] pci 0000:00:1c.2: BAR 15: assigned [mem 0x53c00000-0x53dfffff 64bit pref]
[ 0.224740] pci 0000:00:1c.3: BAR 15: assigned [mem 0x53e00000-0x53ffffff 64bit pref]
[ 0.224745] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.224750] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.224754] pci 0000:00:1c.3: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.224761] pci 0000:01:00.0: BAR 6: assigned [mem 0x53080000-0x530fffff pref]
[ 0.224765] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.224770] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.224775] pci 0000:00:01.0: bridge window [mem 0x52000000-0x530fffff]
[ 0.224780] pci 0000:00:01.0: bridge window [mem 0x40000000-0x51ffffff pref]
[ 0.224788] pci 0000:02:00.0: BAR 6: assigned [mem 0x53700000-0x5370ffff pref]
[ 0.224791] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.224796] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.224802] pci 0000:00:1c.0: bridge window [mem 0x53200000-0x532fffff]
[ 0.224807] pci 0000:00:1c.0: bridge window [mem 0x53700000-0x539fffff pref]
[ 0.224815] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.224819] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.224825] pci 0000:00:1c.1: bridge window [mem 0x53400000-0x534fffff]
[ 0.224831] pci 0000:00:1c.1: bridge window [mem 0x53a00000-0x53bfffff 64bit pref]
[ 0.224838] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.224842] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
[ 0.224849] pci 0000:00:1c.2: bridge window [mem 0x53500000-0x535fffff]
[ 0.224854] pci 0000:00:1c.2: bridge window [mem 0x53c00000-0x53dfffff 64bit pref]
[ 0.224861] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 0.224865] pci 0000:00:1c.3: bridge window [io 0x7000-0x7fff]
[ 0.224872] pci 0000:00:1c.3: bridge window [mem 0x53600000-0x536fffff]
[ 0.224877] pci 0000:00:1c.3: bridge window [mem 0x53e00000-0x53ffffff 64bit pref]
[ 0.224885] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.224889] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
[ 0.224895] pci 0000:00:1e.0: bridge window [mem 0x53100000-0x531fffff]
[ 0.224959] pci 0000:00:1e.0: setting latency timer to 64
[ 0.224966] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.224969] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.224974] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.224977] pci_bus 0000:01: resource 1 [mem 0x52000000-0x530fffff]
[ 0.224980] pci_bus 0000:01: resource 2 [mem 0x40000000-0x51ffffff pref]
[ 0.224984] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.224987] pci_bus 0000:02: resource 1 [mem 0x53200000-0x532fffff]
[ 0.224990] pci_bus 0000:02: resource 2 [mem 0x53700000-0x539fffff pref]
[ 0.224994] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.224997] pci_bus 0000:03: resource 1 [mem 0x53400000-0x534fffff]
[ 0.225001] pci_bus 0000:03: resource 2 [mem 0x53a00000-0x53bfffff 64bit pref]
[ 0.225004] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
[ 0.225007] pci_bus 0000:04: resource 1 [mem 0x53500000-0x535fffff]
[ 0.225011] pci_bus 0000:04: resource 2 [mem 0x53c00000-0x53dfffff 64bit pref]
[ 0.225014] pci_bus 0000:05: resource 0 [io 0x7000-0x7fff]
[ 0.225018] pci_bus 0000:05: resource 1 [mem 0x53600000-0x536fffff]
[ 0.225021] pci_bus 0000:05: resource 2 [mem 0x53e00000-0x53ffffff 64bit pref]
[ 0.225025] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
[ 0.225028] pci_bus 0000:06: resource 1 [mem 0x53100000-0x531fffff]
[ 0.225031] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
[ 0.225035] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[ 0.225091] NET: Registered protocol family 2
[ 0.225171] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.225391] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.225895] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.226187] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.226190] TCP: reno registered
[ 0.226195] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.226208] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.226329] NET: Registered protocol family 1
[ 0.226637] pci 0000:01:00.0: Boot video device
[ 0.226698] pci 0000:06:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.226709] PCI: CLS 0 bytes, default 64
[ 0.226780] Unpacking initramfs...
[ 0.315303] Freeing initrd memory: 2900k freed
[ 0.317191] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 0.317195] apm: disabled - APM is not SMP safe.
[ 0.317515] audit: initializing netlink socket (disabled)
[ 0.317533] type=2000 audit(1342552654.316:1): initialized
[ 0.317976] highmem bounce pool size: 64 pages
[ 0.317984] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.320723] VFS: Disk quotas dquot_6.5.2
[ 0.320797] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.320931] msgmni has been set to 1740
[ 0.321235] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.321282] io scheduler noop registered
[ 0.321287] io scheduler deadline registered
[ 0.321299] io scheduler cfq registered (default)
[ 0.321473] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.321588] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.321708] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.321830] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.321950] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[ 0.322243] GHES: HEST is not enabled!
[ 0.322264] isapnp: Scanning for PnP cards...
[ 0.678327] isapnp: No Plug & Play device found
[ 0.678412] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.698985] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.720023] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.720384] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.723503] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.723558] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.723755] mousedev: PS/2 mouse device common for all mice
[ 0.723869] rtc_cmos 00:03: RTC can wake from S4
[ 0.724031] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.724060] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.724098] cpuidle: using governor ladder
[ 0.724101] cpuidle: using governor menu
[ 0.724316] TCP: cubic registered
[ 0.724489] NET: Registered protocol family 10
[ 0.724741] NET: Registered protocol family 17
[ 0.724748] Registering the dns_resolver key type
[ 0.724796] Using IPI No-Shortcut mode
[ 0.724971] PM: Hibernation image not present or could not be loaded.
[ 0.724985] registered taskstats version 1
[ 0.725540] rtc_cmos 00:03: setting system clock to 2012-07-17 19:17:35 UTC (1342552655)
[ 0.725588] Initializing network drop monitor service
[ 0.726860] Freeing unused kernel memory: 524k freed
[ 0.727195] Write protecting the kernel text: 3812k
[ 0.727226] Write protecting the kernel read-only data: 1120k
[ 0.740567] systemd-udevd[41]: starting version 186
[ 0.742721] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.745749] SCSI subsystem initialized
[ 0.749328] libata version 3.00 loaded.
[ 0.750857] ahci 0000:02:00.0: version 3.0
[ 0.750961] ahci 0000:02:00.0: irq 45 for MSI/MSI-X
[ 0.751021] ahci: SSS flag set, parallel bus scan disabled
[ 0.751069] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.751077] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 0.752850] scsi0 : ahci
[ 0.753200] scsi1 : ahci
[ 0.753383] ata1: SATA max UDMA/133 abar m512@0x53200000 port 0x53200100 irq 45
[ 0.753391] ata2: SATA max UDMA/133 abar m512@0x53200000 port 0x53200180 irq 45
[ 1.240043] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.252105] ata1.00: ATA-8: OCZ-SOLID3, 2.15, max UDMA/133
[ 1.252110] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.262069] ata1.00: configured for UDMA/133
[ 1.262262] scsi 0:0:0:0: Direct-Access ATA OCZ-SOLID3 2.15 PQ: 0 ANSI: 5
[ 1.264029] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.264196] sd 0:0:0:0: [sda] Write Protect is off
[ 1.264203] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.264257] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.265654] sda: sda1 sda2 sda3 sda4
[ 1.266383] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.320034] Refined TSC clocksource calibration: 2999.980 MHz.
[ 1.320041] Switching to clocksource tsc
[ 1.746702] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.747318] ata2.00: ATA-8: ST3000DM001-9YN166, CC4C, max UDMA/133
[ 1.747323] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.747889] ata2.00: configured for UDMA/133
[ 1.748030] scsi 1:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4C PQ: 0 ANSI: 5
[ 1.748540] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 1.748547] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.748667] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.748674] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.748725] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.793835] sdb: sdb1
[ 1.794347] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.892420] usbcore: registered new interface driver usbfs
[ 1.892471] usbcore: registered new interface driver hub
[ 1.895559] ata_piix 0000:00:1f.1: version 2.13
[ 1.895639] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.897473] usbcore: registered new device driver usb
[ 1.898382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.898429] scsi2 : ata_piix
[ 1.899754] scsi3 : ata_piix
[ 1.900600] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
[ 1.900605] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
[ 1.900676] ata4: port disabled--ignoring
[ 1.901417] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.901473] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.904508] scsi4 : ata_piix
[ 1.905087] scsi5 : ata_piix
[ 1.905220] ata5: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
[ 1.905227] ata6: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
[ 1.905347] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.905355] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.905401] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.905444] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.905558] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.909355] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.909393] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x53304000
[ 1.916865] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.917873] hub 1-0:1.0: USB hub found
[ 1.917883] hub 1-0:1.0: 8 ports detected
[ 1.918079] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.918087] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.918109] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.918149] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[ 1.918445] hub 2-0:1.0: USB hub found
[ 1.918456] hub 2-0:1.0: 2 ports detected
[ 1.918663] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.918671] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.918692] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.918728] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[ 1.919043] hub 3-0:1.0: USB hub found
[ 1.919053] hub 3-0:1.0: 2 ports detected
[ 1.919306] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.919314] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.919338] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.919391] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 1.919771] hub 4-0:1.0: USB hub found
[ 1.919781] hub 4-0:1.0: 2 ports detected
[ 1.920058] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.920066] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.920085] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.920162] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[ 1.920720] hub 5-0:1.0: USB hub found
[ 1.920731] hub 5-0:1.0: 2 ports detected
[ 2.068266] ata6.00: ATA-6: WDC WD2000JD-00HBB0, 08.02D08, max UDMA/133
[ 2.068272] ata6.00: 390721968 sectors, multi 16: LBA48
[ 2.074099] ata5.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[ 2.074104] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.081454] ata6.00: configured for UDMA/133
[ 2.100167] ata5.01: ATA-8: ST3500418AS, CC34, max UDMA/133
[ 2.100172] ata5.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.107102] ata5.00: configured for UDMA/133
[ 2.162850] ata5.01: configured for UDMA/133
[ 2.173642] ata3.00: ATAPI: SONY DVD RW DRU-530A, 2.1g, max UDMA/33
[ 2.173649] ata3.01: ATAPI: LITE-ON DVDRW SOHW-1633S, BGS4, max UDMA/66
[ 2.173654] ata3.01: limited to UDMA/33 due to 40-wire cable
[ 2.186862] ata3.00: configured for UDMA/33
[ 2.200194] ata3.01: configured for UDMA/33
[ 2.201725] scsi 2:0:0:0: CD-ROM SONY DVD RW DRU-530A 2.1g PQ: 0 ANSI: 5
[ 2.202839] scsi 2:0:1:0: CD-ROM LITE-ON DVDRW SOHW-1633S BGS4 PQ: 0 ANSI: 5
[ 2.203271] scsi 4:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
[ 2.203548] sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.203557] sd 4:0:0:0: [sdc] 4096-byte physical blocks
[ 2.203683] sd 4:0:0:0: [sdc] Write Protect is off
[ 2.203690] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.203749] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.203803] scsi 4:0:1:0: Direct-Access ATA ST3500418AS CC34 PQ: 0 ANSI: 5
[ 2.204553] scsi 5:0:0:0: Direct-Access ATA WDC WD2000JD-00H 08.0 PQ: 0 ANSI: 5
[ 2.204737] sd 4:0:1:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.204849] sd 5:0:0:0: [sde] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 2.204969] sd 5:0:0:0: [sde] Write Protect is off
[ 2.204976] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2.205029] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.223374] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[ 2.225847] sdc: sdc1
[ 2.225864] sd 4:0:1:0: [sdd] Write Protect is off
[ 2.225872] sd 4:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.225944] sd 4:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.226606] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 2.242524] sdd: sdd1
[ 2.243011] sd 4:0:1:0: [sdd] Attached SCSI disk
[ 2.250598] sde: sde2 sde3 < sde5 sde6 >
[ 2.251325] sd 5:0:0:0: [sde] Attached SCSI disk
[ 2.263852] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 2.263860] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.265692] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.269125] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.270115] sr 2:0:1:0: Attached scsi CD-ROM sr1
[ 2.453377] usb 1-3: new high-speed USB device number 3 using ehci_hcd
[ 2.630176] input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.1/input/input1
[ 2.630296] generic-usb 0003:1058:1102.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:1d.7-3/input1
[ 2.630361] usbcore: registered new interface driver usbhid
[ 2.630366] usbhid: USB HID core driver
[ 2.720033] usb 1-5: new high-speed USB device number 4 using ehci_hcd
[ 2.992001] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.123459] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 3.170371] systemd[1]: systemd 186 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP; arch)
[ 3.189960] systemd[1]: Inserted module 'autofs4'
[ 3.190421] systemd[1]: Set hostname to <bbq>.
[ 3.347408] systemd[1]: Cannot add dependency job for unit exportfs.service, ignoring: Unit exportfs.service failed to load: No such file or directory. See system logs and 'systemctl status exportfs.service' for details.
[ 3.347444] systemd[1]: Cannot add dependency job for unit arch-daemons.target, ignoring: Unit arch-daemons.target failed to load: No such file or directory. See system logs and 'systemctl status arch-daemons.target' for details.
[ 3.347509] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 3.600924] systemd-readahead[134]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
[ 3.890242] systemd-udevd[139]: starting version 186
[ 3.928976] systemd-journald[146]: Fixed max_use=50.2M max_size=6.2M min_size=64.0K keep_free=25.1M
[ 3.929449] systemd-journald[146]: Vacuuming...
[ 4.016020] FS-Cache: Loaded
[ 4.026904] RPC: Registered named UNIX socket transport module.
[ 4.026909] RPC: Registered udp transport module.
[ 4.026912] RPC: Registered tcp transport module.
[ 4.026914] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.068138] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 4.071885] NFS: Registering the id_resolver key type
[ 4.071920] FS-Cache: Netfs 'nfs' registered for caching
[ 4.090493] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 4.103300] Installing knfsd (copyright (C) 1996 [email protected]).
[ 4.106821] ACPI: Sleep Button [SLPB]
[ 4.114494] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.114509] ACPI: Power Button [PWRF]
[ 4.135074] parport_pc 00:07: reported by Plug and Play ACPI
[ 4.135106] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 4.157067] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 4.178255] Linux agpgart interface v0.103
[ 4.202375] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[ 4.203197] hda_intel: Disabling MSI
[ 4.255263] intel_rng: Firmware space is locked read-only. If you can't or
[ 4.255267] intel_rng: don't want to disable this in firmware setup, and if
[ 4.255271] intel_rng: you are certain that your system has a functional
[ 4.255274] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 4.273750] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 4.273757] e100: Copyright(c) 1999-2006 Intel Corporation
[ 4.274079] iTCO_vendor_support: vendor-support=0
[ 4.285411] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 4.285661] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0460)
[ 4.285769] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.380102] usbcore: registered new interface driver uas
[ 4.415911] Initializing USB Mass Storage driver...
[ 4.423630] scsi6 : usb-storage 1-3:1.0
[ 4.423883] usbcore: registered new interface driver usb-storage
[ 4.423888] USB Mass Storage support registered.
[ 4.426642] e100 0000:06:08.0: eth0: addr 0x53100000, irq 20, MAC addr 00:11:11:9d:19:91
[ 4.434273] scsi7 : usb-storage 1-5:1.0
[ 4.434499] usbcore: registered new interface driver ums-cypress
[ 4.475410] psmouse serio1: hgpk: ID: 10 00 64
[ 4.480175] firewire_ohci 0000:06:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 4.487522] microcode: CPU0 sig=0xf41, pf=0x10, revision=0xd
[ 4.506728] Registered IR keymap rc-ati-x10
[ 4.507019] input: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/rc/rc0/input5
[ 4.507357] rc0: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/rc/rc0
[ 4.507587] input: X10 Wireless Technology Inc USB Receiver mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input6
[ 4.507783] usbcore: registered new interface driver ati_remote
[ 4.530507] psmouse serio1: logips2pp: Detected unknown Logitech mouse model 127
[ 4.687581] ppdev: user-space parallel port driver
[ 4.761362] Adding 1047928k swap on /dev/sda2. Priority:-1 extents:1 across:1047928k SS
[ 4.804984] microcode: CPU1 sig=0xf41, pf=0x10, revision=0xd
[ 4.814875] nvidia: module license 'NVIDIA' taints kernel.
[ 4.814882] Disabling lock debugging due to kernel taint
[ 4.822000] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 4.926478] fuse init (API version 7.18)
[ 4.970217] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[ 4.971016] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[ 4.971676] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[ 4.971943] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 4.980870] firewire_core 0000:06:05.0: created device fw0: GUID 00111100009d1991, S400
[ 4.981627] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 4.982035] NVRM: loading NVIDIA UNIX x86 Kernel Module 302.17 Tue Jun 12 18:37:51 PDT 2012
[ 5.031213] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input11
[ 5.432483] scsi 6:0:0:0: Direct-Access WD My Book 1028 PQ: 0 ANSI: 4
[ 5.436924] sd 6:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 5.437226] scsi 7:0:0:0: Direct-Access WDC WD25 00JB-00GVA0 PQ: 0 ANSI: 0
[ 5.438100] sd 7:0:0:0: [sdg] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 5.439101] sd 7:0:0:0: [sdg] Write Protect is off
[ 5.439109] sd 7:0:0:0: [sdg] Mode Sense: 33 00 00 00
[ 5.439482] sd 6:0:0:0: [sdf] Write Protect is off
[ 5.439489] sd 6:0:0:0: [sdf] Mode Sense: 10 00 00 00
[ 5.440101] sd 7:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5.442224] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.463763] sdg: sdg1 sdg2
[ 5.467100] sd 7:0:0:0: [sdg] Attached SCSI disk
[ 5.469267] sdf: sdf1
[ 5.491846] sd 6:0:0:0: [sdf] Attached SCSI disk
[ 36.480046] usb 1-5: reset high-speed USB device number 4 using ehci_hcd
[ 37.347138] systemd-journald[146]: Fixed max_use=1.4G max_size=128.0M min_size=64.0K keep_free=765.3M
[ 37.347165] systemd-journald[146]: Flushing to /var...
[ 37.837240] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
[ 37.906826] EXT4-fs (sdg2): mounted filesystem with ordered data mode. Opts: (null)
[ 38.068461] EXT4-fs (sde6): mounted filesystem with ordered data mode. Opts: (null)
[ 38.194403] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 38.740678] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 38.747081] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[ 39.486016] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 39.599796] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 39.600119] NFSD: starting 90-second grace period
[ 40.579508] Netfilter messages via NETLINK v0.30.
[ 40.594917] nf_conntrack version 0.5.0 (16078 buckets, 64312 max)
[ 40.746099] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 40.747318] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 40.747325] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 40.786415] ctnetlink v0.93: registering with nfnetlink.
[ 40.886321] ip_set: protocol 6
[ 40.898284] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 41.762042] xt_time: kernel timezone is -0000
[ 42.318176] Bridge firewalling registered
[ 42.704278] u32 classifier
[ 42.704284] input device check on
[ 42.704287] Actions configured
[ 43.154527] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 43.156826] e100 0000:06:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[ 43.157214] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 44.557798] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 44.872612] [drm] Initialized drm 1.1.0 20060810
[ 44.881629] wmi: Mapper loaded
[ 51.096207] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 51.105163] zram: Unknown parameter `zram_num_devices'
[ 51.148183] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 51.148690] zram: Creating 2 devices ...
[ 51.398897] Adding 514496k swap on /dev/zram0. Priority:100 extents:1 across:514496k SS
[ 51.406500] Adding 514496k swap on /dev/zram1. Priority:100 extents:1 across:514496k SS
[ 76.005728] bootchart-collector started as pid 1586 with 2 args: '--dump' '/tmp/bootchart.94K3Fb6yom'
[ 76.005734] Extracting profile data from pid 178
[ 76.005736] map 0xbfe14000 -> 0xbfe35000 size: 132k from 'bfe14000' 'bfe35000'
[ 76.005739] read 135168 bytes of 135168
[ 76.005741] reading 101 chunks (of 101) ... wrote 12527 kb
[ 76.005743] bootchart-collector pid: 1586 unmounted proc / clean exit
Linux 3.3.8-1, Nvidia 295.49-1 Dmesg Output
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 5 13:24:07 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe54000 (usable)
[ 0.000000] BIOS-e820: 000000003fe54000 - 000000003fee8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fee8000 - 000000003ff00000 (ACPI data)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: 507GR /D915GAG, BIOS AG91510J.15A.0816.2005.0214.1818 02/14/2005
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3fe54 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00fe650] fe650
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
[ 0.000000] RAMDISK: 3fb70000 - 3fe44000
[ 0.000000] Allocated new RAMDISK: 3752a000 - 377fd833
[ 0.000000] Move RAMDISK from 000000003fb70000 - 000000003fe43832 to 3752a000 - 377fd832
[ 0.000000] ACPI: RSDP 000fe020 00014 (v00 GATEWA)
[ 0.000000] ACPI: RSDT 3fefde48 00038 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
[ 0.000000] ACPI: FACP 3fefcf10 00074 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
[ 0.000000] ACPI: DSDT 3fef8010 0339C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
[ 0.000000] ACPI: FACS 3fee5c40 00040
[ 0.000000] ACPI: APIC 3fefce10 00068 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
[ 0.000000] ACPI: WDDT 3fef7f90 00040 (v01 GATEWA 04DT037 00000330 MSFT 01000013)
[ 0.000000] ACPI: MCFG 3fef7f10 0003C (v01 GATEWA 04DT037 00000330 MSFT 01000013)
[ 0.000000] ACPI: SSDT 3fef6d90 00124 (v01 GATEWA CpuPm 00000330 MSFT 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 134MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003fe54
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fe54
[ 0.000000] On node 0 totalpages: 261603
[ 0.000000] free_area_init_node: node 0, pgdat c060c580, node_mem_map f6d29200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 269 pages used for memmap
[ 0.000000] HighMem zone: 34121 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:c0100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6d08000 s30848 r0 d22400 u53248
[ 0.000000] pcpu-alloc: s30848 r0 d22400 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259558
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/10f8033d-8fe9-46be-bccf-68a14025bbaa ro init=/bin/systemd
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2093600 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003fe54)
[ 0.000000] Memory: 1025660k/1046864k available (3774k kernel code, 20752k reserved, 1434k data, 520k init, 137560k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0617000 - 0xc0699000 ( 520 kB)
[ 0.000000] .data : 0xc04af9a9 - 0xc0616400 (1434 kB)
[ 0.000000] .text : 0xc0100000 - 0xc04af9a9 (3774 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3000.097 MHz processor.
[ 0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.20 BogoMIPS (lpj=10000323)
[ 0.006674] pid_max: default: 32768 minimum: 301
[ 0.006706] Security Framework initialized
[ 0.006712] AppArmor: AppArmor disabled by boot time parameter
[ 0.006735] Mount-cache hash table entries: 512
[ 0.006921] Initializing cgroup subsys cpuacct
[ 0.006925] Initializing cgroup subsys memory
[ 0.006936] Initializing cgroup subsys devices
[ 0.006939] Initializing cgroup subsys freezer
[ 0.006942] Initializing cgroup subsys net_cls
[ 0.006945] Initializing cgroup subsys blkio
[ 0.006989] CPU: Physical Processor ID: 0
[ 0.006992] CPU: Processor Core ID: 0
[ 0.006995] mce: CPU supports 4 MCE banks
[ 0.007009] CPU0: Thermal monitoring enabled (TM1)
[ 0.007014] using mwait in idle threads.
[ 0.010636] ACPI: Core revision 20120111
[ 0.013347] ftrace: allocating 16622 entries in 33 pages
[ 0.020077] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020459] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054563] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
[ 0.056663] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.056663] ... version: 0
[ 0.056663] ... bit width: 40
[ 0.056663] ... generic registers: 18
[ 0.056663] ... value mask: 000000ffffffffff
[ 0.056663] ... max period: 0000007fffffffff
[ 0.056663] ... fixed-purpose events: 0
[ 0.056663] ... event mask: 000000000003ffff
[ 0.073415] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.100018] CPU 1 irqstacks, hard=f64a4000 soft=f64a6000
[ 0.100021] Booting Node 0, Processors #1 Ok.
[ 0.100025] smpboot cpu 1: start_ip = 9a000
[ 0.009999] Initializing CPU#1
[ 0.113372] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.120000] Brought up 2 CPUs
[ 0.120006] Total of 2 processors activated (12005.40 BogoMIPS).
[ 0.120978] devtmpfs: initialized
[ 0.120978] PM: Registering ACPI NVS region at 3fe54000 (606208 bytes)
[ 0.120978] NET: Registered protocol family 16
[ 0.120978] ACPI: bus type pci registered
[ 0.120978] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.120978] PCI: not using MMCONFIG
[ 0.123293] PCI: Using configuration type 1 for base access
[ 0.126717] bio: create slab <bio-0> at 0
[ 0.126739] ACPI: Added _OSI(Module Device)
[ 0.126739] ACPI: Added _OSI(Processor Device)
[ 0.126739] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.126739] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.127496] ACPI: EC: Look up EC in DSDT
[ 0.127496] ACPI: Interpreter enabled
[ 0.127496] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.127496] ACPI: Using IOAPIC for interrupt routing
[ 0.127496] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.127496] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.127496] PCI: Using MMCONFIG for extended config space
[ 0.131872] ACPI: No dock devices found.
[ 0.131883] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.133334] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.136111] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.136116] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.136120] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.136123] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000fffff] (ignored)
[ 0.136127] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff] (ignored)
[ 0.136131] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xe0000000] (ignored)
[ 0.136134] PCI: root bus 00: using default resources
[ 0.136196] PCI host bridge to bus 0000:00
[ 0.136201] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.136206] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.136220] pci 0000:00:00.0: [8086:2580] type 0 class 0x000600
[ 0.136283] pci 0000:00:01.0: [8086:2581] type 1 class 0x000604
[ 0.136340] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.13639And here is the output of alsa-info.sh which I have also added to the original post:
upload=true&script=true&cardinfo=
!!ALSA Information Script v 0.4.61
!!Script ran on: Wed Jul 18 00:10:56 UTC 2012
!!Linux Distribution
Arch Linux \r (\l) DISTRIB_ID=archlinux DISTRIB_DESCRIPTION="Arch Linux" NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="http://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
!!DMI Information
Manufacturer:
Product Name: 507GR
Product Version:
Firmware Version: AG91510J.15A.0816.2005.0214.1818
!!Kernel Information
Kernel release: 3.4.4-3-ARCH
Operating System: GNU/Linux
Architecture: i686
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
Driver version: 1.0.25
Library version: 1.0.25
Utilities version: 1.0.25
!!Loaded ALSA modules
snd_hda_intel
snd_hda_intel
!!Sound Servers on this system
Jack:
Installed - Yes (/usr/bin/jackd)
Running - No
!!Soundcards recognised by ALSA
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0x53300000 irq 46
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0x53000000 irq 17
!!PCI Soundcards installed in the system
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
00:1b.0 0403: 8086:2668 (rev 03)
Subsystem: 107b:4037
01:00.1 0403: 10de:0be3 (rev a1)
Subsystem: 1043:8354
!!Loaded sound module options
!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
power_save : 0
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
snoop : Y
!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
power_save : 0
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
snoop : Y
!!HDA-Intel Codec information
--startcollapse--
Codec: Realtek ALC880
Address: 2
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x10ec0880
Subsystem Id: 0x08600000
Revision Id: 0x90000
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x05 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Node 0x07 [Vendor Defined Widget] wcaps 0xf0051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
Amp-In vals:
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 0
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 7
0x18 0x19 0x1a* 0x1b 0x1c 0x14 0x15
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 10
0x18 0x19 0x1a 0x1b 0x1c* 0x0b 0x14 0x15 0x16 0x17
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Unsolicited: tag=00, enabled=0
Connection: 1
0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=5, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=5, ofs=0
Amp-In caps: ofs=0x23, nsteps=0x41, stepsize=0x03, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0xa3 0xa3] [0x80 0x80] [0x80 0x80]
Connection: 8
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Connection: 2
0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Connection: 2
0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Connection: 2
0x05 0x0b
Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
Connection: 4
0x0c* 0x0d 0x0e 0x0f
Node 0x11 [Audio Selector] wcaps 0x300101: Stereo
Connection: 4
0x0c* 0x0d 0x0e 0x0f
Node 0x12 [Audio Selector] wcaps 0x300101: Stereo
Connection: 4
0x0c* 0x0d 0x0e 0x0f
Node 0x13 [Audio Selector] wcaps 0x300101: Stereo
Connection: 4
0x0c* 0x0d 0x0e 0x0f
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
Pin Default 0x00000000: [Jack] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x0, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0c
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
Pin Default 0x00000000: [Jack] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x0, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0d
Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
Pin Default 0x00000000: [Jack] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x0, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0e
Node 0x17 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
Pin Default 0x00000000: [Jack] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x0, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 0
Node 0x18 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 80
Pin Default 0x00000000: [Jack] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x0, Sequence = 0x0
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x10
Node 0x19 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 80
Pin Default 0x00000000: [Jack] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x0, Sequence = 0x0
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x11
Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Control: name="Line Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 80
Pin Default 0x01810000: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Unknown
DefAssociation = 0x0, Sequence = 0x0
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=01, enabled=1
Connection: 1
0x12
Node 0x1b [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 80
Pin Default 0x00000000: [Jack] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x0, Sequence = 0x0
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x13
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x40000000: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x0, Sequence = 0x0
Pin-ctls: 0x00:
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x00000000: [Jack] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x0, Sequence = 0x0
Pin-ctls: 0x00:
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
Pincap 0x00000010: OUT
Pin Default 0x00000000: [Jack] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x0, Sequence = 0x0
Pin-ctls: 0x00:
Connection: 1
0x06
Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
Pincap 0x00000020: IN
Pin Default 0x00000000: [Jack] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x0, Sequence = 0x0
Pin-ctls: 0x00:
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=10
Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono
Volume-Knob: delta=0, steps=64, direct=0, val=0
Unsolicited: tag=00, enabled=0
Connection: 0
Codec: Nvidia GPU 0b HDMI/DP
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x10de000b
Subsystem Id: 0x10de0101
Revision Id: 0x100200
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Unsolicited: tag=00, enabled=0
Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=01, enabled=1
Connection: 1
0x04
Codec: Nvidia GPU 0b HDMI/DP
Address: 1
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x10de000b
Subsystem Id: 0x10de0101
Revision Id: 0x100200
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Unsolicited: tag=00, enabled=0
Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=1, device=0
Control: name="IEC958 Playback Pro Mask", index=1, device=0
Control: name="IEC958 Playback Default", index=1, device=0
Control: name="IEC958 Playback Switch", index=1, device=0
Control: name="ELD", index=0, device=7
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=01, enabled=1
Connection: 1
0x04
Codec: Nvidia GPU 0b HDMI/DP
Address: 2
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x10de000b
Subsystem Id: 0x10de0101
Revision Id: 0x100200
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Unsolicited: tag=00, enabled=0
Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=2, device=0
Control: name="IEC958 Playback Pro Mask", index=2, device=0
Control: name="IEC958 Playback Default", index=2, device=0
Control: name="IEC958 Playback Switch", index=2, device=0
Control: name="ELD", index=0, device=8
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=01, enabled=1
Connection: 1
0x04
Codec: Nvidia GPU 0b HDMI/DP
Address: 3
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x10de000b
Subsystem Id: 0x10de0101
Revision Id: 0x100200
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x04 [Audio Output] wcaps 0x72b1: 8-Channels Digital Stripe CP
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Unsolicited: tag=00, enabled=0
Node 0x05 [Pin Complex] wcaps 0x407381: 8-Channels Digital CP
Control: name="HDMI/DP,pcm=9 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=3, device=0
Control: name="IEC958 Playback Pro Mask", index=3, device=0
Control: name="IEC958 Playback Default", index=3, device=0
Control: name="IEC958 Playback Switch", index=3, device=0
Control: name="ELD", index=0, device=9
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=01, enabled=1
Connection: 1
0x04
--endcollapse--
!!ALSA Device nodes
crw-rw----+ 1 root audio 116, 3 Jul 17 17:07 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 12 Jul 17 17:07 /dev/snd/controlC1
crw-rw----+ 1 root audio 116, 2 Jul 17 17:07 /dev/snd/hwC0D2
crw-rw----+ 1 root audio 116, 11 Jul 17 17:07 /dev/snd/hwC1D0
crw-rw----+ 1 root audio 116, 10 Jul 17 17:07 /dev/snd/hwC1D1
crw-rw----+ 1 root audio 116, 9 Jul 17 17:07 /dev/snd/hwC1D2
crw-rw----+ 1 root audio 116, 8 Jul 17 17:07 /dev/snd/hwC1D3
crw-rw----+ 1 root audio 116, 7 Jul 17 17:07 /dev/snd/pcmC1D3p
crw-rw----+ 1 root audio 116, 6 Jul 17 17:07 /dev/snd/pcmC1D7p
crw-rw----+ 1 root audio 116, 5 Jul 17 17:07 /dev/snd/pcmC1D8p
crw-rw----+ 1 root audio 116, 4 Jul 17 17:07 /dev/snd/pcmC1D9p
crw-rw---- 1 root audio 116, 1 Jul 17 17:07 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Jul 17 17:07 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 80 Jul 17 17:07 .
drwxr-xr-x 3 root root 320 Jul 17 17:07 ..
lrwxrwxrwx 1 root root 12 Jul 17 17:07 pci-0000:00:1b.0 -> ../controlC0
lrwxrwxrwx 1 root root 12 Jul 17 17:07 pci-0000:01:00.1 -> ../controlC1
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
!!Amixer output
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0x53300000 irq 46'
Mixer name : 'Realtek ALC880'
Components : 'HDA:10ec0880,08600000,00090000'
Controls : 4
Simple ctrls : 2
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 65
Mono:
Front Left: Playback 35 [54%] [0.00dB] [off]
Front Right: Playback 35 [54%] [0.00dB] [off]
!!-------Mixer controls for card 1 [NVidia]
Card hw:1 'NVidia'/'HDA NVidia at 0x53000000 irq 17'
Mixer name : 'Nvidia GPU 0b HDMI/DP'
Components : 'HDA:10de000b,10de0101,00100200'
Controls : 24
Simple ctrls : 4
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',2
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',3
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
!!Alsactl output
--startcollapse--
state.Intel {
control.1 {
iface MIXER
name 'Beep Playback Volume'
value.0 35
value.1 35
comment {
access 'read write'
type INTEGER
count 2
range '0 - 65'
dbmin -3500
dbmax 3000
dbvalue.0 0
dbvalue.1 0
control.2 {
iface MIXER
name 'Beep Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.3 {
iface CARD
name 'Line Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.4 {
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 0
dbvalue.1 0
state.NVidia {
control.1 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.2 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.3 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.4 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.5 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.6 {
iface PCM
device 3
name ELD
value ''
comment {
access read
type BYTES
count 0
control.7 {
iface CARD
name 'HDMI/DP,pcm=7 Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.8 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 1
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.9 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 1
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.10 {
iface MIXER
name 'IEC958 Playback Default'
index 1
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.11 {
iface MIXER
name 'IEC958 Playback Switch'
index 1
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.12 {
iface PCM
device 7
name ELD
value ''
comment {
access read
type BYTES
count 0
control.13 {
iface CARD
name 'HDMI/DP,pcm=8 Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.14 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 2
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.15 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 2
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.16 {
iface MIXER
name 'IEC958 Playback Default'
index 2
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.17 {
iface MIXER
name 'IEC958 Playback Switch'
index 2
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.18 {
iface PCM
device 8
name ELD
value ''
comment {
access read
type BYTES
count 0
control.19 {
iface CARD
name 'HDMI/DP,pcm=9 Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.20 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 3
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.21 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 3
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.22 {
iface MIXER
name 'IEC958 Playback Default'
index 3
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.23 {
iface MIXER
name 'IEC958 Playback Switch'
index 3
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.24 {
iface PCM
device 9
name ELD
value ''
comment {
access read
type BYTES
count 0
--endcollapse--
!!All Loaded Modules
Module
zram
lm85
hwmon_vid
aes_i586
cryptd
aes_generic
act_police
cls_basic
cls_flow
cls_fw
cls_u32
sch_tbf
sch_prio
sch_htb
sch_hfsc
sch_ingress
sch_sfq
bridge
stp
llc
xt_statistic
xt_CT
xt_LOG
xt_time
xt_connlimit
xt_realm
xt_addrtype
iptable_raw
xt_comment
xt_recent
xt_policy
ipt_ULOG
ipt_REJECT
ipt_REDIRECT
ipt_NETMAP
ipt_MASQUERADE
ipt_ECN
ipt_CLUSTERIP
ipt_ah
xt_set
ip_set
nf_nat_tftp
nf_nat_snmp_basic
nf_conntrack_snmp
nf_nat_sip
nf_nat_pptp
nf_nat_proto_gre
nf_nat_irc
nf_nat_h323
nf_nat_ftp
nf_nat_amanda
ts_kmp
nf_conntrack_amanda
nf_conntrack_sane
nf_conntrack_tftp
nf_conntrack_sip
nf_conntrack_proto_udplite
nf_conntrack_proto_sctp
nf_conntrack_pptp
nf_conntrack_proto_gre
nf_conntrack_netlink
nf_conntrack_netbios_ns
nf_conntrack_broadcast
nf_conntrack_irc
nf_conntrack_h323
nf_conntrack_ftp
xt_TPROXY
nf_defrag_ipv6
nf_tproxy_core
ip6_tables
xt_tcpmss
xt_pkttype
xt_physdev
xt_owner
xt_NFQUEUE
xt_NFLOG
nfnetlink_log
xt_multiport
xt_mark
xt_mac
xt_limit
xt_length
xt_iprange
xt_helper
xt_hashlimit
xt_DSCP
xt_dscp
xt_dccp
xt_conntrack
xt_connmark
xt_CLASSIFY
xt_AUDIT
xt_state
iptable_nat
nf_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_conntrack
iptable_mangle
nfnetlink
xt_tcpudp
iptable_filter
ip_tables
x_tables
arc4
fuse
nvidia
snd_hda_codec_hdmi
ppdev
ath9k_htc
ath9k_common
microcode
ath9k_hw
ath
serio_raw
psmouse
evdev
mac80211
ums_cypress
cfg80211
compat
usb_storage
rfkill
i2c_i801
uas
rc_ati_x10
iTCO_wdt
firewire_ohci
ati_remote
iTCO_vendor_support
e100
firewire_core
mii
rc_core
crc_itu_t
snd_hda_codec_realtek
parport_pc
parport
snd_hda_intel
snd_hda_codec
snd_pcm
snd_page_alloc
snd_hwdep
snd_timer
nfsd
exportfs
intel_agp
intel_gtt
snd
nfs
i2c_core
agpgart
nfs_acl
lockd
soundcore
auth_rpcgss
button
processor
sunrpc
fscache
autofs4
ext4
crc16
jbd2
mbcache
usbhid
hid
sr_mod
cdrom
pata_acpi
ata_generic
uhci_hcd
ata_piix
ehci_hcd
usbcore
usb_common
sd_mod
ahci
libahci
libata
scsi_mod
!!Sysfs Files
/sys/class/sound/hwC0D2/init_pin_configs:
0x14 0x00000000
0x15 0x00000000
0x16 0x00000000
0x17 0x00000000
0x18 0x00000000
0x19 0x00000000
0x1a 0x01810000
0x1b 0x00000000
0x1c 0x40000000
0x1d 0x00000000
0x1e 0x00000000
0x1f 0x00000000
/sys/class/sound/hwC0D2/driver_pin_configs:
/sys/class/sound/hwC0D2/user_pin_configs:
/sys/class/sound/hwC0D2/init_verbs:
/sys/class/sound/hwC1D0/init_pin_configs:
0x05 0x18560010
/sys/class/sound/hwC1D0/driver_pin_configs:
/sys/class/sound/hwC1D0/user_pin_configs:
/sys/class/sound/hwC1D0/init_verbs:
/sys/class/sound/hwC1D1/init_pin_configs:
0x05 0x18560010
/sys/class/sound/hwC1D1/driver_pin_configs:
/sys/class/sound/hwC1D1/user_pin_configs:
/sys/class/sound/hwC1D1/init_verbs:
/sys/class/sound/hwC1D2/init_pin_configs:
0x05 0x18560010
/sys/class/sound/hwC1D2/driver_pin_configs:
/sys/class/sound/hwC1D2/user_pin_configs:
/sys/class/sound/hwC1D2/init_verbs:
/sys/class/sound/hwC1D3/init_pin_configs:
0x05 0x18560010
/sys/class/sound/hwC1D3/driver_pin_configs:
/sys/class/sound/hwC1D3/user_pin_configs:
/sys/class/sound/hwC1D3/init_verbs:
!!ALSA/HDA dmesg
[ 3.398568] Installing knfsd (copyright (C) 1996 [email protected]).
[ 3.431145] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 3.462799] parport_pc 00:07: reported by Plug and Play ACPI
[ 3.462832] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 3.467010] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[ 3.468096] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 3.471112] hda_intel: Disabling MSI
[ 3.522125] intel_rng: Firmware space is locked read-only. If you can't or
[ 4.173059] ath9k_htc 1-2:1.0: ath9k_htc: HTC initialized with 45 credits
[ 4.263632] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[ 4.263914] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[ 4.264134] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 4.264423] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 4.267027] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
I'll also see what kind of help I can get from the developers upstream. -
[Closed]Bumblebee - Failed to initialize the NVIDIA GPU
Hi,
I'am having trouble with bumblebee. When i ran
optirun glxgears -info
I get the following error,
[ 66.574]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 66.574] X Protocol Version 11, Revision 0
[ 66.574] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 66.574] Current Operating System: Linux archlinux 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
[ 66.574] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=2136b55a-3c0b-4a13-a536-86d195e15fa8 ro
[ 66.574] Build Date: 01 July 2013 10:48:42AM
[ 66.574]
[ 66.574] Current version of pixman: 0.30.0
[ 66.574] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 66.574] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 66.574] (==) Log file: "/var/log/Xorg.8.log", Time: Tue Jul 30 19:25:29 2013
[ 66.589] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 66.589] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 66.607] (==) ServerLayout "Layout0"
[ 66.607] (==) No screen section available. Using defaults.
[ 66.607] (**) |-->Screen "Default Screen Section" (0)
[ 66.607] (**) | |-->Monitor "<default monitor>"
[ 66.607] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 66.607] (**) | |-->Device "DiscreteNvidia"
[ 66.607] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 66.607] (**) Option "AutoAddDevices" "false"
[ 66.607] (**) Option "AutoAddGPU" "false"
[ 66.607] (**) Not automatically adding devices
[ 66.607] (==) Automatically enabling devices
[ 66.607] (**) Not automatically adding GPU devices
[ 66.607] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 66.607] Entry deleted from font path.
[ 66.607] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 66.607] Entry deleted from font path.
[ 66.607] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 66.607] Entry deleted from font path.
[ 66.607] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 66.607] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 66.607] Entry deleted from font path.
[ 66.607] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 66.607] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 66.607] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 66.607] (==) |-->Input Device "<default pointer>"
[ 66.607] (==) |-->Input Device "<default keyboard>"
[ 66.607] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 66.607] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 66.607] (II) Loader magic: 0x7fdc20
[ 66.607] (II) Module ABI versions:
[ 66.607] X.Org ANSI C Emulation: 0.4
[ 66.607] X.Org Video Driver: 14.1
[ 66.607] X.Org XInput driver : 19.1
[ 66.607] X.Org Server Extension : 7.0
[ 66.607] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 66.608] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 66.608] setversion 1.4 failed
[ 66.609] (--) PCI:*(0:1:0:0) 10de:0fd4:1462:10d7 rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 66.609] Initializing built-in extension Generic Event Extension
[ 66.609] Initializing built-in extension SHAPE
[ 66.609] Initializing built-in extension MIT-SHM
[ 66.609] Initializing built-in extension XInputExtension
[ 66.609] Initializing built-in extension XTEST
[ 66.609] Initializing built-in extension BIG-REQUESTS
[ 66.609] Initializing built-in extension SYNC
[ 66.609] Initializing built-in extension XKEYBOARD
[ 66.609] Initializing built-in extension XC-MISC
[ 66.609] Initializing built-in extension SECURITY
[ 66.609] Initializing built-in extension XINERAMA
[ 66.609] Initializing built-in extension XFIXES
[ 66.609] Initializing built-in extension RENDER
[ 66.609] Initializing built-in extension RANDR
[ 66.609] Initializing built-in extension COMPOSITE
[ 66.609] Initializing built-in extension DAMAGE
[ 66.609] Initializing built-in extension MIT-SCREEN-SAVER
[ 66.609] Initializing built-in extension DOUBLE-BUFFER
[ 66.609] Initializing built-in extension RECORD
[ 66.609] Initializing built-in extension DPMS
[ 66.609] Initializing built-in extension X-Resource
[ 66.609] Initializing built-in extension XVideo
[ 66.609] Initializing built-in extension XVideo-MotionCompensation
[ 66.609] Initializing built-in extension XFree86-VidModeExtension
[ 66.609] Initializing built-in extension XFree86-DGA
[ 66.609] Initializing built-in extension XFree86-DRI
[ 66.609] Initializing built-in extension DRI2
[ 66.609] (II) LoadModule: "glx"
[ 66.622] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 67.248] (II) Module glx: vendor="NVIDIA Corporation"
[ 67.248] compiled for 4.0.2, module version = 1.0.0
[ 67.248] Module class: X.Org Server Extension
[ 67.248] (II) NVIDIA GLX Module 319.32 Wed Jun 19 14:55:38 PDT 2013
[ 67.257] Loading extension GLX
[ 67.257] (II) LoadModule: "nvidia"
[ 67.258] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 67.346] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 67.346] compiled for 4.0.2, module version = 1.0.0
[ 67.346] Module class: X.Org Video Driver
[ 67.354] (II) LoadModule: "mouse"
[ 67.354] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 67.357] (II) Module mouse: vendor="X.Org Foundation"
[ 67.357] compiled for 1.14.0, module version = 1.9.0
[ 67.357] Module class: X.Org XInput Driver
[ 67.357] ABI class: X.Org XInput driver, version 19.1
[ 67.357] (II) LoadModule: "kbd"
[ 67.358] (WW) Warning, couldn't open module kbd
[ 67.358] (II) UnloadModule: "kbd"
[ 67.358] (II) Unloading kbd
[ 67.358] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 67.358] (II) NVIDIA dlloader X Driver 319.32 Wed Jun 19 14:34:12 PDT 2013
[ 67.358] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 67.359] (--) using VT number 7
[ 67.367] (II) Loading sub module "fb"
[ 67.367] (II) LoadModule: "fb"
[ 67.367] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 67.367] (II) Module fb: vendor="X.Org Foundation"
[ 67.368] compiled for 1.14.2, module version = 1.0.0
[ 67.368] ABI class: X.Org ANSI C Emulation, version 0.4
[ 67.368] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 67.368] (II) Loading sub module "wfb"
[ 67.368] (II) LoadModule: "wfb"
[ 67.368] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 67.376] (II) Module wfb: vendor="X.Org Foundation"
[ 67.376] compiled for 1.14.2, module version = 1.0.0
[ 67.377] ABI class: X.Org ANSI C Emulation, version 0.4
[ 67.377] (II) Loading sub module "shadow"
[ 67.377] (II) LoadModule: "shadow"
[ 67.377] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 67.377] (II) Module shadow: vendor="X.Org Foundation"
[ 67.377] compiled for 1.14.2, module version = 1.1.0
[ 67.377] ABI class: X.Org ANSI C Emulation, version 0.4
[ 67.377] (II) Loading sub module "ramdac"
[ 67.377] (II) LoadModule: "ramdac"
[ 67.377] (II) Module "ramdac" already built-in
[ 67.378] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 67.378] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 67.378] (==) NVIDIA(0): RGB weight 888
[ 67.378] (==) NVIDIA(0): Default visual is TrueColor
[ 67.378] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 67.378] (**) NVIDIA(0): Option "NoLogo" "true"
[ 67.378] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 67.379] (**) NVIDIA(0): Option "UseEDID" "false"
[ 67.379] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 67.379] (**) NVIDIA(0): Enabling 2D acceleration
[ 67.379] (**) NVIDIA(0): Ignoring EDIDs
[ 67.379] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 67.379] (**) NVIDIA(0): mode
[ 72.511] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 72.511] (EE) NVIDIA(0): check your system's kernel log for additional error
[ 72.511] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
[ 72.511] (EE) NVIDIA(0): README for additional information.
[ 72.511] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[ 72.511] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 72.512] (II) UnloadModule: "nvidia"
[ 72.512] (II) UnloadSubModule: "shadow"
[ 72.512] (II) UnloadSubModule: "wfb"
[ 72.512] (II) UnloadSubModule: "fb"
[ 72.512] (EE) Screen(s) found, but none have a usable configuration.
[ 72.512] (EE)
Fatal server error:
[ 72.512] (EE) no screens found(EE)
[ 72.512] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 72.512] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 72.512] (EE)
[ 72.512] (EE) Server terminated with error (1). Closing log file.
This is /etc/bumblebee/bumblebee.conf file;
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
In addition
dmesg | grep nvidia
does not return anything and
modprobe nvidia
returns
modprobe: ERROR: could not insert 'nvidia': No such device
There is no /etc/X11/xorg.conf file.
Last edited by Selo (2013-07-30 19:41:25)Hello, I also I have that problem.
$primusrun glxgears
primus: fatal: Bumblebee daemon reported: error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
$grep -Fn '(EE' /var/log/Xorg.8.log
15: (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
105:[ 875.659] (EE) Failed to load module "mouse" (module does not exist, 0)
110:[ 875.659] (EE) Failed to load module "kbd" (module does not exist, 0)
153:[ 880.312] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
154:[ 880.312] (EE) NVIDIA(0): check your system's kernel log for additional error
155:[ 880.312] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
156:[ 880.312] (EE) NVIDIA(0): README for additional information.
157:[ 880.312] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
158:[ 880.312] (EE) NVIDIA(0): Failing initialization of X screen 0
163:[ 880.312] (EE) Screen(s) found, but none have a usable configuration.
164:[ 880.312] (EE)
166:[ 880.312] (EE) no screens found(EE)
167:[ 880.312] (EE)
171:[ 880.312] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
172:[ 880.313] (EE)
173:[ 880.313] (EE) Server terminated with error (1). Closing log file. -
[Solved]xorg fails to start, integrated nvidia gpu with intel
Arch 32 Bit system
When i start X server it says server terminated succesfully.
the output of "lspci | grep VGA"
00:02:0 VGA Compatible Controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00:0 VGA Compatible Controller: NVIDIA Corporation GF108M [GrForce GT 540M] (rev a1)
I installed xf86-video-modesettings xf86-video-fbdev nvidia nvidia-libgl nvidia-utils xorg-server xorg-server-utils xorg-xinit xterm xorg-twm xorg-xclock
I guess the problem is monitor cant be detected but i dont know how can i make nvidia to find it. Look at Monitor section at 10-nvidia.conf and also Xorg.0.log.
xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 337.12 (buildmeister@swio-display-x64-rhel04-18) Fri Apr 4 15:15:13 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
xorg.conf.d/10-nvidia.conf
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:1:0:0"
EndSection
xorg.conf.d/10-evdev.conf
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
xorg.conf.d/10-quirks.conf
# Collection of quirks and blacklist/whitelists for specific devices.
# Accelerometer device, posts data through ABS_X/ABS_Y, making X unusable
# http://bugs.freedesktop.org/show_bug.cgi?id=22442
Section "InputClass"
Identifier "ThinkPad HDAPS accelerometer blacklist"
MatchProduct "ThinkPad HDAPS accelerometer data"
Option "Ignore" "on"
EndSection
xorg.conf.d/50-synaptics.conf
# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
# Option "OptionName" "value"
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
MatchDevicePath "/dev/input/event*"
EndSection
Section "InputClass"
Identifier "touchpad ignore duplicates"
MatchIsTouchpad "on"
MatchOS "Linux"
MatchDevicePath "/dev/input/mouse*"
Option "Ignore" "on"
EndSection
# This option enables the bottom right corner to be a right button on
# non-synaptics clickpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Default clickpad buttons"
MatchDriver "synaptics"
Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
# To disable the bottom edge area so the buttons only work as buttons,
# not for movement, set the AreaBottomEdge
# Option "AreaBottomEdge" "82%"
EndSection
# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Disable clickpad buttons on Apple touchpads"
MatchProduct "Apple|bcm5974"
MatchDriver "synaptics"
Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSection
And finally
/var/log/Xorg.0.log
[ 37.622]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 37.622] X Protocol Version 11, Revision 0
[ 37.622] Build Operating System: Linux 3.14.0-4-ARCH i686
[ 37.622] Current Operating System: Linux Ceset-PC 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 21:01:08 CEST 2014 i686
[ 37.622] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c4bc1b1f-6e34-413e-bd2a-202d403c593d rw quiet
[ 37.623] Build Date: 14 April 2014 08:41:02AM
[ 37.623]
[ 37.623] Current version of pixman: 0.32.4
[ 37.623] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 37.623] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 37.624] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 28 14:31:33 2014
[ 37.644] (==) Using config file: "/etc/X11/xorg.conf"
[ 37.644] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 37.680] (==) ServerLayout "Layout0"
[ 37.680] (**) |-->Screen "Screen0" (0)
[ 37.680] (**) | |-->Monitor "Monitor0"
[ 37.680] (**) | |-->Device "Device0"
[ 37.680] (**) |-->Input Device "Keyboard0"
[ 37.681] (**) |-->Input Device "Mouse0"
[ 37.681] (==) Automatically adding devices
[ 37.681] (==) Automatically enabling devices
[ 37.681] (==) Automatically adding GPU devices
[ 37.725] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 37.725] Entry deleted from font path.
[ 37.726] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 37.726] Entry deleted from font path.
[ 37.726] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 37.726] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 37.726] Entry deleted from font path.
[ 37.726] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 37.726] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 37.726] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 37.726] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 37.726] (WW) Disabling Keyboard0
[ 37.726] (WW) Disabling Mouse0
[ 37.727] (II) Loader magic: 0x8264660
[ 37.727] (II) Module ABI versions:
[ 37.727] X.Org ANSI C Emulation: 0.4
[ 37.727] X.Org Video Driver: 15.0
[ 37.727] X.Org XInput driver : 20.0
[ 37.727] X.Org Server Extension : 8.0
[ 37.727] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 37.728] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 37.731] (--) PCI:*(0:0:2:0) 8086:0116:1025:0511 rev 9, Mem @ 0xd1400000/4194304, 0xc0000000/268435456, I/O @ 0x00003000/64
[ 37.731] (--) PCI: (0:1:0:0) 10de:0df4:1025:0512 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 37.732] (II) Open ACPI successful (/var/run/acpid.socket)
[ 37.732] Initializing built-in extension Generic Event Extension
[ 37.732] Initializing built-in extension SHAPE
[ 37.732] Initializing built-in extension MIT-SHM
[ 37.732] Initializing built-in extension XInputExtension
[ 37.733] Initializing built-in extension XTEST
[ 37.733] Initializing built-in extension BIG-REQUESTS
[ 37.733] Initializing built-in extension SYNC
[ 37.733] Initializing built-in extension XKEYBOARD
[ 37.733] Initializing built-in extension XC-MISC
[ 37.733] Initializing built-in extension SECURITY
[ 37.733] Initializing built-in extension XINERAMA
[ 37.733] Initializing built-in extension XFIXES
[ 37.733] Initializing built-in extension RENDER
[ 37.733] Initializing built-in extension RANDR
[ 37.734] Initializing built-in extension COMPOSITE
[ 37.734] Initializing built-in extension DAMAGE
[ 37.734] Initializing built-in extension MIT-SCREEN-SAVER
[ 37.734] Initializing built-in extension DOUBLE-BUFFER
[ 37.734] Initializing built-in extension RECORD
[ 37.734] Initializing built-in extension DPMS
[ 37.734] Initializing built-in extension Present
[ 37.736] Initializing built-in extension DRI3
[ 37.739] Initializing built-in extension X-Resource
[ 37.741] Initializing built-in extension XVideo
[ 37.743] Initializing built-in extension XVideo-MotionCompensation
[ 37.745] Initializing built-in extension XFree86-VidModeExtension
[ 37.747] Initializing built-in extension XFree86-DGA
[ 37.748] Initializing built-in extension XFree86-DRI
[ 37.750] Initializing built-in extension DRI2
[ 37.750] (II) LoadModule: "glx"
[ 37.765] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 38.573] (II) Module glx: vendor="NVIDIA Corporation"
[ 38.573] compiled for 4.0.2, module version = 1.0.0
[ 38.573] Module class: X.Org Server Extension
[ 38.573] (II) NVIDIA GLX Module 337.12 Fri Apr 4 14:32:00 PDT 2014
[ 38.575] Loading extension GLX
[ 38.575] (II) LoadModule: "nvidia"
[ 38.575] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 38.641] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 38.641] compiled for 4.0.2, module version = 1.0.0
[ 38.641] Module class: X.Org Video Driver
[ 38.652] (II) NVIDIA dlloader X Driver 337.12 Fri Apr 4 14:10:20 PDT 2014
[ 38.653] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 38.654] (++) using VT number 2
[ 38.655] (II) Loading sub module "fb"
[ 38.655] (II) LoadModule: "fb"
[ 38.656] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 38.668] (II) Module fb: vendor="X.Org Foundation"
[ 38.668] compiled for 1.15.1, module version = 1.0.0
[ 38.668] ABI class: X.Org ANSI C Emulation, version 0.4
[ 38.668] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 38.668] (II) Loading sub module "wfb"
[ 38.668] (II) LoadModule: "wfb"
[ 38.669] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 38.671] (II) Module wfb: vendor="X.Org Foundation"
[ 38.671] compiled for 1.15.1, module version = 1.0.0
[ 38.671] ABI class: X.Org ANSI C Emulation, version 0.4
[ 38.671] (II) Loading sub module "ramdac"
[ 38.671] (II) LoadModule: "ramdac"
[ 38.671] (II) Module "ramdac" already built-in
[ 38.675] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 38.675] (==) NVIDIA(0): RGB weight 888
[ 38.675] (==) NVIDIA(0): Default visual is TrueColor
[ 38.675] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 38.676] (**) NVIDIA(0): Enabling 2D acceleration
[ 45.267] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
[ 45.268] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 45.270] (II) NVIDIA(0): NVIDIA GPU GeForce GT 540M (GF108) at PCI:1:0:0 (GPU-0)
[ 45.270] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 45.270] (--) NVIDIA(0): VideoBIOS: 70.08.3c.00.19
[ 45.270] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 45.275] (--) NVIDIA(0): Valid display device(s) on GeForce GT 540M at PCI:1:0:0
[ 45.275] (--) NVIDIA(0): CRT-0 (boot, connected)
[ 45.275] (--) NVIDIA(0): DFP-0
[ 45.275] (--) NVIDIA(0): DFP-1
[ 45.275] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 45.275] (--) NVIDIA(0): DFP-0: Internal LVDS
[ 45.275] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 45.275] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 45.275] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 45.275] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 45.275] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 45.275] (**) NVIDIA(0): all display devices.)
[ 45.276] (==) NVIDIA(0):
[ 45.276] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 45.276] (==) NVIDIA(0): will be used as the requested mode.
[ 45.276] (==) NVIDIA(0):
[ 45.277] (II) NVIDIA(0): Validated MetaModes:
[ 45.277] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 45.277] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 45.281] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 45.281] (WW) NVIDIA(0): from CRT-0's EDID.
[ 45.281] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 45.281] (--) Depth 24 pixmap format is 32 bpp
[ 45.281] (II) NVIDIA: Using 1024.00 MB of virtual memory for indirect memory
[ 45.281] (II) NVIDIA: access.
[ 45.499] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 45.544] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 45.544] Loading extension NV-GLX
[ 45.648] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 45.649] (==) NVIDIA(0): Backing store enabled
[ 45.649] (==) NVIDIA(0): Silken mouse enabled
[ 45.651] (**) NVIDIA(0): DPMS enabled
[ 45.651] Loading extension NV-CONTROL
[ 45.651] Loading extension XINERAMA
[ 45.651] (II) Loading sub module "dri2"
[ 45.651] (II) LoadModule: "dri2"
[ 45.651] (II) Module "dri2" already built-in
[ 45.651] (II) NVIDIA(0): [DRI2] Setup complete
[ 45.652] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 45.652] (--) RandR disabled
[ 45.673] (II) Initializing extension GLX
[ 45.973] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 45.973] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 45.973] (II) LoadModule: "evdev"
[ 45.989] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 46.007] (II) Module evdev: vendor="X.Org Foundation"
[ 46.007] compiled for 1.15.0, module version = 2.8.2
[ 46.007] Module class: X.Org XInput Driver
[ 46.007] ABI class: X.Org XInput driver, version 20.0
[ 46.007] (II) Using input driver 'evdev' for 'Power Button'
[ 46.007] (**) Power Button: always reports core events
[ 46.007] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 46.007] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 46.007] (--) evdev: Power Button: Found keys
[ 46.007] (II) evdev: Power Button: Configuring as keyboard
[ 46.007] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 46.007] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 46.007] (**) Option "xkb_rules" "evdev"
[ 46.007] (**) Option "xkb_model" "pc104"
[ 46.007] (**) Option "xkb_layout" "us"
[ 46.062] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 46.063] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 46.063] (II) Using input driver 'evdev' for 'Video Bus'
[ 46.063] (**) Video Bus: always reports core events
[ 46.063] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 46.063] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 46.063] (--) evdev: Video Bus: Found keys
[ 46.063] (II) evdev: Video Bus: Configuring as keyboard
[ 46.063] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
[ 46.063] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 46.063] (**) Option "xkb_rules" "evdev"
[ 46.063] (**) Option "xkb_model" "pc104"
[ 46.063] (**) Option "xkb_layout" "us"
[ 46.064] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 46.064] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 46.064] (II) Using input driver 'evdev' for 'Power Button'
[ 46.064] (**) Power Button: always reports core events
[ 46.064] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 46.064] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 46.064] (--) evdev: Power Button: Found keys
[ 46.064] (II) evdev: Power Button: Configuring as keyboard
[ 46.064] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2/event1"
[ 46.064] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 46.064] (**) Option "xkb_rules" "evdev"
[ 46.064] (**) Option "xkb_model" "pc104"
[ 46.064] (**) Option "xkb_layout" "us"
[ 46.066] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 46.066] (II) No input driver specified, ignoring this device.
[ 46.066] (II) This device may have been added with another device file.
[ 46.066] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 46.066] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 46.066] (II) Using input driver 'evdev' for 'Sleep Button'
[ 46.066] (**) Sleep Button: always reports core events
[ 46.066] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 46.066] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 46.066] (--) evdev: Sleep Button: Found keys
[ 46.066] (II) evdev: Sleep Button: Configuring as keyboard
[ 46.066] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input4/event3"
[ 46.067] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 46.067] (**) Option "xkb_rules" "evdev"
[ 46.067] (**) Option "xkb_model" "pc104"
[ 46.067] (**) Option "xkb_layout" "us"
[ 46.068] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 46.068] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 46.068] (II) Using input driver 'evdev' for 'Video Bus'
[ 46.068] (**) Video Bus: always reports core events
[ 46.068] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 46.068] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 46.068] (--) evdev: Video Bus: Found keys
[ 46.068] (II) evdev: Video Bus: Configuring as keyboard
[ 46.068] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:01/input/input16/event14"
[ 46.068] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
[ 46.068] (**) Option "xkb_rules" "evdev"
[ 46.068] (**) Option "xkb_model" "pc104"
[ 46.068] (**) Option "xkb_layout" "us"
[ 46.069] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 46.069] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 46.070] (II) config/udev: Adding input device 1.3M HD WebCam (/dev/input/event6)
[ 46.070] (**) 1.3M HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 46.070] (II) Using input driver 'evdev' for '1.3M HD WebCam'
[ 46.070] (**) 1.3M HD WebCam: always reports core events
[ 46.070] (**) evdev: 1.3M HD WebCam: Device: "/dev/input/event6"
[ 46.070] (--) evdev: 1.3M HD WebCam: Vendor 0x58f Product 0xb002
[ 46.070] (--) evdev: 1.3M HD WebCam: Found keys
[ 46.070] (II) evdev: 1.3M HD WebCam: Configuring as keyboard
[ 46.070] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input8/event6"
[ 46.070] (II) XINPUT: Adding extended input device "1.3M HD WebCam" (type: KEYBOARD, id 11)
[ 46.070] (**) Option "xkb_rules" "evdev"
[ 46.070] (**) Option "xkb_model" "pc104"
[ 46.070] (**) Option "xkb_layout" "us"
[ 46.071] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 46.071] (II) No input driver specified, ignoring this device.
[ 46.071] (II) This device may have been added with another device file.
[ 46.072] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[ 46.072] (II) No input driver specified, ignoring this device.
[ 46.072] (II) This device may have been added with another device file.
[ 46.072] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 46.072] (II) No input driver specified, ignoring this device.
[ 46.072] (II) This device may have been added with another device file.
[ 46.073] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 46.073] (II) No input driver specified, ignoring this device.
[ 46.073] (II) This device may have been added with another device file.
[ 46.073] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 46.073] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 46.073] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 46.074] (**) AT Translated Set 2 keyboard: always reports core events
[ 46.074] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 46.074] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 46.074] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 46.074] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 46.074] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 46.074] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 46.074] (**) Option "xkb_rules" "evdev"
[ 46.074] (**) Option "xkb_model" "pc104"
[ 46.074] (**) Option "xkb_layout" "us"
[ 46.075] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[ 46.075] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 46.075] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 46.075] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 46.075] (II) LoadModule: "synaptics"
[ 46.075] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 46.092] (II) Module synaptics: vendor="X.Org Foundation"
[ 46.092] compiled for 1.15.0, module version = 1.7.4
[ 46.092] Module class: X.Org XInput Driver
[ 46.092] ABI class: X.Org XInput driver, version 20.0
[ 46.092] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 46.092] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 46.092] (**) Option "Device" "/dev/input/event15"
[ 46.250] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5774 (res 56)
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5022 (res 105)
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 46.250] (**) Option "TapButton1" "1"
[ 46.250] (**) Option "TapButton2" "2"
[ 46.250] (**) Option "TapButton3" "3"
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 46.250] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 46.316] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event15"
[ 46.316] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 46.317] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 46.317] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 46.317] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[ 46.317] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 46.317] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 46.317] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 46.317] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 46.317] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 46.318] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 46.318] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 46.319] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 46.319] (II) No input driver specified, ignoring this device.
[ 46.319] (II) This device may have been added with another device file.
[ 46.319] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event8)
[ 46.319] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 46.320] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 46.320] (**) Acer WMI hotkeys: always reports core events
[ 46.320] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event8"
[ 46.320] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 46.320] (--) evdev: Acer WMI hotkeys: Found keys
[ 46.320] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 46.320] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event8"
[ 46.320] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 14)
[ 46.320] (**) Option "xkb_rules" "evdev"
[ 46.320] (**) Option "xkb_model" "pc104"
[ 46.320] (**) Option "xkb_layout" "us"
[ 46.321] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event9)
[ 46.321] (II) No input driver specified, ignoring this device.
[ 46.321] (II) This device may have been added with another device file.
[ 46.321] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 46.321] (II) No input driver specified, ignoring this device.
[ 46.321] (II) This device may have been added with another device file.
[ 57.547] (II) evdev: Acer WMI hotkeys: Close
[ 57.547] (II) UnloadModule: "evdev"
[ 57.547] (II) UnloadModule: "synaptics"
[ 57.547] (II) evdev: AT Translated Set 2 keyboard: Close
[ 57.547] (II) UnloadModule: "evdev"
[ 57.548] (II) evdev: 1.3M HD WebCam: Close
[ 57.548] (II) UnloadModule: "evdev"
[ 57.548] (II) evdev: Video Bus: Close
[ 57.548] (II) UnloadModule: "evdev"
[ 57.548] (II) evdev: Sleep Button: Close
[ 57.548] (II) UnloadModule: "evdev"
[ 57.548] (II) evdev: Power Button: Close
[ 57.548] (II) UnloadModule: "evdev"
[ 57.548] (II) evdev: Video Bus: Close
[ 57.548] (II) UnloadModule: "evdev"
[ 57.548] (II) evdev: Power Button: Close
[ 57.548] (II) UnloadModule: "evdev"
[ 57.580] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 57.589] (EE) Server terminated successfully (0). Closing log file.
Last edited by hozturk0327 (2014-04-28 14:32:36)I realized that instead of this
xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --auto
i used
xrandr --setprovideroutputsource NVIDIA-0
xrandr --auto
Now it is fixed.
And sorry Kartious i thought i uploaded ~/.xinitrc.
EDIT:
uname -a outputs
Linux Ceset-PC 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 21:01:08: CEST 2014 i686 GNU/Linux
Also this is the new Xorg.0.log
[ 17.166]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 17.166] X Protocol Version 11, Revision 0
[ 17.166] Build Operating System: Linux 3.14.0-4-ARCH i686
[ 17.167] Current Operating System: Linux Ceset-PC 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 21:01:08 CEST 2014 i686
[ 17.167] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c4bc1b1f-6e34-413e-bd2a-202d403c593d rw quiet
[ 17.167] Build Date: 14 April 2014 08:41:02AM
[ 17.167]
[ 17.167] Current version of pixman: 0.32.4
[ 17.167] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17.167] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW.) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17.168] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 28 16:45:17 2014
[ 17.210] (==) Using config file: "/etc/X11/xorg.conf"
[ 17.210] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 17.246] (==) ServerLayout "layout"
[ 17.246] (**) |-->Screen "nvidia" (0)
[ 17.246] (**) | |-->Monitor "<default monitor>"
[ 17.247] (**) | |-->Device "nvidia"
[ 17.247] (==) No monitor specified for screen "nvidia".
Using a default monitor configuration.
[ 17.247] (**) |-->Inactive Device "intel"
[ 17.247] (==) Automatically adding devices
[ 17.247] (==) Automatically enabling devices
[ 17.247] (==) Automatically adding GPU devices
[ 17.290] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 17.291] Entry deleted from font path.
[ 17.292] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 17.292] Entry deleted from font path.
[ 17.292] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 17.292] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 17.292] Entry deleted from font path.
[ 17.292] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 17.292] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 17.292] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 17.292] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 17.293] (II) Loader magic: 0x8264660
[ 17.293] (II) Module ABI versions:
[ 17.293] X.Org ANSI C Emulation: 0.4
[ 17.293] X.Org Video Driver: 15.0
[ 17.293] X.Org XInput driver : 20.0
[ 17.293] X.Org Server Extension : 8.0
[ 17.293] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 17.294] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 17.297] (--) PCI:*(0:0:2:0) 8086:0116:1025:0511 rev 9, Mem @ 0xd1400000/4194304, 0xc0000000/268435456, I/O @ 0x00003000/64
[ 17.297] (--) PCI: (0:1:0:0) 10de:0df4:1025:0512 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 17.297] (II) Open ACPI successful (/var/run/acpid.socket)
[ 17.298] Initializing built-in extension Generic Event Extension
[ 17.298] Initializing built-in extension SHAPE
[ 17.298] Initializing built-in extension MIT-SHM
[ 17.298] Initializing built-in extension XInputExtension
[ 17.299] Initializing built-in extension XTEST
[ 17.299] Initializing built-in extension BIG-REQUESTS
[ 17.299] Initializing built-in extension SYNC
[ 17.299] Initializing built-in extension XKEYBOARD
[ 17.299] Initializing built-in extension XC-MISC
[ 17.299] Initializing built-in extension SECURITY
[ 17.299] Initializing built-in extension XINERAMA
[ 17.299] Initializing built-in extension XFIXES
[ 17.299] Initializing built-in extension RENDER
[ 17.299] Initializing built-in extension RANDR
[ 17.300] Initializing built-in extension COMPOSITE
[ 17.300] Initializing built-in extension DAMAGE
[ 17.300] Initializing built-in extension MIT-SCREEN-SAVER
[ 17.300] Initializing built-in extension DOUBLE-BUFFER
[ 17.300] Initializing built-in extension RECORD
[ 17.300] Initializing built-in extension DPMS
[ 17.300] Initializing built-in extension Present
[ 17.302] Initializing built-in extension DRI3
[ 17.305] Initializing built-in extension X-Resource
[ 17.307] Initializing built-in extension XVideo
[ 17.309] Initializing built-in extension XVideo-MotionCompensation
[ 17.311] Initializing built-in extension XFree86-VidModeExtension
[ 17.313] Initializing built-in extension XFree86-DGA
[ 17.314] Initializing built-in extension XFree86-DRI
[ 17.316] Initializing built-in extension DRI2
[ 17.316] (II) LoadModule: "glx"
[ 17.331] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.139] (II) Module glx: vendor="NVIDIA Corporation"
[ 18.139] compiled for 4.0.2, module version = 1.0.0
[ 18.139] Module class: X.Org Server Extension
[ 18.139] (II) NVIDIA GLX Module 337.12 Fri Apr 4 14:32:00 PDT 2014
[ 18.141] Loading extension GLX
[ 18.141] (II) LoadModule: "nvidia"
[ 18.141] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 18.207] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 18.207] compiled for 4.0.2, module version = 1.0.0
[ 18.207] Module class: X.Org Video Driver
[ 18.217] (II) LoadModule: "modesetting"
[ 18.217] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.223] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.223] compiled for 1.15.0, module version = 0.8.1
[ 18.223] Module class: X.Org Video Driver
[ 18.223] ABI class: X.Org Video Driver, version 15.0
[ 18.224] (II) NVIDIA dlloader X Driver 337.12 Fri Apr 4 14:10:20 PDT 2014
[ 18.224] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 18.225] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.225] (++) using VT number 1
[ 18.227] (II) Loading sub module "fb"
[ 18.227] (II) LoadModule: "fb"
[ 18.227] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.234] (II) Module fb: vendor="X.Org Foundation"
[ 18.234] compiled for 1.15.1, module version = 1.0.0
[ 18.234] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.234] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 18.234] (II) Loading sub module "wfb"
[ 18.234] (II) LoadModule: "wfb"
[ 18.235] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 18.237] (II) Module wfb: vendor="X.Org Foundation"
[ 18.237] compiled for 1.15.1, module version = 1.0.0
[ 18.237] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.237] (II) Loading sub module "ramdac"
[ 18.237] (II) LoadModule: "ramdac"
[ 18.237] (II) Module "ramdac" already built-in
[ 18.240] (II) modesetting(1): using drv /dev/dri/card0
[ 18.240] (II) modesetting(G0): using drv /dev/dri/card0
[ 18.240] (EE) Screen 1 deleted because of no matching config section.
[ 18.240] (II) UnloadModule: "modesetting"
[ 18.240] (II) NVIDIA(0): Creating default Display subsection in Screen section
"nvidia" for depth/fbbpp 24/32
[ 18.240] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 18.240] (==) NVIDIA(0): RGB weight 888
[ 18.240] (==) NVIDIA(0): Default visual is TrueColor
[ 18.240] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 18.241] (**) NVIDIA(0): Enabling 2D acceleration
[ 24.989] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
[ 24.989] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 24.992] (II) NVIDIA(0): NVIDIA GPU GeForce GT 540M (GF108) at PCI:1:0:0 (GPU-0)
[ 24.992] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 24.992] (--) NVIDIA(0): VideoBIOS: 70.08.3c.00.19
[ 24.992] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 24.997] (--) NVIDIA(0): Valid display device(s) on GeForce GT 540M at PCI:1:0:0
[ 24.997] (--) NVIDIA(0): CRT-0 (boot, connected)
[ 24.997] (--) NVIDIA(0): DFP-0
[ 24.997] (--) NVIDIA(0): DFP-1
[ 24.997] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 24.997] (--) NVIDIA(0): DFP-0: Internal LVDS
[ 24.997] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 24.997] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 24.997] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 24.997] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 24.997] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 24.997] (**) NVIDIA(0): all display devices.)
[ 25.000] (==) NVIDIA(0):
[ 25.000] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 25.000] (==) NVIDIA(0): will be used as the requested mode.
[ 25.000] (==) NVIDIA(0):
[ 25.001] (II) NVIDIA(0): Validated MetaModes:
[ 25.001] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 25.001] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[ 25.006] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 25.006] (WW) NVIDIA(0): from CRT-0's EDID.
[ 25.006] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 25.006] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
[ 25.006] (==) modesetting(G0): RGB weight 888
[ 25.006] (==) modesetting(G0): Default visual is TrueColor
[ 25.006] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
[ 25.006] (II) modesetting(G0): Output LVDS-1-0 has no monitor section
[ 25.008] (II) modesetting(G0): Output VGA-1-0 has no monitor section
[ 25.009] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
[ 25.009] (II) modesetting(G0): Output DisplayPort-1-0 has no monitor section
[ 25.009] (II) modesetting(G0): EDID for output LVDS-1-0
[ 25.009] (II) modesetting(G0): Manufacturer: AUO Model: 22ec Serial#: 0
[ 25.009] (II) modesetting(G0): Year: 2009 Week: 1
[ 25.009] (II) modesetting(G0): EDID Version: 1.3
[ 25.009] (II) modesetting(G0): Digital Display Input
[ 25.009] (II) modesetting(G0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 25.009] (II) modesetting(G0): Gamma: 2.20
[ 25.009] (II) modesetting(G0): No DPMS capabilities specified
[ 25.009] (II) modesetting(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 25.009] (II) modesetting(G0): First detailed timing is preferred mode
[ 25.009] (II) modesetting(G0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570
[ 25.009] (II) modesetting(G0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 25.009] (II) modesetting(G0): Manufacturer's mask: 0
[ 25.009] (II) modesetting(G0): Supported detailed timing:
[ 25.009] (II) modesetting(G0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 25.009] (II) modesetting(G0): h_active: 1366 h_sync: 1398 h_sync_end 1422 h_blank_end 1432 h_border: 0
[ 25.009] (II) modesetting(G0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 806 v_border: 0
[ 25.009] (II) modesetting(G0): Unknown vendor-specific block f
[ 25.009] (II) modesetting(G0): AUO
[ 25.009] (II) modesetting(G0): B156XW02 V2
[ 25.009] (II) modesetting(G0): EDID (in hex):
[ 25.009] (II) modesetting(G0): 00ffffffffffff0006afec2200000000
[ 25.009] (II) modesetting(G0): 01130103802213780ac8959e57549226
[ 25.009] (II) modesetting(G0): 0f505400000001010101010101010101
[ 25.009] (II) modesetting(G0): 010101010101121b5642500026302018
[ 25.009] (II) modesetting(G0): 340058c1100000180000000f00000000
[ 25.009] (II) modesetting(G0): 00000000000000000020000000fe0041
[ 25.009] (II) modesetting(G0): 554f0a202020202020202020000000fe
[ 25.009] (II) modesetting(G0): 004231353658573032205632200a00c0
[ 25.009] (II) modesetting(G0): Printing probed modes for output LVDS-1-0
[ 25.009] (II) modesetting(G0): Modeline "1366x768"x60.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP)
[ 25.009] (II) modesetting(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 25.010] (II) modesetting(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 25.010] (II) modesetting(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 25.010] (II) modesetting(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 25.010] (II) modesetting(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 25.010] (II) modesetting(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 25.010] (II) modesetting(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 25.011] (II) modesetting(G0): EDID for output VGA-1-0
[ 25.011] (II) modesetting(G0): EDID for output HDMI-1-0
[ 25.011] (II) modesetting(G0): EDID for output DisplayPort-1-0
[ 25.011] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 25.011] (==) modesetting(G0): DPI set to (96, 96)
[ 25.011] (II) Loading sub module "fb"
[ 25.012] (II) LoadModule: "fb"
[ 25.012] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.012] (II) Module fb: vendor="X.Org Foundation"
[ 25.012] compiled for 1.15.1, module version = 1.0.0
[ 25.012] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.012] (II) Loading sub module "shadow"
[ 25.012] (II) LoadModule: "shadow"
[ 25.012] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 25.022] (II) Module shadow: vendor="X.Org Foundation"
[ 25.022] compiled for 1.15.1, module version = 1.1.0
[ 25.023] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.023] (--) Depth 24 pixmap format is 32 bpp
[ 25.033] (==) modesetting(G0): Backing store enabled
[ 25.033] (==) modesetting(G0): Silken mouse enabled
[ 25.033] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 25.034] (==) modesetting(G0): DPMS enabled
[ 25.334] (II) NVIDIA: Using 1024.00 MB of virtual memory for indirect memory
[ 25.334] (II) NVIDIA: access.
[ 25.553] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 25.627] Loading extension NV-GLX
[ 25.723] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 25.723] (==) NVIDIA(0): Backing store enabled
[ 25.723] (==) NVIDIA(0): Silken mouse enabled
[ 25.724] (==) NVIDIA(0): DPMS enabled
[ 25.724] Loading extension NV-CONTROL
[ 25.724] Loading extension XINERAMA
[ 25.724] (II) Loading sub module "dri2"
[ 25.724] (II) LoadModule: "dri2"
[ 25.724] (II) Module "dri2" already built-in
[ 25.724] (II) NVIDIA(0): [DRI2] Setup complete
[ 25.724] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 25.725] (--) RandR disabled
[ 25.756] (II) Initializing extension GLX
[ 25.760] (II) modesetting(G0): Damage tracking initialized
[ 26.052] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 26.052] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 26.052] (II) LoadModule: "evdev"
[ 26.078] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 26.081] (II) Module evdev: vendor="X.Org Foundation"
[ 26.081] compiled for 1.15.0, module version = 2.8.2
[ 26.081] Module class: X.Org XInput Driver
[ 26.081] ABI class: X.Org XInput driver, version 20.0
[ 26.081] (II) Using input driver 'evdev' for 'Power Button'
[ 26.081] (**) Power Button: always reports core events
[ 26.081] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 26.081] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 26.081] (--) evdev: Power Button: Found keys
[ 26.081] (II) evdev: Power Button: Configuring as keyboard
[ 26.081] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 26.081] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 26.081] (**) Option "xkb_rules" "evdev"
[ 26.081] (**) Option "xkb_model" "pc104"
[ 26.081] (**) Option "xkb_layout" "us"
[ 26.136] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 26.136] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 26.136] (II) Using input driver 'evdev' for 'Video Bus'
[ 26.136] (**) Video Bus: always reports core events
[ 26.136] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 26.136] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 26.136] (--) evdev: Video Bus: Found keys
[ 26.136] (II) evdev: Video Bus: Configuring as keyboard
[ 26.136] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
[ 26.136] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 26.136] (**) Option "xkb_rules" "evdev"
[ 26.136] (**) Option "xkb_model" "pc104"
[ 26.136] (**) Option "xkb_layout" "us"
[ 26.137] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 26.137] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 26.137] (II) Using input driver 'evdev' for 'Power Button'
[ 26.137] (**) Power Button: always reports core events
[ 26.137] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 26.138] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 26.138] (--) evdev: Power Button: Found keys
[ 26.138] (II) evdev: Power Button: Configuring as keyboard
[ 26.138] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2/event1"
[ 26.138] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 26.138] (**) Option "xkb_rules" "evdev"
[ 26.138] (**) Option "xkb_model" "pc104"
[ 26.138] (**) Option "xkb_layout" "us"
[ 26.139] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 26.139] (II) No input driver specified, ignoring this device.
[ 26.139] (II) This device may have been added with another device file.
[ 26.139] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 26.139] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 26.139] (II) Using input driver 'evdev' for 'Sleep Button'
[ 26.140] (**) Sleep Button: always reports core events
[ 26.140] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 26.140] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 26.140] (--) evdev: Sleep Button: Found keys
[ 26.140] (II) evdev: Sleep Button: Configuring as keyboard
[ 26.140] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input4/event3"
[ 26.140] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 26.140] (**) Option "xkb_rules" "evdev"
[ 26.140] (**) Option "xkb_model" "pc104"
[ 26.140] (**) Option "xkb_layout" "us"
[ 26.141] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 26.141] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 26.141] (II) Using input driver 'evdev' for 'Video Bus'
[ 26.141] (**) Video Bus: always reports core events
[ 26.141] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 26.141] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 26.141] (--) evdev: Video Bus: Found keys
[ 26.141] (II) evdev: Video Bus: Configuring as keyboard
[ 26.141] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:01/input/input16/event14"
[ 26.141] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
[ 26.141] (**) Option "xkb_rules" "evdev"
[ 26.141] (**) Option "xkb_model" "pc104"
[ 26.141] (**) Option "xkb_layout" "us"
[ 26.142] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 26.142] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 26.143] (II) config/udev: Adding input device 1.3M HD WebCam (/dev/input/event8)
[ 26.143] (**) 1.3M HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 26.143] (II) Using input driver 'evdev' for '1.3M HD WebCam'
[ 26.143] (**) 1.3M HD WebCam: always reports core events
[ 26.143] (**) evdev: 1.3M HD WebCam: Device: "/dev/input/event8"
[ 26.143] (--) evdev: 1.3M HD WebCam: Vendor 0x58f Product 0xb002
[ 26.143] (--) evdev: 1.3M HD WebCam: Found keys
[ 26.143] (II) evdev: 1.3M HD WebCam: Configuring as keyboard
[ 26.143] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event8"
[ 26.143] (II) XINPUT: Adding extended input device "1.3M HD WebCam" (type: KEYBOARD, id 11)
[ 26.143] (**) Option "xkb_rules" "evdev"
[ 26.143] (**) Option "xkb_model" "pc104"
[ 26.143] (**) Option "xkb_layout" "us"
[ 26.144] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 26.144] (II) No input driver specified, ignoring this device.
[ 26.144] (II) This device may have been added with another device file.
[ 26.145] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[ 26.145] (II) No input driver specified, ignoring this device.
[ 26.145] (II) This device may have been added with another device file.
[ 26.145] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 26.145] (II) No input driver specified, ignoring this device.
[ 26.146] (II) This device may have been added with another device file.
[ 26.146] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 26.146] (II) No input driver specified, ignoring this device.
[ 26.146] (II) This device may have been added with another device file.
[ 26.147] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 26.147] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 26.147] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 26.147] (**) AT Translated Set 2 keyboard: always reports core events
[ 26.147] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 26.147] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 26.147] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 26.147] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 26.147] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 26.147] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 26.147] (**) Option "xkb_rules" "evdev"
[ 26.147] (**) Option "xkb_model" "pc104"
[ 26.147] (**) Option "xkb_layout" "us"
[ 26.148] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[ 26.148] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 26.148] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 26.148] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 26.148] (II) LoadModule: "synaptics"
[ 26.148] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 26.158] (II) Module synaptics: vendor="X.Org Foundation"
[ 26.158] compiled for 1.15.0, module version = 1.7.4
[ 26.158] Module class: X.Org XInput Driver
[ 26.158] ABI class: X.Org XInput driver, version 20.0
[ 26.158] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 26.158] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 26.158] (**) Option "Device" "/dev/input/event15"
[ 26.316] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5774 (res 56)
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5022 (res 105)
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 26.317] (**) Option "TapButton1" "1"
[ 26.317] (**) Option "TapButton2" "2"
[ 26.317] (**) Option "TapButton3" "3"
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 26.317] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 26.370] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event15"
[ 26.370] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 26.370] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 26.370] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 26.370] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[ 26.370] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 26.370] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 26.371] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 26.371] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 26.371] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 26.371] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 26.371] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 26.372] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 26.372] (II) No input driver specified, ignoring this device.
[ 26.372] (II) This device may have been added with another device file.
[ 26.373] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event6)
[ 26.373] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 26.373] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 26.373] (**) Acer WMI hotkeys: always reports core events
[ 26.373] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event6"
[ 26.373] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 26.373] (--) evdev: Acer WMI hotkeys: Found keys
[ 26.373] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 26.373] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event6"
[ 26.373] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 14)
[ 26.373] (**) Option "xkb_rules" "evdev"
[ 26.373] (**) Option "xkb_model" "pc104"
[ 26.373] (**) Option "xkb_layout" "us"
[ 26.374] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event7)
[ 26.374] (II) No input driver specified, ignoring this device.
[ 26.374] (II) This device may have been added with another device file.
[ 26.375] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 26.375] (II) No input driver specified, ignoring this device.
[ 26.375] (II) This device may have been added with another device file.
[ 26.489] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 26.507] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 26.573] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 27.186] (II) evdev: Acer WMI hotkeys: Close
[ 27.186] (II) UnloadModule: "evdev"
[ 27.187] (II) UnloadModule: "synaptics"
[ 27.187] (II) evdev: AT Translated Set 2 keyboard: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.187] (II) evdev: 1.3M HD WebCam: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.187] (II) evdev: Video Bus: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.187] (II) evdev: Sleep Button: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.187] (II) evdev: Power Button: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.187] (II) evdev: Video Bus: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.187] (II) evdev: Power Button: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.254] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 27.404] (EE) Server terminated successfully (0). Closing log file.
It is still not working.
Last edited by hozturk0327 (2014-04-28 14:08:41) -
[Bumblebee]Failed to initialize the NVIDIA GPU at PCI:1:0:0.
Hi!
I've instaled Arch about a month ago and now wanted to check my nvidia card using Bumblebee, but have some errors…
[wicu@arch:~]$ optirun -vv minecraft
[ 4859.259278] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 4859.404191] [DEBUG]optirun version 3.0.1 starting...
[ 4859.404220] [DEBUG]Active configuration:
[ 4859.404226] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 4859.404242] [DEBUG] X display: :8
[ 4859.404254] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-bumblebee:/usr/lib32/nvidia-bumblebee
[ 4859.404265] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 4859.404276] [DEBUG] VGL Compression: proxy
[ 4859.536971] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 4859.537027] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 4859.537053] [DEBUG]Socket closed.
[ 4859.537086] [ERROR]Aborting because fallback start is disabled.
[ 4859.537094] [DEBUG]Killing all remaining processes.
[wicu@arch:~]$ sudo journalctl // here is only part when I tried use bumblebee
Nov 26 17:48:43 arch kernel: NVRM: failed to copy vbios to system memory.
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238670] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238729] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238765] [WARN][XORG] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238819] [ERROR][XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238826] [ERROR][XORG] (EE) NVIDIA(0): check your system's kernel log for additional error
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238830] [ERROR][XORG] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238835] [ERROR][XORG] (EE) NVIDIA(0): README for additional information.
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238841] [ERROR][XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238847] [ERROR][XORG] (EE) NVIDIA(0): Failing initialization of X screen 0
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238853] [ERROR][XORG] (EE) Screen(s) found, but none have a usable configuration.
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238858] [ERROR][XORG] (EE)
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238863] [ERROR][XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238868] [ERROR][XORG] (EE)
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238873] [ERROR]X did not start properly
Nov 26 17:48:43 arch kernel: NVRM: RmInitAdapter failed! (0x30:0xffffffff:739)
Nov 26 17:48:43 arch kernel: NVRM: rm_init_adapter(0) failed
// xorg log
[ 4859.510]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 4859.511] X Protocol Version 11, Revision 0
[ 4859.511] Build Operating System: Linux 3.6.3-1-ARCH x86_64
[ 4859.511] Current Operating System: Linux arch 3.6.7-1-ARCH #1 SMP PREEMPT Sun Nov 18 10:11:22 CET 2012 x86_64
[ 4859.511] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70a6cff9-bcf7-42eb-9ba1-73953e023617 ro quiet
[ 4859.511] Build Date: 08 November 2012 07:09:29PM
[ 4859.511]
[ 4859.511] Current version of pixman: 0.28.0
[ 4859.511] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4859.511] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4859.511] (==) Log file: "/var/log/Xorg.8.log", Time: Mon Nov 26 18:00:43 2012
[ 4859.511] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 4859.511] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4859.511] (==) ServerLayout "Layout0"
[ 4859.512] (==) No screen section available. Using defaults.
[ 4859.512] (**) |-->Screen "Default Screen Section" (0)
[ 4859.512] (**) | |-->Monitor "<default monitor>"
[ 4859.512] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 4859.512] (**) | |-->Device "Device1"
[ 4859.512] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4859.512] (**) Option "AutoAddDevices" "false"
[ 4859.512] (**) Not automatically adding devices
[ 4859.512] (==) Automatically enabling devices
[ 4859.512] (==) Automatically adding GPU devices
[ 4859.512] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4859.512] Entry deleted from font path.
[ 4859.512] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4859.512] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4859.512] Entry deleted from font path.
[ 4859.512] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4859.512] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 4859.512] (++) ModulePath set to "/usr/lib/nvidia-bumblebee/xorg/,/usr/lib/xorg/modules"
[ 4859.512] (==) |-->Input Device "<default pointer>"
[ 4859.512] (==) |-->Input Device "<default keyboard>"
[ 4859.512] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 4859.512] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 4859.512] (II) Loader magic: 0x7fcc40
[ 4859.512] (II) Module ABI versions:
[ 4859.512] X.Org ANSI C Emulation: 0.4
[ 4859.513] X.Org Video Driver: 13.1
[ 4859.513] X.Org XInput driver : 18.0
[ 4859.513] X.Org Server Extension : 7.0
[ 4859.513] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4859.513] setversion 1.4 failed
[ 4859.516] (--) PCI:*(0:1:0:0) 10de:0de9:17aa:3901 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 4859.516] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4859.516] Initializing built-in extension Generic Event Extension
[ 4859.516] Initializing built-in extension SHAPE
[ 4859.516] Initializing built-in extension MIT-SHM
[ 4859.516] Initializing built-in extension XInputExtension
[ 4859.516] Initializing built-in extension XTEST
[ 4859.516] Initializing built-in extension BIG-REQUESTS
[ 4859.516] Initializing built-in extension SYNC
[ 4859.516] Initializing built-in extension XKEYBOARD
[ 4859.516] Initializing built-in extension XC-MISC
[ 4859.516] Initializing built-in extension SECURITY
[ 4859.516] Initializing built-in extension XINERAMA
[ 4859.516] Initializing built-in extension XFIXES
[ 4859.516] Initializing built-in extension RENDER
[ 4859.516] Initializing built-in extension RANDR
[ 4859.516] Initializing built-in extension COMPOSITE
[ 4859.516] Initializing built-in extension DAMAGE
[ 4859.516] Initializing built-in extension MIT-SCREEN-SAVER
[ 4859.516] Initializing built-in extension DOUBLE-BUFFER
[ 4859.516] Initializing built-in extension RECORD
[ 4859.516] Initializing built-in extension DPMS
[ 4859.516] Initializing built-in extension X-Resource
[ 4859.516] Initializing built-in extension XVideo
[ 4859.516] Initializing built-in extension XVideo-MotionCompensation
[ 4859.516] Initializing built-in extension XFree86-VidModeExtension
[ 4859.516] Initializing built-in extension XFree86-DGA
[ 4859.516] Initializing built-in extension XFree86-DRI
[ 4859.516] Initializing built-in extension DRI2
[ 4859.516] (II) LoadModule: "glx"
[ 4859.516] (II) Loading /usr/lib/nvidia-bumblebee/xorg/modules/extensions/libglx.so
[ 4859.526] (II) Module glx: vendor="NVIDIA Corporation"
[ 4859.526] compiled for 4.0.2, module version = 1.0.0
[ 4859.526] Module class: X.Org Server Extension
[ 4859.526] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012
[ 4859.526] Loading extension GLX
[ 4859.526] (II) LoadModule: "nvidia"
[ 4859.526] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4859.526] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4859.526] compiled for 4.0.2, module version = 1.0.0
[ 4859.526] Module class: X.Org Video Driver
[ 4859.526] (II) LoadModule: "mouse"
[ 4859.527] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 4859.527] (II) Module mouse: vendor="X.Org Foundation"
[ 4859.527] compiled for 1.13.0, module version = 1.8.1
[ 4859.527] Module class: X.Org XInput Driver
[ 4859.527] ABI class: X.Org XInput driver, version 18.0
[ 4859.527] (II) LoadModule: "kbd"
[ 4859.527] (WW) Warning, couldn't open module kbd
[ 4859.527] (II) UnloadModule: "kbd"
[ 4859.527] (II) Unloading kbd
[ 4859.527] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 4859.527] (II) NVIDIA dlloader X Driver 310.19 Thu Nov 8 00:53:33 PST 2012
[ 4859.527] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4859.527] (--) using VT number 7
[ 4859.527] (II) Loading sub module "wfb"
[ 4859.527] (II) LoadModule: "wfb"
[ 4859.527] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4859.527] (II) Module wfb: vendor="X.Org Foundation"
[ 4859.527] compiled for 1.13.0, module version = 1.0.0
[ 4859.527] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4859.527] (II) Loading sub module "ramdac"
[ 4859.527] (II) LoadModule: "ramdac"
[ 4859.527] (II) Module "ramdac" already built-in
[ 4859.527] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4859.527] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4859.527] (==) NVIDIA(0): RGB weight 888
[ 4859.527] (==) NVIDIA(0): Default visual is TrueColor
[ 4859.527] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4859.527] (**) NVIDIA(0): Option "NoLogo" "true"
[ 4859.528] (**) NVIDIA(0): Option "UseEDID" "false"
[ 4859.528] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP"
[ 4859.528] (**) NVIDIA(0): Enabling 2D acceleration
[ 4859.528] (**) NVIDIA(0): ConnectedMonitor string: "DFP"
[ 4859.528] (**) NVIDIA(0): Ignoring EDIDs
[ 4859.534] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 4859.534] (EE) NVIDIA(0): check your system's kernel log for additional error
[ 4859.534] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
[ 4859.534] (EE) NVIDIA(0): README for additional information.
[ 4859.534] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[ 4859.534] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 4859.534] (II) UnloadModule: "nvidia"
[ 4859.534] (II) UnloadSubModule: "wfb"
[ 4859.534] (EE) Screen(s) found, but none have a usable configuration.
[ 4859.534]
Fatal server error:
[ 4859.534] no screens found
[ 4859.534] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 4859.534] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 4859.534] (EE)
[ 4859.534] Server terminated with error (1). Closing log file.
[wicu@arch:~]$ lspci | grep VGA
3:00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
14:01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630M] (rev a1)
[wicu@arch:~]$ primusrun minecraft
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
asdf
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
27 achievements
208 recipes
Setting user: Druedain, -4246576297828159265
primus: fatal: failure contacting bumblebee daemon
[18:05:39 - wicu@arch:~]$ primusrun minecraft
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
asdf
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
27 achievements
208 recipes
Setting user: Druedain, -7896572405277476304
primus: fatal: failure contacting bumblebee daemon
[wicu@arch:~]$ systemctl | grep bumblebee
35:bumblebeed.service[wicu@arch:~]$ dmesg | grep nvidia
782:[ 6.776816] nvidia: module license 'NVIDIA' taints kernel.
784:[ 6.784411] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[wicu@arch:~]$ cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
## Client options. Will take effect on the next optirun executed.
[optirun]
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
Module=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-bumblebee:/usr/lib32/nvidia-bumblebee
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-bumblebee/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
[wicu@arch:~]$ cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "ConnectedMonitor" "DFP"
EndSection -
I bought in december of 2008 a 2.4ghz macbook pro and I think the gpu is starting to fail. Can I still be covered for a change because of the faulty nvidia gpu?
If your computer qualifies - MacBook Pro: Distorted video or no video issues
If it does, call Apple Customer Relations or print out a copy of the article and bring it in to the repair shop. -
Qosmio X870-116: usage of Intel / nVidia GPU on internal / external display
Hello,
I have a Qosmio X870-116 which have 2 video cards, a Intel on board and a Nvidia more powerfull.
My probleme, I don't how I switch my display on the Intel card and I see my Nvidia only for the external display.
Some one have an idea to switch on the nvidia card to my first display?
ThanksHi
Something like that isnt possible.
You cannot use two graphic cards simultaneously for internal and external display.
First of all you can switch between external and internal display using the function key Fn + F4 (or just F4)
Secondly the nVidia Optimus technology optimize notebook performance by seamlessly switching between a nVidia GPU and Intel internal graphic card.
The switching is automatic and does not require any notebooks reboot. -
I have a laptop with an Nvidia card (335GT) with optimus support, when I run firefox with the Nvidia GPU the buttons flicker around, sometimes they disappear. the menus doesn't show, some text in the screen doesn't show, etc.
at first I trough it was an extension so I disabled every extension but no luck.
Once I noticed that Firefox was using the nvidia gpu I trough on forcing it to use the integrated card (intel HD) to save battery, to my surprise the problem corrected once I did it.Disable:<br />
Tools > Options > Advanced : General: Browsing: [ ] "Use hardware acceleration when available"
You can also set the pref gfx.direct2d.disabled to false via a file user.js<br />
user_pref("gfx.direct2d.disabled", true);
See http://kb.mozillazine.org/user.js_file
More related prefs:
layers.accelerate-all
layers.accelerate-none -
T430s Nvidia GPU not being utilized
I noticed that when looking at my nvidia gpu tray icon, it is almost never being used.
On a T410s I had a while back, I had the ability to choose to turn it on and off based on power schemes.
1) Is there any value to keep my discrete GPU on and have it run all visual events?
2) If yes, how can I do this?
i7-3520; 16GB Ram; msata - 256 gbYou should also be able to right-click and there should be a "run with graphics processor" option that will allow you to select the nVidia card.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3. -
I am suffering the overheating issue in my HP Pavilion DV2000 laptop caused by NVIDIA GPU issue. When I go to the settlement site http://www.nvidiasettlement.com , I see that the last date of filing the claim expired which was 14th of March 2011. Is there any option remaining for the solution.
I want to get rid of this irritating overheating problem. Is there any option for replacement of NVIDIA GPU at my own cost even in some authorised service centre?
Regards,
Sujeet
[email protected]
+919266580154Thank you for confirming, that this can in some cases solve the overheating.
And i agree with you, that it is not straight forward, and people has to be carefull -
Re: Lenovo U410 - nVidia GPU, 5.1 sound configuration
Hi i have these questions.
1. Is possible to change nvidia gpu on this laptop model ?
2. Can i connect 5.1 speakers to this laptop because in my windows 8 speakers configuration i have only stereo output option. If yes how.
Thanks
Lenovo IdeaPad U410, Core i7 - 3517U, 8GB RAM 1600 MHz, 1 TB + 24GB SSD HDD, BIOS: 65CN15WW
Windows 7 Home Premium -> Windows 8 Pro RTM (upgraded without problems)Hello there!
In the german forum, I found some more help.
This configuration now got 5.1 sound mixing to work via ALSA (without using PulseAudio).
$ cat /etc/modprobe.d/alsa-base.conf
options snd_hda_intel index=-2
options snd_usb_audio index=-1
$ cat /etc/asound.conf
pcm.!default
type plug
slave.pcm "surround51"
slave.channels 6
route_policy duplicate
$ cat /proc/asound/cards
0 [Device ]: USB-Audio - USB Sound Device
USB Sound Device at usb-0000:00:1a.7-5.4, full speed
1 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfc620000 irq 47
4 [ThinkPadEC ]: ThinkPad EC - ThinkPad Console Audio Control
ThinkPad Console Audio Control at EC reg 0x30, fw 7VHT12WW-1.01
But this doesn't solve all my problems.
I'm still searching for a way of how to use the internal intel sound card as default PCM device if the USB sound is unplugged or not available during boot.
Any ideas? -
T61, Nvidia 140m windows 8.1 64bit driver
Recognizing that Windows 8.1 is not officially supported, does anyone have a recommendation for a T61 Nvidia driver version in Win 8.1 64bit ? I had moved away from the Windows-provided driver initially before discovering that the problem was something else (wireless adapter). Recent drivers from Nvidia seem to work most of the time.
T61 WSXGA+ T9300 NVS140m 8GB SSD Win8.1pro 64bit
T61 SXGA+ T9300 NVS140m 4GB SSD Win8.1pro 64bit
Solved!
Go to Solution.Just use the latest nVidia ones, they work perfectly.
QUADRO NOTEBOOK DRIVER RELEASE 331
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB -
What is the best nvidia GPU, besides the Quadro, that you can put in a new mac pro? And by that I mean off the shelf, it just works? I can't tell by looking at the nvidia site. Thanks.
Better than not, but the drivers do not live up to the card's full potential compared to same card but running Windows 7 64-bit.
Though the GeForce GTX 285 was dominating in our extreme 3D tests,
it produced mixed results in the Core Image tests above.
http://www.barefeats.com/nehal12.html
http://www.barefeats.com/opencl.html
And then there was the infamous 10.6.4 bug.
https://discussions.apple.com/thread/2466778?start=0&tstart=0
http://forums.nvidia.com/index.php?showtopic=98966
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/6
It felt like Apple released the card, and did not and was not ready with drivers. Heck, saw similar poor results with 10.5.2 and 8800GT that gradually improved - until the card was EOL but the performance was starting to look okay in 10.5.8 of all things.
besides the GTX 285 price, that it is only on ebay now, when there are GTX 580s that would make a better replacement, if of course Nvidia GTXs were an option and kept current.
Maybe you are looking for
-
Is it possilbe to install Windows 7 in an external drive using Boot Camp
Hi, Is it possilbe to install Windows 7 in an external drive using Boot Camp? If yes, can you someone show me or direct me where I can find more info? Thanks a lot
-
Screen Goes Dark During iPhone Sync
This sounds strange and I can't seem to find a logical explanation for this. I noticed that I went I plug my iPhone via USB for iTunes to automatically synch, within seconds the screen goes dark. What I have been doing lately is to rest the phone o
-
How do I get numbers to automatically add the next date down a column in numbers?
How do I get numbers to automatically add the next date down a column in numbers?
-
Scenario: File - XI - Sync RFC Source File has say comp code and I want to call std RFC BAPI_COMPANY_GETDETAIL to retrieve the details. What should be my outbound and inbound message interfaces be ? I know inbound will be the RFC imported from SAP, b
-
Switch to previous view in way
upgraded to firefox 19 on android and I came a cross an issue, the button to go into multitask mode (makes the app take up half the screen) is in the bottom riht corner, it blocks part of everypage and it covers the keyboard, my question is, can I re