Tab controling Tab

My goal is following
When i press the A tab on the test tab control, the B tab shall disepear in test tab control and only the A tab should be visible in test2 tab control( not greyed out) . The same thing shall happen when B are pressed, that wil say only will be visible.
In other word , i want to use one tab control to control another tabcontrols visible tabs
Solved!
Go to Solution.
Attachments:
Tabcontrol.vi ‏6 KB

You can create a property node of a tab control to give you references to all of the pages (a 1-D array). From there, you can create a property node on a particular reference and set the visibility of that page.
Attachments:
Tabcontrol[1]_BD.png ‏13 KB

Similar Messages

Lock Tab Control Tabs Position

Hello. I have a tab control with multiple rows of tabs. When the VI is run, when you click on a tab that it is not in the bottom row, it will shuffle that row to the bottom. Does anyone know of a way to prevent this shuffle from occuring and lock the tabs in a certain position?

I agree that that can be annoying. Because the tab is connected to the tabpage, the one selected has to move to the front. If if stayed in the top row, then you could not see or click the bottom row.
One alternative is to hide the tabs, change the tab control to an indicator, and create a customized radio button control which looks like the tabs.
Lynn
Attachments:
tab control alternative.vi ‏14 KB

Tab control bugzilla

Need some help
Why doesnt the tab nr 6 disipear when i go from page 2 to 3 but it does the other way back.
Solved!
Go to Solution.
Attachments:
visibletabcontrolpage_lv82.vi ‏31 KB

Continue in your original thread. http://forums.ni.com/t5/LabVIEW/Tab-controling-Tab/td-p/1971875

Save the selected value from listbox with its respective tab control dropdown selcted values in another listbox

Hi all,
I am making a vi where I have to save the selected value from listbox with its respective tab control dropdown selcted values in another listbox.Whenever I select Item1 then the heading change and respective tab will open for that item.But Now I just want to save the selection and put it in another ListBox.SO that I can renmove or add according to my wish. Plz help me.
Solved!
Go to Solution.
Attachments:
my_vi.png ‏83 KB

Hi, I successfully make the vi to insert itmes from listbox1 to listbox2.Whenever I select itmes 1 in listbox 1 it display same elected item in listbox2 , but it not appending the items in listbox2.Like If 1 is selected in listbox1 then 1 will display , next time after saving when I selct next item like 3 then in listbox 2, 1 is replaced by 3,it dont come in second row of listbox2.Hope I am able to explain.\
Plz help me to resolve this.
Attachments:
listbox_update.vi ‏11 KB

How to change Switch between open documents keyboard shortcut (default Control + Tab or Cmd + ~)

I use Control + Tab and Control + Shift + Tab or Cmd + ~ and Cmd + Shift + ~ to switch between tab back and forth alot how do I change the shortcut to something else?
On Photoshop CC 2014 mac

No, there isn't. you can't even set your own shor cut keys as you don't know what the documents will be named. Normally you can add short cuts keys but only for those menus options that already exist but your documents will change. I have searched for the answer earlier as I also want it.
There is in the Pages Help menu an option for Keyboard shorcuts but nothing is mentioned ther about changing document windows.

How can I set the tab order of text box controls on each page of a tab control?

I need to be able to select the tabbing order of individual controls on a single page of a tabbed control. How??

In LV 6.1 an up you should be ablel to right click on the edge of the tab control when the tab-page in question is selected.
The bttom selcetion in the pop-up is "Reoder controls in page..."
selecting this option will switch editing modes to allow you to specify the ored, just like in a cluster.
I seem to remeber in older versions you had to drag the tabable controls off the tab control, specify the tabbing oder and then drag them back on. The oldest version I have on this machine is 6.1 so that all I can speak for at the moment.
I hope this helps,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can one increase or zoom the size of the menu bar tabs/control items? They are tiny at HD resolution.

i have a large monitor and i have it set to high res. This makes everything small. I bring it up with no squint but this does not work on the upper menu/tool bar/control/tabs or their drop down menus, leaving me squinting again. There needs to be a no squint feature for this area of the browser

'''''NoSquint''''' changes only the web page display, not the Firefox user interface.
Try this Add-on:
*'''''Theme Font and Size Changer''''' -->https://addons.mozilla.org/en-US/firefox/addon/theme-font-size-changer/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Can you print all the tab control's contents and include the tabs?

We are trying to generate a report that includes the contents of a tab control (graphs, text). Using the Append Control Image to Report.vi, we are only able to print out the active tab and the tab is cut off of the image. How can we generate reports that include all the tab pages and their contents and include the labeling tabs?
Thanks in advance.
Jim

I do have a workaround for makinging the prints but it looks like some sort of cropped screensave that cuts off the tabs. In my sample I was printing out 3 of the tab controls and you can see there are three by the cut off tabs. Is there a setting to allow for more of the graph and its surroundings to be "captured"?
Attachments:
Document.pdf ‏53 KB
Document (2).pdf ‏51 KB
Document (3) (2).pdf ‏58 KB

How can I Create a exe file were a tab control on it work`s

I have a VI with many controls and indicators,these are spread on a tab control.This tab control works with out any problems but if i create a exe file then the tab control is fixed. How can I create a exe file so that the tab control on it work´s ?"
Attachments:
project7.1.jpg ‏129 KB

Make the tab control a control and not an indicator. If you want to write
to it you need to create a local variable.
"Carlos-R." wrote in message
news:[email protected]..
I have a VI with many controls and indicators,these are spread on a
tab control.This tab control works with out any problems but if i
create a exe file then the tab control is fixed. How can I create a
exe file so that the tab control on it work´s ?"

How can I create a exe file with a tab control on it that work´s ?

I have a VI with many controls and indicators,these are spread on a tab control.This tab control works with out any problems but if i create a exe file then the tab control is fixed. How can I create a exe file so that the tab control on it work´s ?

I have made a new Posting with the same question but this time I added a screenshot of the VI.
Attachments:
project7.1.jpg ‏129 KB

Data Origin Types not filled in the tab "Control Data" of BP interface

Hello experts,
I have loaded the clients from ECC6.0 to CRM 4.0.
Before I have loaded the clients I have maintained the data origin type for the BP in spro -> cross application components -> SAP Business Partner -> Business partner -> Basic settings -> Data Origin -> Maintain Data Origin Type.
After I have done the load initial of clients, the field "Data Origin" is empty in the tab "Control Data" in BP interface. If I do F4 in the field appear the configuration that I did in spro appear.
For this field will appear filled I'll need to do more configurations in spro?
Best regards,
Mary

Hi Mary,
The middleware does not fill this field in BP master data. You can maintain data origin type in SPRO, however the mBdoc does not use this customizing in order to fill this field.
Please try to use the BADI CRM_DATAEXCHG_BADI in order to fill this field during master data download.
It hope it helps.
Regards,
Gabriel Santana

Horizontal tabs when they are on the left side of tab control

I have a tab control for a touch screen where I was going to use buttons along the left side to change tabs, and hide the tabs. However, I realized I can put the tabs on the left side of the tab control and remove my buttons all together. Only issue is, I would like them (along with their font) to be horizontal, not vertical as they are shown in my screenshot. Is there a way to change this?
CLA, LabVIEW Versions 2010-2013
Solved!
Go to Solution.
Attachments:
touchscreen.PNG ‏118 KB

It's a really poor design aspect of tab controls that the text is sideways when the tabs are on the left or right side.
I've looked into it and found no way to re-orient the text.
However you can put images on the tabs instead of text, and the images can be of text (correctly oriented of course).
The attached code can be used to generate such a tab control.
Attachments:
Create_Good_Tab_2.llb ‏98 KB

How to hide a tab in a Tab Control by Property Node?

Hi,
I have a Tab Control in my Front Panel. So, using a array of LEDs, I would like to hide some tabs, probably using Property Node functions, but I can't find what option do it. Is it possible?

Thanks Macro! I came to the forum to find a solution for this exact problem, it's nice to find it already laid out for me so clearly.
-Joe

Using a jQuery list box placed onto a tab control doesn't seem to work for posting?

Hello,
I developed a U.I. in Dreamweaver for a product and have several list boxes that use the onChange modifier to collect what the user selects from the list. I use the onChange=this.form.submit() function to grab the user's selection from the list box..
When this dropdown list box code is placed onto a form, it posts properly and I can retrieve the user's list selection. If however I place the list box code onto a Tab page from a jQuery Tab Control, developed in Dreamweaver, the posting doesn't seem to work.
I must be missing something because identical code is working fine when the list box code is placed on a form yet when the code is repeated from within a Tab, it isn't working.
The code is simple, and shown below). The list values are coming from a MySQL table.
$MyQuantity_query="SELECT * FROM Quantity_Table";
$MyQuantity_Result=mysqli_query($cxn,$MyQuantity_query) or Die ("Cannot connect");
echo"<select name='ThisQuantity[$RowCounter]' value='ThisQuantity[$Rowcounter]' onChange='this.form.submit()'><option value='-1' selected>Qty</option>";
While($MyQuantity_Row=mysqli_fetch_assoc($MyQuantity_Result))
extract($MyQuantity_Row);
echo"<option value='$Qty_Number'>$Qty_Number</option>";
echo"</select>";
Any suggestions would be appreciated. Thanks.
Joel
[email protected]

Thanks you.
I tried placing the selection list inside of
tags but posting still doesn’t seem to be working?
Regards,
Joel

Purchase order Condition control tab?

Hi,
Here in the purchase order condition control tab I need to get Price Date and Price date category. Presently they are not appearing in my purchase orders. When I go to screen layout, I am not able to get those fields to configure.
Could please anybody help me urgently?
Thanks,
Bhairav

Hi
GOTO----> OLME--> PO -> Define Screenlay out at Document level -> There Choose your Field Selection ( NBF and ME21N)... and go into to details--> And select the field selection group Quantity and Price and Double Click--> There you choose the field <b>PRICING DATE CONTROL</b> and Check it as a Required Entry or Optional Entry and save . <b>DO IT FOR BOTH NBF and ME21N FIELD SELECTION.</b>
Now when ever you make PO in ME21N.....You will get Pricing Date Category and Price Date Fields in PO-> Item Details---> Condition Control Tab.
Reward if useful
Regards
S.Baskaran
Message was edited by:
baskaran srinivasan

Tab controling Tab

Similar Messages

Maybe you are looking for