Tab getting overwritten in excise invoice tab in migo
Hello all,
i have a doubt , i have added a custom tab at header level in migo but that tab is getting overlaped when excise tab is coming ie that tab is getting overlapped under excise invoice tab.
please help me necessary solution if possible please provide me sample code.
Regards
Abhinav
Hello
Refer to below Code.
METHOD IF_EX_MB_MIGO_BADI~PBO_HEADER.
CHECK I_CLASS_ID = GF_CLASS_ID.
IF MIGO_HTAB = 'GR'.
IF G_NO_INPUT IS INITIAL.
E_CPROG = 'SAPLZMIGBADI'.
E_DYNNR = '9000'. "External fields: Input
E_HEADING = 'EXTRA GR'(001).
ELSE.
E_CPROG = 'SAPLZMIGBADI'.
E_DYNNR = '9000'. "External fields: Input
E_HEADING = 'EXTRA GR'(001).
ENDIF.
ENDIF.
IF MIGO_HTAB = 'GI'.
IF G_NO_INPUT IS INITIAL.
E_CPROG = 'SAPLZGDRCV'.
E_DYNNR = '9000'. "External fields: Input
E_HEADING = 'EXTRA GI'(002).
ELSE.
E_CPROG = 'SAPLZGDRCV'.
E_DYNNR = '9000'. "External fields: Input
E_HEADING = 'EXTRA GI'(002).
ENDIF.
ENDIF.
IF MIGO_HTAB = 'GR'.
CALL FUNCTION 'ZMIGO_BADI_PUT_HEADER'
EXPORTING
IS_MIGO_BADI_HEADER_FIELDS = GS_EXDATA_HEADER.
ENDIF.
IF MIGO_HTAB = 'GI'.
CALL FUNCTION 'ZMIGO_BADI_PUT_HEADER_GI'
EXPORTING
IS_MIGO_BADI_HEADER_FIELDS = GS_EXDATA_HEADER.
ENDIF.
ENDMETHOD.
Abhinav Singh
Similar Messages
-
New Tab is replacing the Excise Invoice tab on MIGO Header
Hi All,
I have Added new tab in MIGO Header,it is working fine, if i am doing MIGO for Excisable PO , then Excise Details tab is not appearing In my MIGO header (New Tab is replacing the Excise Detils Tab) and at my item level Exise item tab is dispaying.
I have Used BADI : MB_MIGO_BADI
At PBO_HEADER,
data: gf_class_id type migo_class_id.
gf_class_id = 'MIGO_BADI_IMPLEMENTATION_CIN'.
E_CPROG = 'ZMIGO_VENDTAB'.
E_DYNNR = '0001'.
E_HEADING = 'Vendor Details'.
Please help me.Hello
Refer to below Code.
METHOD IF_EX_MB_MIGO_BADI~PBO_HEADER.
CHECK I_CLASS_ID = GF_CLASS_ID.
IF MIGO_HTAB = 'GR'.
IF G_NO_INPUT IS INITIAL.
E_CPROG = 'SAPLZMIGBADI'.
E_DYNNR = '9000'. "External fields: Input
E_HEADING = 'EXTRA GR'(001).
ELSE.
E_CPROG = 'SAPLZMIGBADI'.
E_DYNNR = '9000'. "External fields: Input
E_HEADING = 'EXTRA GR'(001).
ENDIF.
ENDIF.
IF MIGO_HTAB = 'GI'.
IF G_NO_INPUT IS INITIAL.
E_CPROG = 'SAPLZGDRCV'.
E_DYNNR = '9000'. "External fields: Input
E_HEADING = 'EXTRA GI'(002).
ELSE.
E_CPROG = 'SAPLZGDRCV'.
E_DYNNR = '9000'. "External fields: Input
E_HEADING = 'EXTRA GI'(002).
ENDIF.
ENDIF.
IF MIGO_HTAB = 'GR'.
CALL FUNCTION 'ZMIGO_BADI_PUT_HEADER'
EXPORTING
IS_MIGO_BADI_HEADER_FIELDS = GS_EXDATA_HEADER.
ENDIF.
IF MIGO_HTAB = 'GI'.
CALL FUNCTION 'ZMIGO_BADI_PUT_HEADER_GI'
EXPORTING
IS_MIGO_BADI_HEADER_FIELDS = GS_EXDATA_HEADER.
ENDIF.
ENDMETHOD.
Abhinav Singh -
How to get MRP indiactor in Excise Invoice tab in MIGO
Hi All,
My client wants MRP indicator field in Excise tab in MIGO.
Please suugest the ways to get this.
Thanks
NDSHello,
The MRP indicator can be found by clicking on the 'More documents' button on the Excise invoice tab at the header level. This pops up a screen containing the 'Miscellaneous' tab. This tab contains a check box for MRP
indicator.
Hope this helps.
Regards
Gregory Mathews -
Text is missing in migo - excise invoice tab
Hi,
I'm doing migo with excise invoice tab option, where on the left, there are options like, capture & post, part1 only, no excise entry .etc..
In that area if i use F4 option, i can see both the fields i.e field nbr as 01 and text as capture and post, after selecting, the screen shows only 01 and text is missing.
pls suggest, how to get the short text in excise invoice tab.Kunal
in our dev , it's working fine , but in prod. only we are geting such display. any idea?
Edited by: sapjj jk on Sep 22, 2008 7:12 AM
Edited by: sapjj jk on Sep 22, 2008 9:19 AM -
Excise Invoice Tab should not open at GRN
Hello all,
I am trying to procure assets with account assignment A and without material code. I am using 0% tax. We also do not have any records in J1ID tcode.
However, during GRN the Excise invoice tab is opening up.
One way to get around at GRN is to use " no excise entry". But this tab should not be opening at all.
Can you guess what configuration, if any, might be making the system propose excise for the PO. The PO item is not excisable in fact.
Thanks and regards,
SoumyadeepHi,
If you using asset PO without material master with a vendor. Now if you do not want excise TAB should come in MIGO, then remove vendor number in J1ID t.code and then do GR.
If you want to enter excises details , then you should slect check box of "Duty different at GR" check box selected ( so that you can entry manually the excises value in MIGO screen) in MIGO Setting segment in Maintaining Excise Group setting in following path
SPRO ->>Logistics general ->> tax on Goods Movements-->>India -->> Basic setting -->>Maintain Excise Groups
NOTE:
If you want Excise fields are should not be open, then you DO NOT should select check box of "Duty different at GR" in the above path. But think what about Dealer Invoice Scenarios.
Regards,
Biju K -
Excise Invoice tab In MIGO transaction code
Hello
Could any body suggest, In Excise Invoice tab In MIGO transaction code I am getting "06 No Excise Entry" no otehr fields are coming.? All options like
01 Capture & Post Excise Invoice
02 Refer & Post Excise Invoice
03 Only Capture Excise Invoice
04 Only Refer Excise Invoice
05 Only Part1
Should come. Infact in my SAND Box client it is o.k but with same setting Golden Client it is not coming.?
Thanks & Regards
SudhansuHi,
These options are coming from Excise Group settings.
Go to : SPRO-Logistics General-Tax on Goods movements-India-Basic settings-Maintain Excise Groups-in 'MIGO Settings' tab, select the check boxes, accordingly you will get the options in Excise Tab of MIGO screen.
Hope this will resolve your issue.
Regards,
Gopi Chand -
Excise Invoice Tab is not displaying in MIGO Display for 541 material docs.
Dear All,
Excise Invoice Tab is not getting displayed in MIGO Display for 541(Transfer posting to Vendor) material documents.
I did tranfer posting of some raw materials to the Vendor in MB1B with the movement type 541
and after that i have created a Subcontracting Challan with the reference of the above created transfer posting
material document.
Now i need the Sub contracting challan number to be displayed in the Excise Tab of the transfer posting material document.
But if i display the Transfer posting material document in MIGO, the Excise Tab is not getting displayed.
Kindly help on this so that i can view the Sub contracting challan number in the display of the respective Trasfer posting material document in MIGO.
Thanks & Regards.Pls confirm if you are following the SC process sequence :
u2022 Creation of Subcontracting PO, here in conditions tab maintain the price (Subcontracting charge) (ME21N)
u2022 Transfer Posting of Components to Subcontractor ( Movmt Type - 541) (MB1B/ME2O/MIGO)
u2022 Creation of Subcontracting Challan w.r.t. Transfer Posting Doc (J1IF01) - This challan will have the details normally company needs, in case client need more ... ABAPer have to develop customized smart form
u2022 Goods Receipt w.r.t. Subcontracting PO and Refer Subcontracting Challan at the time of GR (MIGO) {GR with 101 and auto consumption of components with 543 movement}
u2022 Reconciliation of Subcontracting Challan (J1IFQ)
u2022 Completion of Subcontracting Challan (J1IF13)
u2022 Generation of Annexure IV (J1IFR -
Excise Invoice Tab in MIGO for non-codified materials
Hi!
While doing MIGO against PO, for non-codified materials ( No material code, Account assignment in P.O - F), Excise Invoice Tab Pop-Up is coming in MIGO. There is no excise related master data maintained in J1ID.
What could be the reason? Can any body suggest in this reg..
I am using ECC 6.0
Thanks & Regards,
Gopi ChandHi,
These options are coming from Excise Group settings.
Go to : SPRO-Logistics General-Tax on Goods movements-India-Basic settings-Maintain Excise Groups-in 'MIGO Settings' tab, select the check boxes, accordingly you will get the options in Excise Tab of MIGO screen.
Hope this will resolve your issue.
Regards,
Gopi Chand -
Excise Invoice Tab not appeared in MIGO Display mode
Dear All Guru,
we are facing a problem after posting excise invoice,we are not able to see excise invoice tab in MIGO display mode .We are done all necessary patch uploading but there are some ABAP programming change related to MIGO display.
Pls, send necessary note or some clue.
Thanks,
AbhijitHi Abhijit,
How you posted the excise invoice, have you done this posting in MIGO transaction or in J1IEX transaction.
If you have not gor the Excise tab in MIGO while posting you cann't get the same after posting also. You need to do settings for this in IMG settings for the excise group customization then you will get this excise invoice tab in MIGO
Hope you understand.
rgds
Chidanand -
ECS and SEcess field missing in Excise Invoice Tab in MIGO
What config settings in SAP 4.7 do I need in order to get the ECS and SEcess field in Excise Invoice Tab in MIGO.
Went through few threads but was unable to get a solution......HI,
In SPRO-Logistic general-Tax on goods movement-India -Basic setting-Maintain excise registration
here check your for excise registration number you have mark check for for cess and AT1
it should be there
second check you have maintain 100% setoff condition in your PO for same condition
Regards
Kailas Ugale -
"No Excise Entry" option in MIGO - Excise Invoice tab
Hi,
While doing MIGO for excise related items, in Excise invoice tab, various options are there based on the Excise Group settings. Apart from that, " 06 No Excise Entry" option is also coming.
Client does not want this " 06 No Excise Entry" option in Excise invoice tab.
How to remove this option, can any one please suggest the solution.
Thanks in advance.
Thanks & Regards,
Gopi ChandHi gopi
Take help of ABAPER
OR go migo screen, in excise invoice tab, select that field press F1, click on technical inoformation, click on Data element-J_1IEXCISE_ACTION click again J_1IEXCISE_ACTION then go to value Range screen here you get values in that screen you can delete this value or hide by click on confgure tab on right side,
but here yoy requird Access key for change
regads
Vipin -
while doing GR, in some cases excise invoice tab appears after clicking item OK, but in some cases it doesnt. What may be the reason?
What data related to J1ID, I will hav to maintain to get that tab while doing GR in every case? Or any other data wud be missing?Hi,
in J1ID u have to maintain:
1) chapter id
2) material and chapter id combination
3) cenvat determination
4) vendor excise details
in ur case either for some of the material chapter id and material combination has not been maintained or the vendor excise details is missing.
plz check this things.
regards
jash -
Excise Invoice Tab is not display in MIGO for Cancelled document
Hi,
We are execuating the incoming excise cycle then in MIGO and J1IEX.It is perfectly working.But in case of cancellation the excise tab is not dispplaying in MIGO.We are using option "Only Capture and Both Capture & Post".Whatever the excise captured and Posted , it is updated in Excise Invoice tab in MIGO.
As per my understanding the excise tab should come for cancelled doucment also.
Regards
RajevHi,
You are correct it won'y come for 102 but it will come for 101.But it is not coming for 101 .It is not coming when we cancelled the document.
but it will come for 101
.But it is not coming for 101
can you explain your statement ?
If it is not coming for 101 movement type
check following point
1) tax code in PO ,all excise condition should be there
2) Maintain chapter ID material combination in J1ID
3) Maintain Vendor and Plant excise details in J1ID
Regards
Kailas Ugale -
"Only Part I" for Goods receipt (MIGO) in excise invoice tab
Dear Gurus,
I have configured a material with all CIN configuration setting, while doing goods receipt for that material I want to capture excise invoice through excise invoice tab, for which i need to select " Only Part 1" in the invoice tab.
But in my currrent senario while posting goods recipt, In excise invoice tab, I am not detting " Only part 1" option when i select excise invoice tab.
How to configure "only part 1" option to appear in excise invoice tab.
Kindly help...
Regards,
Prashanth PaiHi,
Check in
Tax on Goods Movements - India - Business Transactions - Incoming Excise Invoices - Specify Which Movement Types Involve Excise Invoices -
ensure that RG23A & RG23 C Register is maintained against the movement types you are using.
Regards,
Vikas -
Excise Invoice tab not appearing in MIGO
Hi all,
While doing MIGO, we only capture Excise Invoice and Part I is updated. We avail Cenvat thru J1IEX and update Part II separately. We could process both these transactions but after posting, when we display the GR, we can not see the Excise Invoice Tab and Excise item though entries have been posted.
Can anybody suggest how can we bring this tab in GR display
Bhaven SelarkaHi,
1)Have U created Master Data in J1ID,If U are allready Created Master Data pls Check Mtrl Type(It should not Non Cenvatable)
2)If you are following TAXINN,Then u should maintain Tax code to Company code.
If u are Using TAXINJ,U should maintain Excise Defaults.
3)In Excise Group,U should Activate MIGO transactions.
4)Check ur TAX code,Tax code is Deductable or non dedctable.
Raghu
Maybe you are looking for
-
i bought a iphone from my freind and its disabled and i have tried to restore it but when i do i tells me i need a update, and when i do this it tells me i need to wait 6 hours for the update and i just need to restore the iphone. i need help
-
Installing new version of quicktime
Hi, I am trying to install a new version of quicktime. when I get to the end , it says that an older version is installed on my computer and can't be removed. contact your technical support group. How do I rectify this? thanks
-
Error While Exporting cXML DTD
Hi, I have downloaded latest version of cXML DTD and when I upload it to ESR throgh External Definitions with the option 'From the First ELEMENT', I get the folloing errors: "Error when parsing DTD document com.sap.aii.utilxi.dtd.api.DtdException: En
-
Hi forum, This is my first day in learning Javascript for acrobat I used the tutorial script to merge 2 pdf, but its showing syntax error, please help, i am just a beginner, Below is my code // Create a new PDF document: var newDoc = app.newDoc(); //
-
Lower sound Zen Vision Plus than Zen Micro Pho
Hello! I have had Zen Micro/Zen Micro Photo in -2 years, before I this year switched to some Asono player, but the sound was low on that, and I wanted to go back to Creative for it's quality and sound.So I bought the new small Zen Vision Plus, very s