Tab Index for UI elements
Hiii Everyone,
I have a view which is like an entry form and i want to set the focus for the elements in the series in which they are displayed on the view.
e.g Firstly I have sat the focus on Name then when i press tab from the keyboard it should set the focus to the Address input field.
Can anyone tell me how this can be done???
Thanks
Ishita
Hi ishita,
On tab press the traversal happen as the order that you placed the controls in your view. And if you are using multiple Transparent Containers or any other containers in the view; that would give the same problem that you described before.
Try with only one container and most likely use Matrix layout for good arrangement of UI elements. This time it will work.
Regards
- Vinod
Similar Messages
-
How to create tab indexing for jtextBox
Dear Forum
i am user of jDeveloper.
And working on JClient/Swing application.
In "Jframe.java" i add various cotrols such as jTextbox,jCombobox ,jlabel etc.
So how to create tab indexing for these controls.
GirdherDear Forum
i am user of jDeveloper.
And working on JClient/Swing application.
In "Jframe.java" i add various cotrols such as jTextbox,jCombobox ,jlabel etc.
So how to create tab indexing for these controls.
Girdher -
Tab index for htmlB controls for java
Hi,
How can we set the tab index for HtmlB Conrols for java.
Thanks,
PadmajaHi Padmaja,
I'd suggest you use the following:
TabStrip myTabStrip = new TabStrip("myTabStrip");
TabStripItem myItem = myTabStrip.addTab(1); <=== Tab index specified as 1
Index position can be specified using the addTab(<index>) method.
Regards,
Divya -
Using a For Loop Index for Array Element Number?
Hi. Thanks in advance for the help. I can't seem to find what I want to do here using the search function... probably because I don't know how to frame the question appropriately. Ignore the title to this post cause it's probably wrong vocabulary for what I want to do.
Here's the situation:
I have a 2D array where the first column is the X data and each subsequent column is Y data (call it Y1...Yn). The n-value varies from run to run (some runs have 4 columns of data, some have 20), but that is easily gathered when reading the data file. I need to perform a number of operations on each set of data, the least of which is smoothing the data and graphing it, so I'm limiting my discussion to these 2 operations.
What I want is a for loop structure where the indexing of the loop tracks the Y1...Yn columns, grabs each column for the iteration, performs the relevant analysis, and spits out the result, but in a stackable manner. Thus the title; I want to use the for loop's index to mark the array element for building a new array.
See the image attached. A 2D array of 9 columns (X, Y1...Y8) is analyzed such that each data set, (X, Y1), (X, Y2)...(X, Y8) is bundled, graphed, run through a B-spline Fit, of which is also graphed. I need to replace this with something that looks like the for loop structure shown.
I just don't know how to get those two data bundles [(X, Yi) and it's smoothed pair] out of the for loop in a stacked set from every iteration of the for loop.
Again the title, I think I want to build a new array where i use the index of the for loop to control the entries of the new array. But I can't see how to do that.
Any help would be appreciated.
Attachments:
NeedForLoopForThis.PNG 30 KBHello H.R. Dunham, and welcome to the forum!
It seems that you may be looking for Auto-Indexing, a basic feature of loops in LabVIEW. You'll need to transpose your array before wiring it into the for loop, as elements are auto-indexed by row before column, but at that point you should be able to operate on each column and output an array of n cluster elements corresponding to your input columns. Auto-indexing tunnels look like brackets to indicate each element will be indexed automatically- this should be the default when wiring an array into a for loop or when wiring anything out of a for loop.
As for how to build your pairs, I suggest removing the X column and creating a "starter" cluster containing your X data and placeholder Y data before entering your "Y" processing loop. Use the bundle by name function in the for loop to insert your processed column data into the cluster and auto-index the cluster output. Flow would be something like this:
1) Gather data
2) Split X and Y using standard array operations
3) Create "template" cluster with shared X data
4) Pass template cluster and Y-column array into an auto-indexed for loop.
5) Insert processed Y data into cluster inside loop.
6) Auto-index cluster data out of loop.
This tutorial is probably also a good place to get started:
Getting Started with NI LabVIEW Module 3: Loops
http://www.ni.com/white-paper/7528/en/
Hope that helps!
Regards,
Tom L. -
How to disable the tab focusing for a JTextField object because those ...
Hi All,
Here I need some help. I want to disable the tab focusing( tab index) for a JTextField objects because those objects are set as setEditable(false). Also can u tell me about how to change the tab index orders for JTextFields.
Many thanks,
Vijaycanaan.I want to disable the tab focusing( tab index) for a JTextField objectsLook through the API and find methods with the word "focus" in the method name.
Also can u tell me about how to change the tab index orders for JTextFields."How to Use the Focus Sub System":
http://java.sun.com/docs/books/tutorial/uiswing/misc/focus.html -
'Incorrect value type for array element in index N'
Please help. Preflight is flagging multiple 'Incorrect value type for array element in index N" > Required key /F is missing >Array element at index 0 is of wrong type' messages for pages throughout my text document with embedded navigation and annotations.What does it mean? Is there anything I can do?
The origins of the file are from a selection of emails taken from Mail and gmail, and letters probably written on pc (Office) and converted to pdf...
I'm on Mac Mavericks.
Thanks for reading.What problem are you trying to solve with preflighting? What are you checking for?
-
.js update of spry accordion panel tab data for countdown functionality
Hi,
First off I must say I really love the work done on CS3 and
the Spry Framework - loads of examples and nicely implemented!
Questions in a nutshell:
Can I change spry generated data on the fly so I can run a
.js counter function to dynamically update accordion panel data?
What event do I look for to fire a .js init function to see my new
spry widget (onPostLoad isn't working for me, but I'm a newbie!)?
* spry accordion
* {expire} dataset data is SQL DATETIME
* js countdown function CD_Init() searches DOM for specific
element IDs 'countdownN' and uses innerHTML to update counter at
specific interval
* observer onPostLoad seems to be calling CD_Init before
accordion DOM is loaded.
Verbose questions:
I am trying to tweek the output of a Spry Acoordion and
wanted to add a third party js counter to my accordion panel tab
and am having a bit of difficulty. The js code uses an innerHTML
statement to keep the counter going and supports multiple counters
(which I need to use one counter per tab). I build the multiple
counter id from the ds_RowID field which is where the parent div
element where the js changes the innerHTML. Can I do this? The .js
searches for elements w/ an ID of "countdownN", N = instance # and
a date format of '2007-09-08 00:00:00 GMT+00:00' and updates the
div's text with the countdown time. My {expire} record below is an
SQL DATETIME which is the correct format for this countdown.js
function (with the GMT-05:00 appended).
The relavant code is:
<div id="specialDisplay" spry:region="dsSpecials">
<h3>Click on a special below from our <em>LIVE
FEED</em> to see all the up-to-the-moment
exciting packages available!</h3>
<div id="AccordionSpecials" class="Accordion">
<div class="AccordionPanel" spry:repeat="dsSpecials">
<div class="AccordionPanelTab"
onclick="dsSpecials.setCurrentRowNumber('{dsSpecials::ds_RowID}')"
spry:hover="AccordionPanelLabelHover"><?php echo '<div
id="countdown' .'{ds_RowID}'. '">';?>{expire}
GMT-05:00</div>{dsSpecials::name}</div> <!--
accordion panel tab -->
<div class="AccordionPanelContent">
<div spry:state="loading"><img
src="./i/ajax-loader.gif"/></div> <!-- loading -->
<div spry:state="error"><span spry:content="Error
loading data..."></span></div> <!-- error -->
<div id="details" spry:state="ready"
spry:content="{detail}"></div> <!-- detail when ready
-->
</div> <!--accordion panel content -->
</div> <!-- accordion panel -->
<script type="text/javascript">
<!--
var AccordionSpecials = new
Spry.Widget.Accordion("AccordionSpecials", { defaultPanel: 0,
duration: 1000, useFixedPanelHeights: false, enableAnimation:true }
var observer = { onPostLoad: function(notifier, data) {
CD_Init() ; /*alert("postLoad"); */} };
//specialDisplay dsSpecials.addObserver(observer);
Spry.Data.Region.addObserver("specialDisplay", observer);
//-->
</script>
</div> <!-- accordion -->
</div> <!-- specialDisplay -->
I got the nice countdown.js script from
http://andrewu.co.uk/clj/countdown/
which allows N # of counters/page. I have updated this code to
start checking for a zero based index that I generate utilizing the
spry ds_RowID.
I have added an observer to run the countdown's
initialization function (to hopefully find all the "countdownN"
element instances) under my dataset declarations:
var observer = { onPostUpdate: function(notifier, data) {
CD_Init() ; } };
Spry.Data.Region.addObserver("AccordionSpecials", observer);
Also tried to add the observer to a div surrounding the
according w/ the "spry:region" specified.
But, alas, I see the correct expire instance in my tab, but
it looks like the counter is only firing before the actual data is
loaded (i.e. I used FF's webdeveloper and set a break on the
CD_Init function and it's breaking before the actual accordion is
there - I see the dataset placeholders in my window for the
accordion. When I continue, the accordion is generated, but my
countdown isn't working because it looks to be firing before the
DOM is updated w/ the accordion elements.
Sorry for the long speil; I'm really a .js neophyte and just
starting w/ spry - so I'm not even sure if I can/should change the
HTML generated from spry. If not, is there anyway that I can have a
countdown timer for each accordion's tab panel's associated
{expire} data field? Any ideas and suggestions are greatly
appreciated!!
Thank you also for this forum - some great gems for
development here!Sorry - the previous post is way too long.
Is it possible to tie in a javascript update function (a
counter update) to an element generated by a spry widget (a dataset
value that generates spry accordion tab text) so that the accordion
tab gets updated by the javascript function running under a
setinterval?
I've tried firing the javascript init function with an
observer on the accordion's onPostUpdate event, but it's getting
fired before the spry data is loaded. Is this something that's
possible? Sorry for my lack of javascript expertise! Relying on the
real experts here!
Thanks for any advice/pointers. -
Please help me create the indexes for this XML
Hi Mark and others,
What is the way to create the correct index for this kind of XML (I posted earlier)? I created the indexes without using those prefixes without any problems but they do not seem to be used during processing. For 300 statutes, it took about 10 minutes! For the smplier verion, I created indexes and it took no more than 30 seconds to process more than 4000 statutes.
<AllStatuteQueryResponse xmlns="http://crimnet.state.mn.us/mnjustice/statute/service/3.0">
<ns1:Statutes xmlns:ns1="http://crimnet.state.mn.us/mnjustice/statute/messages/3.0">
<ns1:Statutes>
<ns2:StatuteId xmlns:ns2="http://crimnet.state.mn.us/mnjustice/statute/3.0">1</ns2:StatuteId>
<ns3:Chapter xmlns:ns3="http://crimnet.state.mn.us/mnjustice/statute/3.0">84</ns3:Chapter>
<ns4:Section xmlns:ns4="http://crimnet.state.mn.us/mnjustice/statute/3.0">82</ns4:Section>
<ns5:Subdivision xmlns:ns5="http://crimnet.state.mn.us/mnjustice/statute/3.0">1a</ns5:Subdivision>
<ns6:Year xmlns:ns6="http://crimnet.state.mn.us/mnjustice/statute/3.0">0</ns6:Year>
<ns7:LegislativeSessionCode xmlns:ns7="http://crimnet.state.mn.us/mnjustice/statute/3.0">
<ns7:StatuteCode>
<ns7:code>4</ns7:code>
<ns7:description>4</ns7:description>
</ns7:StatuteCode>
</ns7:LegislativeSessionCode>
<ns8:SessionTextIndicator xmlns:ns8="http://crimnet.state.mn.us/mnjustice/statute/3.0">false</ns8:SessionTextIndicator>
<ns9:HeadNoteIndicator xmlns:ns9="http://crimnet.state.mn.us/mnjustice/statute/3.0">false</ns9:HeadNoteIndicator>
<ns10:EffectiveDate xmlns:ns10="http://crimnet.state.mn.us/mnjustice/statute/3.0">1859-01-01</ns10:EffectiveDate>
<ns11:EnactmentDate xmlns:ns11="http://crimnet.state.mn.us/mnjustice/statute/3.0">1859-01-01</ns11:EnactmentDate>
<ns12:RepealedIndicator xmlns:ns12="http://crimnet.state.mn.us/mnjustice/statute/3.0">false</ns12:RepealedIndicator>
<j:DocumentLocationURI xmlns:j="http://www.it.ojp.gov/jxdm/3.0.2">
<j:ID xsi:type="j:TextType" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">http://www.revisor.leg.state.mn.us/stats/84/82.html</j:ID>
</j:DocumentLocationURI>
<ns13:SummaryDescriptionText xmlns:ns13="http://crimnet.state.mn.us/mnjustice/statute/3.0">Snowmobiles-Snowmobile registration</ns13:SummaryDescriptionText>
<ns14:StatuteFunction xmlns:ns14="http://crimnet.state.mn.us/mnjustice/statute/3.0">
<ns14:StatuteIntegrationId>1</ns14:StatuteIntegrationId>
Thanks!
BenHi Mark, here is the schema. I did not register the schema, because when I processed the simpler version, I did not either and I just created the indexes. I did not create an VARRAY in the table. The DDL is simply create table CStatute_XML(id number, xmldoc xmltype).
Schema:
<?xml version="1.0" encoding="UTF-8"?>
<!-- CriMNet -->
<!-- Minnesota Criminal Justice Statute Web Service Data Dictionary -->
<!-- Dave Everson -->
<!-- Version 3.0 -->
<xsd:schema targetNamespace="http://crimnet.state.mn.us/mnjustice/statute/3.0" elementFormDefault="qualified" attributeFormDefault="unqualified" version="3.0" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://crimnet.state.mn.us/mnjustice/statute/3.0">
<xsd:element name="StatuteCode">
<xsd:annotation>
<xsd:documentation>
This complex type is a generic structure representing code value sets defined in the Minnesota Criminal Justice Statute Service.
A single element of the value set contains both a code value (e.g. F) and a description (e.g. Felony).
The following concepts within the MNCJSS are represented by this complex type:
OffenseSummary
OffenseSummarySeverityLevel
LegislativeSession
Function
OffenseLevel
OffenseSeverityLevel
DetailedOffenseCode
GeneralOffenseCode
</xsd:documentation>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="code" type="xsd:string"/>
<xsd:element name="description" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="StatuteId" type="xsd:integer">
<xsd:annotation>
<xsd:documentation>Primary Key reference to Minnesota Criminal Justice Statute Service disseminated by CriMNet</xsd:documentation>
<xsd:appinfo>Statute.statuteId</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="StatuteIntegrationId" type="xsd:integer">
<xsd:annotation>
<xsd:documentation>Primary Key reference to the StatuteFunction object within the Minnesota Criminal Justice Statute Service disseminated by CriMNet</xsd:documentation>
<xsd:appinfo>StatuteFunction.statuteIntegrationId</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="FunctionCode">
<xsd:annotation>
<xsd:documentation>TBD</xsd:documentation>
<xsd:appinfo>StatuteFunction.Function</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="StatuteCode"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="OffenseSummaryCode">
<xsd:annotation>
<xsd:documentation>TBD</xsd:documentation>
<xsd:appinfo>StatuteFunction.OffenseSummary</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="StatuteCode"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="OffenseSummarySeverityLevelCode">
<xsd:annotation>
<xsd:documentation>TBD</xsd:documentation>
<xsd:appinfo>StatuteFunction.OffenseSummary.OffenseSummarySeverityLevel</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="StatuteCode"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="OffenseLevelCode">
<xsd:annotation>
<xsd:documentation>TBD</xsd:documentation>
<xsd:appinfo>StatuteFunction.OffenseLevel</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="StatuteCode"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="OffenseSeverityLevelCode">
<xsd:annotation>
<xsd:documentation>TBD</xsd:documentation>
<xsd:appinfo>StatuteFunction.OffenseSeverityLevel</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="StatuteCode"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="LegislativeSessionCode">
<xsd:annotation>
<xsd:documentation>TBD</xsd:documentation>
<xsd:appinfo>StatuteChapterSection.LegislativeSession</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="StatuteCode"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="GeneralOffenseCode" nillable="true">
<xsd:annotation>
<xsd:documentation>An integer (1-9) identifier of a general statute category code used for statistical analysis.</xsd:documentation>
<xsd:appinfo>StatuteFunction.DetailedOffenseCode.GeneralOffenseCode</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="StatuteCode"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="DetailedOffenseCode" nillable="true">
<xsd:annotation>
<xsd:documentation>An identification number associated with a statute offense type in the form of nnn.nnn. From a list of 350. Corresponds to the StatuteOffinseTypeText.</xsd:documentation>
<xsd:appinfo>StatuteFunction.DetailedOffenseCode</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="StatuteCode"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Chapter" type="xsd:string">
<xsd:annotation>
<xsd:documentation>A numeric identifier of a chapter within a statute.</xsd:documentation>
<xsd:appinfo>Statute.chapter; StatuteChapterSection.chapter</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="Section" type="xsd:string" nillable="true">
<xsd:annotation>
<xsd:documentation>An integer number identifier of a section of a chapter of a statute.</xsd:documentation>
<xsd:appinfo>Statute.section; StatuteChapterSection.section</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="Subdivision" type="xsd:string" nillable="true">
<xsd:annotation>
<xsd:documentation>An identifier of a subdivision within a code book.</xsd:documentation>
<xsd:appinfo>Statute.subdivision</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="HeadNoteIndicator" type="xsd:boolean">
<xsd:annotation>
<xsd:documentation></xsd:documentation>
<xsd:appinfo>StatuteChapterSection.headNote</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="Year" type="xsd:int">
<xsd:annotation>
<xsd:documentation>TBD</xsd:documentation>
<xsd:appinfo>StatuteChapterSection.year</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="EffectiveDate" type="xsd:date" nillable="true">
<xsd:annotation>
<xsd:documentation>The date a statute came into effect</xsd:documentation>
<xsd:appinfo>Statute.effectiveDate</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="ExpirationDate" type="xsd:date" nillable="true">
<xsd:annotation>
<xsd:documentation>The date a statute was not longer effective.</xsd:documentation>
<xsd:appinfo>Statute.effectiveDate</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="EnactmentDate" type="xsd:date" nillable="true">
<xsd:annotation>
<xsd:documentation>A date a statute was signed into law.</xsd:documentation>
<xsd:appinfo>Statute.enactmentDate</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="RepealedIndicator" type="xsd:boolean">
<xsd:annotation>
<xsd:documentation>A date a statute number was repealed, amended, or renumbered.</xsd:documentation>
<xsd:appinfo>Statute.repealedFlag</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="HeadNote" type="xsd:boolean">
<xsd:annotation>
<xsd:documentation></xsd:documentation>
<xsd:appinfo>Statute.headNote</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="SummaryDescriptionText" type="xsd:string" nillable="true">
<xsd:annotation>
<xsd:documentation>A long description of a statute.</xsd:documentation>
<xsd:appinfo>Statute.summaryText</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="LegislativeText" type="xsd:string" nillable="true">
<xsd:annotation>
<xsd:documentation>The legislative of a statute.</xsd:documentation>
<xsd:appinfo>StatuteChapterSection.legislativeText</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="SessionTextIndicator" type="xsd:boolean">
<xsd:annotation>
<xsd:documentation></xsd:documentation>
<xsd:appinfo>StatuteChapterSection.sessionTextFlag</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="FunctionText" type="xsd:string" nillable="true">
<xsd:annotation>
<xsd:documentation></xsd:documentation>
<xsd:appinfo>StatuteFunction.functionText</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="JuvenileOnlyIndicator" type="xsd:boolean">
<xsd:annotation>
<xsd:documentation>An indicator identifying whether a statute applies to juveniles only.</xsd:documentation>
<xsd:appinfo>StatuteFunction.juvenileOnlyFlag</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="CrimeOfViolenceIndicator" type="xsd:boolean">
<xsd:annotation>
<xsd:documentation>An indicator identifying whether a statute is a crime of violence under Minnesota statute 624 section 712 subdivision 5.</xsd:documentation>
<xsd:appinfo>StatuteFunction.crimeOfViolenceFlag</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="EnhanceableIndicator" type="xsd:boolean">
<xsd:annotation>
<xsd:documentation>An indicator identifying whether the charges are enhanceable by specific factors (the definition of enhanceable is pending review).</xsd:documentation>
<xsd:appinfo>StatuteFunction.enhanceableFlag</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="TargetedMisdemeanorIndicator" type="xsd:boolean">
<xsd:annotation>
<xsd:documentation>An indicator identifying whether a statute is a targeted misdemeanor as defined in Minnnesota Statute 299C.10, subdivision. 1(d).</xsd:documentation>
<xsd:appinfo>StatuteFunction.targetedMisdemeanorFlag</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="MandatoryAppearanceIndicator" type="xsd:boolean">
<xsd:annotation>
<xsd:documentation></xsd:documentation>
<xsd:appinfo>StatuteFunction.mandatoryAppearanceFlag</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="RegisterableOffenseIndicator" type="xsd:boolean">
<xsd:annotation>
<xsd:documentation></xsd:documentation>
<xsd:appinfo>StatuteFunction.registerableOffenseFlag</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="StatuteFunction">
<xsd:annotation>
<xsd:documentation></xsd:documentation>
<xsd:appinfo>StatuteFunction</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="StatuteIntegrationId" />
<xsd:element ref="FunctionCode"/>
<xsd:element ref="FunctionText" minOccurs="0" maxOccurs="1"/>
<xsd:element ref="CrimeOfViolenceIndicator"/>
<xsd:element ref="EnhanceableIndicator"/>
<xsd:element ref="TargetedMisdemeanorIndicator"/>
<xsd:element ref="RegisterableOffenseIndicator"/>
<xsd:element ref="JuvenileOnlyIndicator"/>
<xsd:element ref="MandatoryAppearanceIndicator"/>
<xsd:element ref="OffenseLevelCode" minOccurs="0" maxOccurs="1"/>
<xsd:element ref="GeneralOffenseCode" minOccurs="0" maxOccurs="1"/>
<xsd:element ref="DetailedOffenseCode" minOccurs="0" maxOccurs="1"/>
<xsd:element ref="OffenseSummaryCode" minOccurs="0" maxOccurs="1"/>
<xsd:element ref="OffenseSummarySeverityLevelCode" minOccurs="0" maxOccurs="1"/>
<xsd:element ref="OffenseSeverityLevelCode" minOccurs="0" maxOccurs="1"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
Query:
first part to get the statute ID numbers,
insert into CriMNet_Statutes
select cs.StatuteId, cs.Chapter, cs.Section, cs.Subdivision, cs.Year, cs.LegCode,
cs.LegDesc, cs.SessionTextIndicator, cs.HeadNoteIndicator,
to_date(cs.EffectiveDate, 'yyyy/mm/dd') as eDate,
to_date(cs.EnactmentDate, 'yyyy/mm/dd') as EnDate,
cs.RepealedIndicator, cs.SummaryDescriptionText
from Cstatute_xml,
xmltable
xmlnamespaces
default 'http://crimnet.state.mn.us/mnjustice/statute/3.0',
--- or 'http://crimnet.state.mn.us/mnjustice/statute/3.0' as "cs"
'http://crimnet.state.mn.us/mnjustice/statute/service/3.0' as "cx",
'http://crimnet.state.mn.us/mnjustice/statute/messages/3.0' as "ns1"
'/cx:AllStatuteQueryResponse/ns1:Statutes/ns1:Statutes'
--- '/AllStatuteQueryResponse//ns:Statutes' --- produces an extra row
passing SXMLDOC
columns
StatuteId varchar2(10) path '//StatuteId',
Chapter varchar2(10) path '//Chapter',
Section varchar2(20) path '//Section',
Subdivision varchar2(20) path '//Subdivision',
Year number path '//Year',
LegCode varchar2(10) path '//LegislativeSessionCode/StatuteCode/code',
LegDesc varchar2(10) path '//LegislativeSessionCode/StatuteCode/description',
SessionTextIndicator varchar2(10) path '//SessionTextIndicator',
HeadNoteIndicator varchar2(10) path '//HeadNoteIndicator',
EffectiveDate varchar2(15) path '//EffectiveDate',
EnactmentDate varchar2(15) path '//EnactmentDate',
RepealedIndicator varchar2(10) path '//RepealedIndicator',
SummaryDescriptionText varchar2(150) path '//SummaryDescriptionText'
) cs;
Second part to get the function code for each statute ID (one ID to many function codes).
declare
v_statuteID number;
v_statuteIDC varchar2(10);
cursor c_cmns is
select statuteid from CriMNet_Statutes;
begin
for v_cmns in c_cmns loop
v_StatuteID := v_cmns.StatuteID;
v_statuteIDC := to_char(v_statuteID);
insert into CriMNet_Statute_Function
select v_StatuteID, cf.* from Cstatute_xml,
xmltable
xmlnamespaces
'http://crimnet.state.mn.us/mnjustice/statute/3.0' as "cs",
'http://crimnet.state.mn.us/mnjustice/statute/service/3.0' as "cx",
'http://crimnet.state.mn.us/mnjustice/statute/messages/3.0' as "ns1"
'for $cxm in /cx:AllStatuteQueryResponse/ns1:Statutes/ns1:Statutes[cs:StatuteId = $val/pStatuteId]/cs:StatuteFunction
return
<cs:CSFunction>
<cs:StatuteIntegrationId>{$cxm//cs:StatuteIntegrationId}</cs:StatuteIntegrationId>
<cs:FunctionCode>{$cxm//cs:FunctionCode/cs:StatuteCode/cs:code}</cs:FunctionCode>
<cs:FunctionDesc>{$cxm//cs:FunctionCode/cs:StatuteCode/cs:description}</cs:FunctionDesc>
<cs:CrimeOfViolenceIndicator>{$cxm//cs:CrimeOfViolenceIndicator}</cs:CrimeOfViolenceIndicator>
<cs:EnhanceableIndicator>{$cxm//cs:EnhanceableIndicator}</cs:EnhanceableIndicator>
<cs:TargetedMisdIndicator>{$cxm//cs:TargetedMisdemeanorIndicator}</cs:TargetedMisdIndicator>
<cs:RegisterableOffIndicator>{$cxm//cs:RegisterableOffenseIndicator}</cs:RegisterableOffIndicator>
<cs:JuvenileOnlyIndicator>{$cxm//cs:JuvenileOnlyIndicator}</cs:JuvenileOnlyIndicator>
<cs:MandatoryAppIndicator>{$cxm//cs:MandatoryAppearanceIndicator}</cs:MandatoryAppIndicator>
<cs:OffenseLevelCode>{$cxm//cs:OffenseLevelCode/cs:StatuteCode/cs:code}</cs:OffenseLevelCode>
<cs:OffenseLevelDesc>{$cxm//cs:OffenseLevelCode/cs:StatuteCode/cs:description}</cs:OffenseLevelDesc>
<cs:GeneralOffenseCode>{$cxm//cs:GeneralOffenseCode/cs:StatuteCode/cs:code}</cs:GeneralOffenseCode>
<cs:GeneralOffenseDesc>{$cxm//cs:GeneralOffenseCode/cs:StatuteCode/cs:description}</cs:GeneralOffenseDesc>
<cs:DetailedOffenseCode>{$cxm//cs:DetailedOffenseCode/cs:StatuteCode/cs:code}</cs:DetailedOffenseCode>
<cs:DetailedOffenseDesc>{$cxm//cs:DetailedOffenseCode/cs:StatuteCode/cs:description}</cs:DetailedOffenseDesc>
<cs:OffenseSummaryCode>{$cxm//cs:OffenseSummaryCode/cs:StatuteCode/cs:code}</cs:OffenseSummaryCode>
<cs:OffenseSummaryDesc>{$cxm//cs:OffenseSummaryCode/cs:StatuteCode/cs:description}</cs:OffenseSummaryDesc>
<cs:OffenseSumSeverityLevelCode>{$cxm//cs:OffenseSummarySeverityLevelCode/cs:StatuteCode/cs:code}</cs:OffenseSumSeverityLevelCode>
<cs:OffenseSumSeverityLevelDesc>{$cxm//cs:OffenseSummarySeverityLevelCode/cs:StatuteCode/cs:description}</cs:OffenseSumSeverityLevelDesc>
</cs:CSFunction>'
passing SXMLDOC, xmlelement("pStatuteId", v_statuteIDC) as "val"
columns
StatuteIntegrationId number path '/cs:CSFunction/cs:StatuteIntegrationId',
FunctionCode varchar2(10) path '/cs:CSFunction/cs:FunctionCode',
FunctionDesc varchar2(30) path '/cs:CSFunction/cs:FunctionDesc',
CrimeOfViolenceIndicator varchar2(10) path '/cs:CSFunction/cs:CrimeOfViolenceIndicator',
EnhanceableIndicator varchar2(10) path '/cs:CSFunction/cs:EnhanceableIndicator',
TargetedMisdIndicator varchar2(10) path '/cs:CSFunction/cs:TargetedMisdIndicator',
RegisterableOffIndicator varchar2(10) path '/cs:CSFunction/cs:RegisterableOffIndicator',
JuvenileOnlyIndicator varchar2(10) path '/cs:CSFunction/cs:JuvenileOnlyIndicator',
MandatoryAppIndicator varchar2(10) path '/cs:CSFunction/cs:MandatoryAppIndicator',
OffenseLevelCode varchar2(10) path '/cs:CSFunction/cs:OffenseLevelCode',
OffenseLevelDesc varchar2(40) path '/cs:CSFunction/cs:OffenseLevelDesc',
GeneralOffenseCode varchar2(10) path '/cs:CSFunction/cs:GeneralOffenseCode',
GeneralOffenseDesc varchar2(60) path '/cs:CSFunction/cs:GeneralOffenseDesc',
DetailedOffenseCode varchar2(10) path '/cs:CSFunction/cs:DetailedOffenseCode',
DetailedOffenseDesc varchar2(60) path '/cs:CSFunction/cs:DetailedOffenseDesc',
OffenseSummaryCode varchar2(10) path '/cs:CSFunction/cs:OffenseSummaryCode',
OffenseSummaryDesc varchar2(60) path '/cs:CSFunction/cs:OffenseSummaryDesc',
OffenseSumSeverityLevelCode varchar2(10) path '/cs:CSFunction/cs:OffenseSumSeverityLevelCode',
OffenseSumSeverityLevelDesc varchar2(30) path '/cs:CSFunction/cs:OffenseSumSeverityLevelDesc'
) cf;
---dbms_output.put_line('Statute ID = ' || v_StatuteID);
end loop;
end;
You mentioned that I should include the namespace in the existsnode function but I did not. I am going to try after including it. Thanks.
Ben -
I need a bapi for workdownstructure elements
i need a bapi for workdownstructure elements
WBS number
WBS descriptions
WBS start date
WBS end date
Status
thanks and regards,
jameer.p
Edited by: Jameer P on Jan 30, 2008 12:59 PMHai.
It may help you.
can use WS_DOWNLOAD like this:
L_T_HEADERS TYPE TABLE OF TEXT40.
IF SP_LOCAL = 'X'.
Headings: TEXT-U01 ... TEXT-U28
DO 28 TIMES.
CLEAR: L_F_INDEX,L_F_NAME,L_F_HEADERS.
L_F_INDEX = SY-INDEX.
CONCATENATE 'TEXT-U' L_F_INDEX INTO L_F_NAME.
ASSIGN (L_F_NAME) TO <FS_HEADER>.
L_F_HEADERS = <FS_HEADER>.
APPEND L_F_HEADERS TO L_T_HEADERS.
ENDDO.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = SP_FILE
FILETYPE = 'DAT'
TABLES
DATA_TAB = L_T_OUT
FIELDNAMES = L_T_HEADERS
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE 'I' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
LEAVE PROGRAM.
ELSE.
DESCRIBE TABLE L_T_OUT LINES L_F_COUNT.
MESSAGE I145 WITH L_F_COUNT SP_FILE.
ENDIF.
Regards.
Sowjanya.b. -
Deleting/reconstructing indexes for InfoCube 0PUR_C04 is not permitted
Hello,
I have got the above error today while monitoring process chains. i.e error in create index and showing as 'Deleting/reconstructing indexes for InfoCube 0PUR_C04 is not permitted ' i will get this error every week and i'll repeat this ,but it is not working this time and is giving error
Last week also i've faced the same problem and i've gone for manual creation and even that too did'nt work,and i m facing same problem this week as these r weekely loads
Could any one tell me what the problem is..? as i have told u last week i have checked the create index and still it is in checked mode..Is this the problem?
pls reply..
Regards
SuriHi Bhargava,
Yes i have checked create index (batch) in performance tab last week, bcos i've faced same problem last week ,so i thought of creating the index again and that did'nt work. And i went for repair indexes(immediately) and that too did'nt work ,the job got cancelled in SM 37
And even this week(7/8/2007) also i have faced the same problem and the check button is still there for create index(batch), i have'nt checked any thing apart from this. Even i've checked in SM12 for lock entries but there r no any.
As i have mentioned chain is scheduled weekely.
how do i proceed? Step by step would be appreciated
Regards
Suri -
Segment for WBS element in Inbound Sales Order Idoc
Hi gurus,
I am trying to create an inbound idoc for sales order ' VA01'. I need to populate WBS element in the item level under Account Assignment Tab. I am using ORDERS05 basic type. Please help to find which segment to use for WBS element. Waiting for your reply. Please help.
Regards,
SatyajitHello,
As far as I know, there is no Segment / Field definition in ORDERS05 for WBS Element as it is not mandatory information to be filled in order for the Sales Order to be Complete. So, you need to create an Extension of the IDoc Type ORDERS05. For your requirement, here is the Approach I have.
1. Create an extension for IDoc Type ORDERS05 to ZORDER05 with a Custom Segment Z1EDP01 in which you'll have the Custom Field Name VBAP-PS_PSP_PNR which is the WBS Element field in VBAP Table.
2. Now, use the Customer Exit EXIT_SAPLVEDA_001 in the Enhancement VEDA0001 in which you can actually populate the Field WBS Element that would be already available in the Inbound IDoc to store it in a Work Area. As you are aware, you'll need to create a Project in CMOD for the same.
3. Export the same to some MEMORY ID 'XXX'.
4. Come back to the Selection Program for ORDER05 which is IDOC_INPUT_ORDERS in which you'll find the below CASE Statement.
CASE xaprau.
WHEN ' '.
PERFORM call_va01_new_orders USING ok.
WHEN 'Q'.
Aufruf Transaktion Auftragerfassung VA01 mit Bezug auf Angebot
call transaction Order Entry VA01 with refer to quote number.
PERFORM call_va01_new_orders_angbt USING ok.
WHEN 'C'.
Aufruf Transaktion Auftragerfassung VA01 mit Bezug auf Kontrakt
call transaction Order Entry VA01 with refer to contract number
PERFORM call_va01_new_orders_contk USING ok.
WHEN 'L'.
5. Now, since our Standard Order Type (VBAK-VBTYP) is 'C',
we'll have to choose the Subroutine for the 'C' Option.
6. In this Subroutine, there is another Subroutine va01_dynpro_kopf_kaufmann_kde2 which is for populating Custom Dynpro Fields for the Sales Order. So, we need to choose the same Subroutine inside which we have to Create an Enhancement Implementation.
7. In this Enhancement Implementation (Implicit), we have to IMPORT the value of the WBS Element which was exported in the Customer Exit.
8. Check if it is initial. If it is not, then Call the Perform as below.
IF NOT WA_Z1EDP01 IS INITIAL. "Checking if the Segment
" is Empty
PERFORM DYNPRO_SETZEN USING 'COBL-PS_POSID' WA_Z1EDP01-ZZWBSELEMENT.
ENDIF.
9. Since the Sales Orders are posting using BDC here, by calling the above Subroutine DYNPRO_xxx, we are appending our Custom Segment / Field value to the BDC_DATA table.
10. In Step 8, I've given the Notation for Work Area. It will also be applicable when there are multiple Line Items. All you have to do is to EXPORT an Internal Table instead of Work Area and use the same here for each Line Item.
11. I've given you above procedure because I've worked on similar requirement in which I had to populate the Special Processing Indicator instead of WBS Element.
Hope it would be helpful for you.
Thanks and Regards,
Venkat Phani Prasad Konduri -
Indent /tab position for text from INCLUDE texts in SAPscript
Hi, ABAP colleagues!
Need your help on this sapscript problem: How to align texts taken from "INCLUDE TEXT" in SAPscript, according to tab defined in Paragraph Format?
Or, how to control tab positions for texts which were extracted from INCLUDE text commands in SAPscript?
I defined a paragraph format with tab stop at 8 CH so that with 2 commas (,,) my text will be displayed there. However it always appears to the left (e.g. 1st column) and not indented at the proper column for description/text (e.g. which is in second column).
Pls help, bec a different heading and information is not acceptable to client for the Thailand characters.
Above is the description of the problem. Below are some technical details.
For specific example, I am editing Zversion of standard sap MM form MEDRUCK Window Main - Text Element Item Text.
BG ,,&TTXIT-TDTEXT&
/: INCLUDE &T166P-TXNAM& OBJECT &T166P-TDOBJECT& ID &T166P-TDID&
/: NEW-PARAGRAPH BG
So far, tried these approaches:
PARAGRAPH
NEW-PARAGRAPH
LANGUAGE '2'
THANGSAN font
Any ideas?
Thank you so much in advance for all your help. Our project team will really appreciate it. May the Lord bless you as we go through our SAP work!
Sincerely,
CelesteHello Caleste,
Please let me know what settings you have done to solve this issue.
Help me with steps for Spool Request/Print settings.
Regards!!
Surya -
Is it possible to place symbols in a tab of a register element?
Is it possible to place symbols in a tab of a register element (see attached VI for demonstation)?
E.g. when a error occurs on tab "Status" the red X might appear to notify the user.
For what is property node "Register content" (in German "Reiterinhalt"...) used for?
The VI is done with LV2009.
Solved!
Go to Solution.
Attachments:
Tab_and_Symbols.vi 9 KBThis document shows how to do what you're looking for.
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice
Attachments:
Tab_and_Symbols[1].vi 13 KB -
Error when creating BIA INDEX FOR CUBE
Hi
I am trying to create BIA index for a cube and I am getting error
"An error occurred. Choose "Continue" to start again from the beginning" in the second step. Could any body explain what this error mean and How to correct it.
and when I press BIA Moniter tab I am getting following message.
An error occurred. Choose "Continue" to start again from the beginning
"BIA Monitor Is Called for First Time
The RFC destination for the BI accelerator is not yet specified in the
system. Without the relevant entry in RSADMINA, the BIA monitor cannot
be executed. Do you want to enter the RFC destination now?"
Thanks in Advance
Sarath
Edited by: sarath kumar on Aug 21, 2008 9:42 AMHi,
Is there any way i can check bi accelerator installed or not for our bi server.I contacted basis team but they do not have any idea regarding this. but I heard from my ex colleage it is installed. and Reports from one cube is running very fast compared to recently created cube.
Thanks
Sarath -
Runtime error for ui element multipane
hello.
i have a question.
i implemented uielement multipane example in wda.
it worked very well in only first trying, but it occured a runtime error -that is Access via 'NULL' object reference not possible.- from second trying.
context -
hd <node>
attribute1 <hd of attribute>
attribute2 <hd of attribute>
item <hd of subnode>
attribute1 <item of attribute>
attribute2 <item of attribute>
below is source.
==========================================================
DATA: node_hd type ref to if_wd_context_node,
node_item type ref to if_wd_context_node,
itab_hd type wd_this->elements_hd,
stru_hd type wd_this->element_hd,
itab_item type wd_this->elements_item,
rt_auart type ref to data,
rt_vbeln type ref to data.
field-symbols: <fs_auart> type table,
<fs_vbeln> type table.
retrieve the data from the select option
rt_auart = wd_this->m_handler->get_range_table_of_sel_field( i_id = 'AUART' ).
assign it to a field symbol
assign rt_auart->* to <fs_auart>.
retrieve the data from the select option
rt_vbeln = wd_this->m_handler->get_range_table_of_sel_field( i_id = 'VBELN' ).
assign it to a field symbol
assign rt_vbeln->* to <fs_vbeln>.
retrieve that data from the database.
Normally it is suggested to encapsulate the data retrieval in a separate class.
For simplicity, the select statement has been implemented here.
select * into corresponding fields of table itab_hd
from vbak
where vbeln in <fs_vbeln>
and auart in <fs_auart>.
bind the data to the context
node_hd = wd_context->get_child_node( name = 'HD' ).
node_hd->bind_table( itab_hd ).
bind the data to the context
loop at itab_hd into stru_hd.
retrieve item_node object each sy-tabix
i could't get item_node object when sy-tabix is 1.
i hope to know why i can't get item_node object when sy-tabix is 1.
node_hd->get_child_node(
exporting
index = sy-tabix
name = 'ITEM'
receiving
child_node = node_item ).
when index = 1
node_item object is null.
why node_item object is null?????
i don't got it.
can sombody explain about it???
because of this matter, i can't acess frist node_item to insert value.
do you have a solving this matter?
select * into corresponding fields of table itab_item
from vbap
where vbeln = stru_hd-vbeln.
node_item->bind_table( itab_item ).
endloop.Hi Regina.
So you say if it is not declared as singleton it is created for each element. But
when I declare my subnode with cardinality 0..1 I face the same problem.
This is what I do:
I bind the elements to the parent node. Afterwards I loop all elements of the parent
node and try to get the subnode with element->get_child_node( ). If cardinality of
the sub node is 0..1 or 0..n the reference is NULL. If cardinality is 1..1 or 1..n the
reference is not initial.
At what step does the frameowrk create the subnode then?
Cheers,
Sascha
Maybe you are looking for
-
how can i see my contacts which i backup it on my PC ? so i go to i cloud and don't see my contact
-
Automatical update of PO quantity when changed in SO
We have a following issue for our regular business we have a third party process for trading goods. So we are using on customer sales order stock. In our system following is possible: We create a sales order and after using of Purchase requisition we
-
Implemention of IFRS on New G/L
Hello, We are planning to implement IFRS with New G/L. what would be the guidelines to do it? I was reading that recommendation is: 1. Migration of New G/L 2. Implementation of IFRS (why?) Can I migrate previous fiscal year to make a comparation with
-
Firewire adapter to USB, correct one
I'm still working on the old G4. We do have in our parts bin a dvd/cdr writer player but it is USB. What specs do I need to look for to use an adapter between the firewire and USB of the drive. Walmart has several on their site but the specs are
-
Dynamic SQL within a SQL Query ?
is there any possibility to do like this ? SELECT table_name, XXXXXXXX('SELECT Count(*) FROM '||table_name) tot_rows FROM dba_tables WHERE owner = 'SCOTT';or any other trick to run dynamic SQL within the SQL Query? Hoping....that it should be. Rega