Tabbing "sticking"

Hello All
The two attached vi's are identical except for one change in the pane
mouse down event frame. The output of the quotient&remainder is
connected to 1) a tab control value property node and 2) a tab control
value(sgnl) property node.
The result is that the vi doesn't perform the way its intended which
is a combination of the both. viz....tab through each page with a pane
mouse down event. When the last page of the tab control is reached the
code in here should work, unless interrupted by a pane mouse down event.
Could somebody please explain to me the different operations happening here, and how to correct it?
Thanks in advance
Attachments:
CIWebDisplayTestOnlyThen Discard.vi ‏23 KB
CIWebDisplayTestOnlyThen Discard1.vi ‏18 KB

Looking once more at your "...discard1.vi", there are still a few things that don't make sense.
I have no idea why you do all these signaling properties on the "boolean", because there is no associated event(!), so it does not make a difference from writing to a plain value property or even a local variable of it. If something needs to get written in virtually all cases, place the code after the events structure. No locals or value properties needed. (I assume the boolean is just a stand-in and that in the real code something more significant happens once page 4 is reached. Right now the boolean is hidden whenever it is off, so we would not know the difference anyway ))
It is really painful to debug a program that has fancy windows and scaling option. I would wait with that until the code is mature. As a last step you could hide the stop button and deal with program shutdown is a customized way. This looks like e.g. a museum display that reverts if unattended for a few minutes, so that long timeout is fine.
You can wire the tab wire directly to a case structure and it will act like an enum. No need for comparisons with diagram constants and such.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
CIWebDisplayTestOnlyThen Discard1MOD.vi ‏12 KB

Similar Messages

Artifacts from previous tab sticking as background of UL on some pages.

I am a website frontend developer. I have a UL on a development site that was fine in all browser testing and FF 7.0.0. When my FF updated to 7.0.1 I noticed a strange color behind the UL menu. The color was actually artifacts from the tab that was open before switching to that site's tab. I can recreate this on multiple machines in the office. The area that is being affected has a black image background. The transparent image on the background of the LI is still transparent but is now laying over the artifact area.
Here is an example screenshot:
http://juggopop.com/wp-content/uploads/2011/10/screenshot-ff-bug.jpg

This Bug occurs with every black (#000) only image on Firefox 7.0.1/ Mac.
Black images are not displayed and these artifacts appear.
See Bug: https://bugzilla.mozilla.org/show_bug.cgi?id=691699

How can I set up an App Tabs for an active site like one of the BBC's radio stations? They turn out to be static and soon out of date.

I have been using an App Tab for static pages within Ancestry. No problem.
But I would like to make an App Tab for one of the radio stations for the BBC network in the UK. (I live in the UK.)
Every time I do so the tab sticks at the time I installed it. No good for listening to current programs 2-3 days later.
Has the introduction of active tabs just arrived with Firefox 5 (which I only installed five minutes ago)?

I agree anti-relay can be using UBE feature. However, there is serious problem in reject the spam mail. My nms is using UBE feature to stop spam mail. According to the work flow of the UBE, the mail is received by nms completely and UBE is going to invesgate the mail address. Although UBE can stop the spam mail, the spam mail have a trouble in returning the mail to the sender. The reason is the sender address is usually not existed in the world. That will cause a lot of mail waiting in the mail queue.
In my experience, do not use UBE for anti-relay.

How to add 4 more tabs in a Work book with conditions?

hi experts,
i have one workbook, it has two tabs,
1st tab has two distribution channels 10 and 20,it has a condition to show inv >= 5000
2nd tab also has same distribution channels and the condition to show inv <= 10.
but what my need is,
i want to insert 4 more tabs, stick to one query for all tabs
tab 1: Dist. Channel 10 inv >=5000$
tab 2: Dist. Channel 10 inv <=10$
tab 3: Dist. Channel 20 inv >=5000
tab 4: Dist. Channel 20 inv <=10.
pl help to do this,
thanks in advance.
venkat

Hi,
All I know is, you have to write Macro's and VBA code for this scenario and it will not be that easy. I can tell you that. We almost had the same situation and but we gave the workbook in different format.
http://help.sap.com/saphelp_bw21c/helpdata/en/f1/0a55f9e09411d2acb90000e829fbfe/frameset.htm
You have to use appropriate function in the above link to achieve this.
Good luck.
Please Assign Points if it helps you.
Regards,
PNK

Safari 5 issue with opening tabs in a new window

Hi all,
As we all know, the easiest way to open a tab in a separate window is to drag it out of the tab bar and release the mouse button to let it appear as a window. I used to do that a lot and I never had a problem until I upgraded to the latest version of Safari 5. Since then, whenever I do so and release the mouse button, the tab sticks to the pointer for a few seconds and then it automatically turns into a window but with a distorted outlook, which only gets fine if I minimise and maximise the window again. I even screen captured this problem. You can watch it here:
http://www.youtube.com/watch?v=VPdlQMzGVNQ
Do you guys have any idea what is causing this problem? Is anyone else having the same experience?
Cheers to all...

HI and welcome to Apple Discussions...
Try troubleshooting the Safari .plist file.
Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
Move the com.apple.Safari.plist file from the Preferences folder to the Desktop.
Relaunch Safari. If Safari functions as it should, move the .plist file to the Trash.
If that didn't help, in a Finder window select your home folder in the Sidebar on the left. Open the Library folder, then the Caches folder, then the com.apple.Safari folder.
Move the cache.db file from the com.apple.Safari folder to the Trash.
Relaunch Safari.
Carolyn

Keeping tabs to a single row

i have many many tabs in my panel. what happens is that when they get to the endof the width of hte panel, they create a second row. what i want to happen is for them to get smaller and slmaller, showingonly part of the name on the tab with a (...) at the end, and a tooltip. mainly i wnat to have the tabs stick to a single row. anyone know how to do this?

You can set the tab layout policy on your tabbed pane to JTabbedPane.SCROLL_TAB_LAYOUT. This will create a scroll bar kind of a thing for your tabs if they don't fit in one run.
You can do this at JTabbedPane construction time by
JTabbedPane tabbedPane = new JTabbedPane(JTabbedPane.TOP, JTabbedPane.SCROLL_TAB_LAYOUT);
or
after creating the JTabbedPane, call
tabbedPane.setTabLayoutPolicy(JTabbedPane.SCROLL_TAB_LAYOUT);
Hope this helps
Sai Pullabhotla.

Why does the new 61XL say it is for PSC 2510 when it doesn't fit??

I have just purchased a new ink cartridge for my PSC 2510, and was advised to get the 61XL (I usually use the 56) which lists on the side that it is compatible with the 2510. However I have just tried to intall it but there is no way that I can get it to fit as the two tabs sticking up at the front go all the way to the sides of the cartridge as opposed to having a gap on each side on the old one, and this stops it from going all the way in, so I can close the tab over it... Can somebody tell me how this is supposed to fit or have I just wasted $50 for nothing???

Hi,
Sorry you bought a wrong cartridge, it is not compatible with your printer PSC 2510 , it is compatible with HP Deskjet 2510 All-in-One Printer. Please check the following list:
http://www8.hp.com/au/en/products/oas/product-detail.html?oid=4024150#!tab=compatible_hosts
PSC and Deskjet are two different lines of printers.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

IPad 2 digitizer replacement problem. Maybe?

Help people. I was replacing an iPad 2 digitizer but during taking it off I tore the power button flex cable so we went ahead and ordered that probably be here tomorrow or Wednesday. Well anyway I decided I'd clean the iPad all up and find how I'd tuck the digitizer cable under the LCD screen. Anyway while doing that there's this little piece with 2 holes that is like a little tab sticking off the digitizer cable. That tore off of the digitizer. I don't know if that part is important or just there or what but can someone please tell me what that little piece is for? This is the 4th iPad I've fixed and never had either of the problems I had with this one. Please tell me what that part does or if its important. I couldn't test the digitizer because no power button flex cable and I don't feel comfortable turning on the iPad with something unplugged from it. I can still plug in the digitizer but this is just a little piece that sticks off from it.

http://www.ifixit.com

Technical User's manual for FW800

Hello everybody. I recently bought a second-hand G4 Dual 1,25 FW800 like new. I wonder if I can find its hardware(technical) user's guide ? I found pdf GigAudio or Ethernet setup not complete enough for my purpose. I have to install à 3d HD, and incidentally I would like to have a complete description of this beautyfull computer.
Have a good evening.
PS I went on Apple Discussions a long time ago for my PM 9600 still running quite well because of you, men ! I'm gratefull.
By the way, I removed the 4 screws of the side panel. Is just in the middle a sort of enclicked plastic "thing" ? I'm afraid to pull.
PM G4 Dual 1,25 FW800 Mac OS X (10.4.5)

It is a piece of cake.
Just understand that anytime you open the case you are risking electrical static discharge which can fry the mother board. Although with the 50+ Macs I have replaces HD's in I have (KNOCK ON WOOD) never had a static discharge. Some of these computers were school computers that we had hundreds of, and I did not care how rough I banged around inside. Sometimes even left everything plugged in and did not even rub the power supply. I even left one running and unpluged the HD. Not a single fried Mac in the 20 years I have been working on Macs.
Unplug everything, open the case discharge static electricity by rubbing the power supply.
Push down on the tab sticking out of the barrette that holds the ATA ribbon. Poof it comes up releasing the cable.
Remove one screw, pull up on the gray lever, push gently up..BOOM the whole case comes out. Unplug everything.
Extra screws are on the HD holder.
Install the HD, set both to slave, unless you are using 3rd party PCI133 card. Put the ribbon on, put the power plugs in.
Line up the three rivets with the three slots and push the case with the HD's in it back down, until it clicks in. Make sure all three rivets got into all three slots, or the hard drives can fall out on to the CPU and kill your computer.
Make suer you place the ribbon into the barrette like fastener and click it back together.
See now that was easier than undoing your girlfriends bra strap.

W530 Bezel popped open

Hi,
last friday, when typing on my 4 1/2 month old W530, the left side of the screen popped open with an audible 'pop'.
Nothing to worry about - I thought - since the plastic piece should click back into place.
But weirdly there is now a metal tab sticking through the gap (see image) with some wiring attached to it (probably antenna). And there is no way to pop that back in ... as the tab does not move a single bit. There is also a little bulge on the back now (I assume it wasn't there before). It feels like the screen assembly has been 'crammed' into the lid in the first place and after a while the stress made the bezel and the assembly pop out.
Has anybody come across this and knows a solution...?
FYI:
The warranty department says it's not covered:
" There are no quality issues known with hinge tongue on W530 machines.
These types of damages are considered as customer induced damages and are not covered by the warranty."
I'm not sure what a hinge 'tongue' is, but the hinge itself isn't anywhere near.
Btw. this is the reply to me after I complained, as the first customer service person did not understand what the problem actually was.
Anyway, I really love the machine, it does what it is supposed to do without any fuzz, it is my first Thinkpad, but probably my last now ... as the warranty department (UK in my case) does not seem to spend more than 2 seconds on a case.
Peer

If the laptop is still under warranty, register a ticket with IBM Electronic Service Call.
https://www-930.ibm.com/support/esc/signin.jsp
You will need to sign up using an e-mail address as the IBM ID. If you bought this laptop as a consumer and not as a business, don't worry. You don't need to be a part of an organization to use this service.
Once you've logged in, go to "Place a Request" and start filling out the page.
Insert 60Y5482 into the Parts Number field. This is an FRU item, not a CRU item, so they will not send one to you to replace/fix yourself.
Insert into the comment that the LCD Front Bezel has popped out, etc. and are requesting maintenance service or something along those lines.
If IBM decides to accept your request, they will either send you a shipping label or send a technician to your home. The former is most likely. In all warranty situations involving shipping, they will offer UPS First Day Air.
Don't attempt to fix it yourself. It is an FRU part, which means it can only be fixed by a technician (according to the warranty)

How do I remove the orange ribbon connector from the airport extreme card.

It's the last thing keeping me from intalling the new card. Does anyone know how to remove it. And why does the new one have a plastic tab sticking out next to the antenna port?

the card inside PB G4 17" is physically different card than the retail card.
retail card has plastic tab to pull it out of the slot of compatible models:
http://docs.info.apple.com/article.html?artnum=107440
card for 17" has a cable built in:
http://www.powerbooktech.com/part,name-Airport-Extreme-Card-for-PowerBook-G4-17, powerbook-aluminum-17.htm

HP Photosmart C5280 Ink carriage will not return

Ink carriage in HP Photosmart C5280 will not return fully to the right position. Looks like a tab sticks up blocking its return.

Hey @pphillips700,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the carriage jam issue that you're experiencing on your HP Officejet 6500 e-All-in-One Printer. However, in order for me to provide you with accurate troubleshooting steps I do need to verify which Officejet 6500 model of printer you have as HP manufacturers several versions:
HP Officejet 6500A e-All-in-One Printer - E710a
HP Officejet 6500A Plus e-All-in-One Printer - E710n
HP Officejet 6500 All-in-One Printer - E709a
HP Officejet 6500 Wireless All-in-One Printer - E709n
HP Officejet 6500 Wireless All-in-One Printer - E709q
Once you determine which Officejet 6500 series printer you have, please click on the HP Support document below for your specific printer to resolve the carriage jam issue.
Carriage Jam displays for HP Officejet 6500A E710a series
Carriage Jam displays for HP Officejet 6500 E709a series
Please let me know if the steps I've provided resolve your carriage jam issues. Good luck! :)
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

KT4VL just died on me

My board was running warm with an amd 1700+ and standard amd fan and heatsink. I bought a new, bigger heat sink and fan, took out the old, replaced with the new (scratched the board a bit in front of the heatsink mounting clasps). Now all 4 d-braket lights are red and the board won't load. Tried another cpu, an AMD duron 1.1 Ghz, same problem. 4 red d-bracket lights.
Did I kill the motherboard? ?( ?(

Sorry about your MB.
Next time:
1) Take the MB out the case to swap out the heat sink. Another method would be to remove the PS to give you more room if you choose to keep the MB in the case. Not my 1st choice.
2) Use a nut driver to push the heat sink clip onto the processor socket. It will secure on the little tab sticking up. This will prevent any slippage you typically encounter when attempting to secure the clips using a screw driver.
Most computer store sell PC tool kits for less than $10 U.S. that will contain basic nut drivers. A small investment that will save a lot of wasted time and money.
Make sure you apply the thermal grease correctly. There are several threads on the MSI forum that explain the best method. Spend the extra money on one of the silver varieties.
Good luck on your next attempt.

Fox4 says that it PREVENTs the user from having two tabs open to the same URL. There are times when I WANT multiple open tabs! Can I override this? (Please tell me. If I can't, then I don't want Fox4. I'll stick with 3.x and NoScript.) Thanks.

Tell me EXACTLY how to FORCE Fox4 to allow me to have MORE THAN ONE tab open to any given web page.
Otherwise, I have to stick with Fox3.
Precise details, please. Thanks.

# Open a new tab - Ctrl + t
# Start typing the URL in the awesome bar. The page should displayed in the list below with "Swtich to Tab" written under it
# Scroll down to the URL in the list using the down arrow key and hit Alt + Enter.
The webpage is opened a second time instead of simply switching to it. Simple.

What is the little golden coloured metal tab that sticks out the side of the logic board?

Hi,
On the logic board of a 3g and 3gs (i am not sure about the other models) there is a golden coloured tab that sticks out and when the board is in the housing it makes contact with the chrome bezel.
I was wondering what the job of this little part is and what the implications would be if it did not do its job properly.
Thanks

Just be sure no extra parts are left over when you re-assemble it..... as KT said this question goes way, way beyond any guidance than can be offered at this location.

Tabbing "sticking"

Similar Messages

Maybe you are looking for