Table BUT000 error in DDIC - Check table with SE14

Hi Experts,
When I import the sap_all profile to a new SAP BI 7 installation, i get the message
Table BUT000 error in DDIC - Check table with SE14
Is it a serious problem or I can continue using this BI platform?
Regards
Obayd

HI,
This is some wat not that much a general problem any way Have a look at the SAP Note 1276895 - Add. info. about Upgrading to SAP Solution Manager 7.0 EHP1 and
SAP Note 1169247 - Enhancements to Solution Manager 7.0 EHP1 upgrade.
thanks,
karthik

Similar Messages

Error: Table /1FB/MD___M8001X error in DDIC - Check table with SE14

Hi Buddy,
I have some trouble with copy client 000 to 400, Error: Table /1FB/MD___M8001X error in DDIC - Check table with SE14.
TABL /1FB/MD___M8001X was not activated
Check table /1FB/MD___M8001X (MST.EKA/14.04.11/10:33)
POSITION is a reserved word (Select another field name)
Field name MANDT can be provided in this system. Please do not use.
Field name SID can be provided in this system. Please do not use.
Field name TABNAME can be provided in this system. Please do not use.
Field name FIELDNAME can be provided in this system. Please do not use.
Field name AS4LOCAL can be provided in this system. Please do not use.
Field name AS4VERS can be provided in this system. Please do not use.
Field name POSITION can be provided in this system. Please do not use.
Index /1FB/MD___M8001X-01 is not in the customer namespace
Table /1FB/MD___M8001X must be created in the database
Check on table /1FB/MD___M8001X resulted in errors
how to solve this problem...??
Thanks & Regards
Eka Sumargo

Hi MST Support
Are there any other errors in SCC3. What kind of client copy you're performing SAP_ALL or CUST?
As per the logs in your post it seems that the table MD___M8001X does not exist in the database.You could try SE11 or SE14 to check the table.
Any other info would be really helpful.
Regards,

Error: Table /1FB/MD___M8006P error in DDIC - Check table with SE14

Hi Friends,
I've a problem related to the activation table, if I want to activated always problematic because there are fields POSITION, there are errors like this view :
Activation of worklist (MST.EKA / 15.04.2011 / 11:20:59 /)
=========================================================================
Technical log for mass activation
See log XXX 20110415112056:ACT
TABL /1FB/MD___M8006P was not activated
Check table /1FB/MD___M8006P (XXX/15.04.11/11:20)
POSITION is a reserved word (Select another field name)
Field name MANDT can be provided in this system. Please do not use.
Field name SID can be provided in this system. Please do not use.
Field name TABNAME can be provided in this system. Please do not use.
Field name FIELDNAME can be provided in this system. Please do not use.
Field name AS4LOCAL can be provided in this system. Please do not use.
Field name AS4VERS can be provided in this system. Please do not use.
Field name POSITION can be provided in this system. Please do not use.
Index /1FB/MD___M8006P-01 is not in the customer namespace
Table /1FB/MD___M8006P must be created in the database
Check on table /1FB/MD___M8006P resulted in errors
=========================================================================
End of activation of worklist
please guide what must I do ... ??
Thanks
Eka Sumargo

Hi Eka,
the acticvation will not work because of the existence of the field POSITION
"POSITION is a reserved word"
POSITION is a reserved word; these reserved words are stored in table
TRESE, and the reason should be there also.
You will have to change the field name for the activation to complete.
Kind regards,
Paul

Client copy error in DDIC

Hi Gurus;
I have done a local client copying .
The client copying has been completed successfully but the logs are showing the below errors.
Start analysis of system 00:23:01
Error: Table /1FB/MD___2S0001 error in DDIC - Check table with SE14
The data object could not be created: The type /1F B/MD___2S0001 does not exist.
Error: Table /1FB/MD___2S0002 error in DDIC - Check table with SE14
The data object could not be created: The type /1F B/MD___2S0002 does not exist.
Error: Table /1FB/MD___2S0003 error in DDIC - Check table with SE14
The data object could not be created: The type /1F B/MD___2S0003 does not exist.
Error: Table /1FB/MD___2S0004 error in DDIC - Check table with SE14
The data object could not be created: The type /1F B/MD___2S0004 does not exist.
Error: Table /1FB/MD___2S0005 error in DDIC - Check table with SE14
The data object could not be created: The type /1F B/MD___2S0005 does not exist.
Error: Table /1FB/MD___2S0006 error in DDIC - Check table with SE14
The data object could not be created: The type /1F B/MD___2S0006 does not exist.
Error: Table /1FB/MD___2S0007 error in DDIC - Check table with SE14
The data object could not be created: The type /1F B/MD___2S0007 does not exist.
Error: Table /1FB/MD___2S0008 error in DDIC - Check table with SE14
The data object could not be created: The type /1F B/MD___2S0008 does not exist.
Error: Table /1FB/MD___2S0009 error in DDIC - Check table with SE14
The data object could not be created: The type /1F B/MD___2S0009 does not exist.
Error: Table /1FB/MD___2S000A error in DDIC - Check table with SE14
The data object could not be created: The type /1F B/MD___2S000A does not exist.
Error: Table /1FB/MD___2S000B error in DDIC - Check table with SE14
The data object could not be created: The type /1F B/MD___2S000B does not exist.
Error: Table /1FB/MD___2S000C error in DDIC - Check table with SE14
The data object could not be created: The type /1F B/MD___2S000C does not exist.
Error: Table /1FB/MD___2S000D error in DDIC - Check table with SE14
The data object could not be created: The type /1F B/MD___2S000D does not exist.
Error: Table /1FB/MD___2S000E error in DDIC - Check table with SE14
The data object could not be created: The type /1F B/MD___2S000E does not exist.
Error: Table /1FB/MD___2S000F error in DDIC - Check table with SE14
The data object could not be created: The type /1F B/MD___2S000F does not exist.
Error: Table /1FB/MD___2S000G error in DDIC - Check table with SE14
The data object could not be created: The type /1F B/MD___2S000G does not exist.
Error: Table /1FB/MD___2S000H error in DDIC - Check table with SE14
The data object could not be created: The type /1F B/MD___2S000H does not exist.
What does this mean ...
how can i resolve these errors.
Thanks in advance

Hi,
From the error messages and the namespace, it looks like an issue with FINBASIS component. Check OSS note 844615. If that is applicable, you can ignore these errors.
Siva

SRM MDM, Error, "Table with Code 'null' does not exist in repository"

Hi experts,
We has SRM MDM scenario, while doing OCI settings, we are able to connect with MDM repository but getting follwoing error message in portal, "java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema"
Can You please suggest,
Thanks and Regards,
Munish

Hi everyone,
Sudhanshu and Anshuk:- Thanks for your response, let me try and explain the real scenario in details:-
We have deployed the SRM-MDM Catalog Search UI in Portal.
We tried accessing the http://<Portal Host>:<Portal Port>/SRM-MDM/SRM_MDM
Then we got a screen (Search UI App screen), where in we have provided the MDM Server name, then the MDM Server Password, then presses the Connect button, then below this, it displayed the Repository name created in the MDM. We have selected the Repository, then provided the Credentials of a User (Name: T_CORP) in MDM which has "Catalog Manager", and the "UI Configuration Manager" Roles. Please note that these Role names were created by us in MDM. Is it the right procedure or do we have any standard Roles delivered by SAP in MDM to map? If any standard Roles are available, where we need to check these.
Once the Credentials of MDM User is provided, and then selected the "Login" button.
Then we are getting the below error.
"java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema"
Please clarify; we are not configuring any values in iViews. Where we need to do this, I mean name of the iView, and what values do we need provide generally? We are just running the Search UI App application; I don't think it is an iView, because the URL shows the Application name details, etc...
Please guide us, how to fix this Error.
Thanks and Regards,
Munish

No data found error on Form on a Table with report

Hi Everyone, I'm using Application Express 4.1.0.00.32 on Windows 7. I built a Form on a table with report. Earlier I was using rowid as a passing parameter but then I had to change it to primary key column from report to form.
So in the "Fetch row process" I changed the "Items containing primary key value" and "Primary Key column" to P1004_PERSON_ID and PERSON_ID respectively. Which is my primary key.
My Form is working exactly fine but at on point it throws "no data found error".
I have a required date field in the form. So if the user doesn't fill in the date field and try to save the form, it throws the "Feild required error" and then when user enters date and try to save then it throws the error "No data found.". here is the snapshot... snapshot
How can I fix this error.I'm really stuck.
I checked debubber..it is as follows... in debughger it's still showing rowid. I don't know why. How can I fix that.
Execution
Message
Level
Graph
0.00233
0.00932
S H O W: application="101" page="1004" workspace="" request="" session="123235901404364"
4
0.01161
0.00102
Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
4
0.01261
0.00046
alter session set nls_language="AMERICAN"
4
0.01307
0.00042
alter session set nls_territory="AMERICA"
4
0.01348
0.00053
NLS: CSV charset=WE8MSWIN1252
4
0.01401
0.00042
...NLS: Set Decimal separator="."
4
0.01443
0.00053
...NLS: Set NLS Group separator=","
4
0.01495
0.00050
...NLS: Set g_nls_date_format="DD-MON-RR"
4
0.01545
0.00051
...NLS: Set g_nls_timestamp_format="DD-MON-RR HH.MI.SSXFF AM"
4
0.01597
0.00050
...NLS: Set g_nls_timestamp_tz_format="DD-MON-RR HH.MI.SSXFF AM TZR"
4
0.01647
0.00079
...Setting session time_zone to -05:00
4
0.01726
0.00046
Setting NLS_DATE_FORMAT to application date format: DD-MON-YYYY
4
0.01772
0.00060
Setting NLS_TIMESTAMP_FORMAT to application timestamp format: DD-MON-YYYY HH24.MI.SSXFF
4
0.01832
0.00092
...NLS: Set g_nls_date_format="DD-MON-YYYY"
4
0.01924
0.00049
...NLS: Set g_nls_timestamp_format="DD-MON-YYYY HH24.MI.SSXFF"
4
0.01973
0.00083
...NLS: Set g_nls_timestamp_tz_format="DD-MON-RR HH.MI.SSXFF AM TZR"
4
0.02056
0.00099
NLS: Language=en-us
4
0.02154
0.00157
Application 101, Authentication: PLUGIN, Page Template: 5091946581246503
4
0.02312
0.00065
...fetch session state from database
4
0.02377
0.00106
fetch items
4
0.02483
0.00065
...fetched 103 session state items
4
0.02548
0.00194
Authentication check: NTLM (NATIVE_CUSTOM)
4
0.02742
0.00188
...Execute Statement: begin declare begin wwv_flow.g_boolean := f_ntlm_page_sentry_parm; end; end;
4
0.02930
0.00050
... sentry+verification success
4
0.02980
0.00042
...Session ID 123235901404364 can be used
4
0.03021
0.00114
...Application session: 123235901404364, user=VARMAN01
4
0.03135
0.00162
...Check for session expiration:
4
0.03297
0.00075
Session: Fetch session header information
4
0.03372
0.00113
...Setting session time_zone to -5:00
4
0.03485
0.00080
Branch point: Before Header
4
0.03565
0.00598
Fetch application meta data
4
0.04165
0.00081
...metadata, fetch computations
4
0.04245
0.00076
...metadata, fetch buttons
4
0.04321
0.00086
Setting NLS_DATE_FORMAT to application date format: DD-MON-YYYY
4
0.04406
0.00058
Setting NLS_TIMESTAMP_FORMAT to application timestamp format: DD-MON-YYYY HH24.MI.SSXFF
4
0.04464
0.00049

Just an observance... SQL is still showing the rowid instead of the P1004_PERSON_ID ??
where "PERSON_ID" = :p_rowid;
should it not be :
where "PERSON_ID" = :P1004_PERSON_ID:
thx, Bill

How can I check if there is a table with the given name ?

I'm using 8i and 9i.
Could anybody teach me how to check if there is a table with a certain name in SQLPLUS without using SELECT
statement ?
I want to use the following logical procedure.
if exists "table_to_be_deleted" then drop table "table_to_be_deleted"
Or, is there any system table that I can check the names of tables like
count = select "table_to_be_deleted" from "an_oracle_system_table"
if ( count != 0 ) then drop table "table_to_be_deleted"
Thanks,
John

Just create it, but be aware that DDLs can't be executed directly from Pl/Sql, so you'll have to use dynamic Sql, e.g. :
SQL> create table test(a number);
Table created.
SQL> begin
2 drop table test;
3 exception
4 when others then
5 null;
6 end;
SQL> /
drop table test;
ERROR at line 2:
ORA-06550: line 2, column 1:
PLS-00103: Encountered the symbol "DROP" when expecting one of the following:
begin case declare exit for goto if loop mod null pragma
raise return select update while with <an identifier>
<a double-quoted delimited-identifier> <a bind variable> <<
close current delete fetch lock insert open rollback
savepoint set sql execute commit forall merge pipe
SQL> ed
Wrote file afiedt.buf
1 begin
2 execute immediate 'drop table test';
3 exception
4 when others then
5 null;
6* end;
SQL> /
PL/SQL procedure successfully completed.
SQL>Now the table does not exist anymore, but further executions will not generate errors, due to the exception handler :
SQL> desc test
ERROR:
ORA-04043: object test does not exist
SQL> /
PL/SQL procedure successfully completed.
SQL>

Error when inserting in a table with an identity column

Hi,
I am new to Oracle SOA suite and ESB.
I have been through the Oracle training and have worked for about 2 months with the tooling.
We have a Database adabter that inserts data in 5 Tables with relations to each other.
Each table has his own not NULL Identity column.
When running/ testing the ESB service we get the error at the end of this post.
From this we learned that the Database adapter inserts the value NULL in the identity column.
We cannot find in the documentation how to get the database adabter to skip this first column and ignore it.
Is this possible within the wizard? Our impression is no
Is this possible somwhere else/
And if so How can we do this?
If anyone can help it would be greatly appreciated
Pepijn
Generic error.
oracle.tip.esb.server.common.exceptions.BusinessEventRejectionException: An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: esb:///ESB_Projects/GVB_PDI_PDI_Wegschrijven_Medewerkergegevens/testurv.wsdl [ testurv_ptt::insert(VastAdresCollection) ] - WSIF JCA Execute of operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception.
insert failed. Descriptor name: [testurv.VastAdres]. [Caused by: Cannot insert explicit value for identity column in table 'VastAdres' when IDENTITY_INSERT is set to OFF.]
; nested exception is:
ORABPEL-11616
DBWriteInteractionSpec Execute Failed Exception.
insert failed. Descriptor name: [testurv.VastAdres]. [Caused by: Cannot insert explicit value for identity column in table 'VastAdres' when IDENTITY_INSERT is set to OFF.]
Caused by Uitzondering [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.3.0) (Build 070608)): oracle.toplink.exceptions.DatabaseException
Interne uitzondering: com.microsoft.sqlserver.jdbc.SQLServerException: Cannot insert explicit value for identity column in table 'VastAdres' when IDENTITY_INSERT is set to OFF.Foutcode: 544
Call:INSERT INTO dbo.VastAdres (ID, BeginDatum, Einddatum, Land, Plaats, Postcode, VolAdres) VALUES (?, ?, ?, ?, ?, ?, ?)
bind => [null, 1894-06-24 00:00:00.0, 1872-09-04 00:00:00.0, Nederland, Wijdewormer, 1456 NR, Oosterdwarsweg 8]
Query:InsertObjectQuery(<VastAdres null />).

Hi,
Click on the resources tab in the ESB system/ Project to see the ESB system design and all the components in it.
Click on the Database adapter that you want to edit..and make the necesary changes..
Check this link.
http://download-uk.oracle.com/docs/cd/B31017_01/core.1013/b28764/esb008.htm for "6.8.2 How to Modify Adapter Services" section.
If you are calling a database procedure which inturn makes the insert, you will have to make changes in the database and you job would be much simpler. It seems there are limitations on what you can change in the Database adapter once it is created. Please check the link for further details.
Thanks,
Rajesh

Error inserting a row into a table with identity column using cfgrid on change

I got an error on trying to insert a row into a table with identity column using cfgrid on change see below
also i would like to use cfstoreproc instead of cfquery but which argument i need to pass and how to use it usually i use stored procedure
update table (xxx,xxx,xxx)
values (uu,uuu,uu)
     My component

    <cffunction name="cfn_MediaType_Update" access="remote">
        <cfargument name="gridaction" type="string" required="yes">
        <cfargument name="gridrow" type="struct" required="yes">
        <cfargument name="gridchanged" type="struct" required="yes">
        
        <cfset var colname="">
        <cfset var value="">
        
        <cfswitch expression="#ARGUMENTS.gridaction#">
            
            <cfcase value="U">
                
                <cfset colname=StructKeyList(ARGUMENTS.gridchanged)>
                <cfset value=ARGUMENTS.gridchanged[colname]>
                
                <cfquery datasource="#application.dsn#">
                UPDATE SP.MediaType
                SET #colname# = '#value#'
                WHERE MediaTypeID = #ARGUMENTS.gridrow.MediaTypeID#
                </cfquery>
            </cfcase>
            
            <cfcase value="D">
                
                <cfquery datasource="#application.dsn#">
                update SP.MediaType
                set Deleted=1
                WHERE MediaTypeID = #ARGUMENTS.gridrow.MediaTypeID#
                </cfquery>
            </cfcase>
            <cfcase value="I">
                
                <cfset colname=StructKeyList(ARGUMENTS.gridchanged)>
                <cfset value=ARGUMENTS.gridchanged[colname]>
                
               <cfquery datasource="#application.dsn#">
                insert into SP.MediaType (#colname#)
                Values ('#value#')
                </cfquery>
            </cfcase>
        </cfswitch>
    </cffunction>
my table
mediatype:
mediatypeid primary key,identity
mediatypename
my code is
<cfform method="post" name="GridExampleForm">
        <cfgrid format="html" name="grid_Tables2" pagesize="3" selectmode="edit" width="800px"
        delete="yes"
        insert="yes"
            bind="cfc:sp3.testing.MediaType.cfn_MediaType_All
                                                            ({cfgridpage},{cfgridpagesize},{cfgridsortcolumn},{cfgridsortdirection})"
              onchange="cfc:sp3.testing.MediaType.cfn_MediaType_Update({cfgridaction},
                                            {cfgridrow},
                                            {cfgridchanged})">
            <cfgridcolumn name="MediaTypeID" header="ID" display="no"/>
            <cfgridcolumn name="MediaTypeName" header="Media Type" />
        </cfgrid>
</cfform>
on insert I get the following error message ajax logging error message
http: Error invoking xxxxxxx/MediaType.cfc : Element '' is undefined in a CFML structure referenced as part of an expression.
{"gridaction":"I","gridrow":{"MEDIATYPEID":"","MEDIATYPENAME":"uuuuuu","CFGRIDROWINDEX":4} ,"gridchanged":{}}
Thanks

Is this with the Travel database or another database?
If it's another database then make sure your columns
allow nulls. To check this in the Server Navigator, expand
your DataSource down to the column.
Select the column and view the Is Nullable property
in the Property Sheet
If still no luck, check out a tutorial, like Performing Inserts, ...
http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/index.jsp
John

Runtime error in Dynamic internal table with AMOUNT and Quantity Fields..

Dear friends,
I am attempting write a dymanic Select Statement (with joins).
And the sleect query looks like this..
SELECT (LT_SEL_LIST)
INTO CORRESPONDING FIELDS OF
TABLE <DYN_TABLE>
FROM (LT_FROM_LIST)
WHERE (LT_WHERE3).
Here the into table is a dynamically created internal table..
which is created by ...this
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
    EXPORTING
      IT_FIELDCATALOG = IT_OUTPUT2[]
    IMPORTING
      EP_TABLE        = DY_TABLE.
the it_output2 contains the the fieldcatlog information of dynamically given fields :-
like:-
       TABNAME
       FIELDNAME
       DATATYPE
       LENG
       INTTYPE
       ROLLNAME
       DECIMALS
       REFTABLE
       REFFIELD
i mean the internal table is constructed with reference to all the bove metadata.
Problem:- This query run fine with all the fields Except AMOUNT AND QUANTITY fields....
When the selection list contain VBAK-NETWR or MSEG-MENGE..It throws a runtime error.
"The data read during a SLECT access couldnt be inserted into the target field,either conversion is not supported for
the target field's type or the target field is too short."
after this I even tried to construct the dynamic table with CFILEDNAME and QFIELDNAME in the Fieldcatalog.
so now my fieldcatlog looks like this:---
LOOP AT IT_DD03L..
IF IT_DD03L-DATATYPE = 'CURR'.
       TABLEFIELD-CFIELDNAME = IT_DD03L-FIELDNAME .
       ENDIF.
   IF IT_FIELDCAT3-DATATYPE = 'QUAN'.
       TABLEFIELD-QFIELDNAME = IT_DD03L-FIELDNAME .
ENDIF.
       TABLEFIELD-TABNAME     = IT_DD03L-TABNAME.
       TABLEFIELD-FIELDNAME   = IT_DD03L-FIELDNAME.
       TABLEFIELD-DATATYPE    = IT_DD03L-DATATYPE.
       TABLEFIELD-INTLEN      = IT_DD03L-LENG.
       TABLEFIELD-INTTYPE     = IT_DD03L-INTTYPE .
       TABLEFIELD-ROLLNAME    = IT_DD03L-ROLLNAME.
       TABLEFIELD-DECIMALS    = IT_DD03L-DECIMALS.
       TABLEFIELD-REF_TABLE   = IT_DD03L-REFTABLE.
       TABLEFIELD-REF_FIELD   = IT_DD03L-REFFIELD.
APPEND TABLEFIELD.
CLEAR TABLEFIELD.
ENDLOOP.
Note:- this is a test code so ignore performance issues...
Please help me with some code ...to avoid the Runtime erorr.
Thanks,
jeevan.

Hi Jeevan,
Why are moving only few fields from DD03L table to your field catalog? Why don't you use move-corresponding? The following code works for me in ECC6.0.
data: it_dd03l type table of dd03l initial size 0,
      ls_dd03l type dd03l,
      lt_fldcat TYPE lvc_t_fcat,
      ls_fldcat TYPE lvc_s_fcat,
      ls_where(72) TYPE c,
      lt_where LIKE TABLE OF ls_where,
      lt_fld LIKE TABLE OF ls_where,
      lt_data_dy TYPE REF TO data.
field-symbols: <ft_data> TYPE STANDARD TABLE.
select * into table it_dd03l from dd03l
    where tabname = 'VBAK'
      and ( fieldname = 'VBELN' or fieldname = 'NETWR' ).
check sy-subrc eq 0.
loop at it_dd03l into ls_dd03l.
move-corresponding ls_dd03l to ls_fldcat.
append ls_fldcat to lt_fldcat.
move ls_dd03l-fieldname to ls_where.
append ls_where to lt_fld.
if ls_dd03l-fieldname = 'VBELN'.
    clear ls_where.
    concatenate ls_dd03l-fieldname ' <> ''''' into ls_where.
    append ls_where to lt_where.
endif.
endloop.
check not lt_fldcat is initial.
CALL METHOD cl_alv_table_create=>create_dynamic_table
      EXPORTING
        it_fieldcatalog           = lt_fldcat
      IMPORTING
        ep_table                  = lt_data_dy
      EXCEPTIONS
        generate_subpool_dir_full = 1
        OTHERS                    = 2.
    IF sy-subrc <> 0.
      RAISE no_configuration_data.
    ENDIF.
    ASSIGN lt_data_dy->* TO <ft_data>.
check sy-subrc eq 0.
select (lt_fld) from VBAK into corresponding fields of table
    <ft_data>
    where (lt_where).
Thanks
Bala

How to create an dynamic internal table with the structure of a ddic table

Hi all,
I want to fill ddic-tables (which I already created) in my abap dictionary with data out of CSV-files (which are located on the CRM-Server). The ddic tables have different amount of fields.
I started with creating a table which contains the name of the tables and the path to the matching CSV-file.
At the beginning I'm filling an internal table with part of this data (the name of the ddic-tables) - after that I am looping at this internal table.
LOOP AT lt_struc ASSIGNING <lfs_struc>.
     LOOP AT lv_itab1 INTO lv_wa1 WHERE ztab_name = <lfs_struc>.
     lv_feld = lv_wa1-zdat_name.
    ENDLOOP.
    CONCATENATE 'C:\-tmp\Exportierte Tabellen\' lv_feld INTO lv_pfad.
    Do.
    OPEN DATASET lv_pfad FOR INPUT IN TEXT MODE ENCODING NON-UNICODE IGNORING CONVERSION ERRORS.
    READ DATASET lv_pfad INTO lv_rec.
    IF sy-subrc NE 0.
      EXIT.
    ENDIF.
    enddo.
    REPLACE ALL OCCURRENCES OF '"' IN lv_rec WITH ''.
    SPLIT lv_rec AT ';' INTO TABLE lt_str_values.
    INSERT into (<lfs_struc>) values lr_str_value.
    CLOSE DATASET lv_pfad.
endloop.
This is not the whole code, but it's working until
SPLIT lv_rec AT ';' INTO TABLE lt_str_values.
I want to split all the data of lv_rec into an internal table which has the structure of the current ddic-table, but I didn't find out how to do give the internal table the structure of the ddic-table. In the code I used an internal tyble type string but I should be the structure of the matching tabel.
If I try to create an internal table by using a fiel symbol, I am told, that the data types are not matching.
Has anyone an idea?

Hi Mayari,
though you were successfull with
METHOD cl_alv_table_create=>create_dynamic_table
I must warn you not to use it. The reason is that the number of tables created is limited, the method uses GENERATE SUBROUTINE statement and this triggers an unwanted database commit.
If you know the DDIC structure, it is (starting with ECC6.0) much easier:
field-symbols:
<table> type standard table.
data:
lr_data type ref to data.
Create data lr_data type table of (<DDIC structure>).
assign lr_data->* to <table>.
The split code can be simplified gaining speed loosing complexity not loosing functionality.
field-symbols:<fs_s> type any.
field-symbols:<fs_t> type any.
SPLIT lv_rec AT ';' INTO table it_string.
loop at it_string assigning <fs_s>.
assign component sy-tabix of wa_string to <fs_t>.
if sy-subrc = 0.
<fs_t> = <fs_s>.
endif.
at last.
append <fs_itwa3> to <ft_itab3>.
endat.
endloop.
Though it may work as Keshav.T suggested, there is no need to do that way.
Regards,
Clemens

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
The SQL Server Analysis Server is 2012 SP1

Hi RB_ORIPW,
The table with name of 'XXX' doesn't exist.
An error occurred when loading the model(Micorsoft.AnalysisServices)
If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
http://support.microsoft.com/kb/2897263/en-us
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Error transport condition table with SCC1

Hi,
I have an error message when i transport my request of new condition table from client 100 to 200 with SCC1.
The error message is :
Program ended with error or warning, return code: 4
Message no. TA146
Log Message in SCC3
Target Client           200
Source Client          100
Copy Type               Copy by Transport Request
Transport Request       DRTK900766
Status                  Completed w. Dictionary Errors
Statistics for this Run
- No. of Tables                 0 of        14
- Lines in Old Objects          0
- Lines in New Objects          0
Warnings and Errors
Table           Component Package
T681            SD-MD-CM   Table Cross-Client
T681E          SD-MD-CM   Table Cross-Client
T681S         SD-MD-CM   Table Cross-Client
T681T         SD-MD-CM   Table Cross-Client
T682           SD-MD-CM   Table Cross-Client
T682I          SD-MD-CM   Table Cross-Client
T682T         SD-MD-CM   Table Cross-Client
T682Z        SD-MD-CM   Table Cross-Client
TMC1         LO-LIS-DC Table Cross-Client
TMC1D        LO-LIS-DC Table Cross-Client
TMC1K        LO-LIS-DC Table Cross-Client
TMC1T        LO-LIS-DC Table Cross-Client
TMC73        LO-LIS-REP Table Cross-Client
TMC74        LO-LIS-REP Table Cross-Client
But i have checked all table above, my new condition table have been added on it. when i transport again, error message is same. Any solution of this ?
Thanks,
Toktok.

hi ,
Please check all tables whether they are active .
also check any data element or domain created is active   .
and then transport request .
Regards
Deepak.

Error while running spatial queries on a table with more than one geometry.

Hello,
I'm using GeoServer with Oracle Spatial database, and this is a second time I run into some problems because we use tables with more than one geometry.
When GeoServer renders objects with more than one geometry on the map, it creates a query where it asks for objects which one of the two geometries interacts with the query window. This type of query always fails with "End of TNS data channel" error.
We are running Oracle Standard 11.1.0.7.0.
Here is a small script to demonstrate the error. Could anyone confirm that they also have this type of error? Or suggest a fix?
What this script does:
1. Create table object1 with two geometry columns, geom1, geom2.
2. Create metadata (projected coordinate system).
3. Insert a row.
4. Create spacial indices on both columns.
5. Run a SDO_RELATE query on one column. Everything is fine.
6. Run a SDO_RELATE query on both columns. ERROR: "End of TNS data channel"
7. Clean.
CREATE TABLE object1
id NUMBER PRIMARY KEY,
geom1 SDO_GEOMETRY,
geom2 SDO_GEOMETRY
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM1',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM2',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO object1 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(550000, 450000, NULL), NULL, NULL));
CREATE INDEX object1_geom1_sidx ON object1(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
CREATE INDEX object1_geom2_sidx ON object1(geom2) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE' OR
SDO_RELATE("GEOM2", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
DELETE FROM user_sdo_geom_metadata WHERE table_name = 'OBJECT1';
DROP INDEX object1_geom1_sidx;
DROP INDEX object1_geom2_sidx;
DROP TABLE object1;
Thanks for help.

This error appears in GeoServer and SQLPLUS.
I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
Anyone knows what could cause an error like this "End of TNS data channel"?

Error while importing a table with BLOB column

Hi,
I am having a table with BLOB column. When I export such a table it gets exported correctly, but when I import the same in different schema having different tablespace it throws error
IMP-00017: following statement failed with ORACLE error 959:
"CREATE TABLE "CMM_PARTY_DOC" ("PDOC_DOC_ID" VARCHAR2(10), "PDOC_PTY_ID" VAR"
"CHAR2(10), "PDOC_DOCDTL_ID" VARCHAR2(10), "PDOC_DOC_DESC" VARCHAR2(100), "P"
"DOC_DOC_DTL_DESC" VARCHAR2(100), "PDOC_RCVD_YN" VARCHAR2(1), "PDOC_UPLOAD_D"
"ATA" BLOB, "PDOC_UPD_USER" VARCHAR2(10), "PDOC_UPD_DATE" DATE, "PDOC_CRE_US"
"ER" VARCHAR2(10) NOT NULL ENABLE, "PDOC_CRE_DATE" DATE NOT NULL ENABLE) PC"
"TFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS"
" 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "TS_AGIMSAPPOLOLIVE030"
"4" LOGGING NOCOMPRESS LOB ("PDOC_UPLOAD_DATA") STORE AS (TABLESPACE "TS_AG"
"IMSAPPOLOLIVE0304" ENABLE STORAGE IN ROW CHUNK 8192 PCTVERSION 10 NOCACHE L"
"OGGING STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEF"
"AULT))"
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'TS_AGIMSAPPOLOLIVE0304' does not exist
I used the import command as follows :
imp <user/pwd@conn> file=<dmpfile.dmp> fromuser=<fromuser> touser=<touser> log=<logfile.log>
What can I do so that this table gets imported correctly?
Also tell me "whether the BLOB is stored in different tablespace than the default tablespace of the user?"
Thanks in advance.

Hello,
U can either
1) create a tablespace with the same name in destination where you are trying to import.
2) get the ddl of the table, modify the tablespace name to reflect the existing tablespace name in destination and run the ddl in the destination database, and run your import command with option ignore=y--> which will ignore all the create errors.
Regards,
Vinay

Table BUT000 error in DDIC - Check table with SE14

Similar Messages

Maybe you are looking for