Table Control Icon appearing in Personal Data in ESS in Portal

Hello All,
We are on SAP Enterprise Portal 6.0 SPS09 with version details as
J2EE Engine 6.40 PatchLevel 87289.311
Portal 6.0.9.0.0
After installation of Portal system we installed Business Package for
Employee Self-Service 4.6C - 4.7 on our Portal system and installed ITS
6.20 patch 22 over Portal inorder for connecting Portal with Backend R/3 system.Ours is a development serverand Portal application and ITS are installed
on the same server.
When we access ESS on Portal ,and navigate to Personal Information /Personal Data / , there a small table control icon appears which we donot want to appear and which does not appear on R/3 side.Simultaneously for this transaction in R3 a selection row appears which doesnot appear in Portal.This problem is given even when we run ESS transactions through ITS on webgui.Wt might be the cause of this error ,do we need to make any settings ( Table specific) in ITS or R/3 or somewhere else. Kindly plz suggest.Plz revert at earliest.My email Id is [email protected] .
Regards,
Saumya

Hi Somya,
Did you solved this problem. If you solved this issue then please let me know because iam also getting the same problem. you can send me an email at [email protected]
Thanks,
Abdul Hadi.

Similar Messages

How to remove the "table control" icon in ITS based ESS screen

Hi All,
I have upgraded my external ITS 620 to patch level 28. Earlier we were on patch 04.
Since then I am seeing the table control in my ESS screens (ITS Based),
In some thread i got to know that the table control is totally redefined / modified from patch 22 of ITS.
Is it possible that we can remove / hide the table control from the screens.
I dont want to let the users access the "Table Settings" screen at all....can u plz tell me how to do it
regards,
PK

we could not remove the table control...it seems like we can not remove it as the table control also appears in the r3 screens also..

How to Copy Personal data from ESS to Reference Personel Numbers

When users with multiple personel numbers (employees with multiple contracts) change bank data address data or personal data in ESS, the data is not copied to the reference personel numbers. Whilst, if the data is changed in R/3 al data is copied properly to the reference pers. numbers.
Is there a switch or a customizing setting to enable this for ESS?
joost
Edited by: J. Weemhoff on Jul 17, 2008 2:01 PM

When users with multiple personel numbers (employees with multiple contracts) change bank data address data or personal data in ESS, the data is not copied to the reference personel numbers. Whilst, if the data is changed in R/3 al data is copied properly to the reference pers. numbers.
Is there a switch or a customizing setting to enable this for ESS?
joost
Edited by: J. Weemhoff on Jul 17, 2008 2:01 PM

Module pool in table control how to add the data

Hi
I have created the table contrl.
In table control editable rows, when ever i have enter the data than save it will update the data in data base.
in table control 4 fields like
sales number,sales director,sales manager,sales hirarchy.
in three fields or editable
first field or non editable only for numaric values disply.
that way i have entered three fields.
first field automatically reganarate heighest value +1.
like that automatically reganarate.
whn ever enter the new vaule
first field autogenarate remaining i will enter the data.after save it will update the data in database.
can u tell me logic for this.

Hi Venkat,
I think you have already posted this query with the subject line "Table control" with the thread below today.
table control
Try with the online link we have provided you will learn that way on your own.
Nobody here will write the whole logic for you.
Try to put in your efforts.
Regards
Abhii
Edited by: Abhii on Sep 8, 2010 3:13 PM

How to show email id in personal Data of ESS

Hi All,
I have a scenario in which i have to show the email id mail in personal data iview of the personal information .
Iam using NWDI . I have checked the personal data DC and found that the RFCs being called in the application are related to 0002 infotype. I didnt find any field for email id in 0002 infotype. In my case the email id has to be picked from su01 user data.
Please help me to proceed further.
Thanks,

Hi,
I think there ia already an Iview you can use. Check Change own data
http://help.sap.com/erp2005_ehp_04/helpdata/en/34/1100414a0e40a5ae68d5aeacc30165/frameset.htm
This picks email from from su01/su03
This is there in ESS version 1.0 also. You can add remove lot of fileds using the infoset in SPRO setting in
Personnel Management > Employee Self-Service > Service-Specific Settings > Whou2019s Who.
Srini

Unable to upload photo in Personal Date in ESS EHP6

Hi,
We are in EP 7.3. When we are trying to upload any photo at Employee Self Service > Personal Information > Personal Profile > Personal Data, we are getting below error message.
500 SAP Internal Server Error
ERROR: Invalid parameter SECONDARY_RECORD-PSKEY , value 000000013258 9999123119860101000 (termination: RABAX_STATE)
I have searched in sdn but not found solution for this. Can anyone know how to resolve this.
Thanks,
Vijaya.

Note 1815863 Dump in Class CL_HRPA_INFOTYPE_CONTAINER Method IF? Have you done any modification? Please check with standard service does it work correctly

Employee not able to view locked personal data in ESS

Gurus,
Cna anyone suggest, if the employee enter some details in the personal data related infotypes, the details get locked in backend. we are fine with this, but these locked details are not visible to the Employee thrugh ESS.
is it possible to arrange for such view in Standard implementation, we are in 604 enviornment.
thnks nd regards
vedashre

Hi
This issue is not clear
Generally ESS users do not have SAP GUI access - even if they did - one of their sessions would still be open for maintainence
The majority of locks issues that occur is if ESS user has opened a session to maintain their Personal details and HR
admin is trying to get into the record in ECC or HR administrator is editing the PERNR in the back-end and ESS user tries to access the record - in the case only the user to first create the lock will have access
Best wishes
Stuart

Issue in update of BANK INFORMATION in PERSONAL DATA INFORMATION(ESS)

Hi Experts,
i have an issue while i am trying to update the BANK INFORMATION in PERSONAL INFORMATION, i am getting the fallowing error:
Data record 0000001300090 2010033120090401000 has grouping value "" instead of "40"
Data record 0000001300090 9999123120100401000 has grouping value "" instead of "40"
please help me out

Dear Siva,
You can do this using the personalization
1. The pernr should be assigned to user id you are using having Content Administrator rights.
2. Preview the iview for Bank Inforamtion and ctrl + right click on the "Edit Button".
3. Select "Yes" for the Invisible property of button Edit.
4. Click Apply and Ok.
The button will not be visible anymore.
Regards,
Samir

Data retrieve from one table control to another table control

Hi all,
I had an requirement like to create Two table controls.
for first Table control i had an sel field defined as 'MARK'.
when i check the row in the first table control think it is header data for sales order .
all the item details have to retrieve in the second table control.
This is my requirement, i am not able to trigger when selecting the row in table control.
will anybody had an experience like this.
Regards,
Madhavi

Hi Madhavi,
If we need the case to display header and item as mentioned in 2 table controls....
we can display in table control 2/item only (the line items of the one selected in the table control 1 or the header )...so ,at a time we need to display line items for only 1 header ....
so ...first disable the selections/multiple selections to disable the row selector
We have already declared a field type C to capture the value for the field selector...so we can convert this field to a radio button and then assign a function code to the radio button at screen level
Whenever you click on the radio button ..immediately the function code is triggered..then in PAI ..we can check and find the header record with 'X' and populate the data for the table control 2
Hope it helps
Regards
Byju

Uploading data from flat file to table control

HI All,
I want to upload data to OVKK tcode using BDC. For this I wrote Z program as shown below:
REPORT ZSD_BDC_OVKK_UPLOAD
       NO STANDARD PAGE HEADING LINE-SIZE 255.
*INCLUDE bdcrecx1.
DATA : BEGIN OF T_DUMMY OCCURS 0,
       VAR(100) TYPE C,
       END OF T_DUMMY.
DATA: BEGIN OF ITAB OCCURS 0,
       KALSM(10) TYPE C,
*       KARTV(10) TYPE C,
       VKORG(4) TYPE C,
       VTWEG(2) TYPE C,
       SPART(2) TYPE C,
       KALVG(1) TYPE C,
       KALKS(1) TYPE C,
         KALSM(6) TYPE C,
         KARTV(4) TYPE C,
       END OF ITAB.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
       IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : v_filename TYPE string.
PARAMETER : filename LIKE rlgrap-filename OBLIGATORY.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR filename.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      field_name = filename
    CHANGING
      file_name = filename.
START-OF-SELECTION.
v_filename = filename.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                      = v_filename
      filetype                      = 'ASC'
     has_field_separator           = 'X'
    TABLES
      data_tab                      = T_DUMMY.
LOOP AT T_DUMMY.
    ITAB-VKORG = T_DUMMY-VAR+0(4).
    ITAB-VTWEG = T_DUMMY-VAR+5(2).
    ITAB-SPART = T_DUMMY-VAR+8(2).
    ITAB-KALVG = T_DUMMY-VAR+11(1).
    ITAB-KALKS = T_DUMMY-VAR+13(1).
    ITAB-KALSM = T_DUMMY-VAR+15(6).
    ITAB-KARTV = T_DUMMY-VAR+22(4).
    APPEND ITAB.
ENDLOOP.
DATA: FNAM(20) TYPE C,
      IDX      TYPE C.
    MOVE 1 TO IDX.
LOOP AT ITAB.
REFRESH IT_BDCDATA.
    PERFORM bdc_dynpro      USING 'SAPML080Z' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'V_T683V-KALSM(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=NEWL'.
    PERFORM bdc_dynpro      USING 'SAPML080Z' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'V_T683V-VKORG(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=SAVE'.
    CONCATENATE 'V_T683V-KALSM(' IDX ')' INTO FNAM.
     PERFORM bdc_field       USING FNAM
                                   itab-kalsm.
    CONCATENATE 'V_T683V-KARTV(' IDX ')' INTO FNAM.
     PERFORM bdc_field       USING FNAM
                                   itab-kartv.
    CONCATENATE 'V_T683V-VKORG(' IDX ')' INTO FNAM.
     PERFORM bdc_field       USING FNAM
                                   itab-vkorg.
    CONCATENATE 'V_T683V-VTWEG(' IDX ')' INTO FNAM.
     PERFORM bdc_field       USING FNAM
                                   itab-vtweg.
    CONCATENATE 'V_T683V-SPART(' IDX ')' INTO FNAM.
     PERFORM bdc_field       USING FNAM
                                   itab-spart.
    CONCATENATE 'V_T683V-KALVG(' IDX ')' INTO FNAM.
     PERFORM bdc_field       USING FNAM
                                   itab-kalvg.
    CONCATENATE 'V_T683V-KALKS(' IDX ')' INTO FNAM.
     PERFORM bdc_field       USING FNAM
                                   itab-kalks.
PERFORM bdc_dynpro      USING 'SAPLSTRD' '0300'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'KO008-TRKORR'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=LOCK'.
   PERFORM bdc_field       USING 'KO008-TRKORR'
                                   'D47K919377'.
   PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'V_T683V-VKORG(01)'.
   PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
   PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'V_T683V-VKORG(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                   '=SAVE'.
CALL TRANSACTION 'OVKK' USING IT_BDCDATA
                        MODE 'A'
                       UPDATE 'S'
                     MESSAGES INTO IT_BDCMSGCOLL.
IDX = IDX + 1 .
endloop.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
I checked in debugging mode and found that data is passed to internal table but its not uploading data to OVKK, there no data is displayed.
Please tell me solution for this.....
regards,
ravindra.

Hi,
Look at the following link you will find some good example of Table control.
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Here you need to take care to which line of table control you are populating the data.
Make sure to take care of page down in table control.
*********Try Call Transaction in MODE 'N'.
Check your OK_CODE once again.
Try to give BACk also after saving.
The Table control is mainly used to update no.of line items at one shot. No need to come BACK for each and every record.
Try to do recording in SHDB once again and see the changes closely.
Thanks.
If this helps you reward with points.
Message was edited by: KDeepak
Message was edited by: KDeepak

How to modify data in table control

hi
i have created table control where i have displayed data into table control
logic used
screen 200
PROCESS BEFORE OUTPUT.
MODULE SELECT_RECORD.
*&SPWIZARD: PBO FLOW LOGIC FOR TABLECONTROL 'TBC_200'
MODULE TBC_200_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE TBC_200_CHANGE_COL_ATTR.
LOOP AT   IT_MARA
       INTO WA_MARA
       WITH CONTROL TBC_200
       CURSOR TBC_200-CURRENT_LINE.
    MODULE TBC_200_GET_LINES.
*&SPWIZARD:   MODULE TBC_200_CHANGE_FIELD_ATTR
ENDLOOP.
MODULE STATUS_0200.
PROCESS AFTER INPUT.
*&SPWIZARD: PAI FLOW LOGIC FOR TABLECONTROL 'TBC_200'
LOOP AT IT_MARA.
    CHAIN.
      FIELD WA_MARA-MATNR.
      FIELD WA_MARA-ERSDA.
      FIELD WA_MARA-ERNAM.
      MODULE TBC_200_MODIFY ON CHAIN-REQUEST.
    ENDCHAIN.
    FIELD WA_MARA-MARK
      MODULE TBC_200_MARK ON REQUEST.
ENDLOOP.
MODULE TBC_200_USER_COMMAND.
*&SPWIZARD: MODULE TBC_200_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE TBC_200_CHANGE_COL_ATTR.
module -
MODULE SELECT_RECORD.
MODULE SELECT_RECORD OUTPUT.
SELECT MATNR ERSDA ERNAM
        FROM MARA
        INTO CORRESPONDING FIELDS OF TABLE it_mara.
ENDMODULE.                 " SELECT_RECORD OUTPUT
and
another thing
i have made field MARA-ERSDA. and FIELD WA_MARA-ERNAM editable by
input possible using layout
so
now those 2 fields contents are editable
i want to know how to edit and save the data
some body guide.
and i want to put the lock so that i can update
can tell how to implement lock.
Thanks
Edited by: viju bangalore on Jan 27, 2011 10:40 AM

Hi Viju,
In PAI do something like this
LOOP AT itab.
    MODULE mod_table_control.
ENDLOOP.
MODULE user_command_0100.
at module mod_table_control put this
MODULE mod_table_control INPUT.
MODIFY itab FROM demo_conn INDEX flights-current_line.
if sy-subrc ne 0.
       insert itab.
endif.
ENDMODULE.
for saving you can create at custom gui status with a save button, and at MODULE user_command_0100 save the data.

How to clear data in Table Control.

hi! all
How to clear the data in table control.
i have a Table control which displays column A data from the previous screen and allows to enter column B and column C and i have a button CLEAR, when i click CLEAR button the Data displaying in table control has to be cleared. how to do it.
Regards,
Nagulan

Hi,
Loop over the internal table of table control & clear data from table control.
loop at tctab.
clear tctab.
modify tctab.
endloop.
Best regards,
Prashant

How to clear data from Table-Control

Hi all,
I am working on table control. I have some data on the table control.
When I press the 'Cancel' button, I require that the table-control should be cleared.
I tried using REFRESH CONTROL TC01 USING SCREEN 1001. But, the data doesn't get cleared.
Please advise.
Regards,
Saurabh Buksh.

hi
good
try this example
REPORT demo_dynpro_tabcont_loop_at.
CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
DATA: cols LIKE LINE OF flights-cols,
      lines TYPE i.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF demo_conn.
      TABLES demo_conn.
SELECT * FROM spfli INTO CORRESPONDING FIELDS OF TABLE itab.
LOOP AT flights-cols INTO cols WHERE index GT 2.
cols-screen-input = '0'.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
DESCRIBE TABLE itab LINES lines.
flights-lines = lines.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE read_table_control INPUT.
MODIFY itab FROM demo_conn INDEX flights-current_line.
ENDMODULE.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'TOGGLE'.
      LOOP AT flights-cols INTO cols WHERE index GT 2.
        IF cols-screen-input = '0'.
          cols-screen-input = '1'.
        ELSEIF cols-screen-input = '1'.
          cols-screen-input = '0'.
        ENDIF.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDLOOP.
    WHEN 'SORT_UP'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) ASCENDING.
        cols-selected = ' '.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'SORT_DOWN'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) DESCENDING.
        cols-selected = ' '.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'DELETE'.
      READ TABLE flights-cols INTO cols
                              WITH KEY screen-input = '1'.
      IF sy-subrc = 0.
        LOOP AT itab INTO demo_conn WHERE mark = 'X'.
          DELETE itab.
        ENDLOOP.
      ENDIF.
ENDCASE.
ENDMODULE.
thanks
mrutyun^

Regarding clearing of data in table control

In the module pool program using table control i need to enter data and save it to a customized table. But when i input data and press enter, all data gets cleared from the screen. Also i tried the same by appending into internal table. At that time data is displayed on the screen but all other rows gets inactive. Please provide a solution for this issue.

Still my problem is not solved. I am posting my PBO And PAI Modules. In the below example it_mat is the table control table and it_ormat is the internal table.
PBO Modules.
*&spwizard: pbo flow logic for tablecontrol 'TCMAT'
module TCMAT_change_tc_attr.
*&spwizard: module TCMAT_change_col_attr.
loop at   IT_MAT
       with control TCMAT
       cursor TCMAT-current_line.
    module TCMAT_get_lines.
*&spwizard:   module TCMAT_change_field_attr
endloop.
*&spwizard: output module for tc 'TCMAT'. do not change this line!
*&spwizard: update lines for equivalent scrollbar
module TCMAT_change_tc_attr output.
describe table IT_MAT lines TCMAT-lines.
endmodule.
*&spwizard: output module for tc 'TCMAT'. do not change this line!
*&spwizard: get lines of tablecontrol
module TCMAT_get_lines output.
g_TCMAT_lines = sy-loopc.
READ TABLE IT_ORMAT INDEX SY-STEPL.
MODIFY IT_MAT FROM IT_ORMAT INDEX SY-STEPL.
endmodule.
PAI modules.----
*&spwizard: pai flow logic for tablecontrol 'TCMAT'
loop at IT_MAT.
    chain.
      field IT_MAT-MATNR.
      field IT_MAT-MAKTX.
      field IT_MAT-GROES.
      field IT_MAT-ZEINR.
      field IT_MAT-TCQTY.
      field IT_MAT-IBRFLG.
      module TCMAT_modify on chain-request.
    endchain.
    field IT_MAT-CFLG
      module TCMAT_mark on request.
endloop.
module TCMAT_user_command.
*&spwizard: module TCMAT_change_tc_attr.
*&spwizard: module TCMAT_change_col_attr.
module TCMAT_modify input.
MODIFY IT_ORMAT FROM IT_MAT INDEX SY-STEPL.
endmodule.
*&spwizard: input modul for tc 'TCMAT'. do not change this line!
*&spwizard: mark table
module TCMAT_mark input.
data: g_TCMAT_wa2 like line of IT_MAT.
    if TCMAT-line_sel_mode = 1
    and IT_MAT-CFLG = 'X'.
     loop at IT_MAT into g_TCMAT_wa2
       where CFLG = 'X'.
       g_TCMAT_wa2-CFLG = ''.
       modify IT_MAT
         from g_TCMAT_wa2
         transporting CFLG.
     endloop.
endif.
modify IT_MAT
    index TCMAT-current_line
    transporting CFLG.
endmodule.
*&spwizard: input module for tc 'TCMAT'. do not change this line!
*&spwizard: process user command
module TCMAT_user_command input.
OKCODE = sy-ucomm.
perform user_ok_tc using    'TCMAT'
                              'IT_MAT'
                              'CFLG'
                     changing OKCODE.
sy-ucomm = OKCODE.
endmodule.

How to provide F4 help for a field in table control

Hi Friends,
I have requirement like below.
1.Create one custom transaction code with header and item information.
2.In item level, we will be designed table control to enter/display the data.
3.Table controls first field will be material number and next DOT number (Material may have many DOT numbers) and so on.
4.First user will enter material number in the table controls first rows first field and go to DOT number field.
5.DOT number has drop down option. If user selects drop down box of DOT number, he gets all the DOT numbers available in database. User selects one DOT number and double clicks on it then it will be populated in DOT number field box.
But for point number 5, business wants like when ever user enters material number in table control first field then select DOT numbers drop down then they want to see the particular materials DOT numbers only in the drop down list for selection. Not all DOT numbers available in data base. Same thing should happen for all item lines in table control.
Please see below example.
Assume data base table has 10 DOT numbers. But material number has only 2 DOT numbers. When ever user enters material number in item level table control and selects DOT numbers drop down then it should show only 2 DOT numbers which are related to particular material number. Not all 10 DOT numbers.
Could you please suggest me, how can we achieve this?

Hello,
Check this :-
For POV
Input Help in Dialog Modules
You can call dialog modules in the POV event using the event keyword PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON VALUE-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F4 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. The module <mod> is defined in the ABAP program like a normal PAI module. However, the contents of the screen field <f> are not available, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. You can now program your own value lists in the module. However, this procedure is only recommended if it really is not possible to use a search help. Defining search helps is much easier than PROCESS ON VALUE-REQUEST, since the system takes over some of the standard operations, such as getting field contents from the screen. It also ensures that the F4 help has a uniform look and feel throughout the system. Furthermore, it means that you do not have to reassign input help to fields on each screen.
Despite the introduction of search helps (and search help exits), there are still cases in which you need to use parts of the standard F4 functions directly. In this case, there are some standard function modules that you can use in the POV event. They support search helps, as well as all other kinds of input help, and are responsible for data transport between the screen and the input help. These all have the prefix F4IF_. The most important are:
F4IF_FIELD_VALUE_REQUEST
Calls the input help of the ABAP Dictionary dynamically. You can pass the component names of a structure or database table of the ABAP Dictionary to the function module in the import parameters TABNAME and FIELDNAME. The function module starts the ABAP Dictionary input help for this component. All of the relevant screen fields are read. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
F4IF_INT_TABLE_VALUE_REQUEST
This function module displays a value list that you created in an ABAP program. The value list is passed to the function module as the table parameter VALUE_TAB. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
There are also two function modules - DYNP_VALUES_READ and DYNP_VALUES_UPDATE - that can read the values of screen fields and return values to them during the POV event. For further information, refer to the relevant function module documentation.
Input help in dialog modules
REPORT DEMO_DYNPRO_F4_HELP_MODULE.
TYPES: BEGIN OF VALUES,
CARRID TYPE SPFLI-CARRID,
CONNID TYPE SPFLI-CONNID,
END OF VALUES.
DATA: CARRIER(3) TYPE C,
CONNECTION(4) TYPE C.
DATA: PROGNAME LIKE SY-REPID,
DYNNUM LIKE SY-DYNNR,
DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
VALUES_TAB TYPE TABLE OF VALUES.
CALL SCREEN 100.
MODULE INIT OUTPUT.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
CLEAR: FIELD_VALUE, DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'CARRIER'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE VALUE_CARRIER INPUT.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = 'DEMOF4HELP'
FIELDNAME = 'CARRIER1'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CARRIER'.
ENDMODULE.
MODULE VALUE_CONNECTION INPUT.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = PROGNAME
DYNUMB = DYNNUM
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = DYNPRO_VALUES.
READ TABLE DYNPRO_VALUES INDEX 1 INTO FIELD_VALUE.
SELECT CARRID CONNID
FROM SPFLI
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB
WHERE CARRID = FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'CONNID'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CONNECTION'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = VALUES_TAB.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
The input fields have been adopted from the program fields CARRIER and CONNECTION. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
MODULE INIT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON VALUE-REQUEST.
FIELD CARRIER MODULE VALUE_CARRIER.
FIELD CONNECTION MODULE VALUE_CONNECTION.
When the user chooses input help for the individual fields, the following is displayed:
For the Airline field, the POV module VALUE_CARRIER is called. The function module F4IF_FIELD_VALUE_REQUEST displays the input help for the component CARRIER1 of the structure DEMOF4HELP from the ABAP Dictionary, namely the search help DEMOF4DE. The users selection is returned to the screen field CARRIER.
For the Flight number field, the POV module VALUE_CONNECTION is called. The function module DYNP_VALUE_READ transports the value of the screen field CARRIER into the program. The program then reads the corresponding values from the database table SPFLI into the internal table VALUES_TAB using a SELECT statement, and passes the internal table to F4IF_INT_TABLE_VALUE_REQUEST. This displays the internal table as input help, and places the users selection into the screen field CONNECTION.
For POH------------
Field Help
There are three ways of displaying field help for screen elements:
Data Element Documentation
If you place a field on the screen in the Screen Painter by copying a ABAP Dictionary field, the corresponding data element documentation from the ABAP Dictionary is automatically displayed when the user chooses field help (as long as the help has not been overridden in the screen flow logic).
For further information about creating data element documentation, refer to data elements.
Data Element Supplement Documentation
If the data element documentation is insufficient, you can expand it by writing a data element supplement
Data element supplement documentation contains the heading Definition, as well as the following others:
Use
Procedure
Examples
Dependencies
To create data element supplement documentation for a screen, choose Goto ® Documentation ® DE supplement doc. from the element list of the screen. A dialog box appears in which the system proposes a number as the identified for the data element supplement. You can then enter help texts for the above headings using the SAPscript editor.
Data element supplement documentation created in this way is program- and screen-specific. Any data element supplement documentation created in the ABAP Dictionary with the same number is overridden by the screen-specific documentation. You can link existing data element supplement documentation created in the ABAP Dictionary with a screen field by using the table THLPF. To do this, crate a new row in THLPF containing the following data: Program name, screen name, field name, and number of the data element supplement documentation.
To display data element supplement documentation, you must code the following screen flow logic in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> [MODULE <mod>] WITH <num>.
After PROCESS ON HELP-REQUEST, you can only use FIELD statements. If there is no PROCESS ON HELP-REQUEST keyword in the flow logic of the screen, the data element documentation for the current field, or no help at all is displayed when the user chooses F1. Otherwise, the next FIELD statement containing the current field <f> is executed.
If there is screen-specific data element supplement documentation for the field <f>, you can display it by specifying its number <num>. The number <num> can be a literal or a variable. The variable must be declared and filled in the corresponding ABAP program.
You can fill the variables, for example, by calling the module <mod> before the help is displayed. However, the FIELD statement does not transport the contents of the screen field <f> to the ABAP program in the PROCESS ON HELP-REQUEST event.
For further information about data element supplement documentation, refer to Data Element Supplements.
Calling Help Texts from Dialog Modules
If data element supplement documentation is insufficient for your requirements, or you want to display help for program fields that you have not copied from the ABAP Dictionary, you can call dialog modules in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON HELP-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F1 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. However, the contents of the screen field <f> are not available in the module <mod>, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. The field help should not be dependent on the user input.
The module <mod> is defined in the ABAP program like a normal PAI module. The processing logic of the module must ensure that adequate help is displayed for the field in question. Instead of calling an extra screen with text fields, you should use one of the following function modules to display a suitable SAPscript document:
HELP_OBJECT_SHOW_FOR_FIELD
This function module displays the data element documentation for components of any structure or database table from the ABAP Dictionary. You pass the name of the component and structure or table to the import parameters FIELD and TABLE.
HELP_OBJECT_SHOW
Use this function module to display any SAPscript document. You must pass the document class (for example, TX for general texts, DE for data element documentation) and the name of the document to the import parameters DOKCLASS and DOKNAME. For technical reasons, you must also pass an empty internal table with the line type TLINE to the tables parameter of the function module.
For further information about how to create SAPscript documents, refer to the Documentation of System Objects documentation.
Field help on screens.
REPORT DEMO_DYNPRO_F1_HELP.
DATA: TEXT(30),
VAR(4),
INT TYPE I,
LINKS TYPE TABLE OF TLINE,
FIELD3, FIELD4.
TABLES DEMOF1HELP.
TEXT = TEXT-001.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE F1_HELP_FIELD2 INPUT.
INT = INT + 1.
CASE INT.
WHEN 1.
VAR = '0100'.
WHEN 2.
VAR = '0200'.
INT = 0.
ENDCASE.
ENDMODULE.
MODULE F1_HELP_FIELD3 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW_FOR_FIELD'
EXPORTING
DOKLANGU = SY-LANGU
DOKTITLE = TEXT-002
CALLED_FOR_TAB = 'DEMOF1HELP'
CALLED_FOR_FIELD = 'FIELD1'.
ENDMODULE.
MODULE F1_HELP_FIELD4 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW'
EXPORTING
DOKCLASS = 'TX'
DOKLANGU = SY-LANGU
DOKNAME = 'DEMO_FOR_F1_HELP'
DOKTITLE = TEXT-003
TABLES
LINKS = LINKS.
ENDMODULE.
The next screen (statically defined) for screen 100 is 100. It has the following layout:
The screen fields DEMOf1HELP-FIELD1 and DEMOF1HELP-FIELD2 from the ABAP Dictionary and the program fields FIELD3 and FIELD4 are assigned to the input fields. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON HELP-REQUEST.
FIELD DEMOF1HELP-FIELD2 MODULE F1_HELP_FIELD2 WITH VAR.
FIELD FIELD3 MODULE F1_HELP_FIELD3.
FIELD FIELD4 MODULE F1_HELP_FIELD4.
The components FIELD1 and FIELD2 of structure DEMOF1HELP both refer to the data element DEMOF1TYPE. This data element is documented, and also has two supplements with numbers 0100 and 0200.
The following field help is displayed:
When the user chooses F1 on the input field for DEMOF1HELP-FIELD1, the data element documentation for DEMOF1TYPE is displayed, since the field does not occur in the PROCESS ON HELP-REQUEST event.
If the user chooses F1 repeatedly for the input field DEMOF1HELP-FIELD2, the data element documentation is displayed, along with the supplement documentation for either 0100 or 0200 alternately. The variable VAR is filled in the dialog module F1_HELP_FIELD2.
When the user chooses F1 on the input field for FIELD3, the data element documentation for DEMOF1TYPE is displayed, since this is called in the dialog module F1_HELP_FIELD3 by the function module HELP_OBJECT_SHOW_FOR_FIELD.
When the user chooses F1 on the input field for FIELD4, the SAPscript documentation DEMO_FOR_F1_HELP is displayed, since this is called in the dialog module F1_HELP_FIELD4 by the function module HELP_OBJECT.
Regards,
Deepu.K

Table Control Icon appearing in Personal Data in ESS in Portal

Similar Messages

Maybe you are looking for