Portal center: A lot of missing documents..
Hello,
As I was unable to find a contact/feedback form on portalcenter/portalstudio, I thought I'd just try here, and see what happens.
I am trying to find documentation on how to develop plsql portlets, so I found the "Plsql Home" on portalcenter: http://portalstudio.oracle.com/servlet/page?_pageid=473&_dad=ops&_schema=OPSTUDIO&_mode=3
As I am a complete newbie to portlet development, I thought the doc named "Portlet Development Guidelines" on this link: http://portalstudio.oracle.com/servlet/page?_pageid=936&_dad=ops&_schema=OPSTUDIO
might be a good place to start. Problem is that when I click the link, I am presented with a page with an error message: "Error: Page not found. (WWC-44234)".
Nothing else. No info on how to report the missing document, no help at all.
In fact, after looking around at portalcenter for more than 15 minutes, I have not been able to find a single link/pointer on how to report missing links or other problems/feedback.
Maybe someone from Oracle could get the message through to the right person/group?
And: This is not the only document missing, its just an example. There are lots of others as well. In fact, there are so many that its ridicilous.
Come on, Oracle. You can do better than this!
You can contact me by mail if you require more information.
regards,
Jens
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Similar Messages
-
Profit Center to be populated in documents already posted
Hi,
I work for a retail client. There is a store that went live about a week back. There is a validation applied, which updates a profit center to the tender GL accounts (differnet kinds of revenue - like cash/credit card/debit card/sodexho etc) .
As the validation was missed to be transported - profit center is not to be found in tender documents. Is there a way out that I get the profit center updated to the tender documents that have been posted until now. In other words update of profit center in the documents already posted.
Regards,
Soujanya.hai
Profit center never gets updated in Table BSIK and BSAK ...You will never get it in FBL1N..Please use KE5Z or S_ALR_87013346 or S_ACO_52000888 Payables - Profit center as an alternate ..
As you must be aware that profit Center information is never entered in Vendor in line item. It is only entered in the expense/income line items...You will always find this field blank in BSIK ...BSIK and BSAK segmentation table is BSEG , PRCTR is there hence it can be set in O7R3 as a special field to be displayed in ledger but it will not show values. I hope it clears you.
Thanks and regards -
Profit center change in posted accounting document
Hello,
please, is it possible to change the profit center in already posted accounting document?
We DTO'd open customer balance with wrong profit center. PC document has been created as well. Please, what is the proper way to change the PC?? Or how to proceed?
Thanks a lot
Kind regards
MarcelaIt is not possible to change profit center, for that matter any other CO assignment cannot be changed. You can try transfering to correct profit center through 9ke0
-
When I download Microsoft word documents (if have word 2007), I have somehow changed the settings and it downloads them in wordpad, and the format is very bad and I can't read a lot of the document. How do I change the default setting back to using Microsoft Word 2007 to open these documents?
== This happened ==
Every time Firefox opened
== about a few weeks ago - I had tried to open some docuuments saved on a mac, my PC (which runs Windows 7), used word pad to open these, and this seems to have changed the default settings somehow.See this:
[http://support.mozilla.com/en-US/kb/Managing+file+types] -
Cost Center not updating in FI documents
Hi All,
I have an issue,
I am confirming Gem,Maintenance PM order,and consuming spare part, but in FI documents its updates the cost center,PM pm order cost receiver object is cost center in the settlement rule.
please guide me which settings required for update the cost center in FI documents.
Regards,
SanthoshHi,
The cost center on the Goods issue document is not related to the settlement cost center on the order.Why would you need the settlement cost center on the Goods issue FI document?
Regards
Narasimhan -
Missing Document Number Report in Oracle Accounts Payable
Hi All,
Can you please let me know if there alternative report for Missing Document Number Report in R12......
similar to what we had in 11.5.9 Instance In AP
Thanks
Edited by: user5358827 on Apr 19, 2010 11:31 AMHi
We have tried this but no output. ie the issue continues the same. This issue is there for all PC including Server. Is there any other solution avaliable. .
Regards
Sunil -
Searchs in Portal doesn't search inside the document
My searchs in oracle portal doesn't search inside the documents. It only works in txt documents, but not in word docuements, excel documents, etc...
Patch 3.0.9.8.2 Database Oracle 9i 9.0.1.3.1I assume that you are using Oracle (Intermedia) Text functionality. Without this searching within documents is not supported anyway. In which case you need to make sure that your indexes are being syncronized regularly (see the configuration guide on how this is done) and that there are no indexing errors for your DOC index - WWSBR_DOC_CTX_INDX. To determine this, look at the the view CTX_USER_INDEX_ERRORS.
-
R/3 vs BW - Missing documents in BW
Hi,
After comparing the BW data with R/3 in production, we found the following variances,
Identified BW variances:
1) PCA Cube Variance 11/05 & 12/05 - resolved
resolved by execution of full load.
2) PCA Cube Variance 08/05 - unresolved
Unable to utilize FI-SL doc type field.
Question :
Could you please help me to identify the root cause for this issue and help me to determine a solution for preventing missing documents in BW.
Thanks,SenthilHi,
Thanks for your reply.
I have checked the values for doc type field, it is coming from R/3.
I also checked the transfer and update rules, records are not filtered, I don't get any other clue as well. Missing records were updated through full update for the period Nov-05.
I supposed to identify the root cause for this issue and also find a solution for preventing missing documents in BW (Future).
Please share if you have any other idea as well.
Thanks, Senthil -
Wrong profit center capture in the billing document of intercompany sales
Hi Experts,
I am facing a problem on the incorrect profit center capture in the billing document while billing to external customer. I did try to search SAP notes found that it can be use substitution user exit to correct it. So I try to find out the substitutions by T-code GBB1 in the folder "profit center accounting" under create sale order.
The problem is how to maintain the substitution? Besides that did any one knows how to write the user exit for this substitution. I will appreciate if you can give me some sample program. Thanks in advance.
Regards,
Jennie TanHi,
Refer to program RGGBS000 FORM u100. Your user exit has to be modelled along those lines. Change the select statement to select the profit center from the material master using the material number field (PCASUB-MATNR) and plant (PCASUB-WERKS). Move this profit center to the profit center field (PCASUB-PRCTR).
Copy RGGBS000 to ZGGBS000 and then write this code.
Just writing this out of my mind. Get an abaper to help you with this.
TABLES: MBEW.
DATA: WA_MARC TYPE MARC.
exits-name = 'U345'.
exits-param = c_exit_param_none.
exits-title = 'profit center subs'.
APPEND exits.
FORM u345.
SELECT * FROM MARC INTO WA_MARC WHERE MATNR = PCASUB-MATNR AND WERKS = PCASUB-WERKS.
IF SY-SUBRC = 0.
MOVE WA_MARC-PRCTC TO PCASUB-PRCTR.
ENDIF.
ENDFORM.
In SM30 table V_T80D assign the program ZGGBS000 to application area GBLS.
Then write your substitution in 0KEM. Make sure in TCode 0KEL the the activation level is 1 or 3.
Thanks and Regards
Shivram. -
I cannot open any photos/movies in Entourage, message comes up saying 'folder cannot be found'. Last week I deleted lots of old documents/downloads and fear that I have accidentally deleted what is needed to open photos/movies. Any suggestions please? Should re-install the whole Office:mac program, and is it easy to do this without disturbing what I have on my computer?
When you password-protected these folders then you did so to prevent anyone from accessing the pictures unless he had the correct password, even if he deleted the password application itself. Are you now asking how to get around this protection? If you
selected a robust protection scheme then you probably got what you wanted: uncrackable encryption. You need to check the FAQs of this application and/or google for clues. Alternatively you could restore your files from your external backup medium (if you have
one . . .). -
Portal Center viewlets don't work for me - other source of info?
I can't display Java viewlets from Portal Center because of the secure browser configuration at my company. This is stopping me accessing the OmniPortlet demos. Is there another way of getting this information? PDF files? Looks like a useful portlet, but if I can't read about it I can't really tell...
Gavin, I forwarded your question to the Portal team. You should get an answer shortly.
You can also post your question at:
Oracle Application Server Portal
...which is monitored by members of that team. -
Logic required to get the missed document nos in arport
Hi Guys,
Document numbers are flowing in to two ODS's. These doc numbers are available in 'X' and 'Y' ODS's.
We are missing some doc nos in both the ODS's.
For example: 101,102,103 doc nos are available in 'X" ODS also 101 1nd 102 also avaialable in'Y' ODS.
But we are missing 103 in "Y' ODS.
we want to display those doc nos in a report.
We Created an infoset on these two ODS's.
What kind of logic is required to display these missed doc nos in a BW Report
Thanks,
NelaI would suggest to use another DSO, specifically for this missing document numbers with Document Number and two Flags (FLAG1 and FLAG2). Both DSO1 and DSO2 will Source this 3rd DSO (In this DSO, Doc Number will be Unique - No Duplicates).
In the transformation for DSO1, lookup DSO2, compare the Doc Numbers and fill FLAG1 as 'X' on each missing record.
In the transformation for DSO2, lookup DSO1, compare the Doc Numbers and fill FLAG2 as 'X' on each missing record.
Then you can generate two reports for missing Doc Numbers based on FLAG1 and FLAG2.
This is just an example, you could do the same in other optimized ways.... discuss with your ABAPer.... -
Different Profit Center in GR and Invoice Document
Hi,
I have a query in the Purchase order cycle.
The Profit Center Accounting document has a different Profit Center in the Goods Receipt Document and Invoice Receipt Document. I found that in the case of GR it picks up the Profit Center from Material Master, whereas in the Invoice document it picks up from the Sales Order (MTO Scenario). Hence there is a mismatch.
Please advise on how i can have a same Profit Center. Where do i need to make necessary corrections.
Thanks in Advance,
SafiHi
in general sales order picks profit center from material master so same profit center is possible when doing GR /IR Plz chek it
thanks
MvNr -
Spool full and missing document number
Hi,
Can someone explain why a full spool affects missing document number? Are some tables being shared?
ThanksHi,
If the number range missing because of the spool full in your system that means some job/activity that was running during that time frame which couldn't create the spool and maybe that's why your number range is missing...
Please run Spool consistency check with RSPO1043 as per SAP Note 98065..
Regards
Bhuban -
Missing document flow for STO proc. delivery
Hi Experts,
I have problem with missing document flow for STO proc. delivery. I debugged VL10 and BADI (IF_EX_LE_SHP_DELIVERY_PROC~SAVE_DOCUMENT_PREPARE), I found that document flow parameters (CT_XVBFA) for this BADI interface is empty.
Any comments or solution.
Thanks,
SASD functional are satisfied with configuration.
Please advise.
Thanks,
SA
Maybe you are looking for
-
Getting filename in FTP Adapter in ESB
I am trying to get the filename on an inbound FTP adapter in an ESB. I've followed the directions I have found, by following these steps: 1. The namespace xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFun
-
Re: Can't get S-Video to Composite on my Satellite A200-1AE
I am trying to connect my laptop with my TV using an S-Video to Composite cable and i get no colour on my TV. Only black and white. I am trying to find a setting in Nvidia Control Panel to switch from S-Video mode to Composite mode but i get only S-V
-
Hi CIN Experts, When I have transfer the capital goods transfer on credit to next year through J2I8, but some of the entry has not been transfer to the current Cenvat On Hold account. In J2I8, I have given co. code, plant, posting date & excise gro
-
Standard F4 (search help) in the web dynpro JAVA
Hi, I have a small doubt in web dynpro Java. Basically I am an ABAP developer. We created some custom Remote function modules (RFM). Now are able to call RFM through web dynpro JAVA in the portal. We are able to run the RFMs in the portal.
-
My iphone has always connected automatically and without problem to the wifi at work i.e. BTBusinesshub and at home BTHomehub but yesterday it would not connect at work. It is ok at home but again today at work it is not connecting. It appears to try