Table control values are not able to read with out a user action.
Hi All,
I am working with a module pool programing and I am calling 3 sub screens into my main normal screen.
In one of the sub screen, I have created a table control and getting the initial values from database and displaying.
Now I try to change the couple of fields in my table control and with out user action (not pressing Enter after changing the values in table control).
I try to save the edited/changed values in table control into the database. But I am not able to do so, since the change values are not able to pick.
My requirement is end user will not do any action(press the enter key ) and he directly presses the save button which is defined in the main normal screen.
Kindly suggest some solution.
Thanks
Geetha
Hi Geetha,
in SAP Default While pressing save button the modified value will pick up because
Save button will perform enter function also.
Regards,
Thangam.P
Similar Messages
-
In SharePoint 2013, Office 2010 and IE 8. Office web apps is not configured.
Some users with Contribute or full control are not able to edit and save documents back to SharePoint library.
When they try to save they are getting following error:
1. https://.....pptx is read-only. Do you want to save changes to a different file name?
2. Project canot access "https://...."
Try one of the following
The file may be temporarily open by another program. wait a momoment and try again.
A file with the same name may already exists. Save it with a different file name.
You may be trying to save to a read only folder. Save to a different folder instead.
Please help me with this issue.
will be waiting for any suggestions or solutions.
Thanks
Krish
99Thanks again for quick response.
I have requested users who are having this issue to try check in/ check out, and share the results.
Result with CheckIn/CheckOut:
User was able to check out but no edit option.
'Edit Document' option under 'Files' tab was greyed out. I did check permissions every thing seems fine he has full control over the site and document library.
Please advise.
Thanks
Krish
99 -
Custom Table Editor: values are not populated to the model
H,
I wrote a custom table renderer which uses JComboBox + editor, which seem to work (after editing, the displayed cell reflects the change) but after editing the table manually, the model is not altered when i call table.getModel();
The editor part is as simple as
class MPComboBoxEditor extends DefaultCellEditor {
private final JComboBox box;
public MPComboBoxEditor(JComboBox b) {
super(b);
this.box = b;
}The renderer:
public class CellRendererWithMPComboBox extends JLabel implements TableCellRenderer {
private final Context c;
private final JTable table;
private DefaultTableCellRenderer rend = new DefaultTableCellRenderer();
private JLabel label = new JLabel();
public CellRendererWithMPComboBox(Context c, JTable table) {
super();
this.c = c;
this.table = table;
* Set this renderer to the given column
* @param column
public void setRendererTo(int column) {
TableColumn col = table.getColumnModel().getColumn(column);
col.setCellEditor(new JComboBoxEditor(JComboBox(<some values>)));
col.setCellRenderer(this);
@Override
public Component getTableCellRendererComponent(JTable table, Object value,
boolean isSelected, boolean hasFocus, int row, int column) {
if (hasFocus && isSelected) {
if (isSelected) {
setForeground(table.getSelectionForeground());
super.setBackground(table.getSelectionBackground());
} else {
setForeground(table.getForeground());
setBackground(table.getBackground());
label.setText((value == null) ? "" : value.toString());
return label;
} else {
label.setText((value == null) ? "" : value.toString());
return label;
}the model simply extends DeafultTableModel to get formatted numbers.
@Override
@SuppressWarnings("unchecked")
public Object getValueAt(int row, int column) {
Object o = super.getValueAt(row, column);
Class t = getColumnClass(column);
if (!t.getName().equals("java.lang.Object")) {
if (o != null && (t.isAssignableFrom(Double.class) ||
t.isAssignableFrom(double.class) ||
t.isAssignableFrom(float.class) ||
t.isAssignableFrom(Float.class))) {
return FormatNumber.formatDezimal(Double.valueOf(o.toString()));
} else {
return o;
} else {
return o;
}Do i need to override some setValueAt method in the editor/renderer or something?
Thanks one more time!
Regards,
AndreasI don't see any getModel() in your code extract. If the renderer renders it right after edition, then the value is probably correct in the model.
Also, remember [this thread|http://forums.sun.com/thread.jspa?threadID=5396048], where it appeared you were not clear about which model you were looking at.
Do i need to override some setValueAt method in the editor/renderer or something?No. But have you overridden the model's setValueAt?
Edited by: jduprez on Jul 15, 2009 4:56 PM -
Pivot Table: measure values are not shown
Good afternoon!
I'm trying to show data in pivot table. All the columns are in single logical table. I have achieved next result:
Image: !http://pics.livejournal.com/whitish/pic/0000hgz1!
But measures in cells are'not displayed.
In physical data source (xls file) my data stored as:
Image: !http://pics.livejournal.com/whitish/pic/0000kctt!
Could someone please help me to display my measures in cells?
Thanks in advance,
Alex.Hi.
Maybe is aggregation rule on Fuzzy Clussification measure set to None (more option/aggregation rule), if yes leave it to default.
Regards
Goran
http://108obiee.blogspot.com -
FDQM - Not able to login with the admin user
Hi,
I am not able to login to FDQM web browser using the admin user. I am facing the error as below;
Error: Error retreiving security agent header.
Detail: InnerException1: Access to the path 'D:\Oracle\Middleware\EPMSystem11R1\logs\fdm\Common\' is denied.
I tried checking the Load Balance Configuration settings, where i found the Shared services Test connection was failing. But i am able to login to Shared services with admin user.
Can any one please help me. It is most critical and your replies are most welcome & appreciated.
Thanks
DamodharWhen was the last time you were able to login and what has changed since that time?
Has someone changed access privileges to that specific location => Access to the path 'D:\Oracle\Middleware\EPMSystem11R1\logs\fdm\Common\'?
Thank you,
Todd Rebner -
Not able to login with new LDAP user in portal..
All,
We have created a new user in our LDAP environment in Portal. ( not UME ). I am able to view the user id in Identity management and assigned the necessary roles. but, i am unable to login using the new user id. Can anybody please tell me what is missing here ? Thanks in advance.Hi Addy,
As Raghu said, this seems to be a password problem.
Log into the Portal as an User administrator.
Find the user and Click on Modify.
In User Information, Add a new password.
Then try to login with the given user id again with the new password.
Good Luck!!!
Biroj Patro -
Problems with seeing computers on the network map but they are not able to connect with each other
Hi All,
We have 6 HP pavillion Slimline s3620f PCS(Pentium Dual COre ED200) with 10/100 and wireless connections. They are running Windows Vista Home 64. We are also trying to connect a macbook, a laptop with vista 32, and a a mac with win xp running via bootcamp. We upgraded to the WRT160Nv2 for wireless access.
We have the cable modem connected to the router. The router is connected to a switch. On the network map, all connections are working/green(can access internet). Before this, in the vista network map each computer could connect to the other. NOw each computer can only connect to the router and one particular other computer. Each computer lists itself and that one particular other computer and the router. If I look at the full map, all are listed but they cannot connect to each other.
I hope this makes sense. Any suggestions?
LYour computer firewall is not recongnizing your router.
Greetings from Northern Ontario, Canada -
My iphone 4s are not able to match with my Itunes
my iphone 4s can't match with my itunes
There are two ends to a wireless network. Try rebooting your router. Just pull the power for a few seconds and replug. No settings are lost.
(The fact that all your other devices connect to the internet is irrelevant) -
I am not able to read the xslt table column value.
Hi,
I have the scenario like this.
I have two irpt pages first.irpt and second.irpt and saperate xslt tables for each page and common js file for two pages.
when I click on first.irpt page xslt table row that opens the second.irpt as a popup window then I click on the column in second.irpt xslt row after that column value should be inserted in to first.irpt xslt table column.
In above I have done everything except I am not able to update the first.irpt xslt table column as Even I am not able to read that value.
For your reference:
/* This function will be called when we select the row in first.irpt xslt table here SelectBatch_b.irpt means second.irpt
function getBatch(row)
var id=row;
var material=document.getElementById('Material_'+row).value;
var location=document.getElementById('StoreLoc_'+row).value;
var plant=1000;
var strUrl = "SelectBatch_b.irpt";
strUrl = "?plant="plant"&""location="location"&""material="material;
window.open (strUrl,"mywindow");
/*This function will be called when we select the row in second.irpt (SelectBatch_b.irpt)
function getBatchID(row)
var Batch=document.getElementById('Batch_'+row).value; // reading second.irpt xslt table column value
document.getElementById('Batchc1').value=Batch; // reading first.irpt xslt table column value and inserting.
window.close(); // here I am getting error like object expected.
Please help me in this .
Edited by: rajkumar12345 on Feb 29, 2012 1:45 PMHi Rajkumar,
Please find below the method to pass the variable back and forth in .irpt page.
First Page:
var Toaccessinchildpage = "value";
function getBatch(row)
var id=row;
var material=document.getElementById('Material_'+row).value;
var location=document.getElementById('StoreLoc_'+row).value;
var plant=1000;
var strUrl = "SelectBatch_b.irpt";
strUrl += "?plant="plant"&"+"location="location"&"+"material="+material;
window.open (strUrl,"mywindow");
function populate(strBatch)
document.getElementById('Batchc1').value=strBatch;
Second Page:
function getBatchID(row)
var Batch=document.getElementById('Batch_'+row).value;
window.opener.populate(Batch);
window.close();
You have to call parent page function from child page.
No need to use common js.
If you want to access variable from parent page use
window.opener.<variable name>.
Example
window.opener.Toaccessinchildpage
You have to declare that variable as global variable in Parent page js file.
Refer First page code.
Regards,
Selva -
Values are not populated to backing session bean from editable table!
I have a table which has drop down list and checkbox columns. I binded table row group to an object list and binded selected properties of these columns to corresponding fields of object (#{currentRow.value['selected']}). However selected properties are not passed thru the backing bean. In action method i call the object.getSelected method and it always returns null. I am googling for 2 days but i could not find an obvious solution for this problem. please help! thanks in advance.
put your bean code here, for resoving your problem with implicit object,
-
Updated (VORowImpl ) values are not reflected in inline POPUP table
Hi Expert,
Currently i am getting exception when i try to update my iterator binding,
Here is my use case,
I have view object displayed inside the inline popup as a table. When i modify one of the cell i am firing the value change listener and it is called the ViewObjectRowImpl class method. Inside the method i do some computation (i am executing some DB query to get back some value). After the query execution i am updating the other columns data based on the changes.
First i have PPR the table and check out the update values. Unfortunately the change values are not reflected.
Then i used the following code
DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
if (itrBinding != null) {
itrBinding.executeQuery();
itrBinding.refresh(DCIteratorBinding.RANGESIZE_UNLIMITED);
Now i am getting the " JBO-25003: Object EmployeeMgmtAM of type ApplicationModule is not found."
May i know what went wrong? Am i missing anything. May i know how can i refresh the UI table based on the updated VORowImpl. Looking forward hints.
ThanksThanks Frank, Actually i am accessing the client method as follows,
DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
if (itrBinding != null) {
EmployeeVORowImpl employeeVO = (EmployeeVORowImpl)itrBinding.getCurrentRow();
empoyeeVO.methodName();
May i know what is the different between accessing the method as shown above and access via the MethodBinding?
How about access the attribute of the View object using the above approach? i.e empoyeeVO.getName() like ....
Also i have configure the ADF looger to finest level and found the primary reason to "Applicaiton module not found" was some entity validation. But this not always happened. Same test case works fine and fails sometimes. I am clueless. Could you please throw some light.
Thanks
Edited by: user1022639 on Feb 7, 2012 5:24 PM -
Created a trigger but new values are not inserting in the backup table
I have created a backup table and writter a trigger on a table such that after update old values and new values are to be inserted into the backup table, but new values are not inserting. I am giving the code please help me
create or replace trigger "SUPPQUOTES_AUDIT"
after update or delete on phsuppquotes for each row
begin
insert into phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values
(:new.cprc,:old.suppcode,:old.itemcode,:old.cprc,:old.negodt,:old.validdt,:old.userid,SYSDATE);
end;old values and new
values are to be inserted into the backup table, butwell you have only one insert there, inserting old values with a new id (which is ok if you don't update the id column, but I don't think that :new is available for deleting ops); you should have two inserts:
insert into
phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values (:old.cprc,:old.suppcode,:old.itemcode,:old.cprc,:old.negodt,:old.validdt,:old.userid,SYSDATE);
if (updating) then
insert into phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values (:new.cprc,:new.suppcode,:new.itemcode,:new.cprc,:new.negodt,:new.validdt,:new.userid,SYSDATE);
end if;
gojko adzic
http://gojko.net -
Why users are not able to see certain printers even though they are in the Airgroup server table
Q: Why users are not able to see only certain printers even though they are in the Airgroup server table ?
A: In certain scenarios we may notice printers come up under the server /cache entries on the controller.
However when an airgroup user does search for printer, they may not see all the printers, certain printers may be not visible .
This is because the service IDs sent by the user in the MDNS query are not broadcast by these printers
In the below capture the Ipad sends query for service id "_universal_sub_ipp_tcplocal" and "_universal_sub_ipps_tcplocal" and hence the controller will
respond with the printers that broadcasts these service ids.
Non–Visible printer :
_printer._tcp.local PTR IN 7200 10.125.30.223 5820.05 Wed Mar 18 13:24:26 2015
_pdl-datastream._tcp.local PTR IN 7200 10.125.30.223 6112.25 Wed Mar 18 13:24:26 2015
_ipp._tcp.local PTR IN 7200 10.125.30.223 5888.15 Wed Mar 18 13:24:26 2015
_http._tcp.local PTR IN 7200 10.125.30.223 6293.88 Wed Mar 18 13:24:26 2015
NPIED487E.local A IN 240 10.125.30.223 194.43 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local SRV/NBSTAT IN 240 10.125.30.223 209.87 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 205.14 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 197.18 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 196.42 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 208.15 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._pdl-datastream._tcp.local SRV/NBSTAT IN 240 10.125.30.223 207.35 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._pdl-datastream._tcp.local TXT IN 240 10.125.30.223 200.64 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._ipp._tcp.local SRV/NBSTAT IN 240 10.125.30.223 209.44 Wed Mar 18 13:24:26 2015
Visible-printer :
_printer._tcp.local PTR IN 4500 10.125.26.29 3745.82 Wed Mar 18 13:24:51 2015
_universal._sub._ipp._tcp.local PTR IN 4500 10.125.26.29 3694.14 Wed Mar 18 13:24:51 2015
_ipp._tcp.local PTR IN 4500 10.125.26.29 3628.81 Wed Mar 18 13:24:51 2015
_pdl-datastream._tcp.local PTR IN 4500 10.125.26.29 3616.14 Wed Mar 18 13:24:51 2015
_http._tcp.local PTR IN 4500 10.125.26.29 3793.56 Wed Mar 18 13:24:51 2015
XRX9C934E25C52D.local A IN 120 10.125.26.29 355.03 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._printer._tcp.local SRV/NBSTAT IN 120 10.125.26.29 130.45 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._printer._tcp.local TXT IN 4500 10.125.26.29 3670.33 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._ipp._tcp.local SRV/NBSTAT IN 120 10.125.26.29 389.55 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._ipp._tcp.local TXT IN 4500 10.125.26.29 3640.60 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._pdl-datastream._tcp.local SRV/NBSTAT IN 120 10.125.26.29 210.97 Wed Mar 18 13:24:51 2015
In order to learn other printers we may need to use specific app provided by printer vendor on the client or configure the printers to send these service IDs.The net 451 issues made it not work after a while but it affected the entire RWW site not just remote access:
http://blogs.technet.com/b/sbs/archive/2014/01/13/troubleshooting-an-unexpected-error-occurred-message-when-using-remote-web-access-to-connect-to-computers.aspx
Careful if you try and uninstall it, you'll need to put back net 4.0 and reconfigure some stuff.
Did it ever work?
Make sure the users have installed the certificate they need and turn on compatibility mode in IE (also make sure IE isn't locked down and disabling activeX).:
https://technet.microsoft.com/en-us/library/dd701173%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
-- Al -
Value are not coming (tcode cm50)
hi expert ,
in below code values are not comes into ITAB_TXTLINES ( WA_DATA ) . we use a standard program cm50 tcode . into
customize program memory but values is not coming into wa.
values(arbpl ,werks,kapar,planr)
this is my first time i use standard progarm
so plz help
REPORT ZPP_CM50 LINE-SIZE 170..
TYPE-POOLS : SLIS.
DATA : INT_CAT TYPE SLIS_FIELDCAT_ALV,
INT_FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : LS_LINE TYPE SLIS_LISTHEADER,
VN_TOP TYPE SLIS_T_LISTHEADER,
IT_SORT TYPE SLIS_T_SORTINFO_ALV,
WA_SORT LIKE LINE OF IT_SORT.
DATA : LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: BEGIN OF SLIST_LISTLINE,
LINE(1024) TYPE C,
END OF SLIST_LISTLINE.
DATA: ITAB_TXTLINES LIKE SLIST_LISTLINE OCCURS 0 WITH HEADER LINE.
TABLES : CRHD , KAKO .
DATA: BEGIN OF ITAB_DATA OCCURS 0,
AA(20),LEVEL(20),ITEM(20),OBJ(20),OBJID(20),
OBJDES(20),OVRFLW(20),QTY(20),UOM(20),ICT(20),
END OF ITAB_DATA.
DATA : WA_DATA LIKE ITAB_DATA.
DATA: TEXT TYPE C LENGTH 10,
RSPAR_TAB TYPE TABLE OF RSPARAMS,
RSPAR_LINE LIKE LINE OF RSPAR_TAB,
RANGE_TAB LIKE RANGE OF TEXT,
RANGE_LINE LIKE LINE OF RANGE_TAB.
*DATA: TEXT TYPE C LENGTH 10,
RSPAR_TAB TYPE TABLE OF RSPARAMS,
RSPAR_LINE LIKE LINE OF RSPAR_TAB.
RANGE_TAB LIKE RANGE OF TEXT,
RANGE_LINE LIKE LINE OF RANGE_TAB.
DATA : LIST_TAB TYPE TABLE OF ABAPLIST.
SELECTION-SCREEN : BEGIN OF BLOCK ABC WITH FRAME TITLE TLT.
SELECTION-SCREEN SKIP 1.
*SELECT-OPTIONS ARBPL FOR CRHD-ARBPL.
SELECT-OPTIONS WERKS FOR CRHD-WERKS.
SELECT-OPTIONS KAPAR FOR KAKO-KAPAR.
SELECT-OPTIONS PLANR FOR KAKO-PLANR.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN : END OF BLOCK ABC.
START-OF-SELECTION.
*RSPAR_LINE-SELNAME = 'TRUST_ID'.
RSPAR_LINE-KIND = 'P'.
RSPAR_LINE-LOW = 'RPF1'."'VD06011013'.
APPEND RSPAR_LINE TO RSPAR_TAB.
CLEAR RSPAR_LINE.
RSPAR_LINE-SELNAME = 'YEAR'.
RSPAR_LINE-KIND = 'P'.
RSPAR_LINE-LOW = '2009'.
APPEND RSPAR_LINE TO RSPAR_TAB.
CLEAR RSPAR_LINE.
RSPAR_LINE-SELNAME = 'REPONAME'.
RSPAR_LINE-KIND = 'P'.
RSPAR_LINE-LOW = 'FORM3A'.
APPEND RSPAR_LINE TO RSPAR_TAB.
CLEAR RSPAR_LINE.
SUBMIT RCCRY000 EXPORTING LIST TO MEMORY
USING SELECTION-SCREEN '1000'
WITH CRHARBPL-LOW EQ ARBPL
WITH CRHWERKS-LOW EQ WERKS
WITH KAKKAPAR-LOW EQ KAPAR
WITH KAKPLANR-LOW EQ PLANR
AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
LISTOBJECT = LIST_TAB
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
LIST_INDEX = -1
WITH_LINE_BREAK = ' '
TABLES
LISTASCI = ITAB_TXTLINES
LISTOBJECT = LIST_TAB
EXCEPTIONS
EMPTY_LIST = 1
LIST_INDEX_INVALID = 2
OTHERS = 3.
LOOP AT ITAB_TXTLINES . "from 5.
CLEAR WA_DATA.
SPLIT ITAB_TXTLINES AT '|' INTO: WA_DATA-AA
WA_DATA-LEVEL
WA_DATA-ITEM
WA_DATA-OBJ
WA_DATA-OBJID
WA_DATA-OBJDES
WA_DATA-OVRFLW
WA_DATA-QTY
WA_DATA-UOM
WA_DATA-ICT.
IF ITAB_TXTLINE-SY-INDEX .
then
DO 4 TIMES.
REPLACE '.' IN WA_DATA-LEVEL WITH SPACE.
ENDDO.
*DELETE ITAB_DATA-INDEX=1." WHERE WA_DATA = ITAB_DATA.
CONDENSE WA_DATA-LEVEL.
IF NOT WA_DATA-LEVEL IS INITIAL and not WA_DATA-LEVEL cp 'Emp*'.
APPEND WA_DATA TO ITAB_DATA.
ENDIF.
ENDIF.
ENDLOOP.
thanks.Hi,
CM50 is generated from CM10 main program for parameter 'M'. It generates it on the runtime and exports values into memory. It's less likely you will be able to generate the whole set into a Z Program.
I didn't find a function module to do so. But, with your consultants help you can create your own function module that gives results similar to CM50, it's merely calculation of capacity of workcenters for a period using the sales order booked against the work centers in that period. If you try a bit you can create it.
Good luck.
Also remember, before you post a code, use ... -
Purchase Order values are not reflecting in MIGO
Dear Experts,
I have changed standared Pricing Procedure from TAXINN to TAXINT because excise calculation was wrong. Now I have assinged new pricing procedure & reflecting in Purchase order & working as per requirement also.But when we are doing MIGO, excise values are not automatically coming in MIGO. So Is there any configuration or missing copy control because i have changed pricing procedure?
Also I want to put a check, if purchase order value is not matching with vendor invoice value then stores person can't do the MIGO.
Could any body guide me?
Thanks
TruptiHi,
It is not like that you have to mandatory use the TAXINN rather it is recommended by SAP to use but if some business requirement doesnu2019t meet up with what is recommended that its business call to go TAXINJ from TAXINN, but right now we don't know at what circumstances they moved to TAXINJ but question is what are the settings missing while moving from TAXINN to TAXINJ and because of that system is not picking the Tax Values at the time of MIGO in excise capture & posting.
So I have several questions in mind in order to understand your system behaviour.
1) Are you using the correct Tax code at PO level?
2) If using the correct Tax code then is't correct value maintained in FTXP for the Tax code used in PO.
3) If correct Value maintained in Tax code then by clicking on Taxes button mentioned under PO item level details are you able to see the correct value against each applicable condition type in next screen by clicking over Taxes button in PO?
4) if not then first check J1id - Material Chapter Id combination, vendor excise indicator mentioned, correct duties maintained in excise duty so check all master data related to CIN maintained in J1id
So first give answer to above mentioned questions then we procees further but I am sure I can make your system to picked the correct duties don't worry Just answer my questions hope things become fine in your system.
Best Regards,
Silky
Note: Please assign valuable points in order to encourage contributors to each answer to queries...
Maybe you are looking for
-
What's wrong with Boris 3D Text Generator.....
I've tried to use this tool but the clunky interface and 10 second delay while you open this up in it's own window drives me crazy. But I am trying again to use Boris 3D for subtitles. However, I just compared the text to FCP's text generator and Bor
-
My podcast doesn't open on Safari, but does on Firefox...
Hi. Sorry if this is explained somewhere else, but I couldn't find it. I'm building a personal website hosted on .Mac, in which i've include a podcast. The podcast was made on Garage Band, and exported to iWeb. I then upload the files to .Mac. Until
-
How to compare Apple Airport specs to "Wireless-G" and "Super-G" specs?
(and other faster specs) Specifically - is my builtin Airport Extreme "card" [405.1 (3.90.34.0.p18)] faster than just the "wireless-G" specs found in mass-market wireless routers (Linksys, d-link, Netgear, etc)? My previous wireless-G router got toas
-
External HD doesn't work.
My Mac Mini does not see my Hitachi XL1000 external hard drive. The drive does not appear in the Time Machine preferences, and even more ominously it does not appear in the list of drives in Disk Utility. I have been using it to back up two differe
-
Hello, We are executing a payment run. After payment run is executed a DME file is generated. But somehow not the file is not getting generated and we are getting the below error File C:\DME0347 cannot be opened. Message no. BFIBL02182. Please can so