Table declaration in Standard Program

Hi to all,
I just want to know that I have seen in the standard program the declaration of table in the following way.
TABLES: bkdf,
bkpf,
*bkpf.
then what is this *bkpf means.
Thanks
Dharmishta

hi ,
hope it useful for u..
the thing is it s like a work area for an table itself.. we dont want to define an work area for table (ekpo) like (wa_ekpo).. just we put *ekpo.. SAP internally make a work area of type the standard tab le.. here with i attach a piece of code...
tables: ekpo , *ekpo.
select single * from ekpo into *ekpo.
if sy-subrc eq 0.
write : / *ekpo-ebeln.
endif.
regards,
Karthik

Similar Messages

Modifying table control in standard program

Hi ,
Can any one tell me how to add a column in table control? My requirement is to add two columns ( custom fields ) into table control ( It is a standard program). I have added the column in the table and also in the table control. But when I am running the standard program, The newly added column is not there. But I have added in the perticular screen. Change is not reflected.
Actually in the standard screen totally 94 columns are there but where as when you run the program it is showing only 15 columns. can you tell me the reason?
I am working on Invoice payments F-28 screen 6102.
Can anyone help me on this please.

In the IMG (transaction SPRO), look at the path:
Financial Accounting
Accounts receivable and accounts payable
    Business transactions
      Incoming Invoices/Credit Memos
        Carry out and Check document settings.
There may be something there that will help.
Rob

Problem in changing the internal table contents of a standard program

Dear All,
I am making changes to internal table LT_PPDIT of standard program SAPLHRPT in the user exit EXIT_SAPLACC4_001 while payroll posting to accounting with tcode PC00_M99_CIPE. But though the changed value of LT_PPDIT is visible within the exit still the value of LT_PPDIT when we come outside exit is the same as what was before entering exit.
Please suggest is there any way of modifying internal table of a standard program in the user exit.
Regards,
Kanupriya

Hi,
I think the internal table is getting refreshed or something like that after the user exit.
Try debugging after the user exit and put breakpoints at clear and modify statements.
Then you ll find out where its regaining the oringinal value after getting changes.
After locating that point try finding some enhancmenent point there and including your code so that your value of internal able gets modified.
Regards,
Subhashini

Exporting An message Internal table to Standard program Internal Table

Hi,
In T-code VOFM, We have Goods issue routine 113, Now in Custmizing 913 is Configured. we are Checking the status of each handling unit of the Delivery. So I am getting the status Incomeplete Message for Multipe HU's. hence AM storing into One internal Table and Now I want To Export That Internal Table to Standard Program Internal Table 'WAT'.
If I raise

Elaborate your questions Please.

How to access a table of SAP standard SAP method from external program

Hi Friends,
I have to access a table and modified it defined in a standard SAP method (PROCESS_INPUT_FILTER) of class (CL_HANDLE_MM).
As we normaly do it in case of Standard program
for example: ('(SAPLMEPO)ett[]') here we are accessing internal table ett defined in SAPLMEPO.
so how we can do the same thing if some thing defined in standard SAP method.
Pl. help.

Thanks for the info guys, it will come in handy.
I need to validate that a number is entered with zero or one decimal place, then make sure it is evenly
divisible by .5 in order to test for whole or half numbers only. If not, I use an alert to
display a message when the user leaves the field.
If there is a better way to achieve this, I am all ears!
Thank you for your time,
Gary

How to fnd SAP STANDARD program of Database table

Hi to all,
Please can anybody tell me , how to find out SAP standard program of database Tables S070 (Breakdown Statistics).
As this table contain two filelds Time To Repair and Time Between Repair , i want to knew how the standard program for the table have calculate them.
i shall be thankfull to you for this.
Regards
Pavneet Rana

Hi,
Program for table is generated dynamically for each user ID, when ever you change the selection screen in SE16 or when you are executing the table entries for first time. Usually it starts with /1BCDWB/DB followed by table name. In your case it would be /1BCDWB/DBS070.
Go to Se16, enter your table name and click enter. Once you are in selection screen, goto Menu=>system=>Status. Here you can see the program name.
Thanks,
Vinod.

Write the syntax for declaring table control in dialog programming?

1) Write the syntax for declaring table control in dialog programming?
2) Write the syntax to call a selection screen in a modal dialog box?

hi,
check this code for table control.
DIALOG PROGRAMMING
TABLE CONTROL
IN SE51
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITVBAK WITH CONTROL TABCTRL. ## TABLE CONTROL NAME
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
LOOP AT ITVBAK.
ENDLOOP.
IN PAI FLOW LOGIC
PROGRAM YMODULE_PR4 .
TABLES : KNA1, VBAK.
DATA : BEGIN OF ITVBAK OCCURS 0,
       VBELN LIKE VBAK-VBELN,
       ERDAT LIKE VBAK-ERDAT,
       ERNAM LIKE VBAK-ERNAM,
       NETWR LIKE VBAK-NETWR,
       END OF ITVBAK.
CONTROLS : TABCTRL TYPE TABLEVIEW USING SCREEN '0100'.
TO ACTIVATE SCROLL BAR
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
    WHEN SPACE.
      SELECT VBELN ERDAT ERNAM NETWR
        FROM VBAK
        INTO TABLE ITVBAK
       WHERE KUNNR = KNA1-KUNNR.
      TABCTRL-LINES = SY-DBCNT.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module STATUS_0100 OUTPUT
      text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT

Calling the standard program in program and getting its output in int table

Hi there,
I have a requirement, where I need to call the standard program (of transaction CJI3) in my Y program. CJI3 transaction produces a ALV GRID output. I need to use that data for further processing. I am getting following problems:
1. I tried to use SUBMIT ... EXPORTING TO MEMORY statement. I need to pass the company code for the selection, but the company code is in the dynamic selection. So not getting how to pass them.
2. Just a doubt. Can we export the ALV GRID to the memory an retrieve it back using import?
3. I did tried to use SUBMIT ..... statement using only the parameters which are on the selection screen. However the control went to CJI3 transaction and gave an error message 'Please select "from database" or "from archive" '. Did not understood that, any IDEA?
Or is there any other way with which I can accomplish my requirement of getting the data in my program to manipulate, other than SUBMIT.
Points will be rewarded.
Thanks,
Ganesh Khumse

Hi,
point 1:
SUBMIT ... EXPORTING TO MEMORY will never work, because it displays the information in an ALV grid and that grid is waiting for user interaction for manipulating the information.
point 2:
no, you cannot export the content of an ALV grid to the memory
point 3:
must you get records in an internal table or must you feed the transaction, so that this one performs a task ?? for first option read below and for the other option you might work with BDC and Transaction Recorder.
what you have to do is read the code of transaction CJI3 in order to understand what it does, where the information is read from and what is the internal table that passes the values to the ALV Grid. You might find a user exit in the code for manipulating that information or you might create an enhancement point if there´s no user exit.

Standard program to display which tables are used by Webdynpro ABAP program

Hi Gurus,
I am working on a couple of enhancements in SAP Promotion Management for Retail (SAP PMR) which works on the principle of Floor Plan Management.
I was wondering if anyone would know of a standard program to display the tables used by Webdynpro ABAP?
(or)
Where can I get info of SAP Tables associated to SAP PMR?

Hi,
I am not aware of any standard reports that displays the tables.
If I have to view the tables, I would go to se80, give the package and view all the tables in the package.
Regards,
Daz.

How and where does SAP standard programs update the master tables...

Hello there,
How and where does SAP standard programs update the master tables...
to be precise.. if a (any) transaction occurs the programs behind it holds the data in temporary structures.
where and when does it get updated in the master table.
can anyone tell me how it happens?
I Know that from the where used list one can find the corresponding table but most of the time it wont suffice
I am expecting a proper answer.
Santosh B

Hello Santosh,
you need to do some self-reading on the following topic
Updates in the SAP System (BC-CST-UP)
http://help.sap.com/saphelp_47x200/helpdata/en/e5/de86e135cd11d3acb00000e83539c3/frameset.htm
Regards,
Siddhesh

Getting the internal table of standard program to my custom program

Hi All,
I have a requirement in which i have to get the data from internal table ALV_ITAB from program HKBRO20. As this is the standard program, i have copied this program into Z custom program and using export parameter i am getting the data from internal table ALV_ITAB to my custom program (Using submit of the Z of the standard program). Can any one pls tell me whether the process i am following is correct if not pls tell me how to get the internal table from standard program to our custom program.
the process i am following
submit ZHBRO20 and return. IMPORT ALV_ITAB FROM MEMORY ID 'ABC'.
copied HBRO20 to ZHBRO20.
Thanks,
Raju

Hi,
you could also try
FIELD-SYMBOLS: <fc> .
CONSTANTS: c_table(21) VALUE '(PROGRAM_NAME)INTERNAL_TABLENAME[]'.
ASSIIGN (c_table) TO <fc>.
Depends on the process, of course.
Cheers,
Stefan.

Error in ABAP Report TABLES declaration

Hi,
I am a Basis administrator and trying to write a small program for archiving.
I get a folowing error when user the following statement in a report -
TABLES: RSDAARCHREQ.
The error is as follows -
"RSDAARCHREQ" must be a flat structure. You cannot use internal tables,
strings, references, or structures as components. -
I can include all the other tables requred but somehow this particular table gives me this error which I have never encountered earlier. This is BI 7.0 and it is standard SAP transparent table.
Please help me.
I will appreciate it.
Regards,
Sume

Hi Sume,
Do not declare RSDAARCHREQ in tables.
If you want a internal table declare in the below mentioned way .
data: it_RSDAARCHREQ TYPE STANDARD TABLE OF RSDAARCHREQ.
select * into table
it_RSDAARCHREQ
from RSDAARCHREQ.
Regards
Naresh

DIFF: Field string ,Structure and Internal table declaration

Hai,
       what is the diference between Field string ,Structure in ABAP program and Internal table declaration and how it will work ?
Thank you
ASHOK KUMAR.

hi,
Look this u will get a good idea.
*& Report ZTYPES                                                      *
REPORT ZTYPES                                                  .
* Table declaration (old method)
DATA: BEGIN OF tab_ekpo OCCURS 0,             "itab with header line
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
END OF tab_ekpo.
*Table declaration (new method)     "USE THIS WAY!!!
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,      "itab
      wa_ekpo TYPE t_ekpo.                    "work area (header line)
* Build internal table and work area from existing internal table
DATA: it_datatab LIKE tab_ekpo OCCURS 0,      "old method
      wa_datatab LIKE LINE OF tab_ekpo.
* Build internal table and work area from existing internal table,
* adding additional fields
TYPES: BEGIN OF t_repdata.
        INCLUDE STRUCTURE tab_ekpo. "could include EKKO table itself!!
TYPES: bukrs TYPE ekpo-werks,
       bstyp TYPE ekpo-bukrs.
TYPES: END OF t_repdata.
DATA: it_repdata TYPE STANDARD TABLE OF t_repdata INITIAL SIZE 0,   "itab
      wa_repdata TYPE t_repdata.                 "work area (header line)
Regards
Reshma

Internal table declaration - work area and body

Hi all
I have declared my internal table in my program as
data : itab_wa type ZRESULT_LINE,
       itab    type ZRESULT_ROW.
Where ZRESULT_LINE and ZRESULT_ROW are the structure and table types.
Now I want to add
data: TCOLOR TYPE SLIS_T_SPECIALCOL_ALV.
in my internal table declaration. How can I do this. Please remember I need to have work area and body in my internal table as I have used work area and body in my code.
Waiting..............
Message was edited by: Raju Boda

HI,
See the Declarion types of workarea and Internal tables
* Table declaration (old method)
DATA: BEGIN OF tab_ekpo OCCURS 0,             "itab with header line
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
END OF tab_ekpo.
*Table declaration (new method)     "USE THIS WAY!!!
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,      "itab
      wa_ekpo TYPE t_ekpo.                    "work area (header line)
* Build internal table and work area from existing internal table
DATA: it_datatab LIKE tab_ekpo OCCURS 0,      "old method
      wa_datatab LIKE LINE OF tab_ekpo.
* Build internal table and work area from existing internal table,
* adding additional fields
TYPES: BEGIN OF t_repdata.
        INCLUDE STRUCTURE tab_ekpo. "could include EKKO table itself!!
TYPES: bukrs TYPE ekpo-werks,
       bstyp TYPE ekpo-bukrs.
TYPES: END OF t_repdata.
DATA: it_repdata TYPE STANDARD TABLE OF t_repdata INITIAL SIZE 0,   "itab
      wa_repdata TYPE t_repdata.                 "work area (header line
you need to maintain same structure for both workarea as well Internal table
Regards
Sudheer

Internal table declaration -OO ABAP

Hi,
          I am looking to declare an internal table using OO objects. My declaration are as follows..
TYPES : Begin of itab,
                     f1 type c,
                     f2 type c,
             End of itab.
DATA : itab1 type standard table of itab.
DATA: wa_tab type itab.
I have an internal table to say itab_pa2001 which i am reading all the records of pernr into ITAB_PA2001.To get the text i want to select * from t5*** into ..... Finally wht am looking is to move some of the fields into the final table ITAB. Could you please let me know how to set this up as i am getting wrong values when i am looping as below.
how to declare a structure in ITAB using ABAP OO....??
LOOP at ITAB_PA2001 into wa_itab.
ENDLOOP.
Thanks,
Vind

Hi,
Please refer to following links :
[How to declare an internal table in OO-ABAP programming? |Re: How to declare an internal table in OO-ABAP programming?;
[sample object oriented ABAP program |http://wiki.sdn.sap.com/wiki/display/Snippets/sampleobjectorientedABAPprogram]
Hope this helps.
Regards,
Chandravadan

Table declaration in Standard Program

Similar Messages

Maybe you are looking for