Table expanding horizontally causes new blank page

I have a report like that in the following picture:
The tablix expands horizontally at runtime  due to a couple of columns groupings. What I marked as "Extra blank space" must
be there, because otherwise the TextBox in the title where "Expr" appears will appear wrapped at runtime.
At runtime the tablix expands correctly and I sized the columns so that it will draw itself on just one complete page.
The issue is that I get additionally a second page, which is completely blank: I think this is due to the "Extra blank space", which, as explained, I cannot get rid of.
Maybe SSRS is not so clever as to remove this useless Extra blank space and fill it with the expanded tables.
Any suggestion is welcome. Regards
pg

Hi pg,
I can reproduce this issue when the textbox in the title is wider than the total length of the text and the page width. In this way, the second page is completely blank.
To fix this issue, we can narrow down both the title textbox and the report body width to fit the page width. Because when the total length of the title text is narrower than the page width, the extra space in the title textbox is not necessary. When the
total length of the text is wider than the page width, the extra text that exceed the page width would be wrapped, and displayed on the second page. So the "Extra blank space" is not necessary.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

  • Multiple Page flowed form with expandable field, causing a blank page

    I have a 3 page form with an expandable field on page 1.  I've set the pages up as flowable with positioned subforms and everything is working well, until you type a lot of info into the expandable field and it moves everything else in page 1 down to page 2, the problem appears after the text is moved, there is a huge blank space after the text that was moved.  Basically the rest of the information is moved to page 3 and then there is a page 4.  Hope this makes sense.
    Original - Page 1, Page 2, Page 3
    Expanded past the page - Page 1&2 (then big blank space), Page 3, Page 4
    I'd just like the pages to flow together so if the expanded box moves to the next page the sections just continue to follow without a huge blank space on page 2.

    It sounds as if some of your content is set to not allow page breaks within it.  Have you checked all containing sub forms for the option below?

  • "insert" "section" causes unwanted blank page for numbering

    I have a section/page numbering problem.
    I want to start page numbering on the 5th page (Chapter One). But.. when I insert a Section Break between the end of the TOC and first Chapter (where I want re-numbering to start) it causes a blank page to be inserted after the TOC and before the section break...
    How do I insert a section break between TOC and Heading that's set to "start new page" without getting blank page?

    Thanks I've got your file and have fixed it. It had to do with the way you constructed it.
    This is how to do what I did after I deleted your existing T.O.C.:
    1 click at foot of Title page > Menu > Insert > Section Break
    2 Type "Table of Contents" return > Menu > Insert > Table of Contents
    3 Menu > Insert > Section Break
    If there is a return at the beginning of the Introduction page just delete it.
    I also tidied up your layout a bit and have emailed it back.
    Peter

  • When I click on a picture to enlarge it on a web page ( any webpage),a new blank page opens with nothing.It only syas search bookmarks and history.What do I have to do to view an enlarged view says

    Using Firefox to search a web page.
    When I click on a picture to enlarge it on a web page ( any webpage),a new blank page opens with nothing.It only says" search bookmarks and history".
    What do I have to do to view an enlarged view ? What settings do i have to enable in firefox.
    Any help would be appreciated
    Colincolin30

    See:
    * [[Images or animations do not show]]
    * http://kb.mozillazine.org/Images_or_animations_do_not_load
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • How can i open a new blank page, if i open a new tab??

    how can i open a new blank page, if i open a new tab?? because if i click the plus "+" sign(at right corner) it open a website that i don't like.... please help meee....

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • When i try to print a perfect bound for my 66-paged document it keeps creating two new blank pages

    When i try to print a perfect bound for my 66-paged document it keeps creating two new blank pages, how do i remove that 2 blank pages?

    That is essentially a 2 up format as shown.
    2 pages duplex will equate to 4 pages per sheet.
    Your document needs to be divisable by 4. Add two blank pages at the end of your document.
    Toggle "Print Blank Pages" from the Print Settings
    Remove the blanks after creating the booklet.

  • I click on a link, get a new blank page, not the info expected. Use AVG Free Ed, Windows 7 professional.

    I click on a link, and get a new blank page, not the info expected. I use AVG Free Edition, Windows 7 Professional. I have tried "open link in new tab" - no joy. Not all links are affected. It is not possible to say when a link is going to fail or work - it seems random.
    == This happened ==
    Every time Firefox opened
    == It just started to happen about 2 weeks ago

    I get the address as it should be as in attachment when I hover over the "FLIXTER" add on the right of screen. When I click it just comes out in a new window but BLANK. Open in IE then shows me the correct view. Puzzling. I have tried disapbling ans enabling java script in my options and sometimes this works then sometimes not??

  • Missing? : File- New- Blank Page- Page type (CSS)- Layout is empty!!

    Hello-
    I am just learning Dreamweaver CS3 and I'm wondering if something has gone missing on my installation, or if this is how it's supposed to work...
    If I do File -> New -> Blank Page (then choose CSS in the Page Type window pane) ...  I then find there are no items in the Layout pane for CSS (whereas, under HTML and some others there are lists of items, though others, such as XML, in the list do have items listed.  In all, I think about 1/2 are empty, 1/2 are populated)
    I've attached a screen shot to clarify this!
    Is CSS supposed to be empty, or has something gone missing?  I have the book "Dreamweaver CS3 The Missing Manual" but don't find this referenced.
    Thanks for the help!
    -Ron

    ron_on_adobe wrote:
    Z-
    So, if I understand correctly, the CSS "blank pages" will only become populated as I begin to create CSS styles, and it's normal for this to be an empty pane until then?
    You are correct, there is nothing inside of that pane and no, nothing will populate that window, even if you do create css styles  :-)
    When you create a stylesheet, it will be listed in the CSS panel on the right of the working document, it will not go into that CSS pane at all.
    Good to see you looking 'under the hood', it means you are willing to learn everything you can about Dreamweaver.
    Nadia
    Adobe® Community Expert : Dreamweaver
    http://www.perrelink.com.au
    Unique CSS Templates |Tutorials |SEO Articles
    http://www.DreamweaverResources.com
    http://csstemplates.com.au/
    http://twitter.com/nadiap

  • Recently when creating a new blank page, application freezes. have been using for years without a problem. Upgrade?

    recently when creating a new blank page, application freezes. have been using for years without a problem. Upgrade?

    When something that used to work stops doing so, the most likely culprit is corrupt preferences. Go to HD > Users > (your account) > Library > Preferences, delete the com.apple.iwork.pages.plist file & then restart Pages. In Finder, hold down the Option key while clicking on the Go menu & your user Library will appear about halfway down the list. Or you can choose Go to Folder from the Go menu in Finder & paste this line in the box:
    ~/Library/Preferences

  • Why does caps lock on every time I open new blank page

    Every time I open a new blank page, the Capitalization switches on. It doesnt happen with the other pages I choose. Just the blank document page. This annoying habit continues as I start a new line, and sometimes the underline and Bold format pops on also. I have to keep going into the format header and keep switching them off. After a lot of experimenting, I believe this malfunction is what is screwing up my uploads to the web, by messing with the script. Has anyone encountered this problem or know how to fix it? It only happens with the darkroom template blank page which is the one that my site is built with. I've tried clearing the cache, rebooting ect.
    Message was edited by: kelly12
    Message was edited by: kelly12

    The first two text boxes in the Darkroom page are all caps. But any new text box will be both upper and lower case. It's designed that way. If you want to use lower case then delete those boxes and add new ones in their place.
    You can try reinstalling iWeb but I don't think it will help. I'm on a new iMac and that's how the Darkroom theme works on all the pages. The top text box and the next one down.
    OT

  • How to create a new blank page in iStore module

    Hello ,
    How to go about creating a new blank page in a iStore minisite in Oracle EBS.
    Is there a template that can be used to create a page containing JSP tags needed by iStore.
    Thanks

    Hello ,
    How to go about creating a new blank page in a iStore minisite in Oracle EBS.
    Is there a template that can be used to create a page containing JSP tags needed by iStore.
    Thanks

  • Ever since I updated my ipad to iOS 7, I am unable to bring up a new, blank page.  Can someone tell me how?

    Why, once I updated my ipad to iOS 7, am I unable to bring up a new, blank page?

    A new blank page where?  In Pages, in Numbers, in some text editor?

  • HELP! Full size image is creating a new blank page that I cannot delete.

    Hello,
    I am creating a document where each page has a full size (8.5x11) image that is set to the background. I then have text over the background image. My problem is that when I make the background image and insert another page, I get a blank page that I cannot get rid of. I have made sure that the full size image is not going over the border but it is still creating an invisable character that is a blue line with an icon at the end.
    How can I get rid of this line??
    To insert the large inage, I am creating a square shape and extending it to the edge of the document. I am then filling that shape with an image.
    PLEASE HELP!!!
    Thank you in advance!
    V

    Nevermind! I found the answer!! I had to un-check Object To Wrap in the Inspector.

  • Email address lincs in Firefox pages do not activate gmail program. Get a new blank page instead

    Using Firefox 3.6.13 on a Macbook Pro, OSX 10.5.8. and Gmail
    Find a web page with a clickable email address and want to send an email. Click on the address. Firefox opens a new "untitled" window. It is blank. No anything. Gmail does not load even though it has been open in another window. Same thing happens if Gmail is not active before clicking.
    TIA,
    Ron

    What webmail service are you using?

  • When on e bay if I try to enlarge a picture Firefox opens a new blank page. I cannot enlarge the picture.

    When I'm on e bay and there is a picture of the item I'm looking at if I click on the enlarge picture option firefox will open a new window and the top of the window says "search bookmarks and history" How do I stop this happening so I can look at the pictures?

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

Maybe you are looking for

  • Error on registering Flights of Fancy application(Partner Application, JPDK) provide

    Hi When i try to add a provider for Flights of Fancy application i am getting this error An error occurred when attempting to call the providers register function. (WWC-43134) The following error occurred during the call to Web provider: Unable to in

  • CLD: timer expressi VI or my own functional global VI?

    Hi all, I'm preparing for CLD exam. I had a look to preparation kit exercises and a couple of exam samples. It seems that exam often requires the use of a Timer (a simple timer or a "pausable" timer). In order to save time during CLD exam,may I use t

  • Back up for Nokia C3-01.5

    I am new to Nokia Suite. I have recently backed up my phone. When i went into word to view it i found it unreadable. Can anyone please tell be how i can read it? I have enclosed attachment.

  • Your submission could not be processed because the token has expired. Please reload the window.

    Your submission could not be processed because the token has expired. Please reload the window. This is an error that is very common on message boards, and only seems to happen fore firefox...people on chrome, IE, etc don't seem to get it. This error

  • ICal won't launch after 10.5.2 upgrade

    my iCal won't launch after 10.5.2 upgrade. it won't even give an "unexpectedly quit" message, it pops up then quits, then nothing. This happened immediately after the upgrade today. I got the leopard disc out and did an archive and install then it wo