Table field for PO releaser in R/3 (4.7 Enterprise)

Hi Gurus out there:
Do you know if there is a table field for PO releaser in R/3 (4.7 Enterprise)?
We use for e.g. the transaction ME29N to release a PO and I haven't been able to find a DB table where the PO releaser is stored.
In DB table EKKO I can find the fields FRGGR (Release group), FRGSX (Release strategy), FRGKE (Release Indicator), FRGZU (Release status) and FRGRL (Release Not Yet Completely Effected) but no information of the user who released the PO.
Many thanks in advance.
/hw

Meanwhile I have found a solution to this problem:
CONCATENATE sy-mandt <ekko-ebeln> INTO tabkey.
SELECT SINGLE * FROM cdpos
WHERE objectclas = 'EINKBELEG'
AND objectid = <ekko-ebeln>
AND tabname = 'EKKO'
AND tabkey = tabkey
AND fname = 'FRGKE'
AND chngind = 'U'
AND value_new = '1'. " PO has been released
IF sy-subrc = 0.
SELECT SINGLE username
FROM cdhdr
INTO po_releaser
WHERE objectclas = 'EINKBELEG'
AND objectid = oitab-ebeln
AND changenr = cdpos-changenr.
ENDIF.

Similar Messages

  • What is the table field for PO releaser in R/3 (4.7 Enterprise)?

    Hi Gurus out there:
    Do you know if there is a table field for PO releaser in R/3 (4.7 Enterprise)?
    We use for e.g. the transaction ME29N to release a PO and I haven't been able to find a DB table where the PO releaser is stored.
    In DB table EKKO I can find the fields FRGGR (Release group), FRGSX (Release strategy), FRGKE (Release Indicator), FRGZU (Release status) and FRGRL (Release Not Yet Completely Effected) but no information of the user who released the PO.
    Many thanks in advance.
    /hw

    Hi
    <b>Have you tried reading the details of the PO Releaser using the BAPIs ?</b>
    BAPI_PO_GETRELINFO
    BAPI_PO_GETITEMSREL
    BAPI_PO_GETITEMSREL            List Purchase Orders for Release (Approval): New as of 4.0A     
    BAPI_PO_GETRELINFO             Display Detailed Release (Approval) Information on Purchase Order
    BAPI_PO_RELEASE                Release Purchase Orders            
    BAPI_PO_RESET_RELEASE          Cancel Release of Purchase Orders  
    <u>Related link -></u>
    Re: How to fetch data from back end for PO?
    Hope this will help.
    Do let me know.
    Regards
    - Atul

  • Table Field for total value release in Contract agreements

    Hi Gurus,
    Please tell me the table field for release in contract agreements. It is showing a structure field RM06E-GSABW, which does not have any associated table.
    Please let me know if any other way to get the same information.
    Thanks,
    Shibaji.

    Hi Shibaji,
    you may try in the respective delivery LIPS-NETWR. Or check the where-used-list of data element NETWR.
    Regards,
    Clemens

  • Incomplete Control Deliveries add new table-field for Incompleteness Proced

    Incompletion Control for Deliveries add a new table-field for Incompleteness Procedure G (Delivery header)
    Hello,
    I'm trying to add a new field for Incompleteness Procedure G (Delivery header), but  when I try to customize the procedure G with new fields, I donu2019t find the field that I need  ModeOfTrnsprt-Border (EIKP-EXPVZ).
    Foreign Trade/Customs tables are not included like an option for new entries in the customizing of Incompleteness Procedure G, and Iu2019ve to prevent that users save the outbound delivery without entry a valid value for  EIKP-EXPVZ (EIKP-EXPVZ= ModeOfTrnsprt-Border).
    Otherwise, when users are creating the SD Invoice there is an error for create the Accounting document because Foreign Trade/Customs information is incomplete.
    So Iu2019d like to know If is possible to add a new tables ( and fields)  to use in the customizing for Incompleteness Procedure for Outbound Deliveries (procedure G).
    Thanks!!
    Edited by: Ariana Serrano Aguila on Sep 2, 2010 5:19 PM

    Hello,
    I'm trying to add a new field for Incompleteness Procedure G (Delivery header)
    , but when I try to customize the procedure G with new fields, I donu2019t find the
    field that I need ModeOfTrnsprt-Border (EIKP-EXPVZ).
    See as far as the table is concerned, the basic reason why it is not getting populated as SAP stores the possible values at the domain level. So i think the right approach to add the table would be to get access key for the domain and then add the new table name at domain level. Please reach out for help from ABAPer in this matter.
    You can also use User exit to met this requirement and the appropriate user exit will be as below:
    1.MV50AFZL
    2. MV50AFZ1
    Regards,
    Sarthak

  • TABLE/FIELD FOR SALES ORDER'S SHIP TO LOCATION

    Hi everyone,
    Does anyone tell me what is the related tables/fields for Sales Order's Ship To Location? Since I want to display the Ship To Location information in the Oracle Report in Oracle Apps R11i.
    I tried to use the following SQL select statement to retrieve the Ship to address:-
    -- SHIP TO LOCATION
    select a.address_id, c.customer_name, C.CUSTOMER_ID, A.SITE_USE_ID from ra_Site_uses_all a, ra_addresses_all b, ra_customers c
    where a.site_use_code = 'SHIP_TO' and
    a.status = 'A' and
         b.address_id = a.address_id and
         c.CUSTOMER_ID = b.CUSTOMER_ID and
         b.status = 'A' and
         c.customer_id in (select customer_id from ra_customers) and
         c.status = 'A' and
         c.customer_name like 'CLARION (H.K.)%'
    But I found that the data is BILL TO address. Can anyone help me? Thanks.

    Hi all, I managed to solve my problem. Here's the query in case someone need it. Thanks
    SELECT party.party_name "Send to" (SELECT party.party_name
    FROM hz_cust_site_uses_all bill_su,
    hz_cust_acct_sites_all bill_cas,
    hz_party_sites bill_ps,
    hz_locations bill_loc,
    hz_parties party,
    oe_order_headers_all h
    WHERE h.invoice_to_org_id = bill_su.site_use_id
    AND bill_su.cust_acct_site_id = bill_cas.cust_acct_site_id
    AND bill_cas.party_site_id = bill_ps.party_site_id
    AND bill_loc.location_id = bill_ps.location_id
    AND bill_cas.party_site_id = bill_ps.party_site_id
    AND bill_ps.party_id = party.party_id
    AND h.order_number = 'your_order_number') "Invoice to"
    FROM oe_order_headers_all h,
    hz_cust_site_uses_all ship_su,
    hz_cust_acct_sites_all ship_cas,
    hz_party_sites ship_ps,
    hz_locations ship_loc,
    hz_parties party
    WHERE h.ship_to_org_id = ship_su.site_use_id
    AND ship_cas.party_site_id = ship_ps.party_site_id
    AND ship_su.cust_acct_site_id = ship_cas.cust_acct_site_id
    AND ship_cas.party_site_id = ship_ps.party_site_id
    AND ship_ps.party_id = party.party_id
    AND ship_loc.location_id = ship_ps.location_id
    AND h.order_number = 'your_order_number';

  • Table field for status of the network.

    hi
    i have to create the report in which i have delete the records  that have release status,this status is in tcode CN23 or CN22, but i am not able to find a field for same.
    Thanks

    Hi Khushi,
    Table Name - CAUFVD
    Field Name - AUFNR
    Search Help - AUKO
    Hope this helps.
    Regards,
    Sai

  • Table and table field for PICKING QUANTITY.

    Hi friends,
           I need to use PICKING QTY in script. but it is in structure LIPSD-PIKMG.
    Please say Table and Field for Picking quantity.
    I need a table and field.
    THANKS in advance.
    balaji.

    Hi Tarani, Rasmi,
    Thank you for quick response.
          LIPS-LFIMG is Delivery Qty . It is not Picking Qty.
    please let me know for PICKING QTY to display in my Script.
    Thank you.

  • Find Table Field  for  Q0045-OPELO in HR Payroll

    Dear All,
      I have a requirement to find the Loan Balance as on date from Infotype 0045.
    In the screen field it show that data is  linked to  this table field...   Q0045-OPELO .
    Now My Problem is how To find the  Database table Name where exactlly the amount value store and i can use that fro my report to  calculate the  Loan Balance for required Employee.
    Its urgent..........
    Regards
    Lakhan

    Hi Lakhan,
    The loan balance amount is not stored in the database table. It is instead stored against WT /LLB in the payroll cluster table PCL2. If you want to retrieve this amount, then you have to use a macro to select the payroll results for the period you are running the report and then select the RT table.
    The /LLB entry (if exists) in the RT table will hold the loan balance amount.
    Hope this helps.
    -Akshay
    Edited by: Akshay Patil on Dec 26, 2007 3:51 PM

  • Transparent table field for Tax Indicator on Material Master

    I am trying to find the transparent table which holds the Tax indicator field for material in the purchasing view of a material master. Usually it has values - 0,1. Where is this field stored ? I am unable to locate it. I looked into CDPOS..It points to DMLAN. But that is a structure..
    TAXIM is the field ( Tax Ind. f. Material). I need to retrieve this field for a report).

    Hi,
    The country is got based on the plant...you can get the country from T001W for the corresponding plant.
    Thanks
    Naren

  • Dynamic table field for filtering a selection criteria

    Hi Friends
    I am using a table a981 and fetching data in internal table but the table has a fieil Country whose technical name is ALAND in dev and LAND1 in production.Now i cannot use LAND1 as it wont let me to activate the report and if i use ALAND i cannot move the request to production as it fails. So how can i achive dynamic table field in the select query based on server.My query is-
        select kschl
               wkreg
               matnr
               knumh
       from a981 into corresponding fields of table it_a981
       for all entries in it_marc where matnr = it_marc-matnr
                                    and kschl in ('MWST','ZSER')
                                    and aland = 'IN'
                                    and datab le sy-datum
                                    and datbi ge sy-datum.
    I need to make aland dynamic.Pls suggest

    Hi,
    this forum is for the BusinessObjects Integration Kit for SAP but I don't see how you entry is related to it.
    Ingo

  • QM-Customer Info record-QV51(Need Table & field for - "Before delivery" -)

    Hi friends,
    In the qm Customer info record(qv51), there are 3 radio buttons under quality inspection field-(Before delivery,After delivery,By customer).. I am checking the table " QVDM" .I am able to locate the fields (1.After delivery,and 2.By customer ) .
    But I couldn't locate the field for " Before delivery" in the table QVDM.  1. Is it in some other table ? 2. If it is so, in which table I can find the field for " Before delivery" ? Help me.
    Regards,
    Mani

    By default system assumes before delivery unless one of the indicators "After delviery" or "By Customer" is set.
    There is no specific indicator for "Before Delivery"
    FF

  • Table fields for the text editors

    Hi,
    How to find the table fields of the text editors in the functional screens like MM03 --> MRP4 View --> Material Memo. Or how to upload text in the editors using ABAP program.
    Thanks,
    K R Vishnu Kumar

    Hi,
    Any long text will consists of the TEXT_NAME, TEXT_ID, TEXT_OBJECT and the LANGUAGE.
    To find out these details you basically have to open the text in the text editor by double clicking on it.
    And then go to the Header details in the Menu.
    Here you will find all the relevant information.
    You pass these details to FM SAVE_TEXT to save this text to database and you make use of FM READ_TEXT to read these texts.
    The texts are basically stored in STXH and STXL tables.
    Regards,
    Ankur Parab

  • Table & Field for VAT

    Hi All,
    I have requirement to print VAT amount in PO, can anybody tell me the table & field where i can find VAT stored.
    Regards
    Ashok

    Hi,
    I dont have access to SAP right now so would not be able to tell you in detail.
    VAT field is STCEG dont remember exactly which table you can try LFA1, KNA1 or you can try to search with Where Used List button in SE11.
    In the form i believe there is logic problem, Have you applied any logic on the first page to trigger the second page or just at the end of 1st page the 2nd page is supposed to trigger?
    Regards,
    Rohit

  • Table fields for Status of an equipment.

    Hi Experts,
    Can anyone tell me Tables and fields available for Status of an equipment. Which is shown in IE03.
    i.e. 'INST','AVLB'......etc.
    Thanks,
    Ashesh Chokhawala.

    hi,
    u can check in these tables
    equi,
             itob,
             viaufks,
             viqmel,
             jest,
             t001w,
             eqkt,
             t001,
             aufk,
             imptt,
             imrg,
             auak,
             afko,
             afvc,
             crhd,
             coss,
             resb,
             makt,
             eban,
             ekbe,
             tj02t,
             afih,
             qmel,
             hikola,
             pmco.

  • PO mass maintenance: additional table/fields for EKET

    Dear Friends,
    I am finding a way to help my users with mass po maintenance. They would like to use t-code: memasspo to change the delivery dates in multiple POs.
    But I found this t-code only support two tables: massekko and massekpo and Function module:
    ME_LIMIT_FIELDS_PO_BAPI  only allows fields from these two tables. But the delivery date field is from Table EKET which is not listed for BUS2012 in t-code: MASSOBJ.
    Can anyone help me with this issue ? I wish to use MEMASSPO to change delivery date from EKET.
    Thank you!
    Jack

    Hi,
    You can use alternate options Lsmw /BDC program.
    LSMW-http://help.sap.com/saphelp_nw04s/helpdata/en/87/f3ae74e68111d1b3ff006094b944c8/content.htm
    BDC-Give the t-code shdb in the command field.
    Click the new recording button. Give a name to the recording and the t-code you want to record.
    Regards,
    Sandesh Sawant

Maybe you are looking for

  • I updated Imovie and now it crashes, I haven´t been able to start it.  Does any one know how to solve it? please.

    Hi I will really apreciate your help. I have try all I have seen posted. 1) unistal/install again imove 2) Verify and Restore all disk permitions. 3) I dont Have the 3ivx file.  only the 2 files that should be in the quicktime folder. 4) I have move.

  • Spellcheck not working/options missing.

    I recently updated to 20 and my spellcheck context menu has vanished. What if you aren't even given the check spelling or languages menu option yet the broken red line under mispelled words occurs and no spelling suggestions made when right clicking

  • Empty entry in table of contents

    I have created a couple of table of contents recently and in every instance they added a blank entry at the end.  In most cases this is OK as I can either delete it or simply force the entry to be overset but I'd prefer it not be created at all.  Has

  • Problems with extrenal drive after upgrade to Lion

    Hello, after upgrading to Lion last week I am experiencing some problems with my LaCie 1 TB FireWire (800) external drive. The problem is not that big however. When I delete files on the external drive they do not appear in the Trash Bin. However whe

  • EDI for Consolidated Invoice

    Hi All, We have a requirement to send EDI to customer who are on Consolidated Invoice. I have used standard SAP Idoc Type INVOIC02 with message type INVOIC. I used the Output type RD01 and then created a Consolidated Invoice. The problem is the segme