Table for Object IDs

Hi
Can anyone pls suggest whats the Table for Object IDs of Vendor Organisation get stored.
Regards
--Vikas

Hi
Please refer to the tables
BUT000
BUT020
VENMAP
For a particular vendor, you can get the details refer to the following Funstion modules as well.
BBP_PARTNER_GET_PURCH_DATA
BBP_PARTNER_GET_DATA
BBP_PARTNER_ADDRESS_GET_COMPL
BBP_PARTNER_DETERMINE_ADDRESS
Regards
- Atul

Similar Messages

Archiving Object - Entry missing in Customizing table for object Z*********

Hello friends,
We have created a archiving object in transaction AOBJ. However when i enter this object in SARA, we get this error message.
"Entry missing in Customizing table for object Z******* "
I have matched my object with few other archiving objects and things looks similar.
Have you faced this kind of problem..
thanks
ashish

Hi,
I checked and i can see entry for ZSCS_TRAFO object in AOBJ.
But when i enter ZSCS_TRAFO, i get this error :
Entry missing in Customizing table for object ZSCS_TRAFO
Message no. BA057
Diagnosis
A function cannot be executed due to a missing table entry.
Procedure
Please create an entry for the archive object ZSCS_TRAFO with the AOBJ transaction.
However, a few other Z objects works well.
thanks
ashish

Table for object links.

Hi,
Please provide the table for object links in cprojects and also the tables relevant for cprojects.
Thanks,
Varghese

DPR_OBJLINK                    Object Links
DPR_OBL_CATEGORY               Category for Object Types of Object Links
DPR_OBL_OBTYP                  Characteristics of Object Link to Object Type
DRAD                           Document-Object Link
TDWO                           Document Management Object Link
TDWOT                          Texts for Object Links in Document Management
Check these tables.
Regards
vijay

Table for object type

Hi,
Can anyone give me the table(s) for the workflow object type. I want to use the object type as a select-option instead of using the tasks that are part of the object type. I couldn't find anything in the SDN workflow forum.
Thanks,
John

Hi,
What is a workflow object type?
Pressing F1 and then technical infomation on an SAP workflow screen is usually enough to find the underlying check tables etc.
Kind regards, Rob Dielemans

Table for objects linked to item via external link

Hi Gurus,
We link objects to an item, like PS projects and networks using link to external object. Doing so which table in backend will get updated with this transaction data.
We want to draw data from backend to find a list of items to which objects like PS projects and networks are linked.
Reagrds,
Ansar

RPM_OBJ_LINK

Need help with SQL Query (query for certain IDs in a table and then IDs not in result set)

OK. This is hard to explain but that may be my problem in constructing the query.
I have a table that has a list of jobs. The jobs information in this table, among other things, is a short description of the job itself (think "title" in phrase form), date, and ID.
So I can query the table to get all the jobs for a particular grouping of IDs (the only ones I am interested in) that ran successfully for a given time period. But what I want are all the jobs that did not succeed (or therefore are not present in the table) for this group of jobs and for a certain date range. But these are not the only job id's in the table.
To get the successful ones I do the following:
SELECT id,short_desc FROM my_table where
            id IN('1230', '1231', '1232', '1239', '1244', '1245',
            '1246', '1247', '1248', '1272', '1280', '1281', '1282',
            '1283', '1284', '1285', '1286', '1249', '1250', '1251',
            '1252', '1253', '1255', '1233', '1234', '1235', '1236',
            '1237', '1238', '1256', '1257','1258', '1254', '1290','1310')
            AND the_date > = SYSDATE - 23/24
            AND to_char(the_date, 'DD-MON-YYYY') = TO_CHAR(CURRENT_DATE, 'DD-MON-YYYY')
I have tried to use another AND clause with NOT IN and the group or NOT EXISTS but that doesn't work as there are other jobs captured in this table with id's of course. I am only concerned with these id's:
IN('1230', '1231', '1232', '1239', '1244', '1245',
            '1246', '1247', '1248', '1272', '1280', '1281', '1282',
            '1283', '1284', '1285', '1286', '1249', '1250', '1251',
            '1252', '1253', '1255', '1233', '1234', '1235', '1236',
            '1237', '1238', '1256', '1257','1258', '1254', '1290','1310')
Someone said to use a temp table. I don't think I have permission and I haven't tried as I want to do this in one query if possible.
After thinking about this I am at a loss. I tried to do this in the front end but it just became too messy.

You do not need a physical temp table. You need an in-line view:
WITH list as (
              SELECT '1230' id FROM DUAL UNION ALL
              SELECT '1231' FROM DUAL UNION ALL
              SELECT '1232' FROM DUAL UNION ALL
              SELECT '1239' FROM DUAL UNION ALL
              SELECT '1244' FROM DUAL UNION ALL
              SELECT '1245' FROM DUAL UNION ALL
              SELECT '1246' FROM DUAL UNION ALL
              SELECT '1247' FROM DUAL UNION ALL
              SELECT '1248' FROM DUAL UNION ALL
              SELECT '1272' FROM DUAL UNION ALL
              SELECT '1280' FROM DUAL UNION ALL
              SELECT '1281' FROM DUAL UNION ALL
              SELECT '1282' FROM DUAL UNION ALL
              SELECT '1283' FROM DUAL UNION ALL
              SELECT '1284' FROM DUAL UNION ALL
              SELECT '1285' FROM DUAL UNION ALL
              SELECT '1286' FROM DUAL UNION ALL
              SELECT '1249' FROM DUAL UNION ALL
              SELECT '1250' FROM DUAL UNION ALL
              SELECT '1251' FROM DUAL UNION ALL
              SELECT '1252' FROM DUAL UNION ALL
              SELECT '1253' FROM DUAL UNION ALL
              SELECT '1255' FROM DUAL UNION ALL
              SELECT '1233' FROM DUAL UNION ALL
              SELECT '1234' FROM DUAL UNION ALL
              SELECT '1235' FROM DUAL UNION ALL
              SELECT '1236' FROM DUAL UNION ALL
              SELECT '1237' FROM DUAL UNION ALL
              SELECT '1238' FROM DUAL UNION ALL
              SELECT '1256' FROM DUAL UNION ALL
              SELECT '1257' FROM DUAL UNION ALL
              SELECT '1258' FROM DUAL UNION ALL
              SELECT '1254' FROM DUAL UNION ALL
              SELECT '1290' FROM DUAL UNION ALL
              SELECT '1310' FROM DUAL
SELECT l.id,
        nvl(short_desc,'This job failed') short_desc
FROM      my_table m
WHERE RIGTH JOIN
            list
          ON (
                  m.id = l.id
              AND
                  the_date > = SYSDATE - 23/24
              AND
                  the_date < TRUNC(SYSDATE) + 1
SY.

How to get the object class field value in CDHDR table for vendor

hi
how to get the object class field value in CDHDR table for vendor

Try KRED/KRED_N as object class in CDHDR for Vendor.

How to put parameter for object/table ID in BW Web Report

Hi All,
In my BW Web report, i want to get my object TABLE_1 but the code below seems not to work.
var mytable = document.getElementsByTagName("table");
Checking on it, i think IE recognize only document.getElementsByID. ( I tested it by manually creating a table in my template and putting a tag for table ID) But BW does not generate the Object ID in the parameters below, only the name.
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="TABLE_1"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="GENERATE_CAPTION" value=""/>
         <param name="CAPTION" value="jezel"/>
         <param name="ONLY_HIERARCHY_NAVIGATION" value="X"/>
         <param name="BLOCK_SIZE" value="0"/>
         <param name="SHOW_PAGING_AREA_BOTTOM" value=""/>
         ITEM:            TABLE_1
do you know how i can add a parameter for object ID? do you know any steps how i can retrieve my table using javascript?
Thanks in advance.

Hi JTi,
what i have understood from your requirement is that you want to access the web item table_1 in javascript, you can get that as below:
Add
<span>
tag before your web item and set its id to table.
<span id = "table">
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="GET_ITEM"/>
<param name="NAME" value="TABLE_1"/>
<param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
<param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
<param name="GENERATE_CAPTION" value=""/>
<param name="CAPTION" value="jezel"/>
<param name="ONLY_HIERARCHY_NAVIGATION" value="X"/>
<param name="BLOCK_SIZE" value="0"/>
<param name="SHOW_PAGING_AREA_BOTTOM" value=""/>
ITEM: TABLE_1
</span>
In javascript access it as :
var mytable = document.getElementsById("table");
Hope this helps
Thanks
Dipika

Table for User Parameter IDs

Hi All,
Does anyone know the Table for User Parameter IDs?
Thanks in Advance

Hi Duke,
USR01                          User master record (runtime data)
USR02                          Logon data
USR03                          User address data
USR04                          User master authorizations
USR05                          User Master Parameter ID
Regards,
Ashok

Need an help to maintain catalog structure for objects parts,defects,causes,activities and coding in one z table

Hi Experts,
I am trying to create a z table with the same fields repeating for the development in PM module.
I want to have Catalog structure (Catalog,Code group,Code) for objects parts,defects,causes,activities and coding in one z table.Firstly I have created these fields by selecting it from QPCD table.Then as I want the same functionality as it is in IW21 (PM Notification) I created the fields by referring to VIQMFE, VIQMUR , VIQMEL and VIQMMA as in IW21.
1) However, I am not able to maintain the values.Once I select catalog structure for object parts and then when I am selecting it for defects the search help is still taking the object parts value in it and not allowing me to get the relevant data and also to maintain the data.
I feel the problem is of check table as all the fields are referring to the same check tables TQ15 , QPGR and QPCD but I am not getting the exact solution.
Please find attach the screen shot of the table I have created and also the error I am getting while maintaining the values.
Please do the needful.
With Regards,
Sonali Deshmukh

Hi All...
I got the solution.
Thank You.
With Regards,
Sonali Deshmukh

Problem occured when create a tree table for master-detail view objects using SQL queries?

I am programming a tree table for master-detail view objects using SQL queries and these 2 view objects are not simple singel tables queries, and 2 complex SQL are prepared for master and view objects. see below:
1. Master View object (key attribute is SourceBlock and some varaible bindings are used for this view object.)
SELECT cntr_list.SOURCE_BLOCK,
        sum(
         case when cntr_list.cntr_size_q = '20'
              then cntr_list.cntr_qty
              else 0 end ) as cntr20 ,
        sum(
         case when cntr_list.cntr_size_q = '40'
              then cntr_list.cntr_qty
              else 0 end ) as cntr40 ,
         sum(
         case when cntr_list.cntr_size_q = '45'
              then cntr_list.cntr_qty
              else 0 end ) as cntr45
FROM (
    SELECT yb1.BLOCK_M as SOURCE_BLOCK,
           scn.CNTR_SIZE_Q,
           count(scn.CNTR_SIZE_Q) AS cntr_qty
    FROM SHIFT_CMR scm, SHIFT_CNTR scn, YARD_BLOCK yb1, YARD_BLOCK yb2
    WHERE
    scm.cmr_n = scn.cmr_n
    AND (scm.plan_start_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS')
    OR scm.plan_end_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS'))
    AND scm.shift_mode_c = :ShiftModeCode
    AND scm.end_terminal_c = :TerminalCode
    AND scm.start_terminal_c = yb1.terminal_c
    AND scm.start_block_n = yb1.block_n
    AND substr(scn.start_location_c,(instr(scn.start_location_c,',',1,5)+1),instr(scn.start_location_c,',',1,6)-(instr(scn.start_location_c,',',1,5)+1)) BETWEEN yb1.slot_from_n AND yb1.slot_to_n
    AND scm.end_terminal_c = yb2.terminal_c
    AND scm.end_block_n = yb2.block_n
    AND substr(scn.end_location_c,(instr(scn.end_location_c,',',1,5)+1),instr(scn.end_location_c,',',1,6)-(instr(scn.end_location_c,',',1,5)+1)) BETWEEN yb2.slot_from_n AND yb2.slot_to_n
    AND scn.status_c not in (1, 11)
    AND scn.shift_type_c = 'V'
    AND scn.source_c = 'S'
    GROUP BY yb1.BLOCK_M, scn.CNTR_SIZE_Q
) cntr_list
GROUP BY cntr_list.SOURCE_BLOCK
2. Detail View object (key attributes are SourceBlock and EndBlock and same varaible bindings are used for this view object.)
SELECT cntr_list.SOURCE_BLOCK, cntr_list.END_BLOCK,
        sum(
         case when cntr_list.cntr_size_q = '20'
              then cntr_list.cntr_qty
              else 0 end ) as cntr20 ,
        sum(
         case when cntr_list.cntr_size_q = '40'
              then cntr_list.cntr_qty
              else 0 end ) as cntr40 ,
         sum(
         case when cntr_list.cntr_size_q = '45'
              then cntr_list.cntr_qty
              else 0 end ) as cntr45
FROM (
    SELECT yb1.BLOCK_M as SOURCE_BLOCK,
           yb2.BLOCK_M as END_BLOCK,
           scn.CNTR_SIZE_Q,
           count(scn.CNTR_SIZE_Q) AS cntr_qty
    FROM SHIFT_CMR scm, SHIFT_CNTR scn, YARD_BLOCK yb1, YARD_BLOCK yb2
    WHERE
    scm.cmr_n = scn.cmr_n
    AND (scm.plan_start_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS')
    OR scm.plan_end_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS'))
    AND scm.shift_mode_c = :ShiftModeCode
    AND scm.end_terminal_c = :TerminalCode
    AND scm.start_terminal_c = yb1.terminal_c
    AND scm.start_block_n = yb1.block_n
    AND substr(scn.start_location_c,(instr(scn.start_location_c,',',1,5)+1),instr(scn.start_location_c,',',1,6)-(instr(scn.start_location_c,',',1,5)+1)) BETWEEN yb1.slot_from_n AND yb1.slot_to_n
    AND scm.end_terminal_c = yb2.terminal_c
    AND scm.end_block_n = yb2.block_n
    AND substr(scn.end_location_c,(instr(scn.end_location_c,',',1,5)+1),instr(scn.end_location_c,',',1,6)-(instr(scn.end_location_c,',',1,5)+1)) BETWEEN yb2.slot_from_n AND yb2.slot_to_n
    AND scn.status_c not in (1, 11)
    AND scn.shift_type_c = 'V'
    AND scn.source_c = 'S'
    GROUP BY yb1.BLOCK_M, yb2.BLOCK_M, scn.CNTR_SIZE_Q
) cntr_list
GROUP BY cntr_list.SOURCE_BLOCK, cntr_list.END_BLOCK
3. I create a view link to create master-detail relationship for these 2 view objects.
masterview.SourceBlock (1)->detailview.SourceBlock (*).
4. I create a tree table using these 2 view objects with master-detail relationship.
When I set default value for variable bindings of these 2 view objects and the matching records exist, tree table can work well. I can expand the master row to display detail row in UI.
But I need to pass in dymamic parameter value for variable bindings of these 2 view objects, tree table cannnot work again. when I expand the master row and no detail row are displayed in UI.
I am sure that I pass in correct parameter value for master/detail view objects and matching records exist.
Managed Bean:
        DCIteratorBinding dc = (DCIteratorBinding)evaluteEL("#{bindings.MasterView1Iterator}");
        ViewObject vo = dc.getViewObject();
        System.out.println("Before MasterView1Iterator vo.getEstimatedRowCount()="+ vo.getEstimatedRowCount());
        System.out.println("Before MasterView1Iterator ShiftModeCode="+ vo.ensureVariableManager().getVariableValue("ShiftModeCode"));
        vo.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
        vo.ensureVariableManager().setVariableValue("DateTo", dateTo);
        vo.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
        vo.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
        vo.executeQuery();
        System.out.println("MasterView1Iterator vo.getEstimatedRowCount()="+ vo.getEstimatedRowCount());
        DCIteratorBinding dc1 = (DCIteratorBinding)evaluteEL("#{bindings.DetailView1Iterator}");
        ViewObject vo1 = dc1.getViewObject();
        System.out.println("Before DetailView1Iterator vo1.getEstimatedRowCount()="+ vo1.getEstimatedRowCount());
        System.out.println("Before DetailView1Iterator ShiftModeCode="+ vo1.ensureVariableManager().getVariableValue("ShiftModeCode"));
        vo1.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
        vo1.ensureVariableManager().setVariableValue("DateTo", dateTo);
        vo1.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
        vo1.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
        vo1.executeQuery();
        System.out.println("after DetailView1Iterator vo1.getEstimatedRowCount()="+ vo1.getEstimatedRowCount());
5. What's wrong in my implementation? I don't have no problem to implement such a tree table if using simple master-detail tables view object, but now I have to use such 2 view objects using complex SQL for my requirement and variable bindings are necessary for detail view object although I also think a bit strange by myself.

Hi Frank,
Thank you and it can work.
public void setLowHighSalaryRangeForDetailEmployeesAccessorViewObject(Number lowSalary,
                                                                          Number highSalary) {
        Row r = getCurrentRow();
        if (r != null) {
            RowSet rs = (RowSet)r.getAttribute("EmpView");
            if (rs != null) {
                ViewObject accessorVO = rs.getViewObject();
                accessorVO.setNamedWhereClauseParam("LowSalary", lowSalary);
                accessorVO.setNamedWhereClauseParam("HighSalary", highSalary);
            executeQuery();
but I have a quesiton in this way. in code snippet, it is first getting current row of current master VO to determine if update variables value of detail VO. in my case, current row is possibly null after executeQuery() of master VO and I have to change current row manually like below.
any idea?
            DCIteratorBinding dc = (DCIteratorBinding)ADFUtil.evaluateEL("#{bindings.SSForecastSourceBlockView1Iterator}");
            ViewObject vo = dc.getViewObject();
            vo.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
            vo.ensureVariableManager().setVariableValue("DateTo", dateTo);
            vo.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
            vo.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
            vo.executeQuery();
            vo.setCurrentRowAtRangeIndex(0);
            ((SSForecastSourceBlockViewImpl)vo).synchornizeAccessorVOVariableValues();

Configuring profile parameter for a table lock object

Hi Experts-
I want to set the 'wait time' (_WAIT) parameter as a profile parameter for a table lock object.
I have created a lock object on a ZTable. I lock and unlock this object in exclusive non-cumulative mode through the enqueue and dequeue lock object function modules. These generated FMs are invoked via my custom function module.
My function module will run in the background as a scheduled task in R/3. I execute the Enqueue FM at the start of the FM and keep the table locked until the last step finishes in my FM and then I Dequeue it. I want to have the processing wait and retry the Enqueuring FM at set intervals in case the one run doesn't finish entirely and a new run of this same job kicks off.
Thank you,
- Vik.

Set the wait parameter = 'X'. These means that if it encounters a lock, then it will wait a certain time for the lock to be released. This certain time is a system value set by your basis team. I don't imagine it being a very long time.
CALL FUNCTION 'ENQUEUE_EZPIPHYINVREF'
       EXPORTING
            MODE_ZPIPHYINVREF = 'E'
            MANDT             = SY-MANDT
            _WAIT             = 'X'.
Regards,
Rich Heilman

How to find tables for a particular business object.

Dear Friends,
I want to display, all the tables related to a particular business object.
So I think there must be way of doing it using packages.
example:-
I will have list of all packages referencing to all business Components
(ex.SALES) then i will get a list of all the tables related to SALES and then I would like to get all the METADATA regarding that TABLE.
please give me some ideas How to achieve this.
thanks,
jeevan

hai Naveen ,
Thanks for the reply.
I had gone through the Link.
I want to know "How could I get the list of all the Tables of a particular Business Component"
like suppose i entered Sales i sould get all the tables related to Sales ....if MM then list of MM tables...
in Se80 the package VA is for sales .....
and there i can get all the tables for sales...
but If u know any searching criteria by which i will be able to the list of tables.
thx,
jeevan

Table for info objects

Hi Experts,
I have lot of info objects descrption. and i want to find out technical names for all these, is there any specific table for this?
Thanks
David

Hi David,
Check out the below tables
RSDIOBJ                  Directory of all InfoObjects
RSDIOBJT                Texts of InfoObjects
RSDIOBJ                     Directory of all InfoObjects
RSDIOBJT               Texts of InfoObjects
RSDATRNAV          Navigation Attributes
RSDATRNAVT        Navigation Attributes
check out the below link
http://zodano.wordpress.com/2009/01/16/sap-bw-tables/
Regards,
Venkatesh

Message no. B1402- Table KONP for object class COND_A is not defined.

Hi
I m using BD52 transaction for message type COND_A and am getting this error for table KONP saying it is not defined for COND_A.
Can you please let me know which transaction is used to update this information.
Thanks in advance
Sana

In note 309342, for error message no.B1402, following solution is given.
Solution
The system issues warning message B1402 " Table KONP for object class COND_A does not exist" for each entry with table KONP and you can ignore this by pressing Enter respectively. Then you can maintain the entries or navigate.
If the KONP entries bother you since you use Transaction BD52 frequently, you can remove them manually. To do this, you can also use Transaction BD52. The functions are not changed by this deletion. However, the issue of the bothering warning message is suppressed. Table TBD62 is client-dependent that is, you have to make the correction on each active client.
A related problem exists with table TBD22. During the setup of reductions (that is, new output types which only send a subset of the data of output type COND_A), the corresponding entries in table TBD62 (Transaction BD52) are generated from table TBD22. To avoid the same problem as described above with the new output types, remove the entries of TBD22 with MESTYP COND_Y and CDTABNAME KONP. You can do this with the help of view V_TBD. Transaction SM30, as an output type, select COND_A. Here, remove all entries with segment type EKONP and table name KONP.
Table TBD22 is client-independent.
A correction of tables TBD22 and TBD62 by means of an R/3 Support Package is not possible since the tables have delivery classe 'G'. SAP cannot delete entries in the tables.
thanks
G. Lakshmipathi

Table for Object IDs

Similar Messages

Maybe you are looking for