Table for User Name and User ID?

Hi Experts,
I hv User ID, that Logs in. So, I waanna to pull the corresponding Name.
So,
Wher Can I find these data i.e. Which is the best Table/source?
ThanQ.

Yo ucan alternatively use SUSR_USER_ADDRESS_READ.
The exporting parameter user_address would have the full name of the user in the field name_text.
    DATA: user_address LIKE addr3_val.
    CALL FUNCTION 'SUSR_USER_ADDRESS_READ'
      EXPORTING
        user_name                    = sy-uname
*       READ_DB_DIRECTLY             = ' '
      IMPORTING
        user_address                 = user_address
*       USER_USR03                   =
      EXCEPTIONS
        user_address_not_found       = 1
        OTHERS                       = 2.
    IF sy-subrc = 0.
       write:/ user_address-name_text.
    ENDIF.

Similar Messages

NPS: Override User-Name and User Identity Attribute

After configuring NPS and using http://technet.microsoft.com/en-us/library/dd197535%28WS.10%29.aspx it's possible to authenticate based on MAC Addresses.
Is it by design that all authentication requests handled, are changed to MAC Address Authentication?
We want to have three Network Access Policies, two based on Active Directory Account, one based on MAC Address.
After entering the registry values and rebooting the server, it's only possible to authenticate based on MAC Address.
Do we need seperate NPS servers, one for MAC based authentication and one for A.D. account authentication?
Thank you in advance.

Hi GerardVU4,
Thank you for your post.
Is it by design that all authentication requests handled, are changed to MAC Address Authentication?
To always use the MAC address as the user identity, on the NPS server set the Override User-Name registry value to 1.
If you set Override User-Name to 1 and the User Identity Attribute to 31, the authenticating server can perform
only Automatic Number Identification/Calling Line Identification (ANI/CLI)-based authentication. Normal authentication by using authentication protocols, such as Microsoft Challenge Handshake Authentication Protocol (MS-CHAP) and Extensible
Authentication Protocol (EAP), is disabled.
So please remove Override User-Name registry entry on your NPS server first.
Do we need separate NPS servers, one for MAC based authentication and one for A.D. account authentication?
No, you could set up three Network Access Policies on same NPS server.
Network Access Policies based on MAC Address, just select Authentication Methods PAP in policy Constraints TAB.
Network Access Policies based on Active Directory Account, Keep the default Authentication Methods MS-CHAP-v2& MS-CHAP.
If there are more inquiries on this issue, please feel free to let us know.
Regards,
Rick Tan

Tables for Qurey names and cube

hi,
I want to know the list cubes against each query.
can any one tell me what are tables for the folllowing
1) to get list generic queries avalible .?
2) cube against each of that query?
3) Data source against each cube?
4) generic web templates against each query?
regards
Laxman

Hi Olin,
RSZELTDIR: filter by: OBJVERS = 'A', DEFTP: REP - query, CKF - Calculated key figureReporting component elements, query, variable, structure, formula, etc
RSZELTTXT: Similar to RSZELTDIR.
Texts of reporting component elementsTo get a list of query elements built on that cube:RSZELTXREF:
filter by: OBJVERS = 'A', INFOCUBE= [cubename]
To get all queries of a cube:RSRREPDIR: filter by: OBJVERS = 'A', INFOCUBE= [cubename]To get query change status (version, last changed by, owner) of a cube:RSZCOMPDIR: OBJVERS = 'A' .
Web templates
RSZWOBJ - Storage of the Web Objects
RSZWOBJTXT - Texts for Templates/Items/Views
RSZWOBJXREF - Structure of the BW Objects in a Template
RSZWTEMPLATE - Header Table for BW HTML Templates
Regards
KP

AppleScript: Waiting for a user to enter user name and password

I'm currently working on an AppleScript designed to automate binding a computer to Active Directory and another script to install a login certificate. While you can create a UNIX shell script for the Active Directory binding, I found that you have to have your user name and password in the script itself and this system will be deployed by multiple people.
So instead I'm doing an GUI Automation AppleScript of Directory Utility. What I'd like to do is have the script to wait for the admin user (who will be remoting in by ARD) to enter their Network user and password, click okay and then continue the script to quit the program and then run a self-destruct (which I'd also appreciate any advice about doing in AppleScript)
Here's the script so far, which I've set up successfully:
activate application "Directory Utility"
tell application "System Events"
click text field 1 of row 1 of table 1 of scroll area 1 of group 1 of group 1 of window "Directory Utility" of application process "Directory Utility"
click button 1 of group 1 of group 1 of window "Directory Utility" of application process "Directory Utility"
click text field 2 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
keystroke "EXAMPLE.COMPANY.com"
click UI element 3 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click radio button "Administrative" of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click checkbox "Allow administration by:" of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click button 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click row 1 of table 1 of scroll area 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
keystroke "GroupExamplePS NA"
click button 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click row 2 of table 1 of scroll area 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
keystroke "GroupExampleNA"
click button 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click row 3 of table 1 of scroll area 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
keystroke "GroupExampleNATemps"
click button 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click row 4 of table 1 of scroll area 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
keystroke "GroupExampleTeam 1"
click button 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click row 5 of table 1 of scroll area 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
keystroke "GroupExampleTeam 2"
click button 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click row 6 of table 1 of scroll area 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
keystroke "GroupExampleTeam 3"
click button 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click row 7 of table 1 of scroll area 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
keystroke "GroupExampleDesktop Admins"
click button 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
click row 8 of table 1 of scroll area 1 of tab group 1 of sheet 1 of window "Directory Utility" of application process "Directory Utility"
keystroke "GroupExampleDomain Admins"
click button "Bind…" of sheet 1 of window "Directory Utility" of application process "Directory Utility
<<WAIT LINE HERE FOR NETWORK ADMIN AND AND PASS, THEN USER WILL CLICK OKAY, THEN CONTINUE SCRIPT>>
<<QUIT ACTIVE DIRECTORY>>
<<SELF-DESTRUCT>>
end tell
It isn't a real command prompt like if you're changing System Preferences or something. It's a specialized prompt specifically for Directory Utility. However, I do need to know how to make AppleScript wait for a password for a standard Password Prompt for adding a certificate to the login keychain through Keychain Access. I've also done pretty much the same thing as above for that script.
Any tips would be GREATLY appreciated.

Yeah, I know GUI Scripting is not the best way, but I couldn't find a successful variable system for the following script. The other issue is that I'd prefer to send this by ARD and have ARD ask for a User Name and Password, but I've found there's no way to do that. Then again, I can't send the AppleScript purely remotely either.
What I mean by self-destruct is simply I only want the Active Directory binding script to run once upon login to the primary admin user and then delete itself so it doesn't get run again. The login certificate script I want to run once on each new user who logs in (so I'll likely be putting it in the "User Template") and then delete itself so it doesn't run the next time they log in. I can't figure out any way to hit those buttons through a shell script.
Here's the original UNIX shell script: (This is what I'm using temporarily until I figure out a solution that doesn't require my user name and password to be embedded)
#! /bin/bash
MACNAME=$(scutil --get ComputerName)
dsconfigad -add "CORP.DOMAIN.NET" \
-username USER \
-password PASS \
-computer $MACNAME \
-mobile disable \
-mobileconfirm disable \
-localhome enable \
-useuncpath enable \
-shell /bin/bash \
-ou OU=Macs,CN=Computers,DC=corp,DC=DOMAIN,DC=net \
-force \
-localpassword "PASSWORD" \
-groups "GROUPS"
And here is the Certificate Installation AppleScript
activate application "Keychain Access"
tell application "Finder" to open POSIX file "/FolderName/Certificate.crt"
delay (3)
tell application "System Events" to tell process "Keychain Access"
click button "Add" of window "Add Certificates"
click button "Always Trust" of group 3 of sheet 1 of window "Keychain Access"
end tell
Thanks for the help. I really appreciate it. This is a rather new field for me and most of my knowledge comes from Google Searches and about a billion tabs trying to find answers.

Table contain user name and tcode

Dear Experts,
Can you tell me which Table contained user name and tcode field?
Thanks and Best regards,
wilson

You need to be even more carefull with parameter transactions.
If SU24 is not maintained for them, PFCG will pull the proposals from the core transaction (via which the parameters are used in the skip screen feature...). If the core transaction has authority proposals for S_TCODE, then you will get those tcodes and their proposals as well.
A carefull choice of menu objects (not only limited to Tcodes), taking heed of SU24 defaults and tuning it to meet your needs is the key. But it requires organizational discipline and good training, otherwise rather dont use it for anything other than important objects which you want to control manually only, even if your business roles are a mess.
You can also restrict the authorizations of the security admins for example (as unpopular as that may sound... to segregate authorization concept development (SU24 etc), role building development (PFCG etc) and user administration (SU01 etc). Object S_USER_TCD also has a field called TCD...
There are also other objects (as Dipanjan has pointed out) which have TCD as a field of an object which is not S_TCODE. In addition to I_TCODE, Q_TCODE, P_TCODE, see also S_IDOCMONI for example.
To be honest I have given up on trying to find them all
The easiest solution is to use the menu and maintain SU24 when the transaction is configured or the application is developed and tested. That is what SAP does as well in SU22. It is more work upfront, but more sustainable in the long run.
If your users (and auditors) only see the menu (and use the SUIM --> Executable transactions) options, then you can get away with it in the short or even medium term. Latest when someone else need to maintain the roles they will hate it...
My 2 cents,
Julius

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
Have you tried deletting the plists for MAS?
This page might help you out...
http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
Let me know how you get on?
Thanks.

I am locked out of my phone. Asking for a google user name and password? I don't know what it is!

I am locked out of my phone. Asking for a google user name and password? I don't know what it is!

http://techobar.blogspot.com/2012/11/unlocking-lock-pattern-after-too-many.html
Or this site.
http://about-google-android.blogspot.com/2013/04/how-to-unlock-android-phone-when-forgot.html

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Firefox will not save my user name and password for one of my sites. How can I fix this problem. It is getting annoying having to reenter every time I check this site. Is there a solution.

I had my user name and password saved for my library site. My grandson hit something and now the saved user name and password are gone. It asks me every time to enter it and it is getting annoying. How do I fix this. I want Firefox to remember these codes.

You can create a bookmark with the JavaScript code via a right-click on the "Remember Password" link on the squarefree.com website and choose "Bookmark This Link" and select the "Bookmarks Toolbar" as the destination folder for easy access.
* https://www.squarefree.com/bookmarklets/forms.html#remember_password
You need to use the "Remember Password" bookmarklet before or after filling the name and password field on the website with the <u>login form</u>, but before submitting the login form by clicking a button on the web page.
If the site is using autocomplete="off" then you see a number not equal to 0 (i.e. attributes were removed) in the pop-up alert from the bookmarklet and Firefox should offer to remember the name and password via a drop down dialog of the key icon that will appear on the location bar (Firefox 4+) or via an info bar at the top (Firefox 3).

Time Capsule won't accept my user name and password for access - Help!

Hi all,
My Time Capsule seemed to stop working one day and I had to do a hard reset with the little button at the back. After that it worked and I restored my wireless network settings but now I can't access the Time Capsules hard drive with Time Machine.
When I try to choose it as my Backup Disk in the Time Machine preferences it says "Enter your user name and password so Time Machine can access the file server "Our Time Capsule" (the name of my time capsule). However, every time I try to enter my password I get "Sorry, you entered an invalid username or password".
I've already tried several resets of the Time Capsule and I've also tried logging on my computer as the Root user and changing my administrator account password back and forth but no go.
Help! and Thanks.

Norman & Harry,
Consider the following:
*_Time Capsule Keeps Asking Me For a Password_*
It will be important to know what is going on, or what you are doing when it asks for the password. Is it asking for a password only when Time Machine attempts a backup? Consider this:
It is NOT your username and password it wants when you try accessing the Time Capsule. (I know... it SAYS "username and password") But it means the Time Capsule's Name and Password.
You will find that by launching Airport Utility.
Select the TC on the left.
Click "Manual Setup".
Click the "Time Capsule" Tab.
You will see "Time Capsule Name:" and "Time Capsule Password".
Make sure “Remember password in keychain" is checked.
That is the information you need to enter when it asks for "username & password."
*I Don’t Remember What My Time Capsule Password Is*
You can see what your current TC password is by going into Keychain.
Open your Keychain and select "login" from the Keychains pane in the top left. Highlight "Passwords" in the Category pane from the lower left.
Sort all the items by Kind. Note everything labeled "Airport...". How many do you have listed? There should only be one "Airport base station password" for each base station that you have active. Also, there should only be one "Airport network password" for each network you have created. If there are more than these, then delete all but the ones with the most recent Modification date.
To see what passwords are being stored, double-click your Time Capsules' entry. A new window will appear.
Put a check beside "Show Password". You may be asked for your own Admin password so enter that.
Now the Password field will display the password you entered into Airport Utility for your Time Capsule
*It Still Won’t Accept the TC Name and Password*
Launch Airport Utility --> Manual Setup.
Select "Disks" in the tool bar above.
Click the "File Sharing" tab.
Is "File Sharing" checked? It should be.
What is selected beside "Secure Shared Disks"? If it says "With Accounts" or "With a Disk Password" then the system will ask you for a password every time it mounts the TC hard disk. If you switch it to "With Time Capsule Password" then use the password you designated earlier in the “Time Capsule" tab. It should only ask you once and then never again - because you had checked "Remember password in keychain".
If you have made any changes then click "Update".
Let us know if this resolves your issue.
Cheers!

HT204053 I did not know my kids had set up an Itunes account for me with one user name and password. then i got an i phone and set it up with a different email address and new password. how can i get my accounts to merge so i can have all of my music on

I did not know my kids had set up an Itunes account for me with one user name and password. then i got an i phone and set it up with a different email address and new password. how can i get my accounts to merge so i can have all of my music on my iphone

Quote: "You cannot merge two or more Apple IDs into a single one. You can, however, use one Apple ID for iCloud services and another Apple ID for store purchases (including iTunes in the Cloud and iTunes Match). See “Using one Apple ID for iCloud and a different Apple ID for Store Purchases” above for details." See also Apple ID & iCloud FAQ: http://support.apple.com/kb/HT4895?viewlocale=en_US&locale=en_US
You can set up your iCloud account on your iOS device under: "Settings > iCloud" and a other account for store purchases under "Settings > iTunes & App Stores". Unfortunately merging accounts is not possible but you could transfer all of your music manually via iTunes from your Mac or PC.

HT1386 How do I create one Apple ID and iTunes user name and password for all of my Apple products: iPad, iPhone, and iPod plus iTunes on my PC?

How do I create one Apple ID and iTunes user name and password for all of my Apple products: iPad, iPhone, and iPod plus iTunes on my PC?

Yes, I do have multiple devices and it appeared to me that every time I tried to sync or log onto iTunes, the password was incorrect. Consequently, I was and am constantly changing it. Wouldn't it be nice if Apple would simply say that you only need one Apple ID and one password regardless of the number of Apple devices you intend to sync via iTunes.
Barring the above, how about a way to merge all of the Apple IDs and passwords into one.

I use a program called RoboForm2Go that will fill in user names and passwords for me when I open a site and now that option is not available in the taskbar at the top. How can I use that feature again?

I save the RoboForm2Go program on a flash drive and when I opened a site that I had saved the user name and password, the RoboForm2Go would show up in the taskbar with the site I opened so I could just click on it and it would automatically fill in the info for me.

Under View>/toolbars, I don't have an option to choose RoboForm Toolbar. When I initially set up the program, I was using Internet Explorer and I can go to the taskbar at the bottom and choose RoboForm but then whatever site I was opening in Firefox will now open in Internet Explorer instead of Firefox. The old version of Firefox would display the RoboForm toolbar at the top.

What is the default user name and password for oracle databse 10g

Hi: gurus, I just recently installed the oracle 10g personal edition and trying to log on to the enterprise manger, but can't figure it out the user name and password, can some one help me and tell me what is the default user name and password to logon to the oracle instance. BTW during the installation I choose two passowrds one for the schema and one for the global database orcl. I wonder will I be using one of these passwords. Still I don't have any clue for the "User Name".
thanks

system/manager and sys/change_on_install are still valid default passwords when database is manually created. If DBCA was used, passwords will be those defined at creation time inside DBCA.
In case passwords have been forgotten, those can be reset:
From an OS commnad prompt, set ORACLE_SID, ORACLE_HOME and PATH environment variables, just to make sure you are pointing to the right Oracle Home installation, and issue:
OS> sqlplus / as sysdba
SQL> alter user sys identified by yourNewSysPassword;
SQL> alter user system identified by yourNewSystemPassword;
And you're done with it.
HR Madrid

After updating to iOS 8 my iPad 2 does not keep my user name and password for isp start page

After updating to iOS 8 my i pad 2 does not store the user name and password for my earthlink start page. In past could go to bookmark and the start
page would automatically come up. Now I must enter the user name and password every time to access the personalized start page. tried to find some settings that needed changing but no luck. is this a problem with iOS 8 Earthlink referred me to apple they could not help any help here

Hello nkrlw,
It may be that AutoFill is disabled in Safari, or that Private Browsing is on.
Go to Settings > Safari > Passwords & AutoFill and make sure that Names and Passwords is on.
Go to your Home screen and open Safari. If Safari is black or dark instead of white or gray, Private Browsing is on. Safari doesn't save account names and passwords when Private Browsing is on. To turn off Private Browsing:
On iPad, tap the the plus icon in the upper-right corner of the Safari page, then tap Private in the lower-left corner.
On iPhone and iPod touch, tap in the lower-right corner of the Safari page, then tap Private in the lower-left corner.
Get help using iCloud Keychain
http://support.apple.com/kb/TS4644
Cheers,
Allen

Table for User Name and User ID?

Similar Messages

Maybe you are looking for