Table in scrolling sidebar does not display in Preview

I pasted a table into the scrolling sidebar widget, it see the table fine in iBooks Author, can edit it and everything. I send a preview to my iPad and the whole widget appears as a blank but if I scroll through, I do see a scroll bar so the widget is not empty, but the content is invisible. I do see the content while the page is loading and in the table of contents when the page appears as an icon.

Thanks ssprengel. There seems now to be two different 'full screen' modes. Pressing the Shift and F keys changes what you see. I'm used to only pressing the F key. Now I am able to view the side bars, as well as the top and bottom bars, when I wish. However, maybe a bug, maybe not, the right bar does not come into view when the curser hovers over the left hand side. The three other side bars, top, left and bottom, do become visible when curser hovers over the respective areas. Thanks to your help this is no longer as important an issue (for me at least). In the Window menue you have the Screen Mode which gives you all the options. Thanks again.

Similar Messages

Sidebar does not display when in Develop module

Issues with the sidebars in Develop module such as when hovering mouse over left or right on screen does not make sidebar show. Also, when in full screen mode the sidebars seem to have been completely disabled. Have just upgraded from LR 3 to 5.

Thanks ssprengel. There seems now to be two different 'full screen' modes. Pressing the Shift and F keys changes what you see. I'm used to only pressing the F key. Now I am able to view the side bars, as well as the top and bottom bars, when I wish. However, maybe a bug, maybe not, the right bar does not come into view when the curser hovers over the left hand side. The three other side bars, top, left and bottom, do become visible when curser hovers over the respective areas. Thanks to your help this is no longer as important an issue (for me at least). In the Window menue you have the Screen Mode which gives you all the options. Thanks again.

CS4 table borders visual aid does not display

I am using CS3 and now CS4 (upgrade) on an Mac with a website
built on tables
The background to the page is 'black'
In CS3 the table borders appear using the visual aid as
'white on black'
In CS4 they don't appear as they seem to be 'black on black'
Does anyone know how to change this behavior???

There are many things about the Mac platform's UI/OS that are
different.
For example, you cannot import a Word Document on the Mac OS
but you can on
the PC.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Osgood" <[email protected]> wrote in
message
news:ghnt1q$rid$[email protected]..
> pr-photo wrote:
>> Thanks for the replies guys
>>
>> I'm still new to the Html stuff but it appears that
my software testing
>> skills are still on the ball.
>>
>> A Case has been opened for visual aids on a 'black
background'. This is
>> ok on windows machines but seems to be an issue on
Mac OS x
>>
>
> Yep I was testing on Mac. That really is a basic and
poor error on Adobes
> part. How that wasn't picked up at beta stage is beyond
me to be
> honest....or it was and they couldn't put it right on
the Mac platform in
> time for release.
>

Alias to Image does not display image preview icon (Regression!)

I noticed that an alias to an image no longer displays the underlying image preview in the icon, instead you get the standard "JPEG" icon.
I have turned on icon previews (since other images in the same folder are correctly displayed) and all that. Also if you press Space on the Alias, the fancy Preview window will open and show the correct image. The icon however is dead. I've tested this with many images and with both OS created Aliases and using "ln -s".
This seems to apply to all kinds of alises that in the past would show the icon of their parent, not only images.
The alias "arrow" overlay is enough to inform the user that the file is an alias, there is no need to display the standard "JPEG" icon, that is so passé.
Not very leopardy.
Message was edited by: zeraien

The same thing appears to be a latent bug from Tiger -- I am seeing this in 10.4.11, and as Rob notes, it's not always consistent.
What's worse, Rob's suggestion won't work for me... because the "Select New Original..." button is greyed out! I realize this is technically a Leopard thread, but I can't imagine this was deliberately changed between 10.4 and 10.5, so I would think it would be applicable pretty broadly.
Any ideas or suggestions would be very welcome indeed.
Thanks,
/H

User-Defined Type does not display values in Table Data grid

I have a User defined Type that is a collection of one character VARCHAR2 values. In the Table Data grid it does not display the character values. I know on all our other Oracle development applications these values display. Is this a bug or is there a snippet to display these values?

Version: 1.0.0.15
DB: 10.2.0
Workstation OS: Windows XP

Bkg image does not display

A background image shows up in my "container" div in design view (DW CS4), but does not display in preview or Live View.
What might be preventing the image from displaying?
Note: bkg colors do display.

How To get Help Quickly
http://forums.adobe.com/thread/470404
Upload the test page to your web server and post a URL for us to see. It could be bad image type, a bad path to the file itself or a half-dozen other things.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Form does not display all records from table

Hi guys
I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
Any help will be appreciated.
Thanks

hi
Set the block property of "Query All Records" to "YES"
hope it will work.
Faisal

Vertical Scroll bar does not appear in table control

Hi ,
I have a table control with both vertical and horizontal scroll bars.
The data which comes is always more than 50 and the visible line size is 8.The vertical scroll bar
does not appear at times..but if i run the program again, it appears..
Sometimes it appears and sometimes no vertical scroll bar comes thought the data is more than the visible lines.
Any suggestions ? why is this happening?
Regards,
Sharadha

You have inserted data in the internal table and not "informed" the table control
In the PBO, use a statement like
DESCRIBE TABLE <itab> LINES <control>-lines.
Regards

OS 10.9 Finder sidebar suddenly does not displaying proper contents

OS 10.9 Finder sidebar suddenly does not display most items; only shows couple items I don't even want there. Can change what shows in first finder window but sidebar not responding to "Preference" changes. Screen shot is what it shows now. I downloaded a Yahoo widget and their widget player app today, could that cause this?

I did force quite finder--> no effect.
Finder uaed to list in "sidebar" each of the main folders in HD i.e Documents, Pictues, Downloads, Movies, Applications...(I get same window contents open if click on HD icon as when clikc on Finder). Now none of that.
Just now went back into preferences and unchecked everything in sidebar section. If I check for it to just show HD then everuything does show up but several windows to the right and HD icon is all that shows in sidebar but only if I first then click on (in order across the open windows: Users then geoffreylevens1 (system name).
If recheck items they do NOT show up in sidebar. See attached
Message was edited by: GeoffreyLevens--attached image shows up fine pre-posting but what you see is what you get now. Worked yesterday.

New field catalog VOLEH does not display while creating a new table

Dear Gurus,
I added new field as VOLEH in field catalog. However while I am creating a new table, new field (VOLEH) does not showed in field catalog...
How can I fix this error?
Kind Regards,

HI
Check once again in IMG>SD>Basic func>Pricing >Pricing control>define condition table>conditions : allowed fields> go to new entries then press F4
check here newly created field is there or not
(or) when creation of condition table check properly next page button in menu bar
still if its not found
Note 21040 - Allowed Fields not appearing for condition table
or check this link
http://www.sap-basis-abap.com/sd/how-to-add-new-fields-to-field-catalog.htm
Regards,
Krishna.

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

SRM MDM, Error, "Table with Code 'null' does not exist in repository"

Hi experts,
We has SRM MDM scenario, while doing OCI settings, we are able to connect with MDM repository but getting follwoing error message in portal, "java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema"
Can You please suggest,
Thanks and Regards,
Munish

Hi everyone,
Sudhanshu and Anshuk:- Thanks for your response, let me try and explain the real scenario in details:-
We have deployed the SRM-MDM Catalog Search UI in Portal.
We tried accessing the http://<Portal Host>:<Portal Port>/SRM-MDM/SRM_MDM
Then we got a screen (Search UI App screen), where in we have provided the MDM Server name, then the MDM Server Password, then presses the Connect button, then below this, it displayed the Repository name created in the MDM. We have selected the Repository, then provided the Credentials of a User (Name: T_CORP) in MDM which has "Catalog Manager", and the "UI Configuration Manager" Roles. Please note that these Role names were created by us in MDM. Is it the right procedure or do we have any standard Roles delivered by SAP in MDM to map? If any standard Roles are available, where we need to check these.
Once the Credentials of MDM User is provided, and then selected the "Login" button.
Then we are getting the below error.
"java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema"
Please clarify; we are not configuring any values in iViews. Where we need to do this, I mean name of the iView, and what values do we need provide generally? We are just running the Search UI App application; I don't think it is an iView, because the URL shows the Application name details, etc...
Please guide us, how to fix this Error.
Thanks and Regards,
Munish

CM14 BI Publisher - modifying an existing Data Model, the Graphic View in Query Builder does not display

I am trying to edit the default forms/reports that come with CM14, trying to edit the data model, data set, (to get to the old Infomaker style graphic view) , the Query model does not display (error the list of tables is too long..) Oracle tell me the limit is 60, there are not 60 tables referenced in any CM report.
Does this Query builder view work at all on any report?
(bigger question, we are moving from CM12, should we move to CM13 which works with infomaker?)
Thanks,
Paul L

Kurt, thanks for your replies.
A couple of notes/clarifications.
1. You are correct that BI works better in Firefox--I have observed issues with the BI display when using IE. I would recommend using Firefox too.
2. You are correct about the way to get to the Query Builder to see a graphical view of data tables. There are basically two issues with this that I mentioned, but will re-iterate:
a. If you have an EXISTING query in the data set, then click the "Query Builder" button, this will remove the existing query that's there, it will NOT display the existing query in the query builder. Query Builder works only to create a NEW query from scratch.
b. Query builder is limited to selecting 60 fields max in your query. If you are creating a large report with many tables, you may find that 60 fields is not enough. For that you will have to work in the SQL edit screen rather than using the query builder.
I would impress on anyone developing CM14 reports that they become familiar with the database schema and relationships to avoid problems when developing your BI reports. You should be able to find the tables and joins documentation in the knowledgebase.

CRVS2010 beta - Date field from database does not display in report

Hi there - can someone please help?!
I am getting a problem where a date field from the database does not display in the report viewer (It displays on my dev machine, but not on the client machines...details given below)
I upgraded to VS 2010
I am using the CRVS2010 Beta
My development machine is Windows 7 - and so is my fellow developer's
We are using Microsoft SQL Server 2000
We run the queries within VS and then we send the data table to VS using .SetDataSource
We have a few reports which display the date on our dev machines (whether we run the EXE or from within Visual Studio)
When we roll out to the client machines (running Windows XP SP3) then everything works, except that the date does not display (on quite a few reports)
This is the only real issue I have had - a show stopper for me
The rest works well - any input will be greatly appreciated
Regards,
Ridwan

Hi Ridwan,
After much testing I have it all working now using CRDB_adoplus.dll as a data source ( XML )
Alter your Config file to look like this:
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0"/>
</startup>
Then using the code below, and CR requires the Schema to be able to read the date format.
private void SetToXML_Click(object sender, EventArgs e)
CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
ISCDReportClientDocument rcd;
rcd = rptClientDoc;
string connString = "Provider=SQLOLEDB;Data Source=dwcb12003;Database=xtreme;User ID=sb;Password=password";
string sqlString = "Select * From Orders";
OleDbConnection oleConn = new OleDbConnection(connString);
OleDbDataAdapter oleAdapter = new OleDbDataAdapter(sqlString, oleConn);
//OleDbDataAdapter oleAdapter2 = new OleDbDataAdapter(sqlString2, oleConn);
DataTable dt1 = new DataTable("Orders");
oleAdapter.Fill(dt1);
System.Data.DataSet ds = new System.Data.DataSet();
// We need the schema to get the data formats
ds.WriteXml("c:
sc.xml", XmlWriteMode.WriteSchema);
//Create a new Database Table to replace the reports current table.
CrystalDecisions.ReportAppServer.DataDefModel.Table boTable = new CrystalDecisions.ReportAppServer.DataDefModel.Table();
//boMainPropertyBag: These hold the attributes of the tables ConnectionInfo object
PropertyBag boMainPropertyBag = new PropertyBag();
//boInnerPropertyBag: These hold the attributes for the QE_LogonProperties
//In the main property bag (boMainPropertyBag)
PropertyBag boInnerPropertyBag = new PropertyBag();
//Set the attributes for the boInnerPropertyBag
boInnerPropertyBag.Add("File Path ", @"C:\sc.xml");
boInnerPropertyBag.Add("Internal Connection ID", "{680eee31-a16e-4f48-8efa-8765193dccdd}");
//Set the attributes for the boMainPropertyBag
boMainPropertyBag.Add("Database DLL", "crdb_adoplus.dll");
boMainPropertyBag.Add("QE_DatabaseName", "");
boMainPropertyBag.Add("QE_DatabaseType", "");
//Add the QE_LogonProperties we set in the boInnerPropertyBag Object
boMainPropertyBag.Add("QE_LogonProperties", boInnerPropertyBag);
boMainPropertyBag.Add("QE_ServerDescription", "NewDataSet");
boMainPropertyBag.Add("QE_SQLDB", "False");
boMainPropertyBag.Add("SSO Enabled", "False");
//Create a new ConnectionInfo object
CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo boConnectionInfo =
new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
//Pass the database properties to a connection info object
boConnectionInfo.Attributes = boMainPropertyBag;
//Set the connection kind
boConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;
//*EDIT* Set the User Name and Password if required.
boConnectionInfo.UserName = "";
boConnectionInfo.Password = "";
//Pass the connection information to the table
boTable.ConnectionInfo = boConnectionInfo;
//Get the Database Tables Collection for your report
CrystalDecisions.ReportAppServer.DataDefModel.Tables boTables;
boTables = rptClientDoc.DatabaseController.Database.Tables;
//For each table in the report:
// - Set the Table Name properties.
// - Set the table location in the report to use the new modified table
boTable.Name = "Orders";
boTable.QualifiedName = "Orders";
boTable.Alias = "Orders";
rptClientDoc.DatabaseController.SetTableLocation(boTables[0], boTable);
//Verify the database after adding substituting the new table.
//To ensure that the table updates properly when adding Command tables or Stored Procedures.
rptClientDoc.VerifyDatabase();
MessageBox.Show("Data Source Set", "RAS", MessageBoxButtons.OK, MessageBoxIcon.Information);
Thanks again
Don

Check table TFBEFU_CR: entry 10 does not exist

Dear all
When i am doing GR for Order (T.Code : MB31),the system displays the following message.
Check table TFBEFU_CR: entry 10 does not exist
plz give me the solution as early as possible,bcaz it is very urgent to me.
Thanks in advance.
Regards
Basava sreenu

Dear Mr.Basava,
I'm not sure,but try with this.
For the particular material which you are using in MB31 for Good's receipt for
Order,check whether the storage location is present in T code MMSC-Extend
material storage location.If not add and save,then try in MB31.
If useful reward points.
Regards
Mangal

Table in scrolling sidebar does not display in Preview

Similar Messages

Maybe you are looking for