Table Output text tool tip does not update on PPR

We have a adf table with a Lov and a out put text .
On changing the LOV, the out put text also change . but, on we mouse over on the tool tip does not changed . any suggestions ?
below code :
<af:outputText value="#{row.PlanTitle}" id="ot4" partialTriggers="soc3 si2"/>
However , if we refresh the table or reload after save , the toop tip also get change . but we need to update the tool tip on change the lov . any suggestion ?
Jdev : 11.1.1.3.0
browser : all ,

Hi,
taking it from:
+"However , if we refresh the table or reload after save , the toop tip also get change . but we need to update the tool tip on change the lov . any suggestion ? "+
The autput text component is part of a table ? If so then the table needs to be refreshed as the values in there are stamped. If I am wrong with my table assumption and the output text is part of a form, try setting clientComponent="true" for the output text field
Frank

Similar Messages

Spry tool tip does not work in template or child pages within an editable region. Why not?

Ok. so I am getting pretty frustrated. I take the time to learn how to use CSS and to create a template page for a Contractor Site (www.ContractorInsurance.net). The idea is to create a page that I can use for different classes of Contractors...right?
Then I get all happy about being able to insert ToolTip onto pages to help the user. Great!
LIfe to turn to Sorrow after nearly five hours of searching for a "eeking" answer.
So what good does it do to have an Editable region to update if we cannot have the flexibility to insert a tool tip on child pages? Ok so the fast solution is to what... Have a question mark image, insert another apDiv, name it toolTip_Not and provide it with a show=hide behavior?
RRRRRrrr...
This really sucks not being able to find a solution within a reasonable amount of time.

I have tried thank you. However...it is still not working.
www.ContractorInsurance.net/course_of_construction.php
The error message is "Making this change would require code that is locked by a template translator"
Re: Spry tool tip does not work in template or child pages within an editable region. Why not?
created by altruistic gramps in Spry Framework for Ajax - View the full discussion
If you have a look at the following simple document with a tooltipTooltip trigger goes here.
Tooltip content goes here.
you will notice that a couple of lines have been placed in the HEAD section of the document. When using DW templates, the HEAD section is usually not editable, hence the error mesaage. By default, your template should have an editable region in it just before the closing tag. It looks like this:  Dreamweaver should be able to find that editable region and insert the
<script> tag there automatically. Because you don't have an editable region like that in the <head>, open the master template, and paste the code above just before the closing </head>
tag. Gramps
Edited to remove personal data

Alt-text 'tool tip' not appearing on some images

We get pdf files created by outside sources that we then need to publish on our webpage. I add tags to the pdf, then add the alt-text to the images via the Touch Up Text tool. As well as I can determine, the tag for the alt-text is present in the pdf. The Read Out Loud function in Acrobat reads the alt-text correctly as does a screen reader. But the 'tool tip' does not appear on all images. It seems that the more complex, mulitple layered dwg type images do not display the text, either from the browser, or from Acrobat itself. Other dwg source images do work, and photgraphic images are ok.
I have gone back through the pdfs to verify the existence of the figure tag, and that the alt-text is there.
I have opened the tags dialog, looked at the properties, and added the text to the Title field as well as the alt-text and Actual Text.
I have converted the images to jpgs, which resolves the issue, but greatly reduces the quality of the image.
I am using Acrobat Pro 8.1.4 on a Windows XP, sp2 system.
I am aware that the ADA requirement do not require the 'tool-tip' to function, but when you have many, many pages of images in a pdf using a screen reader or the read out loud function to test is not feasible for testing. We need to have the tool-tip working, and I have run out of ideas on how to make it work.

I just figured out that those photos had been set to a blending mode of Multiply
because an earlier iteration of the design used transparency. But to the eye, they
look like normal photos, so I didn't realize they were set to Multiply.
This solved the problem but it's not heartening news. What if my graphic legitimately
did have a blending mode set? What would my workaround be if I needed to set Alt Text
for those images?

Unable to update, when executed table gets lock and Execution does not stop even for an hour.

Following is my Query, which unables to update. When Executed, table gets lock and Execution does not stop even for an hour.
update Employees
set Status = 'Close'
where statusid IN (select statusid
from MyView
where DownloadedDate ='2014-07-27 00:00:00.000'
here Employee contains 3,00,000 of records and Subquery return 1,50,000 Empid
i tried in various ways but not able to solve, statusid column have no index on, i tried using cursor but it does not work.
plz let me know how to solve this Issue, Its very Important to get solve as all my further work depends on Updation
, THANKS IN ADVANCE.

See also your other thread with the same question:
http://social.msdn.microsoft.com/Forums/en-US/80243625-fc3b-4ee1-bce1-4adcdbc16c14/unable-to-update-when-executed-table-gets-lock-execution-does-not-stop-execution-even-for-an-hour?forum=sqlserversamples
Olaf Helper
[ Blog] [ Xing] [ MVP]

Bug in PL/SQL - Does not update Table if table name & variable name same in

Dear All,
If tabale name & vairable name is same in a Stored Procedure, UPDATE to table does not take place.
For example run following 2 procedures. First procedure does the insert properly to table but second procedure does not update the table.
create or replace procedure BugDemo1
as
LAST_NAME VARCHAR2(30);
FIRST_NAME VARCHAR2(30);
Begin
LAST_NAME := 'Prasad';
FIRST_NAME := 'Raghnandan';
Insert into com_people (id,Roles, LAST_NAME, FIRST_NAME) values (77777,'Patient', LAST_NAME, FIRST_NAME);
end;
create or replace procedure BugDemo2
as
LAST_NAME VARCHAR2(30);
FIRST_NAME VARCHAR2(30);
Begin
LAST_NAME := 'Pra';
FIRST_NAME := 'Raghu';
Update com_people set
LAST_NAME = LAST_NAME,
FIRST_NAME = FIRST_NAME
where id = 77777 ;
end;
------------------------------------------

Hi,
It is not a bug. Oracle is updating the records. Here Oracle is treating the variable name as COLUMN_NAME. Since priority is higher for a COLUMN on variable so each column is getting updated by itself resulting no change in data.
SQL> CREATE TABLE com_people
2 (
3 id NUMBER (5),
4 Roles VARCHAR2(20),
5 LAST_NAME VARCHAR2(20),
6 FIRST_NAME VARCHAR2(20)
7 )
8 ;
Table created
SQL> Insert into com_people (id,Roles, LAST_NAME, FIRST_NAME) values (77777,'Patient', 'LAST_NAME', 'FIRST_NAME');
1 row inserted
SQL> COMMIT;
Commit complete
SQL>
SQL> create or replace procedure BugDemo2
2 as
3 LAST_NAME VARCHAR2(20);
4 FIRST_NAME VARCHAR2(20);
5 Begin
6 LAST_NAME := 'Pra';
7 FIRST_NAME := 'Raghu';
8
9 Update com_people set
10 LAST_NAME = LAST_NAME,
11 FIRST_NAME = FIRST_NAME
12 where id = 77777 ;
13
14 DBMS_OUTPUT.PUT_LINE('UPDATED ROWS ='||SQL%ROWCOUNT);
15 end;
16 /
Procedure created
SQL> set serveroutput on
SQL> execute BugDemo2;
UPDATED ROWS =1
PL/SQL procedure successfully completed
SQL> Regards

BAPI_ACC_DOCUMENT_POST does not update BKPF/BSEG tables

Hello,
I used bapi_acc_document_post to post a accounting document The following routine says that the document is successfully posted, however, does not update the acccounting tables. I read several messages on the SDN and unable to get the correct answer.
Your help is appreciated.
Regards
William
REPORT ze_bapi_acc_document_post .
SELECTION-SCREEN BEGIN OF BLOCK bl01 .
SELECTION-SCREEN ULINE.
PARAMETERS:
ref_key LIKE bapiache01-obj_key DEFAULT 'TEST000001BAPICALL',
dest    LIKE bdi_logsys-logsys DEFAULT '          '.
SELECTION-SCREEN END   OF BLOCK bl01 .
DATA:
gd_documentheader    LIKE bapiache09,
gd_customercpd       LIKE bapiacpa09,
gd_fica_hd           LIKE bapiaccahd,
it_accountreceivable LIKE TABLE OF bapiacar09 WITH HEADER LINE,
it_accountgl         LIKE TABLE OF bapiacgl09 WITH HEADER LINE,
it_accounttax        LIKE TABLE OF bapiactx09 WITH HEADER LINE,
it_criteria          LIKE TABLE OF bapiackec9 WITH HEADER LINE,
it_valuefield        LIKE TABLE OF bapiackev9 WITH HEADER LINE,
it_currencyamount    LIKE TABLE OF bapiaccr09 WITH HEADER LINE,
it_return            LIKE TABLE OF bapiret2   WITH HEADER LINE,
it_receivers         LIKE TABLE OF bdi_logsys WITH HEADER LINE,
it_fica_it           LIKE TABLE OF bapiaccait WITH HEADER LINE,
it_accountpayable    LIKE TABLE OF bapiacap09 WITH HEADER LINE,
it_paymentcard       LIKE TABLE OF bapiacpc09 WITH HEADER LINE,
it_ext               LIKE TABLE OF bapiacextc WITH HEADER LINE.
PERFORM fill_internal_tables.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_CHECK'
DESTINATION dest
EXPORTING
    documentheader    = gd_documentheader
    customercpd       = gd_customercpd
    contractheader    = gd_fica_hd
TABLES
    accountgl         = it_accountgl
    accountreceivable = it_accountreceivable
    accountpayable    = it_accountpayable
    accounttax        = it_accounttax
    currencyamount    = it_currencyamount
    return            = it_return.
WRITE: / 'Result of check all:'.                            "#EC NOTEXT
PERFORM show_messages.
DATA: l_type LIKE gd_documentheader-obj_type,
        l_key LIKE gd_documentheader-obj_key,
        l_sys LIKE gd_documentheader-obj_sys.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
    EXPORTING
      documentheader    = gd_documentheader
      customercpd       = gd_customercpd
      contractheader    = gd_fica_hd
    IMPORTING
      obj_type          = l_type
      obj_key           = l_key
      obj_sys           = l_sys
    TABLES
      accountgl         = it_accountgl
      accountpayable    = it_accountpayable
      accounttax        = it_accounttax
      currencyamount    = it_currencyamount
      return            = it_return
    EXCEPTIONS
      OTHERS = 1.
WRITE: / 'Result of post:'.                               "#EC NOTEXT
PERFORM show_messages.
REFRESH IT_RETURN.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
   WAIT          = 'X'.
IMPORTING
RETURN        = IT_RETURN.
    COMMIT WORK.     .
BREAK-POINT.
     Form fill_internal_tables
FORM fill_internal_tables.
PERFORM fill_header.
PERFORM fill_accountgl.
PERFORM fill_accountap.
PERFORM fill_accounttax.
PERFORM fill_currencyamount.
ENDFORM.                               " fill_internal_tables
     Form Show_messages
FORM show_messages.
IF it_return[] IS INITIAL.
    WRITE: / 'no messages'.
ELSE.
    SKIP 1.
    LOOP AT it_return.
      WRITE: /    it_return-type,
             (2) it_return-id,
                  it_return-number,
             (80) it_return-message,
                  it_return-message_v1,
             (20) it_return-parameter,
             (3) it_return-row,
                  it_return-field.
    ENDLOOP.
ENDIF.
ULINE.
ENDFORM.                               " Show_messages
      FORM fill_accountgl                                           *
FORM fill_accountgl.
Actual invoice line
CLEAR it_accountgl.
it_accountgl-itemno_acc     = 2.
it_accountgl-gl_account     = '0000009223'.
it_accountgl-item_text      = 'Line Iten'. "#EC NOTEXT
it_accountgl-profit_ctr     = 'DNDDUMMY'.
it_accountgl-comp_code      = '0180'.
it_accountgl-tax_code       = 'IG'.
it_accountgl-FUNDS_CTR      = '1985BA'.
it_accountgl-COSTCENTER     = '1985BA'.
it_accountgl-FUND           = 'C113'.
it_accountgl-TAXJURCODE     = 'CAON'.
APPEND it_accountgl.
ENDFORM.                    "fill_accountgl
      FORM fill_header                                              *
FORM fill_header.
CALL FUNCTION 'OWN_LOGICAL_SYSTEM_GET'
   IMPORTING
     own_logical_system = gd_documentheader-obj_sys.
OBJ_TYPE has to be replaced by customers object key (Y* or Z*)
gd_documentheader-obj_type   = 'BKPFF'.
gd_documentheader-obj_key    = ref_key.
gd_documentheader-BUS_ACT    = 'RMRP'.
gd_documentheader-username   = sy-uname.
gd_documentheader-header_txt = 'BAPI Test'.               "#EC NOTEXT
gd_documentheader-obj_key_r =
GD_DOCUMENTHEADER-reason_rev =
gd_documentheader-comp_code = '0180'.
GD_DOCUMENTHEADER-AC_DOC_NO =
gd_documentheader-fisc_year = '2008'.
gd_documentheader-doc_date   = sy-datum.
gd_documentheader-pstng_date = '20070901'.
GD_DOCUMENTHEADER-TRANS_DATE = SY-DATUM.
GD_DOCUMENTHEADER-VALUE_DATE =
GD_DOCUMENTHEADER-FIS_PERIOD =
gd_documentheader-doc_type   = 'RE'.
gd_documentheader-ref_doc_no = '6000009268'.
GD_DOCUMENTHEADER-COMPO_ACC = 'FI'.
gd_documentheader-bus_act    = 'RFBU'.
ENDFORM.                    "fill_header
      FORM fill_ap                                                  *
FORM fill_accountap.
vendor line
CLEAR it_accountpayable.
it_accountpayable-itemno_acc = 1.
it_accountpayable-comp_code = '0180'.
it_accountpayable-pmnttrms = '0006'.
it_accountpayable-TAX_CODE = 'IG'.
it_accountpayable-vendor_no = '0001200051'.
it_accountpayable-item_text = 'Vendor Line'. "#EC NOTEXT
APPEND it_accountpayable.
ENDFORM.                    "fill_accountap
      FORM fill_tax                                                 *
FORM fill_accounttax.
tax line
CLEAR it_accounttax.
it_accounttax-itemno_acc = 3.
it_accounttax-gl_account = '0000081710'.
it_accounttax-tax_code   = 'IG'.
it_accounttax-acct_key   = 'VST'.
it_accounttax-TAXJURCODE     = 'CA00'.
APPEND it_accounttax.
ENDFORM.                    "fill_accounttax
      FORM fill_currencyamount                                      *
FORM fill_currencyamount.
CLEAR it_currencyamount.
it_currencyamount-itemno_acc   = 1.
it_currencyamount-curr_type    = '00'.
it_currencyamount-currency     = 'CAD'.
it_currencyamount-amt_base     = '106.00'.
APPEND it_currencyamount.
CLEAR it_currencyamount.
it_currencyamount-itemno_acc   = 2.
it_currencyamount-curr_type    = '00'.
it_currencyamount-currency     = 'CAD'.
it_currencyamount-amt_base     = '100.00'.
APPEND it_currencyamount.
CLEAR it_currencyamount.
it_currencyamount-itemno_acc   = 3.
it_currencyamount-curr_type    = '00'.
it_currencyamount-currency     = 'CAD'.
it_currencyamount-amt_base     = '6.00'.
APPEND it_currencyamount.
ENDFORM.                    "fill_currencyamount

U have to implement the BADI for this.. ‘AC_DOCUMENT’
Add source code into Method: CHANGE_INITIAL & CHANGE_AFTER_CHECK,
*---<SAPLBPFC> is for Posting      with BAPI: BAPI_ACC_DOCUMENT_POST
*---<SAPCNVE > is for Posting(Tax) with BAPI: BAPI_ACC_DOCUMENT_POST
*---<SAPMSSY1> is for Test(Check) with BAPI: BAPI_ACC_DOCUMENT_CHECK
DATA: wa_header TYPE acchd.
    IF sy-xprog NE ' SAPMSSY1 '.
      CLEAR wa_header.
      wa_header = im_document-header.
      ex_document-header-bktxt = wa_header-bktxt.
      CLEAR wa_header.
    ENDIF.

Bug report: text does not update on the stage

I am not sure whether this has been reported:
I have several groups divs into one main group div. In these are images and text. I create a new group by copying elements from a previous group and then insert new text in the copied text box. The text does not update on the stage but is correct when I run the composition and also in the text panel.

Hi Hemanth.
I tried all day and is intermittent, why?, 'cause the numbers are now showing but the other texts not, this happen only on Chrome and Safari when the navigator screen increases size.
On Chrome:
On Firefox:
I discovered that the error appears only on the right side of the stage, if I move the buttons to center, the error disappears:
On Chrome (Fullscreen):
I have no idea of what is happening.

Bug: Histogram Does Not Update when Using Painting Tools

I was investigating something else, and I saw something not working... I'm under the distinct impression that the Histogram panel should automatically update after every operation. Having the Histogram panel displayed full-time on the screen, it should always be up to date.
However, when I Dodge or Burn or even paint color on an image, the Histogram is not updating.
If I select one of the History states I've just created, it updates.
Consider this simple sequence of operations:
I'm able to reproduce this failure in Photoshop CS5 as well, BUT NOT IN CS4 (it updates in Photoshop CS4 after every painting operation), so clearly it's not a new bug, though somehow I've managed not to notice it in my years of using Photoshop CS5.
Is it broken like this for everyone in Photoshop CS5 and 6?
Could this be some twisted attempt to try to optimize painting performance? If so, why isn't there an option to allow a user to request it to update on every operation on a fast computer with cores out the wazoo?
-Noel

More info:
Just poking around in Photoshop CS6 to see what, if anything would make the Histogram display update...
Even though the Refresh icon is disabled (and the "Uncached Refresh" entry in the fly-out menu is grayed-out), double-clicking in the topmost histogram display will force it to update (as described above by Conroy in post #1 above).
If I change the selection Channel field in the Histogram panel, mostly it does not update, but when I change between some of the settings - for example between RGB and Luminosity - the graphs update. Amazingly they revert back to the un-updated state if I switch the channel BACK to what it was!
Making a selection DOES cause it to update.
Choosing Select - Color Range (just starting the function) DOES cause it to update.
Hitting the quick mask mode button DOES cause it to update. Notably Edit in Quick Mask Mode is in the Select menu. Could an association with Select be a clue?
This bug is easy to reproduce, is shown to be a problem across multiple versions and multiple OSs, and in at least one case (Photoshop CS4 x64 on Windows 7 x64 here) it can be shown to work properly, so the code is probably not far off being right. Seems to me this should be the kind of thing a junior engineer could find and fix so someone, say, at Chris Cox's level could have it done before 5 today...
-Noel

Book editing - change a photo, book does not update

We are having a small problem. When editing our book, we double on some photos to edit them. Crop, color adjust, etc. Then we click done, and get sent back to our Book page.
Now about half the time the book preview does not update the image that we just changed. It seems to update the larger full page images more often than it updates the smaller images in the book layout. If I double click the photo again, I can see the change I previously made are still there, but they are not being reflected in the book preview.
So 2 questions, how do I force the book to update its photo preview? And if I print this will it use the edited photo, and not the version its showing me in the preview?
Assume this is just a screen display issue, and that the generated print will use the right assets, right?
This is in iLife '08 on Leopard on an intel Macbook.

Squeegy:
Welcome to the Apple Discussions. Try changing the layout, i.e. from frames with or without text to the other and then back. That may jump start the picture to display properly. It works for me when I do some cropping, like from landscape to portrait and the frame doesn't reset itself.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Text ID for text object MATERIAL does not exist - MM01

Hi All,
I am getting below error message when trying to save Material Master in MM01.
Text ID for text object MATERIAL does not exist
Message no. TD603
Diagnosis
You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
Procedure
You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
I have searched the forums but couldn't get relevant message.
Please assist.
Thanks,
Raj

Hi Jurgen,
This is the complete message i am getting.
Text ID for text object MATERIAL does not exist
Message no. TD603
Diagnosis
You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
Procedure
You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
If I enter MM02 and without changing anything if i save still i get this error message.
Thanks & Regards,
Raj

Batch Split in OBD & billed for the entire Quantity .RG1 register does not update the excise values

Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank you

My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi

Select from 1 table only if a value does not exist

Hello all,
I'm having problems devising a single select statement to accomplish a single return value. I have tried variations of DECODE and COALESCE, but it's escaping me.
I have two tables that are as follows:
NAME
ID, FULLNAME
1, Senior
2, Junior
3, Mister
4, Senor
5, Miss
ABBREVIATION
ID, ABBREV
1, Sr
2, Jr
3, Mr
5, Ms
What I would like to do is select from the NAME table only if the value does not exist in the ABBREVIATION table.
Ideally if I were to do something such as:
SELECT * FROM .... WHERE (ID=1 or ID=2 or ID=4) ....
I would receive the following output:
1, Sr
2, Jr
4, Senor
Thanks for reading!

You want an outer join.
SELECT decode(a.abbrev, NULL, n.fullname, a.abbrev)
FROM name n,
abbreviation a
WHERE n.ID = a.ID(+)
AND ....Something like that.
Full example:
with n as (
select 1 as ID, 'Senior' as FULLNAME from dual UNION ALL
select 2 as ID, 'Junior' as FULLNAME from dual UNION ALL
select 3 as ID, 'Mister' as FULLNAME from dual UNION ALL
select 4 as ID, 'Senor' as FULLNAME from dual UNION ALL
select 5 as ID, 'Miss' as FULLNAME from dual),
a as (
select 1 as ID, 'Sr' as ABBREV from dual UNION ALL
select 2 as ID, 'Jr' as ABBREV from dual UNION ALL
select 3 as ID, 'Mr' as ABBREV from dual UNION ALL
select 5 as ID, 'Ms' as ABBREV from dual)
select decode(a.abbrev, NULL, n.fullname, a.abbrev)
from a, n
where n.id = a.id(+)
order by n.id;
ID                     DECODE(A.ABBREV,NULL,N.FULLNAME,A.ABBREV)
1                      Sr
2                      Jr
3                      Mr
4                      Senor
5                      Ms
5 rows selectedEdited by: tk-7381344 on Nov 17, 2008 1:31 PM

Eclipse:package weblogic.webservice.tools.wsdlp does not exist

Hi, everyone! I got an error While I was Compiling the Entire MedRec Project application on Eclipse3.1 with ant. However, when I used setEnv.cmd and ant command(), it's all Ok! The error message shows as below:
banner:
[echo] #### S T A R T C O M M O N W E B A P P ####
[mkdir] Created dir: C:\medrec_tutorial\build\tmp
build:
[javac] Compiling 23 source files to C:\medrec_tutorial\build\tmp
[javac] C:\medrec_tutorial\src\common\web\com\bea\medrec\utils\MedRecWebAppUtils.java:319: package weblogic.webservice.tools.wsdlp does not exist
[javac] if (th instanceof weblogic.webservice.tools.wsdlp.WSDLParseException) {
[javac] ^
[javac] 1 error
BUILD FAILED
file:C:/medrec_tutorial/src/common/web/build.xml:29: Compile failed; see the compiler error output for details.

Bruce Stephens <[email protected]> wrote:
Hello,
This looks like a bug that has already been reported and resolved. If
you could provide your test case to our super support group [1], and
reference CR127344, they should be able to sort out this issue.
Thanks,Hi ,
I also got the same error.If u find the solution please email me
isuru [email protected]
Thanx
Bruce
[1]
http://support.bea.com
[email protected]
Franck wrote:
Hello,
when I try to build my webservice with a stateless bean and a complexdata type (byte[]), by using ANT and SERVICEGEN.
I have the following exception (with WL 8.1, but it works witout problemwith WL 7.0.4).
*** ERROR:
-package weblogic.xml.schema.binding does not exist
[servicegen] extends weblogic.xml.schema.binding.BeanCodecBase
What has changed between the both version.
can somebody help me
Tank you
Regards

Fire fox shows a window which indicates that the yahoo tool bar does not have a security cert. Then runs using 99% processor

a window pops up when i open Firefox which indicates that the Yahoo tool bar does not have a security cert. Seems to lock up when going to Comcast.net. Uses 99% processor and won't close.
== URL of affected sites ==
http://comcast.net

Ok. I disabled hardware acceleration. The only extension is the McAfee Scriptscan for Firefox 15.1.0, which was already disabled. I then disabled all plugins (Acrobat, Google Update, Intel Identity Protection (2x), Java Deployment Toolkit, Java Platform, MS Office 2013, Quicktime, Shockwave, Silverlight), which were all up to date.
Normal or safe mode still has same result. No startup, no option button and no customize.
Thanks for your help. Got any other suggestions?

TOOL TIP is not working!!

Hello
(1)Now i can see the Caption of a object/field as TOOL TIP, fine.
(2)After i am binding with the associated data source field, I also got the populated value of that object/field as tool tip, fine.
I mean, not 2 tool tips, at the same second, either (1) ir (2), fine.
But, both are working for ONLY editable fields, tool tip is not working for "readOnly" fields (i colored these fields with GREY color)!!
Pls. let me know How can i get a tool tip for all KIND of fields, like, Greyedout fields, "readOnly" fields....all
Thank you

You could create an invisible field with the tooltip text you desire, send it to the back, and then on mouseenter of the field you want the tooltip for you just make the tooltip field visible and then make it invisible again on mouseexit.
on mouseenter:
this.presence = "visible";
on mouseexit:
this.presence = "invisible";
I've used this method in the past to pop up half page instruction sets.
djaknow

Table Output text tool tip does not update on PPR

Similar Messages

Maybe you are looking for