Table QMEL: Adding a Z field
Hi guys.
I want to ask you about how to add a Z field into the Notifications table QMEL.
Please, I need your help.
Thank you.
R.Romero.
Moderator message: appending Z-fields is standard functionality, please read documentation before asking.
Edited by: Thomas Zloch on Nov 5, 2010 4:15 PM
In the View,Menubar->goto-> append view.
It will ask for the structure for append.You now have to define a name for this append view. The system proposes a list of the append views that already exist for this view. If there is no reason for not doing so, you should choose an append view from this list and then enhance it.
If the view does not yet have an append view, the system normally proposes a standard name that can be selected if there is no reason for not doing so. If no name is proposed, you must select a name in your namespace.
Similar Messages
-
Adding a new field to a DB table
Hi,
I am working on 4.6C.
The requirement is to add an extra field to a database table which already has data in it...
Will this effect the system in any way...if I add a field with the data in the table.
What precuations do i have to take before adding an extra field to a DB table.
I was wondering what will happen when i need to transfer the TR.. Basically the data is there in Production and Quality and not in development... so it will not be a problem in development...
I mean changing the structure of the table with data in it ... Is it Ok...
Thanks & regardsHi Sam,
you can add a new field to any database table if even
if contains data in production, only thing to do is u just
have create an append structure to that table and in that
append structure just create the new field.
NOTE : Naming Conventions as follows:
For Append Structure e.g :
In se11 enter Table Name and select change button.
now select GOTO option in the menu bar and select APPEND STRUCTURE option.
now the screen shows u an default name for ur append structure, so dont change the name
just hit enter button and
now enter the your new field name with two Z's infront of the field.
e.g if ur field name is MATNR then enter ZZMATNR as ur field in the append structure.
and now save and activate and also adjust in the DATABASE UTILITY.
thanks & regards,
CH Vamsi Bharath -
Adding a new field to a Z table
We have a Z table on which we have created a datasource. We have created a virtual cube on this datasource and queries are built on this cube. This setup is present on Dev, Quality and Prod environment.
Now we have added a new field to the Z table in Dev. We will be creating a new Infoobject for this new field and will be adding it in the Virtual Infoprovider and also in the queries.
1. Do we need to replicate the datasource so that newly added field is visible to the datasource? If no, is there any way?
2. When I have to transport this to Quality and Prod, do I have to capture all the components and objects (Table,Datasoure,Virtual Cube Queries)? If no, what should I capture in the transport request?Hi,
First, you have to regenerate the datasource in order to add the field:
1) Log on to source system (where Z table is stored) and go to transaction RSA6.
2) Select the root node and click Expand (icon with '+' sign).
3) Search for your datasource (you can use the binoculars icon).
4) Click on Change.
5) Verify that the field appears on the list. Make sure that "Hide field" and "Field only known on client exit" options are not marked for this field.
6) Click on Save.
7) Select "Datasource" -> "Generate" (CTRL+S) menu option.
8) Use RSA3 transaction in order to verify the new field appears on test extractions.
Then, to replicate the datasource in BI:
1) Log on to SAP BI and go to RSA1 transaction.
2) Go to "Modeling" -> "DataSources" section.
3) Search for your datasource and right click on it. Select "Replicate metadata" from context menu.
4) Add the new InfoObject to the VirtualProvider.
5) Update the transformation which joins the DataSource to the VirtualProvider.
As far as transport requests are concerned, even though it requires more work, it is a good practice to group objects in different transport requests according to their type:
In the source System (R3 for instance):
1) One transport request with the table.
2) One transport request with the datasource and its structure.
In BI:
1) One transport order with the datasource replica.
2) One transport order with the new InfoObject(s).
3) One transport order with the modified VirtualProvider.
4) One transport order with the modified transformations from the datasource towards the VirtualProvider.
5) One transport order with the Queries and their elements.
I hope this helps you.
Regards,
Maximiliano -
Adding a new field to the table
Hello friends,
I have a custom table and is in use from a long time now.
Now i need to add a new field to that table.
1 - can i go directly to the change mode and then add it or is their any other way that needs to be followed.
2 - once added do i need to go to SE14 and do something thr for the changes done to the table.
This table also has a table Maintenence generator. Do I need to do something thr.
Thanks,
Bob.Hi,
Check whether the change in ur custom table is going to impact any Custom program or not.
If its so then adjust ur ABAP code so as to fit with the new table.
Decide whether this field is going to be aprt of primary key or simple field.
Is there any data present in ur custom table already?
Regards,
Lakshman. -
Regarding adding a Custom field to Standard Table
Hi ABAPers,
Can any one explain the below spec-description.
"The purpose of this design is to provide the foundation for a more automated solution to the invoice reconciliation process. This design calls for adding a custom field to the standard SAP table EINE as well as a data maintenance tool for the same. There will also be a new custom table for storing values associated with the new EINE field. These new tables will also provide users with the ability to determine which PIR are soon to expire."
We have to add one custom field to standard table EINE, how we can add this custom field to STND table.
According to me we can add it through append structure. is it correct or not.
and what is data maintenance tool.
Pls.............Explain in details.
Thanks in advance.
Regards,
Ramana Prasad. THi,
Goto SE11 ,give ur table name.Then press display button.Then in the application tool bar press on append structure ...Now create a zstructure and add ur custom field and then activate the table.
Regards,
nagaraj -
Table QMEL is partially active ERROR AS Adjustment terminated in step 6
Dear all,
i have added some fields in qmel by using append structure but i am then i am trying to activate table via
tcode se14 but i am error message as Adjustment terminated in step 6.
Can any one help me on this...
Thanks
Sivakumar Ramakrishnan
Edited by: Siva Kumar on Feb 10, 2011 1:07 PM
Edited by: Siva Kumar on Feb 10, 2011 1:16 PMhi
just i added some fields in in append structure and then i tried to active table qmel in SE14 but i am getting error message
Adjustment terminated in step 6
Conversion could not be restarted
TABL QMEL already exists
Renaming of table QCM8QMEL to QMEL failed
Error in step QMEL-STEP6
Thanks
siva -
Adding a new field to the transaction va01
Hi,
I have added a field to the va01 transaction in the "Additional Data B" tab
by modifying screen number 8309 in program SAPMV45A.
I have also added a structure in the table vbak for this additional field on the screen.
But I can not save or display the data in that field.
Should I give the value somewhere in the code of screen number 8309 or any ohter way of this?
Regards,
UtkuHi
When you create your screen use directly the std structure VBAK and VBAP to design the input/output fields.
So for example if you have added the field ZZFIELD in VBAK, insert it in 8309.
In this way the standard program VA01'll automatically store your data in your fields.
So you don't need to write some code to store it, but only (if it needs) some code for validations in the screen flow.
Max -
Problem in creating table maintenance generator for 61 fields in table
Hi Experts,
I am facing problem in creating a table maintenance genarator for a ZTABLE which has 61 fields
i am using below details whicle creating the TMG
in Maintenance screen
i am giving maintenance type as two step
Maint screen no overview screen 2
single screen 3
Dialog Data Transport details
Recording routine standard recording routine
but it is giving following error
screen SAPL<ZTABLE NAME> 0003 could not be generated
In DYNPFIELD_ATTR mandatory field LINE has no value
please let me know how to sort out these errors.
Is there any limit on the number of fields for which we can create table maintenance generetor.
Thanks a lot in advance
SudiptoHi Sudipto,
There is not limit to the number of fields of the Table which can be used in TMG for generation. But, from the usability point of view this will horrible.
I created a Z table and added 64 fields and was able to generate the TMG with the screens perfectly. So, I guess there should not be any problem.
Well, have a look at the Function Group. I guess the screen numbers are already used by some other screens. You can set the system to propose freely available screen numbers from the pool.
Also, check whether proper authorization is assigned or not.
And if nothing is working, you can degenerate all the generated screens and then can have a new regeneration of it.
Hope these tips will work.
Thanks,
Samantak -
Adding a new field to search of Service Contracts
Hi Experts,
I have a requirement where in to add an existing field i.e your ref (sold_to) your_ref_sold field into the search criteria of Service Contrct .
How to add the field to the Search .
I have few questions here.
1 need I use EEW to add the field to Search but its already existing?
2 If not How to append the Structure crmst_query_src_btil and enhace it with field required?
3 how to implement the BADI crm_rf_search_eew?
Thanking You,
Sree.The search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
read table shlp-fielddescr into wa_shlp
with key tabname = 'M_PREMN'
fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
select orgeh endda
up to 1 rows
from pa0001
into (ld_orgeh,ld_endda)
where pernr eq record_tab-string+wa_shlp-offset(8)
u201Cpernr length is 8
order by endda descending.
endselect.
select single orgtx
from t527x
into ld_orgtxt
where orgeh eq ld_orgeh and
sprsl eq sy-langu and
( endda ge sy-datum and
begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop. -
Adding a new field to the search help exit
Hi friends,
adding a new field to the search help exit. How does it work ?
Thanks in advace
IlhanThe search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
read table shlp-fielddescr into wa_shlp
with key tabname = 'M_PREMN'
fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
select orgeh endda
up to 1 rows
from pa0001
into (ld_orgeh,ld_endda)
where pernr eq record_tab-string+wa_shlp-offset(8)
u201Cpernr length is 8
order by endda descending.
endselect.
select single orgtx
from t527x
into ld_orgtxt
where orgeh eq ld_orgeh and
sprsl eq sy-langu and
( endda ge sy-datum and
begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop. -
SAP Work Manager customization - adding a new field to equipment details screen (Syclo Agentry)
Hi Experts,
I am trying to add a field (NAME1) on the Equipment details screen under work orders in work manager 5.3 application.
I have performed the following steps, but I am getting an error while connecting to the application.
1) Create extension for Equipment class to add a new field.
2) added the new field (Name1) as the property to the standard object Equipment.
3) Added the field on the screen.
4) Added the field (name1) to the complex table ctEquipment.
5) Added the JAR file to Agentry.ini file.
6) Changed the Class mapping for parameter "Equipment" under group "SAPOBJECT" to point it to the custom (Extended) class.
7) Changed the class mapping for complex table parameter "ctEquipment" under group "CT_SAPOBJECT" to point it to the custom class.
8) after publishing the changes and re-starting the server, I get following error.
the log file generated (message.log) also has the same description.
What am I missing here? Any help would be really appreciated.Hi Emanuel,
Thanks for looking into this issue.
I have performed the following steps as suggested by you, still it doesn't seem to work and gives the same error.
Below are the changes done on the ECC Side.
1) Copied the standard equipment class /SYCLO_CL_PM_EQUIPMENT1_DO to custom class ZSYCLO_CL_PM_EQUIPMENT1_DO. Changes made in the GET Method to get custom equipment related data
2) Modified the standard equipment structure /SYCLO/PM_EQUI_STR by adding one custom field
3) Configured this custom class as the object handler in the equipment mobile data object
4) Configured this custom class as the object handler for the equipment complex table
5) We are still using the standard BAPI Wrapper itself for getting the equipment data and the added field is reflected in the BAPI Wrapper table parameter
Is there something we are missing? -
Adding a new field to the Address Data for a business partner
Hi Experts,
I am trying to add a new custom field to the address data (all structures and tables) that is linked to a business partner on SAP CRM via EEWB. Structure is the address structure wthin BUS_EI_EXTERN. Table is BUT020. I have been told that it is not possible as there is no Business Object that allows this. When doing an EEWB, the only business object is BUPA, which when selected, adds the new custom field to BUT000. I would like the field to be added to BUT020 (Address Table). This leads me to believe that there is no standard way of doing this, which ultimatley means that it would need to be done manually. Please help me with this predicament.
Regards
YusufThe search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
read table shlp-fielddescr into wa_shlp
with key tabname = 'M_PREMN'
fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
select orgeh endda
up to 1 rows
from pa0001
into (ld_orgeh,ld_endda)
where pernr eq record_tab-string+wa_shlp-offset(8)
u201Cpernr length is 8
order by endda descending.
endselect.
select single orgtx
from t527x
into ld_orgtxt
where orgeh eq ld_orgeh and
sprsl eq sy-langu and
( endda ge sy-datum and
begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop. -
EEWB - In BP, adding a new field regenerates append structure
Hello,
After adding or deleting a field using EEWB, I have the following issues -
1. The new append structure that was created for BUT000 gets regenerated
2. Field labels get overwritten by field names
3. The order in which the fields were seen on the screen gets altered
Is this a known behavior of EEWB? How to alleviate this?
Thanks!Thanks for your input Satish!
I searched using the application component suggested and the keyword and it was not very useful.
Some more details -
I created some new fields using EEWB. When you go to transaction BP, the standard tabs are displayed - ex - address, bank data, notes, etc. But now there is a new tab - Customer Data that has my custom fields on it.
In the backend, SAP has created an extend structure for table BUT000 that has these fields in it.
When I go to this extend structure, my fields are there with a ZZ prefix - Ex: ZZFIELD1, ZZFIELD2, etc. If you go to the details of these fields in data dict - transaction SE11, the Field labels - Short, Medium, Long and Heading are the same as the field names. Ex: in the first case, the four field labels will be - ZZFIELD1. I then changed the field labels to something meaningful - Ex: Renter name and rental date. After generating the structure, these labels are then displayed on the Customer data tab. So far so good.
However if I add a new field - ZZFIELD3, then all the label names that I had given (Ex: Renter name and rental date) get erased and replaced by the fieldnames again.
Also the order in which the fields were diplayed gets altered. Ex: earlier the Customer data screen was showing - ZZFIELD1, ZZFIELD2. Now it shows - ZZFIELD3, ZZFIELD2, ZZFIELD1.
I hope I have explained this issue. -
Maintaining operating concern after adding new value field
Hello,
I added a new value field to our live operating concern,maintained the data structure throguh KEA0(Maintain operating concern).The changes are transported from Development to Quality,Changes were reflected in Q system.After testing in Q system transports were pushed to production system.The new value field is added to the operating concern. When i check the log for KEA0 in production system it displayed one message like:
Field VV088 was added to the reference structure
Message no. KE782.You probably either changed the operating concern or SAP-EIS aspect, and added the field VV099 to the definition.
The added a CO-PA value field:
In this case, the field is added to the definition or the summarization levels. This invalidates all existing levels. Consequently, you need to activate them again and fill them with data.
In production system maintaining operating concenr or KEAO is only in display mode.Is it needed to regenerate the operating concern once again in production, how to do it. Is the message talking about the KEDV summarization levels.?
thanks
rahulHi,
No no ....KEDV is nothing to do here....that is creation of summarization in CO-PA.
Since you added new value field you necessarily have to Regenerate the operating concern...
Use Tcode KEA0...go to Environment tab...there the status of Cross client part and client specific part both will be in RED....now just click on the Cross client (candle button)...now the system would regenerate the operating concern...once it is over do the same for the client specific...
Beware when you do regenerate the operating concern no body can enter any transaction in that server since it is cross client table ...hence better do it after business hours.
Hope this helps!
Running KEDU with rebuild is relevant only when you already have created summarization and called up the same in the CO-PA report "options" tab. If you did not created the summarization you are nothing to do with KEDU.
Next: The new value field has to be transported to PRD and hence even in PRD we have to do the regeneration manually.
Regards,
Velumani
Message was edited by: Velumani Arunachalam
Message was edited by: Velumani Arunachalam -
I have added a new field in IT0006 ,Now when try to create a new record for
Hi Experts,
I have added a new field in IT0006 ,Now when try to create a new record for a employee.
1,If I give the SUBTY in the PA30 screen getting an error "Don't Specify a subty error"
if and remove the subty and press CREATE button popup's comes and list the subty values.......It was allowing me to enter the subty in the PA30 screen prior to my new field addition in IT0006... is't a problem with the new field addition?
2, After I choose the subty value from the pop-up I am able to see the next screen....BUT GETTING AN INFORMATION MESSAGE THAT "Assignment to feature P0006 did not take place"?
3,, In the next screen after I have passed all mandatory fields while attempting SAVE I am getting an error called " Time constraint table in T777D is incorrect" what could be the cause?How are u adding fields to table using append in se11 or pm01.
if you are adding fields using se11 delete it and add it0005 in transaction pm01 and generate object.
add fields to structure CI_XX_R0005 and generate screen and maintain entry and screen in maintance view add entry and activate program.
Maybe you are looking for
-
Setting up more than one Ipod on same computer
I have had an Ipod for a year. My wife just purchased one and wants to set it up on my computer. Can she use my same computer yet not use my Ipod downloads???
-
I currently run 2 Mac's. MacBook Air which is my main computer and a Mac mini. I have been running match for a very long time without too much issue. I recently added the Mac mini to match to download all my music in the cloud to this computer. It di
-
How do I downgrade my MacBook Pro Retina Display from Mountain Lion to Lion?
I have a brand new MacBook Pro Retina Display that came with OS X 10.8.1. I´m an audio engineer so I work with Pro Tools, tons of plug-ins etc... Some of my software doesn't work with Mountain Lion just yet. Some of them haven't upgraded, and some of
-
just started using Aperture, after import, I created few albums from those photos in the open project. can I now delete that project? will photos stay in the albums for later use. thanks
-
I was listening to music on my 5th generation iPod when it froze.. And I tried to reset it and the screen turned black, and then it said: Connect to your computer. Use iTunes to restore. So ofcourse that's what I did, but it wouldn't restore because