Table that has requests currently IN cube?
Hello,
I am trying to find a way using ABAP to get a list of all requests currently in an InfoCube. I am not looking for all the requests ever in the cube as some tables have, JUST the requests currently available under "Manage" on the cube. Does anyone know how to do this?
All I've been finding is tables with ALL requests that have ever been on the cube, not just current reportable requests on the cube. Anyone know how to do this?
Thanks for looking,
-Gary
Hi Frined,
as the table RSICCONT showing all the requests in the cube, which you have been selected, you can select the timestap colum > by filtering in Assending order > in this way you can findout the last load to that particular data target as well as the request .
i am assuming this is as a alternative to findout the latest request from table.
Regards.
Edited by: Rambabu velanati on Nov 3, 2009 4:31 PM
Similar Messages
-
Table that has the hier text names and the corresponding hier ID
Hi,
Would anyone happen to know the table that has the hier name text as it appears from the infoObject level and the corresponding Internal hierarchy ID (unique ID) for data element RSHIEID. I would want ot be bale to match the text name o f the hier to the hier ID.
Thanks
WillTrying to make it simpler taking the 0material hierarchy note that the 0material has been loaded with 3 different hierarchies:
fields in the H table:
HIEID - 434FLR9O6DX0XXJS3CLIYZODD (Refers to the particular hierarchy as mentioned I have 3 hierarchies loaded to 0Material)
OBJVERS - Active and so on
NODEID - 4 digit internal number of the hierarchy
These are the Keys that identifies the hierarchy uniquely in my case the 1st hierarchy.
Now if you want to find the nodes then based on the example above I will take the hierarchy id ie 434FLR9O6DX0XXJS3CLIYZODD for the field HIEID that would give me all the nodes of this hierarchy
Note: the HIEID for a particular hierarchy can be found from the HEADER info
Thanks,
Raj -
Import to new table that has additional fields
Hi Everyone,
I am trying to migrate a table to a new table that has the field sequence changed and also has a new field added. My main question is if it is possible to have datapump add values to the new field in the target table.
For example:
original table has fields a, b, d, c
new table has fields b, c, d, a, e
I want to load the new table and also include adding values for field e. In this case, field e is a year field, so it should be loaded with '2012'
Does datapump have the ability to do this? Is reorganizing the fields going to cause me any problems?
We are on oracle version 11.2.0.3remap data simply replaces data is a column. You can't populate additional columns when performing a data pump import. The internal code would have no idea what to put in that column and there is no user interface to tell Data Pump what to put in that column. REMAP_DATA simply replaces data in the specified column.
remap_data:schema.table:column:function
This function returns a single value and the column is populated with that value.
Dean -
Select Query failing on a table that has per sec heavy insertions.
Hi
Problem statement
1- We are using 11g as an database.
2- We have a table that is partitioned on the date as range partition.
3- The insertion of data is very high.i.e. several hundreds records per sec. in the current partitioned.
4- The data is continuously going in the current partitioned as and when buffer is full or per sec timer expires.
5-- We have to make also select query on the same table and on the current partitioned say for the latest 500 records.
6- Effecient indexes are also created on the table.
Solutions Tried.
1- After analyzing by tkprof it is observed that select and execute is working fine but fetch is taking too much time to show the out put. Say it takes 1 hour.
2- Using the 11g sql advisior and SPM several baseline is created but the success rate of them is observed also too low.
please suggest any solution to this issue
1- i.e. Redisgn of table.
2- Any better way to quey to fix the fetch issue.
3- Any oracle seetings or parameter changes to fix the fetch issue.
Thanks in advance.
Regards
Vishal SharmaI am uploading the latest stats please let me know how can improve as this is taking 25 minutes
####TKPROF output#########
SQL ID : 2j5w6bv437cak
select almevttbl.AlmEvtId, almevttbl.AlmType, almevttbl.ComponentId,
almevttbl.TimeStamp, almevttbl.Severity, almevttbl.State,
almevttbl.Category, almevttbl.CauseCode, almevttbl.UnitType,
almevttbl.UnitId, almevttbl.UnitName, almevttbl.ServerName,
almevttbl.StrParam, almevttbl.ExtraStrParam, almevttbl.ExtraStrParam2,
almevttbl.ExtraStrParam3, almevttbl.ParentCustId, almevttbl.ExtraParam1,
almevttbl.ExtraParam2, almevttbl.ExtraParam3,almevttbl.ExtraParam4,
almevttbl.ExtraParam5, almevttbl.SRCIPADDRFAMILY,almevttbl.SrcIPAddress11,
almevttbl.SrcIPAddress12,almevttbl.SrcIPAddress13,almevttbl.SrcIPAddress14,
almevttbl.DESTIPADDRFAMILY,almevttbl.DestIPAddress11,
almevttbl.DestIPAddress12,almevttbl.DestIPAddress13,
almevttbl.DestIPAddress14, almevttbl.DestPort, almevttbl.SrcPort,
almevttbl.SessionDir, almevttbl.CustomerId, almevttbl.ProfileId,
almevttbl.ParentProfileId, almevttbl.CustomerName, almevttbl.AttkDir,
almevttbl.SubCategory, almevttbl.RiskCategory, almevttbl.AssetValue,
almevttbl.IPSAction, almevttbl.l4Protocol,almevttbl.ExtraStrParam4 ,
almevttbl.ExtraStrParam5,almevttbl.username,almevttbl.ExtraStrParam6,
IpAddrFamily1,IPAddrValue11,IPAddrValue12,IPAddrValue13,IPAddrValue14,
IpAddrFamily2,IPAddrValue21,IPAddrValue22,IPAddrValue23,IPAddrValue24
FROM
AlmEvtTbl PARTITION(ALMEVTTBLP20100323) WHERE AlmEvtId IN ( SELECT * FROM
( SELECT /*+ FIRST_ROWS(1000) INDEX (AlmEvtTbl AlmEvtTbl_Index) */AlmEvtId
FROM AlmEvtTbl PARTITION(ALMEVTTBLP20100323) where ((AlmEvtTbl.Customerid
= 0 or AlmEvtTbl.ParentCustId = 0)) ORDER BY AlmEvtTbl.TIMESTAMP DESC)
WHERE ROWNUM < 602) order by timestamp desc
call count cpu elapsed disk query current rows
Parse 1 0.10 0.17 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 42 1348.25 1521.24 1956 39029545 0 601
total 44 1348.35 1521.41 1956 39029545 0 601
Misses in library cache during parse: 1
Optimizer mode: FIRST_ROWS
Parsing user id: 82
Rows Row Source Operation
601 PARTITION RANGE SINGLE PARTITION: 24 24 (cr=39029545 pr=1956 pw=1956 time=11043 us cost=0 size=7426 card=1)
601 TABLE ACCESS BY LOCAL INDEX ROWID ALMEVTTBL PARTITION: 24 24 (cr=39029545 pr=1956 pw=1956 time=11030 us cost=0 size=7426 card=1)
601 INDEX FULL SCAN ALMEVTTBL_INDEX PARTITION: 24 24 (cr=39029377 pr=1956 pw=1956 time=11183 us cost=0 size=0 card=1)(object id 72557)
601 FILTER (cr=39027139 pr=0 pw=0 time=0 us)
169965204 COUNT STOPKEY (cr=39027139 pr=0 pw=0 time=24859073 us)
169965204 VIEW (cr=39027139 pr=0 pw=0 time=17070717 us cost=0 size=13 card=1)
169965204 PARTITION RANGE SINGLE PARTITION: 24 24 (cr=39027139 pr=0 pw=0 time=13527031 us cost=0 size=48 card=1)
169965204 TABLE ACCESS BY LOCAL INDEX ROWID ALMEVTTBL PARTITION: 24 24 (cr=39027139 pr=0 pw=0 time=10299895 us cost=0 size=48 card=1)
169965204 INDEX FULL SCAN ALMEVTTBL_INDEX PARTITION: 24 24 (cr=1131414 pr=0 pw=0 time=3222624 us cost=0 size=0 card=1)(object id 72557)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 42 0.00 0.00
SQL*Net message from client 42 11.54 133.54
db file sequential read 1956 0.20 28.00
latch free 21 0.00 0.01
latch: cache buffers chains 9 0.01 0.02
SQL ID : 0ushr863b7z39
SELECT /* OPT_DYN_SAMP */ /*+ ALL_ROWS IGNORE_WHERE_CLAUSE
NO_PARALLEL(SAMPLESUB) opt_param('parallel_execution_enabled', 'false')
NO_PARALLEL_INDEX(SAMPLESUB) NO_SQL_TUNE */ NVL(SUM(C1),0), NVL(SUM(C2),0)
FROM
(SELECT /*+ IGNORE_WHERE_CLAUSE NO_PARALLEL("PLAN_TABLE") FULL("PLAN_TABLE")
NO_PARALLEL_INDEX("PLAN_TABLE") */ 1 AS C1, CASE WHEN
"PLAN_TABLE"."STATEMENT_ID"=:B1 THEN 1 ELSE 0 END AS C2 FROM
"SYS"."PLAN_TABLE$" "PLAN_TABLE") SAMPLESUB
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.00 0.01 1 3 0 1
total 3 0.00 0.01 1 3 0 1
Misses in library cache during parse: 1
Misses in library cache during execute: 1
Optimizer mode: ALL_ROWS
Parsing user id: 82 (recursive depth: 1)
Rows Row Source Operation
1 SORT AGGREGATE (cr=3 pr=1 pw=1 time=0 us)
0 TABLE ACCESS FULL PLAN_TABLE$ (cr=3 pr=1 pw=1 time=0 us cost=29 size=138856 card=8168)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 1 0.01 0.01
SQL ID : bjkdb51at8dnb
EXPLAIN PLAN SET STATEMENT_ID='PLUS30350011' FOR select almevttbl.AlmEvtId,
almevttbl.AlmType, almevttbl.ComponentId, almevttbl.TimeStamp,
almevttbl.Severity, almevttbl.State, almevttbl.Category,
almevttbl.CauseCode, almevttbl.UnitType, almevttbl.UnitId,
almevttbl.UnitName, almevttbl.ServerName, almevttbl.StrParam,
almevttbl.ExtraStrParam, almevttbl.ExtraStrParam2, almevttbl.ExtraStrParam3,
almevttbl.ParentCustId, almevttbl.ExtraParam1, almevttbl.ExtraParam2,
almevttbl.ExtraParam3,almevttbl.ExtraParam4,almevttbl.ExtraParam5,
almevttbl.SRCIPADDRFAMILY,almevttbl.SrcIPAddress11,almevttbl.SrcIPAddress12,
almevttbl.SrcIPAddress13,almevttbl.SrcIPAddress14,
almevttbl.DESTIPADDRFAMILY,almevttbl.DestIPAddress11,
almevttbl.DestIPAddress12,almevttbl.DestIPAddress13,
almevttbl.DestIPAddress14, almevttbl.DestPort, almevttbl.SrcPort,
almevttbl.SessionDir, almevttbl.CustomerId, almevttbl.ProfileId,
almevttbl.ParentProfileId, almevttbl.CustomerName, almevttbl.AttkDir,
almevttbl.SubCategory, almevttbl.RiskCategory, almevttbl.AssetValue,
almevttbl.IPSAction, almevttbl.l4Protocol,almevttbl.ExtraStrParam4 ,
almevttbl.ExtraStrParam5,almevttbl.username,almevttbl.ExtraStrParam6,
IpAddrFamily1,IPAddrValue11,IPAddrValue12,IPAddrValue13,IPAddrValue14,
IpAddrFamily2,IPAddrValue21,IPAddrValue22,IPAddrValue23,IPAddrValue24 FROM
AlmEvtTbl PARTITION(ALMEVTTBLP20100323) WHERE AlmEvtId IN ( SELECT * FROM
( SELECT /*+ FIRST_ROWS(1000) INDEX (AlmEvtTbl AlmEvtTbl_Index) */AlmEvtId
FROM AlmEvtTbl PARTITION(ALMEVTTBLP20100323) where ((AlmEvtTbl.Customerid
= 0 or AlmEvtTbl.ParentCustId = 0)) ORDER BY AlmEvtTbl.TIMESTAMP DESC)
WHERE ROWNUM < 602) order by timestamp desc
call count cpu elapsed disk query current rows
Parse 1 0.28 0.26 0 0 0 0
Execute 1 0.01 0.00 0 0 0 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.29 0.27 0 0 0 0
Misses in library cache during parse: 1
Optimizer mode: FIRST_ROWS
Parsing user id: 82
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 1 0.00 0.00
SQL*Net message from client 1 0.00 0.00
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 13 0.71 0.96 3 10 0 0
Execute 14 0.20 0.29 4 304 26 21
Fetch 92 2402.17 2714.85 3819 70033708 0 1255
total 119 2403.09 2716.10 3826 70034022 26 1276
Misses in library cache during parse: 10
Misses in library cache during execute: 6
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 49 0.00 0.00
SQL*Net message from client 48 29.88 163.43
db file sequential read 1966 0.20 28.10
latch free 21 0.00 0.01
latch: cache buffers chains 9 0.01 0.02
latch: session allocation 1 0.00 0.00
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 940 0.51 0.73 1 2 38 0
Execute 3263 1.93 2.62 7 1998 43 23
Fetch 6049 1.32 4.41 214 12858 36 13724
total 10252 3.78 7.77 222 14858 117 13747
Misses in library cache during parse: 172
Misses in library cache during execute: 168
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 88 0.04 0.62
latch: shared pool 8 0.00 0.00
latch: row cache objects 2 0.00 0.00
latch free 1 0.00 0.00
latch: session allocation 1 0.00 0.00
34 user SQL statements in session.
3125 internal SQL statements in session.
3159 SQL statements in session.
Trace file: ora11g_ora_2064.trc
Trace file compatibility: 11.01.00
Sort options: default
6 sessions in tracefile.
98 user SQL statements in trace file.
9111 internal SQL statements in trace file.
3159 SQL statements in trace file.
89 unique SQL statements in trace file.
30341 lines in trace file.
6810 elapsed seconds in trace file.
###################################### AutoTrace Output#################
Statistics
3901 recursive calls
0 db block gets
39030275 consistent gets
1970 physical reads
140 redo size
148739 bytes sent via SQL*Net to client
860 bytes received via SQL*Net from client
42 SQL*Net roundtrips to/from client
73 sorts (memory)
0 sorts (disk)
601 rows processed -
Rename a column on a table that has fulltext index on the renaming column
I have to rename a column on a table, which has an fulltext assigned to the specified column.
Will this make the fulltext crash or in any other way have a effect to the fulltext search ???
And/Or do i need to alter the fulltext also ?
PS: TSQL Example would be nice ;)
Best regards
PawBest course of action is to drop the index, rename the column, create the index.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014 -
SQL Loader - Loading Text File into Oracle Table that has carriage returns
Hi All,
I have a text file that I need to load into a table in Oracle using SQL Loader. I'm used to loading csv or comma delimited files into Oracle so I'm not sure what the syntax is when it comes to loading a text file that essentially has one value per row and each row is separated by a carriage return. So when you open the text file, the records look like this:
999999999 <CRLF>
888888889 <CRLF>
456777777 <CRLF>
456555535 <CRLF>
345688888 <CRLF>
So each row is separated by a hard return and I need to tell sql loader that the hard return or next row is the next value to insert into the table. Below is an example of a control file I tend to use as a template for loading csv files but I need to modify it to accomodate this new structure.
OPTIONS (DIRECT=TRUE,ROWS=100000)
UNRECOVERABLE
LOAD DATA
INFILE 'C:\input.txt'
BADFILE 'C:\input.bad'
APPEND
INTO TABLE TEST_TABLE
FIELDS TERMINATED BY ","
TRAILING NULLCOLS
COLUMN_1
How to I modify the control file above to use hard returns as the field/row delimiter for my text file?
ThanksHi there,
Obviously my intention wasn't to post the same message 4 times....I pressed the "Submit Message" button but the submission hung and I pressed it a few times and finally it worked but it created several versions of my post. You need to allow users the ability to delete there own postings...I was looking for this option but didn't have it.
Sorry -
How to update a table that has hundred thousand rows?
Hi all !
I detect that I did wrong with column SHAPE (in GRAG table ) ,namely at Gtype : 3003
(MDSYS.SDO_GEOMETRY(3003,50632625,'null',MDSYS.SDO_ELEM_INFO_ARRAY(1,5,1,1,2,1),MDSYS.SDO_ORDINATE_ARRAY(276.2339,-179.7433,0,276.2498,-179.7361, 0 ))
And I need to update value Gtype :3003 to 3002 .
My problem is I don't know how to implement it because GRAG table has 30000 rows . I cannot update every row manually .
Do you have any advice ?AFAIK oracle11g cannot simply update SDO_GEOMETRY.
so you have to create new SDO_GEOMETRY with all but one old values.
try to modify this (I wrote it once to circumvent the cannot modify SDO_GEOMETRY problem):
-- clones a geometry but with different values
-- we can "alter" the SRID
-- note: oracle 11g cannot modify geometries
function alter_geometry(p_geo sdo_geometry, p_srid number default null)
return sdo_geometry is
v_result sdo_geometry;
v_srid number;
begin
if p_srid is null then
v_srid := p_geo.SDO_SRID;
else
v_srid := p_srid;
end if;
v_result := sdo_geometry(p_geo.SDO_GTYPE,
v_srid,
p_geo.SDO_POINT,
p_geo.SDO_ELEM_INFO,
p_geo.SDO_ORDINATES);
return v_result;
end alter_geometry;
--then do an update like
--test before with an create table as select
update crack c set c.shape = alter_geometry(shape, ...) -
How to update a table that has Million Records
Hi,
Lets consider the basic EMP table and lets assume that it has around 20 Million Records . we need to have an update statement.Normal UPdate statement may hang the system or it may take a lot of time.
The basic or Normal update statement goes like this and hope it may not work.
update emp set hiredate = sysdate where comm is null and hiredate is null;Basic statement may not work. sugestions Needed.
Regards,
Vineshsri wrote:
I heard Bulk collect will resolve these type of issues and i am really poor at Bulk Collect concepts.Exactly what type of issue are you concerned with? The business requirements here are pretty important-- what problem is the UPDATE causing, specifically, that you are trying to work around.
so looking for a solution to the problem using Bulk Collect .Without knowing the problem, it's very tough to suggest a solution. If you process data in batches using BULK COLLECT, your UPDATE statement will take longer to run and will consume more resources on the database. If the problem you are trying to solve is that your UPDATE is not fast enough, this is a poor approach.
On the other hand, if you process data in batches, and do interim commits, you can probably hold locks on individual rows for a shorter amount of time. That would only be a concern, though, if you have some other process that is trying to update the same rows that you are updating at the same time that you're updating them, which is pretty rare. And breaking your update into multiple transactions introduces a whole bunch of complexity. You now have to write a bunch of code to ensure that your process is restartable should the update fail mid-way through leaving some number of updates committed and some number rolled back. You have to have a very detailed understanding of the data and data consistency to ensure that breaking up the transaction isn't going to negatively impact any process, report, etc. To do it correctly is a pile of work and then it's something that is constantly at risk of creating problems in the future when requirements change.
In the vast majority of cases, you're better off issuing a simple SQL statement during a time when the system isn't particularly busy.
Justin -
Truncate table that has 2 billion rows
Hi,
Our DB is 11g and approximately any idea howmuch time it takes and do we need to rebuild indexes after truncate?>
Our DB is 11g and approximately any idea howmuch time it takes and do we need to rebuild indexes after truncate?
>
Before you do that - do you plan to reload the table with a similar amount of data?
If so then you might want to use the REUSE STORAGE clause so that Oracle doesn't have to deallocate and then immediately reallocate the storage.
See the SQL Language doc
http://docs.oracle.com/cd/B28359_01/server.111/b28286/statements_10007.htm
>
REUSE STORAGE Specify REUSE STORAGE to retain the space from the deleted rows allocated to the table. Storage values are not reset to the values when the table or cluster was created. This space can subsequently be used only by new data in the table or cluster resulting from insert or update operations. This clause leaves storage parameters at their current settings.
>
If you plan to do a large reload you should consider dropping or disabling the indexes and then adding/rebuilding them after the data load. -
Unable to create new entry in table that has no primary key
Hi
I have a table which is required to have no primary key (except mandt). After i generate table maintanance, when I go to create new entries, the table control to enter the new values does not appear. When I click on edit->new entries, it goes back to the fields tab of the table. Same when i check through SM30.
If i maintain atleast one primary key, I am able to get the table control in new entries screen. However the requirement permits no primary keys except mandt. How can this be resolved?
Thanks
NMHi,
THE PROBLEM WITH UR TABLE IS
YOU HAD DECLARED MANDT AS THE PRIMARY KEY AND THERE IS NO OTHER KEY IN UR TABLE
iT'S NOT ALLOWING YOU TO ADD NEW ENTRIES BECAUSE MANDT IS THE ONLY PRIMARY KEY IN YOUR TABLE AND IT WILL HAVE A DEFAULT VALUE BASED ON THE CLIENT. SO IT'S NOT SHOWING YOU THE CREATE NEW ENTRIES OPTION.
SO TRY TO PUT ONE MORE FIELD AS THE PRIMARY KEY SO THAT YOUR PROBLEM WILL SOLVE VERY EASILY ALSO MAKE SURE THAT TABLE IS ACTIVATED.
REVERT IF U NEED SOME MORE HELP
Thanks &Regards.
Pavan. -
Problem with inserting into table that has autogenerated primary key
hi
i am working on EJB3.
i am trying to insert object into table.Primary key of table will be generated automatically.I tried following statement for insertion,
em.persistent(customerObj);
but it throw following exception,
javax.ejb.EJBException: javax.persistence.PersistenceException: org.hibernate.id.IdentifierGenerationException: ids for this class must be manually assigned before calling save(): customer.CustomerInfo
at org.jboss.ejb3.tx.Ejb3TxPolicy.handleExceptionInOurTx(Ejb3TxPolicy.java:69)
at org.jboss.aspects.tx.TxPolicy.invokeInOurTx(TxPolicy.java:83)
at org.jboss.aspects.tx.TxInterceptor$Required.invoke(TxInterceptor.java:191)
at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:101)
at org.jboss.aspects.tx.TxPropagationInterceptor.invoke(TxPropagationInterceptor.java:76)
at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:101)
at org.jboss.ejb3.stateless.StatelessInstanceInterceptor.invoke(StatelessInstanceInterceptor.java:62)
at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:101)
at org.jboss.aspects.security.AuthenticationInterceptor.invoke(AuthenticationInterceptor.java:77)
at org.jboss.ejb3.security.Ejb3AuthenticationInterceptor.invoke(Ejb3AuthenticationInterceptor.java:102)
at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:101)
at org.jboss.ejb3.ENCPropagationInterceptor.invoke(ENCPropagationInterceptor.java:47)
at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:101)
at org.jboss.ejb3.asynchronous.AsynchronousInterceptor.invoke(AsynchronousInterceptor.java:106)
at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:101)
at org.jboss.ejb3.stateless.StatelessContainer.localInvoke(StatelessContainer.java:211)
at org.jboss.ejb3.stateless.Stateles
can anyone tell me is there any other way to acheive the same.
i thought of doing using insert query,but i am not sure about the syntax to be used.
could anyone help me ?
thanks in advance...That's why you should use PreparedStatement instead of Statement. Its setString() method will escape that value for you properly when you bind it.
% -
I am trying to create an external content type for a specific list. The problem is that there are so many columns (more than 200) that I get the error:
The operation(s) generation creates an SQL query which exceeds the length limit in Business Data
Connectivity Metadata Store. The operation(s) will not be generated. Recreate
the operation(s) with less number of columns in the configuration.
I tried turning off a dozen columns and I am still getting this error. I am nearing the limit of the "extra" columns I can eliminate.
What is the actual limit on number of columns?
Thank you.Hi,
From my research, it seems to be the limitation in response TTL and response size. To confirm
it, would you please check the detailed errors logged in ULS log? <o:p></o:p>
If you identified the threshold has be reached, you may follow this link to increase
the threshold according to your business requirement.<o:p></o:p>
http://blogs.msdn.com/b/bcs/archive/2010/02/16/bcs-powershell-introduction-and-throttle-management.aspx
Miles LI TechNet Community Support -
Selection color not working with table that has DefaultTableModel
hi folks,
I noticed if a table has a AbstractTableModel, when you select a row, by default the highlight color is light blue. However, if a table has a DefaultTableModel, even if you invoke table.setSelectionBackgroun(color) and table.setSelectionForefround(color), the highlight color stays invisible. is this a bug? what's the cause of this problem?
thanks!!Read this section from the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/components/table.html#renderer]Using Table Renderers. Here is a simple example to get you started
class SimpleRenderer extends DefaultTableCellRenderer
public Component getTableCellRendererComponent(
JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column)
super.getTableCellRendererComponent(table, value, isSelected, hasFocus, row, column);
if (hasFocus)
setBackground( Color.cyan );
else if (isSelected)
setBackground( table.getSelectionBackground() );
else
setBackground( table.getBackground() );
return this;
} -
How to update a table that has around 1 Million Records
Hi,
Lets take the basic emp table for our Referenece and lets assume that it contains around 60000 Records and all the deptno in that table are Initially 10. Please provide an update statement which would update deptno column of EMP table((based on) order by EMPNO) in for every 120 records incrementing by 1.(DeptNo to be incremented by 1,like 10 ,11 , 12 etc).
First 120 Records deptno should be 10,
Next 120 Records deptno should be 11, and so on.
For Last 120 records deptno should be updated with 500.
Please advise.
Regards,Ok, I've done it on a smaller set, incrementing every 5 records...
SQL> ed
Wrote file afiedt.buf
1 update emp2 set deptno = (select newdeptno
2 from (select empno, 10+floor((row_number() over (order by empno)-1)/5) as newdeptno
3 from emp2
4 ) e2
5 where e2.empno = emp2.empno
6* )
SQL> /
14 rows updated.
SQL> select * from emp2;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7369 SMITH CLERK 7902 17-DEC-1980 00:00:00 800 10
7499 ALLEN SALESMAN 7698 20-FEB-1981 00:00:00 1600 300 10
7521 WARD SALESMAN 7698 22-FEB-1981 00:00:00 1250 500 10
7566 JONES MANAGER 7839 02-APR-1981 00:00:00 2975 10
7654 MARTIN SALESMAN 7698 28-SEP-1981 00:00:00 1250 1400 10
7698 BLAKE MANAGER 7839 01-MAY-1981 00:00:00 2850 11
7782 CLARK MANAGER 7839 09-JUN-1981 00:00:00 2450 11
7788 SCOTT ANALYST 7566 19-APR-1987 00:00:00 3000 11
7839 KING PRESIDENT 17-NOV-1981 00:00:00 5000 11
7844 TURNER SALESMAN 7698 08-SEP-1981 00:00:00 1500 0 11
7876 ADAMS CLERK 7788 23-MAY-1987 00:00:00 1100 12
7900 JAMES CLERK 7698 03-DEC-1981 00:00:00 950 12
7902 FORD ANALYST 7566 03-DEC-1981 00:00:00 3000 12
7934 MILLER CLERK 7782 23-JAN-1982 00:00:00 1300 12
14 rows selected.but the principle would be the same. -
Hello,
Recently, I had a task where I needed to install a custom non-signed driver onto my Windows 8 64-bit setup. As it is known, Windows has driver enforcement policies that, as a security measure, do not allow you to install non-signed drivers.
I did not want to alter my current boot configuration so I decided to create a separate boot entry that would have driver signing policies disabled. For some reason I did not find any good source that would contain a step-by-step instruction on completing
this task, so I decided that I'd better share my experience here.
Lastly, there are multiple ways how you could turn off driver enforcement policies, but I find the way to do this via boot manager.
Here's how you can do that.
1. Press WindowsKey and type 'cmd' (without quotes) to find Command prompt, then click Command prompt icon. If you have User Account Control turned on, hold Ctrl+Shift keys pressed when clicking the icon.
This will force Windows to ask you for elevation of command prompt. Elevation is necessary for editing Boot Configuration Database (BCD), the database used by Windows boot manager to store boot settings.
2. In the User Account Control window click Yes to confirm elevation of command shell.
3. At the command prompt type
bcdedit
to list your BCD entries.
This will give you an output like:
Windows Boot Manager
identifier {bootmgr}
device partition=\Device\HarddiskVolume2
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-US
inherit {globalsettings}
integrityservices Enable
default {current}
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
displayorder {a329b5d0-fb29-11e1-a74d-f2c962d62240}
{a329b5cc-fb29-11e1-a74d-f2c962d62240}
{a329b5ca-fb29-11e1-a74d-f2c962d62240}
{a329b5c2-fb29-11e1-a74d-f2c962d62240}
{current}
{a329b5d8-fb29-11e1-a74d-f2c962d62240}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
identifier {a329b5d0-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8prowmc01.vhdx
path \Windows\system32\winload.efi
description Windows 8
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5d1-fb29-11e1-a74d-f2c962d62240}
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8prowmc01.vhdx
systemroot \Windows
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
The section that starts with Windows Boot Manager lists current settings for the boot menu. Here you find what boot entry is chosen by default, this is the one what you will boot into if you do not select any boot entry in the
boot menu.
The following record
default {current}
indicates that by default my Windows boots into configuration which I use at the moment (currently booted Windows configuration).
To find out what exactly is current configuration, look into the list of boot entries, records that contain boot loader configuration and are titled as Windows Boot Loader in the bcdedit output.
For example, the entry shown above is one of my boot configurations. This is one of the boot entries listed on the boot manager screen when I start my PC and it looks like:
Windows Boot Loader
identifier {a329b5d0-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8prowmc01.vhdx
path \Windows\system32\winload.efi
description Windows 8
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5d1-fb29-11e1-a74d-f2c962d62240}
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8prowmc01.vhdx
systemroot \Windows
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
This record has a unique GUID identifier that can be used to reference this boot entry, which is:
identifier {a329b5d0-fb29-11e1-a74d-f2c962d62240}
If we look at the Windows Boot Manager settings, we'll see this entry is the first in order to be displayed in the boot menu on OS start (I marked the unique bits):
displayorder {a329b5d0-fb29-11e1-a74d-f2c962d62240}
{a329b5cc-fb29-11e1-a74d-f2c962d62240}
It references my VHD drive, a virtual hard drive where my Windwos 8 setup is residing:
device vhd=[D:]\win8prowmc01.vhdx
And it also specifies that the boot manager must use UEFI BIOS extension code to access my Windows boot partition:
path \EFI\Microsoft\Boot\bootmgfw.efi
3. Now locate the current boot entry.
Current boot entry contains boot settings used to boot into Windows configuration to which you are currently booted. It is referenced in the list of boot entries as a Windows Boot Loader record that has the {current} keyword inside and may
look like:
Windows Boot Loader
identifier {current}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description Windows 8 Enterprise RTM
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
Because we are more than happy with current configuration and want to base our new boot configuration on these settings, we need to copy this boot entry ({current}) to a new boot entry.
This is done by running the following command:
C:\Windows\system32>bcdedit /copy {current} /d "No Driver Signature Check"
Parameter /d here indicates that the following sequence of characters specifies the display name for the new boot entry that we are creating. The name inside the double quotes will be displayed in the boot menu when you boot your Windows.
In other words, if you know restart your system, you'll see the new No Driver Signature Check in the boot menu.
When copied, the entry is automatically given a new GUID identifier, so upon running the command above, you'll see the following line returned (you'll have an other GUID since these are unique identifiers):
The entry was successfully copied to {a329b5d8-fb29-11e1-a74d-f2c962d62240}.
4. Make sure the entry has been successfully created.
Run the same bcdedit. (You may specify /enum or /v, or both /enum /v parameters at the prompt to get more detail about boot entries, but simple bcdedit is just enough to see the new entry):
C:\Windows\system32>bcdedit
Windows Boot Manager
identifier {bootmgr}
device partition=\Device\HarddiskVolume2
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-US
inherit {globalsettings}
integrityservices Enable
default {current}
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
displayorder {a329b5d0-fb29-11e1-a74d-f2c962d62240}
{a329b5cc-fb29-11e1-a74d-f2c962d62240}
{a329b5ca-fb29-11e1-a74d-f2c962d62240}
{a329b5c2-fb29-11e1-a74d-f2c962d62240}
{current}
{a329b5d8-fb29-11e1-a74d-f2c962d62240}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
identifier {current}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description Windows 8 Enterprise RTM
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
Windows Boot Loader
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description No Driver Signature Check
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
The entry has been created and given a unique a329b5d8-fb29-11e1-a74d-f2c962d62240 ID. It now has exactly same boot settings as the boot entry we used to boot into current configuration of Windows.
5. Modify created No Driver Signature Check entry and specify that Windows must have driver integrity checks disabled when booted using this boot entry.
Any modifications to boot entries are made using /set parameter. To indicate that we modify a specific boot entry, we must specify the GUID for the No Driver Signature Check record, which is:
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
In other words, to edit (add or change) an option for the boot entry, we need to use the following command syntax:
C:\Windows\system32>bcdedit /set GUID <boot_option> [<option_value>]
First, we must specify that we don't want integrity checks be made. This is done by adding the loadoptions option and setting it to DISABLE_INTEGRITY_CHECKS value:
C:\Windows\system32>bcdedit /set {a329b5d8-fb29-11e1-a74d-f2c962d62240} loadopti
ons DISABLE_INTEGRITY_CHECKS
The operation completed successfully.
6. Verify that load option has been added.
Run the bcdedit command:
Windows Boot Loader
identifier {current}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description Windows 8 Enterprise RTM
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
Windows Boot Loader
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description No Driver Signature Check
locale en-US
loadoptions DISABLE_INTEGRITY_CHECKS
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
7. Add the option that turns on test signing mode and disables checks of driver signature.
Adding the testsigning option and setting it to ON does the trick for us:
C:\Windows\system32>bcdedit /set {a329b5d8-fb29-11e1-a74d-f2c962d62240} TESTSIGNING ON
8. Now we have a boot entry that enables Windows not to do integrity checks and digital signature validation.
We check it by running bcdedit:
Windows Boot Loader
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description No Driver Signature Check
locale en-US
loadoptions DISABLE_INTEGRITY_CHECKS
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
testsigning Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
9. Type 'exit' without quotes to exit from command prompt, and restart Windows.
Upon booting you will be present with a new boot option to start Windows in configuration that allows you to install custom non-signed drivers.
Hope this will help anybody to create their own custom boot configurations.
Well this is the world we live in And these are the hands we're given...Hi,
Thank you for sharing the solutions & experience here. It will be very beneficial for other community members who have similar questions.
Regards,
Kelvin hsu
TechNet Community Support
Maybe you are looking for
-
I can no longer use my mail, only can access through icloud. I have made no changes or updates to create this problem. TWC did take over my internet provider and suddenly I started have a myriad of issues. I am in the process of changing providers
-
How do i upgrade from 6.0.6 to the latest version of iPhoto . I have a mac pro with OS 10.7.5 ?
How do i upgrade from 6.0.6 to the latest version of iPhoto . I have a mac pro with OS 10.7.5 ?
-
ABAP question: define a custom foreign key for a standard field??
Hi, I want to use the field ADDR1_DATA-STR_SUPPL3 for customer use. I must to define a foreign key against a Ztable (as verification table) for this standard field. Also I must to define a custom search help. To defining a foreign key for this field,
-
Hi, Description of problem: DataSet dsComp= Created dataset by calling stored procedure In this dsComp, there is one table called tblContract which has 5 columns out of which one column has null value in every row. The stored proc correctly fetches 5
-
I clicked on "update all" on my apps and all updated but my TRX FORCE App. it kept asking me to retry even after I connected to WIFI and downloaded/updated to the latest itunes. Am I missing something else? This was an expensive app that I use everyd