Table used for displaying print/program name of smartforms
Hi All,
I need the table name which is used to display the print/program name for smartforms.
Thanks & Regards,
Santosh
check TNAPR , or tcode NACE .
regards
prabhu
Similar Messages
-
Print program name for the dunning form F150_FR_DUNN_01 in sapscript
Hi,
I am not getting the exact print program name for the dunning form F150_FR_DUNN_01 in sapscript. After an extensive search I have come across few names of print program like SAPF150D2 and SAPLF150. But still I am not understanding which one to use for the form and also how to use it. I am unable to understand which include I should use to write my code.
Kindly help me.
Thanking you.
Pujarini PatraHi,
Yes, you should be able to assign F150_FR_DUNN_01 in Dunning Forms customizing:
and yes, I too would absolutely try to go for either a Smartform or even a PDF Form (if i'd have all the necessary setup for them, like Adobe Document Services, in the system already). I have Basis 702 SP 0011and FINBASIS 600 SP 0021, so all the following technicalities refer to those releases:
The corresponding SAP sample Forms are:
- F150_DUNN_SF for Smartform; and
- F150_DUNN_SF for pdf Form (don't let the name confuse you )
I'm not entirely sure if it's a good idea to try to convert/migrate Sapscript to Smartform and the Smartform to PDF Form - have never done that myself and don't know how good/usable the migration result is. I just take the interface of Smartform from SAP and do the rest from scratch or by copying over the common parts of our existing custom forms.
There are the SAP Standard wrapper FMs for SF and PDF forms already in the System:
- FI_PRINT_DUNNING_NOTICE_SMARTF calling PRINT_DUNNING_NOTICE_SF and
- FI_PRINT_DUNNING_NOTICE_PDF calling PRINT_DUNNING_NOTICE_PDF.
So, theoretically, all you had to do to replace SapScripts (or even to enable all three form types) is to assign a custom BTE Event handler FM to event 1720 (for correct Application), which could detect, what type of form is assigned in Customizing and call the corresponding wrapper FM.
As a sample for coding PDF form wrapper call one could take FI_PSO_EVENT_00001720_PDF (if you have IS-PS) in the system. I'd take out the IS-PS specific "business logic" like posting dunning charges (if it does not apply to my solution) and add the logic to decide, which wrapper to call.
The confusing part about the customizing (Table T047E) to me is that there seems to be no form type defined anywhere in there... just the FORNR field for form name, which should apparently take the names of all three form types... I'd try to extend that table with custom Form type field and try to regenerate Table Maintenance dialog for view Cluster VC_T047_F... That would save the whole effort to try to detect the type for form assigned...
Another tip, in case you didn't know it already: you should be able to see all the Customizing paths, where T047E is involved, when you enter table name in SM30 and press "Customizing" and then "Continue w/o Specifying Project":
The selected entry is the one you are looking for to assing your custom forms, I believe.
cheers
Janis -
Using standard PO Printing Program for Smartforms
Hi Experts,
I am some hiccups coding my print program for a PO Smartform that am currently working on.The requirement was to use the standard print program to trigger my Smartform PO. I have read alot of threads on this, but am still clueless.
Some says to comment out the functions like "OPEN_FORM" ,"WRITE_FORM" and having your block of codes inside the "NEU_" routine.
But I noticed, there are even some conditions and logic checking before the "write_form" is called and sometimes the table entries are also cleared. In this kind of situation, how should I be passing the table data to the Smartform function module?By copying the contents to an internal table? And there are many include programs which currently the standard program has, should I be using all that too?
Appreciate your input and advice on this.
Thanks very much.Hi Neesha,
Can you check this once
[Migrating Forms|http://help.sap.com/saphelp_nw04/helpdata/en/9d/9599386185c064e10000009b38f8cf/content.htm]
Regards,
Madhu.
Edited by: madhurao123 on Dec 21, 2011 9:18 AM -
Wats d in-built print PROGRAM name for layout MEDRUCK???
wats d in-built print PROGRAM name for layout MEDRUCK??? and can we change it??
wat shud we do if we want2 change it??
i mean...assume we got a scenario in which we need ta use MEDRUCK layout n print progrm n change some text in it.. and d address and header in it..
how cud we do dis??Hi ,
The print program name for 'MEDRUCK' is <b>SAPFM06P</b>, it is not advisable to change the print program instead if you want to do any changes use Subroutines in the layout. Eg : PERFORM <Subroutine name> in PROGRAM <pname> USING <in_variables>
CHANGING <out_var>
ENDPERFORM.
Srini -
Standard smartform name and standard print program name for Sales Quotation
Hi,
I would like to know the standard smartform name and standard print program name which can be used for sales quotation through transaction VA23.
For eg: The standard output type for billing document (For T code VF03) is RD00 and it' smartform name is LB_BIL_INVOICE. It's print program name is RLB_INVOICE.
Similarly, I would like to know the standard smartform name and standard print program name for AN00 output type which is used for sales quotation. .
Regards,
ZahidHello
std driver prgram is /SMB40/RVADOR01
form entry is ENTRY
std smartforms is /SMB40/SDQUO_A an du can check this the in NACE tcode.
Output Type AN00 Quotation
Application V1 Sales
Program /SMB40/RVADOR01
Form Routine ENTRY
Form RVORDER01
PDF/Smartform Form /SMB40/SDQUO_A
Thank u,
santhosh -
Print program name for Adobeform
Hi,
I want to know how to identify the print program name to print adobeform if i know Adobeform name in FI and HR module.
Thanks
BhuavnaPost the solution as well so that it helps all, instead of just closing it with one word i.e. "resolved"
Have a look at [Rules of Engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement].
Chintan -
What are all the tables used for this report ? please reply
hai
i have practcing reports,
so any one give me the name of the tables used for the below report
<b>Created report for invoice details, shipping details and partner function.</b>
thanks in advance.
by
ashokHi Ashok,
I am sending you the code which will display tables present in SAP with the description and jump to datadic or SE16 by selecting plus F2 or F8.
REPORT ZZBGS044 MESSAGE-ID Z1 LINE-COUNT 65 LINE-SIZE 132
NO STANDARD PAGE HEADING.
Description: This program list all tables in regards to the *
selection criteria. *
Customizing: You need not to make any customizing to use this program*
Change of You only have to check that tables, functions and *
release: includes till exists. Bedst just to check and run the *
program. *
Programmer: Benny G. Sørensen *
Date: July 1995 *
SAP R/3 2.2F *
Corrections----
Date Userid Correction *
xx-xx-xxxx xxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx *
TABLES: DD02V "SAP tables view
DATA: BEGIN OF DYNTAB OCCURS 2000.
INCLUDE STRUCTURE BDCDATA.
DATA: END OF DYNTAB.
DATA: BEGIN OF TABLES OCCURS 100.
INCLUDE STRUCTURE DD02V.
DATA: END OF TABLES.
DATA: L TYPE I,
REPL(30) TYPE C VALUE '????????????????????????????'.
FIELD-SYMBOLS:
PARAMETERS:
TABLE(30) TYPE C,
TITLE(74) TYPE C LOWER CASE DEFAULT ' ',
DOWNLOAD(1) TYPE C DEFAULT ' ',
FILENAME(65) TYPE C DEFAULT 'c:SAPDOC?',
EXCEPT(30) TYPE C DEFAULT ' '.
START-OF-SELECTION.
IF TABLE = ''.
TABLE = '*' .
ENDIF.
IF TITLE = ''.
TITLE = '*' .
ENDIF.
TRANSLATE TABLE USING '*%'.
TRANSLATE TITLE USING '*%'.
CONDENSE EXCEPT NO-GAPS.
L = STRLEN( EXCEPT ).
IF L > 0.
ASSIGN REPL(L) TO
ENDIF.
SELECT * FROM DD02V INTO TABLES
WHERE DDLANGUAGE = SY-LANGU
AND TABNAME LIKE TABLE
AND DDTEXT LIKE TITLE.
HIDE DD02V-TABNAME.
IF EXCEPT NE ''.
REPLACE EXCEPT LENGTH L WITH
INTO TABLES-TABNAME.
ENDIF.
TRANSLATE TABLE USING '% '.
CONDENSE TABLE NO-GAPS.
IF TABLES-TABNAME CS TABLE.
WRITE:/ TABLES-TABNAME, ' ', TABLES-DDTEXT.
APPEND TABLES.
ENDIF.
ENDSELECT.
IF DOWNLOAD NE ''.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FILENAME
FILETYPE = 'WK1' "ASC, WK1, DBF, DAT, bin
TABLES
DATA_TAB = TABLES.
ENDIF.
AT LINE-SELECTION.
SET PARAMETER ID 'DOB' FIELD SY-LISEL(30) .
CALL TRANSACTION 'SE12' AND SKIP FIRST SCREEN.
AT PF8.
CHECK SY-LISEL <>
SET PARAMETER ID 'DTB' FIELD SY-LISEL(10) .
REFRESH DYNTAB.
PERFORM DYNPRO USING:
'X' 'SAPMSTAZ' '0100' "Selection screen
,' ' 'DD02V-TABNAME' SY-LISEL(10).
CALL TRANSACTION 'SE16' USING DYNTAB MODE 'A' .
FORM DYNPRO USING DYNBEGIN NAME VALUE.
IF DYNBEGIN = 'X'.
CLEAR DYNTAB.
MOVE : NAME TO DYNTAB-PROGRAM,
VALUE TO DYNTAB-DYNPRO,
DYNBEGIN TO DYNTAB-DYNBEGIN.
APPEND DYNTAB.
ELSE.
CLEAR DYNTAB.
MOVE: NAME TO DYNTAB-FNAM,
VALUE TO DYNTAB-FVAL.
APPEND DYNTAB.
ENDIF.
ENDFORM.
Regards,
Azaz Ali. -
How to find output type givenSapscript form name and print program name
Hi Experts,
Can anyone tell me how to find the output type of a sapscript form if the print program name and sapscript form name is
known.Hi,
There are two ways:
1. Use table TNAPR .. Here is table give PGNAM as your print program name and FONAM as form name.. Now the field KSCHL will be the output type assigned to your script.
2. You can also check the NACE t-code.. In that select a application(Corresponds to your area) -> click on Output types tab -> Here you get list of output type.. You need click on Processing Routine folder to get all other info.. -
What r the tables used for this report.
hi all..
i am a fresher for ABAP. i need the help.
what r the tables used for this report.
Reports provide pending order details according to Material wise and customer wise for particular month.
thanks in advance
RK.Ashokkumar.Hi Ashok,
this is easy to do.
Open Two SAP Screen with same user ID.
Run SQL trace using ST05 transaction.Open ST05 transaction in One and make
Trace on ,Run the report in another screen.
Once report run is over.End the trace process and click on display trace in same ST05 transaction.There is a click button on ST05 Transaction screen to start trace
process,End trace process and Display track process.
The SQL trace will give you all the table details which is used in that particular report.
You have not mentioned about the report name so I have suggested this way.
regards,nishant
Please reward if this helps -
How to fetch Print program name of a SAP script?
Hi abapers,
Could you please tell me how to fetch the name of a script's print program with the help of the script's name?
I have tried with table TNAPR and T-code NACE,it didnt help.
Is there any function module that returns the print program's name.
Please reply.
Thanks,
Suchi.hi ,
GOTO SE71 Txn
Enter standard script name.
Click on Display.
"in menu bar
"form------>Check--->text ----->press enter
Now you can view the standard print program name
Thanks & Regards -
How to check how many tables used in one particular program
Hi Gurus,
I am wondering how to check for how many tables are used for one particular program whether its a custom (Y* or Z* program) or
a sap program (R*) .I have tried ST05 .But its not satisfactory .Could u help me plz in this regard .
Thanks in Advance !!!!!!!!hi,
Go with the transaction se80
select type as the Progarm
in the below block provide your program name.....
there u can find the drop down of your object related tables, types, fields, etc.....go with the tables u can find the respective information of the tables....
or
go with the se30
and enter the program name...
and go with the trips and tricks....
u can find the drop down of the
abap objects performanceexamples....
and go with the required thing.....
then u can find the required....
Cheers,
Brahma -
Hi all,
i have smartform name .how we will find print program?
What is the output type and application for paychek?
please tell to me..
Thanks,
kisho.rethere are two ways
go to table TNAPR give ur smartform name and then u will get your program name
secondly if any putput type is associated with it then go to transaction NACE select application area then click output type and then get the print program name
~hitesh -
What r all the tables used for this report. please reply
hai,
what r all the tables used for this report.
report :
<b>
Report to display all finished goods that go out-of-stock. Developed a drill down report for materials details (totals and subtotals for material stock values by material group and material type).</b>
thanks in advancehi Ashok,
Check this out
http://www.allsaplinks.com/tables.html
http://www.sapgenie.com/abap/tables.htm
Regards,
Santosh -
Join 3 tables using FOR ALL ENTRIES
Hi,
I want to join 3 tables and show their result in a text file delimited by comma.
ITs a download program.Can someone tell me how to how to join the three table using for all entires instead of inner join.please give step by step illustrationHi,
Please check below code which downloads records from 3 tables into excel file.
if you want other file means you can specify other file type in the fm parameter
REPORT zstemp_qty2_ LINE-SIZE 255 .
DATA:it_vbak LIKE vbak OCCURS 0 WITH HEADER LINE.
DATA:v_file1 LIKE rlgrap-filename.
DATA:v_file2(80) TYPE c.
DATA:it_vbap LIKE vbap OCCURS 0 WITH HEADER LINE.
DATA:it_mara LIKE mara OCCURS 0 WITH HEADER LINE.
START-OF-SELECTION.
SELECT * FROM vbak INTO TABLE it_vbak UP TO 100 ROWS.
IF NOT it_vbak[] IS INITIAL.
SELECT * FROM vbap INTO TABLE it_vbap
FOR ALL ENTRIES IN it_vbak
WHERE vbeln = it_vbak-vbeln.
ENDIF.
LOOP AT it_vbap.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = it_vbap-matnr
IMPORTING
output = it_vbap-matnr.
MODIFY it_vbap TRANSPORTING matnr.CLEAR it_vbap.
ENDLOOP.
IF NOT it_vbap[] IS INITIAL.
SELECT * FROM mara INTO TABLE it_mara
FOR ALL ENTRIES IN it_vbap
WHERE matnr = it_vbap-matnr.
ENDIF.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = sy-cprog
dynpro_number = sy-dynnr
FIELD_NAME = ' '
IMPORTING
file_name = v_file1 .
v_file2 = v_file1.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = ' '
CODEPAGE = ' '
filename = v_file2
filetype = 'WK1'
MODE = ' '
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
col_select = '1'
COL_SELECTMASK = ' '
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = it_mara
FIELDNAMES =
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT it_mara.
WRITE:/ it_mara-matnr.
ENDLOOP.
Regds
Sivaparvathi
Please reward points if helpful..... -
What r all the tables used for the following report
hai
what r all the tables used for the following report
report:
<b>
Report that displays all the late shipments in a particular period of time</b>
send important fields for this tables also
thanks in advance.Hi,
Imp table are vttk,vttp,vtts.
Regards
Amole
Maybe you are looking for
-
Blinking menu bar, icons on desktop and Finder windows.
This happened after I restarted the computer for installing software updates. The only thing that didn't blink was the dock. When I open an application, it blinks as well, but a little slower, so that gives me time to click around. Even shutting down
-
Help with Enterprise Manager v9.2
While using Enterprise Manager console (with Windows XP), I have experienced abrupt termination by the Client/Console when I try to view tables within the Schema section (by clicking on a table name)...it just closes on screen before my eyes. This do
-
Hi, i've making a web application and im using xml for some operations.... i have the following problem when try to validate a xml SAXParser parser = new SAXParser(); parser.setFeature("http://xml.org/sax/features/validation", true); parser.setFeatu
-
Will HANA supports in build planning function
the documents says SAP HANA Database u2013 Development Guide u2013 How to use SQL and SQLScript for Data Modeling SAP HANA Appliance Software Page 17 of 83 "The SAP HANA database also contains a component called the planning engine that allows financ
-
DI: Completing a work order
Hi, I've got a problem after upgrading from SDK 6.2 to SDK 6.5 with setting the status of a work order (WorkOrders-Object): Function SetWorkOrderComplete(ByVal woCode as Long, ByRef ErrMsg as String) Dim WO As SAPbobsCOM.WorkOrders, rc as Long, suc