Table values are not visible

Hi,
I have designed the GUI, which contains JTable.
Every time the table is loaded with some values dynamically, after doing some operation.
The table values are first stored in the vector and set to DefaultTableModel.
The DefaultTableModel contains two vectors, in which first vector will have row values and
second vector has column name (or heading, always it is four).
The problem is only 40 row's values are visible in GUI.
Not able to move the scroller down to see the table values after the 40th row.
Please suggest me in what way i can correct this problem.
Thanks & Regards

calvino_ind wrote:
kathyayini wrote:
Its not stupid.
I know that there are more than 40 rows.
Because i have displayed the values which are loaded into table and also i am writing the table as excel file.
Don't act to smart.he wasn't acting smart, but actually acting dumbYeah as if your first comment asking whether he added a JScrollPane was much smarter, especially because the OP mentioned that he has a scroller in the GUI...
Be it as it is, you could post the relevant code snippet here.

Similar Messages

Oracle Table Values are not displayed when tried to display with Essbase

Hi,
I was trying to create a report with Oracle RDB Table and Essbase by following the steps given in "Federating Essbase and Relational Data Sources in Oracle Business Intelligence Suite Enterprise Edition Plus" document at the location http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/fed_data/fed_data.html.
I am able to see the members from the Essbase cubes and I can also see the Oracle Table values, if they are displayed individually (i.e. different reports) but when I try to get one report with Essbase values with Oracle table records then Oracle table records are not displayed and when see the query log I don't see the query for Oracle table but I see obviously MDX queries for the essbase.
Please help.
Regards,
Paresh

Hi,
Smitha, you can defnetly use dynamic table in interactive form. I had similar problem and I acheived like follwing:Basically you have to bind the table .
If you want to have fixed number of rows in the interactive form, then in wddoinit method bind the internal table to ur table node. for exmaple: if u want 2 rows in the form loop times . So by default when you open the form you will get two rows for the table.
**************BIND THE ITAB ****************************
DO 2 TIMES.
APPEND LW_LFBK TO LT_LFBK.
CLEAR LW_LFBK.
ENDDO.
CALL METHOD lo_nd_t_lfbk->bind_table
EXPORTING
new_items = LT_LFBK.
If you want to have dynmic table then take a submit button in the form instead of normal button,
in onaction submit write a loop every time you click that new submit button it should add a new row.
use above coding in onactionsubmit instead of doinit.
Thats it.
Regards,
Ravi

Table values are not passed to context.

Hi,
Im trying to build a online(WD ABAP) form with a BAPI which is having import, export and tables parameters.
I have binded Datasource with main node and Template source I have binded with the form which I created with the form interface using context fromBAPI. Then I got all importing and exporting parameters. And tables I have got under Changing Node of Data View in the form. But there is one other node called Data is created automatically under changing node and under that DATA node I got Table and under that I got again Data Node created and there I have all the attributes.
I dragged table on to the form. But when Im tesing the form by submitting, Im not getting table values which are entered in table. But all other values which are binded to importing parameters Im able to get the values.
Can some one tell me how to get the values from table to context? And can I have dynamic table in the form to map to the context so that I can update the data through BAPI?
Warm Regards,
J.Smitha.

Hi,
Smitha, you can defnetly use dynamic table in interactive form. I had similar problem and I acheived like follwing:Basically you have to bind the table .
If you want to have fixed number of rows in the interactive form, then in wddoinit method bind the internal table to ur table node. for exmaple: if u want 2 rows in the form loop times . So by default when you open the form you will get two rows for the table.
**************BIND THE ITAB ****************************
DO 2 TIMES.
APPEND LW_LFBK TO LT_LFBK.
CLEAR LW_LFBK.
ENDDO.
CALL METHOD lo_nd_t_lfbk->bind_table
EXPORTING
new_items = LT_LFBK.
If you want to have dynmic table then take a submit button in the form instead of normal button,
in onaction submit write a loop every time you click that new submit button it should add a new row.
use above coding in onactionsubmit instead of doinit.
Thats it.
Regards,
Ravi

Dropdown field in table - Values are not shown..

Hi,
My Query is i am not able to push values into dropdown table field.
My data comes from config part (through OADP Provider). When i click on MSS-> Performance Management link in portal a new screen gets triggerred which displays the required table fields.
I have to display one table field as dropdown. i am able to display all the values correctly. I need to display one column as drop down. i am able to show that table column as dropdown but i am not able to push values into the table field.
The reference Webdynpro Comp/ int is OADP_TEST
Plz find below the code i have written and help me in this regard..
The code written in WDDOBEFORENAVIGATION
    lr_oadp->set_app_col_cell_editor_type(
    column_name = 'ZPM_PERMRAT'
    cell_editor_type = cl_oadp_cell_editor_type=>DROPDOWNLISTBOX ).
    lr_oadp->set_app_col_data_type( column_name = 'ZPM_PERMRAT' data_type = 'STRING' has_unit = abap_false has_currency = abap_false ).
      clear lt_dropdown_values.
      create object lr_dropdown_value.
      lr_dropdown_value->set_key_value( '1' ). "#EC NOTEXT
      lr_dropdown_value->set_text( 'E' ). "#EC NOTEXT
      append lr_dropdown_value to lt_dropdown_values.
      create object lr_dropdown_value.
      lr_dropdown_value->set_key_value( '2' ). "#EC NOTEXT
      lr_dropdown_value->set_text( 'S' ). "#EC NOTEXT
      append lr_dropdown_value to lt_dropdown_values.
      CALL METHOD LR_OADP->SET_APP_COL_DROPDOWN_PARAMS
        EXPORTING
          CELL_CHANGE_EVENT_ON = abap_true
          COLUMN_NAME          = 'ZPM_PERMRAT'
          DROPDOWN_VALUES      = lt_dropdown_values.
Kindly help in this regard...

After updating data into table add patialTrigger to table component.
You can do this by doing this. In table Behavior property section contains property call Partial Triggers in here you
can set from which component partial triggers this component you can select your command button.

Updated (VORowImpl ) values are not reflected in inline POPUP table

Hi Expert,
Currently i am getting exception when i try to update my iterator binding,
Here is my use case,
I have view object displayed inside the inline popup as a table. When i modify one of the cell i am firing the value change listener and it is called the ViewObjectRowImpl class method. Inside the method i do some computation (i am executing some DB query to get back some value). After the query execution i am updating the other columns data based on the changes.
First i have PPR the table and check out the update values. Unfortunately the change values are not reflected.
Then i used the following code
DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
if (itrBinding != null) {
itrBinding.executeQuery();
itrBinding.refresh(DCIteratorBinding.RANGESIZE_UNLIMITED);
Now i am getting the " JBO-25003: Object EmployeeMgmtAM of type ApplicationModule is not found."
May i know what went wrong? Am i missing anything. May i know how can i refresh the UI table based on the updated VORowImpl. Looking forward hints.
Thanks

Thanks Frank, Actually i am accessing the client method as follows,
DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
if (itrBinding != null) {
EmployeeVORowImpl employeeVO = (EmployeeVORowImpl)itrBinding.getCurrentRow();
empoyeeVO.methodName();
May i know what is the different between accessing the method as shown above and access via the MethodBinding?
How about access the attribute of the View object using the above approach? i.e empoyeeVO.getName() like ....
Also i have configure the ADF looger to finest level and found the primary reason to "Applicaiton module not found" was some entity validation. But this not always happened. Same test case works fine and fails sometimes. I am clueless. Could you please throw some light.
Thanks
Edited by: user1022639 on Feb 7, 2012 5:24 PM

Created a trigger but new values are not inserting in the backup table

I have created a backup table and writter a trigger on a table such that after update old values and new values are to be inserted into the backup table, but new values are not inserting. I am giving the code please help me
create or replace trigger "SUPPQUOTES_AUDIT"
after update or delete on phsuppquotes for each row
begin
insert into phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values
(:new.cprc,:old.suppcode,:old.itemcode,:old.cprc,:old.negodt,:old.validdt,:old.userid,SYSDATE);
end;

old values and new
values are to be inserted into the backup table, butwell you have only one insert there, inserting old values with a new id (which is ok if you don't update the id column, but I don't think that :new is available for deleting ops); you should have two inserts:
insert into
phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values (:old.cprc,:old.suppcode,:old.itemcode,:old.cprc,:old.negodt,:old.validdt,:old.userid,SYSDATE);
if (updating) then
insert into phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values (:new.cprc,:new.suppcode,:new.itemcode,:new.cprc,:new.negodt,:new.validdt,:new.userid,SYSDATE);
end if;
gojko adzic
http://gojko.net

Table control values are not able to read with out a user action.

Hi All,
I am working with a module pool programing and I am calling 3 sub screens into my main normal screen.
In one of the sub screen, I have created a table control and getting the initial values from database and displaying.
Now I try to change the couple of fields in my table control and with out user action (not pressing Enter after changing the values in table control).
I try to save the edited/changed values in table control into the database. But I am not able to do so, since the change values are not able to pick.
My requirement is end user will not do any action(press the enter key ) and he directly presses the save button which is defined in the main normal screen.
Kindly suggest some solution.
Thanks
Geetha

Hi Geetha,
in SAP Default While pressing save button the modified value will pick up because
Save button will perform enter function also.
Regards,
Thangam.P

Follow-on documents are not visible in MIRO in TEST server, awsys = PRD300.

Dear Experts ,
The Test Server was refreshed around mid-June 2011 with data of
Production Server. The follow-on documents are not visible for the
invoice documents in MIRO in TEST server due to value in tables
BKPF,RBKP : field : AWSYS = PRD300 .
The newly created Purchase Orders after the refresh, the accounting
documents can be seen for the Goods Receipt (MIGO_GR-display) and
Invoice documents (MIRO).
we had already raised this issue in March & got the feedback from SAP
as shown below.
accordingly we have developed & run the program "zzlogsys2" which
updates the Logsys/Awsys field from PRD300 ( of production server ) to
that of the current server i.e. TST300 as required.
after which the FI documents for the material documents are visible in
MIGO,but follow-on documents are not visible for the invoice documents
in MIRO.
we have Checked notes 781498 and 28958 to see if the logical system is
correctly assigned , where we found that in table RBKP after entering document number, Fiscal Year , the
Field AWSYS is "PRD300" & not "TST300" as it should be. We will take up the activity of updating table RBKP
also as we are currently doing for tables MKPF & BKPF.
But to have clear picture as to what we are doing is correct , pl
advise about the following :
1) Is it a correct process done by our SAP-Basis team , that every time
any Server ( e.g. Test or Quality ) is refreshed with Production server
data, the Field AWSYS in various transaction tables gets value as
"PRD300" which then is required to replaced by running program such as
ZZlogsys.
REPORT ZZLOGSYS.
TABLES: T000, MKPF.
DATA: NEW_SYS LIKE MKPF-AWSYS.
PARAMETER: OLD_SYS LIKE MKPF-AWSYS.
SELECT SINGLE * FROM T000 WHERE MANDT EQ SY-MANDT.
NEW_SYS = T000-LOGSYS.
CHECK NOT NEW_SYS IS INITIAL.
UPDATE MKPF SET AWSYS = NEW_SYS
WHERE AWSYS = OLD_SYS.
WRITE:/ 'Number of updates: ', SY-DBCNT.
2) if the above process is correct & normal , then which are the other
tables in a particular server ,apart from tables MKPF,BKPF,RBKP , which
needs to be updated the value of field "AWSYS" in the same way
replacing value "PRD300".
3) if the process in point no. 1 is not correct , then what is the
correct process that the Basis team can do while refreshing any target
server with production data so that target server retains its value in
Field AWSYS & not showing "PRD300".
With 3 servers TEST,DEV & Quality , recently refreshed with production
server to bring all servers in Sync for a HR patch application, we have
this situation now in all 3 servers .
Thanks in advance ,
Anil Shanbhag

It is appropriate to move this thread from ERP-MM to [Enterprise Resource Planning (ERP)|Enterprise Resource Planning (SAP ERP);
Edited by: Jeyakanthan A on Jul 7, 2011 4:56 PM

Value attribute not visible in runtime collection

Hi,
I have created some 2-3 value attributes (display only) in a standard model node for BTDOCFLOW (which also contains some display only fields). Put in the logic in their Getter methods and fields are getting displayed in UI with the values.
Now, my requirement is to display this table view (Assignment block) in default sorting based upon one value attribute and one model node attribute. But the problem here is, I am unable to find value node attribute at runtime in BTDOCFLOW collection at DO_PREPARE_OUTPUT. (Even display only standard context node attributes, which are not part of model node structure are not visible)
I have re-defined method GET_TABLE_LINE_SAMPLE with the value attributes, resulting in enhanced rv_sample line, but still the value attribute is not visible at runtime in the collection.
Can someone pl. tell me, how can I display my value attributes in collection along with model node attributes, so that I can do default sorting based upon one custom and one model node attribute.
Thanks,

Hi,
Whne you define value attributes within the model attribute then the node becomes mixed instead of either value node or model node.
So you need to access the mixed node and then should access model attributes and value attributes separately.
Get your collection into a normal entity then assign the entity to mixed node
DATA: lr_mixed TYPE REF TO cl_bsp_wd_mixed_node ,
            current TYPE REF TO if_bol_bo_property_access,
             lr_current TYPE REF TO cl_crm_bol_entity.
     current ?= me->typed_context->entity name->collection_wrapper->get_current( ).
      lr_mixed ?= current..
      lr_current ?= lr_mixed->if_bsp_wd_ext_property_access~get_model_node( ).
Best Regards,
Dharmakasi.

AET Generated field values are not saved.

Hi Gurus,
I have created two AET fields on the screen (marked below) and that should store values in table CRMD_CUSTOMER_H. When I create a new service request and enter the values and save, AET field values are not saved. Again, when I edit the same service request and enter the values and save , AET field values are saved on the database.
While debugging I found that, relationship BTHeaderCustExt does not exist for the first time and second time onward its appearing. Due to this, data is not being saved at first time (Line no 27 : current is empty).
When tried to create realtionship using create_related_entity , it throwing exception cx_crm_genil_model_error.
Please advice me the soution for the same.
Regards,
Anand

there should be a context node at your view level. Please check ON NEW FOCUS method is implemented or not.
If not, you can implement that method with below code.
    DATA: lv_collection TYPE REF TO if_bol_bo_col,
          entity        TYPE REF TO cl_crm_bol_entity.
*   get collection of dependent nodes
    entity ?= focus_bo.
    TRY.
        lv_collection = entity->get_related_entities(
               iv_relation_name = 'BTHeaderCustExt' ).
        IF lv_collection IS NOT BOUND or lv_collection->size( ) = 0.
          IF entity->is_changeable( ) = ABAP_TRUE.
            TRY.
                entity = entity->create_related_entity(
                 iv_relation_name = 'BTHeaderCustExt' ).
              CATCH cx_crm_genil_model_error cx_crm_genil_duplicate_rel.
*               should never happen
            ENDTRY.
            IF entity IS BOUND.
              CREATE OBJECT lv_collection TYPE cl_crm_bol_bo_col.
              lv_collection->add( entity ).
            ENDIF.
          ENDIF.
        ENDIF.
      CATCH cx_crm_genil_model_error.
*       should never happen
        EXIT.
      CATCH cx_sy_ref_is_initial.
    ENDTRY.
    me->set_collection( lv_collection ).

Parameter values are not showing in in the Organization Parameter form

We have done a setup for an Inventory Organization.
Everything was working fine.
Values were showing everywhere.
We have lot of transactions done in the org also.
But suddenly yesterday when I was trying to open the Organization Parameter form for that specific organization, the form came up as blank and in the bottom the error is Query caused no records.
I have checked data is there in the base table mtl_parameters.
Value is coming for other organizations. Only one specific organization is having this issue.
Even in Examine, I have taken the last query run on that form and ran the same in back end database, I can see all values are there in the database.
But in frontend screen the values are not showing. even organization code also not showing.
Navigation is: Inv Super user --> Setup --> Organization --> Parameter

Have you checked Organization Access to ensure that no one restricted that org?
Or shipping grants and roles?
I think there are quite a few places that you can restrict access.

Excise values are not updating in factory sales

Dear SCN's,
I'm facing an issue while doing factory sales, while creating sales order and billing I'm using J1IIN for excise invoice and then updating in J1I5 transaction but the values are not updating in table J_2IRG1BAL. Can anyone suggest what to do in order to get the values updated in table.
Thanks & Regards,
Kumar

The following note explains how you need to update J_2IRG1BAL table.
Note 951955 - CIN: General clarifications for RG1 goods
Have a look at this.
G. Lakshmipathi

Grand total values are not matching with Detail report

Report has grand totals and when I drill to the detail report, grand total values are NOT matching with parent report totals, I did some analysis but I'm clueless on this issue.
Please provide your thoughts and insight on this issue..
Thanks

is your summary and detail reports hitting different facts, like summary hitting aggregate and detail report hitting it's corresponding detail level fact..?
if then,
From Front-end:
Fix the filter values in detail report that are passing from master report then try delete each columns then check the grand total. If you found your values is matching by deleting particular column then you need to investigate what is the issue around with that dimension table..
From Database side:
1. check first aggregate table has proper aggregate data of it's detail..
2. Take the detail report obiee generated query and try to comment each dimension table and it's corresponding joins to the facts, (before, this delete all the dimensional columns and other measures from select statement and put only that measure where you are getting wrong value, so that you need not to comment all the select and group by columns which saves your time.. ). Need to check by commenting each dimensional wid and it's table from clause, if you found that values is matching then there is some problem with wid columns data population in your ETL.
Is that BI-Apps project?
btw, whtz ur name?

Excise values are not copied to Commercial invoice in trading process

Hi All,
I have an issue while creating VF01 the Excise condtion values (BED, AED) not copied to commercial Invoice.
Other inputs about the scenaio:
The process is 1Customer schduleing agreement->outbound delivery->J1IJ->commerical invoice(VF01)
We had vendor agreement in which 3 line items were crated with qty of 500, 1000 and 1500 qty
for the first line item when we created total cycle upto VF01 the Excise values are copied where as for the 2nd and 3rd line items the excise values are not being copied to VF01. Here note the only difference beween these 3 line items is mateial code is different.
J_1irg23d table is showing the BED and AED condtion values for the 2nd 3rd line item aswell.
Checked PO also for the 2nd and 3rd line item showing the Excise tab in which Excise values are showing.
MIGO and MIRO were created with correct PO only
We maintan the condtion reocrds for BED and AED as 100%, what ever the Excise values maintained in MIRO the same will be copied to VF01.
Once again just would like to reconfrim the issue is out of 3 line items of the sheduling agreement for the first line item BED and AED are copying to VF01 where as for the 2nd and 3rd line item BED and AED values not copying to VF01.the only difference is material code between the line items.
Please let me know if you need any further details.
Thanks in advance.

Thanks sir for your reply.
have you declared the receiving plant from overseas as a Depot?
Yes it was defined as depo plant in configuration of plant settings.
Actually i should have mentioend total cycle before. However, i have mentioend in my OP as
MIGO and MIRO were created with correct PO only
But anyway please check my total cycle as below.
ME31L (vendor agreement)
MIRO(customer custom vendor payment)
MIGO(with ref Vendor agreement/PO) here the excise duties are captured as well, we will not do seperately JIIG.
MIRO( actual vendor payment)
VA31(customer agreement )
VL01N(outbound delivery)
J1IJ(with ref delivery) here we sellect the MIRO invoice
Vf01( commerecial invoice)
Upto J1IJ all the values calculated and copied ok. Only during VF01 the BED and AED values anot being copied. Even i tried the update button but not updated.
For time being we are entering the BED and AED condition values into VF01.
thanks,
Message was edited by: surya prakash

Goods are not visible on the Web Shop main page (RUMP UP)

Hi colleagues.
Help please anybody :)
There was the problem with the goods in Web Shop.
Goods are not visible on the page Web Shop.
Below you can see actions performed by us and Prerequisites:
1. Repository was unachieved from Standard archive - WEC20_MDMCATALOG_CONS
2. Taxonomy, Hierarchy and Lookup table data were transferred from CRM via MDMGX
3. Manually created root node in Product Catalogs table in MDM
4. Put technical code (ID) of created node to Product Catalog module in WCEM configuration - field Catalog ID.
5. Fill another necessary fields in Product Catalog module in WCEM.
6. Manually add test record in MDM and linked to node in Product Catalog table, elements from Main Taxonomy and other required fields.
7. In preview mode of WCEM configuration not possible see any records from MDM (but product catalog elements showed correctly)
More information about settings in MDM, CRM,WCB and configuration steps can see in attachment files
Best regardn,
Andrey

Hi Denis
Leading zeroes it's no my case, because the products (materials) replicated from CRM to MDM.
Replication from CRM to MDM via MDMGX and Initial Load R3AC1 is successfull.
But on the WebChannel web shop page this products are not visible.
I have suggested that the problem in authirizations of technical user, which uses RFC Destinations from SAP NW AS Java (Web Channel) to MDM.
According Security Guide for SAP Web Channel 2.0 (paragr. 8.3.2 see please screenshot), user of WEC_MDM_DEFAULT destination must assign the role WEBCHANNEL_CATALOG_DISPLAY_ROLE.
But this role does not exist in the system (SAP MDM, SAP NW).
Please give me advice about this.

Table values are not visible

Similar Messages

Maybe you are looking for