Table view thru SE16 of Table S039

hi.,
I am trying ot view a Table Name S039 thru SE16.
Though i give a few of the parameters such as Material , plant , Storage location, material type. the system gives me a message saying there is " no table entries for specified key"
Can u throw some light on this.
I have checked thru MMBE , there is stock in the plant for that specified material.
Tx
Mahesh

Hello Mahesh,
Go to SE38 give the program name RMCBS039 and execute (F8) the transaction.
On the next screen, give your criteria i.e. plant, Sloc and execute.
Hope this helps.
Regards
Arif Mansuri

Similar Messages

Set Foocus on a particular celll in a table view

Hi ,
I have a table view , When i select a row in the table view , focus must be set on the first column, the first column is a editable column .
I have used <phtmlb:focusRect>
the attribute for the focusElementId is the cell id of the particular cell where focus is to be set..
but the focus is not set ...
when I give the id of the table view .. it gets focus on the table view ..
for eg., table view id = 'itmlst' when i pass this as attriute it gets focus on the table view ..
when i try to get focus on a particular cell .. id 'itmlst_1_1' .. it doesnt get focus on that cell ..
Please give me ur suggestions for setting the focus on a particular cell when selecting a row

to set focus you can do it thru javascript.
<SCRIPT LANGUAGE="JScript">
function textFocus(elementid)
var element = document.getElementsByName(elementid);
element.select();
</SCRIPT>
sorround this javascript by a abap if else condition and pass the elementid with a abap variable.
Regards
Raja

Drag & drop from sorted table view to outline view in AppleScript Studio

I want to make a drag and drop from a sorted table view to an outline view in applescript Studio.
Problem is that the data are copied from the data source of the table view,
wich is unsorted, rather than from the table view itself that is sorted.
So I have the wrong data droped.
The element wich is passed from the table view thru the outline view is the row number. Then the script find the data of the corresponding row of the data source of the table view(unsorted).
I want the script, using the row number, to get the content of the displayed row of the table view (sorted).
Any help welcome.

I want to make a drag and drop from a sorted table view to an outline view in applescript Studio.
Problem is that the data are copied from the data source of the table view,
wich is unsorted, rather than from the table view itself that is sorted.
So I have the wrong data droped.
The element wich is passed from the table view thru the outline view is the row number. Then the script find the data of the corresponding row of the data source of the table view(unsorted).
I want the script, using the row number, to get the content of the displayed row of the table view (sorted).
Any help welcome.

Table view in EHP1 CRM 7.0

How to create a table view in ehp1 CRM.
Is it the same way by creating a view and adding value node /model node then selecting view as table view with congigurable mode?

Hi Anita,
As per your requirement, AET table enhancement will be best suited to it.
Use the help.sap.com link i gave in earlier reply to know more about AET table enhancements.
Now to get on to this task ,
1) Use transaction AXTSYS and create an entry for Z component, give a name say ZAET_TBLEXT.
and Save. The AET Table extension, then will use this component by default( if you select the radio button there) to create the views. Remember, just give any name you desire for the component. You dont need to create this componenet. AET extension wizard will create the component automatically.
2) Open the overview page on which you would like to have the tableview as an assignment block. Since its a compititor info, i assume you want to place it on a BP/Account/Prospect. Competitor Overview Page or Opportunity Overview Page. Now chose the config button and once the Assignment blocks are highlighted, select the Header View( Compititor header or Opportunity header view depending on the overview page you are in) and config tool will open. Use the Display Enhancement button or create enhancement button and another popup will open which display the enhancements if any,
3) On this Pop up you will see the AET table extensions assignment block. Use the Add table button. Follow the wizard and create the table, mention fields, translations etc. Also mention it as 1:n relation and so the table view. Chose the Standard buttons so you get all action buttons as well as inser, editlist, delete buttons etc.
Once done, save and generate. This creates the view and also adds the component usage on overviewpage.
Now all you need to do is just configure the overviewpag to pull the new tableview assignment block from Available to Displayed blocks.
Note :
1) this creates a Ztable , name same as mentioned/defaulted while AET table enahncement
2) this create Z BOL entity with 1:n relation with Access Entity of OverviewPage , for example, BuilHeader if account overview page or BTAdminH if Opportunity overview page.
3) creates BOL strucutre, handler class etc on its own.
4) You do not need to do any coding,
Thus in half an hour, you are done with Table view enhancement with Z table based entities.
Before EhP1, we had to extend the BT/BP model with ZBOL and had to do a lot of thigs on our own. Almost 2 days job for an advance developer which is reduced to 15-20 minutes with zero coding required.
If you have a sandbox or IDES system, i would recommand you to try it there frst, get confident and then do development on your development system.
Remember ->
1) AET Enhancement tool has to be started from WEB UI - which is generally runs on Customizing client, but creating AET table and enhancements is Workbench task. So if your customizing client is locked for workbench developments, then You must run the WEBUI on your workbench client ( use transaction wui ). It does not make any difference as far as development is concerned because your development its pure Workbench activity. later, you configure the Overview Page to pull the AET table view on your customizing client.
2) Be confident and have well determined about the table design & about your table view design like the fields you need etc. because once you add the fields and mention the field type like Numeric, indicator,text etc, you can not change it later once the Tableview is generated. You can add more fields later and you can delete fields too but you can not change their type later.
All the best.
Thanks & Regards
Suchiita
Edited by: Suchita Phulkar on Jul 30, 2011 12:16 AM

Deleting one row from a table view

hi i have one tableview model. At the footer of this tableview there are 2 buttons add and delete. I want that when I press the delete button one row must be deleted. I have written one ondel event.I have to implement the logic inside that.Can anyone help me with the logic?

Hey Sumana,
Check the row of the table view u want to delete.Iterate through all the rows from the top of the Table View and copy it into another new array.While doing so, check whether the row is selected or not.If it is not selected,
then copy the content into the new array and if it selected,skip that particular row and start copying from the next row.proceed till the end of the TableView.At the end initialize this new array to the model of the Table View.u have a Table View with the specified row deleted now.
Anil

Multi layer table view/navigation controller hierarchy best practice

Hi,
I am new to iPad/iPhone development and wondering what the best practice for multiple layers of table views is? I understand the principle of a navigation controller providing the framework for moving up and down a list but have not yet quite got my head around if you should have one navigation controller for the whole tree or several navigation controllers.
In my app I need to have the following:
Main view -> window view showing some interactive elements (picker, buttons etc.)
Setup view -> Hierarchy managed by nav controller/table views
The setup view needs to manage the following hierarchy...
- Level A:
- Global app variables (one table view)
- Level B Items (table view showing list of items at belonging to Level B)
- Level B Item 1 (table view showing list of items at level C belonging to level B item 1)
- Level C Item 1 (table view showing list of items at level D belonging to level C item 1)
- Level D Item 1 (table view showing list of items at level E belonging to level D item 1)
- Level E item (table view for properties of item at Level E)
- Level D Item n
- Level C Item n
- Level B Item n
Each level in this has some properties and then a list of child items.
What would be the best way of structuring this? I would assume that creating a class that extends a view controller for each level is a given but what about the control of the navigation? Should this be handled by one navigation controller or one per level? I think I know the right answer but have not seen a neat way of implementing
I think I am also best off having each level in it's own xib but, once again, am not 100% sure that this is the best design pattern.
Many thanks in advance for any help/pointers!
Cheers
jez

Hi Julian,
I have struggled with the same questions you are addressing. On a previous project we tried to model based on packages, but during the course of the project we encountered some problems that grew overtime. The main problems were:
1. It is hard to enforce rules on package assignments
2. With multiple developers on the project and limited time we didn't have time to review package assignment
3. Devopelers would click away warnings that an object was already part of another project and just continue
4. After go-live the maintenance partner didn't care.
So, my experience is is that it is a nice feature, but only from a high level design point of view. In real life it will get messy and above all, it doesn't add much value to the development. On my neew assignment we are just working with packages based on functional area and that works just fine.
Roy

Problem in pivot table view

Hello gurus,
I need a help in pivot table view. In pivot table, I have to show measure in accordance to month. For example show sales as per region by month name.
Region               Sales
          Jan     Feb     Mar     Apr …………..Dec     Avg     Total
A          10     40     92     92          32     xxx     xxx
B          73     83     39     78          87     xxx     xxx
So this is what I have to do. I am able to do this with one measure with created new calculated item. Now I have to create this report using two measures and the in the new measure I have to show only average and total.
For example
Region               Sales                              Target
          Jan     Feb     ………Dec     Avg     Total Avg Total
A          10     40          32     xxx     xxx          xxx          xxx
B          73     83          87     xxx     xxx          xxx          xxx
Here sales and target are two different measures. The problem is when I add target column in measures; it will show all the month which I don’t require at all because I need all the month for sales only and for target I just need average and total. I try from head to toe but not getting any thing like this.Can i do this using other view if possible.
Help me guys. If you need more explanation then please let me know.
Thanks
Regards,
Suhel

Anybody replies please.....
Is this possible that we can use Calculated column in other calculation in pivot table. For example, total of one measure divided by total of another measure in pivot table.
Regards,
Suhail

Using interface builder to create a table view and add a cell

So I am using interface builder to make a table view. Should be easy. I drag a table view controller to my view, then it seems I should be able to drag a table view cell to the table view but it won't let me drop it down. If I do it in the documents window it just replaces the table view with a cell. Seems like this shouldn't be hard, but it's one of those things that should take 2 seconds but I have been messing with it for hours. It seems like most of the examples I have looked at in the same code don't use iB so I haven't found a good reference. If somebody can point me in the write direction let me know.

I struggled a bit too. Here's what I did on my recently completed app. I used IB to create the basic view and add the table. That's it. Then ensure your UIViewController based class implements the UITableViewDelegate and UITableViewDataSource protocols. Your cells will come from those methods, not anything you do in IB.
If you're creating a set of screens that just have tables that allow you to navigate up and down through the data then IB isn't worth using at all.
Just have your views extends UITableViewController and follow some of the supplied table based example apps.
I rewrote my first app 3 times as I slowly figured all of this out.
Hope that helps.

Problem with maintain table views SM30 Transaction

Hello All,
i have a problem with the table maintenance view SM30, it doesn't permit me to modify the rows in the table.
we have added a field into the table and when i tried to change the table view from menu: Utilities ==> table maintenance generator==> change the system propose me a message that the screen 0001 will be deleted and recreated...but the system has deleted the screen and doesn't recreate it...in somewehere on internet we find that we should use the transaction SE55 menu:
Environment==> modification ==> Maintenance screen ==> button Layout which open the tool Screen Painter and from that we have created our screen with 4 fields of our table...our result that the screen is created and i can see it from the SM30 transaction but i can't insert rows in the table...when i try to go to maintain table: menu: Utilities ==> Table maintenance generator to try if i can modify something the system give me a message: "set the compare flag dialog ZIV_DP_PLCHAR_LA"
the ZIV_DP_PLCHAR_LA is the name of my table...
can you give me some advices please how should i do to fix this problem to insert rows in table throughout the transaction
SM30 "maintain table views: initial screen"
if i want to delete the screen from the SE55 transaction to recreate it newly what should i do to take care about some options
to have a new screen?
thanks for all
Bilal

Hi
First delete the old table maintainence generator.
Now Recreate the screen and your table is good to go..
These error messages come when we add new fields and different version of the table maintainence generator in database.

Migration from Designer: wrong alias for used table/view in views

Hello,
I am using SQL DM version 3.3.0.744.
when importing a view from Designer, a query is build with aliases for the used tables/views which are the same as the table/view name. When using a where clause in Designer, you refer to the alias of the table/view, like t1.col1= t2.cola. Here t1 and t2 are the aliases of the underlying tables.
In Designer the following DDL is generated:
CREATE OR REPLACE FORCE VIEW VIEW5
(COL2
,COL1)
AS SELECT T2.COLA COL2
,T1.COL1 COL1
FROM TAB2 T2
,TAB1 T1
WHERE t1.col1= t2.cola
After importing the view in Data Modeler, the following DDL is generated:
CREATE OR REPLACE VIEW VIEW5 ( COL2,
COL1 )
AS SELECT
TAB2.COLA COL2,
TAB1.COL1 COL1
FROM
TAB2 TAB2,
TAB1 TAB1
WHERE
t1.col1= t2.cola ;
So by using the wrong alias, the where clause is invalid and the query builder doesn't show the joins.
The solution for this is to use the alias of the used table/view instead of the table/view name. Can you raise a bug for this?
Thanks in advance,
Joop

Thanks for your time. I did all possible way, but still the same problem. I mean
EXP 8... IMP 8
EXP 8... IMP 9
EXP 9... IMP 9
Today I found that, NLS_LANG of two databases are different. Oracle 8i is : WE8ISO8859P1
AND Oracle9i is : WE8MSWIN1252
So I created a new database from scratch with Oracle 8i character set :WE8ISO8859P1 and then use imp9i to import the file. Still the same problem.
Thanks,
Arash

MVC Event Handling with different rows of table view

When i select a value called ' Herrforth' in the drop down list box of first column first row of the table view, in the form_fields table of do_handle_data i get the following
name value
1 htmlbscrol<0 |
2 htmlbscrol<0 |
3 htmlbdoc_i<ComponentTest |
4 sap-htmlb-< |
5 tray1-es |1 |
6 tv1_1_1 |Herrforth |
7 tv1_pager_<1 |
8 tv1_rowcou<10 |
9 tv1_allcol<VORNA/PERSNO/KOSTL/ABTKZ/WERKS/ |
10 tv1-ts |LINEEDIT |
11 tv1_visibl<1 |
12 tv1-chk |1 |
13 tv1-prevch<1 |
14 tv1__selec<tv1_selrow_1 | 15 tabstrip1_<2 |
16 tabstrip1_<1 |
17 tabstrip1_<1 |
where 'tv1' is the id of table view. In the do_handle_data now i have written as Nachn = request->get_form_field( 'tv1_1_1' ). " so that the selected value in dropdown is stored in the variable nachn but note that this is when i select the first row first column dropdown listbox. when i select a value in the dropdown list box of 2nd row event name is tv1_2_1. so how will i retrive this value of listbox in 2nd row.similarly when selecting values in drop down listboxes of other rows. In do_handle_event i have written
WHEN 'tv1_1_1'.
CLEAR it_table1.
model->selectempdetails( ).
it_table2 = model->it_table2.
LOOP AT it_table2 ASSIGNING <lf_table2> WHERE nachn = nachn ." nachn value i am getting in do_handle_data using Nachn = request->get_form_field( 'tv1_1_1' ).
wa_table2-persno = <lf_table2>-persno.
wa_table2-nachn = <lf_table2>-nachn.
APPEND wa_table2 TO it_table1.
ENDLOOP.
DO 10 TIMES .
wa_table2-persno = ' '.
wa_table2-nachn = ' '.
APPEND wa_table2 TO it_table1 . " it_table1 is the table attribute of table view 'tv1'.
ENDDO .
ENDCASE.
Thanks & Regards,
Renju.

Hi Ravikiran,
I am having a tableview in which the first column is an input field.
I am getting the the value entered in the input field of table view in do_handle_event but note that i am trying to get the value using key board event ('ENTER'.
How can i get the id of which input field of Tableview i have enterd the value so that i could write in do_handle_event.
eg:if tableview id is 'tv' and the first column of tableview is an inputfield.
If i am enering value in first row first column of tableview its id is tv_1_1.So that i could write in do_handle_event as
case.
when 'tv_1_1'.
endcase.
If i am enering value in second row first column of tableview its id is tv_2_1.So that i could write in do_handle_event as
case.
when 'tv_2_1'.
endcase.
but instead of writing this seperately how could i get the id of inputfield dynamically.Note here the event here is keyboard event 'ENTER'.
Thanks & Regards,
Renju.

[iPhone] Grouped Table View using SQLITE?

I am filling my table views from a SQLITE table. I am trying to get it to display in grouped mode, but I am unsure on how to handle this using SQLITE. I can get the grouped mode to work, but I can't get it to show any headers, it is just one large block with all the returned results.
Anyone been able to get this to work or might have some advice?
Thanks.

Beers is correct. This is easy to accomplish though, if you have your recordset fed into an array on SELECT.
I'll start you off because i'm such a stand-up guy
- (NSInteger)numberOfSectionsInTableView:(UITableView *)tv {
return 123456789;
- (NSString *)tableView:(UITableView *)tableView titleForHeaderInSection:(NSInteger)section {
// switch( section ), or if statements to send different titles
return @"My Title Is The Greatest";
- (NSInteger)tableView:(UITableView *)tv numberOfRowsInSection:(NSInteger)section {
// Again, if more than one section do a switch( section ): or bunch of if statements
return [myDataArray count];

Business user needs to view tables with out SE16 access

Hi ,
There is a requirement where business user ( Data team)    need to view some master and transactional data tables in production . But , as per our process , end users will not be given SE16 access .
Is there any solution where we can allow the end user to view tables with out SE16 access ?
Thanks in advance .
Thanks .
Dharma.

Hi,
Using Function Module C160_TRANSACTION_CALL you can call any tcode which dont have access..
Create a report and call function module and pass se16 to parameter .
CALL FUNCTION 'C160_TRANSACTION_CALL' "
EXPORTING
    i_tcode =        'SE16'            " sy-tcode
EXCEPTIONS
    ILLEGAL_INPUT = 1           "
    INTERNAL_ERROR = 2          "
    . " C160_TRANSACTION_CALL
now create a tcode for this report as ZSE16.,
hope this helps u.,
You can also create Data browser ( SE16 ) in report and display as ALV., using Field Symbols and RTTS.
Thanks & Regards,
Kiran

Display of missing values in a table view.

Hi everyone,
I have a table view with 7 columns and 10 rows which displays only those values which are missing in the DataBase Table.
Is it possible to show only the missing values as '-' in a table view, the table view is having 7 different fields.
Also when the value is inserted at run time the corresponding field should be updated accordingly and the value will no longer be displayed in the table view as '-'
please advice.
Regards
Neo.

Welcome to SDN.
do you mean to say that in some rows some column values will be blank and you want to replace the blanks with '-'.
loop thru the itab which you are passing to tableview and for the blank cells pass '-'.
<i>Also when the value is inserted at run time</i>
so you are having editable tableview. to update the value back to the dbtable, you have to read it in oninputprocessing and update it to dbtable .
search the forum on how to read the user entered value from the table view so that you can update the dbtable.
Regards
Raja

Help view to get two table entries in search help

Hi,
I have created the help view for join two tables and that help view was called in the selection method for creating search help of the custom table field. since it has show inthe selection screen , it is fetching only one table entries. and the shown entries are displaying but not passing.
Please provide the steps to get the two table entries and the displayed entries should pass.
Thanks in Advance,
siva

Hi sivanag,
1. Try your view with SE16/SE16N to see if it really finds what you expect
2. Use the same data elements in help view as on selection screen
3. read documentation and F1 help on all fields you see in the search help definition - especially only field marked as EXPORT parameter will be put back on screen.
But, sincerely, I don't know what your selection-screen looks like.
Regards,
Clemens

Table view thru SE16 of Table S039

Similar Messages

Maybe you are looking for