Table where CU50 configuration data is saved

Hello All
Can you please tell me if there is a table in SAP where i can see the charecteristic value selections in CU50 screen, i mean i am looking for a Table where all th charecteristic values selected for a configurable material in Cu50 or VA02?
Thanks in Advance

Dear friend,
Please have a look at standard structure RCUKO (there is no table, only the structure).
You can try to get the data using some functional modules, I guess try the
CU_SINGLE_CONFIGURE
Good luck!

Similar Messages

Where does the data get saved from (notepad) or Notes on Windows Mobile 5?

Where does the data get saved from (notepad) or Notes on Windows Mobile 5?
(ON the Phone) Sticky note like program WM5
I ask because I synced my Blackjack 1 to my pc after about a year and MANY notes later, All the notes from the PC remained but ALL new notes on phone (a years worth) were deleted from the phone.
I would like to attempt a data recovery on my mobile device- that was an insane endeavor but i got it to work now i just need to know what to look for (what type of files to recover) and or where to recover from?
I did make the phone a drive already and have data recovery software that can pull deleted files from the phone in fat or raw data format.
Thanks.

Hi,
I think this is not the best forum for your question. This forum is for Microsoft Exchange Server's mobile connectivity issues.
Regards,
Zoltán
http://www.clamagent.org - Free Antivirus for Exchange
http://www.it-pro.hu
http://emaildetektiv.hu

Database Table where MRP Run results are saved-Urgent

Hi Gurus
i need your help in identifying the database table where the MRP Run results are saved , this is needed for creating a custom report similar to MD45(but for entire plant) where i can look and pull the sum of all the receipts and issues, ATP Quantity for a given material in a particular plant
and ignore zero quantities in the receipts and issues field
i tried in <b>MDTB</b> table, MDTB-MNG01 Quantity received or quantity required but it has no entries maintained in it and so it cannot be used.
So can you please help me with the table where i can get this information asap
thank you very much for your time and solution

Please use the code below which will help you in extracting data from MRP table.
You can enhance this program basing on your requirement.
*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
A sample program to extract data from the MRP table.
*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
REPORT ZMRPTABLE.
TABLES: MDKP, "Header Data for MRP Document
        MDTB, "MRP table
        MDTC, "Aggregated MRP table items
        T457T. "Description of MRP elements
DATA: BEGIN OF MDTBX OCCURS 0.
        INCLUDE STRUCTURE MDTB.
DATA: END   OF MDTBX.
SELECT-OPTIONS: PLANT FOR MDKP-PLWRK OBLIGATORY,
                MATNR FOR MDKP-MATNR OBLIGATORY.
CLEAR: MDKP, MDTB.
SELECT * FROM MDKP WHERE DTART EQ 'MD'
                     AND MATNR IN MATNR
                     AND PLWRK IN PLANT.
    WRITE:/ MDKP-MATNR, MDKP-PLWRK.
    IF MDKP-CFLAG EQ 'X'.
       CLEAR MDTBX. REFRESH MDTBX.
       IMPORT MDTBX FROM DATABASE MDTC(AR) ID MDKP-DTNUM.
       LOOP AT MDTBX.
         MOVE MDTBX TO MDTB.
         SELECT SINGLE * FROM T457T WHERE SPRAS = 'E'
                                      AND DELKZ = MDTB-DELKZ.
         IF MDTB-PLUMI = '-'. MULTIPLY MDTB-MNG01 BY -1. ENDIF.
         WRITE:/ MDTB-DAT00, T457T-DELB1, MDTB-VSTAT,
                                          MDTB-MNG01, MDTB-LGORT.
       ENDLOOP.
    ELSE.
       SELECT * FROM MDTB
                     WHERE DTNUM EQ MDKP-DTNUM
                     ORDER BY PRIMARY KEY.
         SELECT SINGLE * FROM T457T WHERE SPRAS = 'E'
                                      AND DELKZ = MDTB-DELKZ.
         IF MDTB-PLUMI = '-'. MULTIPLY MDTB-MNG01 BY -1. ENDIF.
         WRITE:/ MDTB-DAT00, T457T-DELB1, MDTB-VSTAT,
                                          MDTB-MNG01, MDTB-LGORT.
       ENDSELECT.
    ENDIF.
ENDSELECT.
This is taken from www.sap-img.com
Hope this helps you.

Table where the Delivery date is stored in Confirmation tab on Me23n

Hello ABAB Gurus,
Can anyone give me the table name where the Delivery date is stored in Confirmation tab in Item in ME23n.
If anyone is aware of it then please let me know .
Sagar

Hi,
Check the table EKES and field name is EINDT..
Thanks,
Naren

Tables where BEx query variants are saved (BI 7.0)

Hi Experts,
I'm looking for the BI tables where BEx 7.0 saves query variants, but I don't find nothing.
In BW 3.5 there were Table RSRVARIANT, but in BI 7.0?
Could someone help me?
Thanks in advanced
Fede

Hi Sunmit,
thanks, I found my query variants RSRPARAMETRIZA.
In RSRPARAMETRIZA there aren't information about single variable who make the variant!
In RSRVARIANT I find only variants I have created with Business explorer 3.5.
All variants of queries I have created with BEx 7 aren't in RSRVARIANT,
Should I have them in RSRVARIANT?!
or There is another table for those information about variant query of BEx 7.0...
bye
Fede

Tables where the XI Data is stored

Dear all,
Can you let me know all the tables in XI in which the data is stored.
Like where the asyncronous messages are stored(which table and what is the abap program name which gets executed to store the message id's etc in the table).
Pl list out all the tables,programs related to XI.
Also pls let me know where IDOC,Proxy,RFC related tables programs.
my mailid is srinivas5780@gmailcom

Hi,
Please go through the below weblog:
/people/gourav.khare2/blog/2007/12/12/interesting-abap-tables-in-xi-150-part-i
Look at the below thread for SXMB_MONI tables and Function module:
In Which Database Table the Messages are Stored in XI
Message Monitoring --> corresponding tables?
For IDOC:
tables are EDIDC control record table and EDIDD-data record table.
Thnx
Chirag

Table where crmd_order transaction data is stored

hi experts,
In crmd_order transaction in details tab there are two fields one is status under sales cycle and another is Expected Sales Vol.Under forecast.
Can you please let me know in whcih table i can find these details? need to update these feilds in UI.
They are not present in crmd_orderadm_table.

Hi,
You can find the Status details in table CRM_JCDS you just have to pass order guid and you'll get status details, for Expected Sales value field check in table CRMD_OPPORT_H just pass the order guid and get the required data.
Or use standard report CRM_ORDER_READ just have to pass order number/guid and get all the data you required.
Regards,
Dipesh.

Where is the data saved in the srtucture for a particular tcode

Where is the data saved in the srtucture for a particular tcode.
For eg in MM01 there is a field with RMMG1
where dioes the data get saved from this field as in backend it shows the stucture and the structure can hold data only at runtime,
Please help me
Thanks in advance
chinnu

Hi,
The strcuture : RMMG1 holds data at run time only that to it can hold only one record at a time.
so we use this structure to hold data at run time and then we insert those values into database tables for that program.
Here you can the values stored and processed in the program in the tables : MARA (for matnr ,mbrsh,mtart..),MARC (for Plant ),MARD( for storage location : lgort )...etc.
so if you want to fecth some data means first you have to choose right table to fetch information by passing values in the selection screen.
Regds
Sivaparvathi
Please reward points if helpful...

Table Where the attachment is stored .

Hi all ,
Table Where the attachment data and its details are stored ?
regards,
Naval

this program GOS_TOOLBOX_TEST creates an attachment .
i am trying to get the table where it saves using the SQL trace but couldnt get .
please suggest in which table the data related to attachement in a transaction is saved by this table.

Table for PR Release date

Hi Friends,
I want to capture the PR release date. But I could not find the table. Can anybody please provide me the table where PR relase date is captured?
In ME53N, in item detail, in "Quantities/Dates", the release date is not the actual relaease date on which the PR got released. I can see the actual release date in Environment-->Item change. But I could not find the table wheere it stores the actual release date.
Please suggest.
Thanks & Regards
Satya

Hi,
As I have explained in my mail, that field is not the actual PR release date. even afterrelease also that field is changeable. System bydefault takes the PR creation date as release date. But If I release after 10 days of PR creation, then EBAN-->FRGDT is not getting updated.
Please suggest.
Thanks & Regards
Satya

What is the Transparent Table for PO Delivery Date field

Hii All,
Does anyone know the Transparent table where the delivery date is stored for the PO line item. It's not in EKPO. Where is it?
Thanks in advance

Unfortunatly there is no diagram anywhere for the table relation.
I usually help myself by F4 search in SE11
You know e.g. table EKKO. So enter just EK* and press F4 to see all other tables starting this way.
But in most cases when I search for tables that belong somehow together I use DB15 transaction.
This gives me all tables that belong to the same archiving object.
You can start there by entering a table name and search for the archving object.
then you do it reverse and you get all tables for this object.
(Unfortunatly SAP does not have archiving objects for any table)

APO Tables for DP forecast Data

Hi All,
I am working in VMI scenario. An IDOC of type PROACT carries the
forecast data for DP.
I need to fetch the dates for which the Forecast data is already existing in the database.
Can some one name the tables where the forecast data is stored.
Regards,
Ashish

Hi Ashish,
If your Planning Area has a an export datasource that is connected to a remote cube, you can also access the contents of the Planning area using function module RSDRI_INFOPROV_READ. This uses the InfoProvider interface. There's a version of the function module that is RFC enabled as well.

Application to Read and Write the Configuration Data from a xml file

Hi,
I have to develop a Webdynpro application that will do the following:
Read the Configuration data from an xml file
If stored in a file , and the file is not found, prompt the user to provide the file location.
Pre-Populate the screen(table) with the configuration data
Allow the user to edit the data
Store the configuration data when the user hits the Save button
The config xml file details are as follows:
Regardless of the location of the configuration data, the following fields will be stored
Application (string) will always contain u201CSFA_EDOCSu201D
Key (string) eg LDAP_USER, DB_PREFIX, etc.
Type (character) u201CPu201D = Plain Text, u201CEu201D = Encrypted
Value (string)
Since I am new to WD, I would require help on this.
Please help.Its Urgent.
Regards,
Vaishali.
Edited by: vaishali dhayalan on Sep 19, 2008 8:29 AM

Hi,
I have to develop a Webdynpro application that will do the following:
Read the Configuration data from an xml file
If stored in a file , and the file is not found, prompt the user to provide the file location.
Pre-Populate the screen(table) with the configuration data
Allow the user to edit the data
Store the configuration data when the user hits the Save button
The config xml file details are as follows:
Regardless of the location of the configuration data, the following fields will be stored
Application (string) will always contain u201CSFA_EDOCSu201D
Key (string) eg LDAP_USER, DB_PREFIX, etc.
Type (character) u201CPu201D = Plain Text, u201CEu201D = Encrypted
Value (string)
Since I am new to WD, I would require help on this.
Please help.Its Urgent.
Regards,
Vaishali.
Edited by: vaishali dhayalan on Sep 19, 2008 8:29 AM

ABAP Table for PI payload data

Hi
Please let me know the Standard SAP table where XI payload data ( not headers, application data like Invoice No,Delivery No )has been stored

Hi Rajesh,
Check out the following Article to get an idea on how to fetch the PI payload from the tables. https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/909760cb-0ec8-2a10-4a96-ee8417acfbc9
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b050ff4f-84c3-2b10-3d99-8f9c44f57a17
SAP PI doesnt store payload in an XML format.
Thanks,
PP

Table name where Broadcaster precalculation variables are saved

Please help me with the table name where Broadcaster precalculation variables are saved. Thanks.

Hello Jinal
Please go to transaction SE11 and there search in database table for tables starting with
/BIC/OB*
My table for example is named as following /it is the first precalculated value set:
Transparent table -> /BIC/OB00000001
description -> Calculate with Broadcast Setting Z_CCUSTOMER_PRECALC_01
However table class is L, where so I don't knwo how to see the data..
In case you know please let me know
Best regards
Christian

Table where CU50 configuration data is saved

Similar Messages

Maybe you are looking for