Table which consists dates of activities

Hello,
I searched for the tables in CRM where activities are saved. I found the table CRMD_ORDERADM_H which consists some informations. Now I search for the tables where the valid from date and the valid to date are saved?
Anybody knows this table?
Regards
Philipp

Hi Phillip,
The field planned date will appear based on the date profile that you assigned to the transaction type of activity.
Normally the SAP standard date profiles are available which will give the fields planned date, actual date etc.
If you are in GUi then when you click the filed next to start date you can find a drop down of plan date, actual date etc.
If you are on portal then the dateprofile that is assigned to the transaction will be seen in the date tab of the transaction.
let me know if i was clear or matched your understanding.
Thanks
srini

Similar Messages

***Unable to import table which consists of nested tables

Dear all;
I have a problem on migrating my Oracle 8.1.7 database from windows nt environment into the ibm aix 4.3.3 environment. I have been using the import export utility. Exporting the data from the database does not produce any error but importing the export file produces the error as below;
Connected to: Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
Export file created by EXPORT:V08.01.07 via conventional path
import done in WE8ISO8859P1 character set and WE8ISO8859P1 NCHAR character set
. importing IIMS's objects into IIMS
IMP-00017: following statement failed with ORACLE error 2331:
"CREATE TABLE "CMGC_CURRENCY" ("CODE" VARCHAR2(10) NOT NULL ENABLE, "DESCP" "
"VARCHAR2(60) NOT NULL ENABLE, "X_RATE" NUMBER(10, 6) NOT NULL ENABLE, "X_DA"
"TE" VARCHAR2(10), "REMARK" VARCHAR2(255), "YEAR" NUMBER(4, 0) NOT NULL ENAB"
"LE, "BANK_AC" VARCHAR2(20) NOT NULL ENABLE, "NSTBL_LEDG" "NSTBL_LEDGLIST" N"
"OT NULL ENABLE, "NSTBL_XRATE" "NSTBL_XRATELIST" NOT NULL ENABLE) PCTFREE 1"
"0 PCTUSED 40 INITRANS 1 MAXTRANS 255 LOGGING STORAGE(INITIAL 65536) TABLESP"
"ACE "IIMS" NESTED TABLE "NSTBL_LEDG" STORE AS "NSTBL_LEDGLIST_LIST" RETURN "
"AS VALUE NESTED TABLE "NSTBL_XRATE" STORE AS "NSTBL_XRATELIST_LIST" RETURN"
" AS VALUE "
IMP-00003: ORACLE error 2331 encountered
ORA-02331: cannot create constraint on column of datatype Named Table Type
Import terminated successfully with warnings.
It seems that the error only occur when importing tables which consists on nested tables. I have done exporting and importing from windows NT into windows NT and from windows NT into AIX but the problem still arises. Please help.
NSTBL_LEDG and NSTBL_XRATE are the nested tables with NSTBL_LEDGLIST and NSTBL_XRATELIST as the datatype accordingly.
Thanks in advance;
andrew

Hi Sayak,
This means we need to installed Oracle client to resolve this problem. Can you please share if you have some knowledge regarding the same.
Thanks,
Mohit

Whats SAP internal table which populate data in reuest tab of manags of DSO

HI team ,
I want to know do any one know about SAP interanl table which might be used to polpulate data in Request tab of DSO manage.
Where we see all information about request loaded in DSO , I want to know that underline table name.
Regards
Ashutosh D

Hi
Table RSICCONT table contains the requests that are actually loaded in a target.(the table which actually populates the data in request tab)
Table RSMONICDP contains the request id of the fact table.
Table RSODSACTREQ contains information if an ODS is available for reporting/deleting inactive requests also possible.
In table RSBODSLOGSTATE see the entries for your DSO and request
Hope this helps
Regards
Shilpa

Need config table which stores data for Vendor Master changes

Hi Gurus,
I need to have the name of the config tables which store the details of the Vendor Master configuration changes based on account group information.
For Example,
For a given Account Group(ZM09), the VAT Registration field in the control data tab of the transaction XK02 is suppressed. and for other Account Groups the VAT Registration field is appearing in the Control data tab of the XK02 transaction.
So I need to determine at run time for which vendor account group the VAT Reg field is suppressed and for which it is appearing.
Hence I require the name of the Config table in SAP which stores this information.

Hi,
Use this transaction S_ALR_87010039 (Program RFKABL00)
You can select all levels of changes (i.e. General, Company Code, purchasing org)or individual levels only.
If you want the tables then CDHDR & CDPOS will provide all the details.
Regards
Hiren K.Chitalia

Table which stores the dates in different languages.

Hi experts,
Do we have any table which stores dates in different languages
like
December in EN
Dezemer in DE.

Hi,
You may use T247 table for this getting the name of the month(LTX feild) as per the language specified.
Rewards if useful,
Regards,
Saurabh

Modelling Time Dimension with Fact Table containing Start Date and End Date

Hi Gurus,
I have a time dimension with Year till Date. I have a fact table which consists of Start Date, End Date, Person ID, Department ID.
How do i design Time dimension with fact table the below scenario
In the dashboard i have start Month and End month as prompts.
In the report i need to display Count(Person ID) > Start Date and < End Date along the trend.
For instance, i have selected Jan-2009 as start date and Apr-2009 as End Date, then i need to display Count(Person ID) of Jan-2009, Feb2009, Mar-2009 andApr-2009.
I Can not connect Time dimension with only Start Date or only with End Date to get the trend along the months.
Please advice on the issue which i am having.

Hi,
Thanks for the response, Infact i tried using Complex join in physical layer. I have considered Time table joined with Fact table, and used >= and took and alias of the Time table and joined fact table using <=. When coming to BMM, i am not knowing how do i design this as if i merge the both the time dimensiona and its alias into single table, values will not be correct and if i make them as seperate columns. i can not show the trend as both are different columns.
Can you please let know where i am going wrong.
Thanks

In Which R/3 Table, the Extraction Date should be RESET to Limit DELTA ???

Hi all,
We have a daily delta extraction setup for DataSource 0FI_GL_4 from R/3 into ODS. I think there is a table on R/3 side where we could RESET the extraction date (?) to limit the delta reload incase something goes wrong with delta process. Without this reset, it may take 2-3 WEEKS for us.
Is any one has any idea about this table , PLEASE....
Thanks.

hi Venkat,
check oss note 485958-BW-BCT-FI: Repeating delta extractions
Symptom
This note provides the option of repeating delta extractions under certain conditions.
The note is valid for the DataSources listed below:
0FI_AP_4 - Accounts Payable: Line Items
0FI_AR_4 - Accounts Receivable: Line Items
0FI_GL_4 - General Ledger: Line Items
0FI_TX_4 Taxes: Line Items
0FI_AP_6 Accounts Payable: Transaction Figures Using Delta Extraction
0FI_AR_6 Accounts Receivable: Transaction Figures Using Delta Extraction
0FI_GL_6 - General Ledger: Transaction Figures Using Delta Extraction
0FI_AP_7 - Accounts Payable: Special G/L Transaction Figures Using Delta Extraction
0FI_AR_7 - Accounts Receivable: Special G/L Transaction Figures Using Delta Extraction
0FI_GL_7 - General Ledger: Cost of Sales Accounting Ledger Using Delta Extraction
0FI_AR_8 - Accounts Receivable: Credit Management: Central Data Using Delta Extraction
0FI_AR_9 - Accounts Receivable: Credit Management: Control Area Data Using Delta Extraction
0FI_AR_10 - Accounts Receivable: Payment History Using Delta Extraction
Other terms
BWOM2_TIMEST, TIMESTAMP, BWOM_SETTINGS, LAST_TS, delta, init
Reason and Prerequisites
For test or correction purposes you require a function to repeat delta extractions.
In the standard system, you can repeat the delta extractions for the last sixty days.
The number of days is defined by the 'DELTIMEST' parameter in the BWOM_SETTINGS table.
For all DataSources mentioned above you can repeat the delta extraction without problems because all DataSources use an ODS object. The system automatically filters out data that is selected several times.
Solution
The solution consists of resetting the time stamps used for the delta extraction in the BWOM2_TIMEST table to a certain date.
To do this, you must reset the 'X' marker in the 'LAST_TS' column for the last successful delta extraction.
The next delta extraction then loads all data created or changed as of this date to the BW system.
To reset the 'X' marker in the 'LAST_TS' column, use the 'BWOM2_TIMEST' report. If the report is not yet available in you system, you can install it as described in Note 836288.
Caution - important note
If you repeat several delta extractions in a run using this note, the number of the extracted records will in most cases be smaller than the total of the individual delta extractions.
This can happen in the following cases:
If documents are contained in several individual delta extractions due to document changes. The system selects these documents only once.
If you have set parameter BWFIOVERLA = X in the BWOM_SETTINGS table. (See Note 485958)
In this case, the upper limit of the period for the data selection is not, as usual, 23:59:59 of the previous day. The system also extracts all existing documents of the current day. These documents are also contained in the following delta extraction.
1. If you can load the expected data volume in one delta extraction, proceed as follows:
Execute the 'BWOM2_TIMEST' report for the relevant DataSource.
Remove the marker in the entry of the last delta extraction.
In the columns for the date of the time stamp and the time of the time stamp, you can see up to when the individual data extractions have extracted data.
Select the entry up to which the data in your BW system is still correct.
Save the changes.
Do not make any further changes in the BWOM2_TIMEST table.
              The next delta extraction uses the date + 1 of the selected entry as a lower limit for the data selection and the current date - 1 for the upper limit.
2. If you must load the expected data volume in several parts, proceed as follows:
Caution: There are the following two cases:.
a) The 'BWFIOVERLA' parameter in the BWOM_SETTINGS table is not set.
           Execute the 'BWOM2_TIMEST' report for the relevant DataSource.
           Remove the marker in the entry of the last delta extraction.
           In the columns for the date of the time stamp and the time of the time stamp, you can see up to when the individual data extractions have extracted data.
Select the entry up to which the data in your BW system is still correct.
           Save the changes.
Do not make any further changes in the BWOM2_TIMEST table.
               The next delta extraction uses the date + 1 of the selected entry as a lower limit for the data selection.
You can control the upper limit for the data selection by changing the ' BWFISAFETY' parameter in the BWOM_SETTINGS table. The upper limit is determined using the current date minus the value of the 'BWFISAFETY' parameter (default = 1).
If you want to extract the data of the last twenty days in four parts, for example, set the parameter as follows in Transaction SE16:
before the 1. delta extraction > > BWFISAFETY = 15
before the 2. delta extraction > > BWFISAFETY = 10
before the 3. delta extraction > > BWFISAFETY = 5
before the 4. delta extraction > > BWFISAFETY = 1 (= default)
b) The 'BWFIOVERLA' parameter in the BWOM_SETTINGS table is set (=X).
           First, deactivate the 'BWFIOVERLA' parameter in the BWOM_SETTINGS table. This is necessary because if you do not do this, the system ignores the settings of the 'BWFISAFETY' parameter.
           Execute the 'BWOM2_TIMEST' report for the relevant DataSource.
           Remove the marker in the entry of the last delta extraction.
           In the columns for the date of the time stamp and the time of the time stamp you can see up to when the individual data extractions have extracted data.
Do NOT select the entry up to which the data in your BW system is still correct, rather select the entry before that.
           Save the changes.
Do not make any further changes in the BWOM2_TIMEST table.
               The next delta extraction uses the date + 1 of the selected entry as a lower limit for the data selection.
You can control the upper limit for the data selection by changing the ' BWFISAFETY' parameter in the BWOM_SETTINGS table. The upper limit is determined using the current date minus the value of the 'BWFISAFETY' parameter (default = 1).
If for example you want to extract the data of the last twenty days in four parts, set the parameter in Transaction SE16 as follows:
before the 1. delta extraction > > BWFISAFETY = 15
before the 2. delta extraction > > BWFISAFETY = 10
before the 3. delta extraction > > BWFISAFETY = 5
before the 4. delta extraction > > BWFISAFETY = 1 (= default)
                and parameter BWFIOVERLA = X to return to the originaldelta mode.

How to get the data from a table which are availble in MD04

Hello,
Can you please let me know the tables in which the 'data available in MD04' are stored.
I would like to have the data pertaining to the customer order/Item with requirements available in MD04.
Thanks and Regards,
Jana.

Probably the easiest way in this case is to run the performance trace (System/Utilities/Performance trace). Start transaction MD04, put on the trace in another window, press enter to see the stock/requirements list, then stop the trace and list the results. Then you'll see which tables were accesses with which queries.

Which table stores the data of transaction FBL1N...?

Hi,
Please help me find out which table stores the data ,generated from transaction FBL1N..Actually i need to find out the g/l account against the vendor account that is being displayed in FBL3N's document overview.

Hi,
Data will be retrieved from following table :
tables: lfa1, lfb1, bsik, bsid, kna1, t001,t005, SKAT, SKB1.
In BSIK you have both LIFNR and HKONT. You will get the data based on the LIFNR and HKONT. LIFNR is Vendor and HKONT is GL assigned to the vendor.
Thanks,
Sriram Ponna.
Message was edited by:
Sriram Ponna

How to Read data from a table which is defined as a field in another table

Hi
Iam working with FM: 'CUCB_GET_CONFIGURATION'
 Import parameter configuration as a table.
but configuration has another table as a field.
i want to read the inner table fields.
how can i read the table which is defined as field in configuration table.
Please try to give me a solution.
can i have the declartions too....
Thanks,
sri

Hi jonnakuti,
1. simple
2.
DATA : CONFG TYPE IBCO2_INSTANCE_TAB2.
DATA : WA TYPE LINE OF IBCO2_INSTANCE_TAB2.
3. just copy paste
4.
report abc.
TYPE-POOLS : IBCO2.
DATA : INSTANCE TYPE CUIB_CUOBJ.
DATA : CONFG TYPE IBCO2_INSTANCE_TAB2.
DATA : WA TYPE LINE OF IBCO2_INSTANCE_TAB2.
CALL FUNCTION 'CUCB_GET_CONFIGURATION'
EXPORTING
 INSTANCE = INSTANCE
IS_BUSINESS_OBJECT =
IV_MOMENT =
IV_WITH_DB_INSTANCE =
IMPORTING
IBASE =
 CONFIGURATION = CONFG
EO_CBASE_REF =
EXCEPTIONS
 INVALID_INPUT = 1
 INVALID_INSTANCE = 2
 INSTANCE_IS_A_CLASSIFICATION = 3
 OTHERS = 4
read like this
LOOP AT CONFG INTO WA.
ENDLOOP.
regards,
amit m.

INSERTING DATA INTO A SQL SERVER 2005 TABLE, WHICH HAS A IDENTITY COLUMN

Hi All,
I have to insert the data into a SQL SERVER 2005 Database table.
I am able to insert the data into a normal SQL Server table.
When I am trying to insert the data into a SQL Server table, which has a identity column (i.e. auto increment column in Oracle) I am getting error saying that can't insert value explicitly when IDENTITY_INSERT is set to OFF.
Had anybody tried this??
There are some SRs on this issue, Oracle agreed that it is a bug. I am wondering if there is any workaround from any one of you (refer Insert in MS-SQL database table with IDENTITY COLUMN
Thanks
V Kumar

Even I had raised a SR on this in October 2008. But didn't get any solution for a long time, finally I had removed the identity column from the table. I can't to that now :).
I am using 10.1.3.3.0 and MS SQL SERVER 2005, They said it is working for MS SQL SERVER TABLE, if the identity column is not a primary key and asked me to refer to note 744735.1.
I had followed that note, but still it is not working for me.
But my requirement is it should work for a MS SQL SERVER 2005 table, which has identity column as primary key.
Thanks
V Kumar

Need to make a copy/clone of a table which has sdo_geometry data type

Folks,
We are running Oracle 11gr1 on Suse Linux platform.
We have a requirement, where we need to make a copy of a table, in the same database but in a difference schema, the source table has about 130 millions rows and also has the sdo_getometry data type.
I tried materialized view, but MV does not support sdo_geometry data type.
According to one of my DBAs, doing it via data pump , will take few days, which is not acceptable.
Is there a way, we can make a copy of this table in the same db ?
Thanks
Ashish

Siva,
This is not for backup purpose.
Here is the background information on this requirement.
I need to have a static copy of a table, which has spatial column, sdo_geometry in it.
So we can run another application against this table, just read-only, since we need static data, data in the source table changes quite often.
One of my DBA suggested to have another instance/database, to keep the copy of the source table, I thought idea of having another database just to keep a copy of a table is an over kill.
That is why I had asked this question and you had provided a viable solution.
Then we need to refresh this table , with the data (changes) from the source table, maybe once in 2- 3 weeks.
I tried creating a Materialized view, but it does not support Spatial columns.
So now I am trying to figure out, the most efficient way to refresh the clone table from the source table.
Regards,
Ashish

Which master data table to be used to get attribute value

Hi all,
I am writing routine in update rule to get data for one master data attribute of master data 0customer.
But I am cofused in choosing master data table to get data.
There are two master data table in master data tab of 0customer characteristics.
1. View of MstrDtaTbls :- /BI0/MCUSTOMER
2. Master data tab :- /BI0/PCUSTOMER
Suggest me which one to take .
Although I have tried with 2 one and it is working fine.

Hi,
If the attribute is not time-dependent please use /BI0/PCUSTOMER, else use /BIC/QRCOSTCTR.
Just remember P table and Q table.
Regards,
Frank

From which table i can get all activities ?

I can get all active processes use below sql, select * from fuego_depproc a where a.fuego_status != 'D', but i don't know from which table i can get all activities of each process, who can tell me ? thanks.

I don't think there is a very easy way to do that.... The Directory doesn't define the activities of a process, only the process itself, and the engine only cares about the where the instances currently are....
One way I can think of, is use the Directory table FUEGO_PROCDEF_SOURCE and get the xml, then parse that and strip out the activity names...
HTH,
-Kevin

ML60 tcode !! which table stores the data which is shown in ML60 ..urgent !

Hi Guys,
Tcode ML60 shows the Relase Group, Relase strategy and all....
Can anyone tell me which table is that which the stores the data which is shown in tcode ML60 ???
The problem that i am facing is that for ML60 the amount that is fixed for every relase staretgy is in text fields eq 2.5k - 50 K USD but i want this value to be in numeric field and not as text.
If i will find that table which stores all this information, may be i will get this field which stores this text as a numeric field.
Please help me find this table.
And also can any one tell me how to link PO document type to the relase group ??
Points will be awarded.
Thanks a lot
Rahul

Hi guys,
Yes ML60 is a standard SAP transaction but may be ML60 is not configured to the system which you are using. Otherwise also if u will search google, you will find ML60.
Hi Anji, i have already tried all these tables, but none of these tables store the limit for each release strategy.
I can see the limit only in ML60 tcode
Thanks
Rahul

Table which consists dates of activities

Similar Messages

Maybe you are looking for