Whats SAP internal table which populate data in reuest tab of manags of DSO

HI team ,
I want to know do any one know about SAP interanl table which might be used to polpulate data in Request tab of DSO manage.
Where we see all information about request loaded in DSO , I want to know that underline table name.
Regards
Ashutosh D

Hi
Table RSICCONT table contains the requests that are actually loaded in a target.(the table which actually populates the data in request tab)
Table RSMONICDP contains the request id of the fact table.
Table RSODSACTREQ contains information if an ODS is available for reporting/deleting inactive requests also possible.
In table RSBODSLOGSTATE see the entries for your DSO and request
Hope this helps
Regards
Shilpa

Similar Messages

What is the table which stores the SM04 currently active users data

HI all,
what is the table which stores the SM04 currently active users data in sap?
plzzzzzzzzz help me..
Thanks all in advance ,
Malti

Hi,
Pl. check in tables USR02/USR01 for the list of users & logon data.
Regards,
SDS

How to populate dynamic internal table fields with data??

Hi Folks,
How to assign a particular internal table field to a dynamically assigned internal table?
I have an excel sheet, and i upload the excel sheet data into an internal IT_EXLOAD table using FM ALSM_EXCEL_TO_INTERNAL_TABLE
Now i created a dynamic internal table which has the same column as in my DB table.
I have to fill the dynamically created Internal table with the IT_EXLOAD data dynamically.
Suppose in future if i add some field in DB table and for that field if i add some column in excel sheet there is no need to change in the program.
Looking for reply...
Best Regards,
Sayak

hi,
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            filename                = p_path
            i_begin_col             = '1'
            i_begin_row             = '2'
            i_end_col               = '2'
            i_end_row               = '1000'
       TABLES
            intern                  = intern
       EXCEPTIONS
            inconsistent_parameters = 1
            upload_ole              = 2
            OTHERS                  = 3.
*declare intern_tmp as internal table tb_data in wich you want the data
*and declare a field symbol <fs_123>
LOOP AT intern.
    ASSIGN COMPONENT intern-col OF STRUCTURE
    intern_tmp TO <fs_123>.
    IF NOT <fs_123> IS ASSIGNED.
      CLEAR intern.
      CLEAR intern_tmp.
      CONTINUE.
    ENDIF.
    <fs_123> = intern-value.
    AT END OF row.
      CLEAR tb_data.
      MOVE-CORRESPONDING: intern_tmp TO tb_data.
      APPEND tb_data.
      CLEAR intern_tmp.
    ENDAT.
    CLEAR intern.
ENDLOOP.
**paste this code and you can see the data in ur tables dynamically.
Thanks
Nitin Sachdeva

What is internal table? read the another questions

What are internal tables? How do you get the number of lines in an internal table? How to use a specific number occurs statement?
send me replay also

hi,
try this links....
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb35de358411d1829f0000e829fbfe/content.htm
An internal table is one of two structured data types in ABAP. It can contain any number of identically structured rows, with or without a header line.
The header line is similar to a structure and serves as the work area of the internal table. The data type of individual rows can be either elementary or structured.
Internal tables provide a means of taking data from a fixed structure and storing it in working memory in ABAP. The data is stored line by line in memory, and each line has the same structure. In ABAP, internal tables fulfill the function of arrays. Since they are dynamic data objects, they save the programmer the task of dynamic memory management in his or her programs. You should use internal tables whenever you want to process a dataset with a fixed structure within a program. A particularly important use for internal tables is for storing and formatting data from a database table within a program. They are also a good way of including very complicated data structures in an ABAP program.
Fields of Internal Tables
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-TFILL
After the statements DESCRIBE TABLE, LOOP AT, and READ TABLE, SY-TFILL contains the number of lines in the relevant internal table.
SY-TLENG
After the statements DESCRIBE TABLE, LOOP AT, and READ TABLE, SY-TLENG contains the length of the lines in the relevant internal table.
SY-TOCCU
After the statements DESCRIBE TABLE, LOOP AT, and READ TABLE, SY-TLENG contains the initial amount of memory allocated to the relevant internal table.
i think this will solve your problem don't forget to reward points.
regards,

What happens internally while loading master data and transaction?

hello,
What happens internally and which tables are used while loading master data and transaction?
I have loaded the data in DSO, but i am not getting value of particular InfoObject after loading the data.
I have executed Attribute change run also.
Kindly explain ...
Thanks,
Sonu

Hi,
Master data,
Material Indipendent data can be sent without any dependency.
Material Dependent data sequence is as follow.
Plant,
MRP areas,
Supply area,
Material,
MRP area material,
planning material,
ATP check,
Purchase info recards,
schedule agg,
PPM or PDS (But before PPM or PDS work center should send to apo) If PDS is sending then BOM should send before PDS.
Transaction data.
As per the business requirement what is planning in apo.
Regards,
Kishore Reddy.

Access db upload to SAP internal table table

Dear friends.
i am supposed to develop a program that upload the MS-Access DB table to SAP internal table. I have received the code wich is ok...but i am failed to provide it porper input as i am not receiving n e values in internall tables. please help me to understand this program i am providing you its source code which i received from this forum only...apart from it, is there n e other alternative to upload the data from MS access to SAP . I have Ms Access Data base db2.mdb as per the prgram and db2.mdb has tab (table). please see the code and help me in this regards..thanking you,,,
REPORT ZYSH01.
INCLUDE ole2incl.
DATA: con TYPE ole2_object,
rec TYPE ole2_object.
DATA SQL(1023).
DATA: BEGIN OF SPL OCCURS 0,
VAL(1023),
END OF SPL.
DATA: BEGIN OF I1 OCCURS 0,
F1(10) ,
F2 TYPE I,
END OF I1.
IF con-header IS INITIAL OR con-handle = -1.
CREATE OBJECT con 'ADODB.Connection'.
IF NOT sy-subrc = 0.
EXIT.
ENDIF.
CREATE OBJECT REC 'ADODB.Recordset'.
IF NOT sy-subrc = 0.
EXIT.
ENDIF.
ENDIF.
MDB connetion infomations ....
CONCATENATE 'Provider=' '''Microsoft.Jet.OLEDB.4.0''' ';'
INTO SQL.
CONCATENATE SQL 'Password=' '''''' ';'
INTO SQL.
CONCATENATE SQL 'User ID=' '''Admin''' ';'
INTO SQL.
CONCATENATE SQL 'Data Source=' '''C:\db2.mdb''' ';'
INTO SQL.
CONCATENATE SQL 'Mode=' '''Share Deny None'''
INTO SQL.
MDB connection ...
CALL METHOD OF CON 'Open'
EXPORTING #1 = SQL.
Query (insert) statement ...
SQL = 'insert into [test] values('.
CONCATENATE SQL '''A''' ',' '''1''' ')' INTO SQL.
Query run ...
CALL METHOD OF REC 'Open'
EXPORTING #1 = SQL
#2 = CON
#3 = '1'.
Query (select) statement ...
SQL = 'select * from[test]'.
Query run ...
CALL METHOD OF REC 'Open'
EXPORTING #1 = SQL
#2 = CON
#3 = '1'.
Selecting MDB record into SAP internal table ...
DO.
CALL METHOD OF REC 'getstring' = SQL
EXPORTING #1 = '2' "Do not modify!
#2 = 1 "Do not modify!
#3 = '|' "Do not modify!
#4 = '|'. "Do not modify!
IF SUBRC EQ 0.
REFRESH SPL. CLEAR SPL.
SPLIT SQL AT '|' INTO TABLE SPL.
LOOP AT SPL.
CASE SY-TABIX.
WHEN 1.
I1-F1 = SPL-VAL.
WHEN OTHERS.
I1-F2 = SPL-VAL.
ENDCASE.
ENDLOOP.
APPEND I1. CLEAR I1.
ELSE.
EXIT.
ENDIF.
ENDDO.
Result writing ...
LOOP AT I1.
WRITE: AT /1(10) I1-F1,
AT (10) I1-F2.
ENDLOOP.
connetion close & destroy
FREE OBJECT con.
FREE OBJECT rec.

Hi,
Make one proves, but:
CALL METHOD OF CON 'Open'
EXPORTING #1 = SQL.
return -> <b>sy-subrc = 2.</b>
Please, helpme.
Thank you.
Arecio

Displaying an internal table with raw data in an ALV

Hi Experts,
Can you please help me out I'm retrieving an ABAP Report List which i submitted to memory, I'm using the function module LIST_FROM_MEMORY to retrieve the list from memory and storing it in an internal table. The problem is i'm struggling to display the List using an ALV coz the internal table contains raw data. Your help wil be much appreciated.

My ASCII internal table is empty. Below I have included a code sample of what I want to do.
Type-pools slis.
DATA: MTAB_REPORT_LIST LIKE ABAPLIST OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF MTAB_REPORT_ASCII OCCURS 0,
        LINE(255) TYPE C,
      END OF MTAB_REPORT_ASCII.
START-OF-SELECTION.
*-- Submit a report. This one is the chart of accounts
SUBMIT ZPRINTREPORT
    EXPORTING LIST TO MEMORY           " Save list in memory
    AND RETURN.    " Return control to this program
END-OF-SELECTION.
*-- Get the list from memory
CALL FUNCTION 'LIST_FROM_MEMORY'
       TABLES
            LISTOBJECT = MTAB_REPORT_LIST
       EXCEPTIONS
            NOT_FOUND = 1
            OTHERS     = 2.
if sy-subrc <> 0.
write / 'unable 2 retrieve list from memory'.
else.
"REFRESH MTAB_REPORT_ASCII.
CALL FUNCTION 'LIST_TO_ASCI'
TABLES
listasci = MTAB_REPORT_ASCII " list converted to ASCII
listobject = MTAB_REPORT_LIST
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.
if sy-subrc = 1.
   write 'list ASCII list empty'.
else.
WRITE: MTAB_REPORT_ASCII, ' ff'.
" perform build_alv tables MTAB_REPORT_LIST.
endif.
endif.
"CALL FUNCTION 'WRITE_LIST'
"      TABLES
"           LISTOBJECT = MTAB_REPORT_LIST
"      EXCEPTIONS
"           EMPTY_LIST = 1
"           OTHERS     = 2.
FORM build_alv tables MTAB_REPORT_ASCII.
ALV required data objects.
"DATA: w_title   TYPE lvc_title,
"        w_comm    TYPE slis_formname,
"        w_status TYPE slis_formname,
"        x_layout TYPE slis_layout_alv,
"        t_event    TYPE slis_t_event,
"        t_fieldcat TYPE slis_t_fieldcat_alv,
"        t_sort     TYPE slis_t_sortinfo_alv.
data int_fcat type SLIS_T_FIELDCAT_ALV.
Layout
x_layout-zebra = 'X'.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
       EXPORTING
            I_PROGRAM_NAME         = sy-repid
            I_INTERNAL_TABNAME     = 'MTAB_REPORT_ASCII'
            I_INCLNAME             = sy-repid
       CHANGING
            CT_FIELDCAT            = int_fcat
       EXCEPTIONS
            INCONSISTENT_INTERFACE = 1
            PROGRAM_ERROR          = 2
            OTHERS                 = 3.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM = sy-repid
            IT_FIELDCAT        = int_fcat
            I_SAVE             = 'A'
       TABLES
            T_OUTTAB           = MTAB_REPORT_ASCII
       EXCEPTIONS
            PROGRAM_ERROR      = 1
            OTHERS             = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.

Value of new field in SAP internal table does not appear in HTML

There is already an existing web application. (has both SAP and HTML programs)
I only need to add one field in the SAP internal table and display the value in HTML.
I activated and pushed the publish button in SAP.
Still, it is not read successfully in HTML and therefore not displayed in the GUI.
What step did I miss?

Hi,
To publish completely an internet service, try SIAC_PUBLISH_ALL_INTERNAL transaction.
Hope this helps,
Iván.

How to define an internal table which have to be dynamic

Hallo,
here's a problem that i have to solve (but how ?).
I defined an internal Table with 2 columns:
col1: tablename
col2: fieldname
This table is filled with an unknown number of datasets like this:
dataset1: A001 KAPPL
dataset2: A001 KNUMH
dataset3: A903 KUNNR and so on.
I don't know which tablenames and fieldnames are contained.
Now i have to read those fields (e.g. KAPPL) from those tables (e.g. A001) into an internal table.
But i don't know how to define this internal table.
Could anyone help me please ?
Thanks a lot.
Silvio

Hi Wirth
DATA:
w_tabname TYPE w_tabname,
w_dref TYPE REF TO data,
table_name TYPE tadir-obj_name.
FIELD-SYMBOLS: <t_itab> TYPE ANY TABLE.
READ YOUR INTERNAL TABLE (DATA SET) AND GET THE TABLE NAME,
AND PASS IT TO W_TABNAME.
w_tabname = A001.
CREATE DATA w_dref TYPE TABLE OF (w_tabname).
ASSIGN w_dref->* TO <t_itab>.
Now use <t_itab> as your internal table to fetch data .
<t_itab> will have the structure of A001.
SELECT *
FROM (w_tabname) UP TO 10 ROWS
INTO TABLE <t_itab>.
Regards
Hareesh Menon

How to fill internal table with no data in debugging mode

Hi all,
I modified one existing program.Now I want to test it.I am not given test data.So in the middle of my debugging, I found that one internal table with no data.My problem is how to fill that internal table with few records in that debugging mode just as we change contents in debugging mode.If I want to proceed further means that internal table must have some records.
Please I dont know how to create test data so I am trying to create values temporarily in debugging mode only.
Thanks,
Balaji

Hi,
In the debugging do the following..
Click the Table button..
Double click on the internal table name..
Then in the bottom of the screen you will get the buttons like CHANGE, INSERT, APPEND, DELETE..
Use the APPEND button to insert records to the internal table..
Thanks,
Naren

Dynamic Internal Table for reading data from external file

Hello All,
The task was to create a internal table with dynamic columns,
Actually this is my first task in the WebAS 6.20, my program is based on input file provided by user with certain effort. this file can have different effort for a one yr to five year frame..
I needed to read the raw data from file, based on months create a internal table to hold the data, after this i need to validate the data...
I have browsed thru dynamic internal table topic, but couldn't find any dynamic appending structure, the dynamic structure would contains 12 month fileds.
can any one help me in getting my task completed..
Thanks
Kumar

Hi,
I see that you posted the same question a couple of days ago at Dynamic Internal Table for reading data from external file Didn't Charles's response address your problem?
Regards

Excel data transfer into SAP internal table with GUI_UPLOAD

hi all,
i m using SRM4 system and i wanted to develop one report which will upload data from excel and convert it into IT.
i know that many threads are posted on this topic.
but my requirement is slight different. in the system only one function module is available that is "GUI_UPLOAD" and we want that user shd not save file as tab delimited before calling this fm. instead, program shd take care of all these things...
please suggest something asap..
helpful ans will be rewarded..
thanks,
jigs.

Dear Jigs,
Please go though the following lines of code:
D A T A D E C L A R A T I O N *
TABLES: ANEP,
BKPF.
TYPES: BEGIN OF TY_TABDATA,
MANDT LIKE SY-MANDT, " Client
ZSLNUM LIKE ZSHIFTDEPN-ZSLNUM, " Serial Number
ZASSET LIKE ZSHIFTDEPN-ZASSET, " Original asset that was transferred
ZYEAR LIKE ZSHIFTDEPN-ZYEAR, " Fiscal Year
ZPERIOD LIKE ZSHIFTDEPN-ZPERIOD, " Fiscal Period
ZSHIFT1 LIKE ZSHIFTDEPN-ZSHIFT1, " Shift No. 1
ZSHIFT2 LIKE ZSHIFTDEPN-ZSHIFT1, " Shift No. 2
ZSHIFT3 LIKE ZSHIFTDEPN-ZSHIFT1, " Shift No. 3
END OF TY_TABDATA.
Declaration of the Internal Table with Header Line comprising of the uploaded data.
DATA: BEGIN OF IT_FILE_UPLOAD OCCURS 0.
INCLUDE STRUCTURE ALSMEX_TABLINE. " Rows for Table with Excel Data
DATA: END OF IT_FILE_UPLOAD.
S E L E C T I O N - S C R E E N *
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME,
BEGIN OF BLOCK B2 WITH FRAME.
PARAMETERS: P_FNAME LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK B2,
END OF BLOCK B1.
E V E N T : AT S E L E C T I O N - S C R E E N *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FNAME.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = 'X'
MASK = '.'
CHANGING
FILE_NAME = P_FNAME
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
E V E N T : S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Upload Excel file into Internal Table.
PERFORM UPLOAD_EXCEL_FILE.
Organize the uploaded data into another Internal Table.
PERFORM ORGANIZE_UPLOADED_DATA.
E V E N T : E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
*& Form UPLOAD_EXCEL_FILE
text
--> p1 text
<-- p2 text
FORM UPLOAD_EXCEL_FILE .
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = P_FNAME
I_BEGIN_COL = 1
I_BEGIN_ROW = 3
I_END_COL = 7
I_END_ROW = 32000
TABLES
INTERN = IT_FILE_UPLOAD
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " UPLOAD_EXCEL_FILE
*& Form ORGANIZE_UPLOADED_DATA
text
--> p1 text
<-- p2 text
FORM ORGANIZE_UPLOADED_DATA .
SORT IT_FILE_UPLOAD BY ROW
COL.
LOOP AT IT_FILE_UPLOAD.
CASE IT_FILE_UPLOAD-COL.
WHEN 1.
WA_TABDATA-ZSLNUM = IT_FILE_UPLOAD-VALUE.
WHEN 2.
WA_TABDATA-ZASSET = IT_FILE_UPLOAD-VALUE.
WHEN 3.
WA_TABDATA-ZYEAR = IT_FILE_UPLOAD-VALUE.
WHEN 4.
WA_TABDATA-ZPERIOD = IT_FILE_UPLOAD-VALUE.
WHEN 5.
WA_TABDATA-ZSHIFT1 = IT_FILE_UPLOAD-VALUE.
WHEN 6.
WA_TABDATA-ZSHIFT2 = IT_FILE_UPLOAD-VALUE.
WHEN 7.
WA_TABDATA-ZSHIFT3 = IT_FILE_UPLOAD-VALUE.
ENDCASE.
AT END OF ROW.
WA_TABDATA-MANDT = SY-MANDT.
APPEND WA_TABDATA TO IT_TABDATA.
CLEAR: WA_TABDATA.
ENDAT.
ENDLOOP.
ENDFORM. " ORGANIZE_UPLOADED_DATA
In the subroutine --> ORGANIZE_UPLOADED_DATA, data are organized as per the structure declared above.
Regards,
Abir
Don't forget to award points *

Comapare internal tables which are in tree format

Hi guys,
Consider internal table
     level | material-no.|quantity
      1 | mat-1 |              10
      2 |             mat-5 |             1
      3            |   mat-2    |           1
      3   |   mat-4 |      12
      2    | mat-12      | 11
      3    | mat-15      | 12
................................>mat1 ends here..it contains mat5 and mat 12 which in turn contain
.......................mat2 & 4 and mat 15 respectively.
      1    | mat-8     |    1
      2    | mat-6     |     3
      2    | mat-100    |    5
......................................>mat 8 ends here
      1 |    mat -6    |    13
.......................................>mat 6 ends here
This data is in one internal table, here there are 3 main materials (1,8,6) which are in-turn made of other materials.
material at level 1 is made of materials at level 2
and in-turn materials at level2 are made up of materials at level3 .
Now same material can exist at different levels ...
What would be the efficient way to compare two such internal tables and comparisons are done wrt quantity but level and hierarchy at which material exits matters and
comparison shuld be done at each level .
if both materials are in same hierarchy in both tables but diff in quantity then they are unequal .
if both materials are in same hierarchy in both tables and equal in quantity then they are equal .
if that material exist in one but doesnot exist in other table in similar hierarchy then its rendered as
not found.
many thanks in advance.

Hi Anurag,
Thanks for the reply but the number of levels is not always 3(it completely depends on data) .I came up with one solution --what I have done is , created one more column <b>HPATH</b> in the internal table and kept hierarchy relationship ..i.e
level| material| qty | HPATH(hierarchy path)
1 | mat-1 | 10 | mat-1
2 | mat-5 | 1 | mat-1 2 mat-5
3 | mat-2 | 1 | mat-1 2 mat-5 3 mat-2
3 | mat-4 | 12 | mat-1 2 mat-5 3 mat-4
2 | mat-12 | 11 | mat-1 2 mat-12
3 | mat-15 | 12 | mat-1 2 mat-12 3 mat-15
1 | mat-8 | 1 | mat-8
2 | mat-6 | 3 | mat-8 2 mat-6
2 | mat-100 | 5 | mat-8 2 mat-100
2 and 3 are the path seperates..which indicate the level..
Thus I get key as unique for each material depending on its position in heirarchy ..
Then I looped wrt one table and read data form other table with HPATH as key and compared it .
This solved it...
The number of levels doesnot matter in this solution...
Thanks once again for replying to my post. I would be to happy to put up the code if u want..

Appending internal table which is referenced by field-symbol

Hi,
I have a selection screen field called SP$00005 which is not known until runtime as the field is selected in Adhoc Query (SAP Query) by the user.
In the customer exit I am attempting to write code to default in a range to this field - it is a date field and I want to enter the range 01.04.2007 - 30.04.2007.
As select-options require the appending of the screen field table SP$00005 I need a way of adding an entry to this table.
Please see my latest attempt below which appends the correct value to the field symbol <startdate> but this entry does not appear in the internal table SP$00005 when stepping through at runtime.
Can anyone suggest a possible solution?
Thanks,
Alan
data: ref_field(8) type c.
field-symbols: <startdate> type table. "table = STANDARD by default
types: begin of sp$00005, "type definition required for syntax check
              sign(1),
              option(2),
              low type d,
              high type d,
            end of sp$00005.
data: lt_ref type ref to data.
ranges: selection for sy-datum.
ref_field = 'SP$00005'.
create data lt_ref type table of (ref_field).
assign lt_ref->* to <startdate>.
assign (ref_field) to <startdate>. "- raises type error
move 'I' to selection-sign.
move 'BT' to selection-option.
move '20070401' to selection-low.
move '20070430' to selection-high.
append selection to <startdate>.

Hi,
I tried the following which appends <startdate> with the new entry but the underlying referenced table SP$00005 is still not updated.
Any ideas?
Thanks,
Alan
field-symbols: <startdate> type any table,
                 <l_line> type any,
                 <l_field> type any.
data: ref_field(8) type c.
types: begin of sp$00005, "type definition required for syntax check
           sign(1),
           option(2),
           low type d,
           high type d,
         end of sp$00005.
data: lt_ref type ref to data.
ranges: selection for sy-datum.
data: new_line type ref to data.
ref_field = 'SP$00005'.
create data lt_ref type table of (ref_field).
assign lt_ref->* to <startdate>.
create data new_line like line of <startdate>.
assign new_line->* to <l_line>.
if <l_line> is assigned.
move values using assing stt.
endif .
move 'I' to selection-sign.
move 'BT' to selection-option.
move '20070401' to selection-low.
move '20070430' to selection-high.
assign selection to <l_line>.
insert <l_line> into table <startdate>.

Modify the structure of internal table which created dynamically!!!

HI All,
I am creating internal table dynamically using the below syntax. Now I need to remove few of the fields from the internal table structure. Could you please help me how to go ahead in these cases?
* Create table dynamically for local data
CREATE DATA gv_table_l TYPE TABLE OF (<fs_tabname>).
CREATE DATA gv_wa_l    TYPE (<fs_tabname>).
ASSIGN gv_table_l->*   TO <fs_local_tab>.
ASSIGN gv_wa_l->*      TO <fs_local_wa
>.
Please let me know if you have any thoughts.
Thanks,
Raghu.

Hi ,
check this wiki
[Internal Table|http://wiki.sdn.sap.com/wiki/display/Snippets/Howtocreateinternaltable+dynamically]
in your case ...
1.Get filed list based on the type ...make use of "cl_abap_datadescr=>describe_by_type('MARA'), check for syntax or sample programs...
2.Delete fields which you dont want to be in your internal table....
3.Create internal table using method " CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE" ref attached link for sample code by Pinaki...
regards
Prabhu

Whats SAP internal table which populate data in reuest tab of manags of DSO

Similar Messages

Maybe you are looking for