TABLES ARE NOT FOUND

hI,
I WANT TO KNOW WHY AFTER I RUN THE SYSMGMT1 SCRIPT, I STILL CANNOT SEE THE APPLICATIONS, HOSTS AND DATABASES TABLES IN THE OBJECT BROWSER PAGE. iM USING ORACLE DATABASE 10G EXPRESS EDITION. IT SAID IN THE BOOK THAT AFTER I RUN THE SCRIPT I SUPPOSED TO SEE THE TABLES OF APPLICATIONS, DATABASES AND HOSTS. THERES NOTHING I CAN SEE. WHAT DID I DO WRONG? PLS. HELP ME.
LEN

perhaps this would be better asked there. ...and with the caps lock key turned off
;-)

Similar Messages

Loaded dump from 12.5.4 to 15.7, Error 622 & Tables/Views not found

Hi all,
I am getting desperate trying to fix that issue. I had to import a dump from an ASE 12.5.4 into a new database on an ASE 15.7. I therefore enabled the compatibility mode server-wide and then proceeded to the load which seems to have performed correctly. The database seems well imported, and I can access most of the tables/views/procedures (from my C# application), but a procedure is giving me troubles.
I am getting this error while executing a given procedure :
Error: 622, Severity: 20, State: 1
Opentable was passed a varno of 52. Object 'temp worktable' in database 'tempdb' already has that session descriptor in use. This occured while opening object id -1245236 in database id 2.
I realised this was caused by a view which is used in this procedure but which is weird is that the error is not thrown when running the SQL code itself, out of the procedure context.
I am using Toad for Sybase as a client, and realised I cannot access the data tab of the concerned view, Toad gives me the same error. So I cannot execute this view while it performs without any trouble on the original server (production server which runs ASE 12.5.4).
I also realised, when trying to execute some pieces of the query individually that I get warnings about unfound tables (and that I should use sp_help to fix the problem). Although, the tables actually exists and I can access their data.
I have tried so many things and still cannot fix this problem. I've used 'upgrade_object', 'sp_recompile' on all tables, 'dbcc reindex' on all tables.
Would you have any idea where the problem could come from? Thank you very much

Thank you for your reply.
Good to know that enabling compatibility mode before or after loading the load doesn't have any effect.
I didn't drop/recreate all the SP and views but I can tell you I recreated a similar view and it causes the same issue.
I had a look at your link yes. I have run 'dbcc upgrade_object' several times already, on the view and the procedures calling the view, and it won't solve anything.
I've seen a similar post about the problem I have when executing the code itself of the view in a "normal" adhoc query (errors saying the tables are not found) : SAP Sybase Forums - ASE - Backup and Recovery - PRoblem after restore - Object does not exist.
Could it be the same problem for me?
Although I've tried splitting the SQL query and executing the parts individually and it works without any trouble. Problem is when the 2 parts of the view are put together. It may be something that was possible with ASE 12.5.4 but not with 15.7 and that compatiblity mode doesn't solve. My view consists of an union a two selects where both have left joins, case when then else, not in and a final group by (adding an order by doesn't help, as I tried).
PS : I don't have access to the production server where the dump is actually from (but I could if it is really necessary)

Tables are not coming to oracle model from sqlserver 2000 while using OMWB

Hi,
I am using oracle migration workbench to migrate SQL Server 2000 to oracle 9i. When �capture source database and create the oracle model� is run. only tablespace and users coming to Oracle model from sql server. Table are not coming. These table are owned by dbo in sql server and
All other users in the database has full privilege on this tables. Do I need to some setup to get this tables
In oracle model.
Thanks
Harish

Try the following
|| This script sets the "dbo" to have the "sa" login.
|| NOTE: Server settings for the SQL Server instance must be set to
||"Allow modifications to be made directly to the system catalogs".
|| This is found under Server Setttings tab for server properties.
UPDATE sysusers
SET sid = (SELECT sid FROM master..sysxlogins WHERE name = 'sa')
WHERE name = 'dbo'

External Table error: KUP-04043: table column not found in external source

I am trying to get the syntaxc correct for an external table.
I keep getting this error:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SITE
29913. 00000 - "error in executing %s callout"
*Cause: The execution of the specified callout caused an error.
*Action: Examine the error messages take appropriate action.
Data looks like: (some of one of many files, where the character field widths are variable)
ZZ,ANYOLDDATA,77777,25002000,201103,12,555.555,11.222
ZZ,ANYOLDDATA,77777,25002300,201103,34,602.162,8.777
ZZ,ANYOLDDATA,77777,25002400,201103,12,319.127,9.666
ZZ,OTHERDATA,77121,55069600,201103,34,25.544,1.332
ZZ,OTHERDATAS,77122,55069600,201103,22, 1.011,0.293
External table def I have:
CREATE TABLE MY_INPUT (
FIRST_CODE VARCHAR2(10),
SECOND_CODE VARCHAR2(20),
MY_NUMBER VARCHAR2(20),
THIRD_CODE VARCHAR2(20),
YEARMO VARCHAR2(6),
N NUMBER,
MEAN NUMBER,
SD NUMBER
ORGANIZATION EXTERNAL (
TYPE ORACLE_LOADER
DEFAULT DIRECTORY INPUT_DIR
ACCESS PARAMETERS (
RECORDS DELIMITED BY newline
BADFILE INPUT_LOGDIR:'bad.bad'
LOGFILE INPUT_LOGDIR:'log.log'
DISCARDFILE INPUT_LOGDIR:'discards.log'
fields terminated by ',' LRTRIM
MISSING FIELD VALUES ARE NULL
REJECT ROWS WITH ALL NULL FIELDS
( THIRD_CODE,N,MEAN,SD) )
LOCATION ( 'myfile.rpt')
NOPARALLEL
REJECT LIMIT UNLIMITED;
I have the directories INPUT_DIR and INPUT_LOGDIR defined, and read/write access granted to the user who creates the table and tried to query from it.
I have tried various combinations of VARCHAR2 lengths and NUMBER vs VARCHAR2 for some of the numeric fields.
I am not getting any Bad, Log or Discard files.
I can do a GET from the SQL prompt, and see the data:
SQL> GET 'C:\temp\input_dir'myfile.rpt'
and I see the data.
Windows 7
Oracle 11.2
I am not positive of the newline record delimiter - these files are generated by an automated system. Probably generated on a UNIX machine.
Any suggestions on what to try would be helpful.
KUP-04043 error message says to check the syntax .. .I am running out of thigns to check.
Thank you - Karen

And the get ( I created the sanitized file, so we have a real working, failing, santiized example):
SQL> get c:\Inputfiles\myfile.rpt
1 ZZ,ANYOLDDATA,77777,25002000,201103,12,555.555,11.222
2 ZZ,ANYOLDDATA,77777,25002300,201103,34,602.162,8.777
3 ZZ,ANYOLDDATA,77777,25002400,201103,12,319.127,9.666
4 ZZ,OTHERDATA,77121,55069600,201103,34,25.544,1.332
5* ZZ,OTHERDATAS,77122,55069600,201103,22, 1.011,0.293
So the full series is:
CREATE DIRECTORY INPUT_DIR AS 'C:\InputFiles';
-- grant READ and WRITE
GRANT READ ON DIRECTORY INPUT_DIR TO ILQC;
GRANT WRITE ON DIRECTORY INPUT_DIR TO ILQC;
-- As SYS, create the bad/log/discard directory:
CREATE DIRECTORY LOGDIR AS 'C:\InputFiles\Logs';
-- grant READ and WRITE
GRANT READ ON DIRECTORY LOGDIR TO ILQC;
GRANT WRITE ON DIRECTORY LOGDIR TO ILQC;
CREATE TABLE MY_INPUT (
FIRST_CODE VARCHAR2(10),
SECOND_CODE VARCHAR2(20),
MY_NUMBER VARCHAR2(20),
THIRD_CODE VARCHAR2(20),
YEARMO VARCHAR2(6),
N NUMBER,
MEAN NUMBER,
SD NUMBER
ORGANIZATION EXTERNAL (
TYPE ORACLE_LOADER
DEFAULT DIRECTORY INPUT_DIR
ACCESS PARAMETERS (
RECORDS DELIMITED BY newline
BADFILE INPUT_LOGDIR:'bad.bad'
LOGFILE INPUT_LOGDIR:'log.log'
DISCARDFILE INPUT_LOGDIR:'discards.log'
fields terminated by ',' LRTRIM
MISSING FIELD VALUES ARE NULL
REJECT ROWS WITH ALL NULL FIELDS
( THIRD_CODE,N,MEAN,SD) )
LOCATION ( 'myfile.rpt')
NOPARALLEL
REJECT LIMIT UNLIMITED;
SELECT * FROM my_input;
and GET is as above.

Table Driver Not Found message during initial boot up - What is this?

Every since upgrading to 10,5 when I boot or change accounts I get the message, "Table Driver Not Found". I am not sure what program this is but there is what looks like the letter A and an art stand? I press ok and never see it again unless I log off or reboot.
Any clue?

Did you mean "Tablet Driver Not Found"... oh you did in the title!
So, did you ever have a Wacom Tablet or anything installed before?
Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

All values in internal table are not displaing in the script print program

Hi,
I am calling the script program.In main window all values in the internal table are not displaying. I wrote
write-form statement in loop. But not all the values are getting displayed. Only thel ast values getting dispalyed.
*& Report ZSCRIPT_116719
REPORT ZSCRIPT_116719.
************Table decleration***************
TABLES: mara, mbew, makt.
loop at i_makt into wa_makt.
endloop.
loop at i_MARA into wa_mara.
endloop.
LOOP AT I_MBEW INTO WA_MBEW.
ENDLOOP.
lv_price = 0.
********************Total Price******************
LOOP AT i_mbew INTO wa_mbew.
    lv_price = lv_price + wa_mbew-stprs.
ENDLOOP.
end-of-selection.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION                       = 'TX'
ARCHIVE_INDEX                     =
ARCHIVE_PARAMS                    =
DEVICE                            = 'PRINTER'
DIALOG                            = 'X'
   FORM                              = 'ZSCRIPT_719'
   LANGUAGE                          = SY-LANGU
OPTIONS                           =
MAIL_SENDER                       =
MAIL_RECIPIENT                    =
MAIL_APPL_OBJECT                  =
RAW_DATA_INTERFACE                = '*'
SPONUMIV                          =
IMPORTING
LANGUAGE                          =
NEW_ARCHIVE_PARAMS                =
RESULT                            =
EXCEPTIONS
   CANCELED                          = 1
   DEVICE                            = 2
   FORM                              = 3
   OPTIONS                           = 4
   UNCLOSED                          = 5
   MAIL_OPTIONS                      = 6
   ARCHIVE_ERROR                     = 7
   INVALID_FAX_NUMBER                = 8
   MORE_PARAMS_NEEDED_IN_BATCH       = 9
   SPOOL_ERROR                       = 10
   CODEPAGE                          = 11
   OTHERS                            = 12
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'START_FORM'
EXPORTING
ARCHIVE_INDEX          =
   FORM                   = 'ZSCRIPT_719'
   LANGUAGE               = SY-LANGU
STARTPAGE              = ' '
   PROGRAM                = 'ZSCRIPT_116719'
MAIL_APPL_OBJECT       =
IMPORTING
LANGUAGE               =
EXCEPTIONS
FORM                   = 1
FORMAT                 = 2
UNENDED                = 3
UNOPENED               = 4
UNUSED                 = 5
SPOOL_ERROR            = 6
CODEPAGE               = 7
OTHERS                 = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*LOOP AT I_MBEW INTO WA_MBEW.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
   ELEMENT                        = 'DATA'
   FUNCTION                       = 'SET'
   TYPE                           = 'BODY'
   WINDOW                         = 'MAIN'
IMPORTING
PENDING_LINES                  =
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*ENDLOOP.
If I give only one value it is showing the output. When I am fetching the data for range of values it i sshowing start_form is not there.
Plz let me know how to get the aa internal table values to be displayed

hi
I shortened your program a bit. So we can go to essentials of your question.
You said you put in it in a loop.
What i see in your prog is:
REPORT zscript_116719.
************table decleration***************
TABLES: mara, mbew, makt.
LOOP AT i_makt INTO wa_makt.
ENDLOOP.
LOOP AT i_mara INTO wa_mara.
ENDLOOP.
LOOP AT i_mbew INTO wa_mbew.
ENDLOOP.
lv_price = 0.
********************total price******************
LOOP AT i_mbew INTO wa_mbew.
lv_price = lv_price + wa_mbew-stprs.
ENDLOOP.
END-OF-SELECTION.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      form     = 'ZSCRIPT_719'
      language = sy-langu.
CALL FUNCTION 'START_FORM'
    EXPORTING
      form     = 'ZSCRIPT_719'
      language = sy-langu
      program = 'ZSCRIPT_116719'.
*LOOP AT I_MBEW INTO WA_MBEW.
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      element = 'DATA'
      function = 'SET'
      type     = 'BODY'
      window   = 'MAIN'.
*endloop.
1. Your loop is not a loop with this '*' in front of it.
2. Are you printing &wa_mbew-???& variables in your sap-script
3. is itab I_MBEW properly filled
Let me know.
Gr. Frank

File-to-rfc ..database tables are not updating??

hi xi friends..
in my file -to-rfc scenario.. without BPM ..
in sxmb_moni..it is showing successfull.. database tables in sap not updating..
my source structure..
workorders 1..1
..order 1..unbounded
...id
...operation 1..unbounded
.....id
.....closingdate
.....status
.....comment
my target is Zbapi_alm_conf_create..
Zbapi_alm_conf_create
...Zdetail_return 1..1
.....item 0..unbounded
...Ztimetickets
.....item 0..unbounded
.......orderid
.......operation
.......fin_conf
.......con_text
.......exec_fin_date
in message mapping:
MM_file_to_zrfc
i changed the occurance of target to unbounded..
message mapping like this..
my source structure..
workorders 1..1
..order 1..unbounded   --------->Zrfc 0..unbouned
...id                  --------->Ztimetickets-item-order
...operation 1..unbounded ------>Ztimetickets-item 0..unbounded
.....id                ---------->Ztimeticktes-item-operation
.....closingdate       ----------->Ztimeticktes-item-exec_fin_date
.....status            ----------->Ztimetickets-item-fin_conf
.....comment           ------------>Ztimeticktes-item-conf_text
and also in interfacemapping ,changed the target occurance to unbounded.
and in ID ,interface determination using enhanced i selected interface mapping with occurance unbounded..
in sxmb_moni it is showing success..
in adapter monetering( receiver).
<i>Receiver channel 'cc_sap_work' for party '', service 'SAP_ERP__DEV' (internal name 'RfcClient[cc_sap_work]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=aar, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=thotv, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Current pool size: 0, maximum pool size : 1
Channel History
- OK: 2006-12-31 14:19:47 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE
- OK: 2006-12-31 14:18:50 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE</i>
but the database tables are not updating..if i execute ZBAPI_ALM_CONF_CREATE manually in SAP ..tables are updating...
please guide me...
thanks in advance...
regards
Ram

Hi..
my mappis is like this..
message                   message
.message1                         message1
..workorders 1..1
..order 1..unbounded   -
>Zrfc 0..unbouned
...id                  -
>Ztimetickets-item-order
...operation 1..unbounded -
>Ztimetickets-item 0..unbounded
.....id                -
>Ztimeticktes-item-operation
.....closingdate       -
>Ztimeticktes-item-exec_fin_date
.....status            -
>Ztimetickets-item-fin_conf
.....comment           -
>Ztimeticktes-item-conf_text
i didnt mapped message at root..is this necessary to mapp messages??
please tell me
regards
ram

When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version? (mostly Helvetica) where and how do I get those Fonts? And/or, can I use the Mac version of these Fonts?

When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version? (mostly Helvetica) where and how do I get those Fonts? And/or, can I use the Mac version of these Fonts?
Thanks, Rich

In order to be cross platform you must be using the Open Type version of all fonts to cause the least disruption. Macs can read and process the Windows .ttf type format but PCs can't process Mac formatted type. Most recent versions also cannot use the older PS Type 1 fonts.

I just bought and downloaded an album. the album/tracks are NOT found in my music listing alongside every other track i have purchased! however, they are found and playable in the recently added playlist. plz help

i just bought and downloaded an album. the album/tracks are NOT found in my music library alongside every other track i have purchased! however, they are found and playable in the recently added playlist. in addition, when using the search queue in the upper right corner, the artist and album is listed when searched for, but when clicked on, nothung happens. i have downloaded hundreds of tracks with no issue (not a noob), but have no idea what has occurred...plz help

Have you checked whether the songs are in your iTunes library? If they are, then just drag them to your purchased playlist. If they aren't, try checking for available downloads.
If none of the previous work, then get in contact directly with iTunes store support to tell them about your problem.

Catalog objects are not found sometimes.

Sometimes we hit an error that our catalog objects are not found. We find that the relevant column views in the schema _SYS_BIC are missing. So it should be the root cause. But we don't know why these views are removed. Could you give us some explanation?
Thanks,
Li

Hi Li,
I think maybe they are deleted by someone manually.
BR,
Phoebe

I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?

I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?

what happened to the initially downloaded files ? did you make a backup ? do you use time machine ?

In HDBC Table are not shown as replicated.

Hi ALL ,
I replicated some tables in ECC .
In LTRC its showing me the tables are replicated .
But In HDBC Table are not shown as replicated.
Can you please help me with this.
Regards,
Abhishek

Hello Abhishek,
Are you sure you're using the same DB connection for LTR and HDBC?
Best regards,
Ralph

TS1424 I'm having a hardtime syncing my new ipod shuffle, get a message that says my songs are not found

I'm having a difficult time transfering my songs to my new ipod shuffle 4th generation. A message says that my songs are not found. Any help would be greatly appreciated. Thanks.

Not sure what procedure you are using, but you should do it this way...
First, if the sidebar (along left side of iTunes window) is not visible, from the iTunes menu bar, under View, select Show Sidebar.
In the sidebar, find and select the shuffle under DEVICES. There is a bar with buttons toward the top, starting with Summary. Click on Music next to Summary. This is the shuffle's Music screen, where you tell iTunes how to sync songs to the shuffle.
Check the box for Sync Music. Choose the option to sync Selected playlists, artists, albums, and genres. Under Playlists, find and checkmark that 12-song playlist. Click Apply.
Going forward, you can update that playlist (add/remove songs) in your iTunes library. The next time you connect the shuffle (or click Sync if already connected), iTunes automatically updates the shuffle with the same changes.

XML File as Datasource - The table is not found in file

Hi,
I am trying to use a xml file as datasource and want to map those columns to the existing DWH. Actually, it is additional data which should be combined with the existing DWH data. Therefore I am using the fragmentation option.
I did it already on my privat pc and it works, but as soon as I implement it to the DEV environment it doesn' t work at all :( I am getting the following error:
Status: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 64002] The table is not found in file C:\Ist.xml loaded. (HY000)
Could somebody help me??
Thanks

If you changed environments make sure that the XML file actually exists in the location specified at C:\ist.xml.
Also be sure that the information in the properties section of the XML data source match your DEV environment. If you used any session variables be sure that you have also modified those in the DEV environment to reflect the DEV environment.
Did you switch from a same OS environment, i.e.: Linux to Linux or Windows to Windows? Or did you go from a Windows to Linux OS?

Excise Tables are not updating

Hi,
I have a issue in Depot sale. I created a GR against a PO. Then I posted a Excise invoice. But the excise tables are not updating.
Why it so? Plz explain.......
Thanks & Regards
Saeed

Hi,
While doing the GR through T Code MIGO ( Good Receipt + Purchase Order) > Tick on "Item Ok" & Enter > and see one more additional menu will appear > Excise Invoice >Is there two options 1) No Excise Entry 2) Create RG23D Entry.
If you need to update Excise detail through MIGO you can select "Create RG23D Entry" or if you not require to update Excise entry through MIGO you can select "No Excise Entry" & after generating the GR document you can proceed for Excise updation through T Code J1IG.
Hope that you are understood.
Thanks & Regds,
Rajesh Kolhe

TABLES ARE NOT FOUND

Similar Messages

Maybe you are looking for