Tables Changes in Migration from 8.0.6.3 to 9i

Where can I find documentation describing the differences in the Oracle database changes (e.g., table name, field, structure changes) between database 8.0.6.3 and 9i? We're upgrading to 9i/11i from 8.0/11.0 and have many customer reports and forms we need to check for changes.

Hi Prashant,
Export dump files can be imported into all future releases of Oracle.
Refer to this doc for more info on migration : http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/server.920/a96530/expimp.htm#1005557
Hope this helps.
Sujatha
http://otn.oracle.com/sample_code/content.html

Similar Messages

SAP extract to Excel changed after migration from ECC5 to ECC6

Hi everyone,
This issue is about getting a proper table when displaying SAP reports in Excel. When extracting to Excel, the data base is presented with summary yellow lines whereas we would rather have a regular table without subtotal. This issue appeared when the system was migrated from ECC5 to ECC6. Please notice that one of the user has currently a proper display. Do you know which parameter shall we change?
Thanks!
Stan B.

There are some default setting in the parameters,
Like
RPO0 - User Settings
From FI transactions you can change ti your default settings
Have a look to:
FIT_ALVC X FI Line Items: ALV Grid Control
With KSB1 I see it direct without sub totals and saving.
Click on spreatsheet
Select All Available formats
Select EXCEL (In Existing XXL Format)

NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g

NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
But after applying the above the above patch we are still getting the same error.
but in the above patch instructions file - Post deployment instructions to create the Variable
Post Install Instructions:
- To revert to the 10g navigator behavior for handling conforming dimensions,
you must set the following session variable via an init block in the RPD:
NO_FORCE_TO_DETAIL_BIN=1
The default value for the above variable is 0.
- Restart all servers (Admin Server and all Managed Server(s))
but we didn’t find the process to create the specified variable and Initialization block in the RPD
Can you please suggest us how to go further.
Our questions are:

Hi
Refer the below thread.
obiee 11g non-conforming dimensions and nQSError 14025
Might be help you/
Thanks,
satya

Server side script changes while migrate from FMS3.5 to FMS4.5

hi,
Someone has any tutorial or document link when migrate from FMS 3.5 to Fms 4.5.
thanks in advance,
vishal

If you are talking about Server-side script - your server-side script should work as it - if its working in 3.5 it should work without any changes in 4.5

Please confirm wheather the tables changed or obsoleted from 11i to R12.

All,
Can you please let me know whether the following tables are replaced/obsoleted and such information from 11i to R12 as part of upgrade.Please let me know if you need any further information.
Just want to know ,the following tables are changed from 11i to R12,if yes what has changes & what has replaced with.
General Ledger (GL)
GL_PERIODS
GL_BUDGETS
GL_PERIOD_STATUSES
GL_BALANCES
GL_BUDGET_VERSIONS
GL_CODE_COMBINATIONS
GL_BALANCES
GL_JE_CATEGORIES_TL
GL_JE_SOURCES_TL
GL_JE_BATCHES
GL_JE_HEADERS
GL_JE_LINES
Accounts Payable (AP)
AP_TERMS_TL
AP_CHECKS_ALL
AP_INVOICES_ALL
AP_BATCHES_ALL
AP_HOLDS_ALL
AP_PAYMENT_SCHEDULES_ALL
AP_SYSTEM_PARAMETERS_ALL
AP_LOOKUP_CODES
AP_INVOICE_DISTRIBUTIONS_ALL
AP_INVOICE_PAYMENTS_ALL
Fixed Assets (FA)
FA_BOOKS
FA_ADDITIONS_TL
FA_ADDITIONS_B
FA_ASSET_HISTORY
FA_CATEGORIES_B
FA_CATEGORIES_TL
FA_CATEGORY_BOOKS
FA_CATEGORY_BOOK_DEFAULTS
FA_DISTRIBUTION_HISTORY
FA_DEPRN_DETAIL
FA_DEPRN_PERIODS
FA_RETIREMENTS
FA_LOCATIONS
FA_ASSET_INVOICES
FA_RETIREMENTS
FA_TRANSACTION_HEADERS
FA_CALENDAR_PERIODS
Purchasing (PO)
PO_DISTRIBUTIONS_ALL
PO_LINE_LOCATIONS_ALL
PO_NOTIFICATION_CONTROLS
PO_ACTION_HISTORY
PO_LINE_TYPES_TL
PO_HAZARD_CLASSES_B
Thanks a lot in advance.

Please see your other thread -- 11i to R12 Tables/Views Replacement or obsoleted.

Exchange server name not changing in mail profile after migration from 2010 to 2013

Following a migration from 2010 to 2013 we are finding that for a number of users the old exchange server address stays in the mail profile (control panel -> mail -> e-mail accounts) which causes Outlook not to load.
We are able to go into control panel -> mail -> e-mail accounts and change this manually to the new exchange 2013 server address but we have quite a number of users and don't really want to do it manually.
Shouldn't it be updating automatically and if so why is it?

Hi,
Yes, it should be changed by autodiscover. Does this issue occur to all the migrated users?
I have seen this kind of issues before when migrating from Exchange 2003/2007 to Exchange 2010. The most efficient way is to rebuild the Outlook profile.
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Migration from sql server 2005 tables to oracle tables.

Hi,
Kindly give the steps to migrate from sql server 2005 tables to oracle tables.
Kindly advise
Oracle database version:
Oracle Database 10g Release 10.2.0.1.0 - Production
PL/SQL Release 10.2.0.1.0 - Production
"CORE 10.2.0.1.0 Production"
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Edited by: 873127 on Jul 18, 2011 9:46 PM

Are you migrating or taking continual updates?
If migrating it might be worth considering The SQLDeveloper Migration Workbench (which moves more than just data)..
http://www.oracle.com/technetwork/database/migration/sqldevmigrationworkbench-132899.pdf
Cheers
David

After Migrating from Sharpoint 2010 to Sharepoint 2013 list filter options changed

Hi All,
After migrating from SP 2010 to SP2013 i found list View filter option is changed and filter is not working Pls help its really urgent.... you can check field 1 and field 2 in following screen shot.
Prasad kambar

Hi ,
According to your description, my understanding is that your list filter cannot work after Migrating from SharePoint 2010 to SharePoint 2013.
For your issue, please check your log files for any issues. Also you can refer to the blogs for troubleshooting SharePoint 2013 migration:
Firstly try running Test-SPContentDatabase on your source database for any issues -
Test-SPContentDatabase - http://technet.microsoft.com/en-us/library/ff607941.aspx
Troubleshoot site collection upgrade issues in SharePoint 2013 http://technet.microsoft.com/en-us/library/jj219648.aspx
Verify database upgrades in SharePoint 2013 -http://technet.microsoft.com/en-us/library/cc424972.aspx
And please have a look at your custom solution on your site.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Transaction/program to change AVAILABLEFLAG parameter from table UJ0_PARAM_APP

Hi Experts,
Do you know if is there a transaction/program to change BPC environment status (for example, a transaction/program that changes AVAILABLEFLAG parameter from table UJ0_PARAM_APP to "0" or "1").
Regards,
Danilo

Hi Danilo,
i'm trying to use the same method as you in BPC 7.5.
Did the method worked for you to set offline and online the application?
Could you please tell me how you used it?
Thanks.
Amine

Table structure changes when using 'create table X as ( select * from X@remote_server )'

I need to create and copy data from a remote Oracle server to a local server. The command I use is
create table X as ( select * from X@remote_server )
with remote_server is the tns name of the remote Oracle server.
The local table is created and populated with data as expected but when I check the structure using 'desc X' it shows me all the CHAR fields of the local table are triple as large as of the remote table.
I guess the problem is the difference between the NLS_CHARACTERSET settings . The local charset is AL32UTF8 and the remote is WE8MSWIN1252.
How do I change the command to make the two tables have the same field sizes ?
Thanks,
Vu

Do you want to be able to store all the data from the remote table in the local table? Assuming you do, increasing the size of the column would be the correct behavior.
By default, a VARCHAR2(10) allocates up to 10 bytes of storage. In the Windows-1252 character set on the source, 1 character requires 1 byte of storage. So a VARCHAR2(10) has space for up to 10 characters. In the UTF-8 character set on the destination, however, 1 character can require up to 3 bytes of storage. So a VARCHAR2(10) may allow you to store as few as 3 characters. Since Oracle has no way of knowing what data you have (and will have) in the source system, it triples the size to ensure that all the data from the remote system will fit in the new table. If you want the columns to be the same size on the destination that they are on the source, it is highly probable that you'll get errors inserting the data because at least one value will be too large for the destination column.
Justin

Migrate tables and stored proc from SQLServer 2005 Express to Oracle10G

How to migrate tables and stored procedures from SQLServer 2005 Express to Oracle10G using SQLDeveloper? thank you very much

Using Oracle SQL Developer Migration Workbench
http://www.oracle.com/technology/tech/migration/workbench/index_sqldev_omwb.html

Migrating from server 2003R2 to 2008R2 User cannot change password box unchecks after being checked.

After Migrating the domain controller from server 2003 R2 to 2008 R2 the check box for users cannot change password wont stay checked. This is happening to ALL users and no they are not a member of any Protected Groups. I have searched for a solution
for months but cant not find.
And now after migrating the exchange 2003 to 2010 I have to keep applying the inherited permissions every hour until a user finally makes an active sync.
Now having more AD issues, cant remove users from Exchange 2010...And again have to go to the DC and applying the inherited permissions, then I can remove the user.
I really need help with this...
John

Hi,
Did you use the migration tools to do the user migration?
Permissions on a user that is migrated from an Active Directory domain are reset to default values during migration.
I think this is by design:
http://technet.microsoft.com/en-us/library/cc974359(v=ws.10).aspx
Regards.
Vivian Wang

Changes in webservices while migrating from Oracle App Server to WebLogic

Dear All,
I am developing webservices for a external users.
I am new to webservices.
We were using Oracle Application server to deploy the webservices.
The architecture was as mentioned below
1) A interface class
2) A Implementation class for the above interface class
Now we are planning to migrate from Oracle application server to Weblogic Application server.
I have few doubts about the migration,
1) Will there be any difference between Oracle specific WSDL and WSDL created by Weblogic ant build command
2) As our external parties are referring our SOAP requests ans responses for their implementation, i am concerned about the changes in the SOAP request and response formats. Will there be changes due to application server change?
Oracle app server - Oracle 10g application server version 9.0.4.0
Weblogic appl server - Weblogic application server version 10.3.0.0

Now after creating the WSDL by Weblogic workshop. The previous request XML is not working.
Can someone help soving the below query.
We are in process of upgrading the Oracle 10g application server version 9.0.4.0 to Weblogic application server version 10.3.0.0. In the old application server we were using axis specific jars to create the WSDL for the webservices. There are so many third party applications which are accessing our webservices, so we can not change the wsdl, clients accessiong the webservices and the corresponding formats of request and response xml messages. So we need to deploy the same wsdl and for the same we need to deploy axis on to weblogic 10.3. Can you please help us regarding the same.
Qns
1 - If we can deploy the axis on to the Weblogic 10.3
2 - Can we use the same WSDL in the Weblogic server too.
3 - If we use the same WSDL, will it help us to keep the client accessing the webservices, the request xml format, response XML format the same as it is with Oracle 10g application server case.
4 - Please share how to deploy axis on to the Weblogic 10.3 application server.
5 - Please share how we can create EARs that can be deployed on the webserver using axis specific jars.
Thanks and Regards
Manoj

How to migrate changed Business Scenarios from Template Project to Solution

SAP Solution Manager - How to migrate changes in Business Scenarios from Template Project to Solution?
Our Global ASAP strategy is based upon a Template Project, Implementation Project, Maintenance Project and Solution with Business Scenarios.
Changes in the Template Project for existing and new Business Sceanarios, etc. are correctly executed. Up till now we have successfully implemented our Template Project and secondly extended our Business Scenarios from 4 to 14. Our 3rd upcoming change will be changes on Business Scenarios as well. These planned changes for the Business Scenarios need to be consistent, possibly without manual intervention.
During a Proof of Concept (PoC) in our Sandbox (SXB) we have identified a possible serious problem when trying to publish these changes in Business Scenarios in the Template Project to the Solution. SAP Solution Manager (SSM) does not seem to support a scenario where Business Scenarios in the Solution can be refreshed or updated with changed Business Scenarios in the Template Project.
We have identified 2 possibillities:
1.     Manual project upgrade
1.1.     Synchronize the changes for the Template Project normally;
1.2.     Delete the changed Business Scenarios from step 1.1 in the Solution;
1.3.     Add the changed Business Scenarios from step 1.1 into the Solution.
For this scenario we foresee a big problem because all Content and Issues connected to the old Solution Business Scenarios loose their coupling with the Solution.
For the Content this may not be a real problem because the Content is also available in the Template Project.
However the Issues are loosely coupled to the Solution Scenarios and therefore need to be coupled manually to these processes.
2.     Manual changes using Maintenance Project
2.1.     Synchronize the changes for the Template Project normally;
2.2.     Publish all changes from step 2.1 in the Template Project
2.3.     Add all new Content from step 2.1 to the structure of the Maintenance Project;
2.4.     Relocate Content and Issues when the Business Scenario has been relocated.
Because SSM does not support this activity we need to delete this Business Scenario first and secondly re-create it again on the correct spot.
Our question: How has SAP done this in other customer projects?
We need to have a working solution by the end of March, 2009.
Best regards,
Peter Hendriksen

Peter,
Did you get an anwer to this question from SAP?
Rgds,
Eamonn.

How to find tables changed from one table authorization group to other.

Hi Experts,
We have a issue where certain tables have been moved from one Authorizaiton group to the othe table authorization group.
We want to find all tables previous authorization group.
Is there any wayt we could find the old authorization group.
(for example)
Consider a scenario where a table agr_1251 was moved to the new auth group ZAUTH.
I wanted to find which auth group was holding the table agr_1251 previously.
Can you please help me on this request?
Thanks.

One more way is to check TR (Table E070, E071). But you need to find the details for table (Like for role it is R3TR, ACGR).
Regards,
Arpan Paik

Tables Changes in Migration from 8.0.6.3 to 9i

Similar Messages

Maybe you are looking for