Tables or Views to get the data

Hi,
I am new to OLM and need some help in identifying the tables for gathering information and sending email notifications.
From which table can I get the email ids of all the customers who registered in a class. As there can be multiple classes so how do I group the email ids of each class
From which table can I get the email ids of all the customers who are in a waitlist for a specific class.As there can be multiple classes so how do I group the email ids of each class
From which table can I find out the class date i.e. when a class is suppose to start.As there can be multiple classes so how do I group the email ids of each class
How to find out a first customer in waitlist when a max attendees have increased or whenever a space becomes available. As there can be multiple classes so how do I group the email ids of each class
Any help is appeciated.
Thanks

You can use the eTRMs to get this information.
Follow this link https://etrm.oracle.com/pls/trm11510/etrm_fndnav.ls_apps or search for eTRM in Metalink (you'll need a Metalink login to access the eTRMs).
Go to the FND tab and choose the product OTA - Learning Management. This will give a list of all the relevant tables. OTA_EVENTS and OTA_DELEGATE_BOOKINGS would be a good place to start.
Hope this helps,
Kim

Similar Messages

Extracting data from Legacy system - How do we get the data into a normaliz

Hi All,
Requirement that I have now is to get the data from 6 different tables ORACLE database to BI using DB Connect, where in each of those 6 tables has the transactional data as well - If it is only 2 tables, would have been creating a view and get the data. Each of the 6 tables are linked to one other by the Primary Key and Foreign key relation ship.
If it is from ERP system we would have created a Functional Module.
Please advice me on how to get the data to BI end from those tables in Legacy system.
Thanks in advance.

Anil:
I recommend following Ralph Kimball's EDW data modeling principles.
Have a staging layer of DSO's with data dump from source system. So have 6 different DSO's extracting data from 6 tables from source system independently.
Then have an integeration layer of DSO's depending on requirement. You could combine data from 2 or more DSO's here based on requirement and integrate your data here. Use primary key foreign key relationships here to do look ups or direct loads to do your business logic.
Then have an analytical layer of InfoCubes, MultiProviders, InfoSets as required.
The 3 layered architecture is a standard best practice that i have seen followed in many organizations. You could search for this type of architecture online under EDW (Enterprise Data Warehouse). There should be plenty of information available.
Good Luck.
MP.

How to get the data in Charts

HI Guys,
In the BEX reports for the rows used the date and in the columns i have created a structue using the selections based on the KF. i have used the 29 KF in the structure. My problem i want to dispaly the data by spliting the key figures from 1-15 and 16-29 in the WAD for the tables and graphs
i did the settings for the tables as followed and getting the data correctly
Display data from value column = 1
Display data to value column = 15.
i want to apply the same settings for the graph.
Please help me where i need to do the settings for the series(legends).
Thanks,
Visu
Edited by: visu rao on Apr 9, 2008 5:45 PM

Hi Visu,
In Chart, you cannot have such option. You should have two same queries as such with 1 to 15 KF's in one query and 16 to 29 KF's (with structures) in second query with all other similar fields. Now use these two queries in two different charts with 15 categories in first chart and the other 14 categories in second chart. You can have the categories what ever you want... U just need to maintain in the query in the structure, the number of KF's... and the same number of categories in chart.
You can have the categories and series count in "Edit chart-->Wizard and Chart designer".
Assign points if this helps u...
Regards,
KK.

How to get the data from a cluster table to BW

Dear All,
I want to extract the data from R/3 to BW by using 2 tables and one Cluster B2.
Actually my report contains some fields from PA2001, PA2002 and one cluster table B2 (Table ZES). Can I create View by using these 3 tables? If it is not possible how can I get the data from the cluster? Can I create generic datasource by using cluster tables directly?
In SE11 Transaction the Cluster (table ZES) is showing invalid table.
I referred some Forums, but no use.
Can any body tell me procedure to get the data from a cluster (table ZES) ?
Waiting for you results.
Thanks and regards
Rajesh

HI Siggi,
Thank you for your reply..
I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
How can I use the Fields from the that table.?
What can I do now, can you please explain me about this point.
Waiting for your reply.
Thanks and Regards
Rajesh
Message was edited by:
rajesh

Why do we get the data from a view to a report.

hi
why do we get the data from a view to a report. is it possible to get the data from a view in all the cases?

hi Jyotssna,
Suppose you are planning to get the data from multiple tables then you got to specify seveal condtions and make use of joins which results in poor performance in fetching the data . In order to improve the performance we make use of views where the conditions of different tables are defined and the data is fetched accordingly.
Regards,
Santosh

Not able to get the data in COSB Table

Hi Colleagues,
I have created a Project and assign the WBS number to a Sales order and also have done all the settings in Result Analysis.
But still not able to get the data in COSB table.
Could you please suggest me the steps and process, Might be i have missed something..
Thanks in Advance
Regards
Nitin

Hi Ken,
I have below mentioned requirement
COSB will show value by object number and need to pass the object number to PRPS table to find the corresponding WBS element and then pass the WBS element to VBAP table to find the corresponding SO line item.
Please let me know as Functional prospect what I have to do to bring this values in COSB table.
Regards
Nitin

How to get the data from multiple nodes to one table

Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
Indra

HI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM.

How to get the data from pcl2 cluster for TCRT table.

Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.Ch

PL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh

How to get the data from Pooled Table T157E.

Hi Experts,
How to get the data from Pooled Table T157E.
Any help.
Thanks in Advance,
Ur's Harsha.

create some internal table similar to T157E and pass all data as per SPRAS.
After that use internal table in your program as per the requirement.
Regds,
Anil

Query to get the data of all the columns in a table except any one column

Can anyone please tell how to write a query to get the data of all the columns in a table except one particular column..
For Example:
Let us consider the EMP table.,
From this table except the column comm all the remaining columns of the table should be listed
For this we can write a query like this..
Select empno, ename, job, mgr, sal, hiredate, deptno from emp;
Just to avoid only one column, I mentioned all the remaining ( 7 ) columns of the table in the query..
As the EMP table consists only 8 columns, it doesn't seem much difficult to mention all the columns in the query,
but if a table have 100 columns in the table, then do we have to mention all the columns in the query..?
Is there any other way of writing the query to get the required result..?
Thanks..

Your best best it to just list all the columns. Any other method will just cause more headaches and complicated code.
If you really need to list all the columns for a table because you don't want to type them, just use something like...
SQL> ed
Wrote file afiedt.buf
1 select trim(',' from sys_connect_by_path(column_name,',')) as columns
2 from (select column_name, row_number() over (order by column_id) as column_id
3        from user_tab_cols
4        where column_name not in ('COMM')
5        and   table_name = 'EMP'
6       )
7 where connect_by_isleaf = 1
8 connect by column_id = prior column_id + 1
9* start with column_id = 1
SQL> /
COLUMNS
EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,DEPTNO
SQL>

How to get the data from the model node like a table ?

I want to get the data from the model node once a record ,and the node is bound to a internal table in the RFM which I called in the R/3 system. Who can give me some advice to achive it?Thank you!!

Hi,
To get the data from the node:
wdContext.node[your node name].current[node name]_InputElement().get[specific element in the node];
or you van use:
wdContext.current[your node]Element().get[your element in the node];
examples:
wdContext.nodeZ_Mepro_Po_Detail_Stock_Distri_Input().currentZ_Mepro_Po_Detail_Stock_Distri_InputElement().getUcpd_Flag();
wdContext.currentT_Delv_ReqsElement().getShelflife();
regards,

How to get the data from multiple tabes into single table

hi all,
here i am having 10 data base tables,how to get the data into a single table.
regards,
subba reddy

hi,
non XI/PI related
Regards,
Michal Krawczyk

How to get the data from a table cell

Could somebody suggest me how I can get the data value from a table cell if I set that cell a Double object previously.
Thanks very much

Thanks for camickr's information.
And thanks uhrand,
I haven't got it sloved. I am sick on this problem.
I have the methods to let the table editable. My tableModel code is from Sun Tutorial.
It has the code like this:
public int getColumnCount() {
            return columnNames.length;
         public int getRowCount() {
            return data.length;
          public String getColumnName(int col) {
            return columnNames[col];
         public Object getValueAt(int row, int col) {
            return data[row][col];
         * JTable uses this method to determine the default renderer/
         * editor for each cell. If we didn't implement this method,
         * then the last column would contain text ("true"/"false"),
         * rather than a check box.
        public Class getColumnClass(int c) {
            return getValueAt(0, c).getClass();
         * Don't need to implement this method unless your table's
         * editable.
        public boolean isCellEditable(int row, int col) {
            //Note that the data/cell address is constant,
            //no matter where the cell appears onscreen.
            if (col < 1) {
                return false;
            } else {
                return true;
         * Don't need to implement this method unless your table's
         * data can change.
        public void setValueAt(Object value, int row, int col) {
            if (DEBUG) {
                System.out.println("Setting value at " + row + "," + col
                                   + " to " + value
                                   + " (an instance of "
                                   + value.getClass() + ")");
            data[row][col] = value;
            fireTableCellUpdated(row, col);
            if (DEBUG) {
                System.out.println("New value of data:");
                printDebugData();
        public void printDebugData() {
            int numRows = getRowCount();
            int numCols = getColumnCount();
            for (int i=0; i < numRows; i++) {
                System.out.print("    row " + i + ":");
                for (int j=0; j < numCols; j++) {
                    System.out.print(" " + data[i][j]);
                System.out.println();
            System.out.println("--------------------------");
        }

How to get the Data type of the Internal Table.

How can i get the data types used to create an internal table
TYPES : BEGIN OF t_makt,
          matnr    TYPE    matnr,
          maktx    TYPE    maktx,
        END OF t_makt.
Like this some function will give me which data types i have used for the internal table at run time.

Use the FM ..
data : int_fcat type SLIS_T_FIELDCAT_ALV.
REUSE_ALV_FIELDCATALOG_MERGE ..
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
       EXPORTING
            I_PROGRAM_NAME         = sy-repid
            I_INTERNAL_TABNAME     = 'IMAT'   <-- this is your internal table
             I_INCLNAME             = sy-repid
       CHANGING
            CT_FIELDCAT            = int_fcat <--- this contains all the fields along with their characteristics ...
       EXCEPTIONS
            INCONSISTENT_INTERFACE = 1
            PROGRAM_ERROR          = 2
            OTHERS                 = 3.

I want to get the data of a table inside the Form but it is not passed

I want to get the data of a table inside the Form but it is not passed to the form by tables parameters.
How can I do this.
Regards

If there is a problem with defining it globaly, you can define a field symbol globably and point to it. For example. It would probably be better to define your table globably.
report zrich_0003 .
field-symbols: <imarc> type marc_upl_tt.
start-of-selection.
perform get_data.
*       FORM get_data                                                 *
form get_data.
data: imarc type table of marc with header line.
select * from marc into table imarc up to 10 rows.
assign imarc[] to <imarc>.
perform write_data.
endform.
*       FORM write_data                                               *
form write_data.
data: xmarc type marc.
loop at <imarc> into xmarc.
    write: / xmarc-matnr, xmarc-werks.
endloop.
endform.
Regards,
Rich Heilman

Tables or Views to get the data

Similar Messages

Maybe you are looking for