Take quiz, review wrong answers, take quiz again. Possible?

I am building an application that teaches middle-school math. The teaching goes like this:
1. Learner watches a flash video math lesson, e.g., how to do exponents.
2. The learner takes a multiple choice quiz.
3. If the learner misses any questions, they can choose to watch a short video showing how to solve that specific problem correctly.
Repeat steps 2-3 until final score is 100% or until they choose to stop.
Does Captivate 4 have the capability to do this sort of thing? Specifically, is there a way to:
Isolate and/or track the individual questions that were answered incorrectly and provide a link to a specific slide that shows how to do it correctly.
AND
Start another quiz -- from scratch -- allowing learner to take quiz again.
The key in this concept is that the learner be able to take the quiz as many times as they like, watching review videos for those questions they get wrong.
Does anyone have experience with this paradigm? Thanks.

You could do this during the quiz (when the student gets the wrong answer, you could give them a message to watch the remedial video, and after watching the video, they could re-attempt the question they answered incorrectly).

Similar Messages

Reviewing Slides On Wrong Answer?

When in questions is there a way of reviewing previous slides when a wrong answer is given; for example:
A standard presentation of 50 slides is viewed and then candidates are taken to the question slides
If question 1 is answered correctly it moves onto question 2
if question 2 is answered incorrectly the candidate is then taken taken to the relevant slide (say slide 30) and returned to question 2 for another attempt.
The only way I have managed to do this so far is to do a slight workaround by changing the way the reporting works i.e. duplicating the relevant reiew slides and putting them after the question slides. Unfortunately this means the only way I can record their scores is to show quiz attempt not the native scoring results because on each review (out of the quiz) it resets the scores and shows an overall quiz fail for each wrong answer. This obviously isn't the correct way of reporting quiz scores i.e.
Number of questions set
Incorrect answers
Correct answers
Percentage
Pass/Fail
This means that using this workaround I'm not getting the level of reporting normally available
So my question is simply, is there a proper way I can record the correct scores and still retain the ability to review wrong answers? This approach encourages a pro-active way to learn instead of penalising people for incorrect answers and allows them to learn without having to sit through a long presentation more than once - hence me wanting keep this style and be able to get full featured reporting.
I apologise if I'm being a little long-winded in my explanation or indeed if I'm missing something pretty basic with the software.
Many thanks in advance for anyone that may be able to help me with this
Kind regards
Martyn

Hello Martyn
Do not know if this has anything to do with etiquette, just did not know if you were asking me or the other user more help.
As we both explained: with the Question slides that are in CP (will call them the default Quiz slides) this will not be that easy. You will have to give a lot of attempts for the Quiz to the user to make this possible. There is no way to change the system variables that store the score (such as cpQuizInfoTotalProjectPoints). If you want to realize your workflow you need to construct the Question slides yourself. That is why I offered some articles I published about this subject in CP5.
You are not the first to ask for this kind of workflow, plan to work out an example but that will not be done today because of other priorities (some exams to be graded are waiting for me). The idea in steps is:
Create your question slides using non-interactive objects like text captions, images and interactive ones buttons, text entry or click boxes (that get a score); this will not be possible for all kind of Question types, dragging p.e. as for matching or sequence questions is not possible, hotspot is possible.
Be sure that all slides (to be reviewed before giving a second answer after an incorrect answer) are in the quizzing range (between first scored 'thing' and the score slide)
On incorrect answer, create an advanced action that jumps to the slide(s) to be reviewed; on finishing those slides have an action that returns them to the question slide.
On re-entering the question slide, re-initialize the score (to 0 if there is no 'penalty' because of the review) so that the user can answer again.
Is this the workflow that you want? Which kind of question slides are you using? Is there a 'penalty' if the review possibility is used, I mean is the score that can be obtained lower than the first one?
Lilybiri

Can a Quiz show Wrong Answers at End?

I have found tutorials outlining how to make a simple quiz that says if you got the individual question right or wrong.
My client would like to display the wrong answers "AT THE END". Is there something possible along these lines?
Thanks:)

Hopefully never too late to chip in...
You can certainly show the user what they got right and wrong, or only what they got wrong as you see fit, but it is not a simple matter to do. A lot will depend on the length of the quiz, the number of registers you are using to create it and so on. However, in just the same way that you can keep track of how many you scored, you can also create a system that takes you through a number of screens to say what you got wrong.
However, you cannot automatically generate a list of the incorrect answers and present them as a single screen (or menu) unless you have only got a very few questions in total. This is because you need to create a screen for every single possible combination of answers and pick the right one from the whole lot.
Instead, what you do is show a screen saying something like "you got five wrong... click to see them" and then present the viewer with a series of five screens that they can click through to see where they went wrong.
It isn't a straightforward task for anyone who has not scripted a DVD before... but it is possible to do.
How many questions are there in total on your quiz?

HT1918 I'm trying to change my CC on iTunes and it gives me an error saying that the info doesn't match my banks info. But it's the same card I had on there before. Then took it off and now it won't take it again. Grrrr. Does anyone know what's up?

I'm trying to change my CC on iTunes and it gives me an error saying that the info doesn't match my banks info. But it's the same card I had on there before. Then took it off and now it won't take it again. Grrrr. Does anyone know what's up?

Click here and request assistance.
(91679)

Captivate 4 - Go back a screen and Wrong answer wont pick up

Captivate 4 is driving me mad !
Got a large course in Cap 4, system training, theres various click area interactions.
If i preview the slides in Captivate or publish it i get the same bug...
I'm asked to click on a button, i click away and get the wrong answer feedback. All fine, i click on the button and i move to the next screen.
If i then click on back to go to the previous slide, if i try to click away to get the wrong answer it never comes up. The hotspot is there so if i click on the button which its over i can go forward. But for some reason the wrong answer feedback never appears a second time.
I've deleted it, added a new one, same as before, just W/A feedback, checked to 'infinite attempts' but it only seems to appear once. If i go back to the page and get the wrong answer nothing !
Got a major deadline coming up soon, dont expect this basic bug to be appearing, never had these problems in Cap 3.
Arrgh. Any ideas ?

Not sure that I can help on this, but I have a general clue.
In general, you must go forward to go backward when scoring. The <BACK button is not what I am referring to. Try an interim slide that is AFTER your scored interaction. It might provide a message like: Thank you for trying, but your answer was not correct on the first try. Click Continue to review that concept again... CONTINUE
The Continue button is the link back with the GoTo feature of the button.
You can also GoTo slides before the interaction to prep them.
I am not sure about this for interactions (it is true for Quizzes)... Use Must take Quiz to Continue should be enabled for Quizzes in the global settings.
Hope this helps
Joe C.

Wrong answer revision and retest

I am making a training package that consists of multiple
manuals and quizzes, all are separate projects, upon finishing each
manual the choice is given to take the quiz. If they accept the
they jump over to the relevant quiz, but I've been instructed to
alow each person to reread a certain section if they get it wrong,
which means they'd have to jump back to a specific page on a
separate project, then reread only a desired few pages and then
jump back to the quiz answer a different question on the same topic
all while keeping the flow of scoring intact!
This doesn't sound possible, so is it possible to get given
the wrong answers at the end of the quiz to review and see which
answers they got wrong then they can retake the manual and then the
quiz (can I alter the questions the second time around?).
Thanks,
Jeremy

This appears to have been repeatedly posted. Possibly due to
a forum hiccup. Please direct any replies to the original thread.
You may do this by
clicking
here

Review course answers

I have a course in Captivate 3 with a bottom navigational bar
attached (luckily). I've added a button to review the answers, you
click that and you can see the answers for each question. Obviously
the Submit button is not active and nor are the forward/backwards
buttons on screen.
The only way to move forward is to use the small |> and
<| buttons on the bottom navigational bar. The course was going
to be packaged without this bottom bar but if you dont have this
theres no way of reviewing the questions and moving
backwards/forwards is there ?
I cant add any text on these reviewed questions either such
as 'click on the small backwards/forwards icons to review your
answers'.
Anyone have any ideas ? Its the first time i've allowed the
user to review the questions but i'm not too keen on the way you
cant seem to move forward between them ?

On the Options tab for each question you have the option for
adding a Back button and a Skip button. These buttons allow you to
move forward and backward during the review. Unfortunately, they
are also active while the user is taking the quiz. To If you
require the user to answer all of the questions in your
Preferences>Settings box, they can't use the Skip button to skip
questions without giving an answer.
Once the buttons appear on the slide you can also change the
text. So if you don't like Skip, you can change it to say Forward.
HTH!
Kelly

Clear Text Entry after wrong answer

Hello,
I'm searching a way for clearing text entry box after the
user entered a wrong answer.
If this it's not possible to do that with text entry, is it
possible to do that with captivate question quiz, or somthing else?
Thank you
Miky Aviel

The problem is that the text-entry object is a "scoring
object" and it is considered best practice NOT to allow movement to
and fro once a scoring object has been answered.
The solution is to move forward through the eLearning
experience, not back and forth. So how does that apply? Well, one
way is to duplicate the slide, including the text-entry object, so
the same problem can be offered for solution in the slide(s)
following the failed effort. The same principals apply to question
slides ... if you want the user to retake a failed effort, you
should add (for instance) an "explanation" slide after the question
slide and route the use to that following failure; then the
following slide can be a re-creation of the question slide if you
want to give the student a second chance at the same question.
There are problems with doing it this way - for one, the
scoring is going to be "skewed" - or could be unless the second
attempt is weighted at "zero". But since the basic learning concept
of asking each question only once is being thrown out anyway, the
skewed scoring may not be a big deal (?).

I am trying to use siri. It was working earlier. Now when I ask it to call name and number it say, Siri keeps saying( SORRY SOMETHINGS GONE WRONG CAN YOU TRY AGAIN) I HAVE TRIED SEVERAL NAMES AND NUMBERS IN MY CONTACTS. What am I doing wrong or how can

I am trying to use siri, Siri keeps saying( SORRY SOMETHINGS GONE WRONG CAN YOU TRY AGAIN)
I HAVE TRIED SEVERAL NAMES AND NUMBERS IN MY CONTACTS.
What am I doing wrong or how can I correct it.

Siri Fix
Turn OFF Siri
Reset Network Settings
Turn ON Siri
Done
Steps:
Tap Settings App>General>Siri>Turn OFF
General>Reset, near bottom>Reset Network Settings
Tap Settings App>General>Siri>Turn ON
Done

Sorry something went wrong. Please try again. Power BI Scheduled Data Refresh

My Power Pivot Connection can be refreshed locally from Excel workbook. However I receive the following error when attempting a data refresh from the Power BI site:
Sorry, something went wrong. Please try again. Correlation ID: 70aad105-6563-42de-9c27-272ecfa082ee start date 2/24/15 at 11:38 AM

Hi Ryan,
Will you please check the following:
1. are you refreshing the data from within Excel online?
2. If yes, does your workbook connect to on premises data source?
if yes, then refresh of on premises data sources from within Excel online is not supported. Schedule refresh is the only supported means to refresh workbooks connecting to on premises data sources or using Power Query.
If this does not answer your question. Please mention the steps you followed & attach an image of the error you see.
-mini

Something went wrong. To try again, reload the page and then start the workflow

We have a SP 2013 farm with Aug 2013 CU. While trying to start an SPD 2013 platform workflow from browser I get an error "Something went wrong. To try again, reload the page and then start the workflow."
I could also see the following in ULS:
System.NotSupportedException: Not supported in Windows authentication mode.
at Microsoft.SharePoint.IdentityModel.SPIdentityContext.Create(SPUserToken token, Boolean
isShareByLinkGuestUser)
at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.GetApplicationUserCredentials
(WorkflowServicesContext context) StackTrace:
at Microsoft.Office.Server.Native.dll: (sig=35339f9c-8871-4ef1-9118-9c1bd0cb6598|2|
microsoft.office.server.native.pdb, offset=131CE)
at Microsoft.Office.Server.Native.dll
This seems to be a bug and is solved in Mar 2013 PU but I have Aug CU. The web where I have this workflow has classic mode auth. Has anyone come across this error before?
I have checked the following:
1. Service
Bus Gateway and Service
Bus Manager Broker services are started
2. Authentication for this web application is Windows NTLM
-- The opinions expressed here represent my own and not those of anybody else -- http://manojvnair.blogspot.com

Thank you for the steps.
I have checked User Profile service and it is started and running fine. The user who is trying to start the workflow (me) has a profile created. I'm not starting wf as system account and my account is not added to web application user policy. Workflow isn't
even firing when I try to edit list item.
I tried to edit the list item as system account and workflow started this time. But it does to suspended state with the following message:
RequestorId: 54f4a912-ab0b-a1f2-0000-000000000000. Details: RequestorId: 54f4a912-ab0b-a1f2-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401
{"SPRequestGuid":["54f4a912-ab0b-a1f2-be58-305dd8b6eab4"],"request-id":["54f4a912-ab0b-a1f2-be58-305dd8b6eab4"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["2"],"SPIisLatency":["1"],"MicrosoftSharePointTeamServices":["15.0.0.4535"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Thu, 24 Apr 2014 15:32:05 GMT"],"Server":["Microsoft-IIS\/8.0"],"WWW-Authenticate":["NTLM"],"X-Powered-By":["ASP.NET"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
WhenI try to start wf I can see the first error:
System.NotSupportedException: Not supported in Windows authentication mode.
at Microsoft.SharePoint.IdentityModel.SPIdentityContext.Create(SPUserToken token, Boolean isShareByLinkGuestUser)
at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.GetApplicationUserCredentials(WorkflowServicesContext context) StackTrace:
at Microsoft.Office.Server.Native.dll: (sig=35339f9c-8871-4ef1-9118-9c1bd0cb6598|2|microsoft.office.server.native.pdb, offset=131CE)
at Microsoft.Office.Server.Native.dll: (offset=21B4D
-- The opinions expressed here represent my own and not those of anybody else -- http://manojvnair.blogspot.com

I get message, Problem scanning. Something went wrong. Please try again.

My printer was working fine when scanning, but now I get a message:
Problem scanning. Something went wrong. Please try again. I turned my printer off, rebooted my computer...updated the printer from hp website...but nothing. I can see the document in preview, and I hear the scanner working. HELP!!

Hey there @leandermw , Welcome to the HP Forums
I understand you're having scanning problem with your Deskjet 2540, on Windows 8.1 and would like to help you.
I would first suggest that you run the Print and Scan Doctor, and choose "fix scanning" to see if the tool can correct the issue. Send me the results in your reply as well.
If you have the printer connected to a network, either wireless or ethernet, try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer and try scanning.
You can also power reset the printer itself:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Try scanning from the HP scan software on your computer, and also make a copy from the front of the printer.
Write me back with the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Something went wrong. To try again, reload the page and then start the workflow, error on starting a workflow

i have already create a custom workflow with sharepoint designer and checked for error and it seem fine. i published it on my document library so apprear the first issue : the column that contain the name of my workflow apprear and the link to start my workflow(contain
the name of my first stap) doesn't appear. the second problem is that when i tried to start the workflow manually on a specific document i get an alert : Something went wrong. To try again, reload the
page and then start the workflow
i tried : -restart service bus message broker -restart service bus gateway -recycle workflowMgntpool -flushed the dsn resolver cache and the problem still occure
on uls log viewer it seems to be an error on w3wp.exe process
the workflow history is empty

Hi Mokhtar,
For your first issue, when you publish a workflow to your document library, only after you start the workflow, then the link to go on the workflow(contain the name of the workflow stage) will appear.
For your second issue, my understanding is that you got an error when you manually start a SharePoint Designer 2013 Workflow.
Please go to Administrative Tools->Services, make sure the following services are started.
Workflow Manager Backend
Service Bus Message Broker
Service Bus Gateway
Windows Fabric Host Service
Here are similar posts for you as a reference:
https://social.msdn.microsoft.com/Forums/office/en-US/12f8ae26-6889-4227-a3fc-dd29a38230a6/something-went-wrong-to-try-again-reload-the-page-and-then-start-the-workflow?forum=sharepointcustomization
http://community.office365.com/en-us/f/154/t/277480.aspx
If the issue still exists, please check Event Viewer to check more information about this issue.
http://msdn.microsoft.com/en-us/library/jj193526(v=azure.10).aspx
I hope this helps.
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Sorry, something went wrong. Please try again.

Hi.I had 32 bits and i changed to 64 bits and now i cant connect to skype.
I have a Microsoft account and i cant connect even with Facebook.
It says Sorry, something went wrong. Please try again.
Please helpP.S: I dont have .net framework. Is it because of it?

Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

Resetting Wrong Answers only in a Drag and Drop Interaction

Hello All,
What I would like to see in the interaction is -
Learner drags items to a specific location
clicks submit to check answers
only the wrong answers reset to the original screen location
feedback displays
Learner trys again and repeats until all items are in the correct location.
Is this scenario possible with the drag and drop? I can get everything but the "only the wrong answers reset" to work.
Any help would be greatly appreciated.
Thank you in advance
Kelli

Not possible. Same as for normal question slides: Reset will reset everything. You can have the wrong answers getting back immediately, but it will not wait for Submit in that case.

Take quiz, review wrong answers, take quiz again. Possible?

Similar Messages

Maybe you are looking for