Can a Quiz show Wrong Answers at End?

I have found tutorials outlining how to make a simple quiz that says if you got the individual question right or wrong.
My client would like to display the wrong answers "AT THE END". Is there something possible along these lines?
Thanks:)

Hopefully never too late to chip in...
You can certainly show the user what they got right and wrong, or only what they got wrong as you see fit, but it is not a simple matter to do. A lot will depend on the length of the quiz, the number of registers you are using to create it and so on. However, in just the same way that you can keep track of how many you scored, you can also create a system that takes you through a number of screens to say what you got wrong.
However, you cannot automatically generate a list of the incorrect answers and present them as a single screen (or menu) unless you have only got a very few questions in total. This is because you need to create a screen for every single possible combination of answers and pick the right one from the whole lot.
Instead, what you do is show a screen saying something like "you got five wrong... click to see them" and then present the viewer with a series of five screens that they can click through to see where they went wrong.
It isn't a straightforward task for anyone who has not scripted a DVD before... but it is possible to do.
How many questions are there in total on your quiz?

Similar Messages

  • Take quiz, review wrong answers, take quiz again. Possible?

    I am building an application that teaches middle-school math. The teaching goes like this:
    1. Learner watches a flash video math lesson, e.g., how to do exponents.
    2. The learner takes a multiple choice quiz.
    3. If the learner misses any questions, they can choose to watch a short video showing how to solve that specific problem correctly.
    Repeat steps 2-3 until final score is 100% or until they choose to stop.
    Does Captivate 4 have the capability to do this sort of thing? Specifically, is there a way to:
    Isolate and/or track the individual questions that were answered incorrectly and provide a link to a specific slide that shows how to do it correctly.
    AND
    Start another quiz -- from scratch -- allowing learner to take quiz again.
    The key in this concept is that the learner be able to take the quiz as many times as they like, watching review videos for those questions they get wrong.
    Does anyone have experience with this paradigm? Thanks.

    You could do this during the quiz (when the student gets the wrong answer, you could give them a message to watch the remedial video, and after watching the video, they could re-attempt the question they answered incorrectly).

  • Can't login, shows wrong password.

    hello everyone,
    I'm using my skype account many years, and 30 minutes ago my skype closes and i was try to login again, but it shows wrong password, than i was going to reset new password, but mistake.. there was message something about .. i need to contact with skype support... i realy need my skype account back, beacuse i have many business people there and do this without reason i think its not the best skype idea.
    What i must do to get back my skype account...?
    Thank you!

    Greetings,
    Password-related matters must be resolved by Skype Customer Service; we here in the Community are not authorized to access Skype accountholder data.  Although it may seem silly to do so, if you are locked out of your account, you will need to create a new account in order to contact Skype Customer Service.
    Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
    You will need to proceed through each step, one at a time. Sign on to the Skype website as requested. Choose the subject and topic which most closely matches the item you need assistance with. Then, continue past Step 2 of the instruction where several articles from the FAQ library will appear for you to review, and proceed to Step 3, Continue Support Request (the blue "button" appears at the lower right corner of the website page). You may also skip through Step 4 where you will be referred back here to the Community; no need to do this as the Community is where you started. When you complete the webform and click Submit, your information is relayed to Skype and you will receive a reply via e-mail.
    If you are a Skype Premium or other eligible customer, you will be routed to start an instant message chat session with a Customer Service agent.
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Quiz not advancing after incorrect  answer (quiz uses user variables to show wrong answers)

    Hello All,
    Long time lurker, first time poster. Hopefully someone can help me.
    After viewing this excellent video on the adobe captivate blog "so what were the right answers anyway" I created a quiz with user variables and a conditional advance action. It displays red crosses next to the each question that was incorrectly answered at the end of the quiz.
    I set up user variable for each question with a value of 0. On an incorrect answer the variable would be set to 1.
    At the end of the quiz is a slide which lists the question and shows a red cross next to each question with a variable set to 1. uses conditional action which is triggered "On Enter"
    This works, but my problem is when I preview the quiz (in browser or as SWF), on an incorrect answer the failure caption appears but will not actually advance to the next question when I click anywhere or press y. It works OK on correct answers.
    I can sovle this by adding a next button, but I want to understand what I'm doing wrong.
    Using captivate 6.0.1.240 (boxed copy)
    windows 7
    images on quiz properties and  conditional action below
    Any help appreciated.
    Regards
    Jacob C

    I tested this work flow on 6.1.319 and it works fine. So it is a bit guessing in the wild... no 6.0.1.240 around for the moment. Seems strange, because a simple action like your Assign action should normally release the playhead. But of course it is a question slide and they do not always behave as expected. Could you try to replace the Assign action by a standard advanced action with 2 statements, like this:
    Assign var_question_1 with 1
    Continue
    And please, let me know if it works? This could be a difference between the two versions, but not sure at all.
    Lilybiri

  • Key Figures With Hide can be shown showing wrong values when displayed in a query

    Hi Experts,
    I have a qiery with two structures in the column(cell Definition) three key figures are displayed and the rest are all hide can be displayed. However whenever i display one of the hidden key figures along with one displayed key figures it initially shoes incorrect values. Once i add another key figure (which has status always show) the hidden jey figure value gets corrected. Is it a problem with the structure? Kindly assist.For example  when i display the actuals(always show) and actuals rate(hide can be shown) the values for actuals rate are wrong , however when i add the plan rate(always ahow) the values for actual rate gets corrected. Screenshots for structures below.

    Hi Sayanto,
    For this I would recommend you to check the Key figure definition in all 3 situations.
    1. original display
    2. display of hidden KF
    3. Display of existing KF
    I suspect that cell references may have some effect on the calculation as you are adding the hidden KF in analyzer directly. You can prove this only by checking  Key figure definition.
    Please let me know if you are facing any issue in getting the Key figure definition itself.
    Also, as Cornelia suggested check if you have any constant selection applied to any of your KFs.
    Hope this helps.
    -Swati.

  • PDS showing wrong validity date

    When i am transferring  PV's from ECC to APO the validty date is showing wrong
    Suppose my end validity date is 22/04/2015 .when i am doing curto_create no errors is getting  but it is showing 23/04/2015. one day advance in APO
    what could be reason

    Hello Virendra,
    As i Know during PDS integration the validity dates are converted from local time zone of the plant in which the production version exists to UTC
    Please refer Comparison of PP/DS Production Data Structure - Integration via APO Core Interface (CIF) - SAP Library
    Best Regards,
    R.Brahmankar

  • Mail suddenly not being received from server. The ISP tells me there's nothing wrong at his end. I can see emails on the server if I look up WebMail; they don't come into Mail. I haven't changed anything lately.

    Mail suddenly not being received from server. The ISP tells me there's nothing wrong at his end. I can see emails on the server if I look up WebMail; they don't come into Mail. I haven't changed anything lately. The incoming server details haven't changed; the Connection Doctor shows the accounts are connected; I've turned everything off including the modern. Have exhausted my limited knowledge. Anyone with something similar?

    I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
    Today I discovered a new treasure of doggie poop in Lion. No Save As......
    I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
    So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in  mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
    are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
    I am starting to believe that Apple is Satan.

  • HT204266 Somehow I tapped the wrong button and ended up in the Spanish App Store. I can only purchase apps in the American App Store. How do I get back to the American App Store? Thanks in advance. Btw, I use an iPad 3.

    Somehow I tapped the wrong button and ended up in the Spanish App Store. I got a message saying I can only purchase apps in the American App Store. How do I get back to the American App Store? Thanks in advance. Btw, I use an iPad 3.

    Settings>iTunes and App Stores>Apple ID
    Tap your ID
    Tap View Apple ID
    Enter your password
    Go to country/region in the popup window to change the store

  • Why I can't connect to games center?it always shows wrong iPad I'd

    Well when I connect to games center I log in ok but when I try to Dow OAS something I need to write my pass of my iPad I'd but i can't because it always shows wrong I'd

    http://support.apple.com/kb/TS3297

  • When I attach a file to outgoing mail it shows up in the body of the e-mail. How can i make it only show up at the end or elsewhere?

    When I attach a file to outgoing mail it shows up in the body of the e-mail. How can i make it only show up at the end or elsewhere?

    Edit > Attachments > Insert Attachments at End of Message. If a new message is the active window, the option applies only to that message. If you don't have a new message open, then the option becomes Always Insert Attachments at End of Message.

  • Quiz variables show wrong result on multiple quiz attempts

    Hi everbody
    cp4: I have a quiz with certificate at the end of my project. On the certificate the result is shown with the help of the variable cpInfoPercentage. The user has a maximum of 3 attempts to pass the quiz. Now, when he needs more than one attempt, the variable shows the sum of the results from each attempt. The same is true for the variable cpQuizInfoPointssored.
    Has anyone made the same experience and knows a way arount it?
    Thanks for your help.
    Petra

    I'm just bumping this up because I am having a similar problem. cpInfoPercentage variable is not resetting on multiple quiz attempts, even though quiz results screen is showing correct score and pass/fail message. Is there a way to reset this variable, or some other workaround?  THanks.

  • When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

    When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Quiz Slides - can a user change their answer after submit

    I have been asked to do something with Captivate 2 that I am
    not sure can be done.
    Can a quiz be set up so that a user can go back to a
    previously answered question (after it has been submitted) and
    change their answer to that question and re-submit the answer? If
    so what would be the quiz settings?
    Alternatively, can the answers be saved in a session cookie
    and submitted all at once? This would allow a user to move back and
    forth to different questions and change their answers, then when
    they are finished do the submit all at once.
    I thought I saw this functionality in Captivate 2 but it
    might have been Articulate Presenter.
    TPK

    Enable the web server and then enable web services, and enable user password changes.  (Details vary by the OS X Server version.) 
    There are other mechanisms available, such as allowing the user to log into the server via ssh.  That assumes the user is comfortable with or can be provided the sequence to reset their password via passwd or other local tools.

  • I can't downloamd Things just because I forgot the security questions and I I'm putting the security questions the wrong answers and they blocked me how can I unblock it

    I can't downloamd Things just because I forgot the security questions and I I'm putting the security questions the wrong answers and they blocked me how can I unblock it

    Forgotten Security Questions/Answers
    You need to contact Apple by:
    1 - Use the Express lane and start here:
    https://expresslane.apple.com
    then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
    or
    Apple - Support -form iTunes Store - Contact Us
    2 - Call Apple in your country by getting the number from here:
    http://support.apple.com/kb/HE57
    or           
    Apple ID: Contacting Apple for help with Apple ID account security
    3 - Use your rescue email address if you set one up
    Rescue email address and how to reset Apple ID security questions
    For general  information see:
    Apple ID: All about Apple ID security questions

  • HT1918 People at the AT&T store put in the wrong info so now I am trying to download movies and I can't cause they put in the wrong answers to the  question and I have no clue how to change it

    All I want to do is down load movies for my son on his iPad mini and I can cause I have no clue what my answers are to the questions are.. The person at AT&T put in the wrong answers so  I have no clue how to change them

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (96931)

Maybe you are looking for