Taking a long time to do first step?
Usually Match has been pretty speedy, I have 10000 cuts of music, I chaged ny Genres from 250 to 20 with TuneUp but noeiTunes match seems stuk at the first step? How long should I have to wait before I get concerned?
I was tired of waiting. Turned natch off, then resumed..no difference. SO I turned Match off from iTunes Menue Bar. Now I just wait and wait. Gathering information seems Stuck.. The progress bar has been completed the Whole time I'm waiting..Is this normal? How long could Gathering information Take?
Anyone?
Like many users on the other similar threads, my machine stayed on step one for over 48 hours. At the suggestion from another user comment, I quit iTunes and restarted it.
The "gathering information" progress bar seemed to start over from the beginning, but within an hour, it was underway "Matching your music with songs in the iTunes store".
It has already checked 4,000 of 29,000 songs, but I have a 25mbps up/down FIOS connection.
Would have been nice to know in the beginning....
Another suggestion I took is creating smart folders for each of the following iCloud States: Duplicate, Error and Ineligible
I have lots of errors and ineligibles..... :-(
Similar Messages
-
We are running a report ? it is taking long time for execution. what step
we are running a report ? it is taking long time for execution. what steps will we do to reduce the execution time?
Hi ,
the performance can be improved thru many ways..
First try to select based on the key fields if it is a very large table.
if not then create a Secondary index for selection.
dont perform selects inside a loop , instead do FOR ALL ENTRIES IN
try to perform may operations in one loop rather than calling different loops on the same internal table..
All these above and many more steps can be implemented to improve the performance.
Need to look into your code, how it can be improved in your case...
Regards,
Vivek Shah -
I have just bought iphone 5 and i have a problem in charging it , firstly it took a long time to charge when i opened it to the first time , and its nearly dont charge on 110 output, and its taking a long time to charge on 220 reaches 50% in 1 hour is this normal?
The charger block is universal and is able to handle multiple votages. One hour to reach 50% seems fine to me if the phone was completely flat to start with. Just leave it on charge for as long as it takes to reach 100%. I leave mine connected overnight all the time and it does not harm the battery
-
My IMac , just started, taking a long time to get to the desktop. First I have a gray screen, than a gray screen with a gray globe, a blue screen and finally my desktop. Takes about 4 minutes. What is wrong and what do I do?
Once the desktop is up and the iMac ready to use, open Systeem Preferences (Apple menu) and click the Startup Disk item. In the new screen, make sure that OS X on your hard drive is selected in the top row - click it once to make sure. Then test.
-
Why are my apps taking a long time to update both on my phone and iPad?
Why are my apps taking a long time to update both on my phone and iPad?
Hi ariasm21,
Thanks for visiting Apple Support Communities.
If the App Store on your iPhone seems unresponsive or app updates are not completing, try the steps below.
First force close the apps using these steps:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app's preview up to close it.
These steps come from this article:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Next, restart your device:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Try updating an app again. If the issues persist, you may want to troubleshoot your internet connection next:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
All the best,
Jeremy -
Time Machine Taking a Long Time to Index
Hi everyone.
I first noticed this today. My Time Machine is taking a long time to index. It's stuck on "Waiting for index to be ready (100)" for about 10 minutes at least, it seems. I did notice earlier today that it had to delete old backups to make space for new backups, and I'm wondering if that has anything to do with it. I'm in the process of doing a verification now, but here's the code from two backups earlier today.
Here's the one where it had to delete backups to make room for new and future backups.
1/30/13 5:48:13.069 PM com.apple.backupd: Starting standard backup
1/30/13 5:48:13.267 PM com.apple.backupd: Attempting to mount network destination URL: afp://Michael%20Payne@Extreme%20Pleasantville._afpovertcp._tcp.local/Time%20Mac hine%20Backups
1/30/13 5:48:13.749 PM com.apple.backupd: Mounted network destination at mountpoint: /Volumes/Time Machine Backups using URL: afp://Michael%20Payne@Extreme%20Pleasantville._afpovertcp._tcp.local/Time%20Mac hine%20Backups
1/30/13 5:48:35.120 PM com.apple.backupd: QUICKCHECK ONLY; FILESYSTEM CLEAN
1/30/13 5:48:40.280 PM com.apple.backupd: Disk image /Volumes/Time Machine Backups/Michael’s MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups 1
1/30/13 5:48:40.407 PM com.apple.backupd: Backing up to: /Volumes/Time Machine Backups 1/Backups.backupdb
1/30/13 5:54:50.703 PM com.apple.backupd: 500.8 MB required (including padding), 403.3 MB available
1/30/13 5:55:00.163 PM com.apple.backupd: Ejected disk image: /Volumes/Time Machine Backups/Michael’s MacBook Pro.sparsebundle
1/30/13 5:55:00.163 PM com.apple.backupd: Compacting backup disk image to recover free space
1/30/13 5:58:52.014 PM com.apple.backupd: Completed backup disk image compaction
1/30/13 5:58:52.016 PM com.apple.backupd: Starting standard backup
1/30/13 5:58:52.065 PM com.apple.backupd: Network destination already mounted at: /Volumes/Time Machine Backups
1/30/13 5:59:13.694 PM com.apple.backupd: QUICKCHECK ONLY; FILESYSTEM CLEAN
1/30/13 5:59:17.577 PM com.apple.backupd: Disk image /Volumes/Time Machine Backups/Michael’s MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups 1
1/30/13 5:59:17.673 PM com.apple.backupd: Backing up to: /Volumes/Time Machine Backups 1/Backups.backupdb
1/30/13 6:01:22.433 PM com.apple.backupd: 500.9 MB required (including padding), 424.6 MB available
1/30/13 6:02:40.909 PM com.apple.backupd: Deleted backup /Volumes/Time Machine Backups 1/Backups.backupdb/Michael’s MacBook Pro/2013-01-28-225651 containing 5.8 MB; 430.4 MB now available, 500.9 MB required
1/30/13 6:02:40.909 PM com.apple.backupd: Removed 1 expired backups so far, more space is needed - deleting oldest backups to make room
1/30/13 6:25:09.045 PM com.apple.backupd: Deleted backup /Volumes/Time Machine Backups 1/Backups.backupdb/Michael’s MacBook Pro/2012-05-12-095019 containing 1.08 GB; 1.50 GB now available, 500.9 MB required
1/30/13 6:25:09.045 PM com.apple.backupd: Deleted 2 backups containing 1.09 GB total; 1.50 GB now available, 500.9 MB required
1/30/13 6:25:09.045 PM com.apple.backupd: Backup date range was shortened: oldest backup is now May 20, 2012
1/30/13 6:28:35.009 PM com.apple.backupd: Copied 2289 files (7.3 MB) from volume Macintosh HD.
1/30/13 6:28:35.920 PM com.apple.backupd: 494.0 MB required (including padding), 424.6 MB available
1/30/13 6:28:35.921 PM com.apple.backupd: No expired backups exist - deleting oldest backups to make room
1/30/13 6:30:36.145 PM com.apple.backupd: Deleted backup /Volumes/Time Machine Backups 1/Backups.backupdb/Michael’s MacBook Pro/2012-05-20-194752 containing 55.0 MB; 479.6 MB now available, 494.0 MB required
1/30/13 6:30:36.146 PM com.apple.backupd: Removed 1 expired backups so far, more space is needed - deleting oldest backups to make room
1/30/13 6:33:16.203 PM com.apple.backupd: Deleted backup /Volumes/Time Machine Backups 1/Backups.backupdb/Michael’s MacBook Pro/2012-05-27-093117 containing 64.5 MB; 544.0 MB now available, 494.0 MB required
1/30/13 6:33:16.203 PM com.apple.backupd: Deleted 2 backups containing 119.4 MB total; 544.0 MB now available, 494.0 MB required
1/30/13 6:33:16.203 PM com.apple.backupd: Backup date range was shortened: oldest backup is now Jun 7, 2012
1/30/13 6:34:11.232 PM com.apple.backupd: Copied 1171 files (2.5 MB) from volume Macintosh HD.
1/30/13 6:34:44.355 PM com.apple.backupd: Backup completed successfully.
1/30/13 6:34:54.258 PM com.apple.backupd: Ejected Time Machine disk image.
1/30/13 6:34:54.493 PM com.apple.backupd: Ejected Time Machine network volume.
And here's the one where it started to take awhile to index.
1/30/13 7:21:11.358 PM com.apple.backupd: Starting standard backup
1/30/13 7:21:11.955 PM com.apple.backupd: Attempting to mount network destination URL: afp://Michael%20Payne@Extreme%20Pleasantville._afpovertcp._tcp.local/Time%20Mac hine%20Backups
1/30/13 7:21:12.540 PM com.apple.backupd: Mounted network destination at mountpoint: /Volumes/Time Machine Backups using URL: afp://Michael%20Payne@Extreme%20Pleasantville._afpovertcp._tcp.local/Time%20Mac hine%20Backups
1/30/13 7:21:38.074 PM com.apple.backupd: QUICKCHECK ONLY; FILESYSTEM CLEAN
1/30/13 7:21:41.754 PM com.apple.backupd: Disk image /Volumes/Time Machine Backups/Michael’s MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups 1
1/30/13 7:21:41.768 PM com.apple.backupd: Backing up to: /Volumes/Time Machine Backups 1/Backups.backupdb
1/30/13 7:23:47.444 PM com.apple.backupd: 452.8 MB required (including padding), 401.2 MB available
1/30/13 7:23:56.687 PM com.apple.backupd: Ejected disk image: /Volumes/Time Machine Backups/Michael’s MacBook Pro.sparsebundle
1/30/13 7:23:56.687 PM com.apple.backupd: Compacting backup disk image to recover free space
1/30/13 7:27:52.753 PM com.apple.backupd: Completed backup disk image compaction
1/30/13 7:27:52.754 PM com.apple.backupd: Starting standard backup
1/30/13 7:27:52.898 PM com.apple.backupd: Network destination already mounted at: /Volumes/Time Machine Backups
1/30/13 7:28:14.638 PM com.apple.backupd: QUICKCHECK ONLY; FILESYSTEM CLEAN
1/30/13 7:28:18.207 PM com.apple.backupd: Disk image /Volumes/Time Machine Backups/Michael’s MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups 1
1/30/13 7:28:18.309 PM com.apple.backupd: Backing up to: /Volumes/Time Machine Backups 1/Backups.backupdb
1/30/13 7:34:32.780 PM com.apple.backupd: 399.3 MB required (including padding), 937.6 MB available
1/30/13 7:34:32.780 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:35:32.919 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:36:34.779 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:37:36.419 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:38:37.465 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:39:39.420 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:40:40.628 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:41:41.317 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:42:42.105 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:43:42.982 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:45:20.244 PM com.apple.backupd: Copied 1381 files (6.4 MB) from volume Macintosh HD.
1/30/13 7:45:21.507 PM com.apple.backupd: 382.5 MB required (including padding), 826.5 MB available
1/30/13 7:45:21.508 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:46:22.938 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:47:24.914 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:48:25.931 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:49:26.589 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:50:27.743 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:51:27.952 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:52:28.736 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:53:29.707 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:54:30.516 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:55:31.297 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:56:33.290 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:57:35.031 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:58:36.765 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 7:59:37.721 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 8:00:38.577 PM com.apple.backupd: Waiting for index to be ready (100)
1/30/13 8:01:48.483 PM com.apple.backupd: Copied 1069 files (5.6 MB) from volume Macintosh HD.
1/30/13 8:02:02.230 PM com.apple.backupd: Starting post-backup thinning
1/30/13 8:02:46.083 PM com.apple.backupd: Deleted /Volumes/Time Machine Backups 1/Backups.backupdb/Michael’s MacBook Pro/2013-01-29-183909 (5.4 MB)
1/30/13 8:02:46.083 PM com.apple.backupd: Post-back up thinning complete: 1 expired backups removed
1/30/13 8:02:46.083 PM com.apple.backupd: Warning: backup disk now has only 644.1 MB free without removing old backups
1/30/13 8:02:46.259 PM com.apple.backupd: Backup completed successfully.
1/30/13 8:02:58.025 PM com.apple.backupd: Ejected Time Machine disk image.
1/30/13 8:02:58.407 PM com.apple.backupd: Ejected Time Machine network volume.
I'm backing up to a Time Capsule over WiFi. This time capsule has a total of 3 laptops that are backed up on it.Never mind. Whatever it was, it's fine now. We'll see what happens when it has to delete old backups to make space. It's down to about 720 MB free without removing old backups.
-
Issue in updating large number of rows which is taking a long time
Hi all,
Am new to oracle forums. First I will explain my problems as below:
1) I have a table of 350 columns for which i have two indexes. One is for primary key's id
and the other is the composite id (combination of two functional ids)
2) Through my application, the user can calculate some functional conditions and the result
is updated in the same table.
3) The table consists of all input, intermediate and output columns.
4) The only way of calculation is done through update statements. The problem is, for one
complete process, the total number of update statement hits the db is around 1000.
5) From the two index, one indexed column is mandatory in all update where clause. So one
will come at any case but the other is optional.
6) Updating the table is taking a long time if the row count exceeds 1lakh.
7) I will now explain the scenario:
a. Say there is 5lakh 100 records in the table in which mandatory indexed column id 1 has
100 records and id 2 has 5 lakhs record.
b. If I process id 1, it is very fast and executed within 10seconds. But if I process id 2,
then it is taking more than 4 minutes to update.
Is there any way to increase the speed of the update statement. Am using oracle 10g.
Please help me in this, Since I am a developer and dont have much knowledge in oracle.
Thanks in advance.
Regards,
Sethurefer the link:
http://hoopercharles.wordpress.com/2010/03/09/vsession_longops-wheres-my-sql-statement/ -
I,tried,using,a,trial,version,of,creative,cloud.,I,signed,up,and,started,the,download.,The ,download,was,taking,a,long,time,so,I,decided,to,cancel,it,and,buy,a,year,plan,paying,mont hly.,I,started,downloading,creative,cloud,again,but,the,download,was,interrupted,by,my,dau ghter,by,inserting,a,usb,device,into,the,usb,port.,I,could,not,find,the,download,,I,signed ,into,adobe,and,now,it,tells,me,that,i,have,a,30,day,trial.,My,account,shows,that,I,have,p aid,my,first,monthly,installment,but,i,can,only,use,a,trial,version,,which,says,will,expir e,in,30,days.,What,can,I,do,to,get,the,full,yearly,plan,version???
Jacobm51486856 please see Sign in, activation, or connection errors | CS5.5 and later for information on how to resolve the connection error preventing your membership from being authorized.
-
Sharepoint Report is taking very long time to load
SharePoint(2010) Report is taking very long time to load and display in first attempt but from the next attempt it loads and display result normally. It's urgent..please help how to troubleshoot ...
Hi Kunal,
is there multiple report viewer webpart on page? if so then SharePoint doesn't do well with multiple report viewer web parts. if possible then merge the reports in one.
Try to implement SSRS caching/ Database snapshots for reporting services, it will help you to improve the performance:
reference: http://msdn.microsoft.com/en-us/library/bb522786.aspx
Technet article to troubleshoot report performance:
Troubleshooting Reports: Report Performance
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP) -
Taking snapshot of oracle tables to sql server using transactional replication is taking a long time
Hi All,
I am trying to replicate around 200 oracle tables onto sql server using transaction replication and it taking a long time i.e the initial snapshot is taking more than 24 hrs and it still going on.
Is there any way to replicate those these tables faster?
Kindly help me out..
ThanksHi,
According to the description, I know the replication is working fine. But it is very slow.
1. Check the CPU usage on Oracle publisher and SQL Server. This issue may due to slow client processing (Oracle performance) or Network performance issues.
2. Based on SQL Server 2008 Books Online ‘Performance Tuning for Oracle Publishers’ (http://msdn.microsoft.com/en-us/library/ms151179(SQL.100).aspx). You can enable the transaction
job set and follow the instructions based on
http://msdn.microsoft.com/en-us/library/ms147884(v=sql.100).aspx.
2. You can enable replication agent logging to check the replication behavior. You may follow these steps to collect them:
To enable Distribution Agent verbose logging. Please follow these steps:
a. Open SQL Server Agent on the distribution server.
b. Under Jobs folder, find out the Distribution Agent.
c. Right click the job and choose Properties.
d. Select Steps tap, it should be like this:
e. Click Run agent and click Edit button, add following scripts by the end of scripts in the command box:
-Output C:\Temp\OUTPUTFILE.txt -Outputverboselevel 2
f. Exit the dialogs
For more information about the steps, please refer to:
http://support.microsoft.com/kb/312292
Hope the information helps.
Tracy Cai
TechNet Community Support -
Data load taking very long time between cube to cube
Hi
In our system the data loading is taking very long time between cube to cube using DTP in BI7.0,
the maximum time consumption is happening at start of extraction step only, can anybody help in decreasing the start of extraction timing please
Thanks
KiranKindly little bit Elaborate your issue, Like how is mapping between two cubes, Is it One to one mapping or any Routine is there in Transformation. Any Filter/ Routine in DTP. Also before loading data to Cube did you deleted Inedxes?
Regards,
Sushant -
Rollup in cube is taking very long time (BW 3.5)
Hi,
Rollup in one of our cube is taking a long time from what it is expected.
Previously this rollup was taking 2-3 hrs but now it is taking more than 8 hrs.
To solve this I even tried compressing the cube till last month but of no use. (this worked last year when we faced a similar issue but not sure why it wont help this time)
Through this rollup 2-3 active aggregates are filled up.
Is there any way to solve this issue.
I am using BW 3.5 version.
(PS - Can't use compress after rollup option.)Dear,
When ever you do a rollup of data to its aggregates, the system automatically deletes and rebuilds the indexes of the aggregates.
Now when you run the program SAP_RSADMIN_MAINTAIN with the above mentioned parameters the system skips this process of deleting and rebuilding the index of aggregates .
Hence you dont have to do anything manually except to rebuild the indexes of the aggregates(on the "Performance" tab when you "Administrate data targets" in the Admininistrator Workbench) once your process chain has run successfully .
So the steps should be as follows :
1) Run the program SAP_RSADMIN_MAINTAIN (One time activity)
2) Delete index (for infocube in process chain)
3) Load data into infocube (in process chain)
4) Create index (for infocube in process chain) .
5)Rollup (in process chain )
6)Rebuild the indexes of the aggregates(on the "Performance" tab when you "Administrate data targets" in the Admininistrator Workbench . (Manually) .
Note : You can always revert back the setting what you are maintaining through program SAP_RSADMIN_MAINTAIN by just filling the same parameters and slecting the Delete radio button.
Hope this helps .
Regards . -
Simple query taking so long time to run
Below are the queries which are taking very long time to run. It pulls 4 million records approx on first query.
How can it run fast?
Thank you.
SELECTPerson_DEID[CP1] ,
Admit_DT,
Discharge_DT, DRG_CD,
cast (LineAllowedAmount
AS money)
as FacAA
into
FOET
FROMdbo.mh_fac_claims_final[CP2]
group
by Person_DEID,
Admit_DT,
Discharge_DT, DRG_CD,
LineAllowedAmount;
go
select
Person_DEID,
Admit_DT, Discharge_DT,
DRG_CD, sum(facAA)
as FacAA_SUM[CP3]
from
dbo.FOET
group
by Person_DEID,
Admit_DT,
Discharge_DT, DRG_CD,
facAA;Below are the queries which are taking very long time to run. It pulls 4 million records approx on first query.
How can it run fast?
Thank you.
SELECTPerson_DEID[CP1] ,
Admit_DT,
Discharge_DT, DRG_CD,
cast (LineAllowedAmount
AS money)
as FacAA
into
FOET
FROMdbo.mh_fac_claims_final[CP2]
group
by Person_DEID,
Admit_DT,
Discharge_DT, DRG_CD,
LineAllowedAmount;
go
select
Person_DEID,
Admit_DT, Discharge_DT,
DRG_CD, sum(facAA)
as FacAA_SUM[CP3]
from
dbo.FOET
group
by Person_DEID,
Admit_DT,
Discharge_DT, DRG_CD,
facAA;
select Person_DEID,Admit_DT,Discharge_DT,DRG_CD, convert(money,sum(LineAllowedAmount)) as FacAA_SUM[CP3]
into FOET
FROM dbo.mh_fac_claims_final[CP2]
group by Person_DEID, Admit_DT, Discharge_DT, DRG_CD
There is no grouping, u are calculating 4m records in second query. Maybe try above instead (already suggested)? Can u check how long above query takes to run? -
Firefox in my Mac is suddenly taking a long time to activate, my Mac seems to block as if it were a PC
It may be some dodgy settings or plugins causing that, I would say job one is to check out your extensions, as these can cause all sorts of issues. First, disable them all temporarily and see if that fixes the problem. If it does, turn them back on in turn and see if one in particular is causing the issue. If you find one, ditch it!
If the app is still slow, I would recommend backing up all your bookmarks, and then dumping any settings associated with the app. If you don't feel comfortable doing this manually, you may want to use a tool like Appcleaner to uninstall all of the application's files, and then reinstall a fresh copy from firefox.com.
Hope that helps! -
Logining in Taking a long time
*+i'm having problem when i start my mac, there is a earth logo then followed by a folder logo with a ? mark on it after that only the apple logo appear . i never seen this 2 logo before. its taking a long time to login. is this normal? why is this happening now? please help me+*
No it's not normal. Somehow your default OS selection has been changed.
In System Preferences->Startup Disk, select the first icon which should be labeled Mac OS X 10.5.6
And by the way, please update your profile or your OS. It shows a very early version of Leopard which has some bugs that were addressed in later updates.
Message was edited by: nerowolfe
Maybe you are looking for
-
Setting up Access Manager and Directory Server for Failover.
I'm setting up 2 Access Managers AM1,AM2 and 2 Directory Servers DS1 and DS2 for failover. I've connected AM1 and AM2 to DS1. Suffixes of DS1 is replicated to DS2. Any change made to AM1 is replicated to AM2 as expected. I just patched AM1 with Acces
-
How do i sync my ipod with windows media player?
how do i sync my ipod touch 4 generation 8gb with windows media player?
-
The above error occurs when I place unique constraint on a column in a custom list. This error only occurs because the custom list has been configured to only allow creaters to view and edit their own list items. I just can't see why that should prev
-
Value display in Query designer
Hi Gurus, I have a formula which i need to create . My requirement is now, i want the value entered in the input variable to be displayed in the report (designed by query designer), but a some changed one . ex: If the input variable is for cal mo
-
Problem in OUT Parameter in the stored procedure
Hi, I have a problem in the OUT parameter of the stored procedure under the package. I encountered the error PLS-00306. Below are the codes. Package CREATE OR REPLACE package body test as procedure sp_countries(rst OUT country_typ) as sql_s