Target CPU: Use "x86" or "Any CPU"

Hello,
We are developing Windows forms application that will be deployed on Citrix servers running Windows 2008 (64-bit). We are using Visual Studio 2010 and targeting the 4.0 framework with Visual Basic as the development language. We've are incorporating logic in the applications to reference the Crystal Reports DLLs with version number 13.0.2000.0 to display Crystal Reports from our applications.
We are somewhat confused as to which Target CPU we need to reference. We've always used "Any CPU" which is the default. But we understand it the CR DLLs want to run in a 32-bit environment. So does that mean we need to build our applications to target "x86" to force the application to run in 32-bit on the 64-bit servers? So essentially we are just looking for clarification as which "Target CPU" we should be referencing.
Thanks,
Jim

I concur with Jayashree. Avoid keeping it ANYCPU.
Just clarify your query
But we understand it the CR DLLs want to run in a 32-bit environment. So does that mean we need to build our applications to target "x86" to force the application to run in 32-bit on the 64-bit servers?
No. CR 13.0 runtimes are available for 32 as well as 64 bit OS. Check the download page.
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads
Thanks,
Bhushan

Similar Messages

Unable to use debug mode for x64 application and debug doesn't work when target cpu set to x86

I am attempting to familiarize myself with Visual Basic programming in Visual Studio 2008, using the Visual Basic Guided Tour in Microsoft Visual Studio 2008 Documentation, and have run into a bit of a road-block. When following the lesson "It
Doesn't Work! Finding and Eliminating Run-Time Errors", the IDE does not allow me to edit the code when the debugger hits the intentionally programmed runtime error (divisor set to 0). It gives me an error that "Changes to 64 bit applications
are not allowed". I found some forum postings advising to set the project's Target CPU from "Any CPU" to "x86". However, when I do that, and re-execute the debug process, the debug fails to stop on the overflow/divide by
zero error.
How can I debug my programs when Any CPU/x64 target doesn't allow me to edit the code, and x86 target doesn't appear to recognize obvious runtime errors.

Hi Tim,
>>the IDE does not allow me to edit the code when the debugger hits the intentionally programmed runtime error (divisor set to 0). It gives me an error that "Changes to 64 bit applications are not allowed".
I'm afraid that the VS2008 has a limitation for this feature, I mean that Edit and Continue isn't supported on 64-bit.
Reference:
http://stackoverflow.com/questions/1498464/changes-to-64-bit-applications-are-not-allowed-when-debugging-in-visual-studio
http://blogs.msdn.com/b/habibh/archive/2009/10/12/how-to-edit-code-when-debugging-a-64-bit-application.aspx
But this feature has a improvement in VS2013 now:
http://blogs.msdn.com/b/visualstudioalm/archive/2013/06/26/debugging-support-for-64-bit-edit-and-continue-in-visual-studio-2013.aspx
So if possible, you could test it in the latest VS2013 version.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If version 6.5 does not support this configuration, do any of the later versions support it?

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I have an Ada executable that's creating a buffer of data that's being fed to a Labview executable that's displaying the data in a GUI. We're re-architecting some legacy system hardware and I'm just trying to figure out if this configuration is even possible.
Thanks

Hi,
I never heard of LabVIEW6.5. I only know of LV6i, LV6.1 and LV7.0...
Why don't you just call your next/regional NI sales rep?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If Labview ver 6.5 does not support this configuration, do any of the later versions support it?

Is it possible to run Labview version 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I basically have an Ada executable and Labview executable that currently run on a Sun Machine with Solaris as the operating system. I'm re-architecting the system hardware and will be getting rid of the Sun Machine and Solaris. I'm don't have any issues with the Ada executable, but I'm not sure what configurations Labview supports.

duplicate post
In the future, please don't try to stuff your message in the subject line. Thanks.

After closing Firefox to use IE8 or any other program, everything is very choppy and slow. I have to go into Taskbar, Processes, and close firefox.exe manually (which is using up all the memory/CPU). Then, and only then, does everything behave normally. W

After closing Firefox to use IE8 or any other program (like InterVideo to watch a DVD), everything is very choppy and slow. I have to go into Taskbar, Processes, and close firefox.exe manually (which is using up all the memory/CPU and should have closed before). Then, and only then, does everything behave normally. What is going on and what am I doing wrong or missing??
== This happened ==
Every time Firefox opened
== about a couple months ago and happens every time I close Firefox.

'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: '''[http://kb.mozillazine.org/Kill_application Kill Application]'''
'''Causes and solutions for Firefox hanging at exit:'''
'''[[Firefox hangs]]'''
'''[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit (Mozillazine article)]'''
'''[[Firefox is already running but is not responding]]'''
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox SafeMode is a diagnostic mode that disables extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes before starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. You have to close and restart Firefox after each change via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
'''''Other Issues''''': to correct security/stability issues
'''Update Java''': your ver. 1.6.0.19; current ver. 1.6.0.20 (important security update 04-15-2010)
''(Windows users: Do the manual update; very easy.)''
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.

After running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened??

I was running the newest version of Snow Leopard, and after running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened?
I really regret that I said "OK" to Software Update message... after Software Update of these updates on 7-26-11:
Migration Assistant Update for Mac
Mac OSX 10.6.8 Supplemental Update
Safari
iTunes
Remote Desktop Client Update
Now I get a message:
iTunes cannot be opened because of a problem
Check with developer to make sure iTunes works with this version of Mac OSX. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OSX.
Process: iTunes [5092]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: ??? (???)
Build Info: iTunes-10315501~1
Code Type: X86 (Native)
Parent Process: launchd [111]
Date/Time: 2011-07-26 12:08:18.568 -0500
OS Version: Mac OS X 10.6.8 (10K540)
Report Version: 6
Interval Since Last Report: 504736 sec
Crashes Since Last Report: 20
Per-App Crashes Since Last Report: 13
Anonymous UUID: B8B5EE28-970A-4E79-949B-EA2DD6E6DAA2
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @loader_path/libgnsdk_musicid.1.8.2.dylib
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: Macmini3,1, BootROM MM31.00AD.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 2 GB, SMC 1.35f1
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x90), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS543216L9SA02, 149.05 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0704, 0x24100000 / 2
USB Device: Hub, 0x0424 (SMSC), 0x2507, 0x26400000 / 2
USB Device: iMic USB audio system, 0x077d, 0x07af, 0x26440000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2502, 0x26470000 / 3
USB Device: Deskjet D4300 series, 0x03f0 (Hewlett Packard), 0x1f04, 0x26471000 / 5
USB Device: GD-0608-U, 0x056a (WACOM Co., Ltd.), 0x0021, 0x04700000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 3
USB Device: Hub in Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x1003, 0x04300000 / 2
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0307, 0x04310000 / 6
USB Device: Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x020b, 0x04330000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8216, 0x06110000 / 5
FireWire Device: unknown_device, Unknown
FireWire Device: d2 DVDRW FW, LaCie, Up to 400 Mb/sec

Same thing happened to me and I get the same error message. These are the programs that don't work
mail
keynote
pages
all Office 2011 programs
safari

I used to upload any picture to Fbook which was in my Iphoto. Now, I can only upload pictures which are a week old. I'm unable to upload any recent pics to FBook - like pics I uploaded to I photo today. They are in IPhoto, but once I on FB, and want

I used to upload any picture to Fbook which was in my Iphoto. Now, I can only upload pictures from IPhoto which are a week old. I'm unable to upload any recent pics from Iphoto to FBook - like pics I uploaded to I photo today. They are in IPhoto, but once I'm on FB, and want to upload, they aren't available to choose. Help? Thanks! Louise

thanks for replying.
the booting and walking away and then attempting to browse and clean method is what i've been trying to do. it won't let me drag and drop and just freezes up and goes to sleep after 2 minutes. it's a never ending battle with very few results. which is why i questioned the method of just restoring the hd from a time machine backup.
do you think restoring the hd from time machine will resolve the issue with all pics on the desktop? and everything will be as it was from the date i restore it from? sorry, as you can tell, i'm not overly computer savvy.
i have a really old desktop mac...i can try connecting the two...how does one boot a mac in 'target mode'?
as for the iphoto cleaning and organizing issue...that is what i was trying to accomplish with importing them to a folder. was going to browse and clean from there...but somehow imported to desktop which is what's complicating everything. once i get them off the desktop i can work on the iphoto issue...which as i mentioned...i didn't take 45,000 pics...i've just taken about 4,500 over the last few years, and they are being duplicated in iphoto. this was my attempt to clean it out entirely and start over. it will basically be a lot of deleting.
one problem, seems to lead me to more...which is just my luck. :-)
thanks again, for your help.

Can you get an iphone 5 at target that uses AT&T or Verizon network and use the Straight Talk plan from Walmart?

Can you get an iphone 5 at target that uses AT&T or Verizon network and use the Straight Talk plan from Walmart? I don't have AT&T or Verizon network and I don't want to get them but I was just wondering if you can get the iphone 5 that is at target and use it for the straight talk plan. I will be getting the straight talk plan but I would like to do some research on the iphone 5 first for straight talk. At walmart the phone is $544.99 and I think it will be a lot cheaper to buy it at target.
Thank You!

When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

How to load data dynamically into target tables using files as a source

Hi ,
My scenario needs a single interface to load the data of 5 different files into five target tables using a single interface. All target tables have the same structure. It is possible to point to variable source files using ODI. But the same approach is not working with Database tables. I am getting errors while trying to make my target /source table as a dynamic one.
Can anybody suggest anything. The last option would be writing a dynamic PL/SQL block in the KM. Any other suggestions friends ?
Regards,
Atish

After creating a pair of identical source and target tables, I have carried out the following steps:
I am trying just keeping the target as variable
a)created a one to one interface,
b)tested that it is running.
c)created a variable(type =text),
d)used the variable as #v_name in the resource of the target table datastore.
e)in a package used the variable in a set variable step (first step).
f) used the interface as the second step.
g)executed the same in my context.
the <project_code>.variable_name is not getting substituted in the sql_code that is generated by the KM. My KM is SQL Control Append and following is the code that it generates in the Insert into I$ step:
/* DETECTION_STRATEGY = NOT_EXISTS */
insert /*+ APPEND */ into HR.I$_JOBS_COPY1
 JOB_ID,
 JOB_TITLE,
 MIN_SALARY,
 MAX_SALARY,
 IND_UPDATE
select
 JOBS.JOB_ID JOB_ID,
 JOBS.JOB_TITLE JOB_TITLE,
 JOBS.MIN_SALARY MIN_SALARY,
 JOBS.MAX_SALARY MAX_SALARY,
 'I' IND_UPDATE
from HR.JOBS JOBS
where (1=1)
and not exists (
 select 'X'
 from HR.#PLAYGROUND."v_tab_name" T
 where T.JOB_ID = JOBS.JOB_ID
 and ((JOBS.JOB_TITLE = T.JOB_TITLE) or (JOBS.JOB_TITLE IS NULL and T.JOB_TITLE IS NULL))
 and ((JOBS.MIN_SALARY = T.MIN_SALARY) or (JOBS.MIN_SALARY IS NULL and T.MIN_SALARY IS NULL))
 and ((JOBS.MAX_SALARY = T.MAX_SALARY) or (JOBS.MAX_SALARY IS NULL and T.MAX_SALARY IS NULL))
 )

OBIEE to properly query tables in target schema using "Mixed_Case" names

We encounter the following error when using the BI Administration tool (to update a row count of a physical table) or the Analysis tool (to run a query) 11g against our target schema:
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
SQL Issued: SELECT 0 s_0, "OTM"."Cheese"."Cheese" s_1 FROM "OTM" FETCH FIRST 65001 ROWS ONLY
The reason for this error seems to be that our target schema contains tables that have quotes in the name when the table is created, which I understands enforces the preservation of letter case-- in this case Mixed_Case names. Since this is not "our own" application, we don't really have any control over how the schema is created or the table/views named. Interestingly enough, the table appears in the BI Administration with the expected columns though the querying for rows count and data fails.
One way we've worked around this is to manually create a VIEW of the table of interest in the target schema using all capitals. This works, but seems unnecessarily messy, especially if we are interested in using a VIEW that is already created as part of the schema.
I have found the following various discussions about setting the NQSConfig.ini file on line, but changing the value and restarting the OBIEE server doesn't seem to make a difference.
# Case sensitivity should be set to match the remote
# target database.
CASE_SENSITIVE_CHARACTER_COMPARISON = ON;
Are there other ways to get OBIEE to recognize mixed-case table names?

BI Admin: Physical / Database / Features tab / (scroll to bottom or use Find) IDENTIFIER_QUOTE_CHAR: set this to a double quote: "

What type of Data target is used when the safety interval is used?

Hi ,
what type of Data target is used when the safety interval is used in generic delta in datasource?DSO or cube or cube?
Pls explain me ?
Thanks,
Nimai

It's up to your reporting requirement to go for dso or cube..
I prefer to having staging with DSO and then further reporting on Cube ..
It's always easier to manage when you have any changes to the cube .. you need not to extract data from R/3 .. if you have dso you can extract directly to cube
Another thing is -for any reason some of your records got corrupted so you can have full loads to dso which has the overwrite functionality... and sends delta records to cube. even in cube you can do selective deletion but we have to very careful to avoid double records in next loads
Edited by: Srinivas on Jul 29, 2010 8:23 PM

When I click on a file to view in Finder in the view as columns, Finder stops responding. If I use Finder in any of the other views, I don't have an issue.

When I go to finder and view as columns so that the right column will open a preview of the file, I get the endless spinning graphic and when I go to Force Quit, it shows that Finder has stopped responding. When I use Finder in any other view mode, I don't have that issue. This just started today. As far as I know, I haven't done any updates today that would cause the issue. I've restarted a few times. I'm running 10.10 on iMac (27-inch, Mid 2011). I when to updates in the App Store and saw there was an update for 10.10.1 and tried to run it twice now. It starts to install and says I have 7 minutes left and then at about 3 minutes, it just opens all my windows again and acts normally. When I go to "About this mac", I'm still showing 10.10 as the OS. Also, in the App Store, when I click on updates, it shows me 4 updates that I've already installed as ready to install. Not really sure what's going on nor why all the sudden this is an issue, but I use the preview mode in Finder all the time so I would love a fix for this. I've tried logging out and logging in as another user and the same issue with Finder happens with other users as well. I've emptied my trash bin as well.

Step one is to log into a newly created admin user account and see if the problem persists.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with "server not responding" Can somebody give me a solution for this ?

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser. I have tried restore option also. This is happening with both Wlan and Data con. too
Please help...

I do not really know much about this kind of problem, but i may be your internet connection.
If you are on your own #G network then:
Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
Then wait patiently until you get a good connection and then try again.
If you are on a nearby Wi-Fi connection then:
Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
If all else fails, then you need to contact your provider for assistance.
Sprint:888-211-4727
AT&T:?
Verizon:?

FaceTime: I have a iPad, iPhone, iMac all on the same apple Id/account. Without changing id/email address can I use FaceTime between any 2 of my devices? It works from iPad to iPhone but not the other way??? I would like talk/see my kids if am away

FaceTime: I have a iPad, iPhone, iMac all on the same apple Id/account. Without changing id/email address can I use FaceTime between any 2 of my devices? It works from iPad to iPhone but not the other way??? I would like talk/see my kids if am away.
Hope you can help.
I have added a new email address but kept my Id, but I get busy when trying from iPhone to iPad as they are clashing. Like find my iPhone app hence trying to keep them all on one account

IOS: using facetime http://support.apple.com/kb/ht4319
using an ipad will use the email address since you can't make a phone call. see the link.
Your basically calling/emailing yourself that's why your getting a busy signal.

I need to pass value for Actual GI date field in VL01N t code, I am using BAPI_DELIVERYPROCESSING_EXEC. can any one tell me how can i pass vaule ?

I need to pass value for Actual GI date field in VL01N t code, I am using BAPI_DELIVERYPROCESSING_EXEC. can any one tell me how can i pass vaule ?

Hi Abdul,
Sorry for my unprecise answer, but you talk about a tcode, but you're using a BAPI Call. Maybe you want to call the transaction in batch mode?
http://help.sap.com/saphelp_erp60_sp/helpdata/de/fa/09715a543b11d1898e0000e8322d00/content.htm
Regards,
Franz

Target CPU: Use "x86" or "Any CPU"

Similar Messages

Maybe you are looking for