Task blocked on the flow - Why ?

Hello,
I created a work flow:
1.first task is send a mail (start mail)
2.after there's a wait for event task
3.finally there's a task to send a mail (end mail ) - This task is equal at the first task
When I test this workflow, the first mail is sent, after the flow waiting for event. I create the event, and the flow continue (I can see it by the protocol) but when is arriving a the last task (end mail), the mail is not sent.
Why ???

Hello Suse,
tks for reply ...
I solved the problem, it was a wrong connection between task ...
Anyway I have another problem on workflow (I'm new on this subject), so please I thank you if you reply at my following post:
How put abap code on workflow ?
tks.
Roberto.

Similar Messages

I have assigned standard task as General Task in agent assignment but why there is a red flag beside the agent assignment property in task property like the image below?

I have assigned standard task as General Task in agent assignment but why there is a red flag beside the agent assignment property in task property like the image below?

Hi Atiq
Now that's concerning.....!!!
This error usually shows up when the workflow is not able to resolve the outcome of the decision....no branch is there for the selected decision.
Since, the standard workflow is also going in an error....this is something wrong...
Did anyone play around with the standard decision task?
I am not sure if this will help, try generating the task and standard workflow by executing the FM SWD_WFD_REPLICATE_FROM_9999 from SE37 directly. First, generate the task (give full task ID TS00008267 as the input and execute; and then the standard verification workflow in the next exec).
Try and test again...if this works, generate your custom workflow again like this.
The above is a pure guess and I am not sure if this will work.
Regards,
Modak

Trying to find answers for the question "Why is this file type blocked from being uploaded into SharePoint"

At least once a month - sometimes much more frequently - I get calls from users asking why the file extension they "need" to upload to SharePoint is blocked.
Most recently, it was a Microsoft Access database that the user was attempting to upload to a document library. Before that, it was a shortcut link (*.url). And so on.
Is there a reference document which goes over the reasons why specific file types are blocked?
Thanks!

Each blocked file format has it's own reasons for not being allowed to be stored on a SharePoint library.
Some of them are blocked because they would be processed by SharePoint Servers during the upload/download sequences, thus, possibly corrupting the system ( like dll files ). Others would cause Crawl to break ( url files ).
The Access database files are blocked for two valid reasons. First, because saving "live" to those files using Windows explorer window ( WebDAV ) doesn't work. Second because SharePoint product managers want us to use SharePoint lists instead.
And it does makes sense.
If you're in the middle of a migration from file servers to a SharePoint solution, your people could use these situations to stop and think about it for a little:
Really ? Now that we have SharePoint, couldn't we do things a little bit differently ?

I received my Ipad today, but why got black color block on the top of Ipad? The look is diference from Apple website!!

i received my Ipad today, but why got black color block on the top of Ipad? The look is diference from Apple website!!

Hi,
You might have the WiFi + 3G version of the iPad.
This means you can put a SIM card into the iPad and get the internet where you get mobile coverage.
Does the black box you mentioned look like this: http://images.apple.com/ipad/specs/images/ipad_3g_20110302.png
Regards,
Tim

Why does my mac when i try to format my stick say that unable to write to the last block of the device

i bought a new mac with osx lion 10.7.why does my mac when i try to format my transcend 8 gb stick in disk utility say that it is unable to write to the last block of the device?please help me

This may or may not work, but it's worth a try.
Using Disk Utility, try an re-partition the drive into two partitions, making the second partition very small (a megabyte or two), then see if you can format the first partition normally. Leave the second partition alone.
If this works, then the first partiton is what you will use.

The FLOW isn't parallel - why?

The BPEL process starts out with three parallel flows. Each flow makes (1) a database access, (2) Using aswitch determines it is appropriate to proceed, (3) Invokes a Asynchronous process, (4) Receives the result of the process, then all three flows join. All three flows were originally using the same partnerlink to the Asynchronous process. I tried giving one of the parallel paths a separate partnerlink, but that didn't change anything.
When I look at the initial process flow in the BPEL Manager the initial couple of activities are shown in each flow's parallel path. One of the flows has invoked the Asynchronous process and is now waiting on its corresponding receive activity. The other two flows are not proceeding beyond the switch.
If I inject the required signal for the flow waiting on the receive, it proceeds beyond the join of the three parallel paths and into the next scope. In other words it doesn't wait for the other two paths to complete.
Can someone suggest what could possibly be wrong?
I tried adding a property to the Asynchronous process partnerLink, *<property name="nonBlockingInvoke">true</property>*, but that caused the invoke to blow up. I assume that property is not appropriate for an Asynchronous process.

Perhaps you have a correlation issue. If the same process invokes another process from multiple flow activities it needs to know which branch that should receive a given answer. I'm not sure how the built-in correlation with WS-Addressing works, but perhaps it cannot handle this?
You could try content-based correlation and see if that helps you. You could also move the code that does the invoke and receive to a separate synchronous process and use it (you may get timeouts in real life, but for testing it should be fine). There would then be a one-to-one mapping between the calling and called process.
I may be totally wrong here, but at least it is easy to try :-).

Why does siri block out the entire screen?

And is there any solution to this ios7 problem?
WWhen is run into something to search for, phone number/name/model number....etc. that I could not just click on to search for or problematic or impossible to copy, I would bring up siri and then read off the word/model/ number to search with siri. Siri did not block out that information. With ios7 it is blocking out the information I need to input with siri. Is there any solution to this new problem or am I just screwed with the new ios7?

Thanks, you're my hero! :-)
The problem wasn't about the Restricitions because they are really irrelevant. The Problem was that i didn't had this Option to turn Siri off in the Touch ID & Passcode-Menu because i had to activate Siri first.
Here ist the way to deactivate Siri in the locked Screen:
[1] Settings > General > Siri > turn Siri on
[2] Settings > Touch ID & Passcode > ALLOW ACCESS WHEN LOCKED > turn Siri off

Payment Block at the time of FB60

Hi
I want to have payment block flowing directly in FB60. I shud not enter manually
So what i did:
I went to OBA3. There i defined tolerance group and i gave payment terms as 0002
In that payment terms, i have given payment block key A
But when i did FB60, i saw no payment term and payment block is populated at vendor line item. Let me know the reason why it didn't flow to vendor

Please check, that you are giving that tolerange group in the vendor master in FK02 > Company Code Data > Accounting Information. Also the payment term assigned in OBA3 is used only for residual item creation in F-44.
To fetch the payment block in FB60, you should assign the payment term (having payment block in OBB8) in the vendor master in FK02 > Company Code Data > Payment Transactions.
Regards,
SDNer

Error while checking the flow of bpel process in bpel console

Hi Experts
I have created one bpel process which invokes task manager for approving or rejecting the leave request. I ve successfully deployed the bpel process and also able to test approve or reject the leave request . But i am facing one error
when i am initiate a bpel process and started to check the flow of that bpel process in bpelconsole it gives me some error message in small pop up like
error : Internal/ bug ( #589 )
\u017E is not defined
i click Ok and after this no error and all working well.
Thanks.

A quick answer is:
1. make sure you defined the Application/Integration Server in your developer (user/pass you have - if not oc4jadmin then one the IT gave you).
2. Deploy your project to that server.
3. Choose the correct domain in the Console when deploying.
Is this what you wanted to know???

Script task error during the creation of partition by reading a table and using AMO - SSAS 2012

Hi,
I need to create SSAS (tabular) and process partitions in an authomatic manner. Moreover, the partitioning is respect to a category, an year and a month.
Category, year and month are resident on a table to read to create the SSAS partitions.
So, in a SSIS pkg:
a. I've created a data flow task to read the SQL Server table having category, year and month data,
b. I've connected the output of the ole db source as the input for a recordset destination, associated to an object variable,
c. I've used a for each loop container (ado enumerator) specifying the object variable and three variables, for category, year and month,
d. inside the for each loop container I've created a script task using AMO (visual basic) to control for any existing partitions, if not presents to create the new ones and then to process them.
For the first iteration, a new partition has been created and processed successfully, but then, for other category, year and month values the script task fails. I've controlled the code many times and I've tried to put returning messageboxes but I've found
anything. The error is a generic one and no other info are returned.
Well, any suggests to me in order to solve this issue, please?
Many thanks

Hi, thanks, I've solved adding to the code end the SSAS server connection termination.
Bye

How do I access a value of a variable in SSIS and control the flow accordingly based on its value?

So I have a Foreach Loop Container that Enumerates a read Excel spreadsheet and this Foreach Loop get its User::SheetName. Can I change my flow accordingly based on the value of the User Variable User:SheetName that is dynamically valued by the Foreach Loop
Container? So if the User::SheetName is "Enrolled", I want to load that worksheet to a certain SQL Server Table using an Excel Source and OLE DB Destination and if the User::SheetName is "Engaged", I want to load its worksheet contents
to a different SQL Server Staging Table. What Task can I use to determine the value of User::SheetName or am I going to have to write a C# script to do this?
Any help and/or suggestions are GREATLY appreciated.
Thanks!

Hi ITBobbyP,
According to your description, you want to read data from excel by using the Foreach Loop container with the appropriate enumerator. If that is the case, please refer to the following steps:
Inside the ADO NET enumerator, add a data flow task.
Inside the data flow task, add an Excel source.
Open the Excel source, and point to the Excel data source set up in the file enumerator.
Select one of the sheets that shows in the drop down.
Close the Excel source.
Select the Excel source.
In the properties window, copy the name of the sheet you selected. It's in the 'OpenRowset' property.
Set this as the initial string in your sheet name variable created to gather the sheet name from the ADO NET enumerator.
Select the Excel source.
In the properties window, change the 'AccessMode' to OpenRowset from Variable. This will change the property 'OpenRowset' to 'OpenRowsetVariable'.
Change the 'OpenRowsetVariable' to the variable created to hold the sheet name via the dropdown.
Open the Excel source. You should see your variable as the sheet name.
Click the 'Columns' tab to verify you can connect and mess with columns.
For detail information, please refer to the following document:
https://technet.microsoft.com/en-us/library/ms345182.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

While using Skype on my mac pro the screen freezes and splits in two and the left hand side shifts to the right and the right shifts to the left with a large black block down the centre, should I take it back to store as it is only a month old??

I have only had my mac one month and it seems while I use Skype the screen freezes and I cant click on anything and everything on the right hand side of the screen shifts to the left and the left to the right with a back block down the centre and sometimes lines running down the screen over all. As it is almost brand new should I be going back to store to get this problem fixed??

Yes. You are still under warranty. Why waste it?

Help required in understanding the flow of control in working with EJB 3.0

*1. Can anyone help me in understanding the flow after getting an object of InitialContext in using Stateless/Stateful in EJB 3.0 from client i.e. what we are getting in the step Object ref=jndiContext.lookup("CalculateBean/Remote) .*
*2. What is the use of INITIAL_CONTEXT_FACTORY*
*3. PROVIDER_URL*
*4. Java.naimg.factory.url.pkgs*
*5. why org.jboss.naming and org.jnp.interfaces separated by semi colon.*
*6. Why we dont require INITIAL_CONTEXT_FACTORY, PROVIDER_URL and Java.naming.factory.url.pkgs if the client is a web client.*
Properties p=new Properties();
          p.put(Context.INITIAL_CONTEXT_FACTORY, "org.jnp.interfaces.NamingContextFactory");
          p.put(Context.PROVIDER_URL,"jnp://localhost:1099");
          p.put("java.naming.factory.url.pkgs","org.jboss.naming:org.jnp.interfaces");
          Context jndiContext = new InitialContext(p);
     Object ref = jndiContext.lookup("CalculateBean/Remote");
Calculate c = (Calculate)ref;
int sum=c.add(3,4);
System.out.println(sum);
Thanx in advance........

Annotations can also be processed at run time using the core reflection API (java.lang.Class & java.lang.reflect.*), so you might want to explore down that path. I have no idea how JBoss actually does it, but annotation processing at build time and core reflection at runtime are the two most obvious possibilities.
Bruce

Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).

Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
Naveen

Your calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.

[Execute SQL Task] Error: Executing the query failed with error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION."

I have an package with source , data flow and destination to execute on begin and commit.
in the below i have just used for questioning purpose with diagram removing my Data Flow task explaining my problem
on execution, i get error as
[Execute SQL Task] Error: Executing the query "COMMIT TRAN DimCompanyCode" failed with the following error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.". Possible failure reasons: Problems with the query, "ResultSet"
property not set correctly, parameters not set correctly, or connection not established correctly.
as mentioned , i have checked the ResultSet, parameters , connection establish.. all are fine.
Kindly advice on what has to be done.
ShanmugaRaj

To avoid this error, the RetainSameConnection property should set to 'True' for the Connection Manager - Application_DB.
Narsimha

Task blocked on the flow - Why ?

Similar Messages

Maybe you are looking for