How do I access a value of a variable in SSIS and control the flow accordingly based on its value?
So I have a Foreach Loop Container that Enumerates a read Excel spreadsheet and this Foreach Loop get its User::SheetName. Can I change my flow accordingly based on the value of the User Variable User:SheetName that is dynamically valued by the Foreach Loop
Container? So if the User::SheetName is "Enrolled", I want to load that worksheet to a certain SQL Server Table using an Excel Source and OLE DB Destination and if the User::SheetName is "Engaged", I want to load its worksheet contents
to a different SQL Server Staging Table. What Task can I use to determine the value of User::SheetName or am I going to have to write a C# script to do this?
Any help and/or suggestions are GREATLY appreciated.
Thanks!
Hi ITBobbyP,
According to your description, you want to read data from excel by using the Foreach Loop container with the appropriate enumerator. If that is the case, please refer to the following steps:
Inside the ADO NET enumerator, add a data flow task.
Inside the data flow task, add an Excel source.
Open the Excel source, and point to the Excel data source set up in the file enumerator.
Select one of the sheets that shows in the drop down.
Close the Excel source.
Select the Excel source.
In the properties window, copy the name of the sheet you selected. It's in the 'OpenRowset' property.
Set this as the initial string in your sheet name variable created to gather the sheet name from the ADO NET enumerator.
Select the Excel source.
In the properties window, change the 'AccessMode' to OpenRowset from Variable. This will change the property 'OpenRowset' to 'OpenRowsetVariable'.
Change the 'OpenRowsetVariable' to the variable created to hold the sheet name via the dropdown.
Open the Excel source. You should see your variable as the sheet name.
Click the 'Columns' tab to verify you can connect and mess with columns.
For detail information, please refer to the following document:
https://technet.microsoft.com/en-us/library/ms345182.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support
Similar Messages
-
How do I show my keynote file on a dvd player and control the slides?
how do I show my keynote file on a dvd player and control the slides with the skip or next chapter command on the dvd remote? when I export to quicktime, it changes slides on a timed basis. I want the chapter button on a dvd remote to act like a mouse click would.
Hi Robert
You have to export the individual slides from your Keynote presentation, and then import them into your DVD application.
I use DVDStudioPro - it works fine this. I'm sure iDVD will be OK.Going via QT has never worked for me.
Regards Robert
G4(7 y.o)1.5GHz 1.25 GB Ram, 2x120GB intHD, orig AGP & Radeon 9200 PCI card Mac OS X (10.4.8) 2monitors, CRT TV, FCP5.0.4, DVDSP4.1.1, STP1.1, Comp2.3, LT2.1, QT7.1.3 -
how can i access to iCloud to my iphone because it appear to the screen of my iPhone when i try to access my iCloud that the maximum number of free account have been use already please help me
Welcome to the Apple community.
Once three iCloud accounts have been created on any iOS device, it can you no longer be used to create any more accounts, regardless of what you do to it. You will need to use a computer or another iOS device to create your account and then use the details to log into your account on your phone. -
Changing display of item in column based on its value
Hi,
I'm confused as to how I can change the display attributes of an item in a column based on that items value. I've grepped through the forums and it seems there are ways to do this in the report query but that seems inefficient. My preferred method would be at the column level, I could set up some logic that says "if the value is X then display A and if the value is Y then display B". In this case A and B could be a snippet of HTML to display an image that represents the value.
Seems reasonable that this app would have this functionality and I'm sure it's there, I just can't seem to find it.
Help! Suggestions welcome, heckling encouraged!
Thanks,
JonJon,
You should probably start storing the images in a custom table as described here:
http://www.oracle.com/technology/obe/apex/apex31nf/apex31blob.htm
The following column is taken from the Products query in the sample application (page 3):
decode(nvl(dbms_lob.getlength(p.product_image),0),0,null,'<img src="'||apex_util.get_blob_file_src('P6_PRODUCT_IMAGE',p.product_id)||'" height="75" width="75" />') img
Note, getting this configured is a little tricky the first time. Notice that there is an item from page 6 referenced. Page 6 contains that item and a DML process both of which are needed for everything to work. Read more here:
http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e10499/advnc.htm#BCGGJHEF
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen -
To get the details according to run time value
Hi Experts,
I am getting one interactive adobe form for printing flight details according to the carrid.
If I am changing the carrid value at runtime I want to get all the details according to that value.
How can I do coding for that?
Thanks in advance.Hi Experts,
I am getting one interactive adobe form for printing flight details according to the carrid.
If I am changing the carrid value at runtime I want to get all the details according to that value.
How can I do coding for that?
Thanks in advance.
Please reply me..
There is one error showing while i am using web service.."error attempting to read from file" -
After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?
Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?
-
my ipod touch is 3rd gen how can i update my ios from 4.2.1 to 5.1.1 when i shift + restore and load the ipod3_5.1.1.ios its always say your firmware is not compatible
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318. -
I purchased bioshock 2 on the app store on my macbook pro (running lion) and it shows 'an error has occured' every time I try to download the app. How do I install it properly, I have restarted my mac and reset the app on the debug menu?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
How do I make a DVD copy of a file? And does the file have to be converted from mpeg or mp4 or.MOV to a different format before it can be copied and is readable by DVD? Thanks.
Great hearing for you all! I thought I was all alone this past weekend. I did learn a lot this weekend. I really like the InDesign product.(half-the-battle) But to be helped by the prestigious “Sandee Cohen” was an honor indeed.” I ordered the InDesign CC today. Peter, I appreciate all the feedback on Lynda too. They are loaded with lots of good videos. Derek too honed in on one of the most important aspects! Since I have been working with Word for most of the first portion of the book this will be a big help. I looked at the comments big help ! Thanks a ton ALL! Have a wonder day or evening whenever you read this reply.
-
hi all
It would be appreciated if any one let me know how to edit
bitmap which is imported in flash using xml and save the edited
bitmap back to xml in flash.
Is it posible to save the bitmap data in flash?
thanks in advanceYes you can... but like I said before you need to upload the
data from the changes you make to a server.
In terms of the solution... its unlikely that you'll find one
specifically for your needs. You will have to learn whatever you
don't know how already and maybe adapt some existing examples to
your needs.
To change the visual state of a movie clip... you just do all
the regular things that you want to do to it using flash... scale,
rotation, drawing API , textfields etc in actionscript. If you
don't know how to how to do that stuff, then you need to learn that
first. That's basic actionscript.
You can capture the visual state of a movieclip using the
BitmapData class. That includes a loaded jpeg. You can also
manipulate bimatp data using the same class. You should read up on
that if you don't know how to use it or check out the examples
below for uploading info.
For uploading to the server:
Here's an as2 solution that took 15 secs to find using
google:
http://www.quasimondo.com/archives/000645.php
If you're using as3, google search for "jpeg encoder as3" and
look through that info. There are also historical answers in the
forums here related to this type of thing that might help as
well. -
How can we a validate a CSV file in SSIS and log the error details in another CSV File by using Sript Task.
Please see:
http://www.bidn.com/blogs/DevinKnight/ssis/76/does-file-exist-check-in-ssis
http://social.msdn.microsoft.com/Forums/en-US/01ce7e4b-5a33-454b-8056-d48341da5eb2/vb-script-to-write-variables-to-text-file -
How can I archive photos in iPhoto to a hard drive and retain the Album folders and the Events? I tried to Export the Albums but just transferred the files individually.
If you want to maintain the iPhoto organisation then back up the iPhoto Library.
If you want to export to the Finder, well you need to create a folder for the contents of an Album and expot to that.
If you have an older version of iPhoto: Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events. This feature is built in to iPhoto 11.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue. -
How to send a text message to a group of people and save the list for next time?
how to send a text message to a group of people and save the list for next time from an iphone 4s?
Hey there ipremacha,
It sounds like you need to enable Text Message Forwarding on your iPhone for your iPad to send MMS/SMS messages through your phone.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity
Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
Thank you for using Apple Support Communities.
Regards,
Sterling -
How can I select several emails from 3900 on my 5c and delete the rest easily
How can I select several emails from 3900 on my 5c and delete the rest easily
We'll I don't think there's a easy way to delete a lot of emails besides deleting all of them. To delete all of them click on inbox them edit then "mark all" then trash/delete. Other than that you will have to specifically deleted the ones you want to delete.
-
How do I kno d cost of my iPhone 5?and also the country to which it belongs to?!
How do I kno d cost of my iPhone 5?and also the country to which it belongs to?!
These are the prices, if purchased from an official source:
http://store.apple.com/ae/buy/home/shop_iphone/family/iphone5?product=IPHONE5
And, if purchased from an official source, the origin is UAE.
Maybe you are looking for
-
Have mac pros with 1tb drives in tem. Trying to figure out imaging via deploy studio.
-
I can open audio files but can't find them with Finder or Spotlight.
Hello! I wanted to delete a few songs and found that by searching in Finder or Spotlight they couldn't be found. I can open the files in Finder by opening iTunes, ctrl clicking the song and selecting 'view in Finder'. If I then 'get info' on the fil
-
FINALLY, iTunes Store Working
I have been dealing with Apple, my DSL and Norton for over a month about iTunes Store not loading and telling me I don't have a connection when I did. I went through all the threads etc and Apple and Norton were helping me. I am a teacher and my tech
-
Create PDF export in landscape mode
Hello! I am searching for a possibility to export a Xcelsius 2008 presentation to PDF in landscape mode. All exports are in portrait mode and I can`t find any settings within Xcelsius 2008 to change it. Does anyone know how to do it? Thanks in advanc
-
Maximum encrypted message size
Hi all, What is the largest size message that can be encrypted by the IronPort ESA PXE engine? Is this a configurable parameter? Thanks very much, - Steve