Tax code in CIN(country india version)

A tax code is created in the juridiction code IN00 with A/P BED as 16.32% (cindition type JM01) and A/P CST as 4%(condition type JIP1).When it is used in the purchase order in the tax simulation it is taking the BED as 0% (even though it is mentioned as 16.32%) and CST it taken as 4% (as it was mentioned in the tax code). Why the system is taking the condition as 0% even though it is created as 16.32%.The tax procedure used is TAXINJ.

hi Elanchezhian,
    Thanks for answering my issue.
  Yes i maintained the excise rate as 100% .And for the CENVAT determination i made the entry of this material as input material Please note that the output material is not excisable so i kept the output material as blank in the CENVAT determination.Even then also i am facing the same problem.

Similar Messages

  • CIN (country india version patch)---where i will get

    Hi,
    what is 'CIN (country india version patch), 
    my system is R/3 IDES 4.7 on NT & SQL,
    where i will get, what will be the patch format?
    kindly help me
    Regards,
    swathi-k

    Hi,
    For your version of SAP, you may need to have SAP IS-U LOCIN 100
    It is available at http://service.sap.com/swdc
    select 'Search for all Categories' and put CIN in the search text and hit search , you should be able to get all kinds of existing CIN versions.
    Check the following notes:
    950514 - Overview Note
    950350 - Release Strategy (Delivery Dates)
    950511 - Installation note
    950513 - Support Packages
    Regards,
    Siddhesh

  • CIN country india version how to create

    hi export
    i have a problem with country india version ,i don't know how to create it ,what are the step also ,
    please help.
    thanks
    Sama

    HI Sama,
    Please go through this Link
    http://www.sap-img.com/sap-sd/sap-sd-cin-configuration.htm
    Regards,
    Ninad Kshirsagar

  • CIN- Country India Version

    Hi all,
    I need to understand CIN from the Start any basic Document would also help to understand the concept. Please mail me any good and relevent documents related to CIN which could be understood from the grassroot level. Good Documents would be rewarded with points.My e-mail id is [email protected]
    Regards
    Atul

    Hi ,
    Find CIN Settings
    CIN Config Settings:
    Basic Settings:
    1. Maintain Excise Registration - ECC No., Excise Regn No., Excise Range, Excise Division, Excise Commissionarate, AED App check mark, No. of lines items per excise inv, etc.
    2. Company Code Settings - Accounting Doc for Cenvat, Accounting Doc for Utilization, Rounding Rules, Exchange Rate Types for Domestic and Exports Transactions, Subcontracting Period, Financial Year, etc.
    3. Plant Settings: Assigning Excise Registration to Plants, Maintainting Plant as Factory or Depot.
    4. Maintain Excise Gp: Maintaining and assigning Excise Gps to plants, Defining plant as depot
    5. Series Gp: Maintaining Series Gps for various number range requirements.
    6. Excise Duty Indicators: Maintained Excise Duty Indicators which will be later assigned to Customers.
    Basic Settings/Determination of ED:
    1. Assign Tax Calculation Proc. to Country IN: TAXINN
    2. Maintain Excise Defaults: Assign A/R BED & ECS Conditions
    Master Data:
    1. Maintain Chapter ID FG Materials
    2. Define Form Types - Concessional Sales form which can further be tracked.
    Account Determination:
    1. Define Tax Codes - FTXP (You can also define these in Financial A/c->Finacial A/c Basic Settings->Tax on Sales/Purchase->Calculation
    2. Define Transaction Type in OBCN (JN6-VAT AND JN7-CST) and Assign G/L Accounts against tax codes.
    3. You have standard Excise Transaction Types and can define sub-transaction types as per requirements.
    4. Assign Debit or Credit Indicator to different Excise Accounts vis-a-vis Excise Transaction Type. Eg: with DLFC, BED and ECS will get debited and Cenvat Suspense will get credited.
    5. Assign G/L Accounts per Excise Transaction for Excise Accounts such as BED, ECS, PLA, etc.
    6. Similar assignments are required if you are using sub-transaction types for certain processes.
    Business Transaction:
    1. Assign Delivery Types to Billing Types.
    Exports Under Excise Regulation:
    1. Maintain ARE1 Settings for Number of copies to be printed, output type, etc.
    2. Similarly make settings for ARE3 under deemed exports. Basically counter signed copy from Custom's is required to be able to declare the completion of export/deemed exports which becomes a ref for excise authorities.
    3. You can maintain Excise bonds/licenses here
    4. Printing ARE Docs: Configure output type for AREs here and default the printers.
    5. ARE Transaction Processing..can manage what T.Codes should have what all authorizations and referecing of ARE Documents while changing/displaying/updating/posting, etc.
    Utilization:
    1. Here you define the accounts to be debited during Fortnightly Utilization of Cenvat, basically Input A/c and %.
    2. Under Excise Register you can assign SAP Script to specific registers and the T.codes.
    Tools:
    1. Number Ranges: You can manage excise number ranges here for Factory/Depot/Exports/AREs, etc.
    2. Message Control: You can manage CIN messages here in terms of info/warning/error.
    Important SD Master Data for users:
    J1ID, J1ILIC01, J1IBN01
    Important SD Reports:
    J1I2, J1IDEPOTSTOCK1, SE38 (RFUMSV00), J1I7, J1I5&6, J1IIEXCP AND J1IUN
    Important Tables:
    J_1IEXCHDR, J_1IEXCDTL, J_1IMOCUST, J_1IFRDTSO
    REgards,
    Sarosh

  • Part I and Part II not updating in MIGO..about CIN( Country India Version)

    Hello,
    This is regarding Part 1 and Part II is not updating in MIGO.
    Case 1
    step1 : Doing ME21N.
    step 2 : Doing J1IEX ( Capture)
    step 3 : Doing MIGO ( Giving reference of posted Invoice)
    step 4 : Doing Invoice
    Step 5 : Posting J1iex.
    Step 6 : Trying to View Patrui and Part II tab in MIGO
    unable to do so.
    Case 2
    step1 : Doing ME21N.
    step 2 : Doing MIGO ( Capture and Post Excis Invoice)
    Step 3 : Doing MIRO.
    Step 4 : I am able to view Excise tab in MIGO.
    Could you able to answer why it is not updating MIGO? and how can we resolve this.
    Thanks & Regards
    Sudhansu

    Hello,
    Case1:
    1) In you first case you were capturing the excise invoice  before MIGO, so it means that you are only capturing the excise no Part1 and part2 entry.
    When you go to MIGO with ref to excise Invoice (In excise tab) then system will update both Part1 and part2 entry.
    so you can check these entries in J1I7 t.code.
    Note:Once your GR is saved then it is not possible to view excise tab in GR display(There is no question of Part1 and part2 entry).
    Case2)  Check the material is available in J1ID or not....check the material and plant. and chapter id combination.
    Then only you will get the excise invoice tab in MIGO (for Capture and Post of excise Invoice).
    Regards
    Mahesh Naik

  • Country India Version ( Very Urgent)

    Hi All
    Can anyone provide me some complete information about Country india version?
    Good answers will get high reward points .

    hi,
    step 1 CIN CONFIGURATION GUIDE
               GENERAL SETTINGS u2013INSERT REGIONS OVK2
    Path : Sap net weaverGeneral settings set countries insert regions
    step 2 TAXINN PROCEDURE
    Path : IMGFinancial accounting Financial account basic setting tax on sales and purchase
    step 3 ASSIGN COUNTRY TO CALCULATION
    step 4 FI -
    CALCULATION
    DEFINE TAX CODES
    step 5 ASSIGN COMPANY CODE TO TAX DET WITH DATE
    SPECIFY TAX BASE AMOUNT
    Step 6 LOGISTIC GENERAL u2026.TAX ON GOODS MOMENTu2026INDIAu2026
    MAINTAIN EXISE REGISTRATION
    Step 7 MAINTAIN COMPANY CODE SETTINGS
    step 8 MAINTAIN PLANT SETTINGS
    step 9  MAINTAIN EXISE GROUP DETAILS
    step 10 MAINTAIN SERIES GROUPS
    step 11 MAINTIN EXISE DUTY INDICATOR IN CINMASTER IN CMR
    step 12 MAINTAIN EXISE ADDRESS
    step 13 ASSIGN MATERIAL MASTER SCREEN TO CLINT
    step 14 ASSIGN ALL THE CONDITION TYPES TO TAX PROCEDURE.
    step 15 SPECIFIES EXISE ACCOUNTS PER EXISE TRANCTION
    step 16 SPECIFY G/L ACCOUNTS PER EXISE TRANCTION
    step 17 ASSIGN DELIVERY DOCUMENT TYPES TO INVOICE DOCUMENT TYPES
    step 18 ASSIGN EXISE/ SERIES GROUPS TO SALES AREA AND PLANT COMBINATION
    steo 19 CREATE EXISE BOND
    step 20 MAINTAIN OUTPUT TYPES FOR EXISE INVOICE
    Hope this will help u..... if u want i have with the screen shots.....
    ranjit

  • Tax code F6 for country SE has been deleted or incorrectly changed

    Hello All
    I am trying to clear one customer Invoice thru T.code F-28. After giving all parameters when simulating i am getting error message "Tax code F6 for country SE has been deleted or incorrectly changed"
    Message # FS201.
    We are using ECC 6 version.
    Any one solved this error please help me.
    Regrads
    Ravi Kiran

    Hi ,
    I  had Solve my problem ,
    This error can happen because of many reason,
    1. The insistence for tax code would be because the G/L account used
    has been made relevant for tax. Hence the system will not allow to post
    the document without tax code.
    2. If the tax code is not activated for any condition type (maintainanceof tax rate) using table 003 (Tax classification).
    3. If G/L accounts are not assigned to any deductible condition in the
    tax procedure.
    4. If it is an input tax code then not assiging it to company code
    in the following customising node.
    SPRO > Logictics general > Tax on goods mvmt > India > Determination
    of excise duty > Asssign tax code to company code..
    5. If the requirement routine 166 is assigned to the main service tax
    condition also.
    Thanks
    Devang

  • Country India version activation

    Hi All
    We have installed ECC 6.0 IDES in our office. We have activated the country India version in SPRO settings via Financial accounting -->Tax on sales/purchase --> basic settings --> India.
    But when I checked in SPRO settings
    Enterprise structure --> Localize sample org.units
    Country India is not available in the possible entries(F4). So we are not able to configure the tax processess in India.
    Please let me know how to activate Country India Version in ECC6.0 IDES system.
    Regards
    Govindarajan

    Hi,
    Please see the below link.
    http://help.sap.com/bestpractices/BBLibrary/documentation/J03_BB_InstallGuide_EN_IN.doc
    Anil

  • Tax code V1 for country IN has been deleted or incorrectly changed

    Hi,
    1) Tax code V1 for country IN has been deleted or incorrectly changed   ?
    For this issue i checked in FTXP THE TAX code is available at and also i checked at vk11 for combination it is available please reply this question as soon as possible
    Thanks
    2)You cannot post to asset in company code 1100 fiscal year 2012
    For this how can i change fiscal year

    hi
    1) Tax code V1 for country IN has been deleted or incorrectly changed ?
    For this issue i checked in FTXP THE TAX code is available at and also i checked at vk11 for combination it is available please reply this question as soon as possible
    You can try to maintain rate in FTXP for Tax code V1 for Service tax condition only.
    Thanks
    2)You cannot post to asset in company code 1100 fiscal year 2012
    For this how can i change fiscal year
    check fi posting period: in view V_T001B
    check aa posting period: OAAQ, if it is not 2011, execute AJRW - Fiscal Year Change

  • Tax code A0 for country IN has been deleted or incorrectly changedu0092

    HI SAP Gurus
    We are facing the problem with Message FS201 i.e. Tax code A0 for country IN has been deleted or incorrectly changed’.
    Could anybody guide me ?
    Rgds
    Ashok Singh Sunhal
    Edited by: Ashok Singh Sunhal on May 10, 2008 3:29 PM

    hi
    1) Tax code V1 for country IN has been deleted or incorrectly changed ?
    For this issue i checked in FTXP THE TAX code is available at and also i checked at vk11 for combination it is available please reply this question as soon as possible
    You can try to maintain rate in FTXP for Tax code V1 for Service tax condition only.
    Thanks
    2)You cannot post to asset in company code 1100 fiscal year 2012
    For this how can i change fiscal year
    check fi posting period: in view V_T001B
    check aa posting period: OAAQ, if it is not 2011, execute AJRW - Fiscal Year Change

  • Tax code C0 for country IN has been deleted or incorrectly changed

    Dear All
    While making incoming payment in F-06 am getting an error (Tax code C0 for country IN has been deleted or incorrectly changed) Plz give me the solution.
    regds
    raj

    Just check on OBCL.
    Thanks
    Kalyan

  • "Tax code AD for country IN has been deleted or incorrectly changed

    While doing the cash application process in the customer account, I am not able to clear invoice ,as it has discount value. We are getting an error message as "Tax code AD for country IN has been deleted or incorrectly changed" and we are not able to post the transaction.
    Thanks
    Ram

    Hi
    Check the tax code in FTXP if that has been deleted. This error may come if the tax code previously existing & used in document entry is deleted
    and also check this
    FTXP -> Enter country XX -> enter tax code -> click
    properties -> set the reporting country to
    Thanks & Regards
    Phaneendra
    Edited by: phaneendra Reddy on Jul 29, 2009 10:03 AM

  • Message number FS201 Tax code SD for country AR has been deleted or incorre

    Hi, I try to post a transfer with clearing with TS F-30 and the system shows me this message: ‘Tax code SD for country AR has been deleted or incorrectly changed’ number FS201. The tax code SD has already been created and has not been changed.
    Any idea?
    Thanks,
    Cecilia

    Hi,
    Check if 0% is entered for the tax code in condition type using tranasction FV13, it will be blank only which means zero.
    May be record was deleted.
    Regards,
    Chintan Joshi

  • How to maintain Import Processing: Control Code for the country India

    Hi Gurus,
    I need to maintain the Control Processing: Control Code for the country India in SPRO configuration.
    Please tell me the path to maintain it.
    Thanks,
    Thiyagu

    spro@Logistics - General@Material Master@Material IDs@Maintain PKWiUs
    Regards,
    Indranil

  • Country India Version Patch level 5 to 11

    Hi,
    We are having Global template and operating in many countries.  Currently we are planning for Rollout to India,
    We want to know the “Country India” Version patch level 5 to 11 difference. Mean to say the major improvement/development changes in above patches. Your valuable information helps us in for further activities.
    Looking forward for your valuable information.
    Thanks & Regards
    Prabhakar

    Hi,
    We are having Global template and operating in many countries.  Currently we are planning for Rollout to India,
    We want to know the “Country India” Version patch level 5 to 11 difference. Mean to say the major improvement/development changes in above patches. Your valuable information helps us in for further activities.
    Looking forward for your valuable information.
    Thanks & Regards
    Prabhakar

Maybe you are looking for

  • Error while transfering Value of  SY-TABIX to a variable  ?

    Hi, As per my req , i have code like this . {{ Data : idx3 type sy-tabix .} {READ TABLE ITAB2 with key---- { if sy-subrc = 0 .      idx3 = sy-tabix .     DELETE i_sort INDEX idx3 . endif .} clear idx3 .} but it gets sortdumb , While in debugging mode

  • How to delete the records in a faster way

    The dml is as below: delete from GFSTM64_PLANT_INVENTORY a where a.PLANT_EOP_PART_SAKEY IN (select EOP_PLANT_PART_SAKEY from GFSTM62_EOP_PLANT_PART where END_OF_PERIOD_DATE = '31-DEC-2011' ) This has to delete 15 lakh records. Taking more than 6 hour

  • Ongoing problems with newest Mac Pro and CS4

    Hi all, I've just switched from a Final Cut Pro editorial house to a new company that bases production around the Adobe Production Suite using Premiere Pro CS4 for all our editing needs. From what I understand about this company (and this workstation

  • Embedded video control

    I have imported a video into InDesign and provided a button to initiate play. However I find that as soon as the mouse passes over the video object it begins to play. Is there any way to prevent the video playing on mouse over and only on the button

  • Replication with in memory DB: client synchronization

    Hi, I'm using replication framework with two completely in-memory databases. The first one is launched as master without knowledge of its replica db ("dbenv->repmgr_add_remote_site" and "dbenv->repmgr_set_nsites" are not called), some data is inserte