Tax indicator and code
hi,
1 may i know what is the difference between tax indicator and tax code?
2 in purchase info record, it has tax code in purch org data tab. what is the difference of this tax code defined and the tax code in miro?
3 if i enter the tax code which is different from PIR during miro, what will happen?
thanks
Hi,
1 may i know what is the difference between tax indicator and tax code?
For procedure TAXINJ, Tax is calculated based on conditions in the taxcode. Tax indicator is used to determine the taxes for vendor & plant
For procedure TAXINN, Tax is calculated based on conditon records. Here the tax code is used only to trigger the tax calculations.
2 in purchase info record, it has tax code in purch org data tab. what is the difference of this tax code defined and the tax code in miro?
Both are same.
3 if i enter the tax code which is different from PIR during miro, what will happen?
If you are using the TAXINJ, taxes are calculated based on the conditions present in the tax code.
For TAXINN, tax code will not play any role as taxes are calculated based on condition records.
Regards,
Krishna A S V
Similar Messages
-
How many new tax type and tax code are created for change in TDS
Hello Gurus.
we are using SAP since more than one year.
now tDS rate is change , so i would like to know How many new tax type and Tax Code is created in our system
and also like to know At what percentage i will crete that new tax code.
we have pair of tax type and tax code as shown in Example( for Interest) below
Tax type Tax code Name
I1 IC Sec 194A - Interest on deposits
I1 IO Sec 194A - Interest on deposits OT
I2 IC Sec 194A - Interest on deposits Surcharg
I3 IC Sec 194A - Interest on deposits EC& SHEe
I3 IO Sec 194A - Interest on deps EC& SHEe OT
I4 IC Sec 194A - Interest on deposits Pymt
I4 IO Sec 194A - Interest on deposits Pymt OT
I5 IC Sec 194A - Interest on dep Pymt Surcharg
I6 IC Sec 194A - Interest on dep Pymt EC& SHEe
so how namy additional reuire to create new tax type and code more.
i am waiting your reply.
Regard,
Riten patel
Edited by: riten patel on Oct 29, 2009 10:23 AM
Edited by: riten patel on Oct 29, 2009 10:23 AM
Edited by: riten patel on Oct 29, 2009 10:33 AMHello Hansachechani
we have followinng tax key
115O Dividend 115O(1)
192B Salary
194A Interest income other than securities
194C Payment to contractors
194H Commission
194I Rent
194J Prof/Technical services
195 Payment to foreign nationals
206C Tax Collected at Sources (Scrap)
ST Service Tax
and we have followig tax type
C4 Sec 194H Commission Payment
C5 Sec 194H Commission Pymt Surcharge
C6 Sec 194H Commission Pymt EC & SHE Cess
D4 Sec 115O(1) Dividend Payment
D5 Sec 115O(1) Dividend Pymt Surcharge
D6 Sec 115O(1) Dividend Pymt EC & SHE Cess
F4 Sec 195 Foreign Prof fees Payment
F5 Sec 195 Foreign Prof fees Pymt Surcharge
F6 Sec 195 Foreign Prof Fees Pymt E&HS Cess
G1 Service Tax on GTA
G2 Service Tax on GTA E Cess
G3 Service Tax on GTA S&HE Cess
I4 Sec 194A Int on Deposit Payment
I5 Sec 194A Int on Deposit Pymt Surcharge
I6 Sec 194A Int on Deposit Pymt EC & SHE Ce
L4 Sec 194C Contractors Payment
L5 Sec 194C Contractors Payment Surcharge
L6 Sec 194C Contractors Payment EC&S HE Ces
P4 Sec 194J Professional Payment
P5 Sec 194J Professional Pymt Surcharge
P6 Sec 194J Professional Pymt EC & SH E Ces
R4 Sec 194I Rent Payment
R5 Sec 194I Rent Payment Surcharge
R6 Sec 194I Rent Payment E Cess & SH E Cess
So Is it necessary to create new tax key and tax type?
wheather i create new tax code only?
I ma waiting your reply.
Regard,
Riten patel -
From which table i will get PO tax amont and tax code name.
HI all
I"m giving date to develop one Z report.Where i will get the PO tax amonut(not condition amount).i need total TAX amount and TAX code..from where i can get these two??
plz help me
thanks
ramesh reddyHi
for excise check table J_1IEXCHDR for header
J_1IEXCDTL for item excise
The Table name used to find the Tax Values are
KOMV: Pricing Communications-Condition Record
KONV: Conditions (Transaction Data)
From the above tables you can refer the fields below.
KAWRT
KBETR
Fetch the corresponding records based on the field
KNTYP
Search net you will get many threads on this -
RFWT0010 withholding tax type and tax code change in vendor master problem
Hi
Due to some reasons I need to change the withholding tax type and tax code in vendor master.
When i am running the report RFWT010,After changing the tax type and tax code in vendor master...the list contains no items. eventhough there are 14 line items for the vendor that are required to be adjusted with new tax type.
Please suggest how to solve this query.
regards
yesap.ficoAny inputs?
-
Change Tax Type and Tax Code withheld amount
Hello,
I need to change a certain Withholding Tax Type and Tax Code amount to be withheld starting Feb 2007. What is the path in order to change the amount please?
Thank you,
RogerHi Roger
Please see below if you are looking for path to change the min amount
Financial accounting
Financial accounting global settings
Withholding tax
Extended withholding tax
Calculation
Minimum and maximum amounts
Define min/max amount for withholidng tax types
thanks - Ashok - Assign points for useful answers -
Withholding Tax Types and Withholding Tax Code
Good Afternoon SAP Guru's
I need some help with a very basic question. I need to configure WHT and EWHT for 1099 and 1042. I am in the US. Here is the configuration I completed so far which I hope is appropriate. Please tell me if it not.
SPRO for EWHT
Maintain Country
Define Reason for Exemption
*is this needed for 1099 not withholding?
Maintain Recipient Type
Define WHT keys
Check Recipient Types
*1042 only?
WHT type for invoice posting
*created I1 for WHT type for Invoice Posting
WHT type for payment posting
*created 42 for 1042
*created ST for 1099 State
*created FE for 1099 Federal
Define Rounding Rule for WHT
*is this necessary
Assign Condition Type to WHT type
*what is this for?
My big issue is that I am confused on Tax Type and Tax Code.
I believe it is required to have 3 tax types for invoice posting and 3 for payment posting? I have 3 scenarios each. They are as mentioned earlier
1099- not withholding
1099- withholding
1042- withholding
I haven't configured 3 tax types for invoice posting, only 1 at this time.
For tax code, I struggle with the tax code field because the field is only 2 positions and therefore, how do I differentiate the different codes listed on the 1099 and 1042 on here? There are 18 codes on a 1099 and 50 on a 1042. Any suggestions?
Do I need to enter 1099 codes twice because one is exempt and the other is withholding? Or is that the reason why I need to create a exemption reason code for WHT type?
Any help would be greatly appreciated.
Thanks!no response
-
Transfer of tax indicator to purchase order for service items in shopping cart
Hi all.
I have a problem with the tax indicator in the shopping carts and in the backend purchase orders for service items. If I create a shopping cart with service items with different tax indicators, the backend purchase order have a unique item including all the services. So, all the PO items are under one tax indicator while in the shopping cart there is more than one indicator. I mean, the PO is not correctly replicated with the information of the SC.
Example: shopping cart in SRM with 3 items, tax codes: V1, V2, V1. The standard code transfers the information to the backend, and creates a purchase order with an unique item with the 3 services under tax code V1. So, the second service is not under the correct tax code, and will be wrongly invoiced.
We have debugged all the code of the process, and we think it is a standard bug. When you replicate a PO in the backend from a SC in SRM, have you experienced this behaviour, or the service items are grouped in different PO items each one with the correct tax indicator?
Thanks in advance.Hi again...
I forgot to mention that we have found and applied the note 1822107 (Purchase order: wrong tax code for PO with 2 service items), that fits exactly to our problem. But after testing, it doesn't work.
Regards. -
Hi Experts,
We are usnig a Tax Code 5A, which is of 5%. Its a Input Tax Code and has "Check" marked on Check ID field in the Tax Code's Porpoerties Part.
We are trying to posting a document in F-02, and we are manually putting the Tax Amount in the same GL which is assigned to Tax Code 5A.
i guess it should accept the amount which have put manually without poping the error mentioned below :
Tax entered incorrect (code 5A, amount 0), correct 113 YEN. Message no. FF707
Now, more surpirsing is in Prduction server the document got posted and in the Development server the error is thrown.
Experts, please help, since the Client have put forward this question to us.Hi,
If you want a warning instead of error message, you have to modify tax code properties (transaction FTXP) unflag indicator 'CheckID' in tax code properties.
Also field 'Tol.per.rate' in FTXP in propertiees of the tax code is tolerance percentage authorized foe amount entered in the invoice and the SAP calculation. Usually, we put '0,1' in this field cause you can have small differences beween vendor invoice tax amount and SAP calculation.
Regards,
Gaurav -
Defaulting tax indicator I1 on Purchase order ME21n
Where is the configuration for defaulting tax indicator I1 on PO creation transaction screen?
Need help- thanks
RajHI,
You can default tax code in Invoice doucment not in PO. You can get the tac code from the vendor material combination document which is urchasing info record into the PO.
Or maintain in the PO / RFQ / Quotation and reference these documents to make a PO so that the tax code flows in.
Thanks & Regards,
Kiran -
FPI1 -- Interest Posting -- Tax Indicator
Dear all,
When transaction FPI1 (and also FPINTM1) calculates interests, it always uses main item 0040 and sub item 0020. These items are not statistical. Also, these items can be only configured with one tax code indicator.
The problem is that we need to calculate and post interests with the tax indicator that the original line item has. This is a Chilean legal requirement.
For example, if the original line item has a D0 (exempt) tax code, the interest must be posted with the D0 indicator; if the original line item has a D1 (affect) tax code, the interest must be posted with the D1 indicator. Also, if there is a document that has two line items, one with D0 and the other with D1 indicator, the interest document should be posted with two lines and two different tax indicator.
We have been searching for a event/user exit without success (2000 and 2045 donu2019t help). Also, there isnu2019t any OSS note that give us a solution or a workaround and this is an error.
Please, give us some advice
Regards,
Fernando.Hi,
Have you tried event 1110,this event creates the G/L items for tax on sales/purchases when you post interest calc. document.
Also ck the code LFKI1F04 for more detail.
Hope this helps. -
Is it at all possible to default the 'calculate tax' indicator on the header for fb 60 so that users dont have to tick it?
thanksHi,
This can be achieved thru default parameter id for that particular user through transaction code SU3
In SU3 T- code, in Parameters Tab put "XTX" in Parameter ID column and in Parameter Value column put "X".
Thanls,
Lakshman -
VK154 - Tax indicator T1 has percentage rate
Dear Friends,
1. While doing FV11, error messages "Tax indicator T1 has percentage rate- 2.000 "(VK154) is triggered.
Can someone help me to change this to Warning.
2. How can i get the FTXP into change mode in Production client(which object shall i make use of to make it to change ?)
Thanks
IvyHi,
If a tax code alreday maintaioned with tax condition types with tax rate--why you are chnaing tax rate now for that tax code as system may have tranactions data for that tax code with fixed tax rate!!!
Now as you want new tax rate with tax condition types, better create a new tax code and maintaion (FV11)the tax rate with tax condition types. Now go for new PO creation and goods receipt.
Yes, there is a option to change tax rate in t.code:FV12 for tax code with condition type,but check the nature of Access sequence is JTAX. Is your Access sequence JTAX well defind with condition keys.....ie..... where Access sequence JTAX have Validity Period in it.If Access sequence JTAX is a copy of Access sequence JST1,then you can maintaion to change tax rate with validity period.
NOTE:
Validity Period available for tax condition types which have access sequence JST1 not access sequence MWST
Regards,
Biju K -
Explanation of difference between 2 tax categories and -
Hello
In transaction FS00 "create gl account" What is the difference between tax category "<" and "-"? They are both for input tax?!
kr
ArjanDear,
I give you an example which may clarify your doubt.........
Company has received a service from painter and invoice has been posted so journal entry will be....
Expense A/c Dr. Rs 10,000
Service tax Dr. (<)Rs 1,000
Vendor Cr. Rs 11,000
Expense GL master has - (input tax) indicator set which means that input tax can be charged on this account (on Rs 10,000)..And
Service tax GL master has < (Input tax account) which means this account is ready to recieve posting for input tax amount (Rs 1,000)
So if you had selected + in expense GL master then system will not allow you to enter input tax code.
And if you had selected > in service tax GL master then system will not allow you post input tax to this GL Account.
Hope it helps............
Regards,
Chintan Joshi -
Significance and use of CVD indicator and MRP indicator in J1IEX
Dear Frndz...
Plz expln significance and use of CVD indicator and MRP indicator in J1IEX.
Regards,
Amit P Hiran
njoy SAP..
njoy Life...........hi
>CVD TICk
CVD indicator will be auto ticked when when u go for IMPORT PROCESS
check folowing for import process
import process customization
>MRP TICk
MRP tick is used for the first stage dealer scenario ,where at time of purchase u cant have excise values
the bill will be including base price exciseothertax + delears commisiion
E.g.:
Material Price = 80/-
Excise Duty = 14/- (BEDECessSECess)
Margin = 6/-
Total =100/-
VAT @3% = 3/-
Grand Total =103/-
Step 1:
Create PO with Base Price as 100/- by selecting tax code which is having VAT as 3% (Total PO value will be 103/-)
Step 2:
Post MIGO and Capture Excise Part - 1
Click on More details icon in Excise tab (header), check MRP Indicator in miscellaneous tab, Enter Assessable value as 80 in Excise tab Item level and enter the excise values BED, ECess , SECess manually, check & save the document.
Step 3;
Post Excise Part 2 in J1IEX
Step 4:
Post MIRO by checking calculate tax, edit base value as 80/- enter the amount in header as proposed by the system (103/-), simulate & post the document.
Note 1104456 - Use of MRP indicator for capturing excise duties from dealer -
In vendor line item not showing withholding tax amount and withholding base
Hi Gurus,
When i am using T,code FBL1n for details clear item,in line item doesn't showing withholding tax amount and withholding base amount for some vendors when i am using FB03 there showing tax amount and base amount,in option is there.plz help me,its very urgent.
Thanks & regards,
Dharma.Im not sure but may be its because in the config. of 1099 Withholding tax we usually say that the with holding is to be posted only after payment of the open items.
So, lets try this. Look at if the documents which are showing withhld tax in FBL1N if they are paid or not.
this would give us some help or hopefully the answer..
regards
Maybe you are looking for
-
Crash Restarts - Varying Opinions from Genius Bar
I'm experiencing intermittent Restarts and have been in to the Genius Bars several times and get different opinions on the issue. I've been told my hard drive was going, so I relaced it. Didn't fix it. I was then told it was a software issue caused b
-
Thinking of getting a new mac mini and using it with my LCD tv as a monitor. What is the range for the new keyboard and mouse. I will be sittng about 10 to 12 ft away.
-
Can someone please tell me how to activate my new iPhone. I bought it from the at&t website and they are no help.
-
I am an engineer-turned-LabVIEW programmer with 14 years of LabVIEW and industry experience in the San Francisco Bay Area I have worked and programmed the following types of systems: Semiconductors Bioinformatics/DNA Synthesis and Sequencing Digital
-
does anyone have a .REG file they can post that will set IE9 as the default browser on Windos 7 (x86) ? GPO's don't see to solve this problem. We have many users with Chrome and Chrome set itself as the default so we want to make sure everyone h