Tax Jurisdiction Code Check as part of a Sales Order Partner Function

Hi,
I have a scenario where we modify partner information directly in the sales order. These partners are simple addresses and are not tax relevant. We have set them up as one-time customers. Every time when we modify the address information, Vertex kicks in and tries to match the address information (street, city and state) with a tax jurisdiction code. In our case the address information is high level (only city and state) which is not enough for Vertex. SAP issues then a blocking error message.
We try to find a way to ignore Vertex for these specific partners. In the documentation we have found a user exit, as well as a BADI, but our developpers were not able to make it work in the sales oder.
The user-exit is the following: EXIT_SAPLFYTX_USER_001
The BADI is the following: IF_EX_ADDRESS_SUBSCREEN
In EXIT_SAPLFYTX_USER_001, I've found a parameter (EXEMP_IND) which could enable to bypass the tax jurisdiction code check and the RFC call to Vertex.
In IF_EX_ADDRESS_SUBSCREEN, I've found a parameter (CHECK_ADDRESS) which could potentially bypass the check as well.
Did any of you already experience this scenario or would you have an idea about how I could make this work?
Thanks
Loic

Unfortunately, the sales order is created through an interface (using iDOCs), and the external system feeding the iDOC for the sales order creation does not have any Zip Code information. Besides, even if the Zip Code is entered, it is still not enough for Vertex to choose automatically a Tax Jurisdiction Code, most of the times, it is also requiring a District, which again, will not be passed from the interface.
We went through this analysis already and we came to the conclusion that we need to bypass this check, as this partner function is not tax relevant.
Thanks,
Loic
Edited by: Loic Dominik on Jun 27, 2011 7:39 PM

Similar Messages

  • Sales Order Partner Functions (Payers,Ship to Parties)

    Hi All
    When creating a Sales Order in the ICWC application,how can we get all the business partner which belong to different partner functions (All Possible Payers,All Possible Ship to Parties).
    In the application only one value is displayed by default.I want to fetch all the possible partner functions and fill these in a Pop-Up for proposal.
    Thanks & Regards
    Ajitabh

    Hi Ajitabh,
    Actualy the popup function for the partner selection in ICWC is disabled by coding, you will be able to check it in the debug.
    It is not easy to include this in ICWC, as if you simply activate the popup allowed flag in coding, there will be a short dump. As the popup is designed within the ABAP GUI environment not in the browser.
    SAP explains this as ICWC is used for quicker processing, thus nearly every determination will taken the defualt one to save time.
    I am not so sure whether it is possible to developer a new view for selection. This should need much work of codings/development.
    Hongyan

  • Disable Vertex Tax Jurisdiction Code Validation & RFC Call

    We want to disable calling vertex for tax jurisdiction code in some cases based on sales org & division.  For a small business unit we are using SAP ECC 5.0 SD module to create customers & sales orders.  These orders are placed via a external non-SAP front-end and are entered into SAP via a BAPI/RFC create customer & create sales order call.  The front-end calculates all the prices and tax and passes that to SAP via the BAPI call.  SAP accepts the prices & tax as-is (due to how we've configured SAP for these types of orders) and does not recalculate price or tax.  However, on SAP we have external tax configured to call Vertex Q Series via Translink which we currently use to determine jurisdiction code & sales tax for other business units & for use tax.  This external non-SAP front-end does not have any address validation therefore the addresses we receive are not always good (ex. they abbreviate or mis-spell cities, etc...) and therefore when saving customer or order addresses via the BAPI calls we receive errors from SAP indicating that the tax jurisdiction code can not be determined.  In these cases we want to NOT call Vertex for automatic tax jurisdiction code check and allow SAP to accept a state level jurisdiction code that we can pass (ex. Minnesota's is 2400000000).  How can we turn off the call to Vertex for tax jurisdiction code check?  Apparently we can use SAP user exit EXIT_SAPLFYTX_USER_001 include ZXFYTU03 but what is the ABAP code to turn this call off for specific sales org & division?
    Regards,
    Jeff

    Hi,
    You can create the custom tables with the same fields on Vertex and maintain those tables with the same values.
    You can comment the section of RFC call and add your own validations.
    Hope this helps.
    Regards,
    Kranthi

  • No need of Tax Jurisdiction Code

    Dear sir
                While i create tax code ( FTXP ) Tax Jurisdiction is mandatory field . But I don`t want Jurisdition code .Please help me.
    Puru
    Edited by: Purushottam Bawane on Sep 25, 2008 1:56 PM

    Hi,
    Please check the calculation procedure you have defined.
    See following settings
    IMG > Financial Accounting (New) > Financial Accounting Global Settings (New) > Tax on Sales/Purchases > Basic Settings > Specify Structure for Tax Jurisdiction Code
    Check whether your schema has been assigned for Tax Jurisdiction Code?
    Also check Define Tax Jurisdictions
    I hope you will get clear
    Regards,
    Jigar

  • When we post Inbound Invoice IDocs, we are getting an error message "Enter a tax jurisdiction code".

    Hi Experts,
    When we post Inbound Invoice IDocs, we are getting an error message "Enter a tax jurisdiction code". As checked, we have configured OBCD and OBCA for the vendor and we are passing the Tax Jurisdiction code in E1EDP04 SAL segment. Can anybody give us some idea to resolve this issue.
    Regards,
    Sameek

    Hi Sameek,
    Please refer the below link. Hope it helps.
    http://scn.sap.com/thread/1435286
    Regards,
    Chandan.

  • Tax jurisdiction code is not entered

    Hi,
    I am trying to clear vendor open items in F-44 it is showing error "Tax jurisdiction code was not entered" , while posting invoice or post the payment there is no field like Tax Jurisdiction code in the document. I checked in BSEG table there the tax juris code field is blank but it is not appeared in the document and checked the field status of posting key and others also the field is not there and checked in vendor master even entered the tax jurisdiction code also showing the same error. 
    Please help.
    Thanks in advance.

    I think your document contains Taxes and tax jurisdiction is enabled in your system.  Tax jurisdiction key is normally maintained in your tax code if you have enabled Tax Jurisdiction applicability.  Check your config. in OBCO and OBCP.  Also check if you have given any jurisdiction code in the tax code used.
    You can also check if Jurisdiction code is a mandatory field in the address of the vendor or customer you are trying to post.  Fill the field if not already filled.
    Ravi.

  • You are not allowed to enter a tax jurisdiction code for country US

    Hi All,
    We are having this message popping up "You are not allowed to enter a tax jurisdiction code for country US" when we try to add an item to a shopping cart. SRM 4.0 Classic scenario.
    Also when i process the shopping cart and create a PO out of it, our R/3 4.6C dosnot let me release the PO and error message is :"no tax jurisdiction code found"
    I have looked at some of the earlier threads but i could not find a definite solution. Has anybody faced similar problems? Please let me know !
    Thanks
    Sundeep

    Hi Sudeep,
    How did it work? Do you have to implement any BADI's or SRM or R/3 side? As we are getting same error while creating Shopping Cart in SRM.
    I have checked the plant data in R/3 and Jurisdiction code has been maintained there.
    Please advise
    Thank you
    Ritesh

  • Tax Jurisdiction Code not defined for procedure TAXSE

    Hello,
    We are facing any issue with the error "Tax Jurisdiction Code not defined for procedure TAXSE"
    We are in mid of production bill run and this is getting very critical. Any pointers would be highly appreciated.
    The company code country is SE (Sweden)
    We have 2 BPs with address in California, US.
    The Billing is successful for both the BPs.
    While invoicing, one BP is successful.
    The other is going in error "Tax Jurisdiction Code not defined for procedure TAXSE".
    Error Details
    Jurisdiction code not defined for procedure TAXSE
    Message no. FF748
    Diagnosis
    You have entered a jurisdiction code in a country whose calculation procedure
    does not allow the entry of jurisdiction codes.
    System Response
    Procedure
    Check and, if necessary, correct the entry.
    Procedure for System Administration
    If it is not an input error, check and possibly change the system
    settings.
    To do this, choose Maintain entries (F5).
    Change your calculation procedure so that tax calculation is carried out
    using the jurisdiction code.
    The BP and the CA setup is exact for both the cases.
    Thanks

    Hi
    Go to the following SPRO config-
    SAP Customizing Implementation Guide-->Financial Accounting-->Contract Accounts Receivable and Payable--->Basic Functions--->Contract Accounts--->Field Modifications--->Configure Field Attributes per Activity
    Select Change and double-click on field grouping Jurisdiction code.
    You will get the following screen.
    You have to tick the option Changes plannable and then you will be able to remove jurisdiction code from CAA2
    Hope it helps..
    Thanks,
    Amlan

  • Tax Jurisdiction code for EDI Incoming invoice

    Hi,
    We have implemented EDI incoming invoice using INVOIC02. The process code is INVL.The invoice is to be posted against a Purchase Order line item. It is noticed that the EDI invoice is not getting the Tax Jurisdiction code from the Purchase Order line . Instead the Tax Juridiction code is copied from the company code. However when we post the invoice manually using MIRO , then the Tax Juridiction code is copied from the Purchase Order. We understand that the system should take the Tax Jurisdiction code from the Purchase Order even for EDI invoices. Is it compulsory that we have to use the user exit EXIT_SAPLMRMH_014 in order to populate the Tax Jurisdiction code field TXJCD from the Purchase Order line? or is there any config required to enable the transfer of Tax Juridication code from the Purchase Order? In transaction OBCE there is a config to transfer the tax jurisdiction code supplied by the external vendor. If we do not check that box , then system is supposed to get the tax jurisdiction code from the Purchase Order.
    Thanks
    Sukumar

    The issue is resolved through OSS Note 506343. In the standard R/3 system, the tax jurisdiction code can't be written to invoice via EDI and only the Ship To Plant's Tax Jurisdiction Code is written to the invoice.
    Regards
    Sukumar

  • Tax code  cd not assigned tax jurisdiction code in00

    hi gurus,
    while i m making a    p.o. in me21n
    on invoice tab page the following error is coming
    tax code  cd not assigned to  tax jurisdiction code in00
    i have trouble shooted all the possibl elelemnts that could result in such case
    i have already assigned tax code cd to in00 and done all other relevant config
    we r using taxinj procedure and assigned to country IN
    please reply soon
    thanks in advance
    mohit

    Hi,
    Follow the path:
    SPRO->Enterprise Structure->Definition-> Logistic- General->Define, copy, delete, check plant-> Define plant
    Here select your plant and go to details and check did you enter u201CTax Jurisdictionu201D code here, If not enter u201CTax Jurisdictionu201D and save.
    Now try ur transaction now.
    Also check OBCL (see tax code must be input tax with your co. code) and OBBG and all assignment.
    Also check in FTXP,
    1. Tax Code CD, Tax Jurisdiction is there or not?
    2. For your tax code CD, check is the tax is input tax?
    3. And in tax code CD ,check account key like VST / NVV / NAV and the tax rate is zero percentage or not?
    Regards,
    Biju K

  • Tax jurisdiction code

    Hi All,
    I have PO number against which Invoice has been genrated. I need to know how can we find the tax calculated based upon Tax Code and Tax Jurisdiction Code.
    Also need to know how can we determine Tax Code and Tax Jurisdiction Code from PO number.
    Help urgently required. Reward points for all the helpful answers.
    Thanks
    Hari

    Here is additional input:
    We are integrating MDG-Supplier with Data Service (DQM) for the address standardization and duplicate check. This is working fine. 
    We are exploring options to also populate the tax jurisdiction code (based on the address entered) of the vendor master. One of the suggestions was see if SAP Data Services can do this ?
    The tax jurisdiction code needs to be determined in real time while the user is entering/change the address in the MDG UI

  • INVOIC idoc error 51due to "Enter a tax jurisdiction code"

    Hi Expeets
    We use INVOIC for automated MIRO for an interco STO.
    Th idoc is unsuccessful due to message "Enter a tax jurisdiction code"
    The tax jurisdiction code is already there in PO item and it is getting determined in MIRO item when we manually create invoice.
    Please guide me to avoid this error with Idoc.
    thanks
    ramSiva

    Hi ramSiva,
    You will need to do a test with the IDoc to see if it is processed correct when you fill the tax jurisdiction code. Then you will now that you need to adjust the code for processing the IDoc.
    If it still goes wrong then there is something else incorrect.
    I am not a functional consultant, but maybe these are customizing settings where the taks code is made mandatory. Check with your functional consultant, maybe he knows the rules for this field in relation to customizing settings.

  • While doing MIRO i am getting an error: Enter a tax jurisdiction code

    Hi,
    While doing a MIRO, i am getting an error :
    Enter a tax jurisdiction code
    Message no. M8757
    How to Resolve
    Pratik

    Hi
    Try this
    1.To enter the tax amounts of the G/L account items, choose Extras ® Tax amounts. The Tax Amounts screen appears.
    You can branch to this screen at any point during document entry.
    The Tax Amounts screen shows the tax amount, tax code, posting key, tax base amount, and jurisdiction code for all the items already entered. When you call up this screen after entering the G/L account items, it displays the amounts that have already been entered.
    2.You can now choose how you want to enter the taxes.
    The tax jurisdiction codes represent the different taxing authorities to which you submit payment for taxes EG: the state, county, city etc. 
    In SAP you can have as many as 4 levels. Configuration is done in 2 steps :
    First step :
    The tax jurisdiction structure (structure of the tax code) is set up with following menu path : 
    IMG >Financial accounting> Fi Accounting basic settings> tax on sales/purchases > basic settings > specify structure for tax jurisdiction code.
    Alternatively you can use t-code OBCO
    This step allows you the enter the character length of your various level of hierarchy within your tax jurisdiction code structure (State 2 char, county 3, city 4, etc...).
    Second step:
    You configure the tax jurisdiction code using the structure defined earlier, menu path :
    IMG >Financial accounting> Fi Accounting basic settings> tax on sales/purchases > basic settings > define tax jurisdiction codes.
    Alternatively t-code  OBCP
    Define your tax jurisdiction codes, EG GA0000000 for Georgia, GA001000 for Georgia, douglas county, GA001001 for georgia, douglas county, city of lithia springs.

  • Tax jurisdiction code creates a difference when posting invoice with PO ref

    I have added a tax jurisdiction code since the client wants to be able to sort taxes by location.  The problem now is that, I have posted a PO with a tax jurisdiction code but upon posting the invoice with reference to this PO, there's an error saying that there still exists a balance even though the balance on the screen is zero.  Any ideas on how this can be solved?

    Hi ,
    Can you please tell us how you resolved? We do facing the same problem.
    Thanks
    Ganesh

  • How to Bypass Tax Jurisdiction Code  while Posting FI Document

    Hello All,
       I have a requirement where I can enter Tax code along with Tax Jurisdiction for some of the cases while Posting FI Document using T code s FB01.. etc.
    However for  one scenario I need to BY pass the Tax Jurisdiction while posting FI Document . How to achieve this.
      As  per SAP once we define Tax Jurisdiction it is mandatory to enter as Input to Post the document.
      But I need to control this Tax Jurisdiction as I dont want to enter  while posting FI Document.It should not prompt for Tax Jurisdiction .
      How to make an option field in this case (Based on Company code and Tax code combination).
      Any BADI / User exit/BTE to Ignore the Error message Enter Tax Jurisdiction code).
    Please help me as soon as possible.
    Thanks.

    My Query is , when am posting a document in FB01 Transaction , when I enter Tax code at line item level, Tax jurisdiction is mandatory if we dont enter it give an error saying that ' Please enter a Tax Jurisdiction' .
       My requirement is I would like to bypass that error without entering Tax jurisdiction I would like to proceed by providing default Tax Jurisdiction through any userexit/BADI/BTE. so that I will not get that error .
       So any USER-EXIT/BTE/BADI is there which will trigger before the error(maintain tax jurisdiction )  at line Item leve ?????
    I hope now requirement is clear.

Maybe you are looking for