TCODE for an ABAP query

My requirement is to create a TCODE for an ABAP query, Can I use the program name directly to do so ..? if so is there any chance that the program name may change..?

hi
good
use the SE93 create the tcode for the abap program,if you r going to change in the abap program than also your tcode ll work.
thanks
mrutyun^

Similar Messages

Generation of program code for the ABAP Query

Dear all,
In the creation of the ABAP query, in the final step of SQ01, Query- more functions- generate program is made.
Why the program code is generated for the ABAP query? please give the logical explaination for the same.
Thanks and Regards,
Prash

Prash,
a) Do you mean Program code does not have significance in query creation?
No it does not mean this. All queries run based on an ABAP program. In the standard query editing process, when you save and execute the query, you will automatically re-build the existing ABAP program as necessary. You do not need, though, to execute the menu steps you outlined in order to build, maintain, or execute the query. It is only there for special purposes, as outlined above by Jürgen
b) Can we see the program code generated in any transaction?
From any screen, System > Status. Place your cursor on the field in "Program (screen)". Double click.
Rgds,
DB49

Steps for creating abap query

hi sap gurus,
can i steps for creating abap query
plz help me on this.
regards,
balaji.t
09990019711

Hi
Please check this link for a document on ABAP query. It explains the process step by step with screen shots..
http://www.auditware.co.uk/downloads/SAPQuery_step_thru.pdf
Thanks,
Ravi

Need ABAP Query Builder Like Ms-SQLQuery Builder for Critical ABAP-Query

Dear ABAP Friends,
I Need ABAP Query Builder which is as flexible as Ms-SQLQuery Builder for building Critical ABAP-Queries e.g. "I have 4 master tables , Each master table having self-join with some condition and these 4 Result-Sets have Innser-Join+Left Outer Join " Please Help.

I have seen TCODE SQ01, But I found that this TCODE may be used to build simple ABAP Query with Selection-screen which can be used for generating simple report. But i think for critical query ??????????
I have build my Query in MS-SQL and got the right output, Now how do I write this in ABAP Using Join statement. Please Help.....................
My SQL Query as below(Remember this is a single Query and verified correct in SQL):
SELECT     P1.PERNR, P1.ENAME, P1.BEGDA AS P1BEGDA, P1.ENDDA AS P1ENDDA, P1.AEDTM AS P1AEDTM, P1.UNAME AS P1UNAME, P1.PERSG, P1.PERSK,
                      P1.PLANS,
       P2.ENDDA AS P2ENDDA, P2.BEGDA AS P2BEGDA, P2.AEDTM AS P2AEDTM, P2.UNAME AS P2UNAME, P2.GESCH, P2.FAMST,
                   P21.ENDDA AS P21ENDDA, P21.BEGDA AS P21BEDDA, P21.AEDTM AS P21AEDTM, P21.UNAME AS P21UNAME, P21.FAMSA, P21.FAVOR, P21.FANAM,
                      P21.FGBDT, P21.FASEX,
                   P0.ENDDA AS P0ENDDA, P0.BEGDA AS P0BEDDA, P0.AEDTM AS P0AEDTM, P0.UNAME AS P0UNAME, P0.MASSN,
                      P0.MASSG
FROM         (SELECT     TOP (100) PERCENT PA0001_2.PERNR, PA0001_2.ENDDA, PA0001_2.BEGDA, PA0001_2.AEDTM, PA0001_2.UNAME, PA0001_2.PERSG,
                                              PA0001_2.PERSK, PA0001_2.PLANS, PA0001_2.ENAME
                       FROM          PA0001 AS PA0001_2 INNER JOIN
                                                  (SELECT     PERNR, MAX(ENDDA) AS ENDDA
                                                    FROM          PA0001 AS PA0001_1
                                                    GROUP BY PERNR) AS Pi1
ON PA0001_2.PERNR = Pi1.PERNR
AND PA0001_2.ENDDA = Pi1.ENDDA
                                           ORDER BY PA0001_2.PERNR) AS P1 LEFT OUTER JOIN
                          (SELECT     TOP (100) PERCENT PA0000.PERNR, PA0000.ENDDA, PA0000.BEGDA, PA0000.AEDTM, PA0000.UNAME, PA0000.MASSN,
                                                   PA0000.MASSG
                            FROM          PA0000 INNER JOIN
                                                       (SELECT     PERNR, MAX(AEDTM) AS Pi0AEDTM
                                                         FROM          PA0000 AS PA0000_1
                                                         GROUP BY PERNR) AS Pi0 ON PA0000.PERNR = Pi0.PERNR AND PA0000.AEDTM = Pi0.Pi0AEDTM
                            ORDER BY PA0000.PERNR) AS P0 ON P1.PERNR = P0.PERNR LEFT OUTER JOIN
                          (SELECT     TOP (100) PERCENT PA0021.PERNR, PA0021.ENDDA, PA0021.BEGDA, PA0021.AEDTM, PA0021.UNAME, PA0021.FAMSA, PA0021.FAVOR,
                                                   PA0021.FANAM, PA0021.FGBDT, PA0021.FASEX
                            FROM          PA0021 INNER JOIN
                                                       (SELECT     PERNR, MAX(AEDTM) AS Pi21AEDTM
                                                         FROM          PA0021 AS PA0021_1
                                                         GROUP BY PERNR) AS Pi21 ON PA0021.PERNR = Pi21.PERNR AND PA0021.AEDTM = Pi21.Pi21AEDTM
                            ORDER BY PA0021.PERNR) AS P21 ON P1.PERNR = P21.PERNR LEFT OUTER JOIN
                          (SELECT     TOP (100) PERCENT PA0002.PERNR, PA0002.ENDDA, PA0002.BEGDA, PA0002.AEDTM, PA0002.UNAME, PA0002.GESCH,
                                                   PA0002.FAMST
                            FROM          PA0002 INNER JOIN
                                                       (SELECT     PERNR, MAX(ENDDA) AS Pi2ENDDA
                                                         FROM          PA0002 AS PA0002_1
                                                         GROUP BY PERNR) AS Pi2 ON PA0002.PERNR = Pi2.PERNR AND PA0002.ENDDA = Pi2.Pi2ENDDA
                            ORDER BY PA0002.PERNR) AS P2 ON P1.PERNR = P2.PERNR
xxxxx----
Edited by: Goutam Roy on May 5, 2009 1:11 PM

Assigning a Tcode for SQ02/SQ01 query

Dear All,
To create query i have used following steps
1. In SQVI check the Infoset name associated with the query you are trying to run.
2. Go to SQ02 using the infoset name.
3. Select "Field Groups" on the toolbar. Add the field in this field group.
4. Go to the "Code" tab on the next screen.
5. Select "Code Section" as "Record Processing" and write the code to populate the
column.
6. Activate the Infoset and then activate the Query also.
After this how to assign a tcode for the query
pls explain in detail.
Thanks.

Hi,
Follow the below mentioned steps:
Go to Tcode SE93 give the name of the tcode which you want to be create. Give description in the next screen and select last or 5th radio button(Transaction with Parameters) and press enter in the next screen give the Transaction as START_REPORT, next check the skip initial screen check box, next select all the GUI support check boxes, next in default values section D_SREPOVARI-REPORTTYPE = AQ(Give your own text), D_SREPOVARI-REPORT = your query name, then save it and check it.
Cheers,
Bujji

Tcode for sap query

hi experts,
Pls let me know how to create a tcode for a SAP query .I am using infoset query for combining two tables.I have created a query and the report is working properly .now i need to create a tcode for end users to work on it .when they enter the tcode it has to go to the selection screen ie variant part of my report.

Hi,
Go to se93 and select the create button. You will then be asked to writed down the tcode of your choice then create a short text for that tcode. Select the 2nd option button w/c is the "Program and Selection Screen (report transaction)." Press enter. Then key in the program name and the variant you saved in the program. When transporting to Prod, Save the variant there as well. If you placed "DEFAULT" in the creation of tcode, you should also save "DEFAULT" variant in production. Hope this helps.

ABAP Queary Or SAP Queary Doc/ How to Create Tcode for ABAP queary report

Hi All,
Please send the documentation on ABAP Queary.
How to create transaction code Report developed using ABAP Queary.
Regards
sudheer

Hi,
Check out these links.
http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly

Pnp- logical db in abap query

hi.
i need to create an ABAP/sap query. when i created the InfoSet i used logical db-pnp.
if i want to get only the employees which entered my organization during the last month where should i add the ABAP code, under which section => extras -> code. i have there several options - data, initialization, at selection-screen output etc, what to choose??????????
thanks,
Ami

Hi
Welcome to SDN forum
query has got some limitatins compared to Reports which we write using SE38
these queries are user specific and client specific and can't be transportable and you can't write your own code as you wish like reports
see the doc
http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
use either SQ02 ans SQ01
or SQVI tr code
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
Regards
Anji

Gross Salary Report Need to develop in ABAP Query -sap-hr

Dear Experts,
i need to create salary report through ABAP-query.
i have following below stops.
1)Create user group thorugh SQ03.
2) Having problem in creating Infosets,as i need to use PNPCE as ldb and p9001,p9002,p9008,p9000,p90402.but when i am created infoset it is showing in order p9000,p9001,p9002,p9008,p90402.and i am not finding any where join condition,how will i join these.
Didnt find any tutorials..for HR abap-query
please advice.
Thanks & Regards
Anwar

Dear Experts,
i need to create salary report through ABAP-query.
i have following below stops.
1)Create user group thorugh SQ03.
2) Having problem in creating Infosets,as i need to use PNPCE as ldb and p9001,p9002,p9008,p9000,p90402.but when i am created infoset it is showing in order p9000,p9001,p9002,p9008,p90402.and i am not finding any where join condition,how will i join these.
Didnt find any tutorials..for HR abap-query
please advice.
Thanks & Regards
Anwar

SQ01 - Include a check box on ABAP query Selection screen

Hi Experts,
For my Abap Query, on the selection screen i am planning to include a check box such that if i click on the check box then a field will be displayed in the resulting output . On the other hand if i do not check on i should not be able the field in the output.
Please tell me how do i do this.
Thanks
Venkata Pradeep.

In infoset, Extras code tab
Code section: At selection-screen output
Do something like below:
IF radiobutton1 = 'X'.
     LOOP AT SCREEN.
          IF screen-group1 = 'XXXX'.         "XXX is the filed group name you want to hide., you have to                                                                  find out what is it.
               screen-input = '1'.
               screen-invisible = '0'.
               MODIFY SCREEN.
          ENDIF.
     ENDLOOP.
ELSE.
     LOOP AT SCREEN.
          IF screen-group1 = 'XXX'.
               screen-input = '0'.
               screen-invisible = '1'.
               MODIFY SCREEN.
          ENDIF.
     ENDLOOP.
ENDIF.

ABAP QUERY(sq02)

Hi friends,
     I am using PNP LDB in SQ02 .
     i am selecting AT SELECTION-SCREEN in "CODE tab" but it's not selected
     How to use "F4 help function module" in ABAP Query(SQ02).
Thanks & Regards,
Vallamuthu.M

Hi
Why you are using SQ01/02 query? you can't get all the facilities what you use in general abap program report
Query is basically intended for functional consultants to get the data by joining the tables
it is Client specific and user specific
You can't use all the events and F4 help like thing in them.
see the doc
http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
use either SQ02 ans SQ01
or SQVI tr code
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
<b>Reward points for useful Answers</b>
Regards
Anji

Abap query tool

Hi Anji,
Pls send the procedure (steps) in abap query tool.How to generate a report by using query tool?
thanks in advance
ramu

Hi
http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
use either SQ02 ans SQ01
or SQVI tr code
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
<b>Reward points for useful Answers</b>
Regards
Anji

ABAP Query and SAP quary

What is the diff between ABAP Query and SAP quary?

Balu,
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly.
Check out these links.
http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
Kindly reward points by clicking the star on the left of reply,if it helps.Kindly close your previous threads if your problem is solved and reward points for helpful answers.
Don't forget to reward if useful...

ABAP Query - Selection fields

Hello all,
I understand that SAP automatically generates an ABAP program for every ABAP Query wherein the selection fields are connected by an "AND" statement within the WHERE clause of the actual SELECT statement.
Is there a way to control this WHERE clause in such a way that we can use "OR" operators as well to connect some selection fields?
Thanks in advance,
John

Hi, Everyone .
We can do that .
At selection-screen output (code section 13), set "1" to the field REQUIED by using MODIFY SCREEN code .
(You can get Dynpro number by F1 key or T-cd SE51 )
Masao .
Edited by: MASAO NONAKA on Oct 20, 2008 9:11 AM

ABAP QUERY Report : column number change

Hi friends,
I need to modify the existing ABAP QUERY REPORT.
I have added a new field in the selection screen.
When I execute the query, it(our new filed) is displaying at the end of the columns.
But I want it to be at 8th columns. please help me.
When I try to change the out position to "8"at "Basic list" -> select check box of our field and double clict it, I am getting the following error.
Warning: Overlapping fields
Those fields overlapped by other fields will not be displayed in their entirety.
So I could not display the new field at 8 th column.
Guys. Please help me.

Hi
You have to change the position of each field after 8th column
suppose you added your new field at the 8th column position
then all the subsequent fields positions you have to adjust as per their length
You have to do like this to adjust the columns
see the doc on query
http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
use either SQ02 ans SQ01
or SQVI tr code
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
Regards
Anji

TCODE for an ABAP query

Similar Messages

Maybe you are looking for