Tcode for Analyze application log

Hello BW Experts,
What is the transaction code for analyze application log.
I am accessing it in this way:
Ods > manage > activation > log > application log
Thanks,
BWer

Hi,
You can try SLG1.
Hope this helps...

Similar Messages

What are F. M's used for creating application log in application server

Hello
plz suggest which F.M's i have to use to create application log
Regards
Kanth

Hi Kanth,
You can go through the following Function Modules :
Application Log Maintenance
(i)APPL_LOG_DELETE With this function module you delete logs in the database according to specified selection conditions
(ii)APPL_LOG_DISPLAY With this function module you can analyze logs in the database.
(iii)APPL_LOG_DISPLAY_INTERN With this function module you can analyze logs in local memory, e.g. when you have only collected log records at runtime and do not want to write to the database.
(iv)APPL_LOG_INIT This function module checks whether the specified object or sub-object exists and deletes all existing associated data in local memory.
(v)APPL_LOG_READ_DB With this function module you read the log data in the database for an object or sub-object according to specified selection conditions.
(vi)APPL_LOG_READ_INTERN With this function module you read all log data whose log class has at least the specified value, from local memory, for the specified object or sub-object.
(vii)APPL_LOG_SET_OBJECT With this function module, you create a new object or sub-object for writing in local memory. With a flag you can control whether the
(viii)APPL_LOG_WRITE_u2026 messages are written in local memory or are output on the screen.
(ix)APPL_LOG_WRITE_DB With this function module you write all data for the specified object or sub-object in local memory to the database. If the log for the object or sub-object in question is new, the log number is returned to the calling program.
(x)APPL_LOG_WRITE_HEADER With this function module, you write the log header data in local memory.
(xi)APPL_LOG_WRITE_LOG_PARAMETERS With this function module, you write the name of the log parameters and the associated values for the specified object or sub-object in local memory. If this function module is called repeatedly for the same object or sub-object, the existing parameters are updated accordingly. If you do not specify an object or sub-object with the call, the most recently used is assumed.
(xii)APPL_LOG_WRITE_MESSAGE_PARAMS With this function module you write a single message, with parameters, in local memory. Otherwise the function module works like
(xiv)APPL_LOG_WRITE_SINGLE_MESSAGE.
(xv)APPL_LOG_WRITE_MESSAGES With this function module you write one or more messages, without parameters, in local memory.
(xvi)APPL_LOG_WRITE_SINGLE_MESSAGE With this function module you write a single message, without parameters, in local memory. If no header entry has yet been written for the object or sub-object, it is created. If you do not specify an object or sub-object with the call, the most recently used is assumed.
Regards,
Swapna.

Configure CCMS alert to Analyze Application log

Hi ,
Please provide the prodecure to configure CCMS alert for Applications logs from SLG1 tcode.
If any error log(prefarably Important logs ) is created then a alert should be triggered .
Background : We are using Solution Manager 7.0 as Central monitor system for Satellite systems of verions ECC6.0.
Thanks & Regards
ganesh

this answer is no longer needed

Responsibles for standard application log development (SBAL)

Hi,
does anyone know, who is responsible for the development of the standard application log (SBAL).
Best regards,
Fabian

Hi Fabian,
I think one of them is,
 Brigitte Rousseau ([email protected])
He replies to some of the critical problems in app log.
One such note is 575143
Hope this helps..
Sri

Create Object and Subject for Application Log

Hello Experts,
Could anyone tell me how to create the Z Object and subobject for the Application Log.
ie) BALOBJ_D & BALSUBOBJ
Could you please tell me the Tcode for that.
Since I have to save the application in the new object so that it can be displayed using this Key.
Thanks & Regards,
Vasanth

Hello Vasanth
The transaction is SLG0 (Object Maintenance).
Regards
Uwe

Please guide me to analyze GC log file for adjust JVM options.

My application has error "OutOfMemory" and I've try to enable GC log, but I do not have idea for analyze GC log and adjust JVM options. Does any one can help me ?
[My JVM options is]
MEM_ARGS="-server \
-Xms2g \
-Xmx2g \
-XX:NewSize=512m \
-XX:MaxNewSize=512m \
-XX:+DisableExplicitGC \
-XX:ThreadStackSize=256 \
-XX:MaxTenuringThreshold=0 \
-XX:SurvivorRatio=1024 \
-XX:PermSize=64M \
-XX:MaxPermSize=64m"
DEBUG_GC="-verbose:gc \
-Xloggc:${SERVER_HOME}/GC/GC`date +%Y%m%d`.log \
-XX:+PrintGCTimeStamps -XX:+PrintGCDetails \
-XX:+PrintTenuringDistribution"
GC_OPTIONS="-XX:+UseConcMarkSweepGC \
-XX:+UseParNewGC \
-XX:CMSInitiatingOccupancyFraction=60"
[GC ]
: 1572863K->1572823K(1572864K), 5.5275114 secs] 2096703K->1993925K(2096704K), [CMS Perm : 58781K->58774K(65536K)], 5.5280837 secs]
86093.675: [GC [1 CMS-initial-mark: 1572823K(1572864K)] 1994583K(2096704K), 0.2800800 secs]
86094.001: [CMS-concurrent-mark-start]
86107.896: [Full GC 86107.896: [ParNew: 523839K->523839K(523840K), 0.0000862 secs]86107.896: [CMS86108.959: [CMS-concurrent-mark: 1.635/14.958 secs]
: 1572847K->1572822K(1572864K), 4.9875946 secs] 2096687K->1994803K(2096704K), [CMS Perm : 58785K->58774K(65536K)], 5.0045622 secs]
86113.478: [GC [1 CMS-initial-mark: 1572822K(1572864K)] 2096662K(2096704K), 0.5670275 secs]
86114.047: [CMS-concurrent-mark-start]
86155.856: [Full GC 86155.856: [ParNew: 523839K->523839K(523840K), 0.0001770 secs]86155.856: [CMS86157.153: [CMS-concurrent-mark: 1.592/43.106 secs]
: 1572862K->1572823K(1572864K), 5.3308609 secs] 2096702K->1995505K(2096704K), [CMS Perm : 58782K->58774K(65536K)], 5.3315995 secs]
86161.739: [GC [1 CMS-initial-mark: 1572823K(1572864K)] 1995553K(2096704K), 0.2858129 secs]
86162.084: [CMS-concurrent-mark-start]
86173.754: [Full GC 86173.754: [ParNew: 523840K->523840K(523840K), 0.0000846 secs]86173.754: [CMS86174.731: [CMS-concurrent-mark: 1.607/12.647 secs]
: 1572845K->1572821K(1572864K), 5.0335458 secs] 2096685K->1996152K(2096704K), [CMS Perm : 58784K->58772K(65536K)], 5.0342192 secs]
86179.361: [GC [1 CMS-initial-mark: 1572829K(1572864K)] 2096664K(2096704K), 0.5667548 secs]
86179.929: [CMS-concurrent-mark-start]
86207.515: [Full GC 86207.515: [ParNew: 523840K->523840K(523840K), 0.0000881 secs]86207.515: [CMS86208.915: [CMS-concurrent-mark: 1.519/28.985 secs]
: 1572862K->1572822K(1572864K), 5.8271415 secs] 2096702K->1997059K(2096704K), [CMS Perm : 58780K->58772K(65536K)], 5.8277265 secs]
86213.848: [GC [1 CMS-initial-mark: 1572822K(1572864K)] 2096662K(2096704K), 0.5999998 secs]
86214.450: [CMS-concurrent-mark-start]
86227.930: [Full GC 86227.930: [ParNew: 523840K->523840K(523840K), 0.0000894 secs]86227.930: [CMS86229.357: [CMS-concurrent-mark: 1.481/14.908 secs]
: 1572835K->1572811K(1572864K), 5.7486918 secs] 2096675K->1998051K(2096704K), [CMS Perm : 58781K->58772K(65536K)], 5.7492990 secs]
86234.182: [GC [1 CMS-initial-mark: 1572812K(1572864K)] 2096652K(2096704K), 0.5279800 secs]
86234.712: [CMS-concurrent-mark-start]
86278.178: [Full GC 86278.178: [ParNew: 523840K->523840K(523840K), 0.0000918 secs]86278.178: [CMS86279.540: [CMS-concurrent-mark: 1.551/44.828 secs]
: 1572862K->1572814K(1572864K), 5.3631131 secs] 2096702K->1998905K(2096704K), [CMS Perm : 58780K->58772K(65536K)], 5.3636573 secs]
86284.209: [GC [1 CMS-initial-mark: 1572815K(1572864K)] 2096654K(2096704K), 0.5131726 secs]
86284.724: [CMS-concurrent-mark-start]
86323.085: [Full GC 86323.086: [ParNew: 523839K->523839K(523840K), 0.0000774 secs]86323.086: [CMS86324.608: [CMS-concurrent-mark: 1.672/39.884 secs]
: 1572862K->1572816K(1572864K), 5.7289521 secs] 2096702K->1999501K(2096704K), [CMS Perm : 58781K->58772K(65536K)], 5.7295485 secs]
86329.353: [GC [1 CMS-initial-mark: 1572817K(1572864K)] 2096656K(2096704K), 0.5541898 secs]
Thank you.

My application has error "OutOfMemory" and I've try to enable GC log, but I do not have idea for analyze GC log and adjust JVM options. Does any one can help me ?
[My JVM options is]
MEM_ARGS="-server \
-Xms2g \
-Xmx2g \
-XX:NewSize=512m \
-XX:MaxNewSize=512m \
-XX:+DisableExplicitGC \
-XX:ThreadStackSize=256 \
-XX:MaxTenuringThreshold=0 \
-XX:SurvivorRatio=1024 \
-XX:PermSize=64M \
-XX:MaxPermSize=64m"
DEBUG_GC="-verbose:gc \
-Xloggc:${SERVER_HOME}/GC/GC`date +%Y%m%d`.log \
-XX:+PrintGCTimeStamps -XX:+PrintGCDetails \
-XX:+PrintTenuringDistribution"
GC_OPTIONS="-XX:+UseConcMarkSweepGC \
-XX:+UseParNewGC \
-XX:CMSInitiatingOccupancyFraction=60"
[GC ]
: 1572863K->1572823K(1572864K), 5.5275114 secs] 2096703K->1993925K(2096704K), [CMS Perm : 58781K->58774K(65536K)], 5.5280837 secs]
86093.675: [GC [1 CMS-initial-mark: 1572823K(1572864K)] 1994583K(2096704K), 0.2800800 secs]
86094.001: [CMS-concurrent-mark-start]
86107.896: [Full GC 86107.896: [ParNew: 523839K->523839K(523840K), 0.0000862 secs]86107.896: [CMS86108.959: [CMS-concurrent-mark: 1.635/14.958 secs]
: 1572847K->1572822K(1572864K), 4.9875946 secs] 2096687K->1994803K(2096704K), [CMS Perm : 58785K->58774K(65536K)], 5.0045622 secs]
86113.478: [GC [1 CMS-initial-mark: 1572822K(1572864K)] 2096662K(2096704K), 0.5670275 secs]
86114.047: [CMS-concurrent-mark-start]
86155.856: [Full GC 86155.856: [ParNew: 523839K->523839K(523840K), 0.0001770 secs]86155.856: [CMS86157.153: [CMS-concurrent-mark: 1.592/43.106 secs]
: 1572862K->1572823K(1572864K), 5.3308609 secs] 2096702K->1995505K(2096704K), [CMS Perm : 58782K->58774K(65536K)], 5.3315995 secs]
86161.739: [GC [1 CMS-initial-mark: 1572823K(1572864K)] 1995553K(2096704K), 0.2858129 secs]
86162.084: [CMS-concurrent-mark-start]
86173.754: [Full GC 86173.754: [ParNew: 523840K->523840K(523840K), 0.0000846 secs]86173.754: [CMS86174.731: [CMS-concurrent-mark: 1.607/12.647 secs]
: 1572845K->1572821K(1572864K), 5.0335458 secs] 2096685K->1996152K(2096704K), [CMS Perm : 58784K->58772K(65536K)], 5.0342192 secs]
86179.361: [GC [1 CMS-initial-mark: 1572829K(1572864K)] 2096664K(2096704K), 0.5667548 secs]
86179.929: [CMS-concurrent-mark-start]
86207.515: [Full GC 86207.515: [ParNew: 523840K->523840K(523840K), 0.0000881 secs]86207.515: [CMS86208.915: [CMS-concurrent-mark: 1.519/28.985 secs]
: 1572862K->1572822K(1572864K), 5.8271415 secs] 2096702K->1997059K(2096704K), [CMS Perm : 58780K->58772K(65536K)], 5.8277265 secs]
86213.848: [GC [1 CMS-initial-mark: 1572822K(1572864K)] 2096662K(2096704K), 0.5999998 secs]
86214.450: [CMS-concurrent-mark-start]
86227.930: [Full GC 86227.930: [ParNew: 523840K->523840K(523840K), 0.0000894 secs]86227.930: [CMS86229.357: [CMS-concurrent-mark: 1.481/14.908 secs]
: 1572835K->1572811K(1572864K), 5.7486918 secs] 2096675K->1998051K(2096704K), [CMS Perm : 58781K->58772K(65536K)], 5.7492990 secs]
86234.182: [GC [1 CMS-initial-mark: 1572812K(1572864K)] 2096652K(2096704K), 0.5279800 secs]
86234.712: [CMS-concurrent-mark-start]
86278.178: [Full GC 86278.178: [ParNew: 523840K->523840K(523840K), 0.0000918 secs]86278.178: [CMS86279.540: [CMS-concurrent-mark: 1.551/44.828 secs]
: 1572862K->1572814K(1572864K), 5.3631131 secs] 2096702K->1998905K(2096704K), [CMS Perm : 58780K->58772K(65536K)], 5.3636573 secs]
86284.209: [GC [1 CMS-initial-mark: 1572815K(1572864K)] 2096654K(2096704K), 0.5131726 secs]
86284.724: [CMS-concurrent-mark-start]
86323.085: [Full GC 86323.086: [ParNew: 523839K->523839K(523840K), 0.0000774 secs]86323.086: [CMS86324.608: [CMS-concurrent-mark: 1.672/39.884 secs]
: 1572862K->1572816K(1572864K), 5.7289521 secs] 2096702K->1999501K(2096704K), [CMS Perm : 58781K->58772K(65536K)], 5.7295485 secs]
86329.353: [GC [1 CMS-initial-mark: 1572817K(1572864K)] 2096656K(2096704K), 0.5541898 secs]
Thank you.

SSL logging for an application

How can i set up SSL logging for just one application. I have an htmldb SSL application that i want to track through my oracle http server log. How can i set up a log to just track the directory path that it is in. For example, i want all /pls/htmldb/f?p=164:* tracked in this log alone.

Hi,
 if you are using JDKLogging then as per Standard J2SE Specification you can have the following Logging Levels in decreasing Order: 
SEVERE (highest value)
WARNING
INFO
CONFIG
FINE
FINER
FINEST (lowest value)
 But if u are using Log4j Implementation for your Application logging then u can have the following levels 
static Level DEBUG - The DEBUG Level designates fine-grained informational events that are most useful to debug an application.
static Level INFO - The INFO level designates informational messages that highlight the progress of the application at coarse-grained level.
static Level WARN - The WARN level designates potentially harmful situations.
static Level ERROR - The ERROR level designates error events that might still allow the application to continue running.
static Level FATAL - The FATAL level designates very severe error events that will presumably lead the application to abort.
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com/2010/03/03/log4j-at-application-level-in-weblogic/ (WebLogic Wonders Are Here)

How to setup rotation for application.log?

In order to get the Portal Performance Statistics running, we need to retrieve the page views from file application.log in directory <ORAHOME>\j2ee\OC4J_Portal\application-deployments\portal\OC4J_Portal_default_island_1.
This file continues to grow and therefore we want to set up rotation, in order to get one file per day.
We are following note 264373.1 and have read all documents and manuals about logging, but can not figure out how to manage this.
Can anyone help us? We are working with 9.0.4.1.
For Oracle employees: see also tar 4193327.994.

I can't speak for how portal uses the log file, but in general, the way you do it for a deployed J2EE application on OC4J is as follows.
Deploy the application EAR file. Lets say the app is called Test.
In the j2ee/home/application-deployments/Test directory, a file will be created called orion-application.xml.
If you look in this file, you will see an entry which looks like
<log>
<file path="application.log" />
</log>
This defines the log file for this application.
Now if you want to setup log file rotation for this app, edit the orion-application.xml file and firstly, comment out the above.
Note: you can leave the log tag in if you wish, but you'll get double log messages. Remove it if you do this in production and are trying to conserve space ;-).
Then add in the below to setup ODL based logging for this application:
<log>
<odl path="logdir"
max-file-size="1000" max-directory-size="10000" />
</log>
What this does it to tell OC4J to output the log messages using it's ODL format model, to create a directory called logdir (in the current directory) and then to start writing to log files called log.xml in that directory.
The max file size of log.xml is 1000KB, and the max directory size of the new logdir directory will be 10MB.
The ODL logging system will manage the log files in this directory according to these constraints -- when a log file gets bigger than max-file-size it gets archived as logN.xml. When the overall directory size gets bigger than the max-directory-size specified, the oldest log file from the list is removed so that the max directory size is honoured.
I don't think we can specify a rollover period (ie one day) with ODL. I'm pretty sure it's just file size based only.
I think the above should apply to Portal since it runs on OC4J. In which case, you'd change the orion-application.zml in the <ORAHOME>\j2ee\OC4J_Portal\application-deployments\portal directory instead of j2ee/home/application-deployments/<app-name>.
However, I can't speak officially for Portal since I don't work with that product. From a pure OC4J perspective the above holds true and works.
cheers
-steve-

OC4J_Portal_default_island_1/application.log

Hi ,
i cannot find this file in my portal installation , i am using Oracle Portal Version: 10.1.2.0.2 (Build: 139)
$ORACLE_HOME/j2ee/OC4J_Portal/application-deployments/portal/OC4J_Portal_default_island_1/application.log
this file is important to me to generate performance reports from the portal where can i find this file?

It is quite simple to see where that file would be provided it has not been deleted and that the OC4J_instances were created using EM or by default installation.
Go to Enterprise Manger and Middle-tier; see which component is listed with a name like OC4J_ , eg. OC4J_Portal or OC4J_Custom, etc.
The file-system architecture for this application log file in an OC4J_Instance is as follows:
ORACLE_HOME\j2ee\OC4J_InstanceName\application-deployments\OC4J-AppName\OC4J_InstanceName_default_island_1\application.log
For instance, in the following cases:
Instance            OC4J_InstanceName    OC4J-AppName   location
infrastructure        OC4J_SECURITY           SSO               %ORACLE_HOME%\j2ee\OC4J_Security\application-deployments\sso\OC4J_Security_default_island_1\application.log
middle-tier           OC4J_Portal             Portal            %ORACLE_HOME%\j2ee\OC4J_Portal\application-deployments\portal\OC4J_Portal_default_island_1\application.log
middle-tier           OC4J_Portal30           Portal30          %ORACLE_HOME%\j2ee\OC4J_Portal30\application-deployments\portal30\OC4J_Portal30_default_island_1\application.log
BI-Discoverer         OC4J_BI_Forms           Discoverer        %ORACLE_HOME%\j2ee\OC4J_BI_Forms\application-deployments\Discoverer\OC4J_BI_Forms_default_island_1\application.logMake sure that you are looking at the right instances and applications.
Also note that on unix machines, all addresses are case-sensitive, and forward-slashes should be replaced with back-slashes.
hope that helps!
AMN

Log messages for 'auditing' are different in 'general' and'application log

Hi,
From UI, When I audit a file using a profile which comprises of user-defined 'rules/categories/analyzers', I will get log messages at ''File-name(Application) log window' and 'Messages' log window, which are located at bottom of Jdev UI page. One common message in both the log windows is
" <n1> violations, <n2> exceptions, <n3> documents, <n4> seconds>.
But here the 'n1,n2,...' numbers are dfferent in two windows though the log output is for a same file. In this the 'file-name' log shows the correct
Example:-
In 'file-name' log window ,it shows as:
3 documents, 8 violations, no exceptions
In messages window, it shows as
"Audit starting on EFC.jpr (Default)
Audit completed: no violations, no exceptions, 3 documents, 1 second"
If I use the 'pre-existed'(Jdev's) rules profile, I will get similar output in both log windows.
From this I concluded that there is something missing to register for a new 'rule/category/analyzer'.
Could you suggest me in this case. Do I forgot anything to do in any files of '<rule-implementation.java>', 'audit.properties', <add-in launcher>.java, extension.xml.
Actually, I want to use 'ojaudit' executable from command line to my project files. Here I observed that the output of the 'ojaudit' is similar to the above explained 'Message' log window in JDeveloper UI. But where the 'Message' log window output is not correct for user-defined rules.
Regards
Madhu

Romano,
In the upcoming production release (planned to be released next week), we added caching of authorized roles and permissions in JhsAuthorizationProxy class.
I suggest you wait for this relase, if the problem persists, it is most likely an ADF issue (as is the logging)
Steven Davelaar,
JHeadstart team.

Tcode for Infotype log in Personnel Administration

Tcode for Infotype log in Personnel Administration

Hi Santhosh
as shared by our mates,for audit trail u can check this
To track the changes in the SAP HR system we have the SAP standard report for that.
Log report: RPUAUD00
Please do the entries in the below table to activate the log report:
V_T585A
V_T585B
V_T585C
ABAP programs RSTBHIST or RSVTPROT can be used to analyze table changes
Thanks to the contrbutors -Audit Trail is used to track the record changes
http://saperphcm.blogspot.com/2010/07/audit-trail-is-used-to-track-record.html
No Worries
KG

What is the Tcode for Web Analyzer

Can any one let me know if there is any Tcode for Web Analyzer?
thanks in advance

The BEX Web Analyzer is a standalone Web application that can be called using a URL by specifying the template 0ANALYSIS_PATTERN (standard Web template for ad hoc analysis).
You can also call the BEx Web Analyzer as an iView in the portal.
http://help.sap.com/saphelp_nw04s/helpdata/en/0d/af12403dbedd5fe10000000a155106/content.htm
Hope it Helps
Chetan
@CP..

Error in application log for transaction FPSA

Dear Colleagues,
The application log for this transaction returns the following message,
'Run SELA 15.01.2008 V00001 is not ready
Message no. >REP 014
Diagnosis
The run was probably terminated as a result of an error
System Response
The interval was not processed.'
How to view the error which resulted in termination of the run.
Many thanks for your attention. Hoping an early reply to this problem
Venkat
+49 175 8916067

Hi,
If agent is installed on the VMM server, it will collect the information and send it to SCOM server. The event indicates the SCOM agent tried to access the registry key that was included in the User Profile but failed.
Please specify a local account or domain account as the SCOM action account for a test.
Niki Han
TechNet Community Support

Transaction for application log

Using IDOCS. One has errored but cannot get into application log as pop up not appearing (memory issue or something) for me to double click the log number and go into the application log to view it. Does anyone know the transaction or menu path to access the application log direct so I can see what the error is about?
Many thanks
Larissa

Hi,
USE SLG1 Transaction.
Thanks,
Naga

Application logs for log handling in lsmw idoc method

Hi Abapers,
Im using LSMW IDOC method for data transfer from legacy to sap system.Now the requirement is to handle application logs for log handling i.e i have to make use of custom report to handle logs,can any one tell me what all steps to be done for this or if any one can share a link related to application logs would be greatly appreciated.
Thanks.
Edited by: saeed.abap on Dec 27, 2011 5:13 PM

Hi Saeed,
Please check with this fms
1) BAL_DSP_LOG_DISPLA
2) APPL_LOG_READ_DB
3) IDOC_GET_MESSAGE_ATTRIBUTE
There is a wiki [Error Log Lsmw|http://wiki.sdn.sap.com/wiki/display/Snippets/ErrorLogProgramforBAPIandIDocMethodin+LSMW] available.
Regards,
Madhu.
Edited by: madhurao123 on Dec 28, 2011 8:25 AM

Tcode for Analyze application log

Similar Messages

Maybe you are looking for