Tcode for the zreport

t-code FGI3 , there are several reports , i created 1 zreport and wants to create the tcode .
Tcode SE93 , and i created the tcode as trans report (added the program name and the screen number )
Now the issue is when i run the tcode , there are 3 divisions , the 2 divisions are exactly as it is in the zreport but the 3rd part which should say "output types" is different and has different data all together.
Can anybody throw some light on it . How do i get the report from tcode exactly the way it is in the zreport .
Help will be appreciated .
Sumit
Edited by: sumit123 on Feb 15, 2010 10:13 AM

okay, i reframe my question .
i created a tcode for the zreport and it is not displaying all data as it should display .
there are 2 ways of reaching the report .
1) tcode FGI3(there are several reports here ) and then select the zreport and click execute , but we do not want to give this path to users , instead we want to give the tcode for the zreport
2) the other way to reach the report is by the tcode that i created .
The issue is tcode does not display the entire data .
Sumit
Edited by: sumit123 on Feb 15, 2010 10:35 AM

Similar Messages

  • How to find out the Tcodes for the exits

    Hi All,
    how to find out the Tcodes for the exits. i have a list of exits (customer, user, badi ). i need to find out what are the Tcode affected by this exits.
    Customer Exits: EXIT_RFEBBU10_001
                              EXIT_RFEKA400_001
                              EXIT_RFFOEXIT_100
    User-Exits:  USEREXIT_DELETE_DOCUMENT
                       USEREXIT_FIELD_MODIFICATION
                       USEREXIT_MOVE_FIELD_TO_VBAK
                       USEREXIT_PRICING_PREPARE_TKOMP
    BADI: CUSTOMER_ADD_DATA_CS
              HISTORICAL_VALUES
              MD_ADD_ELEMENTS
              MD_CHANGE_MRP_DATA
              MD_PIR_FLEX_CONS
              MD_PLDORD_POST
              ME_REQ_POSTED
              NOTIF_EVENT_SAVE
    Can anyone help on this <urgency factor removed>.
    Regards
    Ksihore
    Edited by: Suhas Saha on Feb 20, 2012 12:58 PM

    i have just started reading about all these-user exits ,customer exits etc.
    i have read somewhere that:call to customer exits are triggered by function modules exits.
    the structure of function modules are like this:
    EXIT_RFEBBU10_001
    MEANS
    Keyword EXIT followed by program name fllowed by three digits.
    and the call is like this:
    call customer function 0001.
    From above we can conclude that this customer exit must be used in program RFEBBU10.
    GOTO SE38 andenter prog name RFEBBU10.check for above function module.
    for the rest i stick to the same method for user exits and BADI that we can findthe corresponding TCODES
    using Where used lists.
    please Tell me if i m wrong!

  • Kindly let me know the Tcodes for the forms below in MM

    Hi Guru,
    Kindly let me know the Tcodes for the forms below in MM
    Form - Deviation Request form       
    Form - Spot PO (direct, indirect, subcontracting)
    Form - Purchase Scheduling Agreement (direct, indirect, subcontracting)
    Form - Contract (direct, indirect, subcontracting)
    Form - Delivery Schedule (Long + Short term)
    Form - Vendor Non-Conformance
    Thanks
    Siva

    Hi,
    You can get all the forms & output devices in the Transaction code.NACE.
    you can check forms,program, for other modules also.
    Regards
    Ravi shankar.

  • Tcode for the execution of function module

    Hi!
    A very simple question:
    What is the Tcode for the execution of function module? (Se38,???)
    I have to execute  the function module RRSI_INITIAL_LINE_INSERT with import parameter I_CHABASNM = 0REQUID.
    Thank you very much!
    regards
    Thom

    hi,
    You create new or edit Fm in SE37. You also put the code for that FM in SE37.
    You can call it through pattern button in SE38, where u pass the importing and exporting parameters of that Fm
    Hope this helps, Do rewad.

  • Tcode for the List of customers

    Hi All
    can any body tell me the tcode for the list of customers in the system

    go to change mode of customer master and enter f4 in the customer number column and enter u will get all the list of customers in the system
    rewards if it is helpful to u

  • How to find the tcode for the include's in user exit

    Hi
    I wanted to find the tcode for the given include name in the user exit.
    Can you pls help in this regard
    Regards
    Madhan Doraikannan

    Hello Madhan,
    Usually the include in the user exit is part of a function group which directly may not fetch u tcode. So the best option is..
    1. Get the FM name and check the table modsap. This will give u the enhancement name and related information which can help u with the tcode.
    2. to use the where used option which will lead you though multiple program till u reach the main program where u can search for transaction.
    e.g say u r trying to search include ZXM06U41  which exists in the FM EXIT_SAPMM06E_016. Now if u do a where used for this FM it will show program name MM06EF0C_CUSTSCR1_ITEM_SET_D03 if u again go for where used it will show u MM06EF0C. now if u click of the Display object list in the toolbar u will get the list of tcodes also.

  • Create tcode for the ztable

    Hi all
            I want to create the Tr. code for the zTable.
    For this i followed this navigation.
         From Se11
    Given the table name
    Clicked on change
    Clicked on Utilities
    Clicked on Table maintainence Generator
    Clicked on Environment
    Then It showing Transaction code in diabled mode
    How i can enable?
    Is it possibel to create the tcode for the table or not >
    If yes, How ? Plz clarify.
    Message was edited by: Prashanth Konda

    Hi Prashanth,
    If your purpose is to provide a T-code for entering values directly in to table without going to SE11 , create entries like that. Then What Sravathi suggested is the right approach . This is the standard approach to provide table maintenanance to the users who require it like Functional people and end users .
    1.T-code SE93
    2. Give the Tcode according your naming conventions.
    3.choose Create then it will ask for the description
    in the lower of the screen you can see 4 options select the last one .
    4.In the Transaction Input box give SM30 and make a check mark in the below check box , skip intial screen.
    5.In the end of the screen you can find subscreen lablled Default value
    select VIEWNAME in the column NAME OF SCREEN FIELD and in the next column type your Z-TABLE.
    If your requirement is to provide this T-CODE for inserting/modifying values then Type UPDATE in NAME OF SCREEN FIELD Column and the next column 'X'.
    If your requirement is to just show the table then you can select SHOW .
    <i>Hope This Info Helps YOU.</i>
    Regards,
    Raghav

  • How to find out tcode for the zprogram.

    Hi All,
    How to find out the Tcode of a Zprogram.
    I will appritiate your help.
    Thanks,
    Veni.

    Couple of ways to do this,  one is to go to SE93 and do F4 on the transaction code field, click information system,  click the all selections icon, then put the name of the z program in the field, and hit enter,  this will give you the tcode.
    Regards,
    RIch Heilman
    Message was edited by:
            Rich Heilman

  • Tell me the tcode for the values r coming into the table J_2IACCBAL?

    Hi expers,
    some values r wrongly entered in the J_2IACCBAL table.These values r coming from which tcodes.
    pls give me the tcode.

    Hi Ram,
    Please check the below link:[http://72.14.235.132/search?q=cache:5IeHcrP1C88J:help.sap.com/bp_bblibrary/470/Documentation/J33_BPP_32_CHEM_EN_IN.docuploadexciseregisterbalances&cd=1&hl=en&ct=clnk&gl=in]

  • What is tcode for the creation of function group

    What is the  transaction code to create the function group.

    The function group can be created in following ways.
    1.  in SE37. create the function group by using the menu path 'goto->function-groups -> create'
    2.  in SE37 give a new function module name and click on create.
         It will prompt you to enter the Function group and also to enter a short text.
    3. in SE80 (Object Navigator) select the Function from the dropdown list and give the Function Group name to create.
    Rewards if useful.

  • What is the tcode for creating a variant ??

    Dear Guru,
    I want to know What is the tcode for creating a variant  which is being used for SM30 's variant option .
    Because we have created a maintenance view and we want to run this trhough tcode..
    but dont know how to do it.
    pls guide through out the procedure.
    thanks & regards
    Saifur rahaman

    Hi,
    If you want to create the TCODE for the TMG you created you must go for Parameter Transaction
    Go to SE93
    Give your Tcode
    Click Create , select parameter transaction Radio Button
    In the Transaction Field Give SM30
    Check the Check box SKIP INITIAL SCREEN
    select your GUI support and SAVE
    in the space provided give F4
    Select        VIEWNAME and give your table name
    Select                  UPDATE  give it as X
    then SAVE
    Edited by: Prasanth Kasturi on Nov 25, 2008 6:54 AM

  • Tcode for data transfert

    Hello all,
    Does somebody can tell me how to know or to search wich tcode we must put in the field TCODE for the transaction SXDB ?
    For example, I want to upload vendor into SAP and in my text file, I put FK01 in TCODE in level BLF00 but SAP told me that this transaction code isn't supported !!!
    REGARDS.

    Hello,
    To see the hierarchies in ECC6 depends on the type of hierarchy that you want to look, for example:
    tcode for Product hierachy and category:
    sap menu->masterdata->products->maintain categories and hierachies
    For Profit Center tcode KCH6N
    For HR in several places.
    To see the hierarchies in BI tcode rsh1.
    Regards,
    Jorge Diogo

  • Alternative tcode for AL02 in ECC 6.0

    Hi All,
    AL02 is a tcode in 4.7, its obsolete in ECC 6.0 . i want the alternate tcode for this in ECC 6.0.
    can u suggest me some process to find such alternative tcodes for the obsolete one in the higher versions.

    Hi Nasreen,
    The new Tcode for AL02 is RZ20 in ECC 6.0
    Check this Wiki for the list of old and new Tcodes:
    https://wiki.sdn.sap.com/wiki/display/ERP6/TransactionsChangedinECC6.0
    Regards,
    Chandra Sekhar

  • Creating TCODE for ABAP Query

    Hello everyone! I have created my very first ABAP Query, but I still need to create/assign TCODE for the said report.  Can anyone help me with it? Somebody told me to use SE93.  I found out that there are 5 options in SE93 to create a TCode, I tried all options but I could not get through it because I was asked for a program name or a transaction.  What should I put in there? The query name?  Please help.
    Thanks!

    HI Ervyone! Got it Already. To Get the program name of the ABAP Query,
             1. Go to SQ01> Query Menu>More Function--> Generate Program
             2. Go to SQ01> Query Menu>More Function--> Display Report Name. Copy the Report Name that Will be displayed.
             3.  Go to SE93 Enter the TCODE that you want to use, then click on Create BUtton.  Choose the second option "Program 
                  and Selection Screen (Report Option)".  The next screen will ask for your program name,  Paste/copy the program
                  name and save it.
    Thanks!
    Edited by: Ksbaizas on Jun 22, 2010 3:19 AM

  • Assigning a Tcode for SQ02/SQ01 query

    Dear All,
    To create query i have used following steps
    1. In SQVI check the Infoset name associated with the query you are trying to run.
    2. Go to SQ02 using the infoset name.
    3. Select "Field Groups" on the toolbar. Add the field in this field group.
    4. Go to the "Code" tab on the next screen.
    5. Select "Code Section" as "Record Processing" and write the code to populate the
    column.
    6. Activate the Infoset and then activate the Query also.
    After this how to assign a tcode for the query
    pls explain in detail.
    Thanks.

    Hi,
       Follow the below mentioned steps:
    Go to Tcode SE93  give the name of the tcode which you want to be create. Give description in the next screen and select last or 5th radio button(Transaction with Parameters) and press enter in the next screen give the Transaction as START_REPORT,  next check the skip initial screen check box, next select all the GUI support check boxes, next in default values section D_SREPOVARI-REPORTTYPE = ‘AQ’(Give your own text), D_SREPOVARI-REPORT = your query name, then save it and check it.
    Cheers,
    Bujji

Maybe you are looking for