Tcode to find the load in server is 20 users run a particular ABAP program

I want to find the load in the SAP Server (in terms of CPU Usage, memory usage) if a particular Query or ABAP program is executed by 20 users.
Pls let me knwo the Tcode for the same
As per my understanding ST03 can be used to view the report of previous information only.

Balaji
You have the analyze the load while 20 users executing the following transaction code.
OS06 - operting system monitor and click on detailed analysis where you can monitor the various instances
if do you find the other transaction which will show you load of current program being used by 20 users, please share with the expert communitiy to help to other users.
REgards
Anwer Waseem

Similar Messages

  • Unable to find the workbook on server while accessing woekbook

    I am opening in query in Bex analyzer
    After getting the result , I am saving the file as workbook in favourites folder
    It is not giving any error. When I try to open the workbook It shows me the name in the favourites folder, but gives error "Unable to find the workbook on server"
    If I close the Bex analyzer and open again, its now showing the file in favourites folder meaning file was not saved on the server. I tried with sap_all authorization
    Please help

    Hi,
    I got the same problem as yours. But if "sap-all" given, it works. I do not want to give this authorization to all users, so would you pls tell me your final solution?
    Thanks a lot.
    BR.
    Angela

  • Finding the right SMTP server

    Hi there,
    I'm trying to send a simple email from a servlet but when I do so I get an exception because SMTPTransport can't connect to localhost on port 25. I'm just using the reference implementation server that comes with J2SDKEE1.2.1 (on Windows XP) and have downloaded the relevant jar files for JavaMail and Jaf, included them in the classpath, etc.
    Should I be trying to direct it to a different SMTP server or port, and if so how do I find out where they are?
    Any help would be greatly appreciated!
    Rory.

    You have to know the address of the mail excange server of the person
    whom u are sending email,it can be found doing dns query for the host.
    For example if u want to send email to : [email protected] then u have
    to find the mail exchange server address of AOL.U can find this by
    DNS tools,you can find one at http://www.sourceforge.net .
    when u get back the name of MX(mail exchange Server) from dns look up
    then u have to this.
    props.put("mail.smtp.host", smtpServer);
    where the smtpServer is the mail exchange server name for the Host.

  • Where can I find the reports multitier server (reports 3.0)?

    Can anyone please tell me where can I find the reports multitier
    server 3.0.4.6.3?
    When I try to install the reports 3.0.4.7.0 from the patch 0598
    (pat0598.exe) it tells me that I must have installed the reports
    multitier server 3.0.4.6.3. But I can't find it anywhere, not
    even on the original installation CD.
    I have on disk the file r30mts32.exe. Is this the so-called
    reports multitier server? Is reports multitier server = reports
    server = r30mts32.exe? If so, why is that error occurring?
    Can someone please help me on this?
    Thank you.
    Paulo Ferreira
    null

    I agree and find it odd, but then, there is only the most rudimentary and superficial 'notes' -
    iTunes 9 also includes many other improvements, such as HE-AAC encoding and playback, more flexibility with Smart Playlists rules, simpler organization of your media files inside an iTunes Media folder, and more.
    Nothing like "fixed bug with using..."

  • Tcode to find the fields ,tables based on description of fields

    hi folks,
    tcode to find the fields ,tables based on description of fields,POINTS  will be awarded for the answers ,plz give reply.

    Hello Kumar
    Table DD03T contains the field descriptions.
    Regards
      Uwe

  • Tcode to find the availability of temporary positions for specific org unit

    Hi all,
    What is the tcode to find the availability of temporary positions for specific org. unit??
    Thanks
    Jerry

    PPIS
    this tcode select the orgunit and positions once

  • Unable to find the workbook on server after applied Package 13 NW2004S

    Dear guys,
    Yesterday we applied NW2004S Package13, and today we found that for user without SAPALL authorization, they got "Unable to find the workbook on server" when accessing workbook in roles. But for user with SAPALL, the workbooks still work fine.
    I searched the forum and found similar problems for users migrated from 3.x to 7.0. However, ours is 7.0 and is not migrated.
    The bex version:
    BI AddOn 7.x(based on 6.40), SupportPackage 14, Patch3, Revision811
    Pls help. sorry for having no points to assign since I am new here...:)

    Hi,
    on thing I noticed... SP 13 is not that stable...
    Hint: ask your technical guys to implement support pack 14... I think your problem will be solved then... because you say you only have this problem since you upgraded...
    Ciao
    Joke

  • Where can I find the Load Simulator tool?

    Where can I find the Load Simulator tool?
    Thank you,
    Chip

    Hi Chip,
    All the tools currently available are located here:
    http://www.adobe.com/go/fms_tools
    HTH,
    Jody

  • How to find out BPEL process server is up and running?

    Hi All,
    We are invoking a synchronous BPEL process from our application.
    Incase of any network failures, we want to switch to other flow.
    Is there any way to find out the BPEL process server is up and running?
    Thanks,
    Uma.

    Try accessing the dynamic wsdl (http://server.com:7777/orabpel/default/service/1.0/service?wsdl)
    from your application. If there's no error opening this page using http get, the server is alive :)
    Marc

  • Installed the RDS 2012 Server License per user CAL (5pcs) after not allow over two users remote desktop connection problem

    I have successfully to installed the RDS 2012 Server R2 per user CAL (5pcs) Open License after is found not allow over two users to remote desktop connection on this Server problem, I try to uninstall the license and then (internet on-line & telephone
    call Microsoft Activate Center get the activate key) to reinstall is still same of the result on below problem.
    Select a user disconnect so that you can sign in.
    There are too many users signed in
    User1 Active
    User2 Active
    () Force disconnect of the user

    Hi,
    In addition you can also refer following article for RDL configuration.
    RD Licensing Configuration on Windows Server 2012
    http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How do I find the unix system is in single user mode  ?

    How do I find the unix system is in single user mode ?
    thanks
    siva

    Please run 'who -r', and then check the man page of 'init' for interpreting the run level output.

  • How to find the status of package (valid/invalid) was at a particular time

    How to find the status of package (valid/invalid) was at a particular time ?
    I want to find the status of one oracle package at 3pm yesterday. The status of this package today is INVALID.
    I am sure it was VALID yesterday. But no way to prove it. Can any one help please???
    I can generate AWR report for last 7 days...

    Try using a flashback query, like this:
    select object_name, object_type, status
    from dba_objects AS OF TIMESTAMP (SYSTIMESTAMP - INTERVAL '18' HOUR)  -- 18 hours ago
    where object_name = 'MY_OBJECT'
    ;if you haven't granted FLASHBACK privs, you may need to connect as SYS to do a flashback query on a data dictionary table.
    But this should give you the info you need - if it's still in undo.

  • Rmi and classloader: some server instances can not find the class on server

    Hi:
    I want to migrate my rmi applications from JDK 1.1 to JDK1.2.2. It exists in the following environments:
    - there is one authentication server and many application servers, all have binded in the main method
    - dynamic loading of the server stubs and interfaces is not used; they are local on the client.
    - security manager is enabled only on the server site and the policy file is created.
    - all server classes, stubs and interfaces are in the same directory on server site
    - the registry and the server are started as follows:
    unsetenv CLASSPATH
    rmiregistry 1103 &
    setenv CLASSPATH ~usr/serverDir:~oracle/jdbc/lib/classes12.zip
    java -Djava.rmi.server.codebase=file://~usr/serverDir/
    -Djava.rmi.server.hostname=myHost -Djava.security.manager myServer
    After starting the client, the rmi client connects to the server and the authentication request comes back with a list of applications.
    When the user chooses one of them, the rmi sends the request to thatapplication (e.g., OMSRmiServer_Stub). The application could not find the other class on the sever directory: (the authenication server can find the same class)
    java.lang.NoClassDefFoundError: JOMPrepStatement
    at java.lang.Class.getFields0(Native Method)
    at java.lang.Class.getFields0(Compiled Code)
    at java.lang.Class.getDeclaredFields(Compiled Code)
    at java.io.ObjectStreamClass$1.run(Compiled Code)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.security.AccessController.doPrivileged(Compiled Code)
    at java.io.ObjectStreamClass.<init>(Compiled Code)
    at java.io.ObjectStreamClass.lookupInternal(Compiled Code)
    at java.io.ObjectStreamClass.lookup(Compiled Code)
    at java.io.ObjectStreamClass.lookupInternal(Compiled Code)
    at java.io.ObjectStreamClass.lookup(Compiled Code)
    at java.io.ObjectStreamClass.lookupInternal(Compiled Code)
    at java.io.ObjectStreamClass.lookup(Compiled Code)
    at java.io.ObjectStreamClass.lookupInternal(Compiled Code)
    at java.io.ObjectOutputStream.writeObject(Compiled Code)
    at sun.rmi.server.UnicastRef.marshalValue(UnicastRef.java:256)
    at sun.rmi.server.UnicastRef.invoke(Compiled Code)
    at OMSRmiServer_Stub.executeStringSetSelect(Unknown Source)
    at OMSDeviceRmiClient.getStatusLOV(OMSDeviceRmiClient.java:196)
    at OMSRmiClient.getStatusLOV(OMSRmiClient.java:76)
    at OMSDevicePane.listenToTree(Compiled Code)
         at OMSDeviceContextPane.initComponents(OMSDeviceContextPane.java:107)
    at OMSFrame.jomInit(Compiled Code)
    at JOMCountFrame.init(JOMCountFrame.java:190)
    at JOMCountFrame.run(JOMCountFrame.java:253)
    at java.lang.Thread.run(Thread.java:485)
    Any help is appreciated.
    - Mahan.

    in jdk1.2.2 no need classes12.zip in class path.
    just set CLASSPATH=.;
    that is enough for solving ur problem
    bye
    raghu

  • Where can i find the IPlanet Messaging Server API

    I am trying to log a user into the IPlanet Messaging Server when the user logs into the IPlanet Portal Server. I would like to create a SSO effect between the portal server and the messaging server.
    Thanks

    Check out the documentation for PMDF API and SIMS API. The MTA comes from PMDF. I just did a quick check and could not find out when documentation will be out regarding iMS-MTA API.
    For what you want to accomplish I don't think the MTA-API is where you need to be looking. I know that ME and iDA SSO can be enabled, and I think it can be done with Portal as well, but I do not know how.

  • Why can't safari find the democracy now server but it can find all the other 20 something servers in my bookmark bar?

    I never had problems opening "democracynow.org" up until a few weeks ago. Now I can't get it at all on my computer. It is the same message, "safari can not find the server." I can get it with my mothers computer in the other room.

    Do you see the folder if you are using the system navigator instead of the application navigator in JDeveloper?
    Check your project properties->content and sub nodes to make sure the TopLink directory is included in the project.

Maybe you are looking for

  • Screen frozen

    When I boot up I get a white screen with the apple watermark and then it just freezes there.  Help?

  • Use of greater than, less than and ranges in release strategy

    Hi, We are using release strategy on purchase order level. We have added purchasing group as one of the characteristics of this release strategy. As we have many purchasing groups in place we want to work with ranges of purchasing groups and also mak

  • Dynamically changing the name of a page item

    Hello, I'd like to dynammically change the name/label of a page item depending on the user who logged in to the system. On my home page, there's a navigation region with some list entries in it. Currently its title is "Configuration". If a specific u

  • Using the Java APIs

    I am attempting to use the java api in my reporting solution. The application that we are developing is using JSF and java. I wanted to keep the same look and feel for my reports. First, I created a very simple rtf template in Microsoft word using BI

  • Perl: Can't exec "make": No such file or directory

    I'm trying to install Perl modules using the Mac Terminal with cpan and keep getting the message "Can't exec "make": No such file or directory" e.g.:   CPAN.pm: Going to build I/IN/INGY/YAML-0.90.tar.gz Checking if your kit is complete... Looks good