TCP error 66
Hi
I use LV 7, version 7.0 on a Windows XP machine. I am using TCP/IP vi's to read data over the LAN. I am able to receive the data over the LAN, but I keep getting error 66 in the TCP Read.vi
My VI stops after running for 8-9 hours. HOw can I avoid that error 66? Also, I am not saving any of the data that I am receiving. I am not using array or build string functions. I just read 1029 bytes of data continuously. What am I doing wrong? How can I get rid of error 66? Any help is greatly appreciated.
Thanks
Hello,
I came across the form and thought of sending
you a reply since I have a similar issue as you had (5 years back
I have a Server on which I am
running a Java Program which is sending a simple string to the Client
machine which has LV running in it. I am trying to establish a simple
TCP/IP
connection with local host itself. The Server(Java) program is sending
a
string(example: Hello123456), I am receiving only a part of the
string(ello123456) on the Client(LV) program. I am also receiving an
error, "Error 66 occurred at
TCP Read".
I am sure
that the peer side of the code(Java) does not close the connection, because I
have kept enough time sleep time before it attempts to close the connection.
I have also changed the options at Tools-> Options->VI Server
with Port = 0 and enabled the TCP/IP connection.
I have attached a screen shot of error received (using Probe) and the Vi.
Regards,
H
Attachments:
TCPClient.vi 11 KB
ClientVi 112 KB
Similar Messages
-
Hi Everyone,
I am running two executables that are communicating with different bits of hardware over TCP Connections.
I am having problems with one of the executables TCP Connection to a printer.
I will be able to send commands to the printer to print labels for hours on end and then suddenly I get an error saying that the label failed to print. (I don't log that specific TCP error at the moment.)
At this point usually several other printers will all experience the same problem and stop printing.
If I close down and then restart the executable that deals with those printers, I get a TCP Error 61 (Serial port parity error or The System could not allocate the necessary memory) when I do an initial startup connection to a MySQL Database that I am using. (I'm not sure whether to believe this error or not since the PC should have plenty enough memory.)
But this means that my executable will not startup successfully.
If I stop both the executables that are communicating over TCP and restart them, I get no errors and my printers start printing labels again.
So, great labview gurus, do you think that this problem is
1. more likely to be caused by my software (and if so why)
2. a strange memory error or
3. some other funny thing happening to the network when my printer first reports an error that I have no visibility of or
4. Something completely different
Many thanks in advance for any help or advice!
Sam
Labview 7.1.1
MySQL DB 4.1.16
5 years Labview experienceHi Jon,
Yes, all the applications are running on the same computer and the port they are trying to talk to is a local port on that computer.
To give a bit more information, the applications are all running on the Server PC which is hosting a MySQL database. The applications are all trying to talk to the same local port (127.0.0.1:3306) to gain access to the MySQL Database to run separate queries.
When I say i tried to telnet into this port, it is a diagnostic I use to try to determine if the port is open to connections. In this case instead of allowing me in, it threw back an error saying that the connection could not be opened. The connection was only allowed after I had shutdown all the labview applications that were running.
Please let me know if you need any more information, I do very much appreciate the help
Sam -
We are using windows server 2012. In the following error showed when running application. this application depend on TCP port 808 so I have included it windows firewall inbound role also... so pls suggest me...
""Could not connect to net.tcp://192.168.1.4/FACTERPNGWebServer/Alert.svc. The connection attempt lasted for a time span of 00:00:00.9990571. TCP error code 10061: No connection could be made because the
target machine actively refused it 192.168.1.4:808. """Hi
Read the below article
They suggest running netstat -anb as soon as the application is executed to ensure the correct ports are opened.
http://stackoverflow.com/questions/9695224/no-connection-could-be-made-because-the-target-machine-actively-refused-it-127-0
Quote : "Actively refused it" means that the host sent a reset instead of an ack when you tried to connect.
hope this helps resolve your issue as this resolved it for these users. -
WCF-NET TCP Error when processing X12 file
Hi ,
Is it that WCF-NET TCP adapter only processes Xml file? I am trying to send x12 message through Send port wth Passthrough Pipeline and Net-Tcp configuration, but fails for invalid root node error: (below)
Send Port is subscribing to a Receive Port which has pass through on receive with File adapter ( I don't want to do EDI receive when receiving this file - just to convert it to Xml)
A message sent to adapter "WCF-NetTcp" on send port "port......._InputPassThru_snd" with URI "net.tcp://localhost:808/totemp" is suspended.
Error details: System.Xml.XmlException: Data at the root level is invalid. Line 1, position 1.
at System.Xml.XmlTextReaderImpl.Throw(Exception e)
at System.Xml.XmlTextReaderImpl.Throw(String res, String arg)
at System.Xml.XmlTextReaderImpl.ParseRootLevelWhitespace()
at System.Xml.XmlTextReaderImpl.ParseDocumentContent()The thing is, if you're using the WCF Net-TCP adapter, the receive is expecting a SOAP formatted message over TCP. The Net-TCP binding is 'binary' because there is no encoding layer, but the message is still SOAP.
If you really need to send binary data over TCP, you would use the BizTalk TCP/IP Adapter from CodePlex:
http://tcpipbz2010.codeplex.com/ -
Wait on TCP errors w/o time out (error 62) on VxWorks
Hi,
I have a service request running with this one but I wondered if you could try to reproduce the issue as NI has so far been unable to reproduce it. I have attached the sample code. I have made a screencapture but that seems too large to upload. I will try to get the size down.
When trying to open a tcp listener on a port which an external application is already trying to connect to while the software is starting up this will result in an error 62 when waiting on the listener. The wait is not going to wait the defined timeout. Surprisingly though even though the listen vi seems to get bypassed without waiting it will pick up a connection if the external application tries to connect and will accept the data without fault.
This is a problem with potentially catastrophic result as the correct behaviour of the application relies on the mercy of the sender not trying to connect while the software is starting up.
I have tested the behaviour on a sb-rio 9605 and a crio 9074 (example attached)
I have tried on LV2012 and 2013 with August and February drivers.
Steps To Reproduce :
Please look at attached examples. Adjust the the ip address of your target both in the project and in the client vi. First run the server vi and then start the client vi. The interesting output can be seen on the server front panel. You will see expected behaviour in that the iteration counter goes up when the listener times out or gets a connection. The transmission indicator goes up when a connection is established. Now stop the server by pressing the stop button and relaunch it. This way the client is already running and trying to open connections while the software starts up. You will see the iteration counter erratically go up and the transmission indicator go up when ever the client tries to connect.
Source of problem:
I have now pinned the problem down to the "create listener". It seems that a "corrupted" listener gets created when the network buffer is not empty. The listener gets created without error and works when there is an inbound connection but shows the erroneous behaviour when nothing is coming in. The problem can get worked around by closing and re-opening the listener in case of an error 62.
looking forward to your feedback
best regards
Mathis
CLD
Attachments:
tcp problems.zip 13 KBAnother attempt on uploading that video. This time wrapped in a zip file ...
Attachments:
screencapture-1.zip 906 KB -
Internet Toolkit 6.0.1 and TCP error 66
FYI for anyone interested. I just experienced a problem upgrading Internet Toolkit from 6.0 to 6.0.1. (I also upgraded LV 8.2.1 to LV 8.5 concurrently). I am using "URL Get HTTP Document.vi" to get a small (1KB) text file from the web server, and it gave me error 66 when I upgraded, whereas it was working perfectly before. Switching back to version 6.0, it is now working again with LV 8.5. I've wasted enough time on this one and don't have the patience to dig further, but the error occured in the "TCP Buffered Read.vi" component. I did a VI comparison on both of these and nothing changed between versions. Error 66 presumably has something to do with this.
--David Moerman
Solved!
Go to Solution.The same message with the links to the images.
Hi David Moerman. This error occurs in the VI "TCP Buffered Read.vi" (found at LabVIEW-directory\vi.lib\addons\internet\utils\tcputil.llb\TCP Buffered Read.vi). In the image below, you can see the original VI code and the problematic portion (highlighted).
There are two possible workarounds for this problem.
Workaround 1: change the number of bytes to read (replace 1024 by 1). Look the image below.
Workaround 2: change the behavior of the read operation with the parameter mode. Is this case, the parameter value was modified to "CRLF". Look the image below.
I hope this help.
My regards,
Vinicius -
Java2Java HTTP-Connection - TCP error???
Hello,
I'm trying to do a stress-test on a java webserver...
What do I do: I have a HttpServer with some nifty classes that generate some nifty site and make excessive use of the word "nifty"... but let's drop that :-)
On the other hand, I have this simple code:
URL url = new URL("http://localhost:10000/");
HttpURLConnection huc = (HttpURLConnection)url.openConnection();
DataInputStream dis = new DataInputStream(huc.getInputStream());
while (dis.available() > 0) dis.readChar();
dis.close();
if (huc.getResponseCode() != 200) System.out.println(huc.getResponseCode());
huc.disconnect();
if (i % 100 == 0) System.out.println("Thread "+this+" "+i);Binding the webserver on port 10000 and running this piece of code results in this error:
java.io.IOException: Premature EOF
at sun.net.www.http.ChunkedInputStream.readAheadBlocking(ChunkedInputStream.java:538)
at sun.net.www.http.ChunkedInputStream.readAhead(ChunkedInputStream.java:582)
at sun.net.www.http.ChunkedInputStream.read(ChunkedInputStream.java:669)
at java.io.FilterInputStream.read(FilterInputStream.java:116)
at sun.net.www.protocol.http.HttpURLConnection$HttpInputStream.read(HttpURLConnection.java:2370)
at sun.net.www.protocol.http.HttpURLConnection$HttpInputStream.read(HttpURLConnection.java:2365)
at sun.net.www.protocol.http.HttpURLConnection$HttpInputStream.read(HttpURLConnection.java:2354)
at java.io.DataInputStream.readChar(DataInputStream.java:346)
at testFrame.HTTPStressTestItem.run(HTTPStressTestItem.java:42)
at java.lang.Thread.run(Thread.java:619)Well, I tried a bit of this and a bit of that and finally took wireshark to look at what actually is send.
The captured packages start quite normal with som SYN, ACK and FIN packets.
The first interesting packet is the HTTP request doesn't look too bad.
GET / HTTP/1.1
User-Agent: Java/1.6.0_02
Host: localhost:10000
Accept: text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
Connection: keep-alivebut was really stunned me was that Whireshark told me: Checksum: 0xfec2 [incorrect, should be 0xfde2 (maybe caused by "TCP checksum offload"?)]
Ok, one ACK, than the first reply packet:
HTTP/1.1 200 OK
Transfer-encoding: chunkedLooks ok, but: Checksum: 0xfe57 [incorrect, should be 0x4f87 (maybe caused by "TCP checksum offload"?)]
And after another ACK, the next reply packet contained the whole HTML-code the server was supposed to produce (It's not so big yet, so it fit's in one packet)
but: Checksum: 0xff05 [incorrect, should be 0xc99e (maybe caused by "TCP checksum offload"?)]
What the **** ?
Has Wireshark gone insane or is java producing incorrect TCP packets?Hi,
nafur wrote:
Looks ok, but: Checksum: 0xfe57 [incorrect, should be 0x4f87 (maybe caused by "TCP checksum offload"?)]
And after another ACK, the next reply packet contained the whole HTML-code the server was supposed to produce (It's not so big yet, so it fit's in one packet)
but: Checksum: 0xff05 [incorrect, should be 0xc99e (maybe caused by "TCP checksum offload"?)]
What the **** ?
Has Wireshark gone insane or is java producing incorrect TCP packets?Wireshark gives you a hint about the incorrect checksum: "TCP checksum offload". This means, that the operating system is released from the task to compute a correct checksum, as the hardware (or firmware) on the ethernet chip will do it. However Wireshark is capturing the packets before they go to the chip. so it sees the wrong checksum. Anyway. the packets are sent with the correct checksum.
Martin -
I occasionally get an error 42 in TCP read vi. This error is not listed in the Labview 5.1 help or on this site. Does anybody have an idea of what is happening?
LabVIEW uses error 42 to mean "Generic Error." You can actually find what errors mean by going to Help>>Explain Error... and entering the error code. However, that does not help us too much here! The only information I could find relating error 42 to TCP was this KnowledgeBase which associates the error with trying to open a remote session through firewalls or proxy servers. You might want to check that out and see if it's relative to your situation.
J.R. Allen -
One thread is doing hairy math problems (500x500 CDB matrix inversions and stuff), and posting results into a queue. After it posts results, it proceeds with the next math problem.
Another thread picks up the results from the queue, opens a TCP connection to another thread (on the same machine or a different machine), and transmits the results, after converting them to a string.
The results might be 50-100 kBytes.
The transmit thread opens a connection, transmits a header and a block(of 1024), a header and a block, a header and a block, etc. until done.
The receive thread waits on a connection, then receives a header (fixed size), then a block (described by the header), a header and a block, a header and a block, etc., until done.
All TCP operations use a timeout of 200 mSec.
The trouble is, I�m getting receiver errors (56 = timeout), that the transmit side doesn�t see. The transmit side is set to detect an error, and re-do the whole thing later if an error occurs. That has previously proven to be working. But now, I have cases where the receive side reports an error (56), but the transmit side doesn�t know about it, so my code fails.
I thought that an error on the receive side would be reflected back to the transmit side. (guaranteed delivery?)
Should I jack up the timeout value and hope for the best?
Should I implement an acknowledge reply scheme?
Other ideas?
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And TricksThe transmitter: transmits a header and a block, wait for feedback, transmits a header and a block, wait for feedback, and so on...
The receiver waits on a connection, then receives a header, then a block, then send feedback, and so on...
I really don't want to do it that way. I thought the job of the TCP / IP layer was to handle this feedback. For the most part, the data moves really fast - 10 mSec or less for the whole thing. I don't want to bog that down with a handshake on every block. I suspect that it's being delivered from OS to OS, but the problem is getting it into LabVIEW. That would explain why there's no error showing up on the transmit side.
I'm thinking of implementing an overall feedback - if I received the whole 50
k-100k bytes successfully, I'll send a feedback packet down the same connection. If the transmitter doesn't get the feedback within X mSec after sending the last packet, it will put it back into the queue for re-transmission.
In my case it's not important to get it there soon, but important to know that it gets there.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks -
Hello,
I am having trouble with MODBUS TCP communication. I am trying to read the input registers on a master.vi after a slave.vi has written to it. Attached you will find my slave and master vi's. I have made sure I had the correct IP address, same starting address for master and slave, and also the same port number. The input register is array size 4 and I've also wired that in on the master for the quantity to read. Could someone please give me some pointers?
Greatly appreciated!
Attachments:
Master.vi 15 KB
Slave.vi 13 KBI found my problem. I was missing the TCP communication in the slave.vi.
Thanks -
Hello everyone,
I have attached two vi's that communicate between my HMI and FP module using TCP/IP. Is there any reason why my connection would not re-establish after being broken e.g loss of power to the PC or even pulling the the network cable out.
The error Code is usually 63 -
LabVIEW: Serial port receive buffer overflow.
LabVIEW: The network connection was refused by the server.
I have VERY little experience in TCP/IP and am not sure on how to overcome this problem. Any hints and tips would be greatly appreciated.
Thanks
Attachments:
HMI_TCP_Comms.vi 57 KB
RT_TCP_Messages_Manager.vi 77 KBI have been testing your code (after having done some modifications to your code as I do not have a FP module available) on two PCs that both are connected to the same network switch. I notice that you use very short delays in the VIs especially if the network connection cannot establish after e.g. the network cable was unplugged. After unplugging the network cable from one PC and putting it in again (disconnection time was about 30 seconds) the TCP/IP connection was not re-established and I had to power off the switch and power it up again (The switch was dead.). Then the network connection was reestablished.
To make the HMI..VI smarter, I inserted a delay of 1000 ms that only executes in case of a TCP error. (The delay might be even too few depending on your net
work and the associated hardware.)
Your RT..VI is configured to create a listener for an incoming connection for 1000ms. I had to create a similar scenario than yours at the end of 2003 with a cFP-2020 and - to my experience - it typically will not reliably catch a listener in a that short timeout. If I remember correctly, none of the networking timeouts I specified on the cFP-2020 were less than 10000 ms and all of the networking VIs and functions that I used were placed in "background priority" VIs.
As you see: I do not have a solution for your scenario, but I hope that this was helpful. -
Hi, everyone:
In my graduation design, I need to acquire the data of biscuits from a video and then send it to a VC program. I've achieved the sending process correctly and the program can receive the data. But when I wanted to send a message from the VC program to LabVIEW, the TCP read error 57 occurred.
The TCP write VI and the TCP read VI are in different loops, and they use the same refnum. In the picture, the case structure in top while loop is the data acquiring program so I don't show them.
Can anybody teach me how to correct this program so it can receive data from the VC program? Thanks and forgive my poor English!Hi,
Today i haven't any problem on the connection. The file is not changed. I think the system held some processes those use the tcp connection. I didn't think to watch in the task manager. It is the only explanation that I can pop out. Anyway I put above the program that gave me that problem. Please, check if the application is bad-built and suggest to me an alternative. Thanks
The block linked over is send-receive packet, opened above. In the first frame the block above send a message on the tcp connection, then it waits 1 second, finally it waits for the answer on the same connection (8 seconds).
The tcp reading block returns error 57. No other request on the same connection is active. I let the timeout of the block to end every 50 ms, I ignore error 56 (timeout) end I terminate the loop execution if:
- a message of a least 5 character is received (application protocol specification).
- the timeout of the receiving block ends (8 seconds)
- a tcp error different from 56 turns out. -
Hello all,
I am a sysadmin at a 3 campus school, and am trying to extend our AD schema to include Exchange 2013 attributes so that we can configure groups synced to Office 365 using DirSync. However it keeps failing at the same point each time.
I have tried with RTM first, and then CU6, but I keep getting the same error and am unsure how to fix it.
"repadmin /showrepl" says that our 3 DCs are replicating with no issues, and I'm trying to extend the schema using an "Enterprise Admin"/"Schema Admin" account on our schema master DC.
Our domain/forest functional level is Server 2008R2, and we do not have an Exchange server set up already - if that helps.
The PowerShell error is:
PS C:\Users\rbbr\Desktop\Exchange> .\setup /PrepareSchema /IAcceptExchangeServerLicenseTerms
Welcome to Microsoft Exchange Server 2013 Cumulative Update 6 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis COMPLETED
Configuring Microsoft Exchange Server
Extending Active Directory schema FAILED
The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema89.ldf")
" was run: "Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to impor
t the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be
found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object ta
rget, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String
schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePip
elineIfFailed)".
The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.
And ldif.err says:
Entry DN: CN=ms-DS-GeoCoordinates-Altitude,CN=Schema,CN=Configuration,DC=kurnai,DC=lan
Add error on entry starting on line 452: Unwilling To Perform
The server side error is: 0x20bb Schema update failed: duplicate OID.
The extended server error is:
000020BB: SvcErr: DSID-032603C0, problem 5003 (WILL_NOT_PERFORM), data 8379
An error has occurred in the program
The schema attribute "CN=ms-DS-GeoCoordinates-Altitude,CN=Schema,CN=Configuration,DC=kurnai,DC=lan" does exist in the schema, but I don't know what to do or where to go from here.
Any assistance would be greatly appreciated.I just tried .\setup /PrepareAD /OrganizationName:kurnaicollege /IAcceptExchangeServerLicenseTerms, and got the exact same error as above.
Is there a way to delete the offending schema attributes, or to force its overwrite or something?
EDIT: I am also getting these eventvwr errors when running /PrepareAD, if it helps:
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
2
Proxy Instance Count
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.get_RawValue()
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
2756 vds
3540 NBBPassThruAuth_Helper
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
1452 Microsoft.ActiveDirectory.WebServices
1704 conhost
1540 svchost
4492 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
520 svchost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
4440 NBBPassThruAuth_Helper
3648 conhost
884 svchost
1080 vmtoolsd
3440 conhost
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
4760 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
1
Average Latency
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.IncrementBy(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.IncrementBy(Int64 incrementValue)
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
4136 NBBPassThruAuth_Helper
2756 vds
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
4260 conhost
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
3472 conhost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
3648 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
4580 NBBPassThruAuth_Helper
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
4436 conhost
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
1
Base for Average Latency
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.IncrementBy(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.IncrementBy(Int64 incrementValue)
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
4136 NBBPassThruAuth_Helper
2756 vds
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
4260 conhost
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
3472 conhost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
3648 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
4580 NBBPassThruAuth_Helper
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
4436 conhost
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 4027 from source MSExchange ADAccess cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ExSetup.exe
4768
Get Servers for kurnai.lan
TopologyClientTcpEndpoint (localhost)
3
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:02.1106192. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient(Boolean useCache)
at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
2
Time in Resource per second
MSExchange Activity Context Resources
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.get_RawValue()
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
2756 vds
4168 dwm
776 MsMpEng
2940 dllhost
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
712 WmiPrvSE
2088 dfssvc
1692 MSOIDSVCM
960 svchost
304 csrss
4436 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
4388 mmc
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
1644 MSOIDSVC
3416 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Activity Context Resources : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange activity context resources. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-OrganizationRelationship
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
34
00:00:00.0938055
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-OrganizationRelationship
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
34
00:00:00.0312685
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-AcceptedDomain
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
20
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-AcceptedDomain
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
20
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeSchema
-LdapFileName "Setup\Data\schema89.ldf"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
98
00:00:02.1887925
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
7
ExA2B06D
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeSchema
-LdapFileName "Setup\Data\schema89.ldf"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
98
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
7
ExA2B06D
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeOrganization
-Industry "NotSpecified" -PrepareDomain "True" -DomainController "C-Server1.kurnai.lan" -ActiveDirectorySplitPermissions $null -PrepareOrganization "True" -PrepareSchema "True" -OrganizationName "kurnaicollege"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
31
00:03:01.8261106
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Management.Deployment.ScriptExecutionException: The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema89.ldf")
" was run: "Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)". ---> Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
--- End of inner exception stack trace ---
7
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
Ex88D115
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table -
Installing Exchange 2013 SP1 - Errors MSExchange ADAccess & MSExchange Common
The topology first:
AD-server + Exchange-server
What I am trying to do is just install a full version of Exchange 2013 sp1.
But the problem is that install wizard freezes on the "initializing setup" page. Also eventviewer gives 2 different error messages, MSExchange ADAccess & MSExchange Common.
MSExchange ADAccess:
The description for Event ID 4027 from source MSExchange ADAccess cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local
computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ExSetup.exe
2964
Get Servers for mydomain.com
TopologyClientTcpEndpoint (localhost)
3
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:01.9984949. TCP error code 10061: No connection could be made because
the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient(Boolean useCache)
at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)
the message resource is present but the message is not found in the string/message table
MSExchange Common:
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
2
Time in Resource per second
MSExchange Activity Context Resources
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.get_RawValue()
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
1044 VSSVC
1064 spoolsv
4032 notepad
1416 svchost
700 dwm
3100 SMSvcHost
3616 msdtc
2564 csrss
336 csrss
424 winlogon
244 smss
688 LogonUI
2556 Taskmgr
596 svchost
1124 inetinfo
1920 svchost
1652 SMSvcHost
1400 svchost
2916 taskhostex
492 lsass
2688 dwm
396 wininit
484 services
1104 svchost
388 csrss
384 svchost
1896 svchost
3052 svchost
744 svchost
1180 mmc
3404 conhost
1800 explorer
3668 Setup
552 svchost
712 svchost
2864 svchost
2964 ExSetup
2948 rdpclip
2592 winlogon
900 svchost
808 svchost
4 System
1164 mqsvc
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Activity Context Resources : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange
activity context resources. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message tableI solved this problem or at least managed to get a workaround for it.
I tried to install Exchange using rdp connection and the installation media was mapped on my local computer. After I copied it to server itself, everything started to work and now I am able to send emails. -
TCP Callback function passing data to teststand
Hi,
I'm trying to pass data via a TCP Callback function to teststand using the TCP steptype that I downloaded from Ni.
When I open a connection, container data is passed to the dll on which it creates a connection, the dll in part creates a TCP Callback function.
The handle obtained from the connection is then passed back through the container data, and the dll returns back to the sequence editor which will execute the next steps.
The problem is that when the TCP Callback function gets an TCP_READY event it can not pass data to TestStand because it can not access the container data.
How can this TCP Callback function pass/alter data to/in Testand?
Thank you...Yes ThiCop,
That's exactly what I want to establish!
Here is the example code:
//Function needed by the TCP functions
int CVICALLBACK MsgHandler (unsigned handle, int event, int error, void *callbackData)
char receiveBuf[256] = {0};
char displayBuf[7] = {0};
char * tempLookup;
int dataSize = sizeof (receiveBuf) - 1;
switch (event)
case TCP_CONNECT:
break;
case TCP_DISCONNECT:
break;
case TCP_DATAREADY:
if ((dataSize = ClientTCPRead (handle, receiveBuf, dataSize, 1000)) > 0)
// Send data from receiveBuf to a variable in teststand ????
// TS_PropertyGetValString (HandleObject, NULL, "Step.Result.Data", 0, &tempLookup);
// TS_PropertySetValString (HandleObject, NULL, tempLookup, 0, receiveBuf);
else
receiveBuf[dataSize] = '\0';
break;
return 0;
void __declspec(dllexport) TX_TEST TCPConnectF(tTestData * testData, tTestError * testError)
int error = 0;
int TCPerror;
double Port;
double Timeout;
char *HandleLookup;
char *ServerAdd;
char *CallbackData;
ErrMsg errMsg = {'\0'};
ERRORINFO errorInfo;
tsErrChk (TS_PropertyGetValString (testData->seqContextCVI, &errorInfo, "Step.Result.Handle", 0, &HandleLookup));
tsErrChk (TS_PropertyGetValNumber (testData->seqContextCVI, &errorInfo, "Step.Result.Port", 0, &Port));
tsErrChk (TS_PropertyGetValString (testData->seqContextCVI, &errorInfo, "Step.Result.IP", 0, &ServerAdd));
tsErrChk (TS_PropertyGetValNumber (testData->seqContextCVI, &errorInfo, "Step.Result.Timeout", 0, &Timeout));
tsErrChk (TS_PropertyGetValString (testData->seqContextCVI, &errorInfo, "Step.Result.Data", 0, &CallbackData));
TCPerror = ConnectToTCPServer (((unsigned int *) &ConnectionHandle), ((unsigned int) Port), ServerAdd, MsgHandler, 0, Timeout);
if (TCPerror != 0)
//Get TCP Error Message
sprintf(errMsg,"%s",GetTCPErrorString ( TCPerror ));
error = TCPerror;
goto Error;
tsErrChk (TS_PropertySetValNumber (testData->seqContextCVI, &errorInfo, HandleLookup, 0, ((double) ConnectionHandle)));
Error:
// FREE RESOURCES
CA_FreeMemory(HandleLookup);
CA_FreeMemory(ServerAdd);
// If an error occurred, set the error flag to cause a run-time error in TestStand.
if (error < 0)
testError->errorFlag = TRUE;
testError->errorCode = error;
testData->replaceStringFuncPtr(&testError->errorMessage, errMsg);
return;
Maybe you are looking for
-
Calling Web Service from Tuxedo
We have a need to invoke a web service from our Tuxedo Server code (all in C++). Would SALT help us in this? Or is there another tool that we could use to act as a web service client? Thanks, -gc
-
In DB13, error occured after trigger Verify Database.
Dear All, The following is the job log of the Verify database, i am not sure why this error occured. I am using BRTOOLS 7.10 (12), SAP NetWeaver 2004s. Job started Step 001 started (program RSDBAJOB, variant &0000000000927, user ID BASISAD
-
0FI_AR_4 Enhance with fields common in BSID, BSAD
Greetings, I have a question about enhancing 0FI_AR_4. I have read the note 410799. The fields I want to add to the datasource are common in both BSID and BSAD tables. I see a structure CI_BSID in the extract structure but none for BSAD. So say if I
-
Video imported from Premiere plays slower in Flash
I have tried a variety of option including using a shorter clip and embedding the video upon import, stretching the audio in soundbooth and re-importing seperately, but it either does not work or is not satisfactory for my needs. Ultimately, this vid
-
Trying to use Disk Utility on my iMac --
I have had some extreme slowness on my iMac, particularly with Mail (launching and retrieving emails takes forever) so I am trying to use Disk Utility to see if I can locate and fix the problem. I'm trying to use the version of DU that's on my MacBoo