Video imported from Premiere plays slower in Flash

I have tried a variety of option including using a shorter
clip and embedding the video upon import, stretching the audio in
soundbooth and re-importing seperately, but it either does not work
or is not satisfactory for my needs. Ultimately, this video will be
playing on a loop on a website. How do I keep the video from
playing slower in flash than it does in Premiere? I'm an expert in
Premiere but I'm sorta just starting in Flash.
I should add that the website it will be on requires .swf
format

Similar Messages

I'm having trouble with video imported from my camera memory card.

I'm having trouble with video imported from my camera memory card.The video breaks up and pixelizes when it's directly imported from the memory card. That makes the video useless. Why does this happen? It doesn't do that in any other video editing software. Thanks for the help.

More info please:
Type of camera?
Was the card formatted in the camera doing the shooting?
Type of files the camera is set to record?
Al

Export video clip from Premiere into an existing Encore project

New to encore.....love the software so far....but not much experience with it yet. Here is my question:
How do I go about exporting a video clip from premiere CS3 into an open/existing encore project. When I try to export to encore from the prem. timeline it makes a new proj. Sometimes I want to render out and export more than one asset into the same encore proj. but cant seem to figure out how to do that. any help would be great.
Thanks,
Eric

thanks J.....I have been doing it all along the way that you suggested. Just wondered if there might be a more efficient way to bring in multiple files. I appreciate your help with this....now at least I know that I am not doing things in a more difficult manner than necessary.
Thanks again!
~Eric

Grading over a transition imported from Premiere Pro

Anyone out there have a simple, fast and relaible way to deal with grading over a cross dissolve imported from Premiere Pro?
How do you (can you) dissolve from one grading layer to another over the transiton clip? I have been having no luck at all with the dissolve feature in SpeedGrade.
If anyone from Adobe is out there listing, SpeedGrade needs a drag and drop cross dissolve effect / tool like Premiere.
Working on longer pieces with multiple cross dissolves - SpeedGrade almost becomes useless!
When can we expect a proper upgrade to SpeedGrade that will bring it in line with Premiere and After Effects?
Cheers.

Unless you turned on proofing, that would have no effect whatsoever.
It sounds like the root problem is that color managed applications are having problems displaying the color you expect - which means that you expect something unrealistic, or that your display profile doesn't match your actual display.

How do I get video imported from an iphone not recorded horizontally to look non-distorted?

How do I get video imported from an iphone not recorded horizontally to look non-distorted in imovie? thanks
micah

You can't edit a video out of iTunes.
You would have to edit the video from the original film, either on your computer, or iPhone.

How do I email video imported from camera?

How do I email video imported from digital camera? It is a short video not more than a couple minutes long. I am using a PowerBook G4.
Thanks for any help.

BGreg wrote:
Video's get big quickly, however, assuming it's not too big, just attach it to your email and send it along.
This isn't a reliable method because you just don't know what the limits are on both ends. It is much more reliable to use a free file transfer service like Dropbox, Box, Google Drive, Amazon Cloud Drive, YouTube, etc and just send an email link.
Eustace Mendis wrote:
You should compress the video file before transferring. Just click on the name video file and go to the File menu. Compress ... is there. The compressed file will have the same name as the original, with a .zip suffix.
That's not the way to compress a video file. Video files are already compressed using lossy codecs like H.264, and if you apply a lossless codec like ZIP you may end up with zero additional compression. In some cases, applying ZIP to a lossy compressed file may cause the file to become larger.
The correct way to compress a video is to export it from iMovie (or whatever) with the correct settings for the destination (email, YouTube, iPad, etc.).

Audio sync problem with videos imported from iPod Touch

I have an iPod Touch 4th Generation that I used to shoot video at a family birthday party. When I imported the footage into iMovie '11, the audio is not in sync with the video (video is about two seconds behind audio) and there is only the left channel of audio. I verified that the video on the iPod plays just fine--no audio sync problem, both left and right channels work. I just upgraded to iOS 5 on the iPod Touch. The iMac is running Snow Leopard 10.6.8.
As a workaround, I can import the video into iPhoto instead. When I play the video in iPhoto, there are no audio sync problems and both channels of audio can be heard. I have imported other iPod Touch videos successfully into iMovie '11 in the past few months, but this has been the first time these problems have occurred. Any help would be appreciated.

Premiere cannot handle clips with variable framerate.
Your converted clips need to have constant framerate.
Otherwise use a converter like Handbrake.

Video import from PAL camcorder

I have just bought a Canopus ADVC110 which converts analog video to digital and have it hooked into my Powerbook Pro via a firewire lead.
I have my analog PAL camcorder tied into the canopus and am attempting to import some PAL video but not getting very far.
I fire up iMovie and it does indeed detect the camera but when I create a new project it appears as DV-NTSC and not DV-PAL. I have changed the 'New Project frame rate' preference from 29.97 to 25 but still no good. When I click on Import I get the video/audio but the video is VERY jumpy and in black and white and the audio is totally garbled. As the video is PAL and the project says DV-NTSC this might be the issue? I would have thought that the Canopus would remove any PAL/NTSC issues as it is being converted to digital anyway? I don't know how to change the new project from DV-NTSC to DV-PAL, again I thought switching frame rate to 25 would have done this?
So, can anyone help me get a smooth video import onto the Apple? I dont care what resulting file format is as long as I can import and play it. I don't mind buying a different video application if necessary and do have Toast Titanium if that helps.
Many thanks,

It sounds like you may not have set the dip switches of the Canopus correctly to PAL.
See page 16 of instruction manual for the canopus ADVC110!
(I use the same one)

Problem with sound when import from Premiere into After Effects

Hi!
I imported a sequence from a Premiere Pro project using File -> Import -> Adobe Premiere Project...
The video in the sequence showed up in the After Effects project as a composition. However, the composition did not include the sound from the sequence! Is there a way to keep the sound from the sequence upon import into After Effects?
Thanks

i`m sorry about the screenshot size, but i could only upload pics with 605 px width.
Nevertheless it seems that you saved my day. looks like it was all about the scale to framesize thing.
thank you so much!!!!

Importing from Premiere Error

Hello, everyone!
Just bought the new CC suite today, and trying to work out a bug. I wanted to take advantage of AE's render farm capabilities, so I wanted to try to edit Premiere sequences in AE, and render from there. I have two issues: never really used AE before, and the following error: "AEGP Plugin Premiere Pro Import: Error reading project file. (5027 :: 12)" Does anyone know what this issue is?
In AE, I see all of the imported mediums from Premiere, however I don't see the edited timeline. Doesn't appear to be a corruption issue, just some sort of importing issue.
Thanks!

A'ight. Specs.
Core i7 4770K @ 4.5GHz
Asus Sabertooth Z87
Corsair RM850
Corsair Vengeance DDR3 1600MHz 16GB
Samsung 840PRO 256GB (OS & where Adobe software is installed)
Seagate 2TB 7200RPM HDD (Project Files)
WD 1TB 7200RPM HDD (Scratch Disk)
Seagate 80GB 7200RPM HDD (Exported Files)
Hitachi 5TB 7200RPM HDD (Raw video)
The original video was recorded in DXTory with the Lagarith Lossless codec, at varying FPS from 20 to 60. Audio is recorded separately, but in same container. Different files when editing though. 1920x1080 video. Audio is in the MP3 container, PCM 48000Hz, 16 bit for game, 24 bit for voiceover, one stereo for game sound, one mono for voiceover.
Will that be all?

Lightroom 5.5 Import from Catalog *very* slow performance.

Importing from a second catalog from a shoot is *very* slow with the last version or couple of versions of Lightroom. It's been about 20 minutes and the import is moving glacially slow and is only about 20% done.
Here are as many stats as I have:
iMac 27" 3.5Ghz Core i7, 32G of ram, 3T fusion drive (the late 2013 model maxed out)
Master catalog has 117,000 images in it.
The catalog I'm importing has 948 images in it.
CPU use during the import is 100% used by lightroom (note that the multiple CPUs can go to more than 100% so this means I think that one CPU is maxed out, though LR can sometimes take 500% of my CPUs during an export)
Lightroom is using 4.2G of RAM (10G free in activity monitor)
Hard drive is fairly full, but still has 366G free on it (so about 10%)
Lightroom Mobile sync is enabled (not on this folder I don't think) but says "service unavailable" at this point.
Lightroom is fully up to date (5.5) on both iMac and laptop (also a mac in case that matters). Both are up to date with the latest OS software.
How I did it was:
Export the shoot as a new catalog on my iMac
Transfer it to my laptop (smart previews only, no masters)
Edit images, metadata, etc
Transfer the entire folder back (.lrcat, previews, smart previews) to iMac
In my master catalog do an import from catalog
Waited for ages for checking for dupes (which I can understand with such a big catalog)
Selected to import all, changing metadata and develop edits, and selecting to put new images in the folder (not sure why it asked as there weren't any new images)
The last time I did an import I started it and then went out somewhere so I didn't notice how long it took, but this seems completely crazy. In the time it's taken to write this up it's now about 20 minutes later and the progress bar is maybe at the 33% range. It's still working away, it's just crazy crazy slow.
Anything to help out or debug would be greatly appreciated. I suspect it's pure size of the catalog, but 120k isn't outside the realm of what I've heard people say works fine, or maybe the Fusion drive (maybe the OS is trying to move files around behind the scenes)?
Either way this didn't seem to be an issue until the last couple of versions (I haven't gone and re-installed 5.4 or 5.3 to check) and it's starting to really frustrate me

Hi Jim,
Great suggestion! It opens perfectly fine on its own. I even went as far as re-exporting it once it loaded but am still experiencing the same issue. That same catalog loads perfectly fine on my assistant's iMac.
I can't really think about anything that changed in my environment with the exception of a new Bootcamp partition to run windows on an external Thunderbolt HD but I doubt this is related.
I'm open to any suggestions while I am trying this again... 10 minutes of 'Checking for changed and duplicate photos'.

In transferring a video file from iPhone 4s to a flash drive then to a Axer FHD-45 pocket projector the image turns upside down. It is right side up in the computor and the flash drive. Any help?

In transferring a video from iPhone 4s to a flash drive then to a Axer FHD-45 pocket projector the image is upside down. It is right side up in the computor and the flash drive. Any help?

Have you tried transferringing the videos via usb (sinc you're having trouble transferring them with PhotoSync) as described here: http://support.apple.com/kb/HT4083 and just transferring the photos with PhotoSync?

Importing from premiere pro cs5 to after effects cs5

hi, can anyone help me with this problem?
im editing some stuff in premiere pro cs5 and when i import it into after effects cs5 for colour correction and other effects all the transitions that i had from premiere will disappear. if someone can guide me step by step to this process it will be very helpful
Thanks,
Randolph Azzopardi

As Mylenium suggests, there are many ways to move information between Premiere Pro and After Effects.They are all outlined on this page: "Working with After Effects and Premiere Pro"
You didn't specify, but I'll assume as he did that you are exporting a Premiere Pro project from After Effects. That works by converting things from native After Effects to their equivalents in Premiere Pro; sometimes there isn't a good equivalent, so the conversion isn't perfect. The same conversion is done as is done for copying and pasting between After Effects and Premiere Pro. There's a set of tables that describe the conversions here.
The way to get perfect fidelity is to either use Dynamic Link (as Mylenium suggested) or render and export a movie from After Effects and import that into Premiere Pro.

Lightroom: Capture time for videos imported from iphoto is not showing in metadata

Hi, I imported all my photos and videos from iphoto to Lightroom recently using the iphoto import plugin. I think all my photos were imported but I noticed that all my videos have no capture time, so they became grouped together in my collections. But I think I can still see their capture time in the "grey text" in each photo. Why did this happen and how do I resolve this issue? I really want my capture times to be in the video metadata and also want to see my videos in the right chronological order with my videos. Strangely, videos imported into Lightroom directly from my camera SD card do not have this issue, only the ones imported from iphoto do. Thanks!

LR does not properly handle video metadata in general, and in particular it often botches capture time. Sometimes this works: Select one video, do Metadata > Edit Capture Time, and then click Change All (without actually changing Corrected Time). If that sets the capture time to the correct time, then you can select all the problem videos, do Metadata > Edit Capture Time, and click Change All. If you have a small number of videos, you can manually correct the capture time using Edit Capture Time.
Please see this thread in the official Adobe feedback forum for more details, vote on it, and add your opinion: Lightroom: Metadata applied to videos in Lightroom isn't available in other applications

Encore CS6 crashes when importing from Premiere Pro CS6

When sending a project to Encore as a Dynamic Link from Premiere Pro, Encore hangs then a message pops up that it has stopped responding then closes. How do we get this to work?
The computer has an Intel Core i7 processor, 16GB of RAM and is running Windows 7 Pro x64 with Service Pack 1. Adobe CS6 Master Collection is installed. The computer is joined to a Windows Server 2012 domain and the user of the machine has local administrator rights.
The Adobe suite has been uninstalled and re-installed multiple times without success. Sometimes after re-installing, sending a Dynamic Link to Encore will import as expected once, but then after restarting the computer, the problem will occur again. This has been tried with and without installing any Adobe updates. The system has also been wiped and had Windows and all software clean installed on it again which has not resolved the problem.

More below... may not help, but does say that the programs are not designed to work on a network, and may not
Some? versions of Premiere do not work properly, if at all, over a network
-see messages #1 and #3 in http://forums.adobe.com/thread/771151
-you MUST give all users administrator accounts to use Premiere
-and especially Encore dual layer http://forums.adobe.com/thread/969395
-a work around, of sorts http://forums.adobe.com/thread/957523
-and not on a "domain" http://forums.adobe.com/thread/858977
-http://helpx.adobe.com/premiere-pro/kb/networks-removable-media-dva.html

Video imported from Premiere plays slower in Flash

Similar Messages

Maybe you are looking for